Scribd
Upload
64 views9 pages

03 Midterm Answer DSP Spring 2017

This document contains the midterm exam for a digital signal processing module taken in the spring 2017 semester at October University. The exam consists of 5 questions worth a total of 20 marks. Question 1 has 5 subparts checking properties of linear, time-invariant systems. Question 2 involves determining the impulse response of systems in series and parallel configurations. Question 3 finds the direct form II realization of a given linear time-invariant system. Question 4 analyzes a discrete-time system and finds its input-output relation and impulse response. Question 5 derives the right-sided signal and radius of convergence from a given Z-transform.

Uploaded by

Alaa Farouk
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
64 views9 pages

03 Midterm Answer DSP Spring 2017

This document contains the midterm exam for a digital signal processing module taken in the spring 2017 semester at October University. The exam consists of 5 questions worth a total of 20 marks. Question 1 has 5 subparts checking properties of linear, time-invariant systems. Question 2 involves determining the impulse response of systems in series and parallel configurations. Question 3 finds the direct form II realization of a given linear time-invariant system. Question 4 analyzes a discrete-time system and finds its input-output relation and impulse response. Question 5 derives the right-sided signal and radius of convergence from a given Z-transform.

Uploaded by

Alaa Farouk
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

October University for Modern Sciences and Arts

October University for Modern Sciences & Arts

Midterm Model Answer

Faculty Engineering
Department Electrical Communication and Electronics
Module Code ECE4332
Module Title Digital Signal Processing
Semester Spring 2017
Time Allowed 1.5 hours
Total Mark 20
No. of Pages 9 (including the cover page)
Material provided None
Equipment permitted No programmable calculator
Additional Instructions None

No books, paper or electronic devices are permitted to be brought into the


examination room other than those specified above.

Page 1 of 9
October University for Modern Sciences and Arts

Faculty of Engineering
Module Code: ECE 4332
Module Title: Digital Signal Processing
Semester: Spring 2017

Answer all/ no. of the following questions:

Question 1:……………………………………………………………….. (5 Marks)


a) Check the causality of the following system
y[n] = x[n]+ 4x[n+3]
Solution:
The output depends on the future input x[n+3]
So the system is non-causal
To check, if we substitute
y[3] = x[3]+4x[6]
The output at n=3, depends on the future input at n=6
So the system is non-causal

b) Check the linearity of the following system


y[n] = Ax[n]+B
Solution:
T{a1x1[n]+a2x2[n]}
= A(a1x1[n]+a2x2 [n])+B ……….……(1)
a1T{x1[n]}+a2T{x2 [n]}
=a1 (Ax1[n]+B)+a2 (Ax2 [n]+B) ……….(2)
(1)≠(2)
The system non-linear

Page 2 of 9
October University for Modern Sciences and Arts

c) Check the time variance of the following system


y[n] = x[-n]
Solution:
T{x[n-no]} = x[-n-no]….……………(1)
y[n-no]= x[-(n-no)] = x[-n+no] ……(2)
(1)≠(2)
The system time-variant

d) Check the stability of the following system


y[n] = 4x[n-3]+3
Solution:
Suppose x[n]=C δ[n], y[-1]=0,
x[n]=C at n=0, and x[n]=0 otherwise (bounded input)
y[0] = 4x[0-3]+3 = 4x[-3]+3 = 0+3=3
y[1] = 4x[1-3]+3 = 4x[-2]+3 = 0+3=3
y[2] = 4x[2-3]+3 = 4x[-1]+3 = 0+3=3
y[3] = 4x[3-3]+3 = 4x[0]+3 = 4C+3
y[4] = 4x[4-3]+3 = 4x[1]+3 = 0+3=3
If 1<|C|<∞, the output is bounded, the system is stable.

e) Check if the following systems are static or dynamic


i. y[n] = n x[n] + bx3[n]
ii. y[n] = x[n] + 3x[n-1]
Solution:
i. static or memoryless
ii. dynamic or with memory

Page 3 of 9
October University for Modern Sciences and Arts

Question 2:……………………………………………………………….. (4 Marks)


Determine and sketch the overall system formed by the following impulse
responses

for the following cases:


(3 Marks)
a) Cascading connection
(1 Mark)
b) Parallel connection

Page 4 of 9
October University for Modern Sciences and Arts

Page 5 of 9
October University for Modern Sciences and Arts

Page 6 of 9
October University for Modern Sciences and Arts

Question 3:……………………………………………………………….. (2 Marks)


Determine the direct form II realization for each of the following LTI
systems:
y(n)= x(n) - x(n - 1) + 2x(n - 2 ) - 3x(n – 4)

Determine the direct form 11 realization for each of the following LTI systems
y(n)= x(n) - x(n - 1) + 2x(n - 2 ) - 3x(n – 4)

Page 7 of 9
October University for Modern Sciences and Arts

Question 4:……………………………………………………………….. (5 Marks)


Consider the discrete-time system shown in Figure 1
a) Find the input-output relation. (1 Mark)
b) Compute the 6 first samples of its impulse response. (4 Marks)

X[n] y[n]
+ +

z-1

1/2

Figure 1

Page 8 of 9
October University for Modern Sciences and Arts

Question 5:……………………………………………………………….. (4 Marks)


For the following X(z) find:
a) The right-sided signal x[n] (3 Marks)
b) The radius of convergence ROC (1 Mark)

X ( z)  1
11.5z 1  0.5z  2

2 1
X ( z)  
1 z  1 1 0.5z  1
n n
x[n]=2(1) u[n]-(0.5) u[n]

ROC:│z│>1 &│z│>0.5
So │z│>1

Page 9 of 9

You might also like