Scribd Logo
Upload

Welcome to Scribd!

  • 120 views

    Trigear Brochure - 2121 PDF

    Uploaded by

    Deep Patel
    The Tri-Gear flowmeter uses rotating gears to accurately measure the volumetric flow of liquids. It offers high resolution, wide rangeability, and bidirectional flow capability. The document provides details on the operation, benefits, performance specifications, and construction of Tri-Gear flowmeters for various industrial applications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Trigear Brochure - 2121 PDF

    Uploaded by

    Deep Patel
    120 views5 pages
    The Tri-Gear flowmeter uses rotating gears to accurately measure the volumetric flow of liquids. It offers high resolution, wide rangeability, and bidirectional flow capability. The document provides details on the operation, benefits, performance specifications, and construction of Tri-Gear flowmeters for various industrial applications.

    Original Title

    Trigear brochure_2121.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The Tri-Gear flowmeter uses rotating gears to accurately measure the volumetric flow of liquids. It offers high resolution, wide rangeability, and bidirectional flow capability. The document provides details on the operation, benefits, performance specifications, and construction of Tri-Gear flowmeters for various industrial applications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    120 views5 pages

    Trigear Brochure - 2121 PDF

    Uploaded by

    Deep Patel
    The Tri-Gear flowmeter uses rotating gears to accurately measure the volumetric flow of liquids. It offers high resolution, wide rangeability, and bidirectional flow capability. The document provides details on the operation, benefits, performance specifications, and construction of Tri-Gear flowmeters for various industrial applications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    Introduction The Tri-Gear based flowmeter

    Tri-gear Flowmeters are precise, reliable outperforms its competitors when it


    and rugged instruments for the comes to the accurate metering of the
    volumetric flow of liquids in general majority of clean liquids including
    industrial, petroleum and chemical Solvents, Alcohols, Fuels, Oils, additives,
    applications that require high degrees of chemicals, food bases, paints and viscous
    accuracy and repeatability. They operate emulsions whether pumped or gravity
    on the Positive Displacement principle fed. Additionally it is an excellent, higher
    using advanced gear technology and offer accuracy replacement for transmitting
    a competitive alternative to their Oval variable area (Rotameter) flowmeters.
    Gear, Sliding Vane and Bi-Rotor
    alternatives.
    Benefits
    • High Resolution Digital Output
    Principal of operation • Wide Rangeability
    Liquid Passes into the single case • Bi-directional flow capability
    measuring chamber and displaces two Tri- • Digital or Analogue Outputs
    gears. Each rotation of a Tri-gear is available.
    proportional to a discrete unit of volume, • HART Output option.
    in turn, the speed at which the gears • Less slippage than oval gear
    rotate is directly proportional to flowrate. meters.
    Reed and Hall Effect sensors mounted • Smoother and quieter than Oval
    outside the pressure boundary detect the Gear Meters.
    movement of the Tri-gears, thus allowing • Dual Output standard (reed and
    local or remote instruments to display hall effect)
    flow total, rate of flow or facilitate • Low Mass Tri-gears facilitate fast
    batching applications. response time to step changes in
    flowrate.
    Meters can be fitted with additional
    sensors to provide in phase or out of
    phase signals for applications such as bi-
    directional flow.
    Performance and Specifications

    Model prefix: TG008 TG015 TG020 TG025 TG040 TG050


    small
    Capacity group: medium capacity
    capacity
    8mm 15mm 20mm 40mm
    Nominal size (inches) 25mm (1”) 50mm (2”)
    (3/8”) (1/2”) (3/4”) (1.5”)
    *Flow range – litres/min 0.25 ~ 9.2 2-50 2 ~ 50 5 ~ 150 10 ~ 250 20 ~ 500
    – US gal/min 0.07 ~ 2.4 0.3 ~ 10.5 0.6 ~ 13 1.3 ~ 40 2.6 ~ 66 5 ~ 132
    ± 1.0% of ± 0.25% of reading (15:1 turndown),
    **Accuracy @ 3cp
    reading ± 0.5% of reading (25:1 turndown)
    Repeatability typically ± 0.01% of reading
    -30°C ~ +150°C (-22°F ~ +300°F),
    Temperature range
    refer factory for lower & higher temperatures
    Maximum pressure (threaded meters) BarG
    Aluminium meters 30
    316 Stainless Steel meters 34 30
    High Pressure Meters 400 400 400 400 400 250
    Electrical – for pulse meters (see below for optional outputs)
    Output pulse resolution Pulses/litre (pulses/US gallon) – nominal
    600 77 77 33.5 11.5 6.5
    Reed Switch and Hall Effect
    (2546) (292.6) (292.6) (125.4) (43.7) (24.7)
    High Resolution Hall / 1340 154 154 67 23 13
    Quadrature (5092) (585.2) (585.2) (254.6) (87.4) (49.4)
    Reed Switch output 30Vdc x 200mA max. (maximum thermal shock 10°C (50°F)/minute)
    Hall Effect output (NPN) 3 wire open collector, 5 ~ 24Vdc max., 20mA max.
    4 ~ 20mA, scaled pulse, quadrature pulse, flow alarms or two stage batch
    Optional outputs
    control
    Physical
    Protection class IP66/67 (NEMA4X), integral ancillaries can be supplied Intrinsically Safe
    Noise generation @ maximum
    - 75db
    flow
    Dimensions refer data sheet
    Pressure drop chart refer data sheet
    75 microns
    Min. filtration – microns (mesh) 150 microns (100 mesh)
    (200 mesh)
    Approximate shipping weights (basic threaded meter) kg
    Stainless Steel 2.2 3.0 3.0 4.0 9.0 12.0
    Aluminium 1.0 1.5 1.5 2.0 4.0 6.0
    * Maximum flow is to be reduced as viscosity increases, see flow de-rating guide.
    Max. allowable pressure drop is 140Kpa (20psi).
    Stainless Steel Threaded Meter
    Aluminium Threaded Meters

    DIMENSION
    METER SIZE A B C D E F G H THREAD
    TG008 68 75 16.5 81.5 67.5 50 - M5 x 15 DEEP
    TG015 100 107 35 95.5 81.5 55 25 M5 x 10 DEEP
    TG025 115 124 45 102.5 88.5 70 30 M5 x 10 DEEP
    TG040 150 163 56 118.5 104.5 105 35 M8 x 13 DEEP
    TG050 180 202 87 121.5 107.5 120 50 M8 x 16 DEEP

    Flanged Meters
    Model Designation
    Size
    TG 008 3/8" (8mm ) aluminium or stainless steel
    TG 015 1/2" (15mm) aluminium or stainless steel
    TG 020 3/4" (20mm) aluminium or stainless steel
    TG 025 1" (25mm ) aluminium or stainless steel
    TG 040 1 1/2" (40mm) aluminium or stainless steel
    TG 050 2" (50mm ) aluminium or stainless steel
    Body material
    S 316L Stainless Steel
    A Aluminium
    H High Pressure TG008H-TG040H ~400 Bar, TG050H ~250 Bar
    Tri-gear material
    1 PPS (Ryton)
    2 PEEK (FDA Approved Material)
    6 Keishi cut PPS (Ryton) - for high viscosity liquids
    8 Keishi cut PEEK - for high viscosity liquids
    Bearing type
    1 PPS (Ryton)
    2 PEEK (FDA Approved Material)
    O-ring material
    1 Viton (standard )
    2 EPR - ( Ethylene Propylene Rubber)
    3 Teflon encapsulated viton
    4 Buna-N ( Nitrile) 100 °C (212 °F) max.
    Temperature limits
    1 80ºC (180° F) No Heat Insulation - maximum for meter mounted readout.
    2 120°C (250°F) - Use Heat Insulator (Option 5) if meter mounted readout.
    3 150°C (300°F).max. (Hall Effect output only).
    5 120°C (250°F) - Heat Insulator fitted for meter mounted readout
    Process connections
    1 BSP female threaded
    2 NPT female threaded
    4 ANSI-150 RF flanges
    5 ANSI-300 RF flanges
    6 PN16 DIN flanges
    9 Customer nominated
    Cable entries
    0 M16 x 1.5mm (exclusive to FRT Rate Totaliser)
    1 M20 x 1.5mm
    2 1/2" NPT
    Integral options
    00 Reed and Hall Effect output
    HR High Resolution Hall Effect output
    420 Analog output - 4 wire, 4 ~20mA output option
    ExH Explosion proof ~ Exd I/IIB T4/T6 (Hall Effect)
    ISH Intrinsically safe (I.S.) Hall Effect output
    RS Reed Switch only
    F1 FRT-00 Flow Rate Totaliser - No output - display only
    F2 FRT-AP Flow Rate Totaliser - 4-20mA output proportional to flowrate & scaled pulse output
    F3 FRT-ALP Flow Rate Totaliser - Alarm and/or scaled pulse output
    F4 FRT-BC Flow Rate Totaliser - 2 stage batch control

    DSTG – 2121

    Trigear Manufacturing,
    Distributed by:
    Unit 2, The Old Grain Store,
    Ditchling Common Industrial Estate,
    Ditchling, Sussex
    BN6 8SG
    United Kingdom
    Tel: 01444 248777
    Fax: 01444 243750
    Email: [email protected]

    You might also like