GENERAL NOTES

1. All dimensions are in mm

2. structural drawings are to be read in
conjunction with the Architectural drawings
3. All dimensions to be checked and confirmed
with Architect's drawings. In case of
discrepancy, use architectural dimensions.
4. Unless otherwise specified, concrete shall be;
a) Floor slab = Grade 25 (1:1.5:3) mix
b) Floor beams = Grade 25 (1:1.5:3) mix
c) Columns and footings = Grade 30 (1:1:2)mix
d) Mass concrete = Grade 15 (1:3:6)mix
e) Strip foundation = Grade 25 (1:1.5:3) mix
f) Blinding concrete = Grade 10 (1:4:8) mix

5. Concrete cover to reinforcement shall be :

a) Floor slabs = 25 mm
b) Floor beams = 30 mm
c) Column footings = 50 mm sides and 75 mm
bottom
d) Columns = 40 mm
e) Strip foundation = 50 mm

6. Reinforcement shall comply to BS 4466 code of

practice.
a) Plain steel = 250N/mmsq.
b) High tensile steel = 460 N/mmsq.

7. Timber works shall comply to CP 112 and shall be

cell impregnated timber.
8. Starter bars for columns should not be cut prior
for approval by the structural Engineer.
T1 T1 T1 9. Minimum lap to bars to be 50xbar diameter or
T1 T1
360 T1 360 360 45xbar diameter.
450 T1 T1 450 450
water Tank T1 T1 water Tank T1 water Tank T1 T1
T1 T1
T1 capacity capacity capacity
1500 ltrs 1500 ltrs 1500 ltrs rev. date
T2 T2 T2
T1 T1 T1 T1 REVISIONS
+5.900 +5.900 T4 T4 +5.900
p.m
arch.
T2 Project team
water Tank water Tank water Tank s.e
capacity T5 T5 capacity T4 capacity T2 c.e
1500 ltrs 1500 ltrs T4 1500 ltrs
T3 e.e
m.e
q.s
T2
contractor
T2 T3 T2 others

T7
Project title
T3 T3 T3 T7 PROPOSED COMMERCIAL BUILDING TO
T5 T7
T10 T7 BE BUILTBON PLOT NO.........,BLOCK "....."
T11 T5 AT MBEYA MUNICIPALITY
T12 T5

T1 T3
T5
T7 T5
ARCHITECTS
T7 T6
T5 T8
T6
T1

T1
T9 T9 T1
T1
Structural Engineer
T1
T1 T1
T1 T1
T1

T7

ROOF TRUSS LAYOUT PLAN Client

GEOFREY MBWAGO
P.O.BOX ...................
DAR ES SALAAM
Job stage and description
STRUCTURAL DRAWINGS
Drawing Tittle :

ROOF TRUSS LAYOUT PLAN

Drawing no. Rev.

ST/RC/04
Designed by Eng.M.S.A
date: scale: Checked By:

FEB.2023 1:100 Eng.M.J.K

 GENERAL NOTES
1. All dimensions are in mm
2. structural drawings are to be read in
conjunction with the Architectural drawings
3. All dimensions to be checked and confirmed
with Architect's drawings. In case of
discrepancy, use architectural dimensions.
4. Unless otherwise specified, concrete shall be;
a) Floor slab = Grade 25 (1:1.5:3) mix
b) Floor beams = Grade 25 (1:1.5:3) mix
c) Columns and footings = Grade 30 (1:1:2)mix
d) Mass concrete = Grade 15 (1:3:6)mix
e) Strip foundation = Grade 25 (1:1.5:3) mix
f) Blinding concrete = Grade 10 (1:4:8) mix

5. Concrete cover to reinforcement shall be :

a) Floor slabs = 25 mm
b) Floor beams = 30 mm
c) Column footings = 50 mm sides and 75 mm
bottom
d) Columns = 40 mm
e) Strip foundation = 50 mm

6. Reinforcement shall comply to BS 4466 code of

practice.
a) Plain steel = 250N/mmsq.

A
b) High tensile steel = 460 N/mmsq.

7. Timber works shall comply to CP 112 and shall be

cell impregnated timber.
8. Starter bars for columns should not be cut prior
for approval by the structural Engineer.
9. Minimum lap to bars to be 50xbar diameter or
45xbar diameter.

rev. date

REVISIONS
TYPICALTRUSS ROOF TRUSS T3 p.m
arch.
Project team
s.e
c.e
e.e
m.e
q.s
contractor
others

Project title
PROPOSED COMMERCIAL BUILDING TO
BE BUILTBON PLOT NO.........,BLOCK "....."
AT MBEYA MUNICIPALITY

ARCHITECTS

Structural Engineer

Client
GEOFREY MBWAGO

DETAIL A P.O.BOX ...................

DAR ES SALAAM
Job stage and description
STRUCTURAL DRAWINGS
Drawing Title :
ROOF TRUSS DETAILS

Drawing no. Rev.

ST/RC/04
Designed by Eng.M.S.A
date: scale: Checked By:

FEB.2023 1:100 Eng.M.J.K