(Blue Planet MCP R18.06 Release Notes) 08.01 PDF

Blue Planet MCP Release Notes
Release 18.06 Standard Issue 08.01, September 2018

Table of Contents
Legal notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Ciena software license . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Publication history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
September 2018 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
April 2018 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

January 2018 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
October 2017 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
July 2017. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

July 2017. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

February 2017. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
About this document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Documentation download . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Blue Planet MCP Release 18.06 Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Network Element Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Liquid Spectrum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Software Upgrade Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
OnePlanner Release Alignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Platform Improvements Added in MCP 18.06 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Release Notes for Blue Planet MCP Release 18.06. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Blue Planet MCP Release 18.06 Release Notes (known feature implementation limitations). . . . . . . . 18
Deployment Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Offline Planning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
MCP Export . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Running FTV/ALE on MCP Exported networks in OnePlanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
MCP Import and Commit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
HA / Restarts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Service Management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Service Discovery & Visualization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Service Provisioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Blue Planet MCP Release 18.06 Release Notes (new items) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Liquid Spectrum 1.2 Release Notes (new items) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Blue Planet MCP Release 18.06 Release Notes (release note items from previous releases) . . . . . . . 30
FOSS disclosure document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Blue Planet MCP Release Notes, Release 18.06 Legal notices
Legal notices
THIS DOCUMENT CONTAINS CONFIDENTIAL AND TRADE SECRET INFORMATION OF CIENA
CORPORATION AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE OR
DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE, OR SELL ANYTHING THAT IT MAY DESCRIBE.
REPRODUCTION, DISCLOSURE, OR USE IN WHOLE OR IN PART WITHOUT THE SPECIFIC WRITTEN
AUTHORIZATION OF CIENA CORPORATION IS STRICTLY FORBIDDEN.
EVERY EFFORT HAS BEEN MADE TO ENSURE THAT THE INFORMATION IN THIS DOCUMENT IS
COMPLETE AND ACCURATE AT THE TIME OF PUBLISHING; HOWEVER, THE INFORMATION CONTAINED
IN THIS DOCUMENT IS SUBJECT TO CHANGE.
While the information in this document is believed to be accurate and reliable, except as otherwise
expressly agreed to in writing CIENA PROVIDES THIS DOCUMENT "AS IS" WITHOUT WARRANTY OR
CONDITION OF ANY KIND, EITHER EXPRESS OR IMPLIED. The information and/or products described in
this document are subject to change without notice. For the most up-to-date technical publications, visit
www.ciena.com.
Copyright © 2016-2018 Ciena® Corporation. All Rights Reserved
The material contained in this document is also protected by copyright laws of the United States of
America and other countries. It may not be reproduced or distributed in any form by any means, altered in
any fashion, or stored in a data base or retrieval system, without express written permission of the Ciena
Corporation.
Security
Ciena © cannot be responsible for unauthorized use of equipment and will not make allowance or credit
for unauthorized use or access.
Table 1. Contacting Ciena
CORPORATE HEADQUARTERS 410-694-5700 OR 800-921-1144 WWW.CIENA.COM
Customer Technical Support/Warranty
in North America 1-800-CIENA24 (243-6224)
410-865-4961
in Europe, Middle East, and 800-CIENA-24-7 (800-2436-

Africa 2247)
+44-207-012-5508
00 0800 77 454 (Slovenia)
Standard Issue 08.01 ©2018 Ciena Corporation. All rights reserved. September 2018 | Page 1
Blue Planet MCP Release Notes, Release 18.06 Legal notices
CORPORATE HEADQUARTERS 410-694-5700 OR 800-921-1144 WWW.CIENA.COM
in Asia-Pacific 800-CIENA-24-7 (800-2436-

2247)
+81-3-6367-3989
+91-124-4340-600
120 11104 (Vietnam)
000 8004401369 (India)
in Caribbean and Latin America 800-CIENA-24-7 (800-2436-

2247)
1230-020-0845 (Chile)
009 800-2436-2247 (Colombia)
0800-77-454 (Mexico and Peru)
00 008000442510 (Panama)
Sales and General Information North America: 1-800-207-3714 E-mail: [email protected]

International: +44 20 7012 5555
in North America 410-694-5700 or 800-207-3714 E-mail: [email protected]
in Europe +44-207-012-5500 (UK) E-mail: [email protected]
in Asia +81-3-3248-4680 (Japan) E-mail: [email protected]
in India +91-22-42419600 E-mail: [email protected]
in Latin America 011-5255-1719-0220 (Mexico E-mail: [email protected]

City)
Training E-mail: [email protected]
For additional office locations and phone numbers, please visit the Ciena site at www.ciena.com.
Blue Planet MCP Release Notes, Release 18.06 Ciena software license
Ciena software license

READ THIS LICENSE AGREEMENT (“LICENSE”) CAREFULLY BEFORE INSTALLING OR USING CIENA
SOFTWARE OR DOCUMENTATION. THIS LICENSE IS AN AGREEMENT BETWEEN YOU AND CIENA
COMMUNICATIONS, INC. (OR, AS APPLICABLE, SUCH OTHER CIENA CORPORATION AFFILIATE
LICENSOR) (“CIENA”) GOVERNING YOUR RIGHTS TO USE THE SOFTWARE. BY INSTALLING OR USING
THE SOFTWARE, YOU ACKNOWLEDGE THAT YOU HAVE READ THIS LICENSE AND AGREE TO BE BOUND
BY IT.
1. License Grant. Ciena may provide “Software” to you either (1) embedded within or running on a
hardware product or (2) as a standalone application, and Software includes upgrades acquired by you
from Ciena or a Ciena authorized reseller. Subject to these terms, and payment of all applicable
License fees including any usage-based fees, Ciena grants you, as end user, a non-exclusive, non-
transferable, personal License to use the Software only in object code form and only for its intended
use as evidenced by the applicable product documentation. Unless the context does not permit,
Software also includes associated documentation.
2. Open Source and Third Party Licenses. Software excludes any open source or third-party programs
supplied by Ciena under a separate license, and you agree to be bound by the terms of any such
license. If a separate license is not provided, any open source and third party programs are considered
“Software” and their use governed by the terms of this License.
3. Title. You are granted no title or ownership rights in or to the Software. Unless specifically authorized
by Ciena in writing, you are not authorized to create any derivative works based upon the Software.
Title to the Software, including any copies or derivative works based thereon, and to all copyrights,
patents, trade secrets and other intellectual property rights in or to the Software, are and shall remain
the property of Ciena and/or its licensors. Ciena’s licensors are third party beneficiaries of this
License. Ciena reserves to itself and its licensors all rights in the Software not expressly granted to
you.
4. Confidentiality. The Software contains trade secrets of Ciena. Such trade secrets include, without
limitation, the design, structure and logic of individual Software programs, their interactions with other
portions of the Software, internal and external interfaces, and the programming techniques employed.
The Software and related technical and commercial information, and other information received in
connection with the purchase and use of the Software that a reasonable person would recognize as
being confidential, are all confidential information of Ciena (“Confidential Information”).
5. Obligations. You shall:
i. Hold the Software and Confidential Information in strict confidence for the benefit of Ciena using
your best efforts to protect the Software and Confidential Information from unauthorized
disclosure or use, and treat the Software and Confidential Information with the same degree of
care as you do your own similar information, but no less than reasonable care;
ii. Keep a current record of the location of each copy of the Software you make;
iii. Use the Software only in accordance with the authorized usage level;
iv. Preserve intact any copyright, trademark, logo, legend or other notice of ownership on any original
or copies of the Software, and affix to each copy of the Software you make, in the same form and
location, a reproduction of the copyright notices, trademarks, and all other proprietary legends
and/or logos appearing on the original copy of the Software delivered to you; and
v. Issue instructions to your authorized personnel to whom Software is disclosed, advising them of
the confidential nature of the Software and provide them with a summary of the requirements of
this License.
6. Restrictions. You shall not:
i. Use the Software or Confidential Information a) for any purpose other than your own internal
business purposes; and b) other than as expressly permitted by this License;
ii. Allow anyone other than your authorized personnel who need to use the Software in connection
with your rights or obligations under this License to have access to the Software;
iii. Make any copies of the Software except such limited number of copies, in machine readable form
only, as may be reasonably necessary for execution in accordance with the authorized usage level
or for archival purposes only;
iv. Make any modifications, enhancements, adaptations, derivative works, or translations to or of the
Software;
v. Reverse engineer, disassemble, reverse translate, decompile, or in any other manner decode the
Software;
vi. Make full or partial copies of the associated documentation or other printed or machine-readable
matter provided with the Software unless it was supplied by Ciena in a form intended for
reproduction;
vii. Export or re-export the Software from the country in which it was received from Ciena or its
authorized reseller unless authorized by Ciena in writing; or
viii. Publish the results of any benchmark tests run on the Software.
7. Audit: Upon Ciena’s reasonable request you shall permit Ciena to audit the use of the Software to
ensure compliance with this License.
8. U.S. Government Use. The Software is provided to the Government only with restricted rights and
limited rights. Use, duplication, or disclosure by the Government is subject to restrictions set forth in
FAR Sections 52-227-14 and 52-227-19 or DFARS Section 52.227-7013©(1)(ii), as applicable. The
Software and any accompanying technical data (collectively “Materials”) are commercial within the
meaning of applicable Federal acquisition regulations. The Materials were developed fully at private
expense. U.S. Government use of the Materials is restricted by this License, and all other U.S.
Government use is prohibited. In accordance with FAR 12.212 and DFAR Supplement 227.7202, the
Software is commercial computer software and the use of the Software is further restricted by this
License.
9. Term of License. This License is effective until the applicable subscription period expires or the
License is terminated. You may terminate this License by giving written notice to Ciena. This License
will terminate immediately if (i) you breach any term or condition of this License or (ii) you become
insolvent, cease to carry on business in the ordinary course, have a receiver appointed, enter into
liquidation or bankruptcy, or any analogous process in your home country. Termination shall be
without prejudice to any other rights or remedies Ciena may have. Upon any termination of this
License you shall destroy and erase all copies of the Software in your possession or control, and
forward written certification to Ciena that all such copies of Software have been destroyed or erased.
Your obligations to hold the Confidential Information in confidence, as provided in this License, shall
survive the termination of this License.

10. Compliance with laws. You agree to comply with all laws related to your installation and use of the
Software. Software is subject to U.S. export control laws, and may be subject to export or import
regulations in other countries. If Ciena authorizes you to import or export the Software in writing, you
shall obtain all necessary licenses or permits and comply with all applicable laws.
11. Limitation of Liability. ANY LIABILITY OF CIENA SHALL BE LIMITED IN THE AGGREGATE TO THE
AMOUNTS PAID BY YOU TO CIENA OR ITS AUTHORIZED RESELLER FOR THE SOFTWARE. THIS
LIMITATION APPLIES TO ALL CAUSES OF ACTION, INCLUDING WITHOUT LIMITATION BREACH OF
CONTRACT, BREACH OF WARRANTY, NEGLIGENCE, STRICT LIABILITY, MISREPRESENTATION AND
OTHER TORTS. THE LIMITATIONS OF LIABILITY DESCRIBED IN THIS SECTION ALSO APPLY TO ANY
LICENSOR OF CIENA. NEITHER CIENA NOR ANY OF ITS LICENSORS SHALL BE LIABLE FOR ANY
INJURY, LOSS OR DAMAGE, WHETHER INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
INCLUDING WITHOUT LIMITATION ANY LOST PROFITS, CONTRACTS, DATA OR PROGRAMS, AND
THE COST OF RECOVERING SUCH DATA OR PROGRAMS, EVEN IF INFORMED OF THE POSSIBILITY
OF SUCH DAMAGES IN ADVANCE.
12. General. Ciena may assign this License to an affiliate or to a purchaser of the intellectual property
rights in the Software. You shall not assign or transfer this License or any rights hereunder, and any
attempt to do so will be void. This License shall be governed by the laws of the State of New York
without regard to conflict of laws provisions. The U.N. Convention on Contracts for the International
Sale of Goods shall not apply hereto. This License constitutes the complete and exclusive agreement
between the parties relating to the license for the Software and supersedes all proposals,
communications, purchase orders, and prior agreements, verbal or written, between the parties. If any
portion hereof is found to be void or unenforceable, the remaining provisions shall remain in full force
and effect.
Blue Planet MCP Release Notes, Release 18.06 Publication history
Publication history
September 2018
Standard Issue 08.01 of the Blue Planet Manage, Control and Plan 18.06 Release Notes
April 2018
Standard Issue 07.02 of the Blue Planet Manage, Control and Plan 18.02 Release Notes
Standard Issue 07.01 of the Blue Planet Manage, Control and Plan 18.02 Release Notes.
January 2018
October 2017
Standard Issue 04.01 of the Blue Planet Manage, Control and Plan 17.06.02 Release Notes.
July 2017
July 2017
February 2017
Blue Planet MCP Release Notes, Release 18.06 About this document
About this document

This Release Notes document is used to inform customers of known problems. Release Notes describe
problems that could not be resolved prior to release and where customers may notice their effects.
The information contained in this document is primarily intended for:
• Strategic and network systems development engineers (assess and evaluate the network evolution
requirements).
• Test and certification engineers (laboratory and field verification qualification).
• Network engineering implementation.
• Network operations and administrators.
• Second and third level support.
This document details the release notes that have been identified in Blue Planet MCP Release 18.02 and
the workaround where available.
Documentation download
You can download Blue Planet MCP documents and other related documents from https://my.ciena.com.
To download a document, perform the following steps:
1. As a registered user with a my.ciena.com account, log into https://my.ciena.com.

2. Once you are logged in, click the Documentation tab.
3. Click the Technical Publications tab and then click Libraries.
4. Scroll through the list of libraries displayed and select Blue Planet Manage, Control and Plan
Technical Publications.
5. Click the required release.
6. Find the document you want to download and click the link.
7. Download the document.
Blue Planet MCP Release Notes, Release 18.06 Blue Planet MCP Release 18.06 Summary
Blue Planet MCP Release 18.06 Summary

Network Element Support
A summary of the features supported by Blue Planet Manage, Control and Plan (MCP) Release 18.06 are
identified in this section.
Network Element Support • 6500-S 11.1, 11.2, 12.0, 12.1, 12.2, 12.3
• 6500-T 12.0, 12.1, 12.2, 12.3
• 6500-S/T Packet Fabric 12.1, 12.3
• CPL AMP 11.1, 11.2, 12.0, 12.1, 12.2, 12.3
• Waveserver 1.3, 1.4,1.5, 1.5.1, 1.6
• Waveserver Ai 1.0, 1.1, 1.2
• 5400 4.3, 4.3.1, 4.4
• 39xx and 51xx Packet Networking devices
SAOS 6.15, 6.16, 6.16.1, 6.17, 6.17.1
• 3926/3928 SAOS 6.17, 6.17.1
• 5170 SAOS 8.6.1
• 8700 SAOS 8.5, 8.6, 8.6.0.5
• 6200 (packet configurations only) 2.0, 2.1
Platform Features • MCP High Availability & scalability (2+1)

• Geographic Redundancy warm standby
• Geographic Redundancy Active Standby
• Geographic Redundancy with Single-Host GR
Sites
• Platform external health alerts
• Geographic map alarm management, multi-
select features
• Map Enhancements (NE tagging, Link tagging,
NE filtering including by partition, NE action
buttons – synch, alarms)
• SLV: Navigation to Alarm List from Alarmed
Equipment and Alarm Counters
• Alarm-to-service correlation
• Service-to-alarm correlation
• Grid-based Alarm Browser
• Configurable Event Watch List (for alarms)
• Report Generation (various fixed reports)
• IPv4/IPv6 support
• RHEL 7.x, Oracle Linux 7.x, CentOS 7.x
• Network Partitioning (NE Level)
• Object Browser Export to CSV
• Platform Configuration Framework & UI
• Custom Time zone Handling
• Set 6500 License Server IP (Bulk & Per-Node)
• Patch/Upgrade Management (Phase 1 – CLI)
• 1C to MCP Migration Support
• External LDAP Authentication and
Authorization
API • NBI and Southbound separate physical/virtual

interfaces
• Layer 0 Topology/Service Inventory
• REST API for LLDP Snooping & L1 OTU Trail
Trace
Layer 2 Infrastructure and Services • MPLS-TP static tunnel management

Note: G.8032 is not a supported config in MCP (discovery, visualization, provisioning) on 6500
18.06. Also 6500 eMOTR and 5400 ESLM are not Packet Fabric, 8700 and MPLS-capable SAOS
supported in MCP 18.06. 6.x PN devices
• Dynamic MPLS – Co-routed Bi-Dir on 8700 and
MPLS-capable SAOS 6.x PN devices
• Service assurance for MPLS-TP static tunnels
• ELINE services over Q-in-Q
• ELINE and ELAN services over MPLS
• ELAN Service Management over static MPLS
with QinQ spurs
• ETree over Static MPLS
• Multicast (Drop and Continue)
• 2 and 3 Endpoint ELINE with Protected PW (SS-
PW / MS-PW)
• Service OAM (802.1ag & Y.1731) for ELINE
services
• Node and port commissioning
• Bandwidth management for ELINE services
• PCE enhancements including diversity and
routing constraints
• LAG on SAOS 6.x/8.x devices
• Circuit emulation on SAOS 6.x/8.x and 6200
devices
• RFC 2544
• Support for Virtual Link Loss Indicator (VLLI)
configuration during service provisioning
• Support for Virtual Private Wire Service (VPWS)
• Ability to edit Service parameters (EIR/CIR, port
settings, CVID Bundle, Y.1731) post activation
• Support for SNMP v3 for Authentication with
SAOS devices
• Support for SNMP Informs
• Packet Infrastructure Operational Status &
Retain LLDP
• Port Enable/Disable via UI
Switched OTN Infrastructure and Services • Basic 6500-S OTN CP Permanent SNC
(Discovery, Visualization, & Provisioning)
• Basic 6500-S OTN CP Permanent SNCP
(Discovery, Visualization, & Provisioning)
• Complex 6500 CP SNCP 1+1 Configs
• OSRP Links & Routing DTLSETs (Discovery &
Visualization)
• Switched OTN Circuit Packs (6500-S):
◦ OTN IF Flex 16xSFP
◦ PKT/OTN IF 100G (WL3n & 10xXFP)
◦ PKT/OTN IF 100G/2x40G
◦ PKT/OTN Fabric (1600G & 3200G) MCP
High Availability & scalability (2+1)
• Manual Topology Support
• Routing constraints: admin weight, latency
• Switched OTN on 5400
• Comprehensive OSRP Link/Line Attributes
• Operational State Management for OSRP
Link/Line and SNC/SNCP
Layer 0 Infrastructure and Service Features • 6500 Configurations (Note: 100% FixedGrid or
FlexGrid, no mix this release)
FlexGrid
• CD (CCMD12 – SMD – MLA/XLA – 1x9 WSS)

• CD (CCMD12 – 1x 9 WSS) Direct Attach to DIA
• CDA (CCMD12 – SMD – 1X9 WSS)
• CDC (CCMD 8x16 with 1x20)
• Colored ROADM (CMD44 with 1X9WSS)
(discovery/ visualization/ troubleshooting)
• CDA: CMD64 - XLA/MLA – 1X20WSS
• CDA: CMD44 - XLA/MLA – 1X20WSS
• CDC: CMD44 – BMD2 – XLA/MLA – 1X20WSS
• CDC: CMD44 (100GHz) – XLA/MLA –
1X20WSS
• CDA: CMD44 - 1X20WSS
• CD: CMD44 – BMD2 – XLA/MLA – 1X9WSS
• CMD64 with 1X9WSS
• GMD10 DIA (6500 12.2)
• GMD10 with CCMD12 (6500 12.2)
• 1X5RLA with CMD64
• Thin Terminal (CMD44, CMD64,CCMD12)
FixedGrid
• Colored ROADM Thin Terminal (discovery/

visualization/ troubleshooting)
• Colored ROADM: CMD44 with 1X9WSS
(discovery/ visualization/ troubleshooting)
• CMD44 with 100Ghz WSS
• Colorless (CD/CDA/CDC) ROADM
• Passive DWDM (PPC6 with OMDF4/OMDF8)
(Discovery, Visualization, and Troubleshooting)
Layer 0 Infrastructure and Service Features • Waveserver configurations

(continued)
◦ Waveserver Ai & WL3 client service
discovery and visualization
◦ Waveserver Ai & WL3 Photonic Service
management
◦ WL3 service management over
unsupported photonic configurations
◦ WLAi service planning
• Submarine Repeater Scan
◦ Equivalent capabilities as provided in
OneControl for Repeater Systems managed
by 6500 ISS/OSIC
◦ Includes: Invoke, schedule, View, Set
Baseline, Import, Export
◦ TE Subcom (Linear) repeater system
• Clients / Transponders
◦ 100G OCI & 10X10MUX OCI
◦ 200G OCI (100 GE Client only)
◦ 2X10GOTR & 4X10GOTR
◦ WL3n (100G MOTR & 100G OTR)
◦ 1+8MOTR
◦ WL2 & WL3 Transponders
◦ WLAi MOTR (without integrated OPS) Client
& Line
◦ WLAi FOTR (without integrated OPS) Line
◦ WLAi FOTR (without integrated OPS) Client
(discovery, visualization, troubleshooting)
◦ Client TPT (discovery visualization,
troubleshooting) for 100G OCI, 10X10G OCI
& WL3n Client cards
◦ OTU2/OTU4 Client Regens; non-
OTU2/OTU4) Client Regens (discovery,
visualization, troubleshooting)
◦ Client Rates: 1GE/STM-16/OTU1, OTU2,
OTU2e, 10GE, OC192, STM64, 100GE, OTU4
◦ QPSK, 16QAM, 4ASK modulation on all the
supported transponders
Layer 0 Infrastructure and Service Features • Clients / Transponders

(continued)
◦ 8 QAM modulations (discovery,
visualization, troubleshooting) on all the
supported transponders
◦ Line OPS (discovery, visualization) on all
the supported transponders
• Manual revert to home path for MR-SNC
• PCE routing enhancements to support latency
• Implicit frequency assignment
• Support for non-inclusive protect paths
• Service Inventory categorized by photonic
service, client service and SNC
• Layer Rate displayed for photonic and client
services
• Customer Name and Note fields added to
service definition
• MR-SNC on all supported photonic
configurations, transponders and modulations
• Un-protected wavelength services that are
FlexGrid control enabled using P-SNC
• CMD-CMD service that are FlexGrid enabled
• On-line planning of supported services
(Broadband, Wavelength)
• On-line planning equipment to support services
(Client, Line)
• View Operational Measurement and Power
PMs correlated to a service
• View Operational state of a service
Liquid Spectrum
BP MCP 18.06 aligns with Liquid Spectrum Release 1.2.
Liquid Spectrum enables customers to extract the maximum value from their infrastructure investment.
Liquid Spectrum applications are enabled with the MCP Plus license. The functionality is integrated within
the MCP user interface and APIs.
• Performance Meter application:

◦ Channel Margin Gauge – provides actual SNR margin per channel, using real-time network data
◦ Planning Tool Calibrator – provides actual fiber span loss and plan reconciliation, using real-time
network data
• Wave-Line Synchronizer application – synchronizes the settings of the transponders with the photonic
lines to which they are connected, reducing manual provisioning steps
• Bandwidth Optimizer application – Given the total capacity requirement from point A to Z, Bandwidth
Optimizer provides the optimum configuration and channel placement based on customer-defined
margin policies. This simplifies and accelerates service turn-up, so that operators can quickly respond
to new service demands using existing network resources
Software Upgrade Support

Upgrade to MCP 18.06 from MCP 17.10 or MCP 18.02 is supported.
OnePlanner Release Alignment

OnePlanner 6.0.1808 aligns to MCP 18.06.
Blue Planet MCP Release Notes, Release 18.06 Platform Improvements Added in MCP 18.06
Platform Improvements Added in MCP

18.06
A summary of the Platform improvements added in Blue Planet Manage, Control and Plan (MCP) Release
18.06 are identified in this section.
Troubleshoot System Troubleshooting
• Audit log dashboard

◦ Audit messages for user actions
• EMS alarms
◦ Alarms for critical EMS events (LOA / GOA, NE sync, NE backup failure, NE
upgrade failure)
• Reduction in volume of logs
• Option to soft-delete a service
◦ Intent can be removed from MCP if mismatch with discovered network
• Un-manage / Manage an NE Temporary state that will result in no active session
and no event processing
Stitch Reliable Network Stitching
• Ensure discovered services remain stitched during an LOA/GOA or resync

• Introduce the ability to differentiate between fully stitched and partially stitched
services
Provisioning Provisioning Failure Handling
• PM collection (or other intensive NE operations) better handled to reduce

interference with NE provisioning
• Improve user communication around provisioning timeouts
Memory Memory Footprint
• Update system engineering guidelines based on maximum usage

• Engineer to ensure site survival with a one host failure
• Reduce / tune memory consumption without architectural changes
• Improved tools
Blue Planet MCP Release Notes, Release 18.06 Platform Improvements Added in MCP 18.06
Unsupported Unsupported configurations
• Characterization of the tolerance for unsupported configurations.

• Test and validation of key known config gaps in MCP.
Blue Planet MCP Release Notes, Release 18.06 Release Notes for Blue Planet MCP Release 18.06
Release Notes for Blue Planet MCP Release

18.06
The following release limitations are known issues in Blue Planet Manage, Control and Plan (MCP)
Release 18.06.
This chapter includes the following sections:
• Blue Planet MCP Release 18.06 Release Notes (known feature implementation limitations)
• Blue Planet MCP Release 18.06 Release Notes (new items)
• Liquid Spectrum 1.2 Release Notes (new items)
• Blue Planet MCP Release 18.06 Release Notes (release notes items from previous releases)
Blue Planet MCP Release 18.06 Release Notes (known

feature implementation limitations)
Blue Planet MCP Release 18.06 includes the following limitations.
Deployment Configurations
Due to a software limitation, MCP Release 18.06 should not be deployed in a single-host configuration on
a VM or bare metal server with 32GB RAM. Doing so may have a detrimental effect on the stability of the
system after a few days of operation. This limitation will be addressed in an upcoming patch for MCP
18.06. This software limitation does not apply to a multi-host configuration, or to any configuration where
the server(s) are equipped with at least 64GB RAM.
Offline Planning
MCP Export
• MR-SNCs are excluded from the export (note that DTLs are exported)
• Incomplete Export of Planned/Committed (non-discovered) Fiber Routes (that is, planned over
planned scenario) control plane info, including OSRP links/lines and Control Plane mode, not included
for Planned/Committed projects differential provisioning data not included for Planned/Committed
projects
• Networks with duplicate site ids not supported (various issues in OnePlanner)
• Some P-SNCs do not retain path and/or spectral assignment upon export (that is, status is Placed
instead of Assigned when imported into OnePlanner)
• Export performed while long-running updates to NSI (for example, NE “synch”, service provisioning,
project commit/cancel) are taking place may result incomplete or “corrupt” exports, do not do exports
when doing things like network sync
Running FTV/ALE on MCP Exported networks in OnePlanner

• All DWDM interface adjacencies are assumed to be provisioned with default system settings and
calculates viability based on those default settings. There is currently no way to confirm if default
values are actually used.
• No support for OSC pad detection for MLAx amps
• It is assumed that all mod class biases are set to default values
• Fiber losses measured and calculated by MCP:
◦ Calculated based on the delta in powers measured at either end of the fiber.
◦ OSCSPANLOSS is not used, so there has to be at least one wavelength on each fiber
• It is the responsibility of the user to check the measured vs planned values of fiber loss to ensure the
resulting link budget is acceptable.
• FTV is not blocked from running when there is missing fiber data (currently results in errors)
• FTV crashes when CCMD8x16 is missing at intermediate nodes when “UDP/DTL” option is selected in
Path Options
• WLAi card support: only be available in power mode in 5.0.5 release.
MCP Import and Commit

• MCP does not screen the imported network to check that it is “supported” by the current version of
MCP (eg: no formal filtering of Fixed-grid designs coming from OnePlanner in 17.06). MCP behaviour
is undefined for unsupported equipment.
• No checking of modified imported network to ensure that modifications are supported in workflow.
Currently only equipment additions are supported. Equipment removal or edits are not supported.
MCP behaviour is undefined for removals or edits.
• Services created during the OnePlanner session will not be included in the MCP import in 17.06
• Services cannot be planned via MCP over any new photonic equipment from a new fiber route planned
in the OnePlanner offline planning workflow.
HA / Restarts
Overview
For the scenario of solution restart or concurrent reboot of the 3 hosts in a 2+1 MCP cluster you may
intermittently (30% frequency) see ~1% - 10% of Network Elements continuously reported in an endless
"Syncing" state. Reset/resync of these nodes to clear’.
Service Management
Service Discovery & Visualization

• Visualization of MR-SNC always shows the current (active) path. If the SNC has been restored multiple
times, there is no indication on the UI of its home path or previously restored paths. The user will need
to view the OTU4 or OTUCn/ODUCn to find the active path.
Service Provisioning
• Limitations on creating line services on WL3 and WLAi transponders cards connected to the same
CMD:
a. The first service on the first transponder (that is, WL3 or WLAi) should be created successfully. It is
recommended to provision the WL3 service before provisioning the WLAi service on the same CMD
if the user will be expanding the SNCG in future services.
b. When creating the first service on a second transponder (that is, WL3 or WLAi), the user should
enter a frequency and specify a new SNCG.
c. When creating additional services on either transponder, the user should either:
1. Select the SNCG already created for the previous service on the same CMD with similar
Transponders and do not specify the frequency or
2. Enter a new frequency and enter a new SNCG.
• When reusing an exisitng SNCG for an WLAi line service, the user must select AutoAssign for the
frequency otherwise the Get Path will fail if the frequency is manually specified. Alternatively, the user
can auto assign or create a new SNCG and manually specify the frequency.
• Expansion of SNCG brownfield (discovered SNCG) is not supported. If the user selects a discovered
SNCG in the drop down during service provisioning, they will see an error message “User specified
bundle name, <SNCG>, cannot be found in the Network”. The error message is misleading. The SNCG
should be filtered from the drop-down list.
• For services that have multiple possible backup paths the find routes function during service
provisioning will time out (after appox 15 minutes) and the provisioning operation will fail. Workaround
- Enter at least one routing constraint for backup path routing as part of a protected L0 provisioning
operation.
• When provisioning CMD to CMD service, the user must select CMD ports from either Rx to Tx or Tx to
Rx.
Blue Planet MCP Release 18.06 Release Notes (new

items)
The following table lists new issues in Blue Planet MCP Release 18.06 and wherever possible, provides
workarounds for them.
Table 2. Blue Planet MCP 18.06 new issues and limitations
ISSUE / DEFECT NUMBER PROBLEM DESCRIPTION WORKAROUND
BPPF-6308 Active Alarm search returning None.

bogus results when using a "-"
sign at the beginning of a filter
string.
BPPF-6590 Login failed. Error: "503 Service To identify the thread that holds
Unavailable, No server is locks, the following could be
available to handle this request." done:
Check the 'innodb' status via

'SHOW ENGINE INNODB
STATUS' and identify the thread
that holds lock (threads that runs
longer than the
'innodb_lock_wait_timeout',
which is 50 secs by default).
'SHOW PROCESSLIST;' to find a

thread ID and 'kill <id>' to kill the
thread when the same problem
happens again.
(Reference:
https://stackoverflow.com/
questions/6000336/how-to-
debug-lock-wait-timeout-
exceeded-on-mysql/20521293#
20521293)
BPSO-88867 Deployed SNCP protect leg Select transport client from UI,
delete/create from the network and apply Forget operation on
show extra SNC in mcp-ui fre the provisioned SNCP. Then
browser promote the SNCP connection.
BPSO-89812 Commissioning: Invalid None.

provisioning (for OSPF, ILAN,
IISIS) in a new shelf scripts
planned on top of a discovered
node where node is not planned
/ commissioned via MCP
BPSO-90626 Under Tunnel Infrastructure page Check alarms when OTU links
for Broadband cards NDP states are failed to determine if the
on the link is showing down due fault is local or remote (OTU vs
to ODU-AIS present on odu layer ODU layer faults).
BPSO-92878 Online Planning: When deleting

the undeployed service,
loopback on the CMD port not
getting removed
BPSO-92900 Service Kafka Topic warning None.

state in nagios with status
information "configuration of
topic does not align with the
topic on the Kafka server, using
server version"
BPSO-93183 A partitioned user cannot see the

manually created NE
BPSO-93869 SNMP v3- Wrong SNMP PDU None.

digest and unsupported security
level errors when enrolling 2
devices with different security
profiles
BPSO-94088 Correlated alarms shows "0" in None.

main UI Alarm window while
details show the correct number
of services
BPSO-94189 54xx: SNCP connection deleted None.

from NM, stuck at UI shows
scattered connection with no
scheduled state.
BPSO-94397 Not able to calculate route for During provisioning, select the
100G OTR bookended over L0 correct ports (that is, the NDP
photonics links that are not yet
provisioned).
BPSO-94422 Online Planning: Not Getting None.

Routes for 100G Line rate with
MOTR/FOTR card NTK538DR/FR
BPSO-94481 Unable to commit network with None.

CDLCC configuration
BPSO-94872 Line OPS: No path presented on Bring up the "DOWN" SNC can
the tree structure for a newly workaround issue.
enrolled OPS config with one
SNE down
BPSO-95020 NE backup fail since MCP uses Perform the following steps:
the internal lan ip address, when
storage method is “database” for
backup_restore. 1. From the BP MCP UI, go to
the Swagger UI by selecting
System > APIs.
2. From Network element
configuration retrieve profiles
by selecting GET
{{MCP_SERVER}}/configmg
mt/api/v2/profiles.
A sample response follows.
Sample response
{
"id": "600f32fe-
1669-4b32-8da3-
290a066b53c7",
"type": "NE
maintenance profile
details",
"attributes": {
"name":
"bckup_3",
"profileType":
"backup_restore",
"protocolType":
"sftp",
"storageMethod":
"database",
"userName":
"bpuser",
"userPassword":
"zZqo0Of6PXETNcpLKLlj7A
==",
"ipAddress":
"10.186.1.130",
"port": 22,
"imageLocation":
"ciena.backups",
"sshPort":
"22",
"numberOfBackupFiles":
"3"
}
}
BPSO-95020 (continued) NE backup fail since MCP uses 3. Using the id and attributes
the internal lan ip address, when
storage method is “database” for from the response, issue a
backup_restore. (continued) PATCH request to update the
profile information, that is, in
this case to change the IP
address.
PATCH
{{MCP_SERVER}}/configmg
mt/api/v2/profiles/{profileId}
◦ Specify all the attributes

with the new ipAddress.
4. Enter the correct
userPassword in text.
BPSO-95021 Property mismatch observerd on None.

the services after post upgrade
activity.
BPSO-95247 L0 Provisioning: Deployed state

MRSNC- Resilience shown as
Unprotected instead Protected
(MR-SNC)
BPSO-95451 Service not unstitched when the None.

NEs that are part of a "Drop and
Continue" service are de-enrolled
BPSO-95538 EPL+VLLI Service provisioning It is the case of dynamic PW

over Dynamic Co-routed tunnel being provisioned where in/out
stuck into deploying state labels are computed and
allocated by the NE control
plane. In this case, the discovery
is being triggered before the NE
has done the allocation of the
labels, hence the error.
Manual re-sync of the node fixes

the issues as by that time NE CP
has allocated the labels.
BPSO-95596 Client side circuit pack alarms None.

are not getting correlated
BPSO-95738 Online Planning: Network

Mismatched Detected with state
as deployed for Photonic SNC
after card insertion prior the
provided future deployment time.
BPSO-95890 Line Port/PTP shows wrong None.

count of Related services on
Alarm page
BPSO-95980 Number of Transport services

does not match in Active and
Standby
BPSO-96045 L0 Service Provisioning over Do not "deploy now" for a plan-

Planned: Deletion of Deploying over-plan service. To clean up
state PSNC has Failed from MCP the "undeploy failed" service,
UI - Thrown an error as Failed "forget" the service.
undeployment for
ServiceIntentIDxxx due to string
indices must be integers
BPSO-96168 Issue with checking 6500 RA NE Restart ractrl

session balance during post-host
failover
BPSO-96275 L0 Service Provisioning over Make sure the project

Planned[PSNC]: BPO-IFD is not completion date is later than that
time aware during service of the service turn up time.
provisioning on Planned
NE/Equipment
BPSO-96528 6500-L1: ETH10G SNC over

100GMUX/OCLD did not get
stritched when specific
operations performed.
BPSO-96532 Not able to view complete Resync the NE from MCP.

stiched service in topology for
2x250 (56-250) mated line
service, only visible after WS Ai
NE Resync.
BPSO-96591 Attempt to add back a removed Once the Drop and Continue
UNI to Drop and Continue service service is in misMatch state,
will block adding any endpoint. MCP cannot add new endpoint
to the service any more.
BPSO-96640 L0 Provisioning [MRSNC]: If calculateRoute timeout, add

Provisioning Failed-timed out [12 more constraints in the
node MESH setup] provisioning form to return the
reduced paths. As per the
originator confirmed: - Tried to
create MRSNC between A to B
with constraints - Calculate route
succeeded and it took close to
17 min.
BPSO-96781 Identify which 10GE Client 1. Delete first 10GE service

service should own ODU4s
Cross-Connect (MUX-OCLD) created last to avoid the
during Undeploy issue when deleting other
10GE services on same MUX
card. For example: The
following services are
created in this order: S1
(deployed), S2 (deployed).
The order of deletion should
be S2 (first), S1 (second).
2. If first 10GE service is not
deleted last, user will have to
wait 15 minutes to elapse the
timeout and service will
transition to DEACTIVATED.
BPSO-96822 FOTR (NTK538FR) Line - Line

Deployed Service (OTSi and
SNC) not getting deleted from
MCP
BPSO-96824 Delete loopback interface is Log into CLI prompt the

blocked in UI by isis enabled but following:
loopback edit not allowed to
disable isis # Detach ISIS instance from all
other ip interfaces.
# Delete ISIS instance from NE.
# Delete loopback interface.
BPSO-96841 L0 Provisioning [Client Service During client provisioning, the

100G OCI-100G OCLD]: Calculate MUX equipment does not show
route did not show complete up in calculateRoute for
details of connectivity 10G/OC192/SMT64 rates but the
pluggable the rate is applied
shows up.
The entry is the OCLD line port to

indicate the pluggable is next
lined to line port. This should be
sufficient enough to indicate the
MUX equipment is involved in
the path for Client service.
BPSO-96855 Validation of NE Alarm

verification fails for Waveserver
WL3 from MCP with error
"ESOCKETTIMEDOUT"
BPSO-96869 MEP creation for the leaf failed None.

for the ETree service configured
with CVID bundle.
BPSO-96874 6500-L1: get commitRoute

failing on ODU2e service
provisioning over Telstra config
12
BPSO-96931 L1 OSRP link is not showing up

under routes filtered out when
calculate route is clicked
BPSO-96956 18.06.00-359: Both 5K L2 and 2K Perform a consecutive mcp

L0: half the network not synced restart and manually reconnect
after either an MCP restart (PM from MS and manually resync
collection DISABLED) - from NC for all not connected or
intermittent non synced NEs.
BPSO-97047 Not able to move cards to other The issue is that the "Edit
shelf for the planned degree on Configuration" feature is
commissioned network. erroneously blocking the edit of
Shelf ID, if any degrees in the
existing shelf are already
deployed.
In order to work around the

issue, go to the Domains grid,
and temporarily toggle the
"Planning Status" from
"Deployed" to "Planned" for all
domains that include equipment
at the site where equipment is to
be moved. This should enable
editing of shelf id in the Edit
Configuration grid. Once shelf id
has been edited as desired,
return to the Domains grid and
revert the "Planning Status" to
the original status for all
domains.
Liquid Spectrum 1.2 Release Notes (new items)

The following table lists new issues in Blue Planet MCP Release 18.06 related to Liquid Spectrum and
wherever possible, provides workarounds for them.
Table 3. Liquid Spectrum 1.2 release notes (new items)
BPSO-90200 BWO - Of one or more of the bulk Check Site Manager to ensure
services to deploy the total services were created
capacity fails deployment, it will successfully.
not be reflected in MCP UI.
BPSO-92157 BWO LQS - Cannot create service Use WLAi 200G transmission
using 16QAM modulation mode instead of WL3 16QAM.
equipment
BPSO-93983 LQS BWO: Not considering None.

Waveservers (modems managed
under different NCID than the
photonic NC/NE)
BPSO-95168 BWO: Expansion of an existing Provision capacities on new

SNCG does not work in 18.06 SNCG.
BPSO-95172 BWO: 3. Allow more than 16x Ensure higher transmission

services to be allocated for a capacity modems such WLAi are
given capacity request available to be used for capacity
provisioning.
If you still exceed 16 services,

then limit your bandwidth
allocation requests to that which
can be serviced by maximum 16
services (e.g. for 400Gbps
services, maximum 6.4Tbps). If
more is needed, perform multiple
requests.
BPSO-95173 BWO: User not allowed to select The labels of the services are
specific labels for individual made up of the string label
services selected for a given assigned to the overall
capacity provisioning, where bandwidth request, and are
individual services default come appended with ""-1"", ""-2"", etc.,
with a suffix of "-1", "-2", …, "-n" and these cannot be changed.
appended with user-defined
capacity label. If different labels are really
required, then the services
should be defined one at a time.
BPSO-95177 BWO: No Tx port number None.

modifications are allowed under
service details for any route
options before deployment. Tx
ports are default selected based
on availability for a given route
option.
BPSO-96905 LQS-BWO - 100g service over To create 100g service for

WLAi (v1) fails as NE does
support 100G transmode Bandwidth Optimizer, do the
following:
1. Retrieve the IfdConfig

Resource Id from Bpocore
market:
GET <MCP SERVER

IP>/bpocore/market/api/v1/r
esources
2. Search for the resource with

the following label "Resource
for
ifd.v5.resourceTypes.IfdConfi
g", and take note of the
related "id".
3. Issue a PATCH API call by
setting the
bwoSDRSelectOducnLayerRa
te flag to false, and using the
IfdConfig Id (which you took
note of):
PATCH <MCP
SERVERIP>/bpocore/market/
api/v1/resources/<IfdConfig
Resource Id>
Sample body
{
"properties":
{
"configurationProper
ties": {
"ifd.l0.bwoSDRSelect
OducnLayerRate": {
"value": "false"
}
}
}
}
N/A If the requested capacity cannot

be fit within a contiguous
spectrum, then the call will be
rejected
N/A No capacity provisioning options

under MR-SNC
N/A Only existing modems (Tx/Rx)

are taken into account for
capacity provisioning. No
support for future WLAi planning.
N/A No Regen support
N/A Sparsely connected DIA is not

supported
N/A No Bulk spectrum assignment or

optimization.
Blue Planet MCP Release 18.06 Release Notes (release

note items from previous releases)
The following table includes the Blue Planet MCP 18.06 release note items from previous releases.
Table 4. Blue Planet MCP 18.06 release note items from previous releases
ISSUE/ DEFECT NUMBER PROBLEM DESCRIPTION WORKAROUND
Platform
BPPF-5361 Regression Restore: one of three Since the failure occurs

cassandra instances fails on intermittently, the recommended
restore workaround is to retry the
restore operation.
BPPF-5423 Geo Redundancy Configuration Manually start the bpfirewalld on

— Error while notifying Active
Site about its remote peer using all hosts on both GR sites, that
BPI is, on all hosts enter the
following, as bpadmin:
sudo systemctl start

bpfirewalld
BPPF-5472 Cassandra failing to start due to This can be detected by looking

a corrupted commit log file
into the cassandra logs for the
following:
org.apache.cassandra.utils.JVM
StabilityInspector: Exiting due to
error while processing commit
log during initialization.
Assuming only a single instance

encountered this issue, correct
the issue by performing the
following steps:
1. Stop the container docker

stop <container id>
that was experiencing the
error.
2. Remove the
/opt/ciena/bp2/data/commit
log directory for the stopped
container.
3. Start the container back up
docker start
<container id>.
The restarted container will

automatically rejoin the ring and
repair from the other nodes.
BPSO-75738 The 11.16 load is not being None.

picked up in BP MCP correctly. It
is showing 11.1.6.
Layer 0
BPSO-59734 L0 Sanity: MR-SNC fails to delete When deleting a P-SNC or MR-

- DTL delete fails with "400 Client SNC, ensure that the deletion of
Error: Bad Request". the DTLSet has been fully
flushed through the system
before creating a new P-SNC or
MR-SNC that would create the
same DTLSET name.
BPSO-67156 Reusing SNCG with an active

protect path does not retain
home & restore path
designations.
BPSO-67831 MCP fails to truncate userLabel

when provisioning to the NE.
BPSO-68694 L0: Planned Infrastructure

service (existing equip + future
date) displays wrong Freq in the
services list.
BPSO-68979 Routes not coming when

calculating with ROADM
line(bidirectional) constraint ,
getting error "Failed to find
path(s): No path or not enough
resources between TPEs".
BPSO-76873 Post De-enrolled of NEs, Still few Do not de-enroll NEs that have
connections hung under the services planned over top of
transport Services & transport them without also deleting the
Infrastructure. planned service.
BPSO-78925 Not able to delete a ETH 10G Use packet mapping >10.7G.
discovered client service from
MCP. If this is not an option, then there
is no workaround.
BPSO-79652 Plan OCLD-MUX on large De-enroll and re-enroll.

ROADM, mux card provisioning
took 3+hrs to complete after the
card insertion
BPSO-80837 5430 R4.3 NE Enrollment Failed: Manually retry the NE enrollment

"'NoneType' object has no after reducing the number of
attribute 'stop'" error observed in active user sessions on the NE.
Enrollment window. Workaround:
Manually retry the NE enrollment
after reducing the number of
active user sessions on the NE.
BPSO-80854 Implementation error of the None.

"memeber name" attribute while
planning WSAi node from MCP
and 1-P.
BPSO-81561 MCP L0 channel add procedures None.

for fixed grid systems differ if
channel include passthru
ROADM node or not
Layer 1
BPSO-75441 MCP-UI Flexibility required in During SNC provisioning via

"Constraint based routing" while NE/Link Inclusion/Exclusion
provisioning the SNC. constraints the user should
provide the NE and the OSRP
Links in order (that is, the SNC
desired path). The workaround is
to provide the input in sequence.
Layer 2
BPSO-20556 Should not be able to After installing the planned

deploy/undeploy services in IFD equipment, follow the procedure
if underlying equipment is in to take the equipment out of
maintenance mode. maintenance mode before
deploying any services.
If services were deployed, follow

procedure to take equipment out
of maintenance mode before
undeploying any infrastructure
services. (See the procedure
"Setting the maintenance mode"
in the Blue Planet MCP User
Guide, 450-3709-301.)
BPSO-40686 Equipment project deleted even

with service provisioning
present.
BPSO-55311 New CVID edited bundle does The CVIDs or SVIDs are currently
not display under service not shown in the service
attributes. attributes for planned/scheduled
packet services. To view the
CVID list, click the Edit button for
the service, and review the CVID
list shown. After editting the
CVID list, you can confirm the
settings took place by re-opening
the Edit dialog after the edit
operation has completed in 1 to
4 minutes.
BPSO-55415 UI showing service A - Z with

protected MPLS is confusing.
BPSO-55692 LSP buttons remain active on the NA

UI even after tunnel is selected
to be deleted.
BPSO-56713 Bulk switching takes around 3

minutes when number of
protected tunnels are around 40.
BPSO-56951 YETI-IFD: Some FREs are created

after IFD reports project commit
success.
BPSO-57451 17.06.02:PST:1000 L0: MCP Re-start and the initiate the

Online backup fails/aborted with backup again. This will help
1000 L0 NEs managed. resolve the server not
responding issue.
BPSO-57991 HTML dump seen when no path

found between NEs.
BPSO-58767 You cannot retrieve the None. The resolution will be to

equipment summary via CLLI provide a new API, the
before committing the project. implementation and the timing is
This query is supported if the under investigation.
project is committed or
deployed.
BPSO-59599 Service details view - info cards

with fields not applicable to
Waveserver.
BPSO-59734 When the IFD logic to delete the

service is triggered, IFD will
delete the DLTSET with the
deletion of the SNCG. The test
should either ensure that all the
related resources are cleared in
MCP before declaring the P-SNC
undeploy test a success, or there
needs to be a longer time delay
between the two tests.
BPSO-63640 Ports numbering is not proper.

User may not be able to create
services due to port ambiguity
(5150 only).
BPSO-67750 Unable to visualize/provision

tunnels or services over the intra-
link (between shelves of the
same 6500 PF TIDc).
BPSO-69703 git clone fails during onboarding

of ssh key.
BPSO-76862 A and Z end of service swap in None.

details and Edit section.
BPSO-77158 5170 upgrade does not happen The user can delete the pre-
with the pre-existing build existing build available on NE
available on NE[by custom and then attempt
means, that is, not through MCP Download/Upgrade from MCP
Conf Mgmt GUI/RestAPI] GUI/REST.
BPSO-82146 Lab Trial Prep: Attempt to delete This service has a layerRate of
'discovered' 10GE client fails ETHERNET and its deletion is not
without reason in MCP 18.02 supported in 18.02.
(336)
For now delete the facility using
SiteManager
BPSO-82563 Tunnels got stuck in Discovered Use REST API without sending
state in MCP post Restore was the AIS update to edit the tunnel
done on the 5170, 3928 and that has 5170 as the end node.
3926 nodes.
If this condition is encountered,
the user can use the disovery
PATCH API to 'reconnect' the
session and the NC will come
back into the list as it is resync’d.
BPSO-86256 LSP correction following node

insertion is failing
Blue Planet MCP Release Notes, Release 18.06 FOSS disclosure document
FOSS disclosure document

The Free and Open Source Software (FOSS) packages embedded within Blue Planet Manage, Control and
Plan (MCP) Release 18.06 are identified in this section.
The table below lists the FOSS in alphabetical order.
Table 5. FOSS embedded in Blue Planet MCP 18.06
THIRD-PARTY FOSS VERSION USED IN BLUE PLANET MCP 18.02
Apache Cassandra 2.1.9
Apache Commons-Lang 2.6
Apache Spark 1.5.1
AspectJ 1.8.4
Atmosphere 2.2.4
Atmosphere Client 2.2.5
Cassandra Driver 2.1.7
D3.JS 3.4.13
DOM4J 1.6.1
DropWizard 0.7.1
Ember Table 0.2.4
Ember.js 1.8.1
Google GSON 2.3
Google Guava 17.0
Inuit CSS 5.0.1
Jackson 2.3.2
JDOM 1.1
Jeha 1.0.2
Jersey 3.1.1
Jetty 9.0.7.v20131107
LogBack 1.1.3
Moment.JS 2.8.3
SBT 0.13.7
Scala 2.10.4
slf4j 1.7.7
Blue Planet MCP Release Notes, Release 18.06 FOSS disclosure document
THIRD-PARTY FOSS VERSION USED IN BLUE PLANET MCP 18.02
spark-jobserver master (Nov 3rd 2015)
Spring Framework 2.5.6
Swagger 1.3.0
swagger-core_2.10
Swagger 1.3.0
swagger-annotations_2.10
Swagger 1.3.0
swagger-jaxrs_2.10
Swagger 1.3.0
swagger-ui 2.0.24

(Blue Planet MCP R18.06 Release Notes) 08.01 PDF

Uploaded by

Copyright:

Available Formats

(Blue Planet MCP R18.06 Release Notes) 08.01 PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

(Blue Planet MCP R18.06 Release Notes) 08.01 PDF

Uploaded by

Copyright:

Available Formats

Blue Planet MCP Release Notes

Release 18.06 Standard Issue 08.01, September 2018

Ciena software license . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

About this document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Blue Planet MCP Release 18.06 Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Network Element Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Software Upgrade Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

OnePlanner Release Alignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Platform Improvements Added in MCP 18.06 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Release Notes for Blue Planet MCP Release 18.06. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

MCP Export . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Running FTV/ALE on MCP Exported networks in OnePlanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

MCP Import and Commit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Service Discovery & Visualization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Blue Planet MCP Release 18.06 Release Notes (new items) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Liquid Spectrum 1.2 Release Notes (new items) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

FOSS disclosure document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Copyright © 2016-2018 Ciena® Corporation. All Rights Reserved

Table 1. Contacting Ciena

CORPORATE HEADQUARTERS 410-694-5700 OR 800-921-1144 WWW.CIENA.COM

Customer Technical Support/Warranty

in North America 1-800-CIENA24 (243-6224)

in Europe, Middle East, and 800-CIENA-24-7 (800-2436-

00 0800 77 454 (Slovenia)

CORPORATE HEADQUARTERS 410-694-5700 OR 800-921-1144 WWW.CIENA.COM

in Asia-Pacific 800-CIENA-24-7 (800-2436-

120 11104 (Vietnam)

000 8004401369 (India)

in Caribbean and Latin America 800-CIENA-24-7 (800-2436-

009 800-2436-2247 (Colombia)

0800-77-454 (Mexico and Peru)

Sales and General Information North America: 1-800-207-3714 E-mail: [email protected]

in North America 410-694-5700 or 800-207-3714 E-mail: [email protected]

in Europe +44-207-012-5500 (UK) E-mail: [email protected]

in Asia +81-3-3248-4680 (Japan) E-mail: [email protected]

in India +91-22-42419600 E-mail: [email protected]

in Latin America 011-5255-1719-0220 (Mexico E-mail: [email protected]

Training E-mail: [email protected]

Ciena software license

survive the termination of this License.

About this document

The information contained in this document is primarily intended for:

To download a document, perform the following steps:

1. As a registered user with a my.ciena.com account, log into https://my.ciena.com.

Blue Planet MCP Release 18.06 Summary

Platform Features • MCP High Availability & scalability (2+1)

API • NBI and Southbound separate physical/virtual

Layer 2 Infrastructure and Services • MPLS-TP static tunnel management

• CD (CCMD12 – SMD – MLA/XLA – 1x9 WSS)

• Colored ROADM Thin Terminal (discovery/

Layer 0 Infrastructure and Service Features • Waveserver configurations

Layer 0 Infrastructure and Service Features • Clients / Transponders

• Performance Meter application:

Software Upgrade Support

OnePlanner Release Alignment

Platform Improvements Added in MCP

Troubleshoot System Troubleshooting

• Audit log dashboard

Stitch Reliable Network Stitching