Standard Crystal Corporation

9940 E. Baldwin Place, El Monte, CA 91731

Phone (800) 423-4578, (626) 443-2121 Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
About Standard Crystal Corporation

The company has been in business since 1957. It occupies a modern

12,400 sq. ft. Plant (build in 1977) designed expressly for the
manufacture of crystal and oscillator products.

It is located in the city of El Monte which is located in Los Angeles

County. The is located adjacent to Interstate 10, also known as the
San Bernadino Freeway.

In 1993 we added the capability of manufacturing products in China.

This gives us the advantage of both large and small volume production
to support all our customer needs.

The most modern and sophisticated equipment is used to efficiently

and accurately test and manufacture each crystal and hybrid oscillator.
All crystal and oscillator designs have been computerized to minimize
error. Our company also has application assistance and research and
development capabilities available for in-house and customer use.

We are continually improving quality and expanding our product lines

to meet the needs of our customers. Information furnished by Standard
Crystal Corporation is believed to be accurate and reliable. However,
no responsibility is assumed by Standard Crystal Corporation for it
use, nor for any infringements of patents or other rights of third parties
which may result from its use.

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
 TABLE OF CONTENTS

OSCILLATORS
PAGE
OSCILLATOR QUICK SELECTOR GUIDE.................................. A-1 ~ A-3
HCMOS/TTL 5X7 CERAMIC SMD............................................... O-1
HCMOS/TTL FULL SIZE ............................................................ O-2
HCMOS/TTL HALF SIZE ........................................................... O-3
TTL FULL SIZE ......................................................................... O-4
TTL HALF SIZE ........................................................................ O-5
FAST TTL FULL SIZE ............................................................... O-6
VCXO 5X7 CERAMIC SMD 6 PAD ............................................ O-7
VCXO FULL SIZE ..................................................................... O-8
VCXO HALF SIZE .................................................................... O-9
ECL FULL SIZE ........................................................................ O-10
ECL HALF SIZE ....................................................................... O-11
DTCXO FULL SIZE ................................................................... O-12
TCXO FULL SIZE ..................................................................... O-13
TCXO 7X9 CERAMIC SMD 4 PAD ............................................. O-14
TC & VCXO FULL SIZE SMD .................................................... O-15
VTCXO 9X11 CERAMIC SMD 4 PAD ......................................... O-16
VTCXO 9X11 CERAMIC SMD 6 PAD ......................................... O-17
VTCXO 3X5 CERAMIC SMD 4 PAD .......................................... O-18
VTCXO 7X9 CERAMIC SMD 4 PAD .......................................... O-19
VTCXO 3X6 CERAMIC SMD 4 PAD .......................................... O-20

CRYSTALS
PAGE
CRYSTAL QUICK SELECTOR GUIDE ....................................... A-4 & A-5
HC49U ..................................................................................... C-1
HC49US & HC49USS (LOW PROFILE) ......................................C-2
HC49UP & HC49UPS (LOW PROFILE SMD) ............................. C-3
5X7 CERAMIC SMD 2 PAD & 4 PAD ......................................... C-4
6X3 CERAMIC SMD 2 PAD & 4 PAD ......................................... C-5
5X3 CERAMIC SMD 2 PAD & 4 PAD ......................................... C-6
UM-1 ....................................................................................... C-7
UM-5 ....................................................................................... C-8
UM-4 ....................................................................................... C-9
TO-5 ........................................................................................ C-10
HC51U & HC6U ........................................................................ C-11
3X9 CYLINDRICAL ................................................................... C-12

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
STANDARD CRYSTAL CORP. OSCILLATOR QUICK SELECTOR GUIDE

HCMOS Dimensions mm/inch Family Package Voltage Temp. Range Freq. Tolerance Pin #1 & Symmetry Frequency

5 x 7.5 x 1.6 Max. HCMOS 5x7mm 1= 5V A= 0E to 70EC 0D= ±100ppm A=Pin #1 Enable Hi (MHz)
/TTL SMD 3= 3.3V B= -40E to 85EC 1D= ±50ppm D=45/55%
0.197 x 0.29 x 0.07 Symmetry
page O-1
Part Number CH 5 1 A 0D AD 40M00000

HCMOS Dimensions mm/inch Family Package Voltage Temp. Range Freq. Tolerance Options Frequency

20.8 x 13.2 x 5.1 HCMOS Full Size 1= 5V A= 0E to 70EC 0D= ±100ppm A=Pin #1 Enable Hi (MHz)
/TTL 3= 3.3V B= -40E to 85EC 1D= ±50ppm D=45/55%
0.82 x 0.52 x 0.20 Symmetry

page O-2 Part Number CH 1 1 A 0D AD 40M00000

HCMOS Dimensions mm/inch Family Package Voltage Temp. Range Freq. Tolerance Options Frequency

20.8 x 13.2 x 5.1 HCMOS Full Size 1= 5V A= 0E to 70EC 0D= ±100ppm A=Pin #1 Enable Hi (MHz)
/TTL GullWing 3= 3.3V B= -40E to 85EC 1D= ±50ppm D=45/55%
0.82 x 0.52 x 0.20 Symmetry

page O-2 Part Number CH 3 1 A 0D AD 40M00000

HCMOS Dimensions mm/inch Family Package Voltage Temp. Range Freq. Tolerance Options Frequency

13.2 x 13.4 x 5.08 HCMOS Half Size 1= 5V A= 0E to 70EC 0D= ±100ppm A=Pin #1 Enable Hi (MHz)
/TTL 3= 3.3V B= -40E to 85EC 1D= ±50ppm D=45/55%
0.52 x 0.52 x 0.20 Symmetry

page O-3 Part Number CH 2 1 A 0D AD 40M00000

HCMOS Dimensions mm/inch Family Package Voltage Temp. Range Freq. Tolerance Options Frequency

13.2 x 13.4 x 5.08 HCMOS Half Size 1= 5V A= 0E to 70EC 0D= ±100ppm A=Pin #1 Enable Hi (MHz)
/TTL GullWing 3= 3.3V B= -40E to 85EC 1D= ±50ppm D=45/55%
0.52 x 0.52 x 0.20 Symmetry

page O-3 Part Number CH 4 1 A 0D AD 40M00000

TTL Dimensions mm/inch Family Package Voltage Temp. Range Freq. Tolerance Options Frequency

20.8 x 13.2 x 5.1 TTL Full Size 1= 5V A= 0E to 70EC 0D= ±100ppm A=Pin #1 Enable Hi (MHz)
3= 3.3V B= -40E to 85EC 1D= ±50ppm D=45/55%
0.82 x 0.52 x 0.20 Symmetry

page O-4 Part Number T 1 1 A 0D AD 40M00000

TTL Dimensions mm/inch Family Package Voltage Temp. Range Freq. Tolerance Options Frequency

20.8 x 13.2 x 5.1 TTL Full Size 1= 5V A= 0E to 70EC 0D= ±100ppm A=Pin #1 Enable Hi (MHz)
GullWing 3= 3.3V B= -40E to 85EC 1D= ±50ppm D=45/55%
0.82 x 0.52 x 0.20 Symmetry

page O-4 Part Number T 3 1 A 0D AD 40M00000

TTL Dimensions mm/inch Family Package Voltage Temp. Range Freq. Tolerance Options Frequency

13.2 x 13.4 x 5.08 TTL Half Size 1= 5V A= 0E to 70EC 0D= ±100ppm A=Pin #1 Enable Hi (MHz)
3= 3.3V B= -40E to 85EC 1D= ±50ppm D=45/55%
0.52 x 0.52 x 0.20 Symmetry
page O-5
Part Number T 2 1 A 0D AD 40M00000

TTL Dimensions mm/inch Family Package Voltage Temp. Range Freq. Tolerance Options Frequency

13.2 x 13.4 x 5.08 TTL Half Size 1= 5V A= 0E to 70EC 0D= ±100ppm A=Pin #1 Enable Hi (MHz)
GullWing 3= 3.3V B= -40E to 85EC 1D= ±50ppm D=45/55%
0.52 x 0.52 x 0.20 Symmetry

page O-5 Part Number T 4 1 A 0D AD 40M00000

A-1
STANDARD CRYSTAL CORP. OSCILLATOR QUICK SELECTOR GUIDE

FAST TTL Dimensions mm/inch Family Package Voltage Temp. Range Freq. Tolerance Options Frequency

20.8 x 13.2 x 5.1 FAST Full Size 1= 5V A= 0E to 70EC 0D= ±100ppm A=Pin #1 Enable Hi (MHz)
TTL 3= 3.3V B= -40E to 85EC 1D= ±50ppm D=45/55%
0.82 x 0.52 x 0.20 Symmetry

page O-6 Part Number TF 1 1 A 0D AD 40M00000

FAST TTL Dimensions mm/inch Family Package Voltage Temp. Range Freq. Tolerance Options Frequency

20.8 x 13.2 x 5.1 FAST Full Size 1= 5V A= 0E to 70EC 0D= ±100ppm A=Pin #1 Enable Hi (MHz)
TTL GullWing 3= 3.3V B= -40E to 85EC 1D= ±50ppm D=45/55%
0.82 x 0.52 x 0.20 Symmetry

page O-6 Part Number TF 3 1 A 0D AD 40M00000

VCXO Dimensions mm/inch Family Package Voltage Temp. Range Freq. Tolerance Frequency Max. Pullability

5.2 x 7.5 x 1.8 Max. VCXO 5x7 1= 5V A= 0E to 70EC 0D= ±100ppm (MHz) A=±100ppm Max.
SMD 3= 3.3V B= -40E to 85EC 1D= ±50ppm B=±50ppm Max.
0.29 x 0.20 x 0.07

page O-7 Part Number V 5 1 A 0D 40M00000 A

VCXO Dimensions mm/inch Family Package Voltage Temp. Range Freq. Tolerance Frequency Max. Pullability

20.8 x 13.2 x 5.1 VCXO Full Size 1= 5V A= 0E to 70EC 0D= ±100ppm (MHz) A=±100ppm Max.
3= 3.3V B= -40E to 85EC 1D= ±50ppm B=±50ppm Max.
0.82 x 0.52 x 0.20

page O-8 Part Number V 1 1 A 0D 40M00000 A

VCXO Dimensions mm/inch Family Package Voltage Temp. Range Freq. Tolerance Frequency Max. Pullability

20.8 x 13.2 x 5.1 VCXO Full Size 1= 5V A= 0E to 70EC 0D= ±100ppm (MHz) A=±100ppm Max.
GullWing 3= 3.3V B= -40E to 85EC 1D= ±50ppm B=±50ppm Max.
0.82 x 0.52 x 0.20

page O-8 Part Number V 3 1 A 0D 40M00000 A

VCXO Dimensions mm/inch Family Package Voltage Temp. Range Freq. Tolerance Frequency Max. Pullability

20.8 x 13.2 x 5.1 VCXO Half Size 1= 5V A= 0E to 70EC 0D= ±100ppm (MHz) A=±100ppm Max.
3= 3.3V B= -40E to 85EC 1D= ±50ppm B=±50ppm Max.
0.82 x 0.52 x 0.20

page O-9 Part Number V 2 1 A 0D 40M00000 A

VCXO Dimensions mm/inch Family Package Voltage Temp. Range Freq. Tolerance Frequency Max. Pullability

13.2 x 13.4 x 5.08 VCXO Half Size 1= 5V A= 0E to 70EC 0D= ±100ppm (MHz) A=±100ppm Max.
GullWing 3= 3.3V B= -40E to 85EC 1D= ±50ppm B=±50ppm Max.
0.52 x 0.52 x 0.20

page O-9 Part Number V 4 1 A 0D 40M00000 A

ECL Dimensions mm/inch Family Package Voltage Temp. Range Freq. Tolerance Frequency Pin Configurations

20.8 x 13.2 x 5.1 ECL Full Size 1= 5V A= 0E to 70EC 0D= ±100ppm (MHz) please see page 10
B= -40E to 85EC 1D= ±50ppm
0.82 x 0.52 x 0.20

page O-10 Part Number E 1 1 A 0D 40M00000 AC

ECL Dimensions mm/inch Family Package Voltage Temp. Range Freq. Tolerance Frequency Pin Configurations

20.8 x 13.2 x 5.1 ECL Full Size 1= 5V A= 0E to 70EC 0D= ±100ppm (MHz) please see page 10
GullWing B= -40E to 85EC 1D= ±50ppm
0.82 x 0.52 x 0.20

page O-10 Part Number E 3 1 A 0D 40M00000 AC

A-2
STANDARD CRYSTAL CORP. OSCILLATOR QUICK ELECTOR GUIDE
DTCXO Dimensions mm/inch Family Package Voltage Temp. Range Output Wave Frequency Freq. Stability

15 x 25 x 14 DTCXO Thru-Hole 5V A= 0E to 70EC H=CMOS & TTL (MHz) ±1.0~±0.3ppm

B= -20E to 70EC S=Sine Wave
0.59 x 0.98 x 0.55

page O-12 Part Number DTC 1525T A H 12M288000 -1.0

DTCXO Dimensions mm/inch Family Package Voltage Temp. Range Output Wave Frequency Freq. Stability

12.6 x 18.6 x 10 TCXO Thru-Hole 5V A= 0E to 60EC H=CMOS & TTL (MHz) ±10.0~±0.3ppm
B= -20E to 70EC S=Sine Wave
0.49 x 0.73 x 0.40

page O-13 Part Number TC 1218T A H 12M288000 -10.0

TCXO SMD Dimensions mm/inch Family Package Voltage Temp. Range Output Load Frequency Freq. Stability

7.0 x 9.0 x 2.0 TCXO 7x9 SMD 3V -20E to 75EC [10k Ohms/10pF]±10% (MHz) see Page O-14
4 pad
0.28 x 0.36 x 0.08

page O-14 Part Number TC 79-4- 12M288000

TC & VCXO Dimensions mm/inch Family/ Package Freq. Stability Temp. Range Output Load Freq. Deviation Frequency

7.62 x 18.3 x 4.5 TC & VCXO See Table See Table C= CMOS/ TTL Blank= TCXO (Mhz)
14 Pin SMD Page O-15 Page O-15 Compatible 5 = ±5ppm
0.3 x 0.72 x 0.18 5Vdc (2 digit code) (1 letter code) S= Clipped Sinewave 10= ±10ppm

page O-15 Part Number TVCFS 25 C S 10 12M28800

VTCXO SMD Dimensions mm/inch Family Package Voltage Temp. Range Output Load Frequency Freq. Stability

9.6 x 11.4 x 2.3 VTCXO 9x11 SMD 3V -30E to 75EC 10k Ohms/10pF (MHz) see Page O-16
4 pad
0.38 x 0.45 x 0.09
page O-16
Part Number VTC 911-4- 12M288000

VTCXO SMD Dimensions mm/inch Family Package Voltage Temp. Range Output Load Frequency Freq. Stability

9.6 x 11.4 x 2.3 VTCXO 9x11 SMD 3V -30E to 75EC 10k Ohms/10pF (MHz) see Page O-17
6 pad
0.38 x 0.45 x 0.09

page O-17 Part Number VTC 911-6- 12M288000

VTCXO SMD Dimensions mm/inch Family Package Voltage Temp. Range Output Load Frequency Freq. Stability

3.2 x 5.0 x 1.5 VTCXO 3x5 SMD 3V - 20E to 75EC [10k Ohms/10pF]±10% (MHz) see Page O-18
4 pad
0.13 x 0.20 x 0.06

page O-18 Part Number VTC 35-4- 12M288000

VTCXO SMD Dimensions mm/inch Family Package Voltage Temp. Range Freq. Stability Output Load Frequency

7.0 x 9.0 x 2.0 VTCXO 7x9 SMD 3V - 20E to 75EC 2.5= ±2.5ppm [10k Ohms/10pF]±10% (MHz)
4 pad 5 = ±5ppm
0.28 x 0.35 x 0.08
page O-19
Part Number VTC 79- 5- 12M288000

VTCXO SMD Dimensions mm/inch Family Package Voltage Temp. Range Output Load Frequency Freq. Stability

3.5 x 6.0 x 1.7 VTCXO 3x6 SMD 3V - 30E to 80EC 10pF/ 10k Ohms (MHz) ±2.5ppm
4 pad see Page O-20
0.14 x 0.24 x 0.07

page O-20 Part Number VTC 36-4- 12M288000

A-3
 OSCILLATORS

ENVIRONMENTAL SPECIFICATIONS

TEMPERATURE CYCLE: ±50PPM Max. 0 to 120EC, 3 Cycles, 2 Hrx. Max. each, 25 ±2EC ref.

SHOCK: 100G’S 0.10 millisec, ½ sinewave; 3 shocks each plane.

VIBRATION: 10Hz to 55Hz, 0.060" D.A., 55Hz to 2000Hz

35G’S Duration time @12 Hours.

HUMIDITY: 95% Relative humidity @ +85EC, 250 Hours.

MECHANICAL: Hermetically sealed package.

BEND TEST: Pins will withstand maximum bend of 90E reference to base for 2 bends.

MARKING INK: Epoxy, heat cured.

SOLVENT RESISTANCE: Isopropyl alcohol, Trichloromethane, Freon, TMC.

No marking or seal destruction. Dipped 1 minute @ +25EC ±5EC in Solvent.

SOLDERABILITY: Each wire lead terminal shall be solderable when tested as specified in Method
208 of MIL-STD-202.

NOTE: (1) Unit can be cleaned by only type of the solvents listed.
NOTE: (2) Ultrasonic degreaser no to be used.

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
 OSCILLATOR REQUEST FOR QUOTE SHEET

Your Company Name: _________________________________________________

Your Name: _________________________, Phone :_________________________

Fax: _______________________________, E-Mail: __________________________

Address: ____________________________________________________________

Quantity: ___________________________, Delivery: _________________________

Part Number: ______________________ Example: CH11A0DA20M000000

Family: ___________________________ (TTL, HCMOS, VCXO, Etc.)

Frequency: ________________________ MHz or KHz

Supply Voltage (Vdd): _______________ (5V, 3.3V)

Frequency Tolerance: ±______________ PPM @25EC

Frequency Stability: ±______________ PPM @ Operating Temperature Range

Operating Temperature Range: from_________EC to _________EC

Package Type: _____________________ (Full Size, Half Size, 5x7 SMD, Etc.)

Tri State/ Enable Hi: _________________

Symmetry: _________________________ (40/60%, 45/55% Duty Cycle)

Pin Connections (ECL Only): ___________ (AA, AC, ACE, Etc.)

Frequency Pullability (VCXO Only): ______ PPM Min.

Special Instructions: __________________________________________________

____________________________________________________________________

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
 HCMOS/TTL MINIATURE SMD

OSCILLATOR 5x7mm SURFACE MOUNT

SPECIFICATION
Frequency Range 1.544 MHz to 125.0 MHz

Storage Temperature Range -55EC to 125EC

Operating Temperature Range 0EC to 70EC or -40EC to 85EC

Input Voltage 5Vdc ± 0.5V 3.3Vdc ± 0.3V

Max. Input Current 5 - 80 mA

Logic “1" / “0" 90% Vdd Min. / 10% Vdd Max.

Output Symmetry 45 / 55% @ ½ Vp-p

Output Rise / Fall Time 100Sec. Max.

Output Load 10TTL Gates/ 50pF HCMOS 10LS TTL/ 15pF

Max.

Options on Pin 1 “1" = Enable, “0" = Disable

N/C = No Connection

Dimensions in mm

Pin Connections #1 Enable Hi #2 Ground FF capacitor

Note: External 0.01F
#3 Output #4 VDD required between pins 4 and 2

HCMOS 5x7 SMD Part Number Break Down

CH 5 1 A 0 D A 20M000000 (Frequency)

Supply Voltage Temp. Range Tolerance/ Stability Tri State Enable Hi

1= 5Vdc A= 0 to 70EC 0= ±100 PPM (Standard)
3= 3.3Vdc B= -40 to 85EC 1= ±50 PPM
4= ±25 PPM

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]

O-1
 HCMOS/ TTL FULL SIZE

OSCILLATOR THRU HOLE AND GULL WING SMD

FEATURES
! CMOS and TTL compatible
! Tri-State option available
! Selection of thru-hole or gull wing
! 14 pin dip
SPECIFICATIONS

Frequency Range 1MHz to 150MHz

Storage Temperature Range -55EC to 125EC

Operating Temperature Range 0EC to 70EC or -40EC to 85EC

Input Voltage 5V±0.5V or 3.3V 0.3V

Max. Input Current 5 - 80 mA

Logic “1" / “0" 90% Vdd Min. / 10% Vdd Max.

Output Symmetry 60 / 40% @ ½ Vp-p

Output Rise / Fall Time 100Sec. Max.

Output Load CMOS C = 15pF or 10TTL Gates

Options on Pin 1 “1" = Enable, “0" = Disable

N/C = No Connection
Dimensions in inches

FULL SIZE FULL SIZE GULL WING

HCMOS Full Size Thur Hole Part Number Break Down

CH 1 1 A 0 D A - Frequency

Package Supply Voltage Temp. Range Tolerance/ Stability Options

1= Full Size 1= 5Vdc A= 0 to 70EC 0= ±100 PPM Blank= Standard
3= Full Size 3= 3.3Vdc B= -40 to 85EC 1= ±50 PPM A= TS Enable Hi
Gull Wing 4= ±25 PPM D= Tight Symmetry
45/55%

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
O-2
 HCMOS/ TTL HALF SIZE

OSCILLATOR THRU HOLE AND GULL WING SMD

FEATURES
! CMOS and TTL compatible
! Tri-State option available
! Selection of thru-hole or gull wing
! 8 pin dip
SPECIFICATIONS

Frequency Range 1MHz to 150MHz

Storage Temperature Range -55EC to 125EC

Operating Temperature Range 0EC to 70EC or -40EC to 85EC

Input Voltage 5V±0.5V or 3.3V±0.3V

Max. Input Current 5 - 80 mA

Logic “1" / “0" 90% Vdd Min. / 10% Vdd Max.

Output Symmetry 60 / 40% @ ½ Vp-p

Output Rise / Fall Time 100Sec. Max.

Output Load CMOS C = 15pF or 10TTL Gates

Options on Pin 1 “1" = Enable, “0" = Disable

N/C = No Connection
Dimensions in inches

HALF SIZE HALF SIZE GULL WING

HCMOS Half Size Thur Hole Part Number Break Down

CH 2 1 A 0 D A - Frequency

Package Supply Voltage Temp. Range Tolerance/ Stability Options

2= Halfl Size 1= 5Vdc A= 0 to 70EC 0= ±100 PPM Blank= Standard
4= Half Size 3= 3.3Vdc B= -40 to 85EC 1= ±50 PPM A= TS Enable Hi
Gull Wing 4= ±25 PPM D= Tight Symmetry
45/55%

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
O-3
 TTL FULL SIZE

OSCILLATOR THRU HOLE AND GULL WING SMD

FEATURES
! Drive 1 to 10 TTL loads.
! Tri-State option available
! Selection of thru-hole or gull wing
! 14 pin dip
SPECIFICATIONS

Frequency Range 25MHz to 65MHz

Storage Temperature Range -55EC to 125EC

Operating Temperature Range 0EC to 70EC or -40EC to 85EC

Input Voltage 5V±0.5V or 3.3V±0.3V

Max. Input Current 90 mA

“1" / “0" Level 0.4V Max. / 2.4V Min.

Output Symmetry 60 / 40% @ ½ Vp-p

Output Rise / Fall Time 150Sec. Max.

Output Load 1 to 10 TTL Loads

Options on Pin 1 “1" = Enable, “0" = Disable

N/C = No Connection
Dimensions in inches

FULL SIZE FULL SIZE GULL WING

TTL Full Size Thur Hole Part Number Break Down

T 1 1 A 0 D A - Frequency

Package Supply Voltage Temp. Range Tolerance/ Stability Options

1= Fulll Size 1= 5Vdc A= 0 to 70EC 0= ±100 PPM Blank= Standard
3= Full Size 3= 3.3Vdc B= -40 to 85EC 1= ±50 PPM A= TS Enable Hi
Gull Wing 4= ±25 PPM D= Tight Symmetry
45/55%

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
O-4
 TTL HALF SIZE

OSCILLATOR THRU HOLE AND GULL WING SMD

FEATURES
! Drive 1 to 10 TTL loads
! Tri-State option available
! Selection of thru-hole or gull wing
! 8 pin dip
SPECIFICATIONS

Frequency Range 25MHz to 65MHz

Storage Temperature Range -55EC to 125EC

Operating Temperature Range 0EC to 70EC or -40EC to 85EC

Input Voltage 5V±0.5V or 3.3V±0.3V

Max. Input Current 90 mA

“1" / “0" Level 0.4V Max. / 2.4V Min.

Output Symmetry 60 / 40% @ ½ Vp-p

Output Rise / Fall Time 150Sec. Max.

Output Load 1 to 10 TTL Loads

Options on Pin 1 “1" = Enable, “0" = Disable

N/C = No Connection
Dimensions in inches

HALF SIZE HALF SIZE GULL

WING

TTL Half Size Thur Hole Part Number Break Down

T 2 1 A 0 D A - Frequency

Package Supply Voltage Temp. Range Tolerance/ Stability Options

2= Halfl Size 1= 5Vdc A= 0 to 70EC 0= ±100 PPM Blank= Standard
4= Half Size 3= 3.3Vdc B= -40 to 85EC 1= ±50 PPM A= TS Enable Hi
Gull Wing 4= ±25 PPM D= Tight Symmetry
45/55%

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
O-5
 FAST TTL FULL SIZE

OSCILLATOR THRU HOLE AND GULL WING SMD

FEATURES
! Drive 1 to 10 LS TTL loads.
! Selection of thru-hole or gull wing
! 14 pin dip

SPECIFICATIONS

Frequency Range 60MHz to 110MHz

Storage Temperature Range -55EC to 125EC

Operating Temperature Range 0EC to 70EC or -40EC to 85EC

Input Voltage 5V±0.5V

Max. Input Current 80 mA

“1" / “0" Level 0.5V Max. / 2.4V Min.

Output Symmetry 60 / 40% @ ½ Vp-p

Output Rise / Fall Time 70Sec. Max.

Output Load 1 to 10 LS TTL Loads

Options on Pin 1 “1" = Enable, “0" = Disable

N/C = No Connection
Dimensions in inches

FULL SIZE FULL SIZE GULL WING

FAST TTL Full Size Thur Hole Part Number Break Down

TF 1 1 A 0 D A - Frequency

Package Supply Voltage Temp. Range Tolerance/ Stability Options

1= Fulll Size 1= 5Vdc A= 0 to 70EC 0= ±100 PPM Blank= Standard
3= Full Size B= -40 to 85EC 1= ±50 PPM D= Tight Symmetry
Gull Wing 4= ±25 PPM 45/55 %

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
O-6
 VCXO 5x7 Surface Mount
VOLTAGE CONTROLLED CRYSTAL OSCILLATORS

SPECIFICATION
Frequency Range 8MHz to 36MHz

Storage Temperature Range -50EC to 125EC

Operating Temperature Range 0EC to 70EC or -40EC to 85EC

Input Voltage +5V ± 0.5V +3.3V ± 0.3V

Frequency Control +0.5V to +4.5V +0.3V to +3.0V

Frequency Deviation ± 80ppm Min. ± 100ppm Min.

Control Voltage 2.5 ± 2.0V 1.65 ± 1.5V

Input Current 30mA Max. 20mA Max.

Output Rise / Fall Time, Output Symmetry 80 Sec. Max., 40 / 60%

Output Load 15pF

Dimensions in mm

Recommended Pad Layout

VCXO 5x7 SMD Part Number Break Down

V 5 1 A 0D - 20M000000 - A

Holder Size Supply Voltage Temp. Range Tolerence/ Stability Pullability

5= 5x7 SMD 1= 5Vdc A= 0 to 70EC 0D= ±100 PPM A= 200 PPM Max.
3= 3.3Vdc B= -40 to 85EC 1D= ±50 PPM

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
O-7
 VCXO FULL SIZE
VOLTAGE CONTROLLED CRYSTAL OSCILLATORS

SPECIFICATION
Frequency Range 1MHz to 80MHz

Storage Temperature Range -55EC to 125EC

Operating Temperature Range 0EC to 70EC or -40EC to 85EC

Input Voltage +5V ± 0.5V or +3.3V ± 0.3V

Frequency Control +0.5V to +4.5V

Frequency Deviation Sensitivity 60 PPM / Volt at V control = +2V to +3V

Frequency Nominal Sensitivity V control = +2.5V ± 0.05V

Output Symmetry 40 / 60% @ 1.4V Level

Output Rise / Fall Time 150Sec. (0.4 to 2.4 Levels)

Output Load 10 TTL, CMOS Compatible

Dimensions in inches

FULL SIZE FULL SIZE GULL WING

VCXO Full Size Part Number Break Down

V 1 1 A 0D - 20M000000 - A

Holder Size Supply Voltage Temp. Range Tolerence/ Stability Pullability

1= Full Size 1= 5Vdc A= 0 to 70EC 0D= ±100 PPM A= 200 PPM Max.
3= Full Size 3= 3.3Vdc B= -40 to 85EC 1D= ±50 PPM
Gull Wing

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
O-8
 VCXO HALF SIZE
VOLTAGE CONTROLLED CRYSTAL OSCILLATORS

SPECIFICATION
Frequency Range 1MHz to 80MHz

Storage Temperature Range -55EC to 125EC

Operating Temperature Range 0EC to 70EC or -40EC to 85EC

Input Voltage +5V ± 0.5V or +3.3V ± 0.3V

Frequency Control +0.5V to +4.5V

Frequency Deviation Sensitivity 60 PPM / Volt at V control = +2V to +3V

Frequency Nominal Sensitivity V control = +2.5V ± 0.05V

Output Symmetry 40 / 60% @ 1.4V Level

Output Rise / Fall Time 150Sec. (0.4 to 2.4 Levels)

Output Load 10 TTL, CMOS Compatible

Dimensions in inches

HALF SIZE HALF SIZE GULL WING

VCXO Half Size Part Number Break Down

V 2 1 A 0D - 20M000000 - A

Holder Size Supply Voltage Temp. Range Tolerence/ Stability Pullability

2= Half Size 1= 5Vdc A= 0 to 70EC 0D= ±100 PPM A= 200 PPM Max.
4= Half Size 3= 3.3Vdc B= -40 to 85EC 1D= ±50 PPM
Gull Wing

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
O-9
 ECL Series FULL SIZE
DESCRIPTION
ECL (Emitter Coupled Logic) clock oscillators provide MECL 10K and 10HH compatible signals for applications such
as high speed computing, graphic workstations, digital communications and A/D conversion.

FEATURES
! 10K or 10Kh output compatible, +5.2V or -5.2V supply voltage
! Low output impedance
! Excellent noise margins
! Full size metal package

SPECIFICATIONS ECL Full Size Pin Configurations

Frequency Range 20MHz to 140MHz PIN AA AM AE

Frequency Stability ±100PPM, ±50PPM, ±25PPM 1 Case GND NC Enable /Disable

Operating Temperature 0EC to 70EC or -40EC to 85EC 7 -5.2V Case GND -5.2V
Range
8 Output Output Output
Storage Temperature Range -55EC to 125EC
14 GND -5.2V Case GND
Input Voltage + or -5.2V ± 0.5V
PIN AB AC AAC
Input Current 140mA Max.
1 NC NC Comp Output
Output Symmetry 40 / 60% @ 1.4V Level
7 -5.2V Case GND -5.2V
Output Rise / Fall Time <40Sec measured between 20 to 80%
voltage level 8 Output Output Output

“0" / “1" Levels -1.6V Max. / -1.0V Min. 14 Case GND +5.2V Case GND

Output Load Typical 50 Ohms to -2.0V DC PIN ACE AMC ACC

1 Enable/ Disable Comp Output Comp Output

7 Case GND Case GND Case GND

8 Output Output Output

14 +5.2V -5.2V +5.2V

Dimensions
(Inches)
ECL Part Number Break Down

E 1 1 A 0 D - 20M000000 - AC

Holder Supply Voltage Temp. Range Tolerence/ Stability Pin Configuration

1= Full Size 1= + or -5.2V ± 0.5V A= 0 to 70EC 0= ±100 PPM (See Table )
3= Full Size B= -40 to 85EC 1= ±50 PPM
Gull Wing

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
O-10
 ECL Series HALF SIZE
DESCRIPTION
ECL (Emitter Coupled Logic) clock oscillators provide MECL 10K and 10HH compatible signals for applications such
as high speed computing, graphic workstations, digital communications and A/D conversion.

FEATURES
! 10K or 10Kh output compatible, +5.2V or -5.2V supply voltage
! Low output impedance
! Excellent noise margins
! Half size metal package

SPECIFICATIONS ECL Half Size Pin Configurations

Frequency Range 20MHz to 140MHz PIN AA AM AE

Frequency Stability ±100PPM, ±50PPM, ±25PPM 1 Case GND NC Enable /Disable

Operating Temperature 0EC to 70EC or -40EC to 85EC 4 -5.2V Case GND -5.2V
Range
5 Output Output Output
Storage Temperature Range -55EC to 125EC
8 GND -5.2V Case GND
Input Voltage + or -5.2V ± 0.5V
PIN AB AC AAC
Input Current 140mA Max.
1 NC NC Comp Output
Output Symmetry 40 / 60% @ 1.4V Level
4 -5.2V Case GND -5.2V
Output Rise / Fall Time <40Sec measured between 20 to 80%
voltage level 5 Output Output Output

“0" / “1" Levels -1.6V Max. / -1.0V Min. 8 Case GND +5.2V Case GND

Output Load Typical 50 Ohms to -2.0V DC PIN ACE AMC ACC

1 Enable/ Disable Comp Output Comp Output

4 Case GND Case GND Case GND

5 Output Output Output

8 +5.2V -5.2V +5.2V

Dimensions
(Inches)
ECL Part Number Break Down

E 2 1 A 0 D - 20M000000 - AC

Holder Supply Voltage Temp. Range Tolerence/ Stability Pin Configuration

1= Half Size 1= + or -5.2V ± 0.5V A= 0 to 70EC 0= ±100 PPM (See Table)
3= Half Size B= -40 to 85EC 1= ±50 PPM
Gull Wing

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
O-11
 DTCXO THRU-HOLE
Digital Temperature Compensated Crystal Oscillators

SPECIFICATION

Frequency Range 3.5MHz to 25MHz

Input Voltage 5.0±10%Vdc

Output Voltage >500Mv(rms) CMOS/ 5 TTL

Frequency Stability ±0.3ppm ~ ±1ppm

Temperature Range 0~+70EC -20~+75EC -40~+75EC -55~+90EC

Output Load 270 Ohms / 100pF 1K Ohms or 5TTL +15pF

Output Wave Sine CMOS & TTL

Harmonics & Subharmonics <-30 db

Input Current <15mA

Calibration Range >±5ppm

Dimensions in mm

DTCXO Thru-Hole Part Number

DTC1525T- A H- 12M800000 (Frequency)

A= 0 to 70EC H= CMOS & TTL

B= -20 to 70EC S= Sine Wave
C= -40 to 75EC
D= -55 to 90EC

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, (626) 443-2121, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
O-12
 TCXO THRU-HOLE
Temperature Compensated Crystal Oscillators

SPECIFICATION

Frequency Range 1MHz to 35MHz

Input Voltage 5.0±10%Vdc

Output Voltage >500Mv(rms) CMOS 5 TTL

Frequency Stability ±1ppm ~ ±10ppm

Temperature Range 0~+60EC -20~+70EC -40~+75EC

Output Load 270 Ohms/ 100pF 1K Ohms or 5TTL +15pF

Output Wave Sine CMOS & TTL

Harmonics & Subharmonics <-30 db

Input Current <10mA

Calibration Range >±5ppm

Dimensions in mm

TCXO Thru-Hole Part Number

TC1218T-A H- 12M800000 (Frequency)

A= 0 to 60EC H= CMOS & TTL

B= -20 to 70EC S= Sine Wave
C= -40 to 75EC

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, (626) 443-2121, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
O-13
 TCXO 7x9 SMD 4 PAD
Temperature Compensated Crystal Oscillators

SPECIFICATION

Frequency Range (MHz) 12.6, 12.8, 13.0, 14.4, 14.85, 15.36, 16.8, 19.2,
19.44, 19.68, 19.8

Input Voltage 3.0±5%Vdc

Max. Input Current 2mA @ 3Vdc, 25EC

Storage Temperature Range -40 ~ 85EC

Output Load [10k Ohms/10pF]±10%

Frequency Shift vs. Temperature ±2.5ppm (-20~+75EC)

vs. Supply Voltage ±0.3ppm (3V±5%)

vs. Load ±0.2ppm ([10k Ohms/10pF]±10%)

At Shipping ±2.5ppm @ 25±2EC)

vs. Aging ±1ppm per year

Voltage Controlled Range +9~+15ppm (1.5V±1V)

Dimensions in mm

TCXO 7x9 SMD 4 PAD Part Number

TC79-4- 12M800000 (Frequency)

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, (626) 443-2121, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
O-14
 TCXO & VTCXO 14 Pin Surface Mount

Temperature Compensated Crystal Oscillators Or With Voltage Control

SPECIFICATION

Output TTL/HCMOS Clipped Sinewave

Frequency Range 1.0 MHz to 35 MHz 9.6 MHz to 35 MHz

Frequency Stability Temperature See Table

Aging ±1.0ppm/year (25EC)

Supply Volt Change ±0.5ppm/(+5.0V ±5%)

Load ±0.3ppm

Input Voltage +5.0V ±5%

Max. Input Current 20mA 3mA

Storage Temperature Range -40 ~ 85EC

Output Max.. Load 10TTL or 15pF HCMOS 20K Ohms/ 5pF

Level High Min. TTL: 2.4Vdc, CMOS: Vdd-0.5 Vdc 1.0 Vp-p Min.

Level Low Max. TTL: 0.4Vdc, CMOS: 0.5Vdc

Frequency Tuning ±3.0ppm Min.

Control Voltage 2.5Vdc ± 2.0Vdc Positive Transfer Characteristic

Rise / Fall Time Max. 10n Sec. -

Duty Cycle Max. 50 ± 10% -

Operation Frequency Stibility (±PPM) *Denotes Availablity

Temperature
1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0

Range Code 15 20 25 30 35 40 45 50

0~50EC A ** ** ** ** ** ** ** **

-10~60EC B ** ** ** ** ** ** ** **

-10~70EC C ** ** ** ** ** ** ** **

-20~70EC D ** ** ** ** ** ** ** **

-30~60EC E ** ** ** ** ** ** **

-30~70EC F ** ** ** ** ** ** **

-30~70EC G ** ** ** ** ** **

-40~80EC H ** ** ** ** **

TCXO & VTCXO Full Size Surface Mount Part

TVCFS- 15 A T 5 -12M28800 (Frequency)

Frequency Stability Operating Temperature Output Frequency Deviation

Two Digit Code 1 Letter Code T= TTL Blank= Pin #1 Open (TCXO)
(See Table) (See Table) M= CMOS 5 = ±5ppm Min.
C= CMOS/ TTL Compatible 10 = ±10ppm Min.
S= Clipped Sinewave

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, (626) 443-2121, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
O-15
 VTCXO CLIPPED SINE WAVE SMD 4 PAD
Temperature Compensated Crystal Oscillators With Voltage Control

SPECIFICATION

Frequency Range 12.00 MHz to 19.200 MHz

Frequency Stability Temperature ±2.5ppm/-30EC to 75EC

Aging ±1.0ppm/year (25EC)

Supply Volt Change ±2.5ppm/(+3.0V ±5%)

Input Voltage 3.0Vdc

Max. Current Consumption 2mA

Storage Temperature Range -40 ~ 85EC

Output Load 10k Ohms/10pF

Voltage 1.0V p-p Min.

Waveform Clipped Sine Wave

Frequency Tuning ±3.0ppm Min.

Voltage Control Frequency Tuning Range ±4.0ppm Min.

Function
Control Voltage +1.5V±1.0Vdc

Dimensions in mm

VTCXO 9x11 SMD 4 PAD Part Number

VTC911-4- 12M800000 (Frequency)

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, (626) 443-2121, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
O-16
 VTCXO CLIPPED SINE WAVE SMD 6 PAD
Temperature Compensated Crystal Oscillators With Voltage Control

SPECIFICATION

Frequency Range 12.00 MHz to 19.200 MHz

Frequency Stability Temperature ±2.5ppm/-30EC to 75EC

Aging ±1.0ppm/year (25EC)

Supply Volt Change ±2.5ppm/(+3.0V ±5%)

Input Voltage 3.0Vdc

Max. Current Consumption 2mA

Storage Temperature Range -40 ~ 85EC

Output Load 10k Ohms/10pF

Voltage 1.0V p-p Min.

Waveform Clipped Sine Wave

Frequency Tuning ±3.0ppm Min.

Voltage Control Frequency Tuning Range ±4.0ppm Min.

Function
Control Voltage +1.5V±1.0Vdc

Dimensions in mm

VTCXO 9x11 SMD 6 PAD Part Number

VTC911-6- 12M800000 (Frequency)

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, (626) 443-2121, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
O-17
 VTCXO 3.2x5 SMD 4 PAD
Temperature Compensated Crystal Oscillators With Voltage Control

SPECIFICATION

Frequency Range (MHz) 12.6, 12.8, 13.0, 14.4, 14.85, 16.8, 19.2, 19.44,
19.68, 19.8

Input Voltage 3.0±5%Vdc

Max. Input Current 2mA @ 3Vdc, 25EC

Storage Temperature Range -40 ~ 85EC

Load [10k Ohms/10pF]±10%

Frequency Shift vs. Temperature ±2.5ppm (-20~+75EC)

vs. Supply Voltage ±0.2ppm (3V±5%)

vs. Load ±0.2ppm ([10k Ohms/10pF]±10%)

At Shipping ±0.5ppm @ 25±2EC)

vs. Aging ±1ppm per year

Output Level 0.8 Min.

Voltage Controlled Range +5~+15ppm (1.5V±1V)

Dimensions in mm

VTCXO 3.2x5 SMD 4 PAD Part Number

VTC35-4- 12M800000 (Frequency)

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, (626) 443-2121, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
O-18
 VTCXO 7x9 SMD 4 PAD
Temperature Compensated Crystal Oscillators With Voltage Control

SPECIFICATION

Frequency Range (MHz) 12.6, 12.8, 13.0, 14.4, 16.8, 19.2, 19.68

Input Voltage 3.0±5%Vdc

Output Voltage +1Vpp Min.

Frequency Stability/ Temperature ±2.5ppm/ -30~+80EC ±5ppm/ -30~+80EC

Power Source Variation ±0.3ppm Max./ +3V±5%

Output Load 10pF/ 10k Ohms

Power Consumption 1.5mA Max. (12.6 ~ 13.0MHz)

2.0mA Max. (14.4 ~ 19.68MHz)

AFC Control Voltage +1.5V±1.0V

Frequency Range Controlled by AFC ±5ppm~±12ppm Max.

Aging ±1ppm per year

Higher Harmonic -5dBm Max.

Dimensions in mm

VTCXO 7x9 SMD 4 PAD Part Number

2.5ppm Max.
VTC79-2.5- 12M800000 (Frequency)

5.0ppm Max.
VTC79-5- 12M800000 (Frequency)

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, (626) 443-2121, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
O-19
 VTCXO 3.5x6 SMD 4 PAD
Temperature Compensated Crystal Oscillators With Voltage Control

SPECIFICATION

Frequency Range (MHz) 12.6, 12.8, 13.0, 14.4, 16.8, 19.2, 19.68

Input Voltage 3.0±0.3Vdc

Output Voltage +0.9Vpp Min.

Frequency Stability/ Temperature ±2.5ppm/ -30~+80EC

Power Source Variation ±0.3ppm Max./ +3V±10%

Output Load 10pF/ 10k Ohms

Power Consumption 1.5mA Max. (12.6 ~ 13.0MHz)

2.0mA Max. (14.4 ~ 19.68MHz)

AFC Control Voltage +1.5V±1.0V

Frequency Range Controlled by AFC ±5ppm~±12ppm Max.

Aging ±1ppm per year

Higher Harmonic -10dBm Max.

Dimensions in mm

VTCXO 3.5x6 SMD 4 PAD Part Number

VTC36-4- 12M800000 (Frequency)

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, (626) 443-2121, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
O-20
 CRYSTAL PART NUMBER REFERENCE SHEET

X A A K 16M077600 F L E 18 A

Internal use
Frequency

M = MHz Temperature Range

Mode K = KHz
D = 0 to 50EC
A = Fund. E = 0 to 70EC
B = 3RD OT Tolerance @ 25EC F = -5 to 55EC
C = 5TH OT G = -10 to 60EC
D = 7TH OT A = ± 5PPM H = -20 to 70EC
E = 9TH OT B = ± 10PPM I = -25 to 85EC
C = ± 15PPM J = -40 to 85EC
D = ± 20PPM K = -55 to 105EC
Cut E = ± 25PPM L = -55 to 125EC
F = ± 30PPM X = Other
A = AT CUT G = ± 50PPM
B = BT CUT H = ±100PPM
X = Other Load Capacitance (CL)

Package 00 = Series
Stability XX = pF (Parallel)
A = HC6
B = HC12 D = ± 5PPM
C = HC50 F = ± 10PPM Options
D = UM-4 G = ± 15PPM
E = HC18 H = ± 20PPM A = Standard
F = HC33 I = ± 25PPM B = Top Wire
G = HC49USS J = ± 30PPM C = Gull Wing
H = UM-1/HC80 L = ± 50PPM D = Sleeve
I = HC49UPS N = ±100PPM E = Top Wire, Sleeve
J = HC48 X = Other F = Gull Wing, Sleeve
K = HC49 G = Mylar Spacers
L = HC49US H = Tape & Reel
M = HC51 X = Other
N = TO-5 Marking:
P = HC49UP
Q = UM-5/HC52
S = SMD 5X7 4 PAD
T = SMD 5X7 2 PAD
U = SMD 6X3 4 PAD
V = SMD 6X3 2 PAD
W = SMD 5X3 4 PAD
Y = SMD 5X3 2 PAD
Z = CYLINDRICAL
X = Other

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
STANDARD CRYSTAL CORP. CRYSTALS QUICK SELECTOR GUIDE

HC49U Dimensions mm/inch Mode/cut Holder Frequency Tol. @ 25EC Freq. Stability Temp. Range Load Cap. Options

11.0 x 4.8 x 13.5 AA=Fund. HC49U 1.8 to 125 F= ±30ppm L= ±50ppm E=0E to 70EC 00=Series A=Standard
BA=3rd OT MHz G=±50ppm N= ±100ppm J=-40E to 85EC 20=20pF B=Top Wire
0.43 x 0.19 x 0.53 CA=5th OT C=Gullwing

page C-1 Part Number AA K 20M00000 F L E 00 A

HC49US Dimensions mm/inch Mode/cut Holder Frequency Tol. @ 25EC Freq. Stability Temp. Range Load Cap. Options

11.4 x 5.0 x 4.0 AA=Fund. HC49 3.5 to 75 F= ±30ppm L= ±50ppm E=0E to 70EC 00=Series A=Standard
BA=3rd OT US MHz G=±50ppm N= ±100ppm J=-40E to 85EC 20=20pF
0.45 x 0.20 x 0.14

page C-2 Part Number AA L 20M00000 F L E 00 A

HC49USS Dimensions mm/inch Mode/cut Holder Frequency Tol. @ 25EC Freq. Stability Temp. Range Load Cap. Options

11.4 x 5.0 x 2.5 AA=Fund. HC49 3.5 to 75 F= ±30ppm L= ±50ppm E=0E to 70EC 00=Series A=Standard
BA=3rd OT USS MHz G=±50ppm N= ±100ppm J=-40E to 85EC 20=20pF
0.45 x 0.20 x 0.10

page C-2 Part Number AA G 20M00000 F L E 00 A

HC49UP Dimensions mm/inch Mode/cut Holder Frequency Tol. @ 25EC Freq. Stability Temp. Range Load Cap. Options

12.5 x 4.6 x 5.0 AA=Fund. HC49 3.5 to 75 F= ±30ppm L= ±50ppm E=0E to 70EC 00=Series A=Standard
BA=3rd OT UP MHz G=±50ppm N= ±100ppm J=-40E to 85EC 20=20pF H=Tape/ R.
0.49 x 0.18 x 0.19

page C-3 Part Number AA P 20M00000 F L E 00 H

HC49UPS Dimensions mm/inch Mode/cut Holder Frequency Tol. @ 25EC Freq. Stability Temp. Range Load Cap. Options

12.5 x 4.6 x 3.5 AA=Fund. HC49 3.5 to 75 F= ±30ppm L= ±50ppm E=0E to 70EC 00=Series A=Standard
BA=3rd OT UPS MHz G=±50ppm N= ±100ppm J=-40E to 85EC 20=20pF H=Tape/ R.
0.49 x 0.18 x 0.14

page C-3 Part Number AA I 20M00000 F L E 00 A

5 x 7 SMD Dimensions mm/inch Mode/cut Holder Frequency Tol. @ 25EC Freq. Stability Temp. Range Load Cap. Options

7.2 x 5.2 x 1.13 AA=Fund. 5x7 10 to 85 F= ±30ppm L= ±50ppm E=0E to 70EC 00=Series A=Standard
BA=3rd OT 4 pad MHz G=±50ppm N= ±100ppm J=-40E to 85EC 20=20pF H=Tape/ R.
0.28 x 0.21 x 0.05

page C-4 Part Number AA S 20M00000 F L E 00 H

5 x 7 SMD Dimensions mm/inch Mode/cut Holder Frequency Tol. @ 25EC Freq. Stability Temp. Range Load Cap. Options

7.2 x 5.2 x 1.13 AA=Fund. 5x7 10 to 85 F= ±30ppm L= ±50ppm E=0E to 70EC 00=Series A=Standard
BA=3rd OT 2 pad MHz G=±50ppm N= ±100ppm J=-40E to 85EC 20=20pF H=Tape/ R.
0.28 x 0.21 x 0.05

page C-4 Part Number AA T 20M00000 F L E 00 H

6 x 3.5 SMD Dimensions mm/inch Mode/cut Holder Frequency Tol. @ 25EC Freq. Stability Temp. Range Load Cap. Options

6.0 x 3.5 x 1.12 AA=Fund. 6 x 3.5 16 to 85 F= ±30ppm L= ±50ppm E=0E to 70EC 00=Series A=Standard
BA=3rd OT 4 pad MHz G=±50ppm N= ±100ppm J=-40E to 85EC 20=20pF H=Tape/ R.
0.24 x 0.14 x 0.05

page C-5 Part Number AA U 20M00000 F L E 00 H

6 x 3.5 SMD Dimensions mm/inch Mode/cut Holder Frequency Tol. @ 25EC Freq. Stability Temp. Range Load Cap. Options

6.0 x 0.35 x 1.12 AA=Fund. 6 x 3.5 16 to 85 F= ±30ppm L= ±50ppm E=0E to 70EC 00=Series A=Standard
BA=3rd OT 2 pad MHz G=±50ppm N= ±100ppm J=-40E to 85EC 20=20pF H=Tape/ R.
0.24 x 0.14 x 0.05
page C-5
Part Number AA V 20M00000 F L E 00 H
A-4
STANDARD CRYSTAL CORP. CRYSTALS QUICK SELECTOR GUIDE
5 x 3.2 SMD Dimensions mm/inch Mode/cut Holder Frequency Tol. @ 25EC Freq. Stability Temp. Range Load Cap. Options

5.0 x 3.2 x 1.0 AA=Fund. 5 x 3.2 10 to 45 F= ±30ppm L= ±50ppm E=0E to 70EC 00=Series A=Standard
4 pad MHz G=±50ppm N= ±100ppm 20=20pF H= Tape/ R.
0.20 x 0.13 x 0.04

page C-6 Part Number AA W 20M00000 F L E 00 H

5 x 3.2 SMD Dimensions mm/inch Mode/cut Holder Frequency Tol. @ 25EC Freq. Stability Temp. Range Load Cap. Options

5.0 x 3.2 x 1.0 AA=Fund. 5 x 3.3 10 to 45 F= ±30ppm L= ±50ppm E=0E to 70EC 00=Series A=Standard
2 pad MHz G=±50ppm N= ±100ppm 20=20pF H=Tape/ R.
0.20 x 0.13 x 0.04

page C-6 Part Number AA Y 20M00000 F L E 00 H

UM-1 (HC80) Dimensions mm/inch Mode/cut Holder Frequency Tol. @ 25EC Freq. Stability Temp. Range Load Cap. Options

7.7 x 3.0 x 8.6 AA=Fund. UM-1 10 to 150 F= ±30ppm L= ±50ppm E=0E to 70EC 00=Series A=Standard
BA=3rd OT MHz G=±50ppm N= ±100ppm J=-40E to 85EC 20=20pF B=Top Wire
0.31 x 0.12 x 0.34

page C-7 Part Number AA H 20M00000 F L E 00 A

UM-5 (HC52) Dimensions mm/inch Mode/cut Holder Frequency Tol. @ 25EC Freq. Stability Temp. Range Load Cap. Options

7.7 x 3.0 x 5.8 AA=Fund. UM-5 15 to 150 F= ±30ppm L= ±50ppm E=0E to 70EC 00=Series A=Standard
BA=3rd OT MHz G=±50ppm N= ±100ppm J=-40E to 85EC 20=20pF
0.31 x 0.12 x 0.23

page C-8 Part Number AA Q 20M00000 F L E 00 A

UM-4 Dimensions mm/inch Mode/cut Holder Frequency Tol. @ 25EC Freq. Stability Temp. Range Load Cap. Options

7.7 x 3.0 x 4.5 AA=Fund. UM-4 20 to 150 F= ±30ppm L= ±50ppm E=0E to 70EC 00=Series A=Standard
BA=3rd OT MHz G=±50ppm N= ±100ppm J=-40E to 85EC 20=20pF
0.31 x 0.12 x 0.18

Page C-9 Part Number AA D 20M00000 F L E 00 A

TO-5 Dimensions mm/inch Mode/cut Holder Frequency Tol. @ 25EC Freq. Stability Temp. Range Load Cap. Options

i9.6 x i6.7 AA=Fund. TO-5 5 to 150 F= ±30ppm L= ±50ppm E=0E to 70EC 00=Series A=Standard
BA=3rd OT MHz G=±50ppm N= ±100ppm J=-40E to 85EC 20=20pF
i0.378 x i0.265
page C-10 Part Number AA N 20M00000 F L E 00 A

HC51 Dimensions mm/inch Mode/cut Holder Frequency Tol. @ 25EC Freq. Stability Temp. Range Load Cap. Options

19.2 x 8.9 x 19.7 AA=Fund. HC51 1.0 to 20.0 F= ±30ppm L= ±50ppm E=0E to 70EC 00=Series A=Standard
BA=3rd OT MHz G=±50ppm N= ±100ppm J=-40E to 85EC 20=20pF B=Top Wire
0.76 x 0.35 x 0.78 C=Gullwing

page C-11 Part Number AA M 20M00000 F L E 00 A

HC6 (pin) Dimensions mm/inch Mode/cut Holder Frequency Tol. @ 25EC Freq. Stability Temp. Range Load Cap. Options

19.2 x 8.9 x 19.7 AA=Fund. HC6 1.0 to 20.0 F= ±30ppm L= ±50ppm E=0E to 70EC 00=Series A=Standard
BA=3rd OT MHz G=±50ppm N= ±100ppm J=-40E to 85EC 20=20pF
0.76 x 0.35 x 0.78

page C-11 Part Number AA A 20M00000 F L E 00 A

3x9 Dimensions mm/inch Mode/cut Holder Frequency Tol. @ 25EC Freq. Stability Temp. Range Load Cap. Options
Cylindrical
i9.3 x i3.1 AA=Fund. 3x9 3.5 to 60.0 F= ±30ppm L= ±50ppm E=0E to 70EC 00=Series A=Standard
BA=3rd OT MHz G=±50ppm N= ±100ppm J=-40E to 85EC 20=20pF
i0.37 x i0.12
page C-12 Part Number AA Z 20M00000 F L E 00 A
A-5
 CRYSTAL REQUEST FOR QUOTE SHEET

Your Company Name: _________________________________________________

Your Name: _________________________, Phone :_________________________

Fax: _______________________________, E-Mail: __________________________

Address: ____________________________________________________________

Quantity: ___________________________, Delivery: _________________________

Part Number: _________________________ Example: AAK20M000000FLE20A

Package Type: _______________________ (HC49U, UM-1, 5x7 SMD 4 Pad, Etc.)

Frequency: ___________________________ MHz or KHz

Frequency Tolerance: ±__________________ PPM @ 25EC

Frequency Stability: ±__________________ PPM @ Operating Temperature Range

Operating Temperature Range: from_________EC to _________EC

Mode of Operation: ____________________ (Fundamental, 3rd Overtone, Etc.)

Load Capacitance (CL): Parallel________pF or ____Series

Resistance: ________________________ Ohms

C0 (Shunt): ________________________ pF

C1 ( Motional): _____________________ pF

Options: Top Wire_____, Gull Wing_____, Sleeve_____, Insulator_____, T&R_____.

Special Instructions: ___________________________________________________

____________________________________________________________________

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
 CUSTOM MADE CRYSTALS

Specifications Package Styles

Frequency Tolerance @ 25EC±2EC 10 to 100PPM Seal Lead Type Large Standard Miniature

Operating Temperature Ranges -10EC to 60EC Resistance Wire HC51U HC49U UM-1
-20EC to 70EC Weld
-30EC to 80EC Pin HC48U HC50U --------
-40EC to 85EC
-55EC to 105EC Solder Wire HC33U HC18U --------
Seal
Freq. Stability Over Temperature 10 to 100PPM Pin HC6U HC25U --------
Range
Oscillation Fundamental 1.00-4.8 MHz 1.8-30MHz 2-30MHz
Load Capacitance (TYP) 12pF to 50pF & Mode
Series Overtone N/A 20-200 MHz 25-200 MHz

Aging Rate per Year 1 to 7PPM

Drive Level 0.1mW (TYP)

STANDARD FREQUENCIES AVAILABLE IN HC49/U PACKAGE

Frequency Tolerance @ 25EC ± 30PPM, Temperature Stability 0 to 70EC ± 50PPM
FREQ. (MHz) CL (pF) ESR (Ohms) FREQ. (MHz) CL (pF) ESR (Ohms) FREQ. (MHz) CL (pF) ESR (Ohms)

3.000000 32 200 7.372800 20 40 14.318180 Series 25

3.275800 18 120 8.000000 Series 35 14.318180 20 25

3.579545 18 120 8.000000 20 35 14.745600 20 25

3.686400 Series 120 8.192000 Series 35 15.000000 Series 25

3.686400 20 120 8.192000 20 35 15.000000 20 25

4.000000 Series 100 9.2160000 Series 35 16.000000 Series 25

4.000000 20 100 9.600000 Series 35 16.000000 20 25

4.096000 Series 100 9.600000 20 35 17.734475 20 25

4.194304 12 100 9.830400 Series 35 18.000000 Series 20

4.433619 20 70 9.830400 20 35 18.432000 Series 20

4.915200 Series 55 10.000000 Series 30 18.432000 20 20

4.915200 20 55 10.000000 20 30 19.660800 Series 20

5.000000 20 50 11.000000 Series 30 19.660800 20 20

5.068800 Series 50 11.000000 20 30 20.000000 Series 20

5.068800 20 50 11.059200 Series 30 20.000000 20 20

5.185000 20 50 11.059200 20 30 22.118400 Series 20

5.990400 Series 40 12.000000 Series 30 21.118400 20 20

6.000000 Series 40 12.000000 20 30 24.000000 Series 20

6.000000 20 40 12.288000 Series 30 24.000000 20 20

6.144000 20 40 12.288000 20 30 28.000000 Series 20

6.553600 20 40 13.516800 Series 25 28.000000 20 20

7.372800 Series 40
For unlisted frequencies or different specifications contact the factory
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
 HC49U
MICROPROCESSOR CRYSTALS / RESISTANCE WELD

SPECIFICATION
Frequency Range 1.8432 to 180.00MHz
Frequency Tolerance ± 50 PPM ( Standard )
Frequency Stability ± 100 PPM ( Standard )
Operating Temperature Range 0EC to 70EC ( Standard )
Load Capacitance ( CL ) 12pF to 50pF & Series
Shunt Capacitance 7pF Maximum
Drive Lavel 1mWatt Maximum
Aging ±5 PPM per year Maximum

Dimensions in In (mm)

HC49U Part Number Break Down

AA K 20M000000 F L E 18 A
(Frequency) CL

MODE TOLERANCE STABILITY TEMP. RANGE OPTIONS

AA= Fundamental B= ±10 PPM H= ±20 PPM E= 0 to 70EC A= Standard
BA= 3rd Overtone D= ±20 PPM J= ±30 PPM H= -20 to 70EC B= Top Wire
CA= 5th Overtone F= ±30 PPM L= ±50 PPM J= -40 to 85EC C= Gull Wing
DA= 7th Overtone G= ±50 PPM N= ±100 PPM D= Sleeve
H= ±100 PPM

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
C-1
 HC49US Low Profile
MICROPROCESSOR CRYSTALS / RESISTANCE WELD

SPECIFICATION
Frequency Range 3.579545 to 60.000 MHz
Frequency Tolerance ± 50 PPM ( Standard )
Frequency Stability @ 25EC ± 50 PPM ( Standard )
Operating Temperature Range 0EC to 70EC ( Standard )
Load Capacitance ( CL ) 12pF to 50pF or Series
Shunt Capacitance 7pF Maximum
Drive Lavel 1mWatt Maximum
Aging ±5 PPM per year Maximum

Dimensions in mm

HC49US Part Number Break Down

AA L 20M000000 F L E 18 H
(Frequency) CL

MODE HOLDER TOLERANCE STABILITY TEMP. RANGE OPTIONS

AA= Fundamental G = 2.8 H B= ±10 PPM H= ±20 PPM E= 0 to 70EC A= Standard
BA= 3rd Overtone L = 4.0 H D= ±20 PPM J = ±30 PPM H= -20 to 70EC
F= ±30 PPM L= ±50 PPM J= -40 to 85EC
G= ±50 PPM N= ±100 PPM
H= ±100 PPM

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
C-2
 HC49UP Low Profile Surface Mount
MICROPROCESSOR CRYSTALS / RESISTANCE WELD

SPECIFICATION
Frequency Range 3.579545 to 60.000 MHz
Frequency Tolerance ± 50 PPM ( Standard )
Frequency Stability @ 25EC ± 50 PPM ( Standard )
Operating Temperature Range 0EC to 70EC ( Standard )
Load Capacitance ( CL ) 12pF to 50pF or Series
Shunt Capacitance 7pF Maximum
Drive Lavel 1mWatt Maximum
Aging ±5 PPM per year Maximum

Dimensions in mm

Recommended Pad Layout

HC49UP Part Number Break Down

AA P 20M000000 F L E 18 H
(Frequency) CL

MODE HOLDER TOLERANCE STABILITY TEMP. RANGE OPTIONS

AA= Fundamental I = 3.5 H B= ±10 PPM H= ±20 PPM E= 0 to 70EC A= Standard
BA= 3rd Overtone P = 5.0 H D= ±20 PPM J = ±30 PPM H= -20 to 70EC H= Tape & Reel
F= ±30 PPM L= ±50 PPM J= -40 to 85EC
G= ±50 PPM N= ±100 PPM
H= ±100 PPM

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
C-3
 5x7 CRYSTAL MINIATURE SMD
MICROPROCESSOR CRYSTAL

SPECIFICATION
Frequency Range 10 to 100 MHz
Frequency Tolerance ± 50 PPM (Standard)
Frequency Stability ± 50 PPM ( Standard )
Operating Temperature Range 0EC to 70EC ( Standard )
Load Capacitance ( CL ) 12pF to 50pF & Series
Shunt Capacitance 7pF Maximum
Drive Lavel 100uWatt Maximum
Aging ±3 PPM per year Maximum

Dimensions in mm

S - 4 PAD Pad
Layout T - 2 PAD Pad Layout

5 x 7 MINI. SMD CRYSTAL Part Number Break Down

AA S 20M000000 F L E 18 H
(Frequency) CL

MODE HOLDER TOLERANCE STABILITY TEMP. RANGE OPTIONS

AA= Fundamental S = 4 Pad D= ±20 PPM H= ±20 PPM E= 0 to 70EC A= Standard
BA= 3rd Overtone T = 2 Pad F= ±30 PPM J= ±30 PPM H= -20 to 70EC H= Tape & Reel
G= ±50 PPM L= ±50 PPM J= -40 to 85EC
H= ±100 PPM N= ±100 PPM

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
C-4
 6x3 CRYSTAL MINIATURE SMD
MICROPROCESSOR CRYSTAL

SPECIFICATION
Frequency Range 12 to 100 MHz
Frequency Tolerance ± 50 PPM (Standard)
Frequency Stability ± 50 PPM ( Standard )
Operating Temperature Range 0EC to 70EC ( Standard )
Load Capacitance ( CL ) 12pF to 50pF & Series
Shunt Capacitance 7pF Maximum
Drive Lavel 100uWatt Maximum
Aging ±3 PPM per year Maximum

Dimensions in mm

U - 4 PAD Pad Layout V - 2 PAD Pad

Layout

6X3 MINI. SMD CRYSTAL Part Number Break Down

AA U 20M000000 F L E 18 H
(Frequency) CL

MODE HOLDER TOLERANCE STABILITY TEMP. RANGE OPTIONS

AA= Fundamental U = 4 Pad D= ±20 PPM H= ±20 PPM E= 0 to 70EC A= Standard
BA= 3rd Overtone V = 2 Pad F= ±30 PPM J= ±30 PPM H= -20 to 70EC H= Tape & Reel
G= ±50 PPM L= ±50 PPM J= -40 to 85EC
H= ±100 PPM N= ±100 PPM

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
C-5
 5x3 CRYSTAL MINIATURE SMD
MICROPROCESSOR CRYSTAL

SPECIFICATION
Frequency Range 10 to 45 MHz (Fundamental)
Frequency Tolerance ± 50 PPM (Standard)
Frequency Stability ± 50 PPM ( Standard )
Operating Temperature Range 0EC to 70EC ( Standard )
Load Capacitance ( CL ) 12pF to 50pF & Series
Shunt Capacitance 7pF Maximum
Drive Lavel 100uWatt Maximum
Aging ±3 PPM per year Maximum

Dimensions in mm

W - 4 PAD Pad Layout Y - 2 PAD Pad Layout

5 x 3 MINI. SMD CRYSTAL Part Number Break Down

AA W 20M000000 F L E 18 H
(Frequency) CL

MODE HOLDER TOLERANCE STABILITY TEMP. RANGE OPTIONS

AA= Fundamental W = 4 Pad F= ±30 PPM J= ±30 PPM E= 0 to 70EC A= Standard
Y = 2 Pad G= ±50 PPM L= ±50 PPM H= Tape & Reel
H= ±100 PPM N= ±100 PPM

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
C-6
 UM-1 (HC80)
MICROPROCESSOR CRYSTALS / RESISTANCE WELD

SPECIFICATION
Frequency Range 10 to 150.00MHz
Frequency Tolerance ± 50 PPM ( Standard )
Frequency Stability ± 50 PPM ( Standard )
Operating Temperature Range 0EC to 70EC ( Standard )
Load Capacitance ( CL ) 12pF to 50pF & Series
Shunt Capacitance 7pF Maximum
Drive Lavel 1mWatt Maximum
Aging ±5 PPM per year Maximum

Dimensions in In (mm)

UM-1 Part Number Break Down

AA H 20M000000 F L E 18 A
(Frequency) CL

MODE TOLERANCE STABILITY TEMP. RANGE OPTIONS

AA= Fundamental B= ±10 PPM H= ±20 PPM E= 0 to 70EC A= Standard
BA= 3rd Overtone D= ±20 PPM J= ±30 PPM H= -20 to 70EC B= Top Wire
CA= 5th Overtone F= ±30 PPM L= ±50 PPM J= -40 to 85EC C= Gull Wing
G= ±50 PPM N= ±100 PPM
H= ±100 PPM

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
C-7
 UM-5 (HC52)
MICROPROCESSOR CRYSTALS / RESISTANCE WELD

SPECIFICATION
Frequency Range 10 to 150.00MHz
Frequency Tolerance ± 50 PPM ( Standard )
Frequency Stability ± 50 PPM ( Standard )
Operating Temperature Range 0EC to 70EC ( Standard )
Load Capacitance ( CL ) 12pF to 50pF & Series
Shunt Capacitance 7pF Maximum
Drive Lavel 1mWatt Maximum
Aging ±5 PPM per year Maximum

Dimensions in In (mm)

UM-5 Part Number Break Down

AA Q 20M000000 F L E 18 A
(Frequency) CL

MODE TOLERANCE STABILITY TEMP. RANGE OPTIONS

AA= Fundamental B= ±10 PPM H= ±20 PPM E= 0 to 70EC A= Standard
BA= 3rd Overtone D= ±20 PPM J= ±30 PPM H= -20 to 70EC
CA= 5th Overtone F= ±30 PPM L= ±50 PPM J= -40 to 85EC
G= ±50 PPM N= ±100 PPM
H= ±100 PPM

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
C-8
 UM-4
MICROPROCESSOR CRYSTALS / RESISTANCE WELD

SPECIFICATION
Frequency Range 10 to 150.00MHz
Frequency Tolerance ± 50 PPM ( Standard )
Frequency Stability ± 50 PPM ( Standard )
Operating Temperature Range 0EC to 70EC ( Standard )
Load Capacitance ( CL ) 12pF to 50pF & Series
Shunt Capacitance 7pF Maximum
Drive Lavel 1mWatt Maximum
Aging ±5 PPM per year Maximum

Dimensions in In (mm)

UM-4 Part Number Break Down

AA D 20M000000 F L E 18 A
(Frequency) CL

MODE TOLERANCE STABILITY TEMP. RANGE OPTIONS

AA= Fundamental B= ±10 PPM H= ±20 PPM E= 0 to 70EC A= Standard
BA= 3rd Overtone D= ±20 PPM J= ±30 PPM H= -20 to 70EC
CA= 5th Overtone F= ±30 PPM L= ±50 PPM J= -40 to 85EC
G= ±50 PPM N= ±100 PPM
H= ±100 PPM

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
C-9
 TO-5
MICROPROCESSOR CRYSTALS / RESISTANCE WELD

SPECIFICATION
Frequency Range 5 to 150.00MHz
Frequency Tolerance ± 50 PPM ( Standard )
Frequency Stability ± 100 PPM ( Standard )
Operating Temperature Range 0EC to 70EC ( Standard )
Load Capacitance ( CL ) 12pF to 50pF & Series
Shunt Capacitance 7pF Maximum
Drive Lavel 1mWatt Maximum
Aging ±5 PPM per year Maximum

Dimensions in In (mm)

TO-5 Part Number Break Down

AA N 20M000000 F L E 18 A
(Frequency) CL

MODE TOLERANCE STABILITY TEMP. RANGE OPTIONS

AA= Fundamental D= ±20 PPM H= ±20 PPM E= 0 to 70EC A= Standard
BA= 3rd Overtone F= ±30 PPM J= ±30 PPM J= -40 to 85EC
CA= 5th Overtone G= ±50 PPM L= ±50 PPM
DA= 7th Overtone H= ±100 PPM N= ±100 PPM

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
C-10
 HC51 / HC6
RESISTANCE WELD

SPECIFICATION
Frequency Range 1.0 to 20.000 MHz
Frequency Tolerance ± 50 PPM ( Standard )
Frequency Stability @ 25EC ± 50 PPM ( Standard )
Operating Temperature Range 0EC to 70EC ( Standard )
Load Capacitance ( CL ) 12pF to 50pF or Series
Shunt Capacitance 7pF Maximum
Drive Lavel 1mWatt Maximum
Aging ±5 PPM per year Maximum

Dimensions in mm

HC51 / HC6 Part Number Break Down

AA M 20M000000 F L E 18 A
(Frequency) CL

MODE HOLDER TOLERANCE STABILITY TEMP. RANGE OPTIONS

AA= Fundamental M = HC51 D= ±20 PPM H= ±20 PPM E= 0 to 70EC A= Standard
A = HC6 F= ±30 PPM J = ±30 PPM J= -40 to 85EC B= Top Wire
G= ±50 PPM L= ±50 PPM (HC51 Only)
H= ±100 PPM N= ±100 PPM

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
C-11
 3x9 Cylindrical Crystal

SPECIFICATION
Frequency Range 3.579 to 60.00MHz
Frequency Tolerance ± 50 PPM ( Standard )
Frequency Stability ± 100 PPM ( Standard )
Operating Temperature Range 0EC to 70EC ( Standard )
Load Capacitance ( CL ) 12pF to 50pF & Series
Shunt Capacitance 7pF Maximum
Drive Lavel 1mWatt Maximum
Aging ±5 PPM per year Maximum

Dimensions in In (mm)

3x9 Cylindrical Crystal Part Number Break Down

AA Z 20M000000 F L E 18 A
(Frequency) CL

MODE TOLERANCE STABILITY TEMP. RANGE OPTIONS

AA= Fundamental D= ±20 PPM H= ±20 PPM E= 0 to 70EC A= Standard
BA= 3rd Overtone F= ±30 PPM J= ±30 PPM J= -40 to 85EC
G= ±50 PPM L= ±50 PPM
H= ±100 PPM N= ±100 PPM

Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731

Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
C-12