Scribd
Upload
251 views2 pages

Huawei E353wu-1 Quick Start

This document provides instructions for setting up a mobile broadband dongle from Three. It describes the dongle's features such as the USB connector, indicator light, SIM/USIM and microSD card slots. It then explains how to insert the SIM/USIM card and optional microSD card and install the necessary drivers and dashboard software on a Windows PC to allow the dongle to be used. Users can then start the dashboard to access the mobile broadband connection and uninstall the software if needed.

Uploaded by

Chamika Mihiran
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
251 views2 pages

Huawei E353wu-1 Quick Start

This document provides instructions for setting up a mobile broadband dongle from Three. It describes the dongle's features such as the USB connector, indicator light, SIM/USIM and microSD card slots. It then explains how to insert the SIM/USIM card and optional microSD card and install the necessary drivers and dashboard software on a Windows PC to allow the dongle to be used. Users can then start the dashboard to access the mobile broadband connection and uninstall the software if needed.

Uploaded by

Chamika Mihiran
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Thank you for choosing Mobile Broadband from Three.

This Set-up guide shows you what your new dongle looks like, how to insert your SIM and get started.

Getting to know your dongle.


2

1 2

5 3 4

1. USB Connector
This connects the dongle to the USB port on a PC, Mac or laptop.

2. Strap Hole
You can tie the cap and the dongle together by threading a strap through the strap holes.

3. Indicator Light
This indicates current status of the dongle. Green, blinking twice every 3 seconds: The dongle is on and has power. Blue, blinking once every 3 seconds: The dongle is registering with a 3G/3G+ network. Blue, solid: The dongle is connected to a 3G network. Cyan, solid: The dongle is connected to a 3G+ network

4. MicroSD Card Slot


This holds a micro SD card. The micro SD card is a card that can be used for storing files and content.

5. SIM/USIM Card Slot


It holds a Subscriber Identity Module (SIM)/Universal Subscriber Identity Module (USIM) card.

Getting Your USB Stick Ready


Installing the SIM/USIM card
1. Slide the front cover to remove it from the dongle. 2. Insert the SIM/USIM card into the dongle as shown below. 3. Replace the front cover and slide it into place.

Installing the microSD card


1. Slide the front cover to remove it from the dongle.

2. Slide the card holder up to unlock it, and then lift it up gently.

3. Insert the micro SD card into the card slot. 4. Close the card holder and slide the holder down to lock it in place. 5. Replace the front cover and slide it into place.

Note:

Ensure that the cut edge of the SIM/USIM card is properly aligned with the SIM/USIM card slot and the micro SD card is inserted according to the direction as labeled on the micro SD card slot. Do not remove the micro SD or SIM/USIM card when the card is in use. Otherwise, the card as well as your dongle may get damaged and the data stored on the card may be corrupted or lost.

The micro SD card is an optional accessory. It is not provided in the package, but can be bought in 3Stores.

Installation/Removal Guide
The procedure for installing the dashboard depends on the operating system (OS) on your PC, Mac or laptop. The information below is based on a Windows XP operating system.

Connecting the dongle to a PC, Mac or laptop


Plug the dongle into the USB port of your PC, Mac or laptop.

Installing the dongle drivers and dashboard


1. Connect the dongle into the PC, Mac or laptop. 2. It will be automatically detected by your PC, Mac or laptop which will recognise the new hardware and start the installation wizard. 3. Follow the on-screen instructions of the installation wizard. 4. After the programs are installed, a shortcut for the dashboard will appear on your desktop. Note: There will be two installations. One will be the drivers for your dongle and one will be the dashboard. You should wait until both are installed before trying to use it.

Starting the dashboard


After installation the dashboard will start automatically. Then every time the dongle is connected to your PC, Mac or Laptop, the dashboard starts automatically.

Uninstalling the dashboard or drivers


1.Choose Start > Control Panel > Add or Remove Programs. 2.Find the dashboard or drivers and click Remove to uninstall.

Version: V100R001_01

Part Number: 31010FKL

You might also like