Scribd
Upload
1K views1 page

M-25 Mix Design

This document provides a concrete mix design for M25 grade concrete to be used in a RCC project. The mix uses a maximum aggregate size of 20mm and has a specified slump of 100mm. The mix proportions are 1 part cement, 2.71 parts fine aggregate, and 3.33 parts coarse aggregate by weight. Laboratory testing of sample cubes will be conducted to verify the mix meets strength and workability requirements.

Uploaded by

Røshän Kumar Patel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views1 page

M-25 Mix Design

This document provides a concrete mix design for M25 grade concrete to be used in a RCC project. The mix uses a maximum aggregate size of 20mm and has a specified slump of 100mm. The mix proportions are 1 part cement, 2.71 parts fine aggregate, and 3.33 parts coarse aggregate by weight. Laboratory testing of sample cubes will be conducted to verify the mix meets strength and workability requirements.

Uploaded by

Røshän Kumar Patel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

CONCRETE MIX DESIGN

DATE: 4/17/2023
NAME OF ORGNISATION: Buddha RMC
PROJECT NAME: Mix design of M25
LOCATION: 0

GRADE OF CONCRETE : M25 TYPE OF CONCRETE: RCC


MAXIMUM SIZE OF AGGREGATE: 20mm CONFIRMS TO: IS10262
SLUMP (mm) : 100 METHODE OF PLACEMENT: PUMP
BASIC DATA
SPECIFIC
INGREDIENTS TYPE SOURCE PERCENTAGE(%)
GRAVITY
CEMENT OPC 43 Cement 3.15
COARSE 20mm 2.7 75%
Crusher
AGGREGATES 10mm 2.7 25%
FINE AGGREGATES ZONE I River 2.69 100%
MINERAL NA 1
CHECMICAL Platicizer SILICON-350 1.09 0.6%

INGREDIENTS REQUIRED PER CUM OF CONCRETE

CEMENT CONTENT: 330 Kg


COARSE AGGREGATE 20MM 824 Kg
COARSE AGGREGATE 10MM 275 Kg
FINE AGGREGATE : 896 Kg
ADMIXTURE: 1.98 Kg
TOTAL WATER: 145 Liters
DESIGN DENSITY: 2472 Kg/Cum

MIX PROPORTION BY WEIGHT


CEMENTITIOUS FINE AGGREGATES COARSE AGGREGATES
1 2.71 3.33

Required WATER / CEMENT RATIO 0.44

Mix Trial for Laboratary

S.N ITEM DESCRIPTION QUANTITY UNITS


1 Numbers of cubes 6
2 Dimension of cube 150X150X150
3 surface area of cube(mm2) 22500
4 Volum of cube(m3) 0.00338
5 Numbers of sample + westage 0.025
6 Cement content 8.250 Kg
7 Fine Aggregete 22.396 Kg
8 20mm Aggregate 20.606 Kg
9 10mm Aggregete 6.869 Kg
10 Water content 3.630 Ltr
11 Admixture 0.0495 Kg

DESIGN BY
ER.ROSHAN KUMAR PATEL

You might also like