Scribd Logo
Upload

Welcome to Scribd!

  • 212 views

    GK-42 Photoelectric Correction Controller Instruction: One. Summary

    Uploaded by

    Pratik Tapadia
    This document provides instructions for the GK-42 Photoelectric Correction Controller. The controller uses a single-chip microcomputer for centralized control and rubber keys for long service life. It can select single or double eye correction and adjust the correction response speed. The controller is used to correct deviations in paper, film and other materials using a photoelectric eye and correction actuator. It can be widely used in cutting machines, printing machines and other mechanical equipment.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    GK-42 Photoelectric Correction Controller Instruction: One. Summary

    Uploaded by

    Pratik Tapadia
    212 views3 pages
    This document provides instructions for the GK-42 Photoelectric Correction Controller. The controller uses a single-chip microcomputer for centralized control and rubber keys for long service life. It can select single or double eye correction and adjust the correction response speed. The controller is used to correct deviations in paper, film and other materials using a photoelectric eye and correction actuator. It can be widely used in cutting machines, printing machines and other mechanical equipment.

    Original Title

    Untitled

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for the GK-42 Photoelectric Correction Controller. The controller uses a single-chip microcomputer for centralized control and rubber keys for long service life. It can select single or double eye correction and adjust the correction response speed. The controller is used to correct deviations in paper, film and other materials using a photoelectric eye and correction actuator. It can be widely used in cutting machines, printing machines and other mechanical equipment.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    212 views3 pages

    GK-42 Photoelectric Correction Controller Instruction: One. Summary

    Uploaded by

    Pratik Tapadia
    This document provides instructions for the GK-42 Photoelectric Correction Controller. The controller uses a single-chip microcomputer for centralized control and rubber keys for long service life. It can select single or double eye correction and adjust the correction response speed. The controller is used to correct deviations in paper, film and other materials using a photoelectric eye and correction actuator. It can be widely used in cutting machines, printing machines and other mechanical equipment.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    GK-42 Photoelectric Correction Controller Instruction

    One. Summary
    The core of the correction controller adopts the advanced single chip
    microcomputer for centralized control, and the control panel adopts rubber
    keys with long service life. The controller can select single eye and double
    eye to correct deviation, and the response speed of correction can be set to
    effectively reduce the vibration and noise caused by correction. The correction
    controller can control the correction of paper, film and other materials with
    correction actuator and photoelectric eye, and can be widely used in cutting
    machine, printing machine and other mechanical equipment.

    Two. Exterior dimensions and panel drawings:

    GK-42 光 电 纠 偏 控 制 器
    GK- 42 EPC CONTROLLER
    96.8 mm

    速 度

    92 mm
    SPEED

    电 眼 极 性 模 式
    ELECT.EYE POLE GENDER MODE

    96.8 mm 68 mm 92 mm

    Three. Main parameters:

    Correction Response Speed 1MS-100MS


    Correctional Accuracy Optoelectronic eye
    Optoelectronic interface 2nd (12 V/NPN)
    Limit Switch Interface Left and right limit switches (12 V/NPN)
    External Extension Interface Manual/automatic; point left; point right
    Correction Output Drive AC synchronous motor correction actuator (220 V synchronous motor)
    Working voltage Communication V/50HZ 220
    Four. Operating panel instructions:

    GK-42 光 电 纠 偏 控 制 器
    GK- 42 EPC CONTROLLER
    1 3

    2
    速 度
    6 SPEED 4
    5 7

    电 眼 极 性 模 式
    ELECT.EYE POLE GENDER MODE

    8 10 11 12 9

    1 Correction output indication: this direction light indicates the output. State of
    deviation correction, that is, positive or reverse correction motor.
    2 Limit indicator: this indicator light indicates that the correction actuator has
    moved to the limit position.
    3 Correction response speed: display correction response speed 0-9, 9 is the
    fastest.
    4 Response speed adjustment button: press the two keys to adjust the response
    speed of correction.
    5 Eye selection indicator: displays the current selected working mode of the
    rectifying controller.
    6 Polarity selection indicator: displays the polarity currently selected by the
    correction controller, that is, bright action or dark action.
    7 Mode selection indicator: displays the correction controller currently selected
    in automatic mode or manual mode.
    8 To the left click button: press the button to make the controller to the left
    correction output.
    9 Point to the right button: press the button to correct the controller to the right
    output.
    10 Eye selection button: press the button to select the single eye or double eye
    working mode, the user according to the material reasonable choice, at the
    same time The indicator 5 indicates the current state.
    11 Polarity selection button: press this button to switch correction polarity, that is,
    change the output direction of correction motor. At the same time, the indicator
    6 indicates the current state.

    12 Mode selection button: press this button to select the controller automatic
    correction mode or manual mode at the same time The indicator 7 indicates
    the current state.
    Five. Wiring diagrams:

    Right

    manual/auto
    Limit alarm
    Buzzer
    Left
    Synchronous motor
    Limit alarm limit switch
    R

    Relay
    limit switch
    C

    sensor
    220V power

    sensor

    Five. Wiring diagrams:

    Limit range adjustment

    PUSH Fixed

    Rectifying motor Motor and Limit port


    Fixed

    （END）

    You might also like