Scribd
Upload
2K views3 pages

How To Adjust Parameter LBMC GUI User Manual V1.2

The document provides instructions for using FOC Config Software to configure parameters for an FOC controller. It describes the software interface, which includes a tree list of parameter groups on the left and a form to view and edit parameters on the right. It then explains each step of the operation process, which involves connecting the software to the controller, uploading/downloading parameter values, saving settings permanently to the controller, restoring default settings, importing/exporting parameter files, and switching the language. Screenshots illustrate the software interface and help information for parameters.

Uploaded by

captain
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views3 pages

How To Adjust Parameter LBMC GUI User Manual V1.2

The document provides instructions for using FOC Config Software to configure parameters for an FOC controller. It describes the software interface, which includes a tree list of parameter groups on the left and a form to view and edit parameters on the right. It then explains each step of the operation process, which involves connecting the software to the controller, uploading/downloading parameter values, saving settings permanently to the controller, restoring default settings, importing/exporting parameter files, and switching the language. Screenshots illustrate the software interface and help information for parameters.

Uploaded by

captain
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

无锡市凌博电气驱动技术有限公司

Wuxi Lingbo Electric Driving Technologies Co.,Ltd.

FOC Config Software Operation Manual


一、 Software interface：
Run “LBMC GUI V2.1.2 ” software，shown as below picture：

On the left is a tree list, it shows setting parameters of each group for FOC controller.

On the right is the sidebar of software.

Right below is the form of displaying setting parameters of FOC controller.


The first column on left shows each grouping of setting parameters.
The second column on left shows specific names of setting parameters.
The third column on left shows the values of setting parameters.

二、 Operation manual：

First，when you select the appropriate PC serial port on column ，the


software will record the PC serial port.

Later, click the icon of “connect controller” ，establish the connection between PC

side and FOC controller, and upload the parameters of FOC controller.

Next, click the icon of “upload from controller” to upload the parameters of FOC

controller into PC software.

Add：Building 10, Jiaotong University Creative Park, No.59 Xiuxi Road,Binhu District, Wuxi, PR China
Tel：0510-66078681 Fx：0510-66078677
无锡市凌博电气驱动技术有限公司
Wuxi Lingbo Electric Driving Technologies Co.,Ltd.

Then click the icon of “download to controller” to download the parameters in PC

side software into FOC controller.

After that, click the icon of “save to controller” to make the FOC controller

parameters for permanent storage.

Attention：All the changes including “download to controller”, “restore


defaults”,etc., can be permanently saved only after this operation, otherwise they’ll
be lost after power on again.

If you don’t do this, after power on, the parameters of FOC controller will revert to
the last saved value permanently.

Next, click the icon of “restore defaults” to restore the parameters of FOC

controller to the factory default settings.

Later, click the icon of “import from file” to import the parameter files saved on

computer into the PC software.

Click the icon of “export to file” to export the parameters of PC software into the

files in computer.

Click the icon of “switch language” to switch the living language of software.

When you click the sidebar on the left tree list, the right form will appear in corresponding
position automatically, shown as below picture :

Add：Building 10, Jiaotong University Creative Park, No.59 Xiuxi Road,Binhu District, Wuxi, PR China
Tel：0510-66078681 Fx：0510-66078677
无锡市凌博电气驱动技术有限公司
Wuxi Lingbo Electric Driving Technologies Co.,Ltd.

After you click the parameters form names on right, there’ll be one hanging box to show
the specific nature of parameters and value ranges, please see it on below picture.

Add：Building 10, Jiaotong University Creative Park, No.59 Xiuxi Road,Binhu District, Wuxi, PR China
Tel：0510-66078681 Fx：0510-66078677

You might also like