10.

SYLLABUS CONTENT WITH TIME STRUCTURE

10.1 SYLLABUS CONTENT FOR PROFESSIONAL SKILL & KNOWLEDGE

First Semester
(Semester Code no. ELE - 01)
Duration: Six Month

LEARNING OBJECTIVES OF 1ST SEMESTER

1. Apply safe working practices.

2. Comply environment regulation and housekeeping
3. Interpret & use Company terminology and technical communication
4. To make simple wiring circuit with common electrical accessories with domestic electrical
appliances for a specified voltage and current.
5. To carry out the necessary test for charging secondary battery individually, installation and
grouping of batteries, care and maintenance of batteries.
6. To make a job profile according to the drawing.
7. Able to carry out earthing installation.

Week Professional Skills Professional Knowledge

No.
Trade Practical Trade Theory
1 Implementation in the shop Occupational Safety & Health
floor of the various safety Basic safety introduction,
measures. Visit to the different Personal protection:-
sections of the Institute Basic injury prevention, Basic first aid, Hazard
Demonstration on elementary identification and avoidance, safety signs for
first aid. Artificial Respiration. Danger, Warning, caution & personal safety
Practice on use of fire message.
extinguishers. Use of Fire extinguishers.
Occupational Safety & Health Visit & observation of sections.
Importance of housekeeping & Various safety measures involved in the Industry.
good shop floor practices. Elementary first Aid. Concept of Standard
Health, Safety and Soft Skills: its importance and Job area after
Environment guidelines, completion of training.Introduction of First aid.
legislations & regulations as Operation of electrical mains. Introduction of PPEs.
applicable. Disposal procedure Introduction to 5S concept & its application.
of waste materials like cotton Response to emergencies eg; power failure, fire, and
waste, metal chips/burrs etc. system failure.
Basic safety introduction,
Personal protective
23

Electrician Syllabus 1
 Equipment(PPE):-
Basic injury prevention, Basic
first aid, Hazard identification
and avoidance, safety signs for
Danger, Warning, caution &
personal safety message.
Preventive measures for
electrical accidents & steps to
be taken in such accidents.
Use of Fire extinguishers.
2 Demonstration of Trade hand Identification of Trade-Hand tools-Specifications
tools. Identification of simple
types- screws, nuts & bolts,
chassis, clamps, rivets etc. Use,
care & maintenance of various
hand tools. Familiarization
with signs and symbols of
Electrical accessories
3-4 Practice in using cutting pliers, Fundamental of electricity. Electron theory- free
screw drivers etc. skinning the electron, Fundamental terms, definitions, units &
cables, and joint practice on effects of electric current
single strand.
Demonstration & Practice on
bare conductors joints--such as
rat tail, Britannia, straight, Tee,
Western union. Joints
5 Practice in soldering & Solders, flux and soldering technique. Resistors
brazing- Measurement of types of resistors & properties of resistors.
Resistant and Measurement of
specific Resistant. Application
of Wheatstone bridge in
measurement of Resistance
6 Demonstration and Introduction of National Electrical Code 2011
identification of types of Explanation, Definition and properties of
cables. Demonstration & conductors, insulators and semi-conductors. Voltage
practice on using standard grading of different types of Insulators, Temp. Rise
wire gauge &micrometer. permissible
Practice on crimping thimbles, Types of wires & cables standard wire gauge
Lugs. Specification of wires & Cables-insulation & voltage
Examination and checking of grades
cables and conductors and -Low , medium & high voltage
verification of materials Precautions in using various types of cables /
according to the span. Ferrules

24

Electrician Syllabus 2
 7 Verification of Ohm’s Law, Ohm’s Law -
Verification of Kirchhoff’s Simple electrical circuits and problems.
Laws. Reading of simple Electrical Layout.
Resistors -Law of Resistance.
Verification of laws of series Series and parallel circuits.
and parallel circuits.
Verification of open circuit and Kirchoff’s Laws and applications.
closed circuit network. Wheatstone bridge principle
And its applications.
Measuring unknown Effect of variation of temperature on resistance.
resistance using Wheatstone Different methods of measuring the values of
bridge, voltage drop method. resistance
Experiment to demonstrate
the variation of resistance of
A metal with the change in
temperature.

8. Practice on installation and Common Electrical Accessories, their specifications

overhauling common electrical in line with NEC 2011-Explanation of switches lamp
accessories as per simple holders, plugs and sockets. Developments of
Electrical circuit / Layout. domestic circuits, Alarm & switches, with individual
. switches, Two way switch .Security surveillance,
Fixing of switches, holder Fire alarm, MCB, ELCB, MCCB.
plugs etc. in T.W. boards.
-Identification and use of
wiring accessories concept of
switching.
9 Assembly of a Dry cell- Chemical effect of electric current-Principle of
Electrodes-Electrolytes. electrolysis. Faraday’s Law of electrolysis. Basic
Grouping of Dry cells for a principles of Electro-plating and Electro chemical
specified voltage and current, equivalents. Explanation of Anodes and cathodes.
Ni cadmium & Lithium cell. Lead acid cell-description, methods of charging-
Practice on Battery Charging, Precautions to be taken & testing equipment,
Preparation of battery Ni-cadmium & Lithium cell, Cathodic protection.
charging, Electroplating, Anodising.
Testing of cells, Installation of Different types of lead acid cells.
batteries, Charging of batteries
by different methods.
Practice on Electroplating and
anodising, Cathodic protection.
10 Routine care & maintenance of Rechargeable dry cell, description advantages and
Batteries disadvantages.
Care and maintenance of cells
Grouping of cells of specified voltage & current,
Sealed Maintenance free Batteries, Solar battery.

25

Electrician Syllabus 3
 11 Charging of a Lead acid cell, Inverter, Battery Charger, UPS-Principle of working.
filling of electrolytes- Testing Lead Acid cell, general defects & remedies.
of charging checking of Nickel Alkali Cell-description charging. Power &
discharged and fully charged capacity of cells. Efficiency of cells.
battery
12-13 Marking use of chisels and ALLIED TRADES:
hacksaw on flats, sheet metal Introduction of fitting trade. Safety precautions to
filing practice, filing true to be observed Description of files, hammers, chisels
line. hacksaw frames & blades-their specification &
Sawing and planning practice. grades. Care & maintenance of steel rule try square
Practice in using firmer chisel and files.
and preparing simple half lap Marking tools description & use. Description of
joint. carpenter’s common hand tools such as saws planes,
chisels mallet claw hammer, marking, dividing &
holding tools-their care and maintenance.

14 Drilling practice in hand Types of drills description & drilling machines,

drilling & power drilling proper use, care and maintenance.
machines. Grinding of drill bits. Description of taps & dies, types in rivets & riveted
Practice in using taps & dies, joints.
threading hexagonal & square Use of thread gauge.
nuts etc. cutting external
threads on stud and on pipes,
riveting practice.
15 Practice in using snips, Description of marking & cutting tools such as snubs
marking & cutting of straight & shears punches & other tools like hammers,
curved pieces in sheet metals. mallets etc. used by sheet metal workers. Types of
Bending the edges of sheets soldering irons-their proper uses.
metals. Riveting practice in Use of different bench tools used by sheet metal
sheet metal. Practice in making worker. Soldering materials, fluxes and process.
different joints in sheet metal
in soldering the joints.
16-17 Trace the magnetic field. Magnetism -
Assembly / winding of a simple Classification of magnets, methods of magnetising,
electro magnet. magnetic materials. Properties, care and
Use of magnetic compass. maintenance.
Identification of different types Para and Diamagnetism and Ferro magnetic
of Capacitors. Charging and materials. Principle of electro-magnetism, Maxwell’s
discharging of capacitor, corkscrew rule, Fleming’s left and right hand rules,
Testing of Capacitors using DC Magnetic field of current carrying conductors, loop
voltage and lamp. and solenoid. MMF, Flux density, reluctance. B.H.
curve, Hysteresis, Eddy current. Principle of electro-
magnetic Induction, Faraday’s Law, Lenz’s Law.
Electrostatics: Capacitor- Different types, functions
and uses.

26

Electrician Syllabus 4
18-19 Determine the characteristics of Alternating Current -Comparison and Advantages
RL, RC and RLC in A.C. Circuits D.C and A.C. Related terms
both in series and parallel. frequency
Experiment on poly phase Instantaneous value, R.M.S. value Average value,
circuits. Current, voltage, power Peak factor, form factor.
and power factor measurement Generation of sine wave, phase and phase
in single & poly- phase circuits. difference.
Measurement of energy in Inductive and Capacitive reactance Impedance (Z),
single and poly-phase circuits. - power factor (p.f).
Use of phase sequence meter. Active and Reactive power, Simple problems on A.C.
circuits, single
Phase and three-phase system etc.
Problems on A.C. circuits.
Power consumption in series and parallel, P.F. etc.
Concept three-phase Star and Delta connection.
Line and phase voltage, current and power in a 3
phase circuits with balanced and unbalanced load.
20 Practice on Earthing- different Earthing- Principle of different methods of
methods of earthing. earthing. i.e. Pipe, Plate, etc
Measurement of Earth Importance of Earthing.
resistance by earth tester. Improving of earth resistance
Testing of Earth Leakage by Earth Leakage circuit breaker (ELCB).
ELCB and relay. In absence of latest revision in respective BIS
provision for Earthing it is recommended to follow
IEC guidelines.
21 Determine the resistance by Basic electronics- Semiconductor energy level,
Colour coding atomic structure ‘P’ type and ‘N’ type.
Identification of active/passive Type of materials –P-N-junction. Classification of
components. Diodes – Reverse and Forward Bias,
Diodes-symbol - Tests - Heat sink.
Construct & Test Half wave Specification of Diode
rectifier ckt. PIV rating.
Full wave rectifier ckt. Explanation and importance of D.C. rectifier circuit.
Bridge rectifier ckt. Half wave, Full wave and Bridge circuit.
Filter circuits-passive filter.

22-23 (i) Project work

(ii) Industrial visit (optional)
24-25 Examination

26 Semester Gap

27

Electrician Syllabus 5
 Second Semester
(Semester Code no. ELE - 02)
Duration: Six Month

LEARNING OBJECTIVES OF 2nd SEMESTER

1. Apply safe working practices.

2. Comply environment regulation and housekeeping
3. Interpret & use Company terminology and technical communication
4. Identify and trace the simple electronic circuits, test and troubleshoot.
5. To carry out wiring as per IE rule.
6. Identify DC machines and measure the resistance.
7. To build up voltage in a DC generator
8. Able to connect, test and run a DC motor.
9. To install and connect transformers, parallel connection, carryout necessary maintenance,
able to connect and use CT and PT.
10. Able to install different measuring instruments with electrical circuits.

Week Professional Skills Professional Knowledge

No.
Trade Practical Trade Theory

1-2 Different wave shapes of Working principle and uses of an oscilloscope.

rectifiers and their values using Explanation of principle of working of a transistor
C.R.O. & configuration.
Identification of terminals, Types of transistors & its application.
construction & Testing of Specification and rating of transistors.
transistor. Explanation of transistor Amplifiers,
Assembly and testing of a single Amplifiers. – class A,B and C
stage Amplifier and checking Power amplifier
using an oscilloscope.
3-4 Measure Voltage, current & Explanation of oscillator-working
wave shape of oscillator using principle
CRO. Explanation of stages and types.
Simple circuits containing Multivibrator – applications.
U.J.T. for triggering, FET as an Introduction of basic concept of ICs, U.J.T., F.E.T.
amplifier and Power control Basic concept of power electronics devices e.g.
circuits by S.C.R. and Diac, triac, S.C.R., Diac, Triac, power MOSFET, G.T.O and
I.G.B.T. I.G.B.T.
Logic gates and circuits. Digital Electronics -Binary numbers, logic gates
and combinational circuits,

5-6 Practice in casing, Capping. Electric wirings, I.E. rules.

Conduit wiring with minimum Types of wirings both domestic and industrial.
to more number of points. Specifications for wiring.
Use of two way switches. Grading of cables and current ratings. Principle of
28

Electrician Syllabus 6
 Testing of wiring installation by laying out in domestic wiring.
meggar. Voltage drop concept.
-Fixing of calling bells/buzzers. Wiring system - P.V.C., concealed system.
-Making of test boards & Maintenance and Repairing data sheet preparation.
extension boards Specifications, standards for
Identification & demonstration conduits and accessories
on conduits and accessories & - Power Wiring
their uses, cutting , threading & - Control Wiring
laying - Information Communication
Installation, Testing, - Entertainment Wiring.
Maintenance and Repairing of Testing of wiring installation by meggar.
wiring.
7 Application of fuses, relay, MCB, Study of Fuses, Relays, Miniature circuit breakers
ELCB. (MCB), ELCB, etc.
8-9 Identification of the parts of a D.C. Machines - General concept of Electrical
D.C. machine. Machines.
Connection of shunt
Principle of D.C. generator. Use of Armature,
Generators
Field Coil, Polarity, Yoke, Cooling Fan, Commutator,
Voltages build up in DC Shunt
slip ring Brushes, Laminated core.
Generator (OCC) Measurement
of voltages, Demonstration on Explanation of D.C. Generators-types, parts. E.M.F.
field excitation. equation-self excitation and separately excited
Generators-Practical uses. Brief description of
series, shunt and compound generators.

10-11 Connection of compound Explanation of Armature reaction, inter poles and

Generator, Voltage their uses, connection of inter poles,
measurement, cumulative and Commutation. Losses & Efficiency of D.C.Generator,
differential –No Load and Parallel Operation of D.C.Generator.
Load characteristics of Series, Application of D.C. generators.
Shunt and Compound Care, Routine & preventive maintenance.
Generator.
Controlling and protecting
DC Generator.
Practicing dismantling and
assembling in D.C. Machine.
12-13 Identification of parts and DC Motors - Termsused in D.C. motor-Torque,
terminals of DC motors. Brake Torque, speed, Back-e.m.f. etc. and their
Connection, starting, running of relations, Types of D.C.Motor.
DC motors using Starters. Starters used in D.C. motors
Characteristics curve of DC Related problems
motors. Characteristics of D.C.Motor, Losses & Efficiency,
Practical application of Application of D.C. motors.
D.C. motors. Care, Routine & preventive maintenance.

14 Speed control of Types of speed control of DC motors in industry.

29

Electrician Syllabus 7
 DC motors by voltage , field, Control system. AC-DC, DC-DC control.
armature &
Word-Leonard system.
15-18 Identification of types of Working principle of Transformer.
transformers. Connection of classification C.T., P.T. Instrument and
transformers, Transformation Auto Transformer(Variac), Construction,
ratio, OC (No-load) and SC Single phase and Poly phase.
(short circuit) tests, efficiencies E.M.F. equation, parallel operation of transformer,
of transformers, testing of their connections.
transformer, parallel operation Regulation and efficiency.
of transformer. Use of Current Type of Cooling for transformer.
Transformer (C.T.) and Protective devices.
Potential (Voltage) transformer Specifications, simple problems on e.m.f.
(P.T.) Equation, turn ratio, regulations and
Testing of single phase and efficiency. Special transformers.
Three Phase Transformers - Transformer –Classification of transformer.
Cleaning, maintenance, testing Components, Auxiliary parts i.e. breather,
and changing of oil. Conservator, buchholze relay, other protective
Single and three phase devices. Transformer oil testing and Tap changer
connection. (off load and on load). Dry type transformer.
Bushings and termination.
19-21 Identify the type of Electrical Measuring Instruments -
Instruments. -types, indicating types. Deflecting torque,
Use of -PMMC , MI meter, Multi- Controlling torque and
meter(Digital/Analog) , Damping torque ,
Wattmeter, P F meter, Energy PMMC & MI meter (Ammeter, Voltmeter)
meter, Frequency meter, -Range extension
Calibration of - Multi-meter -Multimeter(Digital/Analog)
Phase sequence meter, Digital -Wattmeter
Instruments, etc - P.F. meter
Calibration of Energy meter. - Energy meter (Digital/analog)
–Insulation Tester (Megger), Earth tester.
-Frequency meter
-Phase Sequence meter
-Multimeter –Analog and Digital
-Tong tester
-Techometer.
22-23 Implant training / Project work (work in a team)

24-25 Revision

26 Examination

30

Electrician Syllabus 8
 Third Semester
(Semester Code no. ELE - 03)
Duration: Six Month

LEARNING OBJECTIVES OF 3rd SEMESTER

1. Apply safe working practices.

2. Comply environment regulation and housekeeping
3. Interpret & use Company terminology and technical communication
4. Able to install different induction motors along with starters.
5. Able to carry out wiring, rewinding of single phase and three phase motors.
6. Able to install, start, running and maintenance of MG set.
7. To install different illumination system.

Week Professional Skills Professional Knowledge

No.
Trade Practical Trade Theory
1-3 Identification of parts and Three phase Induction motor –
terminals of AC motors. Working principle –Production of rotating
Connection, starting, running of magnetic field, Squirrel Cage Induction motor, Slip-
AC motors using Starters. ring induction motor.
Measurement of slip, P.F. Construction , characteristics and
at various loads. Speed control, Slip & Torque .
Practice on connection Control & Power circuit of starters
of D.O.L Starter, Star /Delta D.O.L Starter, Star /Delta starter,
starter, Autotransformer Autotransformer starter, Rotor resistance starter,
starter, Rotor resistance starter, etc
etc Single phasing preventer.
Speed control of Induction Losses & efficiency.
motors by various methods. Application of Induction Motor
Practical application of Care, Routine & preventive maintenance.
A.C. motors.
4-5 Connection of single phase Single phase induction motor-
motor, identification, testing, Working principle, different method of starting and
running and reversing. running (capacitor start, permanent capacitor,
capacitor start & run, shaded pole technique).
FHP motors, Repulsion motor, stepper motor,
Hysteresis motor, Reluctance motor.
Application of Single phase induction motor
Identification, connection, Universal motor-advantages, Principle,
testing, running and reversing characteristics, applications in domestic and
of universal motor. Repulsion industrial appliances,
motor, stepper motor. Fault Location and Rectification.
Braking system of motor.
31

Electrician Syllabus 9
 Application of Universal motor.
6-7 Identification of parts and Alternator
terminals of Alternator. Explanation of alternator, types of prime mover,
Connection, starting, running of efficiency, regulations, phase sequence, Parallel
Alternator. operation.
Practical application of Specification of alternators and Brushless
Alternator. alternator.
Practice on alternators, voltage Verify the effect of changing the field excitation and
Building, load characteristic, Power factor correction of
voltage regulation, Parallel Industrial load.
operation.
Practice on installation, running
and maintenance of Alternators.
8 Identification of parts and SYNCHRONOUS MOTOR -
terminals of Synchronous Working principle, effect of change of excitation
motor. and load.
Connection, starting, running of V and anti V curve.
Synchronous motor.
Plot V curve. Cause of low power factor.
Practical application of Method of power factor improvement.
Synchronous motor.
9 Starting, running, building up Rotary Converter- Inverter, M.G. Set description,
voltage and loading of Motor Characteristics, specifications-running and
Generator (MG) set. Maintenance.
Maintenance of MG Sets. Solid state controller and Invertors.
Solid state controller and
Invertors- Operation and Use
10 Practice on winding of small TRANSFORMER Winding , Small Transformer
Transformers. winding techniques
11-12 Testing of burnt DC machine for DC machine Winding-- Armature winding terms,
rewinding – collection of data – pole pitch, coil pitch, back pitch, front pitch , Lap
developed diagram and and Wave winding , Progressive and retrogressive
connection – winding Winding, developed diagram.
procedure Growler construction, working & application.
Making frame(forma), coil
insulation, Slot insulation,
Insertion of coils in slots, coil
connection,
Practice on armature winding,
Growler testing, Baking,
Impregnation and
Varnishing & assembling.
13-15 Testing of burnt motor for ACmachine Winding—Motor winding
rewinding – collection of data – terminology – classification of conducting and
developed diagram and insulating materials used in winding – Types and
connection – winding methods of winding in single and three phase
procedure motors.

32

Electrician Syllabus 10
 Making frame(forma), coil
insulation, Slot insulation,
Insertion of coils in slots, coil
connection, Practice on single & Stator winding terms, coil side, end coil and
double layer, concentric grouping of coils. Connection to adjacent poles,
Winding, connected stator winding, alternate pole
Winding of table & ceiling fans, connection, developed diagram.
single phase and three phase
motors – testing of wound
motor
Baking, impregnating and
varnishing & assembling.
16-17 Installation of - Illumination, Laws of Illuminations, terminology
Mercury & Sodium vapours used , Illumination factors, intensity of light –
(H.P. & L.P.) importance of light, human eye factor, , units.
Halogen Lamps Types of illumination
Single FL tube and twin FL tube. Type of lamps
Practice on decoration lighting -Neon sign Halogen, Mercury vapour,
Principle of layout of sodium vapour, Fluorescent tube, CFL, LED, Solar
lighting installation. lamp & photo cell applications,
Practice on photo cells. Decoration lighting, Drum Switches, efficiency in
lumens per watt, Calculations of lumens.
Estimating placement of lights, fans and ratings.
18-19 Practice on wiring of electric Industrial wiring. Code of practice and relevant
motor, control panel, etc. span. Wiring of electric motors, control panel, etc.
Trace/Test of different circuit Types, specifications, advantages of different types
Breakers. of circuit brackets construction and maintenance.
Protective and control relays, Working principle and construction of domestic
contactors, etc. and agricultural appliances-their
Operation and use of maintenance.
XLPE cables.
20-21 Practice of wiring Maintenance Complete House-wiring layout.
of institute, hostel, hotel, Splitting load wire in accordance with NEC I.E.E.
residential building. Rules.
Layout and repairing of Multi-storeyed system.
workshop electrical installation. Fault finding and trouble shooting.
Fault finding practice

22-23 Implant training/Project work/work in a team

24-25 Revision
26 Examination

33

Electrician Syllabus 11
 Fourth Semester
(Semester Code no. ELE - 04)
Duration: Six Month

LEARNING OBJECTIVES OF 4th SEMESTER

1. Apply safe working practices.

2. Comply environment regulation and housekeeping
3. Interpret & use Company terminology and technical communication
4. Able to assemble and wire switch control cabinet for 3 phase induction motors.
5. Able to repair and maintenance of various domestic electrical appliances.
6. Able to prepare different types of power line diagram.

Week Professional Skills Professional Knowledge

No.
Trade Practical Trade Theory

1-3 Machine control cabinet Machine control cabinet /Control Panel Layout,
/Control Panel Layout, Assembly & Wiring:
Assembly & Wiring:
Layout of Control cabinet & control panel
Practice Layout drawing of
control cabinet , panel, power & Study & Understand Layout drawing of control
control circuits cabinet , panel, power & control circuits.

Preparing control cabinet / Control Elements: Isolator, pushbutton switches,

panel wiring for Indicating lamps, MCB, Fuse, Contactor, Relays,
Overload Relay, Timers, Rectifier, Limit switches,
1. Local & Remote control control transformers.
of Induction motor
2. Forward & Reverse Wiring Accessories: Race ways/ cable channel, DIN
operation of Induction Rail, Terminal Connectors, Thimbles, Lugs,
motor Ferrules, cable binding strap & buttons, nylon cable
3. Automatic Star Delta ties, sleeves, Gromats& clips
Starter
4. Automatic star delta
starter with change of
direction of rotation
5. Sequential control of
three motors.

Preparation of Control
cabinet & panel: Necessary
marking, cutting, filing, drilling,
tapping etc.

Mounting of control elements

34

Electrician Syllabus 12
 & wiring Accessories: Isolator,
pushbutton switches, Indicating
lamps, meters, MCB, Fuse,
Contactor, Relays, Overload
Relay, Timers, Rectifier, Limit
switches, control transformers,
Raceways/cable channel,
Terminal connectors etc.

Wiring of control
cabinet/panel: As per wiring
diagram.

Bunching of wires & cables,

channelling, tying etc.

Checking / buzzing the wiring.

Power connections & motor

connection & testing.
4-6 Repair & Test of Calling Bell, Domestic Appliances: Working principles and
Buzzer, Alarms, Electric Iron, circuits of common domestic equipment and
Heater, Light. appliances. – Calling Bell, Buzzer, Alarms, Electric
Maintenance and repair of Iron, Heater, Light.
domestic equipment – Electric Electric Kettle, Heater / Immersion Heater, Hot
Kettle, Heater / Immersion Plate, Oven, Geyser, Cooking range, Mixer, Washing
Heater, Hot Plate, Oven, Geyser, machine, , Motor Pump set, etc.
Cooking range, Mixer, Washing Concept of Neutral and Earth.
machine, , Motor Pump set, etc.
7 Practice on Thermal power POWER GENERATION :
plant simulator (free version) Generation sources of energy, Comparison of
or Plant visit. energy resources. Types of fuels. Advantages of
liquid fuel & solid fuel.
To prepare layout plan, single
Various ways of electrical power generation. •
line diagram of the Thermal
Thermal • Hydro electric • Nuclear • Non-
power system of generation. Conventional
Thermal
Coal based, diesel based & Gas based Turbine.
Constituents in steam power station.
8 Practice on Hydro power plant Hydro Electric:
simulator (free version) or Schematic arrangement of Hydro-Electric Power
Plant visit. Station. Constituents of Hydro Electric Plant. Types
To prepare layout plan, single of Hydro Electric Power station. Advantages
line diagram of the Hydro &disadvantages.

35

Electrician Syllabus 13
 electric power system of
generation.
9 Practice on Nuclear power Nuclear:
plant simulator (free version) Schematic arrangement of Nuclear Power Station.
or Plant visit. Composition of an atomic Nucleus. Advantages &
To prepare layout plan, single disadvantages. Comparison of above Power Plant.
line diagram of the Nuclear
power system of generation.
10-11 Practice on Non-conventional Non-Conventional
power plant simulator (free An introduction to Power generation through non-
version) or Plant visit. conventional power generation such as Solar, Bio-
To prepare layout plan, single Gas, Wind energy and Micro-hydel, Tidal waves,
line diagram of the non- etc. Basic principal, Advantages & disadvantages of
conventional power system of each.
generation.

12 Identification and specification TRANSMISSION OF ELECTRICAL POWER

of different type of insulator
Electrical Supply System :
used in HT line.
Comparison of AC and DC transmission.
Binding of Pin type insulator,
Advantages of High transmission voltage.
shackle type and suspension
type insulators. Introduction to Single phase , three phase-3 wire
system in transmission lines
Fixing of jumper by crimping
tool. Overhead Lines:

Main components of overhead lines-Types of

power line Low voltage line medium Voltage line &
high voltage line Voltage standard Conductor
materials, line supports, Insulators, types of
Insulators

13 Skinning and dressing of cables. Under Ground Cable :

Straight joint of different types Construction of cables. Material for cables, its
of underground cables. insulation. Classification of cables, cables for 3-
phase service, Laying of underground cable. Types
Test /check the insulation
of cable faults and their location.
resistance of cables by using
megger.

Locating the faults (open

36

Electrician Syllabus 14
 circuit, short circuit & leakage)
in cables.

14 To visit & prepare layout plan, DISTRIBUTION OF POWER

single line diagram of
Function and equipment used in substation.
Transmission /distribution
Substation. Classification of distribution system-AC
distribution, Overhead v/s underground
Installation of bus bar and bus
distribution system.
coupler on LT line.
Essential features of switchgears. Isolator, Switch
Replacement and testing of
gear equipments, bus-bar arrangement, Short
transformer oil.
circuit, faults in power system.

Circuit breakers – Introduction & Classification of

circuit breakers

lightening arrestors used in HT lines.

15-16 Speed control of DC motor : Introduction, Construction & Working of power

Connection, parameterization transistor, thyristor.
and speed control by Thyristor/ Introduction, Construction, Working, Parameters &
DC Drive. application of DC drive.

17-18 Speed control of AC motor : Speed control of 3 phase induction motor by using
-Uses of SCR and other modern VVVF/AC Drive.
semiconductor devices in Introduction, Construction, Working, Parameters &
controlling speed of motors and application of AC drive
in changing the direction of
rotation of motors.
Connection, parameterization
and speed control by AC Drive.
19-21 Break down, Routine & Schedule of electrical preventive maintenance.
Preventive maintenance of Break down, Routine & Preventive maintenance of
DC/AC machines, Voltage DC/AC machines, Voltage stabilizer, U.P.S.
stabilizer, Inverter, U.P.S. &Equipments.
&Equipments.

22-23 Implant training / Project work (work in a team)

24-25 Revision

26 Examination

37

Electrician Syllabus 15