ELECTRODE QUALIFICATION TEST RECORD

ANERI CONSTRUCTION PVT. LTD.

A: Project : Silvasa Pipeline Project
Tested at : Met-Heat Engineers,Vadodara.
Manufacturer's Name : Lincoln Electric
Brand Name Fleet Weld 5P+
Batch Number & : 13404691
Size tested : 2.5mm
Classification & Code : E6010 AWS SFA - 5.1
Intended for welding
in position : 1G
In combination with : Nil
(If any)
Code of Reference : ASME Sec. II - C SFA 5.1/A5.1M:2004.2010,Add.2011 Schedule J
(Used for Testing)
Special Requirement : Impact Test at -20°C & -30°C
(If any)

B: All-weld Tensile Test

Base Material Used : ASTM A516 Gr.70 - 16 mm Thk

Pre. Heat Temp. : 105°C (Minimum)
As per SFA 5.1
Postweld Heat
: Nil
treatment details
Visual Examination OK
Radiographic
Examination Results OK Report No.: L213D/RT/13-14 Date: 07.01.2014
Tensile Test Result :- Accepted TC No.: 86-XP/2014 Date: 13.01.2014

Identification U.T.S. Yield Point Elongation

Minimum Required 60000 psi 48000 psi 22.00%
Actual 103688 psi 78954 psi 25.20%

C: Impact Test Result :- Accepted TC No.: 57-X /2014 Date: 13.01.2014

Test Temperature : minus 20°C (-20°C)
Notch in : "V" Notch at weld
Type of Specimens : As per SFA 5.1
Size of Specimen: 10 x 10.00 mm

Specimen No. Impact Value Average Required Value

Weld 1 62 J
Average 27 J
Weld 2 68 J 66.67 J Individual 20 J
Weld 3 70 J
Weld 4 58 J
--
Weld 5 72 J

For Aneri Construction Pvt. Ltd. FOR CEIL FOR JP KENNY/GSPL

Name:

Sign:

Date:
 ELECTRODE QUALIFICATION TEST RECORD
ANERI CONSTRUCTION PVT. LTD.
A: Project : Silvasa Pipeline Project
Tested at : Met-Heat Engineers,Vadodara.
Manufacturer's Name : Lincoln Electric
Brand Name Fleet Weld 5P+
Batch Number & : 13404691
Size tested : 2.5mm
Classification & Code : E6010 AWS SFA - 5.1
Intended for welding
in position : 1G
In combination with : Nil
(If any)
Code of Reference : ASME Sec. II - C SFA 5.1/A5.1M:2004.2010,Add.2011 Schedule J
D: Impact Test Result :- Accepted TC No.: 56-X /2014 Date: 13.01.2014
Test Temperature : minus 30°C(-30°C)
Notch in : "V" Notch at weld

Type of Specimens : As per SFA 5.1

Size of Specimen: 10 x 10.00 mm

Specimen No. Impact Value Average Required Value

Weld 1 60 J
Weld 2 58 J 56 J Average 27 J
Individual 20 J
Weld 3 50 J
Weld 4 28 J
--
Weld 5 60 J

E: Chemical Analysis of Electrode

Certificate No.: 152-KD/2014 Date: 13.01.2014
OBTAINED VALUE %
% CARBON 0.156
% MANGANESE 0.592
% SILICON 0.282
% PHOSPHORUS 0.009
% SULPHUR 0.007
% NICKLE 0.011
% CHROMIUM 0.018
% MOLYBDENUM 0.024
% VANADIUM 0.003

Remarks:- The above test results are meeting with Chemical requirements of SFA 5.1 GRADE -E -6010; 2010 Specification

Destructive Testes at: Met Heat Engineers Pvt. Ltd.

Report No: 86-XP/2014,57-X/2014,56-X/2014 and 152-KD/2014

Date: 13.01.2014
Note :- All the copies of Test Reports are attached which are conducted by Met - Heat Laboratory.
For Aneri Construction Pvt. Ltd. FOR CEIL FOR JP KENNY/GSPL

Name:

Sign:
 ELECTRODE QUALIFICATION TEST RECORD
ANERI CONSTRUCTION PVT. LTD.
A: Project : Silvasa Pipeline Project
Tested at : Met-Heat Engineers,Vadodara.
Manufacturer's Name : Lincoln Electric
Brand Name Fleet Weld 5P+
Batch Number & : 13404691
Size tested : 2.5mm
Classification & Code : E6010 AWS SFA - 5.1
Intended for welding
in position : 1G
In combination with : Nil
(If any)
Code of Reference : ASME Sec. II - C SFA 5.1/A5.1M:2004.2010,Add.2011 Schedule J
Date:
 ELECTRODE QUALIFICATION TEST RECORD
ANERI CONSTRUCTION PVT. LTD.
A: Project : Gujarat Gas City Distribution Project
Tested at : Met-Heat Engineers,Vadodara.
Manufacturer's Name : Adore Welding Ltd.
Brand Name Supabase - X- Plus.
Batch Number & : 61312010
Size tested : 2.5mm
Classification & Code : E7018 AWS SFA - 5.1
Intended for welding
in position : 1G
In combination with : Nil
(If any)
Code of Reference : ASME Sec. II - C SFA 5.1
(Used for Testing)
Special Requirement : Impact Test at -30°C & -20°C
(If any)

B: All-weld Tensile Test 25° Max

ASTM A516 Gr.70 - 14

Base Material Used : mm Thk 14mm

Pre. Heat Temp. : 105°C (Minimum)

As per SFA 5.1 13 mm Backing Strip
Postweld Heat
: Nil
treatment details
Visual Examination OK
Radiographic
Examination Results OK Report No.: L213B/RT/13-14 Date: 07.01.2014
Tensile Test Result :- Accepted TC No.: 84-XP/2014 Date: 20.01.2014

Identification U.T.S. Yield Point Elongation

Minimum Required 70000 psi 58000 psi 22.00%
Actual 90233 psi 77546 psi 26.00%

C: Impact Test Result :- Accepted TC No.: 53-X /2014 Date: 20.01.2014

Test Temperature : minus 20°C (-20°C)
Notch in : "V" Notch at weld
Type of Specimens : As per SFA 5.1
Size of Specimen: 10 x 10.00 mm

Specimen No. Impact Value Average Required Value

Weld 1 166 J
Average 27 J
Weld 2 156 J 160.67 J Individual 20 J
Weld 3 160 J
Weld 4 154 J
--
Weld 5 184 J

For Aneri Construction Pvt. Ltd. FOR ICS CLIENT

Name:

Sign:

Date:
 ELECTRODE QUALIFICATION TEST RECORD
ANERI CONSTRUCTION PVT. LTD.
A: Project : Gujarat Gas City Distribution Project
Tested at : Met-Heat Engineers,Vadodara.
Manufacturer's Name : Adore Welding Ltd.
Brand Name Supabase - X- Plus.
Batch Number & : 61312010
Size tested : 2.5mm
Classification & Code : E7018 AWS SFA - 5.1
Intended for welding
in position : 1G
In combination with : Nil
(If any)
Code of Reference : ASME Sec. II - C SFA 5.1
D: Impact Test Result :- Accepted TC No.: 54-X /2014 Date: 20.01.2014
Test Temperature : minus 30°C(-30°C)
Notch in : "V" Notch at weld
Type of Specimens : As per SFA 5.1
Size of Specimen: 10 x 10.00 mm

Specimen No. Impact Value Average Required Value

Weld 1 138 J
Average 27 J
Weld 2 124 J 134.67 J Individual 20 J
Weld 3 142 J
Weld 4 90 J
--
Weld 5 150 J

E: Chemical Analysis of Electrode

Certificate No.: 150-KD/2014 Date: 20.01.2014
OBTAINED VALUE %
% CARBON 0.049
% MANGANESE 1.339
% SILICON 0.515
% PHOSPHORUS 0.022
% SULPHUR 0.011
% NICKLE 0.013
% CHROMIUM 0.032
% MOLYBDENUM 0.022
% VANADIUM 0.019

Remarks:- The above test results are meeting with Chemical requirements of SFA 5.1 GRADE -E -7018; 2010
Specification

Destructive Testes at: Met Heat Engineers Pvt. Ltd.

Report No: 84-XP/2014,52-X/2014,53-X/2014 and 150-KD/2014
Date: 20.01.2014

Note :- All the copies of Test Reports are attached which are conducted by Met - Heat Laboratory.
For Aneri Construction Pvt. Ltd. FOR ICS CLIENT

Name:

Sign:
 ELECTRODE QUALIFICATION TEST RECORD
ANERI CONSTRUCTION PVT. LTD.
A: Project : Gujarat Gas City Distribution Project
Tested at : Met-Heat Engineers,Vadodara.
Manufacturer's Name : Adore Welding Ltd.
Brand Name Supabase - X- Plus.
Batch Number & : 61312010
Size tested : 2.5mm
Classification & Code : E7018 AWS SFA - 5.1
Intended for welding
in position : 1G
In combination with : Nil
(If any)
Code of Reference : ASME Sec. II - C SFA 5.1

Date:
 ELECTRODE QUALIFICATION TEST RECORD
ANERI CONSTRUCTION PVT. LTD.
A: Project : Gujarat Gas City Distribution Project
Tested at : Met-Heat Engineers,Vadodara.
Manufacturer's Name : Adore Welding Ltd.
Brand Name Supabase - X- Plus.
Batch Number & : 61311001
Size tested : 3.15mm
Classification & Code : E7018 AWS SFA - 5.1
Intended for welding
in position : 1G
In combination with : Nil
(If any)
Code of Reference : ASME Sec. II - C SFA 5.1
(Used for Testing)
Special Requirement : Impact Test at -30°C & -20°C
(If any)

B: All-weld Tensile Test 25° Max

ASTM A516 Gr.70 - 14

Base Material Used : mm Thk 14mm

Pre. Heat Temp. : 105°C (Minimum)

As per SFA 5.1 13 mm Backing Strip
Postweld Heat
: Nil
treatment details
Visual Examination OK
Radiographic
Examination Results OK Report No.: L213C/RT/13-14 Date: 07.01.2014
Tensile Test Result :- Accepted TC No.: 85-XP/2014 Date: 20.01.2014

Identification U.T.S. Yield Point Elongation

Minimum Required 70000 psi 58000 psi 22.00%
Actual 88981 psi 74545 psi 28.80%

C: Impact Test Result :- Accepted TC No.: 55-X /2014 Date: 20.01.2014

Test Temperature : minus 20°C (-20°C)
Notch in : "V" Notch at weld
Type of Specimens : As per SFA 5.1
Size of Specimen: 10 x 10.00 mm

Specimen No. Impact Value Average Required Value

Weld 1 142 J
Average 27 J
Weld 2 134 J 144.67 J Individual 20 J
Weld 3 158 J
Weld 4 126 J
--
Weld 5 168 J

For Aneri Construction Pvt. Ltd. FOR ICS CLIENT

Name:

Sign:

Date:
 ELECTRODE QUALIFICATION TEST RECORD
ANERI CONSTRUCTION PVT. LTD.
A: Project : Gujarat Gas City Distribution Project
Tested at : Met-Heat Engineers,Vadodara.
Manufacturer's Name : Adore Welding Ltd.
Brand Name Supabase - X- Plus.
Batch Number & : 61311001
Size tested : 3.15mm
Classification & Code : E7018 AWS SFA - 5.1
Intended for welding
in position : 1G
In combination with : Nil
(If any)
Code of Reference : ASME Sec. II - C SFA 5.1
D: Impact Test Result :- Accepted TC No.: 54-X /2014 Date: 20.01.2014
Test Temperature : minus 30°C(-30°C)
Notch in : "V" Notch at weld
Type of Specimens : As per SFA 5.1
Size of Specimen: 10 x 10.00 mm

Specimen No. Impact Value Average Required Value

Weld 1 132 J
Average 27 J
Weld 2 134 J 138.67 J Individual 20 J
Weld 3 150 J
Weld 4 116 J
--
Weld 5 162 J

E: Chemical Analysis of Electrode

Certificate No.: 151-KD/2014 Date: 20.01.2014
OBTAINED VALUE %
% CARBON 0.049
% MANGANESE 1.337
% SILICON 0.563
% PHOSPHORUS 0.020
% SULPHUR 0.010
% NICKLE 0.013
% CHROMIUM 0.027
% MOLYBDENUM 0.022
% VANADIUM 0.017

Remarks:- The above test results are meeting with Chemical requirements of SFA 5.1 GRADE -E -7018; 2010
Specification

Destructive Testes at: Met Heat Engineers Pvt. Ltd.

Report No: 85-XP/2014,55-X/2014,54-X/2014 and 151-KD/2014
Date: 20.01.2014

Note :- All the copies of Test Reports are attached which are conducted by Met - Heat Laboratory.
For Aneri Construction Pvt. Ltd. FOR ICS CLIENT

Name:

Sign:
 ELECTRODE QUALIFICATION TEST RECORD
ANERI CONSTRUCTION PVT. LTD.
A: Project : Gujarat Gas City Distribution Project
Tested at : Met-Heat Engineers,Vadodara.
Manufacturer's Name : Adore Welding Ltd.
Brand Name Supabase - X- Plus.
Batch Number & : 61311001
Size tested : 3.15mm
Classification & Code : E7018 AWS SFA - 5.1
Intended for welding
in position : 1G
In combination with : Nil
(If any)
Code of Reference : ASME Sec. II - C SFA 5.1

Date:
 ELECTRODE QUALIFICATION TEST RECORD
ANERI CONSTRUCTION PVT. LTD.
A: Project :Silvasa Pipeline Project.
Tested at :Met Heat Laboratory,Vadodara.
Manufacturer's Name :Adore Welding
Brand Name :Tenalloy -Z-PLUS
Batch Number & :61310031
Size tested :2.5mm
Classification & Code :E7018-1 AWS/SFA - 5.1
Intended for welding
in position : 1G
In combination with : Nil
(If any)
Code of Reference :ASME Sec. II - C SFA 5.1
(Used for Testing)
Special Requirement : Impact Test at -46°C & -20°C
(If any)
B: All-weld Tensile Test
Base Material Used : ASTM A516 Gr.70 - 16 mm Thk
Pre. Heat Temp. : 105°C (Minimum)
Postweld Heat
: Nil
treatment details
Visual Examination OK
Radiographic
Examination Results OK Report No.: L213/RT/13-14 Date: 1/7/2014
Tensile Test Result :- Acceptable TC No.: 82-XP/2014/A Date: 1/13/2014

Identification U.T.S. Yield Point Elongation Remarks

Minimum Required 70000 psi 58000 psi 22.00%
Actual 95396 psi 85497 psi 25.20%

C: Impact Test Result :- Acceptable TC No.: 48-X/2014 Date: 1/13/2014

Test Temperature : Minus 460C(-460C)
Notch in : "V" Notch at weld

Type of Specimens :As per SFA 5.1

Size of Specimen: 10 x 10.00 mm

Specimen No. Impact Value Average Required Value Remarks.

Weld 1 98 J
Weld 2 128 J 113.33 J Average 27 J
Individual 20 J
Weld 3 114 J
Weld 4 88 J
--
Weld 5 128 J

For Aneri Construction Pvt. Ltd. FOR CEIL FOR GSPL

Name:
Sign:
Date:
 ELECTRODE QUALIFICATION TEST RECORD
ANERI CONSTRUCTION PVT. LTD.
A: Project :Silvasa Pipeline Project.
Tested at :Met Heat Laboratory,Vadodara.
Manufacturer's Name :Adore Welding
Brand Name :Tenalloy -Z-PLUS
Batch Number & :61310031
Size tested :2.5mm
Classification & Code :E7018-1 AWS/SFA - 5.1
Intended for welding
in position : 1G
In combination with : Nil
(If any)
Code of Reference :ASME Sec. II - C SFA 5.1
(Used for Testing)
Special Requirement : Impact Test at -46°C & -20°C
(If any)
C: Impact Test Result :- Acceptable TC No.: 49-X/2014 Date: 1/13/2014
Test Temperature : Minus 200C(-200C)
Notch in : "V" Notch at weld
Type of Specimens :As per SFA 5.1
Size of Specimen: 10 x 10.00 mm
Specimen No. Impact Value Average Required Value Remarks.
Weld 1 166 J
Average 27 J
Weld 2 160 J 159.33 J
Individual 20 J
Weld 3 152 J
Weld 4 150 J
--
Weld 5 168 J

Certificate No.: 148-KD/2014 Date: 1/13/2014

OBTAINED VALUE %
% CARBON 0.044
% MANGANESE 1.559
% SILICON 0.315
% PHOSPHORUS 0.023
% SULPHUR 0.006
% NICKLE 0.013
% CHROMIUM 0.032
% MOLYBDENUM 0.115
% VANADIUM 0.019

Remarks:- The above test results are meeting with Chemical requirements of SFA 5.1 GRADE -E-7018-1; 2010
Destructive Testes at: Met Heat Engineers Pvt. Ltd, Vadodara
Report No: 82-XP/2014/A,48-X/2014,49-X/2014,148-KD/2014
Date: 1/13/2014
Note :- All the copies of Test Reports are attached which are conducted by Met - Heat Laboratory.
For Aneri Construction Pvt. Ltd. FOR CEIL FOR GSPL
Name:
 ELECTRODE QUALIFICATION TEST RECORD
ANERI CONSTRUCTION PVT. LTD.
A: Project :Silvasa Pipeline Project.
Tested at :Met Heat Laboratory,Vadodara.
Manufacturer's Name :Adore Welding
Brand Name :Tenalloy -Z-PLUS
Batch Number & :61310031
Size tested :2.5mm
Classification & Code :E7018-1 AWS/SFA - 5.1
Intended for welding
in position : 1G
In combination with : Nil
(If any)
Code of Reference :ASME Sec. II - C SFA 5.1
(Used for Testing)
Special Requirement : Impact Test at -46°C & -20°C
(If any)
Sign:
Date:
 ELECTRODE QUALIFICATION TEST RECORD
ANERI CONSTRUCTION PVT. LTD.
A: Project :Silvasa Pipeline Project.
Tested at :Met Heat Laboratory,Vadodara.
Manufacturer's Name :Adore Welding
Brand Name :Tenalloy -Z-PLUS
Batch Number & :61006027
Size tested :3.2mm
Classification & Code :E7018-1 AWS/SFA - 5.1
Intended for welding
in position : 1G
In combination with : Nil
(If any)
Code of Reference :ASME Sec. II - C SFA 5.1
(Used for Testing)
Special Requirement : Impact Test at -46°C & -20°C
(If any)
B: All-weld Tensile Test
Base Material Used : ASTM A516 Gr.70 - 16 mm Thk
Pre. Heat Temp. : 105°C (Minimum)
Postweld Heat
: Nil
treatment details
Visual Examination OK
Radiographic
Examination Results OK Report No.: L213A/RT/13-14 Date: 1/7/2014
Tensile Test Result :- Acceptable TC No.: 83-XP/2014 Date: 1/13/2014

Identification U.T.S. Yield Point Elongation Remarks

Minimum Required 70000 psi 58000 psi 22.00%
Actual 89721 psi 77247 psi 26.00%

C: Impact Test Result :- Acceptable TC No.: 50-X/2014 Date: 1/13/2014

Test Temperature : Minus 460C(-460C)
Notch in : "V" Notch at weld

Type of Specimens :As per SFA 5.1

Size of Specimen: 10 x 10.00 mm

Specimen No. Impact Value Average Required Value Remarks.

Weld 1 84 J
Weld 2 70 J 82.67 J Average 27 J
Individual 20 J
Weld 3 94 J
Weld 4 32 J
--
Weld 5 122 J

For Aneri Construction Pvt. Ltd. FOR CEIL FOR JP KENNY/GSPL

Name:
Sign:

13 OF 41
 ELECTRODE QUALIFICATION TEST RECORD
ANERI CONSTRUCTION PVT. LTD.
A: Project :Silvasa Pipeline Project.
Tested at :Met Heat Laboratory,Vadodara.
Manufacturer's Name :Adore Welding
Brand Name :Tenalloy -Z-PLUS
Batch Number & :61006027
Size tested :3.2mm
Classification & Code :E7018-1 AWS/SFA - 5.1
Intended for welding
in position : 1G
In combination with : Nil
(If any)
Code of Reference :ASME Sec. II - C SFA 5.1
(Used for Testing)
Special Requirement : Impact Test at -46°C & -20°C
(If any)
Date:

14 OF 41
 ELECTRODE QUALIFICATION TEST RECORD
ANERI CONSTRUCTION PVT. LTD.
A: Project :Silvasa Pipeline Project.
Tested at :Met Heat Laboratory,Vadodara.
Manufacturer's Name :Adore Welding
Brand Name :Tenalloy -Z-PLUS
Batch Number & :61006027
Size tested :3.2mm
Classification & Code :E7018-1 AWS/SFA - 5.1
Intended for welding
in position : 1G
In combination with : Nil
(If any)
Code of Reference :ASME Sec. II - C SFA 5.1
(Used for Testing)
Special Requirement : Impact Test at -46°C & -20°C
(If any)
D: Impact Test Result :- Acceptable TC No.: 51-X/2014 Date: 1/13/2014
Test Temperature : Minus 20 C(-20 C)
0 0
Notch in : "V" Notch at weld
Type of Specimens :As per SFA 5.1
Size of Specimen: 10 x 10.00 mm
Specimen No. Impact Value Average Required Value Remarks.
Weld 1 148 J
Weld 2 142 J 148.00 J Average 27 J
Individual 20 J
Weld 3 154 J
Weld 4 140 J
--
Weld 5 162 J

Certificate No.: 149-KD/2014 Date: 1/13/2014

OBTAINED VALUE %
% CARBON 0.043
% MANGANESE 1.542
% SILICON 0.364
% PHOSPHORUS 0.019
% SULPHUR 0.012
% NICKLE 0.022
% CHROMIUM 0.059
% MOLYBDENUM 0.049
% VANADIUM 0.014

Remarks:- The above test results are meeting with Chemical requirements of SFA 5.1 GRADE -E-7018-1; 2010
Destructive Testes at: Met Heat Engineers Pvt. Ltd, Vadodara
Report No: 83-XP/2014,50-X/2014,51-X/2014,149-KD/2014
Date: 1/13/2014
Note :- All the copies of Test Reports are attached which are conducted by Met - Heat Laboratory.
For Aneri Construction Pvt. Ltd. FOR CEIL FOR JP KENNY/GSPL
Name:
Sign:

15 OF 41
 ELECTRODE QUALIFICATION TEST RECORD
ANERI CONSTRUCTION PVT. LTD.
A: Project :Silvasa Pipeline Project.
Tested at :Met Heat Laboratory,Vadodara.
Manufacturer's Name :Adore Welding
Brand Name :Tenalloy -Z-PLUS
Batch Number & :61006027
Size tested :3.2mm
Classification & Code :E7018-1 AWS/SFA - 5.1
Intended for welding
in position : 1G
In combination with : Nil
(If any)
Code of Reference :ASME Sec. II - C SFA 5.1
(Used for Testing)
Special Requirement : Impact Test at -46°C & -20°C
(If any)
Date:

16 OF 41
 ELECTRODE QUALIFICATION TEST RECORD
ANERI CONSTRUCTION PVT. LTD.
A: Project : Daman City Gas Distribution Project
Tested at : Met-Heat Engineers,Vadodara.
Manufacturer's Name : Lincoln Electric
Brand Name Fleet Weld 5P+
Batch Number & : 14359838
Size tested : 2.5mm
Classification & Code : E6010 AWS SFA - 5.1
Intended for welding
in position : 1G
In combination with : Nil
(If any)
Code of Reference : ASME Sec. II - C SFA 5.1
(Used for Testing)
Special Requirement : Impact Test at -20°C & -30°C
(If any)

B: All-weld Tensile Test

Base Material Used : A-36

Pre. Heat Temp. : 105°C (Minimum)
As per SFA 5.1
Postweld Heat
: Nil
treatment details
Visual Examination OK
Radiographic
Examination Results OK Report No.: L346/RT/15-16 Date: 02.02.2016
Tensile Test Result :- Accepted TC No.: 76-YE/2016 Date: 11.02.2016

Identification U.T.S. Yield Point Elongation

Minimum Required 60000 psi 48000 psi 22.00%
Actual 92167 psi 76052 psi 22.00%

C: Impact Test Result :- Accepted TC No.: 7-YA /2016 Date: 11.02.2016

Test Temperature : minus 20°C (-20°C)
Notch in : "V" Notch at weld
Type of Specimens : As per SFA 5.1
Size of Specimen: 10 x 10.00 mm

Specimen No. Impact Value Average Required Value

Weld 1 30 J
Average 27 J
Weld 2 42 J 36.67 J Individual 20 J
Weld 3 38 J
Weld 4 20 J
--
Weld 5 44 J

For Aneri Construction Pvt. Ltd. FOR ICS FOR IOAGPL

Name:

Sign:

Date:
 ELECTRODE QUALIFICATION TEST RECORD
ANERI CONSTRUCTION PVT. LTD.
A: Project : Daman City Gas Distribution Project
Tested at : Met-Heat Engineers,Vadodara.
Manufacturer's Name : Lincoln Electric
Brand Name Fleet Weld 5P+
Batch Number & : 14359838
Size tested : 2.5mm
Classification & Code : E6010 AWS SFA - 5.1
Intended for welding
in position : 1G
In combination with : Nil
(If any)
Code of Reference : ASME Sec. II - C SFA 5.1
D: Impact Test Result :- Accepted TC No.: 8-YA /2016 Date: 11.02.2016
Test Temperature : minus 30°C(-30°C)
Notch in : "V" Notch at weld

Type of Specimens : As per SFA 5.1

Size of Specimen: 10 x 10.00 mm

Specimen No. Impact Value Average Required Value

Weld 1 36 J
Weld 2 40 J 37.33 J Average 27 J
Individual 20 J
Weld 3 36 J
Weld 4 28 J
--
Weld 5 40 J

E: Chemical Analysis of Electrode

Certificate No.: 16-LC/2016 Date: 11.02.2016
OBTAINED VALUE %
% CARBON 0.161
% MANGANESE 0.723
% SILICON 0.296
% PHOSPHORUS 0.018
% SULPHUR 0.005
% NICKLE 0.022
% CHROMIUM 0.010
% MOLYBDENUM 0.007
% VANADIUM Nil

Remarks:- The above test results are meeting with Chemical requirements of SFA 5.1 GRADE -E -6010: 2013 Specification

Destructive Testes at: Met Heat Engineers Pvt. Ltd.

Report No: 76-YE/2016,7-YA/2016,8-YA/2016 and 16-LC/2016

Date: 11.02.2016
Note :- All the copies of Test Reports are attached which are conducted by Met - Heat Laboratory.
For Aneri Construction Pvt. Ltd. FOR ICS FOR IOAGPL

Name:

Sign:
 ELECTRODE QUALIFICATION TEST RECORD
ANERI CONSTRUCTION PVT. LTD.
A: Project : Daman City Gas Distribution Project
Tested at : Met-Heat Engineers,Vadodara.
Manufacturer's Name : Lincoln Electric
Brand Name Fleet Weld 5P+
Batch Number & : 14359838
Size tested : 2.5mm
Classification & Code : E6010 AWS SFA - 5.1
Intended for welding
in position : 1G
In combination with : Nil
(If any)
Code of Reference : ASME Sec. II - C SFA 5.1
Date:
 ELECTRODE QUALIFICATION TEST RECORD
ANERI CONSTRUCTION PVT. LTD.
A: Project : Daman City Gas Distribution Project
Tested at : Met-Heat Engineers,Vadodara.
Manufacturer's Name : Lincoln Electric
Brand Name Shield Arc HYP+
Batch Number & : 14245258
Size tested : 3.25mm
Classification & Code : E7010 AWS SFA - 5.5
Intended for welding
in position : 1G
In combination with : Nil
(If any)
Code of Reference : ASME Sec. II - C SFA 5.5
(Used for Testing)
Special Requirement : Impact Test at -20°C & -30°C
(If any)

B: All-weld Tensile Test

Base Material Used : A-36

Pre. Heat Temp. : 100°C (Minimum)
As per SFA 5.5
Postweld Heat
: Nil
treatment details
Visual Examination OK
Radiographic
Examination Results OK Report No.: L346A/RT/15-16 & 01 Date: 02.02.2016,18.02.16
Tensile Test Result :- Not Accepted TC No.: 77-YE/2016 Date: 11.02.2016

Identification U.T.S. Yield Point Elongation

Minimum Required 70000 psi 60000 psi 22.00%
Actual 94244 psi 77133 psi 19.20% Fail

Tensile Test Result :- Accepted TC No.: 270-YH/2016 Date: 24.02.2016

Identification U.T.S. Yield Point Elongation

Minimum Required 70000 psi 60000 psi 22.00%
Actual 93092 psi 71501 psi 30.00%
Actual 91968 psi 79523 psi 26.00%
C: Impact Test Result :- Accepted TC No.: 9-YA /2016 Date: 11.02.2016
Test Temperature : minus 20°C (-20°C)
Notch in : "V" Notch at weld
Type of Specimens : As per SFA 5.5
Size of Specimen: 10 x 10.00 mm

Specimen No. Impact Value Average Required Value

Weld 1 46 J
Average 27 J
Weld 2 44 J 42.67 J Individual 20 J
Weld 3 38 J
Weld 4 36 J
--
Weld 5 48 J

For Aneri Construction Pvt. Ltd. FOR ICS FOR IOAGPL

Name:

Sign:
 ELECTRODE QUALIFICATION TEST RECORD
ANERI CONSTRUCTION PVT. LTD.
A: Project : Daman City Gas Distribution Project
Tested at : Met-Heat Engineers,Vadodara.
Manufacturer's Name : Lincoln Electric
Brand Name Shield Arc HYP+
Batch Number & : 14245258
Size tested : 3.25mm
Classification & Code : E7010 AWS SFA - 5.5
Intended for welding
in position : 1G
In combination with : Nil
(If any)
Code of Reference : ASME Sec. II - C SFA 5.5
Date:
 ELECTRODE QUALIFICATION TEST RECORD
ANERI CONSTRUCTION PVT. LTD.
A: Project : Daman City Gas Distribution Project
Tested at : Met-Heat Engineers,Vadodara.
Manufacturer's Name : Lincoln Electric
Brand Name Shield Arc HYP+
Batch Number & : 14245258
Size tested : 3.25mm
Classification & Code : E7010 AWS SFA - 5.5
Intended for welding
in position : 1G
In combination with : Nil
(If any)
Code of Reference : ASME Sec. II - C SFA 5.5
D: Impact Test Result :- Accepted TC No.: 1-YB /2016 Date: 11.02.2016
Test Temperature : minus 30°C(-30°C)
Notch in : "V" Notch at weld

Type of Specimens : As per SFA 5.5

Size of Specimen: 10 x 10.00 mm

Specimen No. Impact Value Average Required Value

Weld 1 40 J
Average 27 J
Weld 2 34 J 36.67 J Individual 20 J
Weld 3 36 J
Weld 4 30 J
--
Weld 5 50 J

E: Chemical Analysis of Electrode

Certificate No.: 17-LC/2016 Date: 11.02.2016
OBTAINED VALUE %
% CARBON 0.198
% MANGANESE 0.647
% SILICON 0.215
% PHOSPHORUS 0.019
% SULPHUR 0.011
% NICKLE Nil
% CHROMIUM Nil
% MOLYBDENUM 0.239
% VANADIUM Nil

Remarks:- The above test results are meeting with Chemical requirements of SFA 5.5 GRADE -E -7010-P1: 2013
Specification

Destructive Testes at: Met Heat Engineers Pvt. Ltd.

Report No: 77-YE/2016,270-YH/2016,9-YA/2016,1-YB/2016 and 17-LC/2016

Date: 11.02.2016/24.02.2016
Note :- All the copies of Test Reports are attached which are conducted by Met - Heat Laboratory.
For Aneri Construction Pvt. Ltd. FOR ICS FOR IOAGPL

Name:

Sign:

Date:
 ELECTRODE QUALIFICATION TEST RECORD
ANERI CONSTRUCTION PVT. LTD.
A: Project : Daman City Gas Distribution Project
Tested at : Met-Heat Engineers,Vadodara.
Manufacturer's Name : Lincoln Electric
Brand Name Shield Arc HYP+
Batch Number & : 14468501
Size tested : 4.00mm
Classification & Code : E7010-P1 AWS SFA - 5.5
Intended for welding
in position : 1G
In combination with : Nil
(If any)
Code of Reference : ASME Sec. II - C SFA 5.5
(Used for Testing)
Special Requirement : Impact Test at -20°C & -30°C
(If any)

B: All-weld Tensile Test

Base Material Used : A-36

Pre. Heat Temp. : 100°C (Minimum)
As per SFA 5.5
Postweld Heat
: Nil
treatment details
Visual Examination OK
Radiographic
Examination Results OK Report No.: 01 & 02 Date: 24.02.16,10.03.16
Tensile Test Result :- Accepted TC No.: 225-YE/2016 Date: 19.03.2016

Identification Required U.T.S. Yield Point Elongation

_ Minimum 70000 psi 60000 psi 22.00%
225-YE Actual 85127 psi 70889 psi 22.80%

C: Impact Test Result :- Accepted TC No.: 6-YT /2016 Date: 19.03.2016

Test Temperature : minus 20°C (-20°C)
Notch in : "V" Notch at weld
Type of Specimens : As per SFA 5.5
Size of Specimen: 10 x 10.00 mm

Specimen No. Impact Value Average Required Value

Weld 1 92 J
Weld 2 92 J 91.33 J Average 27 J
Individual 20 J
Weld 3 90 J
Weld 4 88 J
--
Weld 5 100 J

For Aneri Construction Pvt. Ltd. FOR ICS FOR IOAGPL

Name:

Sign:

Date:
 ELECTRODE QUALIFICATION TEST RECORD
ANERI CONSTRUCTION PVT. LTD.
A: Project : Daman City Gas Distribution Project
Tested at : Met-Heat Engineers,Vadodara.
Manufacturer's Name : Lincoln Electric
Brand Name Shield Arc HYP+
Batch Number & : 14468501
Size tested : 4.00mm
Classification & Code : E7010-P1 AWS SFA - 5.5
Intended for welding
in position : 1G
In combination with : Nil
(If any)
Code of Reference : ASME Sec. II - C SFA 5.5
D: Impact Test Result :- Accepted TC No.: 7-YT /2016 Date: 19.03.2016
Test Temperature : minus 30°C(-30°C)
Notch in : "V" Notch at weld

Type of Specimens : As per SFA 5.5

Size of Specimen: 10 x 10.00 mm

Specimen No. Impact Value Average Required Value

Weld 1 60 J
Average 27 J
Weld 2 74 J 72.67 J Individual 20 J
Weld 3 84 J
Weld 4 54 J
--
Weld 5 88 J

E: Chemical Analysis of Electrode

Certificate No.: 125-LC/2016 Date: 19.03.2016
OBTAINED VALUE %
% CARBON 0.142
% MANGANESE 0.993
% SILICON 0.257
% PHOSPHORUS 0.014
% SULPHUR 0.002
% NICKLE 0.054
% CHROMIUM 0.061
% MOLYBDENUM 0.021
% VANADIUM Nil

Remarks:- The above test results are meeting with Chemical requirements of SFA 5.5 GRADE -E -7010-P1: 2013
Specification

Destructive Testes at: Met Heat Engineers Pvt. Ltd.

Report No: 225-YJ/2016,6-YT/2016,7-YT/2016 and 125-LC/2016

Date: 19.03.2016
Note :- All the copies of Test Reports are attached which are conducted by Met - Heat Laboratory.
For Aneri Construction Pvt. Ltd. FOR ICS FOR IOAGPL

Name:

Sign:

Date:
ANERI CONSTRUCTION PVT.LTD.
ELECTRODE QUALIFICATION TEST PARAMETER SHEET
PROJECT : Daman City Gas Distribution Project.
CLIENT : Indian Oil Adani Gas Pvt. Limited
TPIA : International Certification Services Pvt.Ltd. DATE:- 10.01.2016
ELECTRODE CLASSIFICATION : E7010-P1 Dia : 3.25mm LENGTH : 3.25mm X 350mm
BATCH NO : 14207286 WELDER : Anil Kumar Patel
BASE PLATE : IS 2062 E 250 (Fe 410 W) WELDER NO : 01
BACKING PLATE :
BUTTERING LAYER : NA
For Butt Welds
PLATE SIZE : 1) 300mm X 200mm (16 mm Thick)
2) 300mm X 200mm (16 mm Thick) PASSES PER LAYER: 02
PRE HEAT TEMP : 120° C ROOT GAP: 13mm
INCLUDED ANGLE: 20° ± 5°
POSITION : FLAT (1G)

LAYER CURRERNT VOLTAGE No. OF ELECTRODE REMARKS

65-73 28-30
LAYER-1 70-76 27-29 08
71-78 30-32
76-81 29-31
LAYER-2 79-86 30-32 08
85-91 27-31
83-88 29-32
LAYER-3 76-85 26-29 08
82-87 28-32
84-90 29-34
LAYER-4 76-89 30-35 09
85-91 31-34
87-92 30-31
LAYER-5 85-91 26-30 10
82-86 29-32
86-91 28-30
CAPPING 78-85 27-34 13
80.89 26-31
NOTE :
FOR ACPL FOR TPIA/ICS FOR IOAGPL

Sign:

Name:
Date:
ANERI CONSTRUCTION PVT.LTD.
ELECTRODE QUALIFICATION TEST PARAMETER SHEET
PROJECT : Daman City Gas Distribution Project.
CLIENT : Indian Oil Adani Gas Pvt. Limited
TPIA : International Certification Services Pvt.Ltd. DATE:- 22.01.2016
ELECTRODE CLASSIFICATION : E7010-P1 Dia : 3.25mm LENGTH : 3.25mm X 350mm
BATCH NO : 14207286 WELDER : Laxman Mahto
BASE PLATE : IS 2062 E 250 (Fe 410 W) WELDER NO :-
BACKING PLATE :
BUTTERING LAYER : NA
For Butt Welds
PLATE SIZE : 1) 300mm X 200mm (16 mm Thick)
2) 300mm X 200mm (16 mm Thick) PASSES PER LAYER: 02
PRE HEAT TEMP : 122° C ROOT GAP: 13mm
COUPON No:- 01 INCLUDED ANGLE: 20° ± 5°
POSITION : FLAT (1G)

LAYER CURRERNT VOLTAGE No. OF ELECTRODE REMARKS

82-85 25-27
LAYER-1 84-88 28-30 10
85-89 27-32
90-93 28-31
LAYER-2 92-96 29-33 12
95-100 30-32
85-90 27-27
LAYER-3 87-92 28-31 9
89-95 26-30
83-87 28-33
LAYER-4 86-92 30-32 10
90-96 29-31
84-87 26-28
LAYER-5 82-85 27-30 9
82-85 26-29
80-88 27-29
CAPPING 83-89 26-28 8
82-86 29-31
NOTE :
FOR ACPL FOR TPIA/ICS FOR IOAGPL

Sign:

Name:
Date:
ANERI CONSTRUCTION PVT.LTD.
ELECTRODE QUALIFICATION TEST PARAMETER SHEET
PROJECT : Daman City Gas Distribution Project.
CLIENT : Indian Oil Adani Gas Pvt. Limited
TPIA : International Certification Services Pvt.Ltd. DATE:- 23.01.2016
ELECTRODE CLASSIFICATION : E7010-P1 Dia : 3.25mm LENGTH : 3.25mm X 350mm
BATCH NO : 14207286 WELDER : Laxman Mahto
BASE PLATE : IS 2062 E 250 (Fe 410 W) WELDER NO :-
BACKING PLATE :
BUTTERING LAYER : NA
For Butt Welds
PLATE SIZE : 1) 300mm X 200mm (16 mm Thick)
2) 300mm X 200mm (16 mm Thick) PASSES PER LAYER: 02
PRE HEAT TEMP : 122° C ROOT GAP: 13mm
COUPON No:- 02 INCLUDED ANGLE: 20° ± 5°
POSITION : FLAT (1G)

LAYER CURRERNT VOLTAGE No. OF ELECTRODE REMARKS

84-89 28-30
LAYER-1 87-95 29-32 10
90-98 30-33
92-96 29-31
LAYER-2 93-98 28-32 12
96-100 30-34
84-86 27-29
LAYER-3 87-90 29-31 10
91-96 30-33
93-98 26-30
LAYER-4 90-96 25-28 9
86-89 27-29
96-101 29-32
LAYER-5 98-103 30-33 9
93-98 27-30
86-89 28-30
CAPPING 88-90 27-31 9
92-98 30-32
NOTE :
FOR ACPL FOR TPIA/ICS FOR IOAGPL

Sign:

Name:
Date:
ANERI CONSTRUCTION PVT.LTD.
ELECTRODE QUALIFICATION TEST PARAMETER SHEET
PROJECT : Daman City Gas Distribution Project.
CLIENT : Indian Oil Adani Gas Pvt. Limited
TPIA : International Certification Services Pvt.Ltd. DATE:- 11.01.2016
ELECTRODE CLASSIFICATION : E6010 Dia : 2.5mm LENGTH : 2.5mm X .350mm
BATCH NO : 14207387 WELDER : Anil Kumar Patel
BASE PLATE : IS 2062 E 250 (Fe 410 W) WELDER NO : 01
BACKING PLATE :
BUTTERING LAYER : NA
For Butt Welds
PLATE SIZE : 1) 300mm X 200mm (16 mm Thick)
2) 300mm X 200mm (16 mm Thick) PASSES PER LAYER: 02
PRE HEAT TEMP : 118° C ROOT GAP: 10mm
INCLUDED ANGLE: 20° ± 5°
POSITION : FLAT (1G)

LAYER CURRERNT VOLTAGE No. OF ELECTRODE REMARKS

60-68 32-34
LAYER-1 72-78 27-29 11
70-76 29-33
58-60 28-30
LAYER-2 60-66 27-29 12
68-78 29-33
72-76 30-32
LAYER-3 71-75 28-30 14
60-72 29-33
65-70 28-30
LAYER-4 72-76 30-32 14
70-74 32-34
70-76 29-33
LAYER-5 68-74 33-35 15
65-76 28-30
72-74 30-32
LAYER-6 70-76 29-33 15
68-72 28-30
67-76 28-30
LAYER-7 72-78 29-31 15
70-74 32-34
70-76 30-32
CAPPING 66-78 28-30 15
72-78 29-33
NOTE :
FOR ACPL FOR TPIA/ICS FOR IOAGPL

Sign:

Name:
Date:
ANERI CONSTRUCTION PVT.LTD.
ELECTRODE QUALIFICATION TEST PARAMETER SHEET
PROJECT : Daman City Gas Distribution Project.
CLIENT : Indian Oil Adani Gas Pvt. Limited
TPIA : International Certification Services Pvt.Ltd. DATE:- 22.01.2016
ELECTRODE CLASSIFICATION : E6010 Dia : 2.5mm LENGTH : 2.5mm X .350mm
BATCH NO : 14207387 WELDER : Laxman Mahto
BASE PLATE : IS 2062 E 250 (Fe 410 W) WELDER NO : -
BACKING PLATE :
BUTTERING LAYER : NA
For Butt Welds
PLATE SIZE : 1) 300mm X 200mm (16 mm Thick)
2) 300mm X 200mm (16 mm Thick) PASSES PER LAYER: 02
PRE HEAT TEMP : 118° C ROOT GAP: 13mm
COUPON No:- 01 INCLUDED ANGLE: 20° ± 5°
POSITION : FLAT (1G)

LAYER CURRERNT VOLTAGE No. OF ELECTRODE REMARKS

60-63 24-26
LAYER-1 60-64 26-28 20
65-70 27-29
68-73 26-30
LAYER-2 69-76 29-34 13
70-77 30-35
64-68 28-31
LAYER-3 65-70 29-33 13
67-72 30-34
61-65 26-30
LAYER-4 63-67 27-31 11
65-70 29-34
64-66 26-29
LAYER-5 65-68 28-30 12
66-70 29-31
61-64 26-29
LAYER-6 63-67 27-30 12
64-69 28-32
62-65 24-28
CAPPING 64-67 25-29 12
65-70 27-30
NOTE :
FOR ACPL FOR TPIA/ICS FOR IOAGPL

Sign:

Name:

Date:
ANERI CONSTRUCTION PVT.LTD.
ELECTRODE QUALIFICATION TEST PARAMETER SHEET
PROJECT : Daman City Gas Distribution Project.
CLIENT : Indian Oil Adani Gas Pvt. Limited
TPIA : International Certification Services Pvt.Ltd. DATE:- 23.01.2016
ELECTRODE CLASSIFICATION : E6010 Dia : 2.5mm LENGTH : 2.5mm X .350mm
BATCH NO : 14207387 WELDER : Laxman Mahto
BASE PLATE : IS 2062 E 250 (Fe 410 W) WELDER NO : -
BACKING PLATE :
BUTTERING LAYER : NA
For Butt Welds
PLATE SIZE : 1) 300mm X 200mm (16 mm Thick)
2) 300mm X 200mm (16 mm Thick) PASSES PER LAYER: 02
PRE HEAT TEMP : 116° C ROOT GAP: 13mm
COUPON No:- 02 INCLUDED ANGLE: 20° ± 5°
POSITION : FLAT (1G)

LAYER CURRERNT VOLTAGE No. OF ELECTRODE REMARKS

60-63 24-26
LAYER-1 62-64 26-28 16
61-66 27-29
61-64 26-30
LAYER-2 60-65 29-34 10
62-67 30-35
63-65 28-31
LAYER-3 62-66 29-33 13
60-64 30-34
64-67 26-30
LAYER-4 60-63 27-31 15
61-65 29-34
63-68 26-29
LAYER-5 65-69 28-30 15
62-66 29-31
61-64 26-29
LAYER-6 63-66 27-30 12
66-70 28-32
61-64 24-28
CAPPING 63-67 25-29 14
64-69 27-30
NOTE :
FOR ACPL FOR TPIA/ICS FOR IOAGPL

Sign:

Name:
Date:
ANERI CONSTRUCTION PVT.LTD.
ELECTRODE QUALIFICATION TEST PARAMETER SHEET
PROJECT : Daman City Gas Distribution Project.
CLIENT : Indian Oil Adani Gas Pvt. Limited
TPIA : International Certification Services Pvt.Ltd. DATE:- 16.02.2016
ELECTRODE CLASSIFICATION : E7010-P1 Dia : 3.25mm LENGTH : 3.25mm X 350mm
BATCH NO : 14245258 WELDER : Anil Singh
BASE PLATE : IS 2062 E 250 (Fe 410 W) WELDER NO :-
BACKING PLATE :
BUTTERING LAYER : NA
For Butt Welds
PLATE SIZE : 1) 200mm X 200mm (16 mm Thick)
2) 200mm X 200mm (16 mm Thick) PASSES PER LAYER: 02
PRE HEAT TEMP : 100° C ROOT GAP: 13mm
COUPON No:- EQT-01 INCLUDED ANGLE: 20° ± 5°
POSITION : FLAT (1G)

LAYER CURRERNT VOLTAGE No. OF ELECTRODE REMARKS

102-106 28-30
LAYER-1 6
102-106 28-30
102-106 28-30
LAYER-2 6
102-106 28-30
102-106 28-30
LAYER-3 7
102-106 28-30
102-106 28-30
LAYER-4 6
102-106 28-30
102-106 28-30
LAYER-5 7
102-106 28-30
102-106 28-30
LAYER-6 6
102-106 28-30
102-106 28-30
LAYER-7 11
102-106 28-30
NOTE :
FOR ACPL FOR TPIA/ICS FOR IOAGPL

Sign:

Name:

Date:
ANERI CONSTRUCTION PVT.LTD.
ELECTRODE QUALIFICATION TEST PARAMETER SHEET
PROJECT : Daman City Gas Distribution Project.
CLIENT : Indian Oil Adani Gas Pvt. Limited
TPIA : International Certification Services Pvt.Ltd. DATE:- 16.02.2016
ELECTRODE CLASSIFICATION : E7010-P1 Dia : 3.25mm LENGTH : 3.25mm X 350mm
BATCH NO : 14245258 WELDER : Anil Singh
BASE PLATE : IS 2062 E 250 (Fe 410 W) WELDER NO :-
BACKING PLATE :
BUTTERING LAYER : NA
For Butt Welds
PLATE SIZE : 1) 200mm X 200mm (16 mm Thick)
2) 200mm X 200mm (16 mm Thick) PASSES PER LAYER: 02
PRE HEAT TEMP : 100° C ROOT GAP: 13mm
COUPON No:- EQT-02 INCLUDED ANGLE: 20° ± 5°
POSITION : FLAT (1G)

LAYER CURRERNT VOLTAGE No. OF ELECTRODE REMARKS

104-108 28-30
LAYER-1 6
104-108 28-30
104-108 28-30
LAYER-2 6
104-108 28-30
104-108 28-30
LAYER-3 7
104-108 28-30
104-108 28-30
LAYER-4 6
104-108 28-30
104-108 28-30
LAYER-5 6
104-108 28-30
104-108 28-30
LAYER-6 7
104-108 28-30
104-108 28-30
LAYER-7 11
104-108 28-30
NOTE :
FOR ACPL FOR TPIA/ICS FOR IOAGPL

Sign:

Name:

Date:
ANERI CONSTRUCTION PVT.LTD.
ELECTRODE QUALIFICATION TEST PARAMETER SHEET
PROJECT : Daman City Gas Distribution Project.
CLIENT : Indian Oil Adani Gas Pvt. Limited
TPIA : International Certification Services Pvt.Ltd. DATE:- 23.02.2016
ELECTRODE CLASSIFICATION : E7010-P1 Dia : 4.00mm LENGTH : 4.00mm X 350mm
BATCH NO : 14468501 WELDER : Anil Singh
BASE PLATE : IS 2062 E 250 (Fe 410 W) WELDER NO :-
BACKING PLATE :
BUTTERING LAYER : NA
For Butt Welds
PLATE SIZE : 1) 250mm X 200mm (20 mm Thick)
2) 250mm X 200mm (20 mm Thick) PASSES PER LAYER: 02
PRE HEAT TEMP : 100° C ROOT GAP: 16mm
COUPON No:- 01 INCLUDED ANGLE: 20° ± 5°
POSITION : FLAT (1G)

LAYER CURRERNT VOLTAGE No. OF ELECTRODE REMARKS

120-126 30-32
LAYER-1 8
120-126 30-32
120-126 30-32
LAYER-2 8
120-126 30-32
120-126 30-32
LAYER-3 8
120-126 30-32
120-126 30-32
LAYER-4 8
120-126 30-32
120-126 30-32
LAYER-5 8
120-126 30-32
120-126 30-32
LAYER-6 9
120-126 30-32
120-126 30-32
LAYER-7 9
120-126 30-32
120-126 30-32
LAYER-8 8
120-126 30-32
120-126 30-32
LAYER-9 12
120-126 30-32
NOTE :
FOR ACPL FOR TPIA/ICS FOR IOAGPL

Sign:

Name:
Date:
ANERI CONSTRUCTION PVT.LTD.
ELECTRODE QUALIFICATION TEST PARAMETER SHEET
PROJECT : Daman City Gas Distribution Project.
CLIENT : Indian Oil Adani Gas Pvt. Limited
TPIA : International Certification Services Pvt.Ltd. DATE:- 06.03.2016
ELECTRODE CLASSIFICATION : E7010-P1 Dia : 4.00mm LENGTH : 4.00mm X 350mm
BATCH NO : 14468501 WELDER : Anil Patel
BASE PLATE : IS 2062 E 250 (Fe 410 W) WELDER NO :- 01
BACKING PLATE :
BUTTERING LAYER : NA
For Butt Welds
PLATE SIZE : 1) 300mm X 200mm (20 mm Thick)
2) 300mm X 200mm (20 mm Thick) PASSES PER LAYER: 02
PRE HEAT TEMP : 100° C ROOT GAP: 16mm
COUPON No:- 02 INCLUDED ANGLE: 20° ± 5°
POSITION : FLAT (1G)

LAYER CURRERNT VOLTAGE No. OF ELECTRODE REMARKS

120-128 29-31
LAYER-1 8
120-128 29-31
120-128 29-31
LAYER-2 8
120-128 29-31
120-128 29-31
LAYER-3 8
120-128 29-31
120-128 29-31
LAYER-4 9
120-128 29-31
120-128 29-31
LAYER-5 8
120-128 29-31
120-128 29-31
LAYER-6 9
120-128 29-31
120-128 29-31
LAYER-7 9
120-128 29-31
120-128 29-31
LAYER-8 8
120-128 29-31
120-128 29-31
LAYER-9 14
120-128 29-31
NOTE :
FOR ACPL FOR TPIA/ICS FOR IOAGPL

Sign:

Name:
Date: