Model Questionpaper - Paper2
Model Questionpaper - Paper2
18EC81
OR
(c)The RMS voltage applied to the receiver input assuming that the receiver antenna
2 (a) has a purely real impedance of 50 ohm and is matched to the receiver. 8
What are the techniques used for mitigating broad band fading? Explain
(b) 6
Explain the concept of scattering used in mobile radio propagation-large scale path
(c) loss 6
Module 2
(b) Classify and name GSM logical channels and explain their major functions 6
What are GSM identities and explain GSM call setup operation using the MSRS with a
neat diagram.
(c) 6
1 Dr. Asha K & Prof. Prabha K, Dept. of ECE, Sai Vidya Institute of Technology
Wireless & Cellular Communication(18EC81) Model Question paper 2022
OR
With neat GSM network architecture, explain the Network switching system (NSS).
(b) 10
Module 3
5 (a) Explain Network interfaces for CDMA systems, with neat diagram 10
(b) 6
Explain the generation of CDMA paging channel
(c) Explain CDMA mobile station initialization. State with neat block diagram 4
OR
6 (a) Explain elements of the CDMA 2000 packet core network, with neat diagram 10
(b) With the neat block diagram, explain the generation of CDMA forward traffic channel. 10
7 (a) 8
Discuss the key enabling technologies used in LTE design
Write the block diagram, Explain LTE Network Architecture and describe briefly the
(b) new elements provided in it 6
(c) Discuss the OFDM baseband to pass band transmitter used in LTE. 6
OR
(b) 7
What is PAR problem? Explain the methods used for PAR reduction
2 Dr. Asha K & Prof. Prabha K, Dept. of ECE, Sai Vidya Institute of Technology
Wireless & Cellular Communication(18EC81) Model Question paper 2022
Module 5
9 (a) 7
Discuss the different types of access techniques used in OFDM system with neat
block diagram.
(c ) Explain the Multi-user diversity and opportunistic scheduling approaches for OFDMA. 6
OR
10 (a) Explain the principle of operation of OFDMA downlink transmitter with neat sketch 6
Write the Frame structure Type 1 and explain the various fields applications to TDD
(b) mode. 6
(c) Discuss the basic design principles while designing the LTE specifications 8
3 Dr. Asha K & Prof. Prabha K, Dept. of ECE, Sai Vidya Institute of Technology