Scribd Logo
Upload

Welcome to Scribd!

  • 950 views

    Kingrinder Manual - Exterior Adjustment - V3

    Uploaded by

    Leandro Silva Pinto
    This manual provides instructions for operating and adjusting the K4 and K6 hand coffee grinders from KINGrinder. It explains how to load beans and grind coffee, install parts like the PC lid, adjust the grind size, disassemble and assemble the grinder, and lists do's and don'ts. The manual includes a table showing recommended grind size ranges for different coffee styles from extra fine to coarse on the K4 and K6 models.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Kingrinder Manual - Exterior Adjustment - V3

    Uploaded by

    Leandro Silva Pinto
    950 views3 pages
    This manual provides instructions for operating and adjusting the K4 and K6 hand coffee grinders from KINGrinder. It explains how to load beans and grind coffee, install parts like the PC lid, adjust the grind size, disassemble and assemble the grinder, and lists do's and don'ts. The manual includes a table showing recommended grind size ranges for different coffee styles from extra fine to coarse on the K4 and K6 models.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This manual provides instructions for operating and adjusting the K4 and K6 hand coffee grinders from KINGrinder. It explains how to load beans and grind coffee, install parts like the PC lid, adjust the grind size, disassemble and assemble the grinder, and lists do's and don'ts. The manual includes a table showing recommended grind size ranges for different coffee styles from extra fine to coarse on the K4 and K6 models.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    950 views3 pages

    Kingrinder Manual - Exterior Adjustment - V3

    Uploaded by

    Leandro Silva Pinto
    This manual provides instructions for operating and adjusting the K4 and K6 hand coffee grinders from KINGrinder. It explains how to load beans and grind coffee, install parts like the PC lid, adjust the grind size, disassemble and assemble the grinder, and lists do's and don'ts. The manual includes a table showing recommended grind size ranges for different coffee styles from extra fine to coarse on the K4 and K6 models.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    KINGrinder Manual

    Exterior Adjustment of K4 and K6 Hand Coffee Grinder

    How to operate the grinder?

    1. Rotate the adjustment nut for the desired grind setting.


    2. Take out the handle and PC lid, load 30~35g of coffee beans into it.
    3. Put on the handle and PC lid then spin the handle clockwise till it has done.

    How to install the PC lid? (There are method A and method B)

    A. Default setting: the PC lid and B. Attach the PC lid and handle:
    handle are separate-able for Take out the Black O-ring -
    grinding (drill-grinding is Place the White O-ring into the
    applicable). groove.

    How to adjust the grind setting?

    1. Gently rotate the adjustment nut clockwise to zero.


    The corresponding number is zero and the number
    on the adjustment nut may not be the same as the
    number of clicks from the grind setting.
    2. Rotate the adjustment nut anti-clockwise from zero to your grind size.
    3. Rotate the adjustment nut anti-clockwise for a coarser grind and vice versa.

    K4 K6

    Extra Fine 15~50 15~25

    Fine 50~60 25~60

    Medium-Fine 60~90

    Medium 90~120

    Coarse 150
    How to disassemble the grinder?

    1. Rotate the adjustment nut anti-clockwise for a coarser grind before


    dismantling the grinder.
    2. Hold down the burr set with a hand and remove the circlip with another
    hand.
    3. Take out the components in order. The burr set (attached with the central
    shaft), the bearing cover and the spring from the burr set. Then the top
    bearing cover and the top bearing from the above.

    How to assemble the grinder?

    1. Put on the components in order. The spring and the bearing cover and
    then put the burr set back to the grinder.
    2. Hold down the burr set with a hand and put on the top bearing and the top
    bearing cover. There are two shapes of the top bearing cover: flat design
    and curve design. The curve design shape of the top bearing cover faces
    upward.
    3. Slide the circlip onto the curve design shape of the top bearing cover with
    another hand.

    What’s to do and not to do?

    ● Cleansing with a brush.


    ● Don’t wash the grinder with water.
    ● Don’t disassemble the burr set unit and the adjustment nut.
    ● Don’t rotate the adjustment nut when the grinder is on zero setting.

    @: [email protected]
    Website: www.kingrinder.com
    Instagram: KINGrinder
    Linktree: KINGrinder

    You might also like