Scribd Logo
Upload

Welcome to Scribd!

  • 23 views

    sd500sdm Datasheet PDF

    Uploaded by

    josuna2006

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    sd500sdm Datasheet PDF

    Uploaded by

    josuna2006
    23 views2 pages

    Original Title

    sd500sdm datasheet.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    23 views2 pages

    sd500sdm Datasheet PDF

    Uploaded by

    josuna2006

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    INTELLIKNIGHT ACCESSORY

    Model SD500-SDM
    Two-Wire Smoke Module

    The IntelliKnight can handle new


    and retrofit installations with
    ease with the SD500-SDM

    The SD500-SDM allows you to assign an address to a loop of conventional detection devices. These
    devices can be dry contacts such as pull stations and heat detectors, or 2-wire smoke detectors. This
    means you can retrofit an existing building and utilize existing conventional devices. The SD500-SDM
    uses a 24VDC auxiliary power input to power the conventional loop, and is connected to the SLC loop
    via two wires. The conventional loop can be configured as Class A or Class B giving you the flexibility
    to handle any job.

    Feature
    • Converts a conventional two-wire
    loop to an SLC loop
    • Fully supervised
    • Compatible with Class B and
    Class A loops
    • Listed for use with all major two-
    wire detectors
    • UL Listed

    Specifications
    Operating Voltage:
    SLC: 32 VDC
    Aux Power: 24 VDC
    Aux Power Current:
    Standby: 20 mA
    Alarm: 106 mA
    SLC Current:
    Standby/Alarm: .55 mA
    Max. SLC Loop
    Resistance: 50W Model SD500-SDM
    Max. 2-Wire Conventional
    Smoke Loop Resistance: 50W
    Dimensions:
    Height: 4-7/8” (12.38 cm)
    Width: 4-7/8” (12.38 cm)
    Depth: 7/8” (2.22 cm)
    Operating Temperature: 32ºF to 120ºF
    (0ºC to 49ºC)
    Humidity: 10 to 85% RH
    Indoor Use Only
    INTELLIKNIGHT ACCESSORY

    Model SD500-SDM
    Two-Wire Smoke Module

    Engineering Specifications

    The contractor shall furnish and install where indicated on the plans, two-wire smoke
    modules, Silent Knight SD500-SDM. The modules shall be UL listed compatible with Silent
    Knight's Intelliknight 5820XL fire panel.

    Dimensions

    Model SD500-SDM Wiring


    Model SD500-SDM Detector Wiring

    This document is not intended to be used for installation purposes. We


    try to keep our product information up-to-date and accurate. We cannot MADE IN AMERICA
    cover all specific applications or anticipate all requirements. All FORM# 350314 Rev. C
    specifications are subject to change without notice. For more
    information, contact Silent Knight 12 Clintonville Road, Northford, CT © 2010 Honeywell International Inc.
    06472-1610 Phone: (800) 328-0103, Fax: (203) 484-7118.
    www.silentknight.com

    You might also like