Byk-A 560

BYK-A 560
Data Sheet
Issue 10/2016
BYK-A 560
Silicone-free polymer-based air release additive for solvent-free unsaturated polyester systems,
gel coats and cast resins. It is recommended for all glass fiber reinforced, unsaturated polyester
applications. It is also recommended for pultrusion applications with acrylic, unsaturated
polyester and vinyl ester resins.
Product Data
Composition
Solution of foam-destroying polyacrylates and polymers, silicone-free
Typical Properties
The values indicated in this data sheet describe typical properties and do not constitute specification limits.
Density (20 °C): 0.87 g/ml

Refractive index (20 °C): 1,491
Flash point: 43 °C
Hazen color number: < 250
Turbidity: < 10 TE/F
Food Contact Legal Status

For the current food contact legal status, please contact our product safety department or visit www.byk.com
for further information.
Applications
Ambient Curing Systems
Special Features and Benefits

BYK-A 560 combines excellent deaerating performance with extremely good fiber wetting properties.
Air release additives may cause haze in the finished part in some resins.
Recommended Use
BYK-A 560 is recommended for all glass fiber reinforced, unsaturated polyester applications. BYK-A 560 also
displays excellent deaerating properties in some gel coats, specifically in systems in which the airless process is
used. BYK-A 560 is frequently used for glass fiber wetting in RTM and resin injection processes.
Recommended Levels
0.2-0.5 % additive (as supplied) based upon total formulation.
The above recommended levels can be used for orientation. Optimal levels are determined through a series of
laboratory tests.
Incorporation and Processing Instructions

Stir into the resin before adding other components.
BYK-A 560
Data Sheet
Issue 10/2016
Pultrusion
Special Features and Benefits

Prevention of air entrapment during the manufacture and application (pultrusion) of plastic systems and
to improve fiber wetting.
Recommended Use
Recommended for systems based on acrylates, unsaturated polyesters or vinyl ester resins.
Recommended Levels
0.3 phr additive (as supplied) in combination with 0.2 phr BYK-A 555 for air release. 0.5 phr additive
(as supplied) for fiber wetting.
The above recommended levels can be used for orientation. Optimal levels are determined through
a series of laboratory tests.
Incorporation and Processing Instructions

Stir into the resin before adding other components.
BYK-Chemie GmbH ACTAL®, ADD-MAX®, ADD-VANCE®, ADJUST®, ADVITROL®, ANTI-TERRA®, AQUACER®, AQUAMAT®, AQUATIX®, BENTOLITE®, BYK®, BYK®-DYNWET®,
P.O. Box 10 02 45 BYK®-SILCLEAN®, BYKANOL®, BYKETOL®, BYKJET®, BYKO2BLOCK®, BYKOPLAST®, BYKUMEN®, CARBOBYK®, CERACOL®, CERAFAK®, CERAFLOUR®,
46462 Wesel CERAMAT®, CERATIX®, CLAYTONE®, CLOISITE®, DISPERBYK®, DISPERPLAST®, FULACOLOR®, FULCAT®, GARAMITE®, GELWHITE®, HORDAMER®, LACTIMON®,
Germany LAPONITE®, MINERAL COLLOID®, MINERPOL®, NANOBYK®, OPTIBENT®, OPTIFLO®, OPTIGEL®, PAPERBYK®, PERMONT®, PRIEX®, PURE THIX®, RHEOCIN®,
Tel +49 281 670-0 RHEOTIX®, SCONA®, SILBYK®, TIXOGEL®, VISCOBYK® and Y 25® are registered trademarks of the BYK group.
Fax +49 281 65735
The information herein is based on our present knowledge and experience. The information merely describes the properties of our products but no guarantee
[email protected] of properties in the legal sense shall be implied. We recommend testing our products as to their suitability for your envisaged purpose prior to use. No warranties
www.byk.com of any kind, either express or implied, including warranties of merchantability or fitness for a particular purpose, are made regarding any products mentioned
herein and data or information set forth, or that such products, data or information may be used without infringing intellectual property rights of third parties.
We reserve the right to make any changes according to technological progress or further developments.
This issue replaces all previous versions – Printed in Germany

Byk-A 560

Uploaded by

Copyright:

Available Formats

Byk-A 560

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Byk-A 560

Uploaded by

Copyright:

Available Formats

BYK-A 560

Density (20 °C): 0.87 g/ml

Food Contact Legal Status

Ambient Curing Systems

Special Features and Benefits

Incorporation and Processing Instructions

Special Features and Benefits

Incorporation and Processing Instructions

This issue replaces all previous versions – Printed in Germany

You might also like