Products
Introduction
oe BAI YUN® SS511B Silicone Weather Proofing Sealant
Features
a Extension/compression movement capability of
Up to 435% of the original joint width
‘= Suits applications in the areas with large differ-
ence in temperature and low humidity
a Nounpleasant odor during curing
Non-corrosive curing system
Excellent weather ability and high resistance to
ultraviolet radiation, heat and humidity, ozone
and temperature extremes
a Remains flexible over a temperature range of
-$8°F|-50°C] to 302°F (150°C)
‘= Excellent unprimed adhesion to wide range of
substrates including coated, enameled and
reflective glasses, anodized and polyester
coated or painted aluminum profiles
Good compatibility with other neutral silicone
sealants
Composition
= One-part, neutral-curing
= RTVsilicone sealant
Application
= Weather sealing in glass curtain wal joints
= Weather sealing in metal, enamel curtain wall
Joints
‘Sealing in expansion joints for concrete, plastic
and metal ete
= Sealing in roof joints
Many other uses
‘Typical Properties
Property —_|__ Re Test method
UneredAs Tested ot 23°F and 0% RH
Working ie
casey sonny | 1020rinnes
Teattes tine | cominaee | ASTICSTO
esr SOR)
airtime
724
ect e
fiow Sgorsionp | —=Oiirm | AST CE
YO content| ~3oq/t
‘sarees 2 dys a 2507 and 5 RA
vondnesssroen | 8 | ASCE
Peelsrerets | 258/m | ASTMCTBH
Taine Movement | — ae cous
‘nsbity
Tense ahesonSeegth
ATSO%eension | 0463MPs | _ASTW CIE
Speciations:Typeal property data values shoul not be
ed as specications. Assistance with specteations are
_avalale by contacting Guangzhou Sayun Chemical
Indust €0, 0.
Specifications
ASTM C920; Type 5, Grade NS, Class 35, Use NT, A,
Go
Colors
Black, gray and white (standard colors)
Other wide variety of colors (customized)
Package
500 ml sausage
Storage and shelf life
12 months from the date of manufacture when
stored at or below 272C (802F) in the original
Unopened containers.Product limitation
This product should not be used, applied or recom:
mended:
In structural glazing applications or where the
sealant is intended as an adhesive.
= In areas where abrasion and physical abuse are
encountered.
= In totally confined spaces as the sealant requires
atmospheric moisture for cure.
= On frostladen or damp surfaces
m= To building materials that bleed oils, plasticizers
‘or solvents ~ materials such as impregnated
‘wood, oil-based caulks, green or partially vulca~
nized rubber gaskets or tapes.
= On PMMA, PC substrates
In below-grade applications
On substrates made of polypropylene, polyeth-
ylene, polycarbonate and poly tetrafluoroeth-
ylene.
| Where movement capability greater than 435%
is required,
|= Where painting of the sealant is required, as the
paint film may crack and peel
= Forstructural adhesion on bare metals or surfac-
es subject to corrosion (ie, mill aluminum, bare
steel, etc)
‘To surfaces in contact with food
™ For use underwater or in other applications
Handling and Safety
Product safety information required for safe use is
not included in this document. Before handling, read
product and material safety data sheets and contain-
er labels for safe use, physical and health hazard
information. The material safety data sheet is
available from baiyun sales application engineer, or
distributor, or by calling baiyun customer service.
Products
Introduction
How to use
Complete design and installation guidelines are
contained in the BAIYUN Technical Manual when
Using this product.
Health and environment information
For information and advice regarding transportation,
handling, storage and disposal of chemical products,
Users should refer to the actual Material Safety Data
Sheets containing physical, ecological toxicological
and other safety-related data.