Scribd
Upload
95 views

Project Report Solid Works

Malik Muhammad Ibrahim and two classmates created a Solidworks assembly of a clamp. The clamp assembly contains 13 parts, including supports, a shaft, hinges, handles, pins, arms, and a grip. The group documented each individual part with dimensions provided in IPS units and assembled all parts in Solidworks to create the functional clamp model.

Uploaded by

Malik Muhammad Ibrahim
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
95 views

Project Report Solid Works

Malik Muhammad Ibrahim and two classmates created a Solidworks assembly of a clamp. The clamp assembly contains 13 parts, including supports, a shaft, hinges, handles, pins, arms, and a grip. The group documented each individual part with dimensions provided in IPS units and assembled all parts in Solidworks to create the functional clamp model.

Uploaded by

Malik Muhammad Ibrahim
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

Solid Modelling and Manufacturing Processes

Project Report

Name: Malik Muhammad Ibrahim


Roll No: 211192
Date of Submission: Dec 4th, 2022
Submitted to: Sir Hamza Shabbir Minhas
Group Members:

 Malik Muhammad Ibrahim (211192)


 Muhammad Ali Rafay (211222)
 Nusaiba Howraa (211249)
Task
Create an assembly using Solid-works.
The assembly we chose is:

The name of this assembly is Clamp.

Application:
This clamp is used to hold anything that has flat face between two things. Mostly,
carpenters and metal workers use this clamp. This helps them in holding the work piece on
their work table affectively whilst they work.
Parts:
The parts required for this assembly are:

Item No. Parts Quantity

1 Support (Left) 1
2 Support (Right) 1
3 Shaft 1
4 Shaft Hinge 1
5 Shaft Hinge B 1
6 Shaft Handle 1
7 Shaft handle Pin 2
8 Shaft Handle Pin Stopper 4
9 Arm 2
10 Grip 1
11 Pin A 1
12 Pin B 2
13 Pin C 1

The dimensions of each part are in IPS unit system.

1. Support (Left)
2. Support (Right)

3. Shaft
4. Shaft Hinge

5. Shaft Hinge B
6. Shaft Handle

7. Shaft handle Pin


8. Shaft Handle Pin Stopper

9. Arm
10.Grip

11.Pin A
12.Pin B

13.Pin C
Assembly

2D Drawing

You might also like