Aqua4Trans

4 Wire Dual Channel/Multiparameter Transmitter

Versatile Contoller for pH, Redox, Conductivity, Chlorine, Turbidity, TSS and DO

Energy Conservation | Environment | Process Efficiency www.forbesmarshall.com

 Features

Single, dual and multi parameter sensor input platform

Two analogue outputs per channel, configured as linear, or as a mathematical

function

Aqua4Trans Fully programmable, calculated measurements between channels, comparator,

etc.
4 Wire 6 relay contacts as optional, programmable between the channels, set as alarm,
Dual Channel/ error

Multiparameter Extendable architecture, add-on cards for digital communication (MODBUS)

Wash mode provided with wash timer

Transmitter Polycarbonate, IP66 enclosure, suitable for field/pipe, panel, wall as common
version

Backlit display with flexibility of multichannel viewing options

The Forbes Marshall Aqua4Trans, Applications

4 wire transmitter series is a versatile
High purity applications, pure and ultra pure water analysis
solution to measure various analytical
parameters with state-of-the-art online Water and wastewater effluents analysis
water and process monitoring.
Raw and municipal water treatment applications
The transmitter series offers single as
Rugged industrial environments
well as dual channel measurement for
pH, conductivity, ORP, TDS, chlorine, Pollution monitoring
turbidity, TSS and temperature with
flexible combinations and is suitable for Process analysis and control applications
field as well as panel mounting .
Steam production
The Aqua4Trans is feature-packed, Condensate return
covering the needs of almost every
industrial process under water Boiler blowdown
chemistry and makes this a new age
Cooling towers
solution for online monitoring.
Leak detection (heat exchangers)

Demineralisers

Reverse osmosis

Concentration (regenerations)

Waste streams

Desalination

Drinking water treatment

Industrial wastewater

Cooling water

Irrigation, river water

RO plants
Specifications
Display Backlit display dot matrix (128 x 64 dot matrix liquid crystal display)
Programmable for multichannel display of measured value, temperature, units and error
messages
Keypad Tactical 4 keys for menu, up/down scroll, enter, menu interface
Input Analogue Sensors; pH, ORP, conductivity/ TDS, chlorine, turbidity, TSS, 4-20 mA
Output Dual current output per channel, 4-20 mA DC, galvanically isolated, max load 750Ω
Option of linear, bilinear and logarithmic
Maths functions % accepted : X/Y*100 [%]
% rejection : (1-X/Y)* 100 [%]
Difference : X-Y
Addition : X+Y
Comparator or ratio function : X/Y or Y/X
Note - X, Y : channel 1 or 2
Temperature -20 to 200 Deg C
Pt100, Pt1000, 2 wire
Temperature compensation, linear (ref. temp – 25 Deg.C) auto/manual
Modules Factory installed function cards can be reconfigured in the field
Parameters Card 1: communication RS 485 (MODBUS-RTU)
Card 2: pH, ORP, conductivity, TDS, Chlorine, Turbidity, TSS, 4-20 mA
Card 3: pH, ORP, conductivity, TDS, Chlorine, Turbidity, TSS, 4-20 mA
Card 4: Relay 6 nos. Rated 250 VAC 5A
Power 110 - 240 VAC, 50/60 Hz (UPS recommended), 40 watt
Electrical EMC : IEC 61326-1
Vibration : IEC 60068-2-6
Ingress Protection (IP) : IEC60529
Safety/LVD : IEC/EN 61010-1 CE Compliant*
Service test Current: test current can be specified for output 1 and 2
In-built power supervisory circuit for data integrity and memory
Display of last error that occurred
Sensor test, display of direct, raw sensor signal
Housing MOC polycarbonate, 10% glass filled
Colour RAL 9007
Panel, wall and 2” pipe mounting
Ingress protection IP66
Dimensions H 144mm X W 144mm X Depth 103mm
Cable Gland M20 X 6 nos
Weight 1 Kg
Environmental Ambient temperature: -20 to 60 DegC
Transport, storage temperature: -20 to 80 DegC
Relative humidity: 95% at temperature up to 55 DegC

Chlorine Monitoring System

Type Amperiometric free chlorine
Cathode: Gold, Anode: Silver chloride (AgCL)
Sample pH range 5.5 - 8.5
Body material PVC, O-ring material: Viton
Membrane cap material PVDF
Temperature range 0 - 45 degrees C
Maximum pressure 14.7 psig (1 Bar)
Temp compensation Integrated
Process connection Flow cell 1/4 inch FNPT threads
Output 4-20mA
Flow range Min 0.2 gpm (45 l/hr), max 0.6 gpm (135 l/hr)
Calibration Process calibration with sample, validation against DPD method
Turbidity and TSS Monitoring System
Type IR LED 860 nm light attenuation / optical absorption
MOC SS316 body
Cleaning Automatic wiper cleaning function
Calibration Single point zero calibration using DM/DI water
Detector Scratch resistant safire glass
Operating temp 0-60 deg C non freezing
Protection IP68
Cable 10 mtr integrated
Calibration Single point zero calibration; DM/DI water

pH / ORP Measurement
Measurement Range Unit Resolution Accuracy
pH 0 to 14 pH 0.01 ± 0.01 pH
ORP -2000 to +2000 mV 1 ± 1 mV
Temperature -20 to 200 Deg C ºC 0.1 ±0.5% of full scale

Conductivity Measurement
Measurement Range Unit Resolution Accuracy
Cell K: 0.01 0 µS/cm to 20 µS/cm µS/cm, ms/cm 0.01 µS/cm ±0.5% of FS
Cell K: 0.01 0 µS/cm to 200 µS/cm µS/cm, ms/cm 0.1 µS/cm ±0.5% of FS
Cell K: 0.1 0 µS/cm to 2000 µS/cm µS/cm, ms/cm 0.1 µS/cm ±0.5 % of FS
Cell K: 1 0 µS/cm to 20 ms/cm ms/cm 0.01 ms/cm ±0.5 % of FS
Cell K: 10 0 µS/cm to 200 ms/cm ms/cm 0.1 ms/cm ±0.5 % of FS

TDS Measurement
Measurement Range Unit Resolution Accuracy
Cell K: 0.01 0 to 140 mg/L mg/L, g/L 0.01 mg/L ±0.5 % of FS
Cell K: 0.1 0 to 1400 mg/L mg/L, g/L 0.1 mg/L ±0.5 % of FS
Cell K: 1 0 to 14 g/L g/L 0.01 g/L ±0.5 % of FS
Cell K: 10 0 to 140 g/L g/L 0.1 g/L ±0.5 % of FS
* Note: Above range with TDS factor as 0.7 other factor user programmable

Chlorine Monitoring: Amperiometric System

Measurement Range Unit Resolution Accuracy
FMSNX2 0-2 ppm mg/L, ppm 0.01 ± 5% of measured against reference test*(DPD)
FMSNX5 0-5 ppm mg/L, ppm 0.01 ± 5% of measured against reference test*(DPD)
FMSNX10 0-10 ppm mg/L, ppm 0.01 ± 5% of measured against reference test*(DPD)
* Note: Constant pH value within range 5.5 - 8.5

Chlorine Dioxide Monitoring

Measurement Range Unit Resolution Accuracy
FMCLD2 0-2 ppm mg/L 0.01 ± 5% of measured against reference test
FMCLD5 0-5 ppm mg/L 0.01 ± 5% of measured against reference test
FMCLD10 0-10 ppm mg/L 0.01 ± 5% of measured against reference test

Turbidity and TSS Monitoring System

Measurement Range Unit Resolution Accuracy
FMTC100 (Turb) 0-100 FTU FTU/NTU/FNU 0.1 ±2% of measured
FMTC500 (Turb) 0-500 FTU FTU/NTU/FNU 1 ±2% of measured
FMTC3000 (Turb) 0-3000 FTU FTU/NTU/FNU 5 ±2% of measured
FMTCS1000 (TSS) 0-1000 mg/L ppm, mg/L 0.1, 1 ±3% of measured

Analogue Input Card (DO)

Measurement Range Unit Resolution Accuracy
Visiwater Plastic 0-20 ppm ppm 0.1, 0.01 ppm Accuracy at 25 °C 0.4 ppm ± 5 %; 8 ppm ± 1 %; 20 ppm ± 5 %
Visitrace 0-2000 ppb ppb 0.1 ppb Accuracy at 25°C ± 0.5 ppb or 2% whichever is greater
Ordering Information- Configuration Selection : A4T-P-C1-C2-C3-C4-C5
A4T Transmitter Type
P Panel mounting
W Wall, common field mounting

C1 Card Input # 1
0 Nil
1 RS485 MODBUS

C2 Card Input # 2
1 pH
2 Redox/ORP
3 Conductivity/Ratio
4 TDS
5 Chlorine
6 Turbidity
7 TSS
8 Analogue Input Card(DO)

C3 Card Input # 3
0 Nil
1 pH
2 Redox/ORP
3 Conductivity /Ratio
4 TDS
5 Chlorine
6 Turbidity
7 TSS
8 Analogue Input Card (DO)

C4 Card Input # 4
0 Nil
1 Relay- 6 nos

C5 Configuration*
00 Default
01 Ratio conductivity

A4T P 0 1 2 0 XX Complete Ordering Code

Dimensional Drawings

Note : All dimensions in mm.

Mounting Drawings

2'’ pipe
Wall mounting

A-34/35, MIDC H Block

Pimpri, Pune - 411 018. INDIA.
Tel : 91(0)20-27442020, 68131100
Fax : 91(0)20-27442040
Forbes Marshall
Krohne Marshall CIN No.: U28996PN1985PTC037806
Forbes Marshall Arca Email : [email protected], [email protected] www.forbesmarshall.com
Codel International © All rights reserved. Any reproduction or distribution in part or as a whole without written permission of Forbes Marshall Pvt Ltd, its associate
Forbes Solar companies or its subsidiaries (“FM Group”) is prohibited.
Information, designs or specifications in this document are subject to change without notice. Responsibility for suitability, selection, installation, use,
Forbes Vyncke operation or maintenance of the product(s) rests solely with the purchaser and/or user. The contents of this document are presented for informational
Forbes Marshall Steam Systems purposes only. FM Group disclaims liabilities or losses that may be incurred as a consequence of the use of this information.

DOC#FMPA/1219/1563/V3.R4