FBs-4A2D

Analog A/D&D/A Combo Module

Specification
Analog Input
Total Channels - 6 CH
Resolution- 14 or 12 bit
Signal Resolution - 0.3mV(Voltage), 0.61uA(Current)
I/O Points Occupied - 6 RI(Input Register)
Conversion Time- Updated each scan
Accuracy- ±1 %
Max. Absolute Input Rating-
±15V(Voltage), 30mA(Current)
Software Filter- Moving average
Average Samples- 1~16 configurable
Input Impedance- 63.2KΩ(Voltage), 250Ω(Current)
Measurement Range-
Introduction -10~+10V, -5~+5V, 0~10V, 0~5V
FBs-4A2D is one of the analog I/O modules
-20~+20mA, -10~+10mA, 0~20mA, 0~10mA
of FATEK FBs series PLC. For analog output
it provides 2 channels of 14 bit D/A output. Analog Output
Base on the different jumper settings it can
Total Channels –2 Channels
provide varieties of current or voltage output
signal. The output code can be configured as Resolution- 14 bit
unipolar or bipolar which makes the relation Signal Resolution - 0.3mV(Voltage), 0.61uA(Current)
of output code and real output signal more I/O Points Occupied –
intuitive. For safety, the output signal will be
automatically forced to zero(0V or 0mA) 2 RO(Output Register)
when the module is not serviced by CPU for Conversion Time- Updated each scan
0.5 second. Accuracy- ±1 %
For analog input it provides 4 channels A/D
Max. and Min. output loading-
input with 12 or 14 bit effective resolution.
Base on the different jumper settings it can Voltage Output- 500~1MΩ
measure the varieties of current or voltage Current Output- 0~500Ω
signal. The reading value is represented by a Output Range-
14 bit value no matter the effective resolution
is set to 12 or 14 bit The output code also can -10~+10V, -5~+5V, 0~10V, 0~5V
be configured as unipolar or bipolar which -20~+20mA, -10~+10mA, 0~20mA, 0~10mA
makes the relation of input code and real
input signal more intuitive.. In order to filter Common Specification
out the field noise imposed on the signal, it Isolation- Transformer(Power) and photo-coupler(Signal)
also provides the average of sample input Indicator(s) - 5V PWR LED
function. External Power and Consumption-
24V-15%/+20%,
100mA max.
Internal Power Consumption- 5V, 20mA
Operating Temperature- 0 ~ 60 ℃
Storage Temperature- -20 ~ 80 ℃
Dimensions- 40(W)x90(H)x80(D) mm

1/6
 FBs-4A2D
Analog A/D&D/A Combo Module

Dimensions

Wiring Diagram
FBs-4A2D Output
FBs-4DA/2DA

+15V 24V+ + 24VDC

External power supply
15V 24V

CH0 Output ( Voltage Source )

V O0+ V+

I O0 V
Voltage Input
FG

AG

CH1 Output ( Current Source )

V O1+ I+

I O1 I
Current Input
Twisted Pair with shielding FG
Voltage / Current
selection

Inputs

V I0+
CH0 Input
V
I0 ( Voltage source )
I

V I1+
I CH1 Input
I1 ( Current sourvce )
I

AG

I I3+
CH5 Input
V
I3 ( Voltage source )
V

Twisted Pair with shielding

Voltage / Current
selection

2/6
 FBs-4A2D Analog A/D&D/A Combo Module

D/A Jumper Setup

Output Code Format Selection
There are two formats of output code can be selected, one is Unipolar and the other is Bipolar. The range
of the Unipolar code value is 0~16383 while the Bipolar is –8192~8191. The extreme two ends of the
code value corresponding to the minimal and maximal analog output level respectively. For example, if
the analog signal is set to –10V~+10V range, for the same code value 0, the Bipolar code will result 0V
output, while the Unipolar code will result –10V output, for the code value 8191, the Bipolar code will
result 10V output, while the Unipolar code will result 0V output. The JP1 are shared for CH0, CH1 which
means both channels can not configure to different output code format.

Format JP1 Code Range Corresponding Output

-10V～ 10V(-20mA～ 20mA)

-8192～ 8191
Bipolar
-5V～ 5V(-20mA～ 20mA)

0V～ 10V(0mA～ 20mA)

0～ 16383
Unipolar 0V～ 5V(0mA～ 10mA)

JPB

DA0

JPA DA1

JP3

JP4

JP1
JP5~JP8

3/6
 FBs-4A2D
Analog A/D&D/A Combo Module

Output Signal Type Selection

Please refer the above picture for the location of JPA & JPB. The upper row of JPA & JPB is for CH0
D/A, while the second row of JPA & JPB is for CH1 D/A.

Signal Type JPA (Voltage/Current) JPB (Range&Polarity)

Setup Setup
0V～ 10V

-10V～ 10V

0V～ 5V

-5V～ 5V

0mA～ 20mA
V
I

-20mA～ 20mA

0mA～ 10mA

-10mA～ 10VmA

4/6
 FBs-4A2D
Analog A/D&D/A Combo Module

A/D Jumper Setup

Input Code Format Selection
There are two input data formats can be selected which are bipolar and unipolar. The range of input value
is 0~16383 for unipolar format while bipolar is -8192~8191. The two extreme values of each range
corresponding to the minimal and maximal input signal. For example, if chose the -10V~+10V type
signal, for 10V input signal the input value is 16383 for unipolar format while the bipolar format is 8191.
Normally the input code format setting is consistent with input signal type (bipolar coded for bipolar
input signal, unipolar coded for unipolar input signal). Only when use the FUN32 for offset conversion
should set the bipolar code for unipolar input signal (Please refer the FUN32 description). The code
format of all input channels are set by the same JP1 jumper. The location and the setting of jumper of JP1
are shown at below

Code JP1 Setup Code Range Corresponding Input

Format
-10V～ 10V(-20mA～ 20mA)
Bipolar JP1 (A/D) -8192～ 8191
-5V～ 5V(-20mA～ 20mA)

0V～ 10V(0mA～ 20mA)

JP1 (A/D) 0V～ 5V(0mA～ 10mA)

Unipolar 0～ 16383

Voltage/Current input signal type setting

Signal Type JP5 ～ JP8

Voltage
V
I

Current

5/6
 FBs-4A2D
Analog A/D&D/A Combo Module

A/D Signal Type selection

Signal Type Polarity Setting (JP3) Range Setting (JP4)

0～10V
or
0～20mA

0～5V
or
0～10mA

-10～+10V
or
-20～+20mA
U
-5～+5V B
or
-10mA～+10mA

The default factory settings of 4A2D analogue input/output module are

Input code format – Bipolar(-8192~+8191)
Input signal type and range – Bipolar(-10V ~ +10V)
Output code format – Bipolar(-8192~+8191)
Output signal type and range – Bipolar(-10V ~ +10V)
For those applications that require the setting differ than the above default setting should make some
modifications of jumper position according to above tables.
While application, besides the setting of jumper should be conducted, the AI module configuration of
Winproladder also need to be performed.

6/6