Castrol Magnatec 5W-40 C3

Product Data
Castrol Magnatec 5W-40 C3

Instant protection from the moment you turn the key.
Description
Up to 75% of engine wear happens while your engine warms up. When the engine stops oils drain off critical engine parts, however Castrol
Magnatec’s intelligent molecules don’t, they cling to the engine like a magnet providing an extra layer of protection ready to protect from
the moment you turn the key.
Castrol Magnatec’s molecules are always there, always ready, dramatically reducing** engine wear when the most damage happens; as
your car warms up.
Castrol Magnatec. Instant protection from the moment you turn the key.
**As tested against the industry Sequence IVA wear test
Application
Castrol Magnatec 5W-40 C3 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA
C3, API SN/CF or earlier specification 5W-40 lubricant.
Castrol Magnatec 5W-40 C3 is approved for use in a vehicles from a wide range of manufacturers, please refer to the specifications section
and your vehicle handbook.
Castrol Magnatec 5W-40 C3 has been specially formulated to deliver outstanding protection for the latest engines fitted with after treatment
devices such as diesel particulate filters and 3 way catalysts
Castrol Magnatec 5W-40 C3 is approved to *GM dexos2®: supersedes GM-LL-B-025 and GM-LL-A-025 License number (GB2D0115082).
Advantages
Castrol Magnatec’s Intelligent Molecules:
- Cling to critical engine parts when the oil drains down
- Cling to your engine forming an extra layer that protects during start up and beyond;
- Bond to metal surfaces to make engine parts more resistant to wear;
- Are combined with synthetic technology to provide increased protection in high and low temperature applications;
- Provide continuous protection for all driving conditions, styles and temperatures;
Castrol Magnatec 5W-40 C3 delivers superior performance under extreme cold start up conditions
Page: 1/2
Typical Characteristics
Name Method Units Castrol Magnatec 5W-40 C3
Density @ 15°C, Relative ASTM D4052 g/ml 0.85
Viscosity, Kinematic 100°C ASTM D445 mm²/s 13.4
Viscosity, CCS -30°C (5W) ASTM D5293 mPa.s (cP) 6220
Viscosity, Kinematic 40°C ASTM D445 mm²/s 81
Viscosity Index ASTM D2270 None 169
Pour Point ASTM D97 °C -45
Flash Point, PMCC ASTM D93 °C 207
Ash, Sulphated ASTM D874 % wt 0.8
removal of A/B specifications as per ACEA 2010 and add dexos information
Product Performance Claims

ACEA C3
API SN/CF
BMW Longlife-04
Dexos 2*
Meets Fiat 9.55535-S2
MB-Approval 229.31
Renault RN 0700 / RN 0710
VW 502 00/ 505 00
Storage
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to
avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, exposed
to hot sun or freezing conditions.
Castrol Magnatec 5W-40 C3

04 Sep 2015
Castrol, the Castrol logo and related marks are trademarks of Castrol Limited, used under licence.
This data sheet and the information it contains is believed to be accurate as of the date of printing. However, no warranty or representation, express or implied, is
made as to its accuracy or completeness. Data provided is based on standard tests under laboratory conditions and is given as a guide only. Users are advised
to ensure that they refer to the latest version of this data sheet. It is the responsibility of the user to evaluate and use products safely, to assess suitability for the
intended application and to comply with all applicable laws and regulations. Material Safety Data Sheets are available for all our products and should be
consulted for appropriate information regarding storage, safe handling, and disposal of the product. No responsibility is taken by either BP plc or its subsidiaries
for any damage or injury resulting from abnormal use of the material, from any failure to adhere to recommendations, or from hazards inherent in the nature of the
material. All products, services and information supplied are provided under our standard conditions of sale. You should consult our local representative if you
require any further information.
Castrol (UK) Limited, PO BOX 354, Chertsey Road, Sunbury On Thames, Middlesex, TW16 9AW
Orders/Enquiries: 0345 6008125 Technical Enquiries: 0345 082 1719 BP (Ireland) Ireland Orders/Enquiries: 1850 930 3942 Ireland Technical Enquiries: 1800
509 353
www.castrol.com/uk
Page: 2/2

Castrol Magnatec 5W-40 C3

Uploaded by

Copyright:

Available Formats

Castrol Magnatec 5W-40 C3

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Castrol Magnatec 5W-40 C3

Uploaded by

Copyright:

Available Formats

Product Data

Castrol Magnatec 5W-40 C3

Density @ 15°C, Relative ASTM D4052 g/ml 0.85

Viscosity, Kinematic 100°C ASTM D445 mm²/s 13.4

Viscosity, CCS -30°C (5W) ASTM D5293 mPa.s (cP) 6220

Viscosity, Kinematic 40°C ASTM D445 mm²/s 81

Viscosity Index ASTM D2270 None 169

Pour Point ASTM D97 °C -45

Flash Point, PMCC ASTM D93 °C 207

Ash, Sulphated ASTM D874 % wt 0.8

Product Performance Claims

Castrol Magnatec 5W-40 C3

You might also like