Estimated Boq For Furniture Work PDF

Download as pdf or txt
Download as pdf or txt
You are on page 1of 5

ESTIMATED BILLS OF QUANTITIES FOR PROPOSED INTERIOR FURNISHING WORK (LOOSE & FIXED

FURNITURE) OF STATE BANK OF INDIA FOR PROP. RBO - 2, AT 2ND FLOOR, ADMIN. OFFICE ,
AMBAWADI, AHMEDABAD

ESTIMATED BILL OF QUANTITIES

Sr. No. Description Quantity Unit Rate Amount

Note : Rate should be inclusive of material,labour,tools, machinery, scaffolding, final disposal of debris,
cleaning cutting wastage etc. All taxes, transportation etc. complete. (Excluding GST) GST will
be paid as Applicable at the time of payment of Bills

[A] FURNISHING WORK

SIDE CREDENZA (SIDE TABLE)


7 Side Credenza Size 3'-3"x1'-4" x 2'-6"/3'-0" ht.
Openable shutter with 3.50 mm thick Teak veneer
with PU Coating finish on Top , front, sides,
shutter and 35 mmx6 mm thick Burma Teak
beading on Top Edges with PU Coating. Veneer
to be provided only on visible surface etc
complete as follows. Only Front elevation will be
measured for payment purpose. ( For BM) Rate for
length Less then 3'-3" length
0.0 SQ.MT 16,605.00 -
Supplying and installation side cabinet for keeping
computer and printer of size 1'-4" width 2'-6" height
and 3'-6" length having openable shutters as
directed. Cabinet shall be made from 18 mm thick
commercial ply wood with 3.50 mm thick veneer with
PU Finish. Back shall be made from 6 mm thick
commercial plywood. Openable shutters shall be
made from 18 mm thick commercial ply wood with
veneer finished and approved make group lock,
handle, hinges, magnet catch. , Rate includes all
necessary provisions for installing computers. All the
internal surface, back side shall have 0.60 mm thick
balacing laminate
Exposed edges of Sides, Table Top shall be made 36
mm thick by providing additional 18 mm thick ply wood
patta of required width.
All the internal surface (non visible surface) shall be
provided with 0.60 mm thick balancing laminate
( FOR DETAILS REFER DRG. NO- 2 )

7[b] SIDE CREDENZA (SIDE TABLE) Same as above


Item No-7, but all external surfaces to be finished
with 1.0 mm thick Laminate (approved shades).
Size shall be 3'-0"/3'-3" x 1'-4" x 2'-6" ht. with
openable shutters as directed. 12.5 SQ.MT 10,250.00 128,125.00
FINISHING DETAILS IN NUTSHELL:
1) Top : Dark Laminate & Burma Teak beading on
Edges with pilishade
2) Front Appron & Sides: Frosty White Laminate

Architect: Vijay Sahijwani and Associates 1 Seal and Signature of Contractor


ESTIMATED BILL OF QUANTITIES

Sr. No. Description Quantity Unit Rate Amount

8[b] P/F LOW HEIGHT BOTH SIDE LAMINATE


PARTITION WITH CLEAR FLOAT GLASS 29 SQMT 3,485.00 101,065.00
Providing and fixing low height partition using 50mm
x25mm x 1.50mm thick Aluminium members
maximum in grid of 2'-0" x 2'-0" fixing 12 mm thick
MDF Board exterior grade / 6 mm thick ply of
approved brand on both side of aluminium framing
and fixing 1.0 mm thick laminate of approved shade
on both sides. Fixing 12mm thick free clear float glass
as directed. Applying lacquer polish on exposed
steam beach members / edges as directed. Laminate
to be provided only on visible surface Providing
pinup board of soft board covered with fabric and fixed
in partition as per design/instruction complete as
directed.

FULL HEIGHT PARTITION WORK

9 P/F BOTH SIDE LAMINATE SOLID/ PARTLY


GLAZED FULL HEIGHT PARTITION WITH DOOR 70 SQMT 3,382.50 236,775.00
Providing and fixing both sides laminate full height
partly glazed partition using 50mm x 25mm x
1.50mm thick Aluminium members in a maximum grid
of 2'-0" x 2'-0" fixing 12 mm thick MDF Board exterior
grade / 6 mm thick ply on both sides,1.0 mm laminate
of approved make shall be fixed on MDF / plywood.
Providing and fixing 5.0/8.0 mm thick float glass as
directed in the partition. Providing and fixing door
shutter using 32 mm thick flush shutter both side
laminated and fixing 6 mm thick glass with beading
patti, 5" Long 3 Nos stainless steel hinges, doorstop
shall be provided as directed. Godrej Mortice lock shall
be provided in door shutter. All visible members if not
laminated shall have lacquer polished as
directed.[REFER DRG NO-5]
For purpose of payment partition height up to
bottom of false ceilling only shall be measured and
paid . No extra payment shall be made for members
going up to slab/beam bottom.

Architect: Vijay Sahijwani and Associates 2 Seal and Signature of Contractor


ESTIMATED BILL OF QUANTITIES

Sr. No. Description Quantity Unit Rate Amount

FALSE CEILING WORK

13 P/F GYPSUM BOARD FALSE CEILLING 50 SMT 922.50 46,125.00


Providing and fixing Gypsum board 12.50 mm thick
false ceiling in steps and design using Original Indian
Gypsum board with original GI sheet section of
Gypsteel ULTRA ( Gypsteel Ultra shall be used)
supporting system in line and level. Finishing the
surface and applying 3 coats of Plastic emulsion
paint as directed complete. Entire work to be done as
per standard specifications of Saint Gobin Gyproc
India.
After completion of work, certificate from Saint
Gobain Gyproc Company shall be submitted
along with bill stating that work is satisfactorily
completed as per their specification.

Note : (1) Rate includes making necessary cut-outs


for lighting fixtures (2) Pattas if any shall be
measured in SqM and not in RMt and paid in SqM
(3) Only finished visible surface area shall be
measured for payment.

13[d] Providing and Fixing of Armstrong Mineral Fibre


Accoustical Suspended ceilling system with FINE
FISSURED (MICRO LOCK) EDGE TILES With
Armstrong Silhouette Exposed Grid 129 SMT 1,204.38 155,364.38
Using Silhouette Grid with Fine Fissured microlook
Edge Tiles. With necessary Angles at junctions as per
company specifications as directed complete. Rate
includes necessary cut outs for A/C Grills, diffusers
light fixtures complete as directed. Cutout for light
and Diffusers will be deducted from area. Only
Tiles cost will be deducted for payment purpose

After completion of work, certificate from Company to


be obtained and submitted with bill that work is
carried out as per their specifications

18 Providing and fixing "Dorma/Ozone/Godrej " or


equivalent make door closure. 3 NO 1,230.00 3,690.00

18[a] Providing and fixing "Dorma/Ozone/Godrej " or


equivalent make 100 Kg Floor Spring. 3 NO 4,100.00 4,000.00

19 Supplying and installation 3'-0" x 1'-9"x 1'-3"


height Center Tepoy as follows. 1 NO 4,612.50 4,612.50
Providing and making open box structure type Tepoy
made out of 36 mm (2X18) thick plywood with all over
1.0 mm thick laminate finish provided with bevelled &
diamond polished edges 12mm thick glass top
supported on 75 mm X 25 mm SS studs complete as
directed.

Architect: Vijay Sahijwani and Associates 3 Seal and Signature of Contractor


ESTIMATED BILL OF QUANTITIES

Sr. No. Description Quantity Unit Rate Amount

RECONDITIONING OF FURNITURE WORK

24 Providing and fixing 1.0 mm thick laminate on any


existing laminate surfaces of Tables, Side Tables, ,
cupboards, panelling by removing existing laminate
by Hot Iron. Rate includes applying lacquer polishing
on all existing exposed wooden members. Only
laminate finished surface area shall be measured for
payment 95 SMT 1,127.50 107,112.50

26 Removing, refixing and realignment of exisitng


Furnitures
Removing, Refixing and re-alignment of Tables,Side
Tables, cup board , Misc. other furnitures to be used
from existing premises including polishing and minor
repairs.
(i) Shiffting and re-laying table,side table, cup board as
per new lay out . Rate also incudes removal of
electric/ data/telephone connection as per site
requirements.
(ii) Necessary cuting, modification and repairing if
required.
(iii) Repaing of drawers and shutter and painting /polishing
complete as directed.

26[a] Table Size 6'-0" x 3'-0" For AGM. 1 NO 2,562.50 2,562.50

26[b] Table Size 5'-0" x 2'-6" For Officer. 2 NO 2,306.25 4,612.50

26[c] Table Size 4'-0"/4'-6" x 2'-6" For Officer 23 NO 2,050.00 47,150.00

26[d] Side Table Size 3'-3"/3'-0" x 1'-4"x 2'-6"ht 3 NO 1,230.00 3,690.00

26[f] Removing and refixing of existing storage cup board


with necessary cutting and modification including
painting/ polishing etc complete 12 SQMT 2,050.00 24,600.00

35 P/F VITRIFIED TILES FLOORING [600mmx600mm] 178 SMT 1,045.50 186,099.00


Providing & fixing 600 x 600 Vitrified tiles flooring of
approved make first quality and shade for flooring as
per design. Tiles shall be laid on existing flooring
and necessary adhesive of like NITOLITE -GP of
FOSROC make shall be used as directed. The rate
includes filling the joints of tiles using adhesive &
pigments, acid cleaning, cutting etc. complete. Rate
shall be same for all levels. Basic price of Tiles shall
be Rs. 400=00 per Sq. Mt (Excluding GST). etc. No
additional sand bedding charges shall be paid for
Electric trenches filling.

Providing and laying 3 mm thick bubble guard of Cello


make or equiv. for flooring protection and after
completion of other furniture work, removing the
same and carrying away as advised.
Only finished surface area shall be measured for
payment

Architect: Vijay Sahijwani and Associates 4 Seal and Signature of Contractor


ESTIMATED BILL OF QUANTITIES

Sr. No. Description Quantity Unit Rate Amount

35[a] P/F 75MM HEIGHT SKIRTING 18 RMT 123.00 2,214.00


Providing & laying 75 mm height skirting cut out of
vitrified tiles 600mmx600mm of approved make
over cement paste after making necessary cutting /
hacking in walls, surface preparation as directed
complete with joint filling etc. Rate also includes
filling of Zaries in skirting complete as directed.
The rates include removal of existing skirting &
its disposal. Basic price of Tiles shall be Rs.
400=00 per Sq. Mt excluding GST.

[A] TOTAL COST OF FURNISHING WORK 1,057,797.38

Note:
[a] In all furniture work, contractor shall make necessary
cutout in panelling/partitions / wooden members to
facilitate electrical/data cabelling and No extra
amount shall be paid for this
[b] All internal surface (non visible surfaces) shall be
provided with the 0.60 mm thick balacing laminate of
aproved make & shade in the all S.W
Counters/Tables/ Credenza,Storage Cup Board etc.

NOTE:-
(I) Rate includes dismentling existing furniture and
storing/ standing the same at a location as
directed by bank Nothing extra shall be paid for
then.

(II) Temporary shifting of Branch Furniture at


convinient location on Second floor as per the
instruction of Architect /Bank. Rate includes
creating/errecting counters, cash cabin
arrangement of furniture to the entire satisfaction
of Branch Manager complete as directed.by bank
Nothing extra shall be paid for then.

Architect: Vijay Sahijwani and Associates 5 Seal and Signature of Contractor

You might also like