Scribd Logo
Upload

Welcome to Scribd!

  • 48 views

    Unipole Design

    Uploaded by

    Danial Johanes
    This document summarizes the analysis of a 4m high unipole structure in STAAD Pro. It includes 6 nodes and 5 elements. There are 7 primary load cases including dead, live, and wind loads. There are also 6 combination load cases that combine the primary loads. Section properties are provided for 2 pipe materials. 3D views of the unipole under load case 102 are shown.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Unipole Design

    Uploaded by

    Danial Johanes
    48 views18 pages
    This document summarizes the analysis of a 4m high unipole structure in STAAD Pro. It includes 6 nodes and 5 elements. There are 7 primary load cases including dead, live, and wind loads. There are also 6 combination load cases that combine the primary loads. Section properties are provided for 2 pipe materials. 3D views of the unipole under load case 102 are shown.

    Original Description:

    4m

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the analysis of a 4m high unipole structure in STAAD Pro. It includes 6 nodes and 5 elements. There are 7 primary load cases including dead, live, and wind loads. There are also 6 combination load cases that combine the primary loads. Section properties are provided for 2 pipe materials. 3D views of the unipole under load case 102 are shown.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    48 views18 pages

    Unipole Design

    Uploaded by

    Danial Johanes
    This document summarizes the analysis of a 4m high unipole structure in STAAD Pro. It includes 6 nodes and 5 elements. There are 7 primary load cases including dead, live, and wind loads. There are also 6 combination load cases that combine the primary loads. Section properties are provided for 2 pipe materials. 3D views of the unipole under load case 102 are shown.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 18

    Job No Sheet No Rev

    1
    Part
    Software licensed to
    Job Title Ref

    By Date1/30/2023 Chd

    Client File Unipole Design.std Date/Time 17-Mar-2023 12:06

    Job Information
    Engineer Checked Approved

    Name:
    Date: 1/30/2023

    Structure Type SPACE FRAME

    Number of Nodes 6 Highest Node 6


    Number of Elements 5 Highest Beam 5

    Number of Basic Load Cases 7


    Number of Combination Load Cases 6

    Included in this printout are data for:


    All The Whole Structure

    Included in this printout are results for load cases:


    Type L/C Name

    Primary 1 DL
    Primary 2 SDL
    Primary 3 LL
    Primary 4 WLX
    Primary 5 WLZ
    Primary 6 ELX
    Primary 7 ELZ
    Combination 101 SLS
    Combination 102 ULS
    Combination 103 WIND X ULS
    Combination 104 WIND Z ULS
    Combination 105 ELX
    Combination 106 ELZ

    Section Properties
    Prop Section Area Iyy Izz J Material
    (cm2) (cm4) (cm4) (cm4)
    1 PIP1144.0 13.900 211.000 211.000 422.131 STEEL
    2 PIP764.0 9.060 59.100 59.100 118.111 STEEL

    Print Time/Date: 17/03/2023 12:17 STAAD.Pro V8i (SELECTseries 5) 20.07.10.66 Print Run 1 of 18
    Job No Sheet No Rev
    2
    Part
    Software licensed to
    Job Title Ref

    By Date1/30/2023 Chd

    Client File Unipole Design.std Date/Time 17-Mar-2023 12:06

    Primary Load Cases


    Number Name Type

    1 DL Dead
    2 SDL Dead
    3 LL Live
    4 WLX Wind
    5 WLZ Wind
    6 ELX Seismic
    7 ELZ Seismic

    Combination Load Cases


    Comb. Combination L/C Name Primary Primary L/C Name Factor

    101 SLS 1 DL 1.00


    2 SDL 1.00
    3 LL 1.00
    102 ULS 1 DL 1.40
    2 SDL 1.40
    3 LL 1.60
    103 WIND X ULS 1 DL 1.20
    2 SDL 1.20
    3 LL 1.20
    4 WLX 1.20
    104 WIND Z ULS 1 DL 1.20
    2 SDL 1.20
    3 LL 1.20
    5 WLZ 1.20
    105 ELX 1 DL 1.20
    2 SDL 1.20
    3 LL 1.20
    6 ELX 1.20
    106 ELZ 1 DL 1.20
    2 SDL 1.20
    3 LL 1.20
    7 ELZ 1.20

    Print Time/Date: 17/03/2023 12:17 STAAD.Pro V8i (SELECTseries 5) 20.07.10.66 Print Run 2 of 18
    Job No Sheet No Rev
    3
    Part
    Software licensed to
    Job Title Ref

    By Date1/30/2023 Chd

    Client File Unipole Design.std Date/Time 17-Mar-2023 12:06

    Y
    X
    Z Load 102

    3D analysis of unipole in STAAD Pro.

    Print Time/Date: 17/03/2023 12:17 STAAD.Pro V8i (SELECTseries 5) 20.07.10.66 Print Run 3 of 18
    Job No Sheet No Rev
    4
    Part
    Software licensed to
    Job Title Ref

    By Date1/30/2023 Chd

    Client File Unipole Design.std Date/Time 17-Mar-2023 12:06

    3D structure view 4m high unipole.

    Print Time/Date: 17/03/2023 12:17 STAAD.Pro V8i (SELECTseries 5) 20.07.10.66 Print Run 4 of 18
    Job No Sheet No Rev
    5
    Part
    Software licensed to
    Job Title Ref

    By Date1/30/2023 Chd

    Client File Unipole Design.std Date/Time 17-Mar-2023 12:06

    -2.000 kN

    Y
    X
    Z Load 2

    Antenna loading.

    Print Time/Date: 17/03/2023 12:17 STAAD.Pro V8i (SELECTseries 5) 20.07.10.66 Print Run 5 of 18
    Job No Sheet No Rev
    6
    Part
    Software licensed to
    Job Title Ref

    By Date1/30/2023 Chd

    Client File Unipole Design.std Date/Time 17-Mar-2023 12:06

    -1.500 kN

    Y
    X
    Z Load 3

    Live load for maintenance.

    Print Time/Date: 17/03/2023 12:17 STAAD.Pro V8i (SELECTseries 5) 20.07.10.66 Print Run 6 of 18
    Job No Sheet No Rev
    7
    Part
    Software licensed to
    Job Title Ref

    By Date1/30/2023 Chd

    Client File Unipole Design.std Date/Time 17-Mar-2023 12:06

    -1.500 kN

    Y
    X
    Z Load 4

    Equivalent wind load x direction.

    Print Time/Date: 17/03/2023 12:17 STAAD.Pro V8i (SELECTseries 5) 20.07.10.66 Print Run 7 of 18
    Job No Sheet No Rev
    8
    Part
    Software licensed to
    Job Title Ref

    By Date1/30/2023 Chd

    Client File Unipole Design.std Date/Time 17-Mar-2023 12:06

    -1.500 kN

    Y
    X
    Z Load 5

    Equivalent wind load z direction.

    Print Time/Date: 17/03/2023 12:17 STAAD.Pro V8i (SELECTseries 5) 20.07.10.66 Print Run 8 of 18
    Job No Sheet No Rev
    9
    Part
    Software licensed to
    Job Title Ref

    By Date1/30/2023 Chd

    Client File Unipole Design.std Date/Time 17-Mar-2023 12:06

    -1.500 kN

    Y
    X
    Z Load 6

    Equivalent 0.12g seismic load x direction.

    Print Time/Date: 17/03/2023 12:17 STAAD.Pro V8i (SELECTseries 5) 20.07.10.66 Print Run 9 of 18
    Job No Sheet No Rev
    10
    Part
    Software licensed to
    Job Title Ref

    By Date1/30/2023 Chd

    Client File Unipole Design.std Date/Time 17-Mar-2023 12:06

    -1.500 kN

    Y
    X
    Z Load 7

    Equivalent 0.12g seismic load z direction.

    Print Time/Date: 17/03/2023 12:17 STAAD.Pro V8i (SELECTseries 5) 20.07.10.66 Print Run 10 of 18
    Job No Sheet No Rev
    11
    Part
    Software licensed to
    Job Title Ref

    By Date1/30/2023 Chd

    Client File Unipole Design.std Date/Time 17-Mar-2023 12:06

    Y
    X
    Z Load 102 : Displacement

    Whole Structure Displacements.

    Print Time/Date: 17/03/2023 12:17 STAAD.Pro V8i (SELECTseries 5) 20.07.10.66 Print Run 11 of 18
    Job No Sheet No Rev
    12
    Part
    Software licensed to
    Job Title Ref

    By Date1/30/2023 Chd

    Client File Unipole Design.std Date/Time 17-Mar-2023 12:06

    Y
    X
    Z Load 102 : Bending Z

    Whole Structure Mz.

    Print Time/Date: 17/03/2023 12:17 STAAD.Pro V8i (SELECTseries 5) 20.07.10.66 Print Run 12 of 18
    Job No Sheet No Rev
    13
    Part
    Software licensed to
    Job Title Ref

    By Date1/30/2023 Chd

    Client File Unipole Design.std Date/Time 17-Mar-2023 12:06

    Y
    X
    Z Load 102 : Shear Y

    Whole Structure Fy.

    Print Time/Date: 17/03/2023 12:17 STAAD.Pro V8i (SELECTseries 5) 20.07.10.66 Print Run 13 of 18
    Job No Sheet No Rev
    14
    Part
    Software licensed to
    Job Title Ref

    By Date1/30/2023 Chd

    Client File Unipole Design.std Date/Time 17-Mar-2023 12:06

    Y
    X
    Z Load 102 : Axial Force

    Whole Structure Fx.

    Print Time/Date: 17/03/2023 12:17 STAAD.Pro V8i (SELECTseries 5) 20.07.10.66 Print Run 14 of 18
    Job No Sheet No Rev
    15
    Part
    Software licensed to
    Job Title Ref

    By Date1/30/2023 Chd

    Client File Unipole Design.std Date/Time 17-Mar-2023 12:06

    0.271

    0.282

    0.228

    0.139
    0.122

    Y
    X
    Z Load 102

    Steel Utility Ratio < 1.0 (OK!)

    Print Time/Date: 17/03/2023 12:17 STAAD.Pro V8i (SELECTseries 5) 20.07.10.66 Print Run 15 of 18
    Job No Sheet No Rev
    16
    Part
    Software licensed to
    Job Title Ref

    By Date1/30/2023 Chd

    Client File Unipole Design.std Date/Time 17-Mar-2023 12:06

    X = -0.008 kN
    Y = 6.071 kN
    Z = 0.019 kN
    MX = FREE
    MY = FREE
    X = -0.022 kN
    X = 0.030 kN MZ = FREE
    Y = 0.156 kN
    Y = 0.156 kN
    Z = -0.020 kN
    Z = 0.001 kN
    MX = FREE
    MX = FREE
    MY = FREE
    MY = FREE
    MZ = FREE
    MZ = FREE
    Y
    X
    Z Load 102

    Reactions on the new structure (ULS).

    Print Time/Date: 17/03/2023 12:17 STAAD.Pro V8i (SELECTseries 5) 20.07.10.66 Print Run 16 of 18
    Job No Sheet No Rev
    17
    Part
    Software licensed to
    Job Title Ref

    By Date1/30/2023 Chd

    Client File Unipole Design.std Date/Time 17-Mar-2023 12:06

    Reactions
    Horizontal Vertical Horizontal Moment
    Node L/C FX FY FZ MX MY MZ
    (kN) (kN) (kN) (kNm) (kNm) (kNm)
    1 1:DL -0.005 0.623 0.013 0.000 0.000 0.000
    2:SDL -0.000 2.000 0.000 0.000 0.000 0.000
    3:LL -0.000 1.500 0.000 0.000 0.000 0.000
    4:WLX -1.274 -4.627 0.012 0.000 0.000 0.000
    5:WLZ 0.012 11.193 -1.298 0.000 0.000 0.000
    6:ELX -1.274 -4.627 0.012 0.000 0.000 0.000
    7:ELZ 0.012 11.193 -1.298 0.000 0.000 0.000
    101:SLS -0.006 4.122 0.014 0.000 0.000 0.000
    102:ULS -0.008 6.071 0.019 0.000 0.000 0.000
    103:WIND X ULS -1.536 -0.607 0.031 0.000 0.000 0.000
    104:WIND Z ULS 0.007 18.378 -1.541 0.000 0.000 0.000
    105:ELX -1.536 -0.607 0.031 0.000 0.000 0.000
    106:ELZ 0.007 18.378 -1.541 0.000 0.000 0.000
    5 1:DL 0.021 0.111 0.001 0.000 0.000 0.000
    2:SDL 0.000 0.000 -0.000 0.000 0.000 0.000
    3:LL 0.000 0.000 -0.000 0.000 0.000 0.000
    4:WLX 2.894 4.621 0.045 0.000 0.000 0.000
    5:WLZ -3.070 -4.630 -0.108 0.000 0.000 0.000
    6:ELX 2.894 4.621 0.045 0.000 0.000 0.000
    7:ELZ -3.070 -4.630 -0.108 0.000 0.000 0.000
    101:SLS 0.021 0.111 0.001 0.000 0.000 0.000
    102:ULS 0.030 0.156 0.001 0.000 0.000 0.000
    103:WIND X ULS 3.498 5.679 0.055 0.000 0.000 0.000
    104:WIND Z ULS -3.658 -5.422 -0.128 0.000 0.000 0.000
    105:ELX 3.498 5.679 0.055 0.000 0.000 0.000
    106:ELZ -3.658 -5.422 -0.128 0.000 0.000 0.000
    6 1:DL -0.016 0.111 -0.014 0.000 0.000 0.000
    2:SDL -0.000 0.000 -0.000 0.000 0.000 0.000
    3:LL -0.000 0.000 -0.000 0.000 0.000 0.000
    4:WLX -0.120 0.006 -0.057 0.000 0.000 0.000
    5:WLZ 3.058 -6.563 2.905 0.000 0.000 0.000
    6:ELX -0.120 0.006 -0.057 0.000 0.000 0.000
    7:ELZ 3.058 -6.563 2.905 0.000 0.000 0.000
    101:SLS -0.016 0.111 -0.014 0.000 0.000 0.000
    102:ULS -0.022 0.156 -0.020 0.000 0.000 0.000
    103:WIND X ULS -0.163 0.141 -0.085 0.000 0.000 0.000
    104:WIND Z ULS 3.651 -7.742 3.469 0.000 0.000 0.000
    105:ELX -0.163 0.141 -0.085 0.000 0.000 0.000
    106:ELZ 3.651 -7.742 3.469 0.000 0.000 0.000

    Print Time/Date: 17/03/2023 12:17 STAAD.Pro V8i (SELECTseries 5) 20.07.10.66 Print Run 17 of 18
    Job No Sheet No Rev
    18
    Part
    Software licensed to
    Job Title Ref

    By Date1/30/2023 Chd

    Client File Unipole Design.std Date/Time 17-Mar-2023 12:06

    Reaction Summary
    Horizontal Vertical Horizontal Moment
    Node L/C FX FY FZ MX MY MZ
    (kN) (kN) (kN) (kNm) (kNm) (kNm)
    Max FX 6 104:WIND Z ULS 3.651 -7.742 3.469 0.000 0.000 0.000
    Min FX 5 104:WIND Z ULS -3.658 -5.422 -0.128 0.000 0.000 0.000
    Max FY 1 104:WIND Z ULS 0.007 18.378 -1.541 0.000 0.000 0.000
    Min FY 6 104:WIND Z ULS 3.651 -7.742 3.469 0.000 0.000 0.000
    Max FZ 6 104:WIND Z ULS 3.651 -7.742 3.469 0.000 0.000 0.000
    Min FZ 1 104:WIND Z ULS 0.007 18.378 -1.541 0.000 0.000 0.000
    Max MX 1 1:DL -0.005 0.623 0.013 0.000 0.000 0.000
    Min MX 1 1:DL -0.005 0.623 0.013 0.000 0.000 0.000
    Max MY 1 1:DL -0.005 0.623 0.013 0.000 0.000 0.000
    Min MY 1 1:DL -0.005 0.623 0.013 0.000 0.000 0.000
    Max MZ 1 1:DL -0.005 0.623 0.013 0.000 0.000 0.000
    Min MZ 1 1:DL -0.005 0.623 0.013 0.000 0.000 0.000

    Utilization Ratio
    Beam Analysis Design Actual Allowable Ratio Clause L/C Ax Iz Iy Ix
    Property Property Ratio Ratio (Act./Allow.) (cm2) (cm4) (cm4) (cm4)
    1 PIP1144.0 PIP1144.0 0.228 1.000 0.228 ANNEX I.1 104 13.900 211.000 211.000 422.000
    2 PIP1144.0 PIP1144.0 0.271 1.000 0.271 ANNEX I.1 103 13.900 211.000 211.000 422.000
    3 PIP1144.0 PIP1144.0 0.282 1.000 0.282 BS-4.8.3.2 103 13.900 211.000 211.000 422.000
    4 PIP764.0 PIP764.0 0.122 1.000 0.122 ANNEX I.1 103 9.060 59.100 59.100 118.200
    5 PIP764.0 PIP764.0 0.139 1.000 0.139 BS-4.8.2.2 104 9.060 59.100 59.100 118.200

    Failed Members
    There is no data of this type.

    Print Time/Date: 17/03/2023 12:17 STAAD.Pro V8i (SELECTseries 5) 20.07.10.66 Print Run 18 of 18

    You might also like