XC6802 Series ETR2501-005b

1 Cell Li-ion Battery Linear Charger IC

with Constant-Current/Constant-Voltage

■GENERAL DESCRIPTION
The XC6802 series is a constant-current/constant-voltage linear charger IC for single cell lithium-ion batteries. The XC6802
includes a reference voltage source, battery voltage monitor, driver transistor, constant-current/constant-voltage charge circuit,
over heat protection circuit, phase compensation circuit. The battery charge termination voltage is internally set to 4.2V ±
0.7% and the trickle charge voltage and accuracy is 2.9V ±3%. In trickle charge mode, a safe charge to a battery is possible
because approximately 1/10 out of setting charge current is supplied to the battery. With an external RSEN resistor, the charge
current can be set freely up to 800mA (MAX.), therefore, the series is ideal for various battery charge applications. The series’
charge status output pin, /CHG pin, is capable of checking the IC’s charging state while connecting with an external LED.

■APPLICATIONS ■ FEATURES
● Charging docks, charging cradles Operating Voltage Range : 4.25V ~ 6.0V
● MP3 players, portable audio players Charge Current : Externally set up to 800mA
● Cellular phones, PDAs (MAX.)
● Bluetooth headsets Charge Termination Voltage : 4.2V ±0.7%
Trickle Charge Voltage : 2.9V ±3%
Supply Current (Stand-by) : 15μA (TYP.)
Packages : SOT-89-5, SOT-25, USP-6C
Constant-current/constant-voltage operation
with thermal shutdown
Automatic recharge
Charge status output pin
Soft-start function (Inrush limit current)

■TYPICAL APPLICATION CIRCUIT ■TYPICAL PERFORMANCE

CHARACTERISTICS
●Battery Charge Cycle

Li-ion
Li- io n Battery
Bat t e r yCharge
C h ar geCycle
C yc le
VIN=5.0V, CIN=1μF
VIN=5.0V, CIN=1uF
RSEN=2kΩ, 830mAh
RSEN=2kohm, 830mAh Battery
Battery
700 4.40
Battery
Battery Voltage
Voltage
600 4.20
Charge Current IBAT (mA)

Battery Voltage VBAT(V)

Charge Current : IBAT (mA)

500 4.00
Battery Voltage : VBAT (V)

400 3.80

300 3.60

200 ChargeCurrent
Charge Current 3.40

100 3.20

0 3.00
0.00 0.25 0.50 0.75 1.00 1.25 1.50 1.75 2.00

Time
Time (hours)
(hour)

1/18
 XC6802 Series
■PIN CONFIGURATION

USP-6C
SOT-89-5 SOT-25
(BOTTOM VIEW)
(TOP VIEW) (TOP VIEW)

* The dissipation pad for the USP-6C package

should be solder-plated in recommended mount
pattern and metal masking so as to enhance
mounting strength and heat release. If the pad
needs to be connected to other pins, it should be
connected to the VSS (No. 2) pin.

■PIN ASSIGNMENT
PIN NUMBER
PIN NAME FUNCTION
SOT-25 SOT-89-5 USP-6C
1 5 3 /CHG Charge Status Output Pin
2 2 2 VSS Ground
3 4 1 BAT Charge Current Output Pin
4 3 6 VIN Input Voltage Pin
5 1 4 ISEN Charge Current Setup Pin
- - 5 NC No Connection

■ PRODUCT CLASSIFICATION
●Ordering Information

XC6802A42X①②-③(*1)

DESIGNATOR DESCRIPTION SYMBOL DESCRIPTION

PR SOT-89-5
PR-G SOT-89-5 (Halogen & Antimony free)
Packages MR SOT-25
①②-③
Taping Type * MR-G SOT-25 (Halogen & Antimony free)
ER USP-6C
ER-G USP-6C (Halogen & Antimony free)

(*1)
The “-G” suffix indicates that the products are Halogen and Antimony free as well as being fully RoHS compliant.
(*2)
The device orientation is fixed in its embossed tape pocket. For reverse orientation, please contact your local Torex sales office or
representative. (Standard orientation: ①R-③, Reverse orientation: ①L-③)

2/18
 XC6802
Series

■BLOCK DIAGRAM

■ABSOLUTE MAXIMUM RATINGS

Ta=25℃
PARAMETER SYMBOL RATINGS UNIT
VIN Pin Voltage VIN VSS – 0.3 ~ + 6.5 V
ISEN Pin Voltage VSEN VSS – 0.3 ~ VIN + 0.3 V
BAT Pin Voltage VBAT VSS – 0.3 ~ + 6.5 V
/CHG Pin Voltage V/CHG VSS – 0.3 ~ + 6.5 V
BAT Pin Current IBAT 900 mA
500
SOT-89-5
1300 （PCB mounted）*
250
Power Dissipation SOT-25 Pd * mW
600 （PCB mounted）
120
USP-6C
1000 （PCB mounted）*
Operating Temperature Range Topr - 40 ~ + 85 ℃
Storage Temperature Range Tstg - 55 ~ + 125 ℃

* The power dissipation figure shown is PCB mounted. Please refer to page 15 to 17 for details.

3/18
 XC6802 Series

■ELECTRICAL CHARACTERISTICS
XC6802A42x
Ta=25℃
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNIT CIRCUIT
Input Voltage VIN 4.25 - 6.0 V -
Supply Current ISS Charge mode, RSEN=10kΩ - 15 35 μA ③
Stand-by Current ISTBY Stand-by mode - 15 35 μA ③
Shut-down mode
Shut-down Current ISHUT - 10 23 μA ③
(RSEN=NC, VIN<VBAT or VIN<VUVLO）
Float Voltage 1 VFLOAT1 TA=25℃, IBAT=40mA ×0.993 4.2 ×1.007 V ②
Float Voltage 2 (*1) VFLOAT2 0℃≦TA≦50℃, IBAT=40mA ×0.99 4.2 ×1.01 V -
Maximum Battery Current (*2) IBATMAX 800 mA -
Battery Current 1 IBAT1 RSEN=10kΩ, CC mode 93 100 107 mA ③
Battery Current 2 IBAT2 RSEN=2kΩ, CC mode 465 500 523 mA ③
Battery Current 3 IBAT3 Stand-by mode, VBAT=4.2V - - 2 μA ③
Battery Current 4 IBAT4 Shut-down mode (RSEN=NC) - - 1 μA ⑤
Battery Current 5 IBAT5 Sleep mode, VIN=0V - - 1 μA ③
Trickle Charge Current 1 ITRIKL1 VBAT<VTRIKL, RSEN=10kΩ 6 10 14 mA ③
Trickle Charge Current 2 ITRIKL2 VBAT<VTRIKL, RSEN=2kΩ 30 50 70 mA ③
Trickle Voltage VTRIKL RSEN=10kΩ, VBAT Rising 2.913 2.9 2.987 V ③
Trickle Voltage
VTRIKL_HYS - 58 90 116 mV ③
Hysteresis Width
UVLO Volatge VUVLO ＶIN: L → H 3.686 3.8 3.914 V ③
UVLO Hysteresis Width VUVLO_HYS - 150 190 280 mV ③
Manual Shut-down Voltage VSD ISEN: L → H 1.4 - - V ①
Manual Shut-down Voltage
VSD_HYS - - 100 - mV ①
Hysteresis Width
VIN-VBAT
VASD ＶIN: L → H 70 100 140 mV ③
Shut-down Release Voltage
VIN-VBAT Shut-down Voltage
VASD_HYS - - 70 - mV ③
Hysteresis Width
C/10 Charge Termination
ITERM1 RSEN=10kΩ 0.07 0.10 0.13 mA/mA ②
Current Threshold 1
C/10 Charge Termination
ITERM2 RSEN=2kΩ 0.07 0.10 0.13 mA/mA ②
Current Threshold 2
ISEN Pin Voltage VISEN RSEN=10kΩ, CC mode - 1.0 - V ③
/CHG Pin
I/CHG1 VBAT=4.3, V/CHG=5V 8 20 50 μA ③
Weak Pull-Down Current
/CHG Pin
I/CHG2 VBAT=4.0V, V/CHG=1V 4 10 20 mA ③
Strong Pull-Down Current
/CHG Pin
V/CHG I/CHG＝5mA - 0.35 0.7 V ④
Output LOW Voltage
Recharge Battery
ΔVRECHRG VFLOAT1-VRECHRG 100 150 200 mV ③
Threshold Voltage
ON Resistance RON IBAT=100mA - 450 900 mΩ ①
Soft-Start Time tSS 100 150 200 μs ⑥
Recharge Battery Time tRECHRG 0.4 2 4 ms ②
Battery Termination IBAT falling (less than charge
tTERM 0.3 1 3.5 ms ②
Detect Time current /10)
Current Sense Pin
ISEN_pull_up - - 1.3 - μA ①
Pull-Up Current
Thermal Shut-Down
TTSD Junction temperature - 115 - ℃ -
Detect Temperature
Thermal Shut-Down
TTSR Junction temperature - 95 - ℃ -
Release Temperature
* Unless otherwise stated, VIN=5.0V.
O O
NOTE: *1: The figures under the condition of 0 C≦TA≦50 C are guaranteed by design calculation.
*2: When the RSEN resistance is set, the battery current shall not be exceeded to 800mA.

4/18
 XC6802
Series

■OPERATIONAL EXPLANATION

<Charge Cycle>
If the BAT pin voltage is less than 2.9V, the charger enters trickle charge mode. In this mode, a safe battery charge is possible
because approximately only 1/10 of the charge current which was set by the ISEN pin, is supplied to the battery. When the BAT
pin voltage rises above 2.9V, the charger enters constant-current mode (CC mode) and the battery is charged by the
programmed charge current. When the BAT pin voltage reaches 4.2V, the charger enters constant-voltage mode (CV mode)
automatically. After this, the charge current starts to drop and when it reaches a level which is 1/10 of the programmed charge
current, the charge terminates.

<Setting Charge Current>

The charge current can be set by connecting a resistor between the ISEN pin and the VSS pin. The battery charge current, IBAT,
is 1000 times the current out of the ISEN pin. Therefore, the charge current, IBAT, is calculated by the following equations:

IBAT = (VISEN / RSEN) x 1000 (VISEN = 1.0V: Current sense pin voltage)
However IBAT≦800mA

<Charge Termination>
The battery charge is terminated when the charge current decreases to 1/10 of the full charging level after the battery pin
voltage reaches a float voltage. An internal comparator monitors the ISEN pin voltage to detect the charge termination. When
the comparator monitors the ISEN pin voltage is less than 100mV (charge termination detect) for 1ms (charge termination detect
time), the IC enters stand-by mode. A driver transistor turns off during the stand-by mode. In this state, a failure detection
circuit and a monitoring circuit of the battery pin voltage operates and supply current is reduced to 10μA.

<Automatic Recharge>
In stand-by mode battery voltage falls. When the voltage level at the battery pin drops to 4.05V or less, the charge cycle
automatically re-starts after a delay of 2ms. As such, no external activation control is needed.

5/18
 XC6802 Series

■OPERATIONAL EXPLANATION (Continued)

IBAT

Charge
Current

IBAT/10

4.20V
4.05V

Battery
Voltage

2.9V

Trickle CC CV Standby Recharge

Battery Termination Detect Time Recharge Battery Time
(1ms, Typ) (2ms, Typ)

Strong Pull Down Weak Pull Down Strong Pull Down

/CHG Pin (10mA, Typ) (20uA, Typ) (10mA, Typ)
Status

<Charge Condition Status>

The /CHG pin constantly monitors the charge states classified as below:
●Strong pull-down: I/CHG=10mA (TYP.) in a charge cycle,
●Weak pull-down: I/CHG=20μA (TYP.) in a stand-by mode,
●High impedance: in shutdown mode.

<Connection of Shorted BAT Pin>

Even if the BAT pin is shorted to the VSS, a trickle charge mode starts to operate for protecting the IC from destruction caused
by over current.

<Under-voltage Lockout (UVLO)>

The UVLO circuit keeps the charger in shut-down mode until the input voltage, VIN, rises more than the UVLO voltage.
Moreover, in order to protect the battery charger, the UVLO circuit keeps the charger in shut-down mode when a voltage
between the input pin voltage and BAT pin voltage falls to less than 30mV. The charge will not restart until the voltage
between the input pin voltage and BAT pin voltage rises more than 100mV. During the shut-down mode, the driver transistor
turns off but a failure detection circuit operates, and supply current is reduced to 10μA.

<Soft-Start Function>
To protect against inrush current from the input to the battery, soft-start time is set in the circuit optimally (100μs, TYP.).

<Manual Shut-Down>
During the charge cycle, the IC can be shifted to the shut-down mode by floating the ISEN pin. For this, a drain current to the
battery is reduced to less than 2μA and a shut-down current of the IC is reduced to less than 10μA. A new charge cycle
starts when reconnecting the current sense resistor.

<Opened BAT Pin>

When the BAT pin is left open, the IC needs to be shut-down once after monitoring the CHG pin by a microprocessor etc and
keeping the ISEN pin in H level.

<Backflow Prevention Between the BAT Pin and the VIN Pin>
A backflow prevention circuit protects against current flowing from the BAT pin to the VIN pin even the BAT pin voltage is higher
than the VIN pin voltage.

6/18
 XC6802
Series

■TEST CIRCUITS

1. ON Resistance, Shut-down Voltage, ISEN Pull-up current 2. Battery Termination Detect Time, Recharge Battery Time
C/10 Charge Termination Current Threshold, Battery Termination Voltage

3. Trickle Charge Current, Battery Current, ISEN Pin Voltage

Trickle Charge Voltage, UVLO, Recharge Battery Threshold Voltage 4. /CHG Pin, Output Low Voltage

VIN-VBAT Shut-down Voltage, /CHG Pin Current

Supply Current, Stand-by Current, Shut-down Current

5. Battery Current 4 6. Soft-Start

7/18
 XC6802 Series
■TYPICAL PERFORMANCE CHARACTERISTICS

（1）充電サイクル特性例
(1) Charge Cycle

XC6802A42X XC6802A42X
VIN=5V, CIN=1.0μF VIN=5V, CIN=1.0μF
RSEN=1.25kΩ, 420mAh Battery RSEN=1.25kΩ, 850mAh Battery
1000 4.50 1000 4.50
Battery
バッテリー電圧 Voltage Battery
バッテリー電圧Voltage
(mA)

BAT (mA)
BAT (mA)

(mA)
BAT (V)

BAT (V)
(V)

(V)
800 4.20 800 4.20

Voltage: VBAT

Voltage: VBAT
Current: IBAT

Current: IBAT
バッテリー電圧　V

バッテリー電圧　V
600 3.90 600 3.90
バッテリー電流　I

バッテリー電流　I
400 3.60 400 3.60

Battery

Battery
Battery

Battery
Battery
バッテリー電流 Current
200 3.30 200 3.30
Battery
バッテリー電流Current
0 3.00 0 3.00
0 0.3 0.6 0.9 1.2 1.5 0 0.3 0.6 0.9 1.2 1.5
充電時間　Time (hour)
Charge Time (hour) 充電時間　Time (hour)
Charge Time (hour)

(2) Battery Current vs. Battery Voltage

（2）定電流モード特性例

XC6802A42X XC6802A42X

VIN=5V, RSEN=10kΩ VIN=5V, RSEN=2kΩ

120 600
(mA)

100
(mA)

500
BAT(mA)

BAT(mA)
Current: IBAT

Current: IBAT

80 400
バッテリー電流　I

バッテリー電流　I

60 300

40 200
Battery

Battery

-40℃ -40℃
25℃ 25℃
20 100
85℃ 85℃
0 0
3.5 3.6 3.7 3.8 3.9 4.0 4.1 4.2 4.3 3.5 3.6 3.7 3.8 3.9 4.0 4.1 4.2 4.3
バッテリー電圧　V
Battery Voltage: VBAT(V) バッテリー電圧　V
Battery Voltage: BAT (V)(V)
VBAT
BAT (V)

XC6802A42X
XC6802A42X
RSEN=10kΩ
120 RSEN=2kΩ
600
100
(mA)

(mA)

500
IBAT(mA)

(mA)
IBAT

80
Battery Current: BAT

Battery Current:BAT

400
バッテリー電流　I

バッテリー電流　I

60 300
VIN=4.5V VIN=4.5V
40 200
VIN=5.0V VIN=5.0V
VIN=5.5V VIN=5.5V
20 100
VIN=6.0V VIN=6.0V

0 0
3.5 3.6 3.7 3.8 3.9 4.0 4.1 4.2 4.3 3.5 3.6 3.7 3.8 3.9 4.0 4.1 4.2 4.3
バッテリー電圧　V
Battery Voltage: VBAT(V)
BAT (V)
Battery Voltage:BAT
バッテリー電圧　V VBAT
(V) (V)

8/18
 XC6802
Series

■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)

（3）定電圧モード特性例
(3) Battery Voltage vs. Battery Current

XC6802A42X XC6802A42X

VIN=5V, RSEN=10kΩ VIN=5V, RSEN=2kΩ

4.25 4.25
(V)

(V)
BAT(V)

4.20

BAT(V)
4.20
Voltage: VBAT

Voltage: VBAT
バッテリー電圧　V

バッテリー電圧　V
4.15 4.15

4.10 4.10
Battery

Battery
-40℃ -40℃
4.05 25℃ 4.05 25℃
85℃ 85℃
4.00 4.00
50 60 70 80 90 100 110 250 300 350 400 450 500 550

バッテリー電流　I
Battery BAT(mA)
Current: IBAT (mA) Battery Current: BAT
バッテリー電流　I IBAT(mA)
(mA)

XC6802A42X XC6802A42X

RSEN=10kΩ RSEN=2kΩ
4.25 4.25
(V)

(V)

4.20
(V)
BAT(V)

4.20
Battery Voltage: VBAT

Battery Voltage: V
バッテリー電圧　V BAT
BAT
バッテリー電圧　V

4.15 4.15

VIN=4.5V VIN=4.5V
4.10 4.10
VIN=5.0V VIN=5.0V
VIN=5.5V VIN=5.5V
4.05 4.05
VIN=6.0V VIN=6.0V

4.00 4.00
50 60 70 80 90 100 110 250 300 350 400 450 500 550
バッテリー電流　I
Battery Current:BAT(mA)
IBAT (mA) バッテリー電流　I IBAT(mA)
Battery Current: BAT (mA)

(4) Charge Termination

（4）充電完了電圧 Voltage vs. Ambient Temperature
- 周囲温度特性例
XC6802A42X XC6802A42X
(V)

VFLOAT1 (V)

VIN=5V, IBAT=40mA, RSEN=10kΩ VIN=5V, IBAT=200mA, RSEN=2kΩ

FLOAT1（V） FLOAT1

4.24 4.24
4.23 4.23
V

FLOAT1（V）
Termination Voltage:

Termination Voltage:

4.22 4.22
4.21 4.21
充電完了電圧1　V

充電完了電圧1　V

4.20 4.20
4.19 4.19
4.18 4.18
Charge

Charge

4.17 4.17
4.16 4.16
-50 -25 0 25 50 75 100 -50 -25 0 25 50 75 100
Ambient周囲温度　Ta（℃）
Temperature: Ta (℃) 周囲温度　Ta（℃）
Ambient Temperature: Ta (℃)

9/18
 XC6802 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)

(5) Battery Current vs.-Ambient

（5）バッテリー電流 周囲温度特性例Temperature

XC6802A42X XC6802A42X

VIN=5V, VBAT=3.8V, RSEN=10kΩ VIN=5V, VBAT=3.8V, RSEN=2kΩ

80 460
(mA)

(mA)
（mA）
（mA）

90 480
IBAT1

IBAT2
Battery Current2:BAT2
Battery Current1:BAT1

バッテリー電流2　I
バッテリー電流1　I

100 500

110 520

120 540
-50 -25 0 25 50 75 100 -50 -25 0 25 50 75 100
Ambient周囲温度　Ta（℃）
Temperature: Ta (℃) 周囲温度　Ta（℃）
Ambient Temperature: Ta (℃)

(6) Trickle Charge Current

（6）トリクル充電電流 vs. Ambient Temperature
- 周囲温度特性例

XC6802A42X XC6802A42X

VIN=5V, VBAT=2.5V, RSEN=10kΩ VIN=5V, VBAT=2.5V, RSEN=2kΩ

ITRIKL1 (mA)

ITRIKL2 (mA)

6 30
ITRIKL1（mA）

ITRIKL2（mA）

7 35
8 40
Charge Current1:

Charge Current2:

9 45
トリクル充電電流1

トリクル充電電流2

10 50
11 55
12 60
Trickle

Trickle

13 65
14 70
-50 -25 0 25 50 75 100 -50 -25 0 25 50 75 100
Ambient周囲温度　Ta（℃）
Temperature: Ta (℃) 周囲温度　Ta（℃）
Ambient Temperature: Ta (℃)

(7) Trickle Voltage vs.

（7）トリクル電圧 Ambient Temperature
- 周囲温度特性例 (8) Manual Shutdown Voltage vs. Ambient
（8）マニュアルシャットダウン電圧 Temperature
- 周囲温度特性例

XC6802A42X XC6802A42X

VIN=5V
3.00 1.45
Manual Shutdown Voltage: VSDSD(V)

マニュアルシャットダウン電圧（検出）
Manual Shutdown Voltage (Detect)
マニュアルシャットダウン電圧　V

2.95 1.40
(V)
（V）

マニュアルシャットダウン電圧（解除）
Manual Shutdown Voltage (Release)
VTRIKL

2.90 1.35
Voltage: TRIKL

2.85
トリクル電圧　V

1.30
（V）

2.80 1.25
Trickle

2.75 1.20
トリクル電圧（解
Trickle Voltage (Release)
2.70 除） 1.15
Trickle Voltage (Detect)
トリクル電圧（検
2.65 1.10
-50 -25 0 25 50 75 100 -50 -25 0 25 50 75 100
Ambient周囲温度　Ta（℃）
Temperature: Ta (℃) Ambient Temperature:
周囲温度　Ta（℃） Ta (℃)

10/18
 XC6802
Series

■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)

(9) UVLO Voltage-vs.

（9）UVLO電圧 Ambient Temperature
周囲温度特性例 (10) VIN – VBAT Shutdown Voltage vs. -Ambient
（10）VIN-VBAT間シャットダウン電圧 周囲温度特性例Temperature

XC6802A42X XC6802A42X

ASD VASD (V)

3.95 200

Release Voltage:
VIN-VBAT間シャットダウン電圧（検出）
VIN-VBAT Shutdown Voltage (Detect)

間シャットダウン解除電圧　V
（V）(V)

3.85
160 VIN-VBAT間シャットダウン電圧（解除）
VIN-VBAT Shutdown Voltage (Release)
VUVLO

3.75
Voltage:UVLO

120
UVLO電圧　V

（V）
3.65

Shutdown
80
3.55
UVLO

UVLO電圧（検出）
UVLO Voltage (Detect) 40

BATBAT
3.45

IN-V
UVLO電圧（解除）
UVLO Voltage (Release)

VIN –VV
3.35 0
-50 -25 0 25 50 75 100 -50 -25 0 25 50 75 100
周囲温度　Ta（℃）
Ambient Temperature: Ta (℃) 周囲温度　Ta（℃）
Ambient Temperature: Ta (℃)

（11）充電完了検出時間
(11) Time vs. Ambient Temperature (12)
- 周囲温度特性例
Charge Termination Detect Recharge Time-vs.
（12）再充電時間 Ambient Temperature
周囲温度特性例
XC6802A42X XC6802A42X
（ms）tTERM (ms)

VIN=5V VIN=5V
2.5 3.0
(ms)
Time:

2.5
（ms）

2.0
Termination DetectTERM

tRECHRG
Time:RECHRG

2.0
充電完了検出時間　T

1.5
再充電時間　T

1.5
1.0
Recharge

1.0
0.5 0.5
Charge

0.0 0.0
-50 -25 0 25 50 75 100 -50 -25 0 25 50 75 100
Ambient周囲温度　Ta（℃）
Temperature: Ta (℃) 周囲温度　Ta（℃）
Ambient Temperature: Ta (℃)

(13) Recharge Threshold Voltage

（13）再充電しきい値電圧 vs. Ambient Temperature
- 周囲温度特性例 （14）ソフトスタート時間
(14) - 周囲温度特性例
Soft Start Time vs. Ambient Temperature

XC6802A42X XC6802A42X
△VRECHRG (mV)

VIN=5V VIN=5V
220 220
RECHRG（mV）

SS（μs）

200 200
Soft Start Time: ｔss (μs)
Threshold Voltage:

180 180
再充電しきい値電圧　△V

ソフトスタート時間　T

160 160

140 140

120 120
Recharge

100 100

80 80
-50 -25 0 25 50 75 100 -50 -25 0 25 50 75 100

Ambient周囲温度　Ta（℃）
Temperature: Ta (℃) Ambient周囲温度　Ta（℃）
Temperature: Ta (℃)

11/18
 XC6802 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)

（15）ON抵抗
(15) - 周囲温度特性例
ON Resistance vs. Ambient Temperature （16）シャットダウン電流
(16) - 周囲温度特性例
Shutdown Current vs. Ambient Temperature

XC6802A42X XC6802A42X

VIN=4.15V, IBAT=100mA, VISEN=0.5V VIN=5V, RSEN=NC

1.0 25

Shut（μA）
(μA)
20
ON (Ω)

0.8
（Ω）

Current: ISHUT
シャットダウン電流　I
ON抵抗　RONR

0.6 15
ON Resistance:

0.4 10

Shutdown
0.2 5

0.0 0
-50 -25 0 25 50 75 100 -50 -25 0 25 50 75 100

Ambient周囲温度　Ta（℃）
Temperature: Ta (℃) 周囲温度　Ta（℃）
Ambient Temperature: Ta (℃)

（17）スタンバイ電流
(17) - 周囲温度特性例
Stand-by Current vs. Ambient Temperature (18) /CHG Weak
（18）/CHG WeakPullPull
Down Current vs. /CHG Pin Voltage
Down電流特性例

XC6802A42X XC6802A42X
ICHG1 (μA)

VIN=5V, VBAT=4.3V
VIN=5V, VBAT=4.3V
35 45
chg1（μA)

-40℃
(μA)

30 40
Pull Down Current:
（μA）

25℃
35
Weak_Pull_Down電流　I

25
ISTBY

85℃
Current: Stby

30
スタンバイ電流　I

20 25
15 20
15
Stand-by

10
/CHGWeak

10
5 5
/CHG

0 0
-50 -25 0 25 50 75 100 0.0 1.0 2.0 3.0 4.0 5.0 6.0

Ambient周囲温度　Ta（℃）
Temperature: Ta (℃) /CHG端子電圧　V
/CHG Pin Voltage: CHG
VCHG(V)(V)

(19) /CHG Strong

（19）/CHG PullPull
Strong Down Current vs. /CHG Pin Voltage
Down電流特性例 (20) /CHG Pin Output Low Voltage-vs.
（20）/CHG端子出力LOW電圧 Ambient Temperature
周囲温度特性例
XC6802A42X
XC6802A42X
(mA)

VIN=5V, VBAT=4.0V I/CHG=5mA, VIN=5V, VBAT=2.5V

（V）(V)
(mA)

25 1.0
V/CHG
ICHG2

0.9
Low Voltage:/CHG

-40℃
Pull Down Current:chg2

20 0.8
Strong_Pull_Down電流　I

25℃
出力LOW電圧　V

85℃ 0.7
15 0.6
0.5
10 0.4
Pin Output

0.3
/CHG端子

5 0.2
Strong
/CHG/CHG

0.1
0 0.0
/CHG

0 1 2 3 4 5 6 -50 -25 0 25 50 75 100

/CHG Pin Voltage: VCHG

/CHG端子電圧　V (V)
CHG(V) Ambient周囲温度　Ta（℃）
Temperature: Ta (℃)

12/18
 XC6802
Series

■PACKAGING INFORMATION
●SOT-25 ●SOT-89-5
4.5±0.1
+0.15
1.6
-0.2
0.42±0.06 0.42±0.06 0.42±0.06 +0.03
0.4
-0.02

5 2 4

0.8 MIN
(0.4)

5°
Φ1.0

4.35 MAX
2.5±0.1

5°
0.8 MIN
1 2 3
+0.03
0.4
0.42±0.06 0.47±0.06 0.42±0.06 -0.02

8° 8°

(0.1)

1.5±0.1
1.5±0.1 1.5±0.1 (unit : mm)

●USP-6C ●USP-6C Reference Pattern Layout

＜Package Dimensions＞
1.8±0.05
0.225

0.25
0.5

0.25

1.8
0.5

0.25

1pin INDENT

●USP-6C Reference Metal Mask Design

0.30±0.05
(0.10)
0.225

0.25
0.5

0.25
0.6

1.2
1.4
0.5

0.25

0.50 0.20±0.05
0.10±0.05 1.4±0.1
(unit : mm)

13/18
 XC6802 Series

■MARKING RULE

SOT25

5 4 ① Represents product series

MARK PRODUCT SERIES
① ② ③ ④ ⑤ N XC6802******

1 2 3 ② Standard product, Represent the 7th digits

MARK PRODUCT SERIES
A XC6802A*****
SOT89-5

5 2 4 Custom product, the last 2 digits

MARK SEQUENCE No. PRODUCT SERIES
0 001 XC6802S001**
① ② ③

④ ⑤

③ Standard product, Represents the 8th digits

MARK PRODUCT SERIES
4 XC6802*4****
1 2 3

Custom product, the last 1 digits

USP6C MARK SEQUENCE No. PRODUCT SERIES
1 001 XC6802S001**

1 6
①

④⑤ Represents production lot number

④

2 5
01 to 09, 0A to 0Z, 11 to 9Z, A1 to A9, AA to Z9, ZA to ZZ in order.
⑤

3 4
(G, I, J, O, Q, W excepted)
*No character inversion used.

14/18
 XC6802
Series

■PACKAGING INFORMATION (Continued)

● SOT-89-5 Power Dissipation

Power dissipation data for the SOT-89-5 is shown in this page.

The value of power dissipation varies with the mount board conditions.
Please use this data as one of reference data taken in the described condition.
て
1. Measurement Condition (Reference data)
Condition: Mount on a board
Ambient: Natural convection
Soldering: Lead (Pb) free
2
Board: Dimensions 40 x 40 mm (1600 mm in one side)
Copper (Cu) traces occupy 50% of the board area
In top and back faces
Package heat-sink is tied to the copper traces
Material: Glass Epoxy (FR-4)
Thickness: 1.6 mm
Through-hole: 5 x 0.8 Diameter

Evaluation Board (Unit: mm)

2. Power Dissipation vs. Operating temperature

Board Mount (Tj max = 125℃)

Ambient Temperature（℃） Power Dissipation Pd（mW） Thermal Resistance (℃/W)

25 1300
76.92
85 520

Pd-Ta特性グラフ
Pd vs. Ta

1400
Power Dissipation Pd (mW)

1200
許容損失Pd（mW）

1000
800
600
400
200
0
25 45 65 85 105 125
Ambient Temperature Ta (℃)
周辺温度Ta（℃）

15/18
 XC6802 Series
■PACKAGING INFORMATION (Continued)
● SOT-25 Power Dissipation

Power dissipation data for the SOT-25 is shown in this page.

The value of power dissipation varies with the mount board conditions.
Please use this data as one of reference data taken in the described condition.

1. Measurement Condition (Reference data)

Condition: Mount on a board
Ambient: Natural convection
Soldering: Lead (Pb) free
2
Board: Dimensions 40 x 40 mm (1600 mm in one side)
Copper (Cu) traces occupy 50% of the board area
In top and back faces
Package heat-sink is tied to the copper traces
(Board of SOT-26 is used.)
Material: Glass Epoxy (FR-4)
Thickness: 1.6 mm
Through-hole: 4 x 0.8 Diameter

Evaluation Board (Unit: mm)

2. Power Dissipation vs. Operating temperature

Board Mount (Tj max = 125℃)

Ambient Temperature（℃） Power Dissipation Pd（mW） Thermal Resistance (℃/W)

25 600
166.67
85 240

Pd-Ta特性グラフ
Pd vs. Ta

700
Power Dissipation Pd (mW)

600
許容損失Pd（mW）

500
400
300
200
100
0
25 45 65 85 105 125
周辺温度Ta（℃）
Ambient Temperature Ta (℃)

16/18
 XC6802
Series

■PACKAGING INFORMATION (Continued)

● USP-6C Power Dissipation

Power dissipation data for the USP-6C is shown in this page.

The value of power dissipation varies with the mount board conditions.
Please use this data as one of reference data taken in the described condition.

1. Measurement Condition (Reference data)

Condition: Mount on a board
Ambient: Natural convection
Soldering: Lead (Pb) free
2
Board: Dimensions 40 x 40 mm (1600 mm in one side)
Copper (Cu) traces occupy 50% of the board area
In top and back faces
Package heat-sink is tied to the copper traces
Material: Glass Epoxy (FR-4)
Thickness: 1.6 mm
Through-hole: 4 x 0.8 Diameter

Evaluation Board (Unit: mm)

2. Power Dissipation vs. Operating temperature

Board Mount (Tj max = 125℃)

Ambient Temperature（℃） Power Dissipation Pd（mW） Thermal Resistance (℃/W)

25 1000
100
85 400

Pd vs. Ta
Power Dissipation Pd（mW）

1200
1000
800
600
400
200
0
25 45 65 85 105 125
Ambient Temperature Ta（℃）

17/18
 XC6802 Series

1. The products and product specifications contained herein are subject to change without
notice to improve performance characteristics. Consult us, or our representatives
before use, to confirm that the information in this datasheet is up to date.
2. We assume no responsibility for any infringement of patents, patent rights, or other
rights arising from the use of any information and circuitry in this datasheet.
3. Please ensure suitable shipping controls (including fail-safe designs and aging
protection) are in force for equipment employing products listed in this datasheet.
4. The products in this datasheet are not developed, designed, or approved for use with
such equipment whose failure of malfunction can be reasonably expected to directly
endanger the life of, or cause significant injury to, the user.
(e.g. Atomic energy; aerospace; transport; combustion and associated safety
equipment thereof.)
5. Please use the products listed in this datasheet within the specified ranges.
Should you wish to use the products under conditions exceeding the specifications,
please consult us or our representatives.
6. We assume no responsibility for damage or loss due to abnormal use.
7. All rights reserved. No part of this datasheet may be copied or reproduced without the
prior permission of TOREX SEMICONDUCTOR LTD.

18/18