CA1 REVISION Question Paper

Download as doc, pdf, or txt
Download as doc, pdf, or txt
You are on page 1of 2

Register Number

B.Tech DEGREE EXAMINATIONS NOV/2021


Continuous Assessment I Examinations V Semester
COMPUTER SCIENCE AND ENGINEERING
Year of Admission 2019
XCSE53 DATA COMMUNICATION
Time: 2 hours Maximum Marks: 50
Instructions to the Candidates
Answer all the Questions.
PART- A (10 X 1 = 10)
1) Computer network is
a) Collection of hardware components and computers
b) Interconnected by communication channels
c) Sharing of resources and information
d) All the above
2) The term WAN stands for
a) Wide Access Network
b) Wide Area Network
c) Web Area Network
d) World area Network
3) How many layers does OSI Reference Model has?
a) 6 b) 5
c) 7 d) 9
4) Router operates in which layer of OSI Reference Model?
a) Physical Layer b) Transport Layer
c) Network Layer d) Application Layer

5) The physical layer is responsible for movements of individual


a) Frame b) Bit
c) Byte d) Packet

CA1/XCA205/10.05.2021 1
6) Frames issued by the secondary station of High-level data link control , known as?
a) Response b) Command
c) Link d) None of these
7) The data link layer divide the stream of bits received from the network layer into data units is known as
a) Frame b) Segment
c) Datagrams d) Message
8) CRC abbreviated as
a) Code Redundancy Check b) Code Repeat Check
c) Cyclic Redundancy Check d) Cyclic Repeat Check
9) The data link layer takes the packets from and sends them into frames for transmission.
a) Application layer b) Physical layer
c) Network layer d) All of the above
10) category of High-level data link control frames undergoes error&flow control techniques by comprising
send and receive sequence numbers?
a) U-frames b) S-frames
c) I-frames d) All of the above

PART-B (5 X 2 = 10)

11) Define any one network hardware device.

12) List the OSI reference model layers.


13) Write down the 3 protocol aspects.
14) State the Types of Error.
15) Define flow control.

PART – C (2 X 15 =30)
16) a. (i) Elaborate the OSI reference model. (08)
(ii) State that TCP/IP protocol. (07)
(OR)
b. (i) Write note on Protocol Hierarchies. (07)
(ii) Illustrate the Guided Transmission medium. (08)
17) a. (i) Write about an Error control and Error control techniques. (10)
(ii) Demonstrate HDLC and HDLC Frame. (05)
(OR)
b.(i) Brief Error Detection and Error Correction codes. (10)
(ii) Explain an Elementary DLL protocols. (05)

CA1/XCA205/10.05.2021 2

You might also like