Scribd
Upload
286 views1 page

G-Codes and M-Functions - Turning: © Peter Smid CNC Programming Handbook

The document lists G-codes and M-functions used in Fanuc CNC turning. It provides descriptions of common G-codes like G00, G01, G02, G03 as well as M-functions for spindle control, coolant, and more. The document contains information relevant to CNC turning operations.

Uploaded by

Amutha Saravanan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
286 views1 page

G-Codes and M-Functions - Turning: © Peter Smid CNC Programming Handbook

The document lists G-codes and M-functions used in Fanuc CNC turning. It provides descriptions of common G-codes like G00, G01, G02, G03 as well as M-functions for spindle control, coolant, and more. The document contains information relevant to CNC turning operations.

Uploaded by

Amutha Saravanan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

G-CODES AND M-FUNCTIONS - TURNING

Fanuc CNC has an option of three G-code groups (A, B and C). The most common G-code group in North America is
the A group. All G-codes listed are for the G-code group A, unless otherwise specified ! Groups cannot be mixed !

G00 Rapid positioning G72 Profile roughing cycle for facing


G01 Linear interpolation G73 Pattern repeating cycle
G02 Circular interpolation - clockwise G74 Peck drilling cycle along the Z-axis
G03 Circular interpolation - counterclockwise G75 Grooving cycle along the X-axis
G04 Dwell function (as a separate block) G76 Complex thread cutting cycle
G07 Hypothetical axis interpolation G90 Cutting cycle A Grp A
G09 Exact stop check - one block only G90 Absolute input of dimensions Grp B
G10 Programmable data input (Data setting) G91 Incremental input of dimensions Grp B
G11 Data setting mode cancel G92 Simple thread cutting cycle Grp A
G18 ZX plane designation G92 Tool position register and/or: Grp B
G20 English units of input G92 Maximum spindle RPM/CSS mode Grp B
G21 Metric units of input G94 Cutting cycle B Grp A
G22 Stored stroke check - on G94 Feed per minute (in/min or mm/min) Grp B
G23 Stored stroke check - off G95 Feed per revolution (in/rev or mm/rev) Grp B
G25 Spindle fluctuation detection - on G96 Constant surface speed control – CSS
G26 Spindle fluctuation detection - off G97 Constant surface speed control cancel - RPM
G27 Machine zero position check G98 Feed per minute (in/min or mm/min) Grp A
G28 Machine zero return (reference point 1) G99 Feed per revolution (in/rev or mm/rev) Grp A
G29 Return from machine zero
G30 Machine zero return (reference point 2) M00 Compulsory program stop
G31 Skip function M01 Optional program stop
G32 Threading function - constant lead M02 End of program (usually no reset and rewind)
G34 Threading function - variable lead M03 Spindle rotation normal – CW
G35 Circular thread cutting – CW M04 Spindle rotation reverse – CCW
G36 Circular thread cutting – CCW or: M05 Spindle rotation stop
G36 Automatic tool compensation (X-axis) M07 Coolant mist – on
G37 Automatic tool compensation (Z-axis) M08 Coolant pump motor – on
G40 Tool nose radius compensation - cancel M09 Coolant pump motor – off
G41 Tool nose radius compensation - left M10 Chuck open
G42 Tool nose radius compensation - right M11 Chuck close
G50 Tool position register and/or: M12 Tailstock quill in (non-standard)
G50 Maximum spindle RPM in CSS mode M13 Tailstock quill out (non-standard)
G52 Local coordinate offset M17 Turret indexing forward (non-standard)
G53 Machine coordinate system M18 Turret indexing reverse (non-standard)
G54 Work coordinate offset 1 M19 Programmable spindle orientation (OPTION)
G55 Work coordinate offset 2 M21 Tailstock forward (non-standard)
G56 Work coordinate offset 3 M22 Tailstock backward (non-standard)
G57 Work coordinate offset 4 M23 Gradual pull-off from thread – on
G58 Work coordinate offset 5 M24 Gradual pull-off from thread – off
G59 Work coordinate offset 6 M30 End of program (with reset and rewind)
G61 Exact stop mode M41 Low gear range selection (if applicable)
G62 Automatic corner override mode M42 Medium gear range selection 1 (if applicable)
G64 Cutting mode M43 Medium gear range selection 2 (if applicable)
G65 Custom macro call M44 High gear range selection (if applicable)
G68 Mirror image for double turrets - on M48 Feedrate override cancel - off (deactivated)
G69 Mirror image for double turrets - cancel M49 Feedrate override cancel - on (activated)
G70 Profile finishing cycle M98 Subprogram call
G71 Profile roughing cycle for turning and boring M99 Subprogram end

© Peter Smid CNC Programming Handbook

You might also like