Scribd Logo
Upload

Welcome to Scribd!

  • 21 views

    ds2001 PDF

    Uploaded by

    Giancarlo
    1) The document provides specifications for Waterous T Series two-gear fire pump transmissions that can be mounted on an engine bellhousing. 2) The transmissions are available in medium and heavy duty models with different helical gear data, available ratios, input shafts, and bellhousing adapters depending on the transmission type and pump model used. 3) To order a transmission, the appropriate T model must be specified along with the mounting position, input rotation, ratio, and required drive plate part number based on the transmission duty and pump model.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    ds2001 PDF

    Uploaded by

    Giancarlo
    21 views3 pages
    1) The document provides specifications for Waterous T Series two-gear fire pump transmissions that can be mounted on an engine bellhousing. 2) The transmissions are available in medium and heavy duty models with different helical gear data, available ratios, input shafts, and bellhousing adapters depending on the transmission type and pump model used. 3) To order a transmission, the appropriate T model must be specified along with the mounting position, input rotation, ratio, and required drive plate part number based on the transmission duty and pump model.

    Original Title

    ds2001.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1) The document provides specifications for Waterous T Series two-gear fire pump transmissions that can be mounted on an engine bellhousing. 2) The transmissions are available in medium and heavy duty models with different helical gear data, available ratios, input shafts, and bellhousing adapters depending on the transmission type and pump model used. 3) To order a transmission, the appropriate T model must be specified along with the mounting position, input rotation, ratio, and required drive plate part number based on the transmission duty and pump model.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    21 views3 pages

    ds2001 PDF

    Uploaded by

    Giancarlo
    1) The document provides specifications for Waterous T Series two-gear fire pump transmissions that can be mounted on an engine bellhousing. 2) The transmissions are available in medium and heavy duty models with different helical gear data, available ratios, input shafts, and bellhousing adapters depending on the transmission type and pump model used. 3) To order a transmission, the appropriate T model must be specified along with the mounting position, input rotation, ratio, and required drive plate part number based on the transmission duty and pump model.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Data Sheet

    Form No. Issue Date Rev. Date


    DS-2001 04/19/96 2/10/20

    Waterous T Series Two-Gear Fire Pump Transmissions


    For Mounting on an Engine Bellhousing
    SAE Flywheel for driving ring-type over center clutch per SAE J620

    Available K Series Transmissions


    Transmission Helical Gear Data Available
    For Pumps Available on
    Center Rated Bellhousing For Pump Models
    Type Model Duty Pitch Face Width
    Distance Adapters Clutch No.
    10
    SAE No. 3
    11-1/2
    500 GPM 7-1/2 CLR, CLV
    4-19/32 in.
    Medium 12 1-1/2 in. (1893 L/min) CP-2, CP-3
    116.69 mm SAE No. 4 8
    Two-Gear or Less CP-4, CP-4UH
    Speed 10
    Increasor
    T SAE No. 5 6-1/2
    for Direct
    Engine 10
    Mounting SAE No. 2
    500 GPM 11-1/2
    4-19/32 in. CGV, CGVR
    Heavy 8 1-5/8 in. (1893 L/min) 10
    116.69 mm SAE No. 3 CXN, CXS, CXV
    or Less 11-1/2
    SAE No. 4 11-1/2

    Specify a complete Transmission as follows:


    Transmission Model:

    Add T Transmission model to desired pump model listed in table above.


    Examples: CLRT, CPT-2, CGVT, CXVT

    Case Mounting Position:


    Mounting Position
    Transmission
    Horizontal
    Duty Vertical Inverted
    Left Side Right Side
    Medium X X X X
    Heavy X X Not Available

    Note: Some mounting positions are not available with certain pump models, refer to pump dimensional drawings.

    Input Rotation:
    Transmission
    Input Rotation
    Duty
    Clockwise (CW) or
    Medium
    Counter Clockwise (CCW)
    Clockwise (CW) or
    Heavy
    Counter Clockwise (CCW)

    DS-2001 Page 1 of 3
    Waterous T Series Two-Gear Fire Pump Transmissions

    Input Shaft:
    Transmission Duty Available Shafts
    1-1/2-10 SAE Splined Shaft or
    Medium
    1 in.-15T Involute Splined Shaft
    Heavy 1-3/4-10 SAE Splined Shaft

    Ratio:

    Transmis- Available Ratios


    Pump
    sion
    Model 1.16 1.38 1.42 1.44 1.56 1.62 1.65 1.76 1.88 1.97
    Duty

    CP-2, CP-3, CP-4


    - - - X - X - - - X
    Medium CLR, CLV

    CP-4UH - - - - - - - - - -

    CGV, CGVR
    Heavy X X - - X - X X X -
    CXN, CXR, CXV

    Available Ratios
    Transmis-
    Pump See Note
    sion
    Model 2.14 2.33 2.45 2.55 2.79 2.93 3.40
    Duty
    4.00 4.79

    CP-2, CP-3, CP-4


    - X - X X X X X X
    Medium CLR, CLV

    CP-4UH - - - - - - - - X

    CGV, CGVR
    Heavy X - X - - - - - -
    CXN, CXR, CXV

    Note: 4.00 and 4.79 ratios are not available with CP-3 pump models.

    Bellhousing Adapter:
    Transmission Duty Input Shafts Bellhousing Adapter
    SAE No. 3
    1-1/2-10 SAE Splined Shaft
    SAE No. 4
    Medium
    SAE No. 4
    1 in.-.15T Involute Splined Shaft
    SAE No. 5
    SAE No. 2
    Heavy 1-3/4-10 SAE Splined Shaft SAE No. 3
    SAE No. 4

    DS-2001 Page 2 of 3
    Waterous T Series Two-Gear Fire Pump Transmissions

    Drive Plate (Required):


    Bellhousing Drive Plate
    Transmission Duty Pump Model Input Shaft Clutch No.
    Adapter Part No.
    10 V 3807
    SAE No. 3
    11-1/2 V 2461
    1-1/2-10 SAE Spline
    CLR, CLV 8 V 2852
    SAE No. 4
    CP-2, CP-3, CP-4 10 V 3807
    SAE No. 4 7-1/2 V 4128
    1 in.-.15T Involute Spline
    Medium SAE No. 5 6-1/2 V 2865
    10 V 2272
    SAE No. 3
    11-1/2 V 2461
    1-1/2-10 SAE Spline
    CP-4UH 8 V 2852
    SAE No. 4
    10 V 2272
    1 in.-.15T Involute Spline SAE No. 5 6-1/2 V 2865
    10 V 2462
    SAE No. 2
    11-1/2 V 2463
    CGV, CGVR
    Heavy 1-3/4-10 SAE Spline 10 V 2462
    CXN, CXR, CXV SAE No. 3
    11-1/2 V 2463
    SAE No. 4 10 V 2462

    DS-2001 Page 3 of 3

    You might also like