Machine Translated by Google

U-channels
QUALITY: ASTM A36
QUALITY: ASTM A36/A572 - G50

*Referential images.
Machine Translated by Google

U-channels
QUALITY: ASTM A36
QUALITY: ASTM A36/A572 - G50

DENOMINATION: DESIGNATION NOMINAL THICKNESS

NOMINAL AREA WEB WING
C(U) A36. (mm)
in.2 BASE (A) (B) in.
C(U) DUAL A36/A572 – G50. in.
BASE/SOUL
in. lb/ft WING (tw)

9" 8:00 p.m. 5.88 9.00 2.65 10.49 (tf )

DESCRIPTION:
10" 3:30 p.m. 4.49 10.00 2.60 11.07 11.38 6.10
Hot-rolled product with a “U”-shaped section (with parallel wings), of structural 10" 20.00 5.88 10.00 2.74 11.07 9.63

quality and high-strength structural quality because it complies with ASTM A36 10" 25.00 7.35 10.00 2.89 11.07 13.36
10" 30.00 8.82 10.00 3.03 11.07 17.09
and ASTM A36/A572 (DUAL) standards simultaneously.
12" 20.70 6.09 12.00 2.94 12.73 7.16
12" 25.00 7.35 12.00 3.05 12.73 9.83
12" 30.00 8.82 12.00 3.17 12.73 12.95
USES: 15" 33.90 9.96 15.00 3.40 16.51 10.16
In the manufacture of metal structures, large doors, bars and larger fences, etc. 15" 40.00 11.80 15.00 3.52 16.51 13.21
15" 50.00 14.70 15.00 3.72 16.51 18.19

(1) Dimension corresponding to ASTM A36/A572 (DUAL) grade (tf )

TECHNICAL Actual flange and web thicknesses vary according to rolling mill practices; however, no
tolerances have been established for such dimensions.
STANDARDS: · Chemical Composition and Mechanical Properties: ASTM A36/ - The weight tolerance is -2.5% /+3.0% of the nominal weight.
A36M, ASTM A572/A572M, NTP 350.400 and NTP 350.407 · Dimensional
Tolerance: ASTM A6 /A6M and NTP 241.105 CHEMICAL COMPOSITION (%):
%C max %Mn max %Si max %P max %S max Type 1 %Nb Type 2 %V
PRESENTATION:
0.23 1.35 0.40 0.04 0.05 0.005 - 0.050 0.01 - 0.15
It is marketed in bars of 6 meters in length. Supplied in packages of 1 t.

MECHANICAL PROPERTIES:
STANDARD DIMENSIONS:
ACCORDING TO ASTM A36
DESIGNATION NOMINAL THICKNESS
AREA WEB • Yield Limit = 400 - 550 MPa (40.8
= 250
– 56.2
MPakg/mm²).
(25.5 kg/mm²)
• Tensile
minimum.
NOMINAL WING (mm)
in.2 BASE (A) (B) in. 20.0% minimum. Strength • Elongation in 200 mm: =
BASE/SOUL
in. lb/ft in. WING (tw)
(tf )
two" 2.58 0.76 2.00 1.00 4.75 4.75
3” 4.10 1.21 3.00 1.41 6.93 4.32
ACCORDING TO ASTM A36/A572 (DUAL)
3” 5.00 1.47 3.00 1.50 6.93 6.55
3” 6.00 1.76 3.00 1.60 6.93 9.04 Yield Limit = 450 – 550 MPa (45.9 –= 56.2
345 MPa
kg/mm²).
(35.2 kg/mm²) minimum. •
4" 4.50 1.32 4.00 1.58 7.52 3.18
• Tensile strength
4" 5.40 1.59 4.00 1.58 7.52 4.67 • Elongation in 200 mm: = 20.0% minimum.
4” 7.25 2.13 4.00 1.72 7.52 8.15
5" 6.70 1.97 5.00 1.75 8.13 4.83
5" 9.00 2.64 5.00 1.89 8.13 8.26
6" 8.20 2.40 6.00 1.92 8.71 5.08
6" 10.50 3.09 6.00 2.03 8.71 7.98
6" 13.00 3.83 6.00 2.16 8.71 11.10 A
you

7" 9.80 2.87 7.00 2.09 9.30 5.33

7" 12.25 3.60 7.00 2.19 9.30 7.98
7" 14.75 4.33 7.00 2.30 9.30 10.64
8" 11.50 3.38 8.00 2.26 9.91 5.59
8" 13.75 4.04 8.00 2.34 9.91 7.70
8" 18.75 5.51 8.00 2.53 9.91 12.37
9" 13.40 3.94 9.00 2.43 10.49 5.92 B.

9" 15.00 4.41 9.00 2.49 10.49 7.24

QCQA01-F115/04/JUL 21

Previous agreement is marketed in other measures.

Machine Translated by Google

U-channels
QUALITY: ASTM A36
QUALITY: ASTM A36/A572 - G50

TOLERANCES:

HEIGHT WIDTH (B) TOLERANCES ABOVE OR

T + T'(A),
BELOW THE THICKNESS OF THE WEB DEVIATION
NOMINAL SECTION (A) (in.) (in.) OUTSIDE THEORETICAL FOR THICKNESSES MAXIMUM OF LENGTH
DIMENSIONS (in.)
BY BY BY BY SQUARE (mm)
OVER UNDER OVER UNDER OR WING(B) STRAIGHTNESS (mm/m)
3/16 UNLESS MORE THAN 3/16
THEORETICAL THEORETICAL THEORETICAL THEORETICAL

Less than or equal to 1 1/2 1/32 1/32 1/32 1/32 1/32 0.010 0.015

More than 1 1/2 to less than 3 1/16 1/16 1/16 1/16 1/32 0.015 0.020

+50
3 to 7 inclusive 3/32 1/16 1/8 1/8 1/32 - - 4.1
-0

More than 7 to 14 , inclusive 1/8 3/32 1/8 5/32 1/32 - -

over 14 3/16 1/8 1/8 3/16 1/32 - -

(A) T + T' applies when channel wings are indicated in or out. For 5/8 in. channels and less in height, the allowable out-of-square value is 3/64 inches in height.
(B) Tolerance is per inch of web width.

ID:
The channels are identified with stamped marks that indicate the manufacturer, the nominal dimensions and the Standards, according to the following scheme:

C 2" x 2.58 Lbs/ft A 36/A572 - G50

MAKER U-CHANNEL DOUGH RULES

HEIGHT

U channel marking dimensions come up to 4”.

QCQA01-F115/04/JUL 21

PERU COLOMBIA
LIMA: Av. Antonio Miró Quesada No. 425, 17th floor, Magdalena del Mar. CALI: Cra. 25, No. 13-117, Yumbo, La Y Industrial Plot, Valle del
Tel. (51-01) 517 1800. Cauca-Colombia.
PISCO: Panamericana Sur, Km. 241, Ica. Tel. (51-056) 58 0830. Phone (57) 324 4214893.
AREQUIPA: Variant of Uchumayo Km 5.5, Cerro Colorado, Arequipa. E-mail: [email protected]
Tel. (51-01) 517 1800.
CHILE
BOLIVIA ANTOFAGASTA: Route A-26 KM 2.4, El Salar. Phone: (56) 939249279.
LA PAZ: E Street - Lot 14, Manzano A-08, Cervecería E-mail: [email protected]
Boliviana Nacional Urbanization - Bellavista Viacha.
Phone (591) 75555819/77641658.
SANTA CRUZ: Urb. Latin American Industrial Park, Industrial
Unit UI 06, Mz. 1, lot 4 - Warnes.
Phone (591) 75555819/77641656.
COCHABAMBA: Tte. Monasteries S/N La Maica Zone - Cochabamba.
Phone (591) 75555819/69417963. E-mail: [email protected]

Find us in: www.acerosarequipa.com