Catalogue Collector 1607

AUTOMATIC
PRECIPITATION SAMPLER (COLLECTOR)

AND
ANALYSER (MONITOR)
TECHNICAL ALTERATIONS
 The technical description corresponds to the current products. Alterations because of technical improvements are possible.
Requested functions or features are only binding, if confirmed in a contract in written form.
 Specifications are subject to change without prior notice— Errors and omissions excepted.
 Goods are subject to prior sale
ILLUSTRATIONS
 Please take into account, that illustrations are intended to clarify certain points. There may therefore be discrepancies
between the illustrations and the written text.
LIABILITY
 We accept no responsibility for printing errors, writing errors or mistakes in the translation.
RESERVATION OF PROPRIETARY RIGHTS

 Names could be trade mark of Eigenbrodt GmbH & Co. KG or our supplier. Third party use for their own purposes may violate
the rights of the owner.
THIS CATALOGUE IS PUBLISHED BY:

Eigenbrodt GmbH & Co. KG
Baurat-Wiese-Straße 68
D-21255 Königsmoor
Tel. 04180-732
Fax. 04180-259
Email: [email protected]
 All rights reserved – year 2014

 Version: 14-06
EIGENBRODT GmbH & Co. KG Baurat-Wiese-Strasse 68  D-21255 Königsmoor  Telefon -+49-(0)4180-732  Telefax +49-(0)4180-259  Email [email protected]
Specifications are subject to change without prior notice, E & OE
Page: 2
ENVIRONMENTAL MEASURMENT SYSTEMS
UNIT OVERVIEW – CONTENT

FOG WATER COLLECTION ON THE IMPACTOR PRINCIPLE ........................................................................................................ 5
FOG SAMPLER NES 210 – MANUAL FOG SAMPLER WITH REGULAR VACCUM CLEANER ..................................................... 6
Features: ........................................................................................................................................................................................6
SPECIFICATIONS .........................................................................................................................................................................6
CONTENS OF DELIVERED PROGRAM.......................................................................................................................................6
Options ...........................................................................................................................................................................................6
FOG SAMPLER NES 215 – MANUAL FOG SAMPLER WITH SIDE CHANNEL BLOWER .............................................................. 7
FEATURES ...................................................................................................................................................................................... 7
SPECIFICATIONS .........................................................................................................................................................................7
CONTENS OF DELIVERED PROGRAM.......................................................................................................................................7
Options ...........................................................................................................................................................................................7
AUTOMATIC FOG SAMPLER ANES 220 ........................................................................................................................................... 9
FEATURES ...................................................................................................................................................................................... 9
TECHNICAL DESCRIPTION ............................................................................................................................................... 10
Control of automatic operation .....................................................................................................................................................10
Climate control for the sample .....................................................................................................................................................10
Data logging (optional) .................................................................................................................................................................10
SPECIFICATIONS .......................................................................................................................................................................10
CONTENS OF DELIVERED PROGRAM.....................................................................................................................................10
Options .........................................................................................................................................................................................10
NILU PARTICLE FALLOUT COLLECTOR AND PRECIPITATION COLLECTOR ......................................................................... 11
THE NILU PARTICULATE FALLOUT COLLECTOR SF1 ................................................................................................................ 12
SPECIFICATIONS SF 1 ........................................................................................................................................................ 12
THE NILU PARTICULATE FALLOUT COLLECTOR RS1................................................................................................................ 12
SPECIFICATIONS RS 1 ....................................................................................................................................................... 12
BULK SAMPLER BUS 125/KE.......................................................................................................................................................... 13
TECHNICAL DESCRIPTION ......................................................................................................................................................... 13
CONSTRUCTIONAL DETAILS ..................................................................................................................................................... 13
AUTOMATIC PRECIPITATION SAMPLER UNS 130/E AND UNS 130/D ........................................................................................ 15
PRINCIPLE OF MEASUREMENT ................................................................................................................................................. 15
NSA 161/R T-N PRECIPITATION SAMPLER ................................................................................................................................... 17
AUTOMATIC PRECIPITATION SAMPLER NSA 181 – BASIC TYPE.............................................................................................. 19
DISTRIBUTION OF PRECIPITATION SAMPLES - CONFIGURATION „D“ AND „S“: .................................................................. 20
OPTION: AUTOMATIC PRECIPITATION SAMPLER NSA 181/K.................................................................................................... 21
DISTRIBUTION OF PRECIPITATION SAMPLES - CONFIGURATION „D“ AND „S“: .................................................................. 22
PRINCIPLE OF COOLING ............................................................................................................................................................ 22
AUTOMATIC PRECIPITATION ANALYSER NMO 191 – TYPE ....................................................................................................... 23
PRINCIPLE OF COOLING (OPTIONAL) ....................................................................................................................................... 24
OPTIONS FOR PRECIPITATION SAMPLER AND –ANALYZER .................................................................................................... 25
DIFFERENT PRECIPITATION SENSORS ................................................................................................................................... 25
SNOW TOP - OPTION “H” (HEATED OR NOT HEATED) .......................................................................................................... 25
DURAN CONFIGURATIONS ........................................................................................................................................................ 25
STAND BASE ................................................................................................................................................................................ 26
DONWGRADE: NO HEATING ...................................................................................................................................................... 26
DONWGRADE: BULK VERSION .................................................................................................................................................. 26
COLLECTION FUNNELS .............................................................................................................................................................. 26
Page: 3 Specifications are subject to change without prior notice, E & OE

DRY SAMPLE CONTAINER UNIT ................................................................................................................................................ 26
FILTER ELEMENTS ...................................................................................................................................................................... 27
SOLAR POWER SUPPLY (WITH BATTERY BACK UP) .............................................................................................................. 27
LCD OPERATING HOUR METER ................................................................................................................................................ 28
SD-CARD LOGGER (DATA ACQUISITION) ................................................................................................................................. 28
EVENT DATA LOGGER ................................................................................................................................................................ 28
TIPPING BUCKET ......................................................................................................................................................................... 28
TEMPERATURE MONITORING FOR SAMPLE ROOM ............................................................................................................... 28
MULTI-SIGNAL PCBS – DATA ACQUISITION ............................................................................................................................. 29
D I G I T A L ..................................................................................................................................................................................... 29
TECHNICAL DATA ............................................................................................................................................................................ 30
TECHNICAL DATA: NSA 181 – TYPE .......................................................................................................................................... 30
TECHNICAL DATA: NSA 181/K – OPTION .................................................................................................................................. 31
TECHNICAL DATA: NSA 191 – TYPE .......................................................................................................................................... 32
MOST COMMON OPTIONS AND FEATURES ................................................................................................................................. 33
SPECIAL CUSTOMIZED DESIGNS .................................................................................................................................................. 34
PRECIPITATION COLLECTOR NSA 181/KD – MERCURY ......................................................................................................... 34
PRECIPITATION COLLECTOR NSA 181/KD - VMM ................................................................................................................... 35
PRECIPITATION COLLECTOR NSA 181/KHT ............................................................................................................................. 36
PRECIPITATION COLLECTOR UNS 130/E - BATTERY ............................................................................................................. 37
EIGENBRODT® develops and produces Precipitation Sampler and – Analyser for more
than 25 years very successful.
The instruments are in use worldwide and all year round under several climatic
conditions at the measurement sites of our customers. ( Universities, Environmental
Departments, Weather Services, Research Institutes, Industrial Companies )
It is possible to fulfil most of the wished applications with the range of offered standard
configurations.
Specific applications or adaptations to special environment conditions are possible.

Please challenge us.
German EPA measuring site on Sylt Island
 Suitable for all year use

 Sensitive Precipitation Sensors for all environmental conditions
 Very low service and maintenance requirements
Page: 4
EIGENBRODT® FOG SAMPLERS

FOG WATER COLLECTION ON THE IMPACTOR PRINCIPLE
All types of Eigenbrodt fog sampler feature the same principle of collection:
Fog water is collected with a sampler operating on the impactor principle (see figure). The air is sucked at a rate of rd. 125 m³/h
through a twin nozzle behind. A specially designed deposition body is placed onto which the fog droplets are impacted. The
deposition body has a vertically oriented hole in its centre which is connected to the impaction surface by numerous small bored
holes. The centre hole and the instruments exits are connected by tubes so
that a slight under pressure is applied sustaining a slight air flow through the
capillary holes.
The deposition body has a small rim at each side preventing the deposited
water from being ripped off and carried away with the fast air stream. The fog
droplets which are deposited coagulate and this water is sucked into the small
holes due to capillary forces and under pressure and drains into the centre
from where it flows into two collection bottles.
By this way a rapid separation of the collected water from the strong air
stream behind the nozzle is reached and problems as evaporation or
continuing reactions are minimized. Behind the nozzle the air is guided by
semicircular surfaces to the exit in order to avoid turbulences
(Schematic view of the FOG SAMPLER

and the deposition bodies.)
Functionality NES 210 NES 215 ANES 220

Manual switching on/off the sampling mode   ▬
Fog sensor allowing automatic switching on/off the sampling mode ▬ ▬ 
System completely built for outside operation all year long ▬  
Sample bottle 2x50 ml DURAN glass  ▬ ▬
Sample bottle 250 ml DURAN glass ▬  
Rugged and reliable side channel blower ▬  
Regular vacuum cleaner, that needs to be sheltered against ambient influences  ▬ ▬
Thermoelectric-cooling/heating for sample bottle ▬ ** **
Timed security switch off for vacuum cleaner / pump ▬  
Automatic stop of sampling outside temperature limits ▬ O 
Stand for fog sampler O O O
Data logging ▬ O O
▬: not available O: optional available : Standard feature of this type

* Sampling can be automatically switched on/off with external digital fog signal (to be provided by customer)
** System can optionally be provided without thermoelectric-cooling/heating system

FOG SAMPLER NES 210 – MANUAL FOG SAMPLER WITH REGULAR VACCUM
CLEANER
NES 210 with vacuum
cleaner (subject to
change) and optional
stand.
FEATURES:
 New design – combines a high efficiency with a low dispersion - Design: German Weather Service; Meteorological
Observatory Hohenpeißenberg, Dr. Peter Winkler
 Regular vacuum cleaner
 Manual switching on/off
SPECIFICATIONS CONTENS OF DELIVERED PROGRAM

Sample unit Sample unit
Length x width x height: 360 x130 x 260 mm Vacuum cleaner
Weight: Approx. 2,1 kg 2 x 50ml bottle borosilicate glass
Sampling orifice: 120 x 120 mm Documentation
Operating temperature: +0…40°C
Collection volume: 2x50 (borosilicate glass bottles)
Collection height: Approx. 1700 mm
(including optional stand)
OPTIONS
Vacuum cleaner Extra bottle DURAN glass, 50ml
Dimensions vacuum cleaner 35x35x40 mm (subject to change) Stand
length x width x height
Connected power 220/230V,50/60Hz, 1000 W
(1250 W max)
Legth hose: Approx. 1,5
Vacuum cleaner is not built for outside use. Customer End-user needs to take appropriate actions to protect the machines electrical
parts against ambient influences. (User has to provide weather protection for the vacuum cleaner)
Page: 6
FOG SAMPLER NES 215 – MANUAL FOG SAMPLER WITH SIDE CHANNEL BLOWER
Robust construction due to die cast aluminium

Ruggedness and proven reliability
Cooled/heated
Not Cooled/heated
FEATURES
 New side channel blower (working in pumping mode) with extended life time compared with vacuum cleaner.
 Basic frame out of Alu-profiles, PVC-plates planked housing
 Integrated collecting system
 Automatic thermoelectric (Peltier) cooling/heating for the sample.
 Manual switching on/off the blower, or triggered by external digital signal.
 Electronics (switch) for switching on/ off is installed into lockable electronic housing
 Can be mounted onto regular Eigenbrodt precipitation collector stand.

Sample unit (integrated into housing) Sample unit, integrated
Length x width x height: 360 x130 x 260 mm Side channel blower
Weight: Approx. 1,9 kg Thermo-electric cooling/heating system for sample
Sampling orifice: 120 x 120 mm Rugged housing for outside operation
Operating temperature: +0…40°C Documentation
Collection volume: 250ml (borosilicate glass bottle)
Collection height: Approx. 1800 mm
OPTIONS
Complete unit Downgrade for no heating/cooling
Length x width x height: 440 x 750 x1090 mm (including function for the sample bottle
shelter and optional fog sensor) Extra bottle DURAN glass, 250ml
Data logging with signal PCB memory
Weight: Approx. 65 kg Stand base
Connected power 220/230V,50/60Hz, 1300 W Fog sensor
Temperature/humidity probe with 2x1V output
Automatic switching off below 2°C and above 17 °C
Stand base

Page: 8
AUTOMATIC FOG SAMPLER ANES 220
IMPROVED
Fog sensor
Temperature sensor
with shelter
Fog sampler Control unit
Door
Sample container
Data logger
(optional)
Vacuum pump
Stand base
(optional)
FEATURES
 Fog sampler operating on the impactor principle with new design – combines a high efficiency with a low dispersion
 Sample design: German Weather Service Meteorological Observatory, Hohenpeißenberg; Dr. Peter Winkler
 Housing construction for all year operation
 Single sample bottle 250ml (borosilicate-glass)
 Thermoelectric integrated heating and cooling of the sample
 Electronics for switching on/ off the blower is installed into lockable electronic housing.
 Automatic optical fog detection in order to automatically switch on and switch off the fog sampling.
 Rugged and reliable side channel blower (working in pumping mode) with extended life time compared to vacuum cleaner
application.
 Thermoelectric cooling and heating
 Temperature/Humidity probe analogue signal output. Built into radiation shield and mounted at the side of the sampler.
 Temperature switch off deactivates automatically the blower with temperatures below 2°C and above 17 °C. This avoids
freezing of the fog near 0°C and overheating of the blower at high temperatures.
 Optional: Data logging with signal PCB NES memory, logging temperature, humidity, visibility and time switching on/off the
blower. The data logger can easily be programmed and read out via a regular terminal program, e.g. Putty (or similar).

TECHNICAL DESCRIPTION
CONTROL OF AUTOMATIC OPERATION

The laser based visibility sensor ONED 250 detects the visibility of the fog. In case the visibility is below a set point for a certain time,
the control electronics starts the operation of vacuum pump, which continuously sucks fog through the fog sampling device. In case
the visibility is above the set point for a certain time the pump is stopped.
The sampling process is also stopped when ever the ambient temperature is below 2°C in order to prevent the twin nozzles blocking
by icing. In most climate conditions there can be no fog expected with temperatures higher than 17°C, therefore also the sampling is
being stopped automatically. (limits can be changed on customer request)
An automatic system also prevents from damages by switching off the side channel blower for a certain time after a defined time of
continuous operation.
CLIMATE CONTROL FOR THE SAMPLE

A controlled thermoelectric heating and cooling system for the samples enables all year operation of the fog sampler. – The sample
keeps longer the composition of chemicals.
DATA LOGGING (OPTIONAL)

The basic information as switching on/off the pump; ambient temperature and humidity can be logged by an (optional) data logger,
which is built into the main housing.

Sample unit (integrated into housing) Sample unit, integrated
Length x width x height: 360 x130 x 260 mm Side channel blower
Weight: Approx. 1,9 kg Thermo-electric cooling/heating system for sample
Sampling orifice: 120 x 120 mm Rugged housing for outside operation
Operating temperature: +0…40°C Fog sensor
Collection volume: 250ml (borosilicate glass bottle) Temperature/humidity probe
Collection height: Approx. 1800 mm Documentation
OPTIONS
Complete unit Downgrade for no heating/cooling
Length x width x height: 440 x 750 x1090 mm (including function for the sample bottle
shelter and fog sensor) Extra glass-bottle, 250ml
Data logging with signal PCB memory
Weight: Approx. 70 kg Stand base
Connected power 2204230V,50/60Hz, 1300 W
Page: 10
NILU PARTICLE FALLOUT COLLECTOR AND PRECIPITATION COLLECTOR
The NILU Particulate Fallout Collector and the NILU

Precipitation Collector have been developed to collect
representative samples of dry and wet atmospheric particulate
fallout for subsequent analysis.
The design and development of the NILU collectors are based
on an evaluation of similar equipment in use in various
countries, including available wet precipitation collectors for
meteorological purposes. In addition to the given performance
criteria, factors such as construction materials, ease of handling
and transportability determined the shape and dimensions of
the collectors. The Fallout Collector has been considered by
ISO (International Standardization Organization) for adoption as
an international reference collector for particulate fallout. Its
design is according to the recommendations of ISO as the
present use of materials and procedures permit. (ISO/DIS
4222.2).
The mounting stand can be used for both collector types. Its
design allows both collectors to have the same position relative
to the bird ring. The stand is adjustable in height so that the
collectors can always be adjusted to the prescribed height
above ground (for instance when the snow depth varies), and to
facilitate the changing of collectors. The Precipitation Collector
is not designed to be used in freezing conditions. During
freezing conditions, when the evaporation losses are low, the
Fallout Collector can be used as precipitation collector as well.
In addition the sampling capacity is greater.
A product by:

THE NILU PARTICULATE FALLOUT COLLECTOR SF1
 Collector with lid

 Stand out of stainless steel
 Ground spike
Specifications SF 1 CONTENS OF DELIVERED PROGRAM

 Material collector HD-polyethylene  1 pc p.no. 9721, Fallout Collector
 Mounting stand stainless steel  1 pc p.no. 9723, Lid
 Diameter of collection surface: 200 mm (ISO standard)  1 pc p.no. 9724, Steel ring
 Collector height: 400 mm (ISO standard)  1 pc p.no. 9729, Telescope
 Height above ground, adjustable: 1,7…2,6 m (incl. ISO  1 pc p.no. 9730, Basket
standard)  1 pc p.no, 9728, Ground Spike
OPTION SF 1
- Expansion bolts instead of ground spike for rocky surfaces
- Each part can be ordered separately
THE NILU PARTICULATE FALLOUT COLLECTOR RS1
 Precipitation funnel
 PE-bottle (2,5 litre)
 Stand out of stainless steel
 Ground spike
SPECIFICATIONS RS 1 CONTENS OF DELIVERED PROGRAM

 Material collector: HD-polyethylene  1 pc p.no.9722, Precipitation Collector
 Mounting stand: stainless steel  1 pc p.no. 9723, Lid
 Diameter of collection surface: 200 mm (ISO standard)  1 pc p.no. 9724, Steel ring
 Height above ground, adjustable: 1,7…2,6 m (incl. ISO  2 pc p.no. 9725, 2.5 litre bottle
standard)  2 pc p.no. 9726, Screw cap
 1 pc p.no. 9732, Bugsieve
OPTION RS 1  1 pc p.no. 9727, Funnel - Bottle Adapter
- Expansion bolts instead of ground spike for rocky  1 pc p.no. 9731, O-ring
surfaces  1 pc p.no. 9729, Telescope
- Each part can be ordered separately  1 pc p.no. 9730, Basket
 1 pc p.no. 9728, Ground Spike
Page: 12
BULK SAMPLER BUS 125/KE
a total precipitation collector for obtaining samples for the analysis

of organic content - suitable for permanent / routine operation
 Sample cooled to approximately 5° C for storage

 Funnel- and sample bottle heating enables all year round
operation
 DURAN-glass funnel with 500 cm² collection area
 PELTIER cooling / heating for low power consumption
 Optional HD-PE configuration
A new kind of precipitation collector designed as a routine able bulk-collector to obtain samples for analysis of organic traces.
Funnel- and sample bottle heating enables year round operation. Cooling to a temperature of 5 °C prevents the loss of volatile
sample components. The DURAN-boro-silicate glass funnel helps prevent droplets adhering to the funnel and is pH neutral.
Direct material, funnel shape and the collection surface correspond to the standards of the VDI-recommendations 3870
(VDI: Association of German Engineers ) and LAWA-regulations.
Further information: “Ein neuartiger Niederschlagssammler zur Gewinnung von Proben für die Analytik organischer Spurenstoffe”;
Gefahrstoffe – Reinhaltung der Luft 60 ( 2000 ) Nr. 1 / 2, S. 69 / 70 Autor: Dipl. Chem. Oliver Merten, Landesumweltamt
Brandenburg
CONSTRUCTIONAL DETAILS
The precipitation collector is of modular construction and consists of the following components:
 Tube housing with strengthening ring and anchor points
 DURAN-glass funnel is removable for maintenance
 Heating insert with electronically controlled heating for melting the snow in the funnel while limiting evaporation
Removable sample insert with aluminium sample bottle, maintenance free PELTIER cooling / heating and integrated control
electronics

Collection surface 500 cm² Thick walled PVC housing with lockable door
Power Supply, total 230 VAC,50 Hz. max.100VA Collection funnel out of DURAN-Glass
Heating/cooling, electronical controlled Anchoring robes with earth rod and tension
Funnel heating 12 V DC, 50 Watt Funnel heating
Sample heating 12 V DC, 40 Watt Collecting insert with PELTIER- cooling/heating
Sample cooling 12 V DC, 40 Watt Documentation
Operating position 1500 mm; foundation is necessary
Dimensions H 1500 mm OPTION
 315 m Bird protection ring
Weight 35 kg Mini data logger for temperature, including data
handling

Page: 14
AUTOMATIC PRECIPITATION SAMPLER UNS 130/E AND UNS 130/D
one sample bottle, for universal use
 Funnel, 500 cm² collection surface

 Compact housing
 Collection electronic drive
 Single sample bottle (5 litre)
 Chemically neutral material of single components
 Electronic heating, thermostatic controlled
 Precipitation sensor RS 85 - sensitivity 0,05mm
The collector is developed for universal use and can be modified for the users’ specific problems. The compact module system and
the automatic collection system make it possible for use in extremely difficult locations, such as ships, research platforms, mountain
stations, towers etc.. The funnel is inserted from the top into the thick walled PVC housing. The sample bottle can be easily removed
from the apparatus at the end of the period of measurement for laboratory analysis. Every single component which is used for
measurement is made out of chemically neutral material. Direct material, funnel shape and the collection surface correspond to the
standards of the VDI-recommendations 3870 (VDI: Association of German Engineers). A thermostatically controlled heater is
intended for winter operation
Type E: The collection funnel is connected with a hose to the 5000 ml sample bottle via a outlet.
Type D: The collection funnel is connected with a hose to the sample insert module for collection of two samples, via a outlet. There
are 2 pcs. HD-PE collection bottles provided each 1500 ml for collecting the samples.
PRINCIPLE OF MEASUREMENT
An impulse from the Precipitation Sensor RS 85 at the start of precipitation causes the cover device to open up the collection funnel
in the following way: The lid moves up, swings to the side and sinks down to prevent introducing aerodynamic interference to the
sampling process. The precipitation coming from the funnel flows over a pipe into the bottle. When precipitation has ceased, a signal
from the Precipitation Sensor RS 85, which operates with an adjustable heating element, causes a motor to close the collection
funnel. For winter operation proportionally controlled funnel and main chamber heating for the sample bottle are provided

Collection surface 500 cm² Thick walled PVC housing with basic frame
and
Precipitation Sensor RS 85 door with lock
- status Precipitation yes/no Collection funnel out of HD-PE
- switch on without delay Sample bottle out of PE ( 5 litres )
- switch off with delay Lockable Alu housing with drive unit and
Power , total 230 VAC, 50 Hz. max.250 VA control electronics
Direct current supply collector internal Sample heating
Heating, Precipitation Sensor RS 85
thermostatically controlled 24 V DC, 2 x 30 Watt OPTION
Funnel lid motor 24 V DC, 50 Watt Sample bottle 10 litre HD-PE
Operating Position Sample bottle out of Duran-glass or teflon
Total height with stand 1500 mm; foundation is Collection funnel out of Duran-glass or
necessary Quarzglass
base 2-fold sample bottle insert module
Dimensions H 800 mm Opto-electronical Precipitation Sensor IRSS88
L 470 mm Stand base, made of galvanized steel
W 350 mm LCD working hour meter
Mini data logger
Weight
Sampler 46 kg
Stand base 17 Kg
UNS 130/D 2-fold sample bottle insert with

DURAN glass (optional)
Page: 16
NSA 161/R T-N PRECIPITATION SAMPLER

Precipitation sampler for control of radioactivity in total deposition
 Sampling of total deposition

 Corresponding to the recommendations of the German
guideline for control of emissions and immissions for
nuclear plants
The precipitation collector is designed to collect the precipitation for later on radioactive analysis, which is requested by German law
to nuclear plants. The analysed element is the active concentration of -rays per litre collected precipitation.
To determine the active radiation consecration correctly, one collector shall be placed within the main wind direction of the nuclear
site and the other one on the opposite direction.
The housing with a cylindrical shape is made out of polyethylene, double walled and isolated with mineral wool. An open collection
funnel out of PE with integrated rim is used to collect the total deposition and can be removed from the instrument for cleaning. At
the front of the instrument there is a lockable door to enable the changing of the sample container
During the winter season the inner chamber will be kept at a temperature of some degrees over zero by two thermostatically
controlled convective heating and axial ventilators, to melt down the snow and to avoid the freezing of the water in the sample
container.
The precipitation, collected in the funnel area flows via a outlet and a drain off house into distributing system out of PE. 4 pieces
bottle (20 litres each) are filled one after the other. In case all bottles are completely filled an integrated overflow leads the additional
water to the outlet. A meter scale indicated the collected precipitation within each of the bottles.

Collection surface 5000 cm² - double walled, isolated PE housing with
Power supply, total 230 VAC / 50 Hz , max. 400 VA lockable door
Heating thermostatically controlled - Collection funnel out of PE
Inner chamber heating 2 x 200 Watt , 230 VAC - Heating thermostatically controlled
Operation position 1500 mm; foundation is necessary - Sample container out of HD-PE , 4 x 20 litre
Housing dimensions H 1250 mm - Bird protection ring ( removable )
 900 m
Weight
Sampler 68 kg
Stand base 14 kg

Page: 18
AUTOMATIC PRECIPITATION SAMPLER NSA 181 – BASIC TYPE
 Compact instrument build up in modular

structure, insulated PVC housing
 Precipitation Sensor RS 85
 Collection funnel, 500 cm² collection surface
 Sample bottle (5 litre), 2-fold weekly sample
bottle (2x5 litre) or single sample bottle insert
(8x1 litre)
 Electronic control with SIEMENS® technology
 Electrical heating system, thermostatically
controlled
 Chemically neutral material of sample contact
components
NSA 181/S
NSA 181/E (picture shows optional items)

The precipitation sampler is used for the purpose of collecting the precipitation, depending of its configuration, in a large sample
bottle (E configuration), 2 bottles for weekly samples (D configuration) or in 8 separate day or single daily samples (S configuration).
The individual sample bottle can be easily removed from the apparatus at the end of the period of measurement for laboratory
analysis. Every single component which is used for measurement is made out of chemically neutral material and placed in a
thermally insulated housing. At high temperatures the housing is ventilated automatically to avoid overheating from intense radiation
of the sun. For winter operation an electronically controlled funnel heating and a heating for the sample room are provided.
Direct material, funnel shape and the collection surface correspond to the standards of the VDI-recommendations 3870. (VDI:
Association of German Engineers)
At the start of precipitation an impulse from the Precipitation Sensor RS 85 (optional NRS80 or IRSS 88) causes the cover
mechanics to open up the collection funnel in the following way: The lid moves up, swings to the side and sinks down to prevent
introducing aerodynamic interference to the sampling process. The rim of the funnel remains to be the highest part of the collector.
The design of the collector avoids back-splashing of water into the funnel itself. The precipitation coming from the funnel flows over a
pipe directly into the sample bottle (E configuration) or into a ring funnel an then through a hole into the rotating head. The rotating
head is connected to the individual hard polyethylene sample bottle by drain pipes and silicone hoses (D or S configuration). When
precipitation has ceased a signal from the Precipitation Sensor causes a motor to close the collection funnel.
Distribution of precipitation samples - configuration „D“ and „S“:

The precipitation coming from the funnel flows into a ring funnel an then through a hole into the rotating head. The rotating head is
connected to the individual hard polyethylene sample bottle by drain pipes and silicone hoses. A SIEMENS ® LOGO® control, which
is programmable, causes a motor to advance the ring funnel and gathered precipitation fall into the following bottle by the way of the
next opening of the rotating head. In case of breakdown in the external power supply all switching points will be caught up
automatically. An accumulator will provide current for time control and for control of the rotating head at least for 24 hours to ensure
the bottle changing.
CONTENS OF DELIVERED PROGRAM IN GENERAL CONTENS OF DELIVERED PROGRAM SPECIFIC TO

Double walled insulated PVC housing CONFIGURATION
Collection funnel of HD-polyethylene
Configuration „E“ – with one sample bottle
Control electronics with lid Sample bottle out of HD-polyethylene (5000 ml or 10000 ml)
Heating for funnel and sample bottles Sample room heating
Precipitation Sensor RS 85
Configuration „D“ – for 2 weekly samples
2-fold collecting insert module (bottle tray) with sample bottles out
OPTIONS
of HD-PE (5000 ml)
Sample bottle out of DURAN-glass or Teflon
Sample bottle heating in ground sheet instead of collection room
Collection funnel out of Duran-glass or Quartz-glass
heating
Opto-electronical Precipitation Sensor IRSS 88
Control electronics for rotating head
Precipitation Sensor NRS 80 or RS 85 OP for locations
without or few snowfall
Configuration „S“ – for 8 days single sample
High (snow) top heated or not heated (option “H”)
8-fold collecting insert module (bottle tray) with sample bottles out
Dry sample container out of PE or DURAN-glass of HD-PE (1000 ml)
LCD-hour meter Second set sample bottles out of HD-polyethylen
Data logging systems Sample bottle heating in ground sheet instead of collection room
heating
Stand base, made of galvanized steel
Impulse unit for rotating head
Various signals for external data acquisition
Optional: event depending collection of precipitation
Solar power supply (special conditions may apply)
Tipping bucket system
Page: 20
 OPTION: AUTOMATIC PRECIPITATION SAMPLER NSA 181/K
NSA 181/KD
NSA 181/KE - DURAN glass
 Compact instrument build up in modular structure, insulated

PVC housing for easy service
 Precipitation Sensor RS 85 NSA 181/KS - DURAN glass
 Electronic control with SIEMENS® technology

 Collection funnel, 500 cm² collection surface
 Sample bottle (5 litre), 2-fold weekly sample bottle or single
sample bottle insert
 Automatic climate control system for sample room to 4-6°C.
(adjustable temperature 3…10°C optional)
 Cooling FCKW free

The precipitation sampler is used for the purpose of collecting the precipitation, depending of its configuration, in a large sample
bottle, in 8 separate day or single samples or weekly samples. The individual sample bottle can be easily removed from the
apparatus at the end of the period of measurement for laboratory analysis. Every single component which is used for measurement
is made out of chemically neutral material and placed in a thermally insulated housing. At high temperatures the housing is cooled
automatically to avoid overheating from intense radiation of the sun. For winter operation an electronically controlled funnel heating
and a heating for the sample bottles, respectively sample room heating are provided.
Direct material, funnel shape and the collection surface correspond to the standards of the VDI-recommendations 3870. (VDI:
Association of German Engineers)
An impulse from the Precipitation Sensor RS 85 at the start of precipitation causes the cover device to open up the collection funnel
in the following way: The lid moves up, swings to the side and sinks down to prevent introducing aerodynamic interference to the
sampling process. The precipitation coming from the funnel flows over a pipe directly into the sample bottle ( E type ) or into a ring
funnel an then through a hole into the rotating head. The rotating head is connected to the individual hard polyethylene sample bottle
by drain pipes and silicone hoses ( D or S type ). When precipitation has ceased, a signal from the Precipitation Sensor RS 85,
which operates with an adjustable heating element, causes a motor to close the collection funnel.
Distribution of Precipitation samples - configuration „D“ and „S“:

The precipitation coming from the funnel flows into a ring funnel an then through a hole into the rotating head. The rotating head is
connected to the individual hard polyethylene sample bottle by drain pipes and silicone hoses. A SIEMENS ® LOGO® control, which
is programmable, causes a motor to advance the ring funnel and gathered precipitation fall into the following bottle by the way of the
next opening of the rotating head. In case of breakdown in the external power supply all switching points will be caught up
automatically.
Principle of Cooling
At the bottom of the collector an automatic working refrigerating machine with defrost automatic is installed. With the help of a plate
evaporating unit with ventilation the temperature of the cooling space is constant held on 4-6 ºC
CONTENTS OF DELIVERED PROGRAM IN GENERAL CONTENTS OF DELIVERED PROGRAM SPECIFIC TO

Double walled insulated PVC housing CONFIGURATION
Collection funnel of polyethylene (respectively out of DURAN- Configuration „E“ – with one sample bottle
glass in DURAN execution) Sample bottle out of HD-Polyethylen (5000 ml or 10000 ml)
(respectively out of DURAN-glass in DURAN execution)
Control electronics for drive for lid
Collection room heating
Heating for funnel and sample bottles
Configuration „D“ – for 2 weekly samples
Refrigerating machine with defrost automatic 2-fold collecting insert module (bottle tray) with sample bottles
out of HD-PE (5000 ml) (respectively out of DURAN-glass in
( refrigerating agent R 134 a, FCKW-free ) DURAN execution)
Precipitation sensor RS 85 Sample bottle heating in ground sheet instead of collection

room heating
OPTIONS
Sample bottle out of DURAN-glass or teflon Control electronics for rotating head
Collection funnel out of Duran-glass or Quarz-glass

Opto-electronical Precipitation Sensor IRSS 88 Configuration „S“ – for 8 days single sample
8-fold collecting insert module (bottle tray) with sample bottles
Precipitation Sensor NRS 80 or RS 85 OP for areas out of HD-PE (1000 ml) (respectively out of DURAN-glass in
without snow DURAN execution)
Snowtop Second set sample bottles out of HD-Polyethylen (respectively

out of DURAN-glass in DURAN execution)
Dry sample container out of PE or DURAN-glass
Sample bottle heating in ground sheet instead of collection
LCD-hour meter room heating
Data logging systems Impulse unit for rotating head
Stand base, made of galvanized steel Optional: event depending collection of precipitation
Page: 22
AUTOMATIC PRECIPITATION ANALYSER NMO 191 – TYPE

for continuous measurement of pH, electrical conductivity and intensity/ quantity of precipitation
New 3,5“ touch-LCD
NMO 191 basic
NMO 191/E
 High performance and long stability through the use of:

NMO 191/S
 Reliable electronic compounds with industry standard
 Assorted material proven field operation for many years
 Precise and stable sensors/probes
 Rugged design for dependable operation in nearly all climate conditions
 Collection funnel with 500 cm² collection surface allowing up to 50ml sample with
1mm of precipitation
 PLC electronic control with SIEMENS® technology
 continuous measurement of pH, electrical conductivity, intensity and quantity of
precipitation –> New data with less than 0,5mm precipitation
 Industrial standard measuring instrument, microprocessor controlled with
3,5” touch screen display.
 Multiple options for automatic data recording of significant precipitation data (like
internal data logging system and/or SD-card memory)
 Various interfaces optional (RS-232, RS 485, Ethernet)
 Precipitation Sensor RS 85

The continuous measurements of pH and conductivity yield instantaneous values for the amount of dissolved trace substances as
well as the acidity. The synchronous measurement of the two parameters allows quality control of the results and a good estimate of
the amount of free acid in the precipitation. Acidity and amounts of trace substances obtained by precipitation correspond closely to
the temporal development of the precipitation event. Therefore the concurrent measurement of amount and intensity of precipitation
gives insight into the physics of the removal processes. Analysis of precipitation in laboratories is possible through the separation of
material flowing through the measurement block and material collected in the sample bottle. Every single component which is used
for measurement is made out of chemically neutral material and placed in a terminally insulated housing. Direct material, funnel
shape and the collection surface correspond to the standards of the VDI-recommendations 3870 (VDI: Association of German
Engineers). This monitor is fitted with electronically controlled heatings for winter operation.
Automatic working ventilation starts to replace inside air with filtered ambient air at temperatures of 25° and above. Alternatively an
optional refrigerating machine with defrost automatic is installed. With the help of a plate evaporating unit with ventilation the
temperature of the cooling space is constant held on 4-7 ºC.
An impulse from the precipitation sensor at the start of precipitation causes the cover device to open up the collection funnel in the
following way: The lid moves up, swings to the side and sinks down to prevent introducing aerodynamic interference to the sampling
process.
From the funnel the precipitation to flows a tipping bucket, being separated into two equal portions. One half is collected directly in
the sample bottles (optional), the second half flows into the temperature controlled measuring unit. There it first flows by the electrical
conductivity and temperature measurement – then it will be drop wise (galvanic) separated and - then the water passes by the pH
probe.
When precipitation has ceased, a signal from the precipitation sensor RS 85, which operates with an adjustable heating element,
causes a motor to close the collection funnel.
Principle of Cooling (optional)

At the bottom of the collector an automatic working refrigerating machine with defrost automatic is installed. With the help of a plate
evaporating unit with ventilation the temperature of the cooling space is constant held on 4-6 ºC
CONTENTS OF DELIVERED PROGRAM IN GENERAL

 Double walled insulated PVC housing  LCD operating hour meter
 Collection funnel of HD-PE  Stand base, made of galvanized steel
 Sensor controlled heating for sample room  High(-snow) top
 Sensor controlled heating for funnel minimising evaporation  Dry sample container unit (deposit gauge: diameter
losses when melting snow. 200mm x 400mm high)
 Precipitation Sensor RS 85 (details see information  Washing system
“meteorology catalogue”)  Heating for drain
 Electronic PLC control with SIEMENS® technology for funnel
cover and sample distributor (if applicable) CONTENTS OF DELIVERED PROGRAM SPECIFIC TO
 Calibrated tipping bucket system for precipitation CONFIGURATION
measurement
Configuration „E“ – with one sample bottle
 Temperature controlled measuring insert with combined
Sample bottle out of HD-Polyethylen (5000 ml )
conductivity and temperature sensor and pH probe
 Modular “Multichannel Measuring Device” with integrated
Configuration „S“ – for 8 days single sample
microcontroller and 3,5” LCD-touch screen for pH,
conductivity and temperature.
out of HD-PE (750 ml)
 Ventilation system with filter for sample room temperatures
Second set sample bottles out of HD-Polyethylen
above 25°C
Time based bottle assignment through control-system
OPTIONS
Configuration „KS“ – for 8 days single sample
 Opto-electronical Precipitation Sensor IRSS 88
 Precipitation Sensor NRS 80 or RS 85 OP for areas with few
out of HD-PE (750 ml)
snow
Second set sample bottles out of HD-Polyethylen
 Data various acquisition options (SD-card, internal memory,
Time based bottle assignment through control-system
 Output: RS232, RS485, Ethernet
Automatic cooling CFC-free
Page: 24
OPTIONS FOR PRECIPITATION SAMPLER AND –ANALYZER
Different Precipitation sensors Available for:

Different types of Precipitation Sensors, specially adapted to various applications and local conditions. UNS 130 
NSA 181 
NSA 181/K 
NMO191 
RS 85: standard Precipitation Sensor. It is suitable for almost all climatic
conditions. The snow catching pins allow a very good detection also of snow events.
The RS 85 OP is like the standard Precipitation Sensor RS85, but without snow pins. The pyramid shape
allows a good detection to all 4 directions. This sensor suitable for operation in areas with few snowfall, like
in maritime climatic conditions.
Precipitation Sensor NRS 80 is suitable for the use in areas with few snowfall, for instance in maritime
climatic conditions.
Ideal for high polluted areas or close to the sea also for low power applications with solar and/or battery
power supply we recommend the use of the Precipitation Sensor IRSS 88. The measurement principle
is opto-electronical. In order to determine the precipitation, the number of drops and also the detecting
interval length are adjustable.
Snow top - OPTION “H” (heated or not heated)

Housings with snow top have a better aerodynamic profile and
influences therewith the rain collection rate
The snow top configuration can be (optional) constantly heated
and therefore avoids that snow can be built up on the housing.
This option is useful especially in areas with lots of snow fall.
Available for:
UNS 130 -
NSA 181 
NSA 181/K 
NMO191 
DURAN Configurations
By collection of precipitation for analysis of organic components it is important to choose an alternative

contact material for sample bottles and funnels than Polyethylene. For all types of instruments funnels and
sample bottles are available in DURAN-glass. The distribution system for type “D” and “S” is made out of
PTFE.
Available for:
UNS 130 
NSA 181 
NSA 181/K 
NMO191 

STAND BASE
The robust stand base for Precipitation Sampler and – Analyser has a good stand. It is made out of
steel, hot-dip galvanised for outdoor use. The total height, stand base and instrument, will be
between 1.5 m up to 1.8 m following the WMO recommendations. Customized stand bases for other
collecting heights are available on request.
The precipitation sensor can be also mounted on a stand base of its own. (hot-dip galvanised)
This allows to locate the sensor separated from the field of direct influence of the sampler. The height
of the sensor is approx. 1,5 m above ground.
Available for:
UNS 130 
NSA 181 
NSA 181/K 
NMO191 
DONWGRADE: NO HEATING Available for:

In areas with +0°C temperatures throughout the whole year, a heating of sample room or precipitation UNS 130 
funnel are not necessary. Therefore all Eigenbrodt Precipitation Collectors or Precipitation Monitors NSA 181 
can be supplied without a heating system being installed. NSA 181/K 
NMO191 
DONWGRADE: BULK VERSION Available for:

Some guide lines or research applications do not require a wet only execution of the collectors or UNS 130 
monitors. Therefore all EIGENBRODT Precipitation Collectors or Precipitation Monitors can be NSA 181 
supplied as bulk version without automatic funnel covering mechanism or precipitation detection. NSA 181/K 
NMO191 
COLLECTION FUNNELS
Collection of precipitation for analyzing organic components as well as mercury in the precipitation, the Available for:
choice of the best fitting contact material like sample funnels is very important. In these cases PTFE and UNS 130 
DURAN-glass, in some cases also stainless steel are preferable to HD-polyethylene. Collecting NSA 181 
precipitation for acidifying components HD-PE is seen as the appropriate contact material to the sample. NSA 181/K 
Eigenbrodt has designed a complete series of collection funnels to fit the collector the application. NMO191 
Care was taken to achieve a smooth surface to reduce any deposits in the funnel.
The special design of the funnel with cylindrical part > radius of the funnel allows splash water and also snowflakes to stay inside the
funnel.
 HD-PE, 500cm² - maximum theoretical collecting capacity: 50ml with each 1mm precipitation
 DURAN, 490cm² - maximum theoretical collecting capacity: 49ml with each 1mm precipitation
 Stainless steel, 500cm² - maximum theoretical collecting capacity: 50ml with each 1mm precipitation
 PTFE, 500cm² - maximum theoretical collecting capacity: 50ml with each 1mm precipitation
Dry Sample Container Unit
Page: 26
For certain research situations it is not only interesting to sample the wet-only
deposition, but also the dry-only deposition at the same place during periods of no
precipitation. The DSC-unit allows this type of samples. It maintains open during periods
of no rain, and will be closed with the coverlid during rainy periods automatically.
The DSC-unit can be ordered heated and unheated. As material for the sample
container HD-PE or DURAN-glass can be chosen.
Available for:
UNS 130 
NSA 181 
NSA 181/K 
NMO191 
Filter elements
Some site conditions may require particle filer for the collection funnels (leafs, lims,..) . Available for:
Eigenbrodt does have a choice of different type dirt-filters. UNS 130 
Of course, depending on the application the type (dirt filer, filter-chamber with glass wool) or the contact material
NSA 181 (HD-PE, PTFE)
 can
be selected. NSA 181/K 
NMO191 
Solar power supply (with battery back up)

The collector versions UNS 130, and NSA 181 (not with K-option) may optionally be
operated with solar power supply.
The size of the battery and solar modules depends different Available for:
facts (location of the collector, the distance to overcome a UNS 130 
period without sun shine, the connected electricity consumers) NSA 181 
and needs to be adopted to the single application. Due to the NSA 181/K -
high power consumption of heating and cooling machines NMO191 -
within the precipitation collectors, it is usually not economically
worthwhile to quip these instruments with an solar power supply.

LCD OPERATING HOUR METER
The LCD hour meter counts the lid open hours of the instrument. Available for:
The value can be set to zero via a reset switch manually. UNS 130 
NSA 181 
NSA 181/K 
NMO191 
SD-card Logger (data acquisition)

Available for:
UNS 130 
NSA 181 
NSA 181/K 
NMO191 
The all new SD-card data logger allows in combination with Eigenbrodt MULTI-SIGNAL PCBs to log data sets on SD-memory cards.
This allows retrieving the data simply by replacing the SD-card.
The unit is easy to operate: Just to push in the SD-card and the logging file is automatically been created. All data from this point of
time will be written to the SD-card. In case the file already exists, the new data will be added at the end of the file. The file is logged
in text format and can be opened with most file editors. A built in serial port (RS232/RS485) allows programming the Eigenbrodt
signal PCB from the sample room. The SD-card writer can be retrofitted to all Eigenbrodt precipitation collectors and monitors with
built in MULTI-SIGNAL PCB “Serial” or “Memory”.
Event Data Logger

The event data logger stores date and time of the opening- and closure Available for:
times of the lid. The data can be read out with PC or laptop via a RS UNS 130 
232 interface or USB interface (depending on logger type) NSA 181 
NSA 181/K 
NMO191 
Tipping bucket
The precipitation collectors NSA181/NSA181K and UNS 130 can Available for:
optionally be equipped with a tipping bucket. With the Precipitation UNS 130 
Monitors NMO191 the tipping bucket is standard. NSA 181 
This system provides digital pulses of the precipitation amount being NSA 181/K 
collected with through the collection funnel. In combination with the NMO191 
EIGENBRODT MULTI-SIGNAL PCBs Serial or Memory, it is possible to log rainfall amount and
also the intensity.
Note for NSA181/NSA181K: In order to fit the tipping bucket into the housing, the cylindrical with
be extended as shown in the picture right hand side.
 The design may change based on the collector type.
 Resolution: 0,05mm precipitation, calibrated up to 70 mm/h precipitation
Temperature monitoring for sample room
The Pt100 temperature sensor is installed into the sample room as shown Available for:
left hand side. The data is available as Pt100 signal. In combination with the UNS 130 
EIGENBRODT signal PCBs, the temperature data of the sample room can NSA 181 
be accessed as 4-20mA signal or as serial signal, depending on version of NSA 181/K 
the PCB. NMO191 
Page: 28
Available for:
MULTI-SIGNAL PCBs – Data acquisition
UNS 130 
The signal board provides galvanically isolated digital signals for status indication and function
NSA 181 
control of the collectors/monitors. These signals can be logged e.g. with a data logger or any other
NSA 181/K 
capable data acquisition system. Upon request an optional data logging system can be provided.
NMO191 
 Precipitation yes/no
 Failure funnel door
 Bottle position and failure distributor (with versions T, S, S-16 and D)
 Temperature sample room (optional)
 Rainfall amount/intensity (optional)
 pH, el. conductivity and rain temperature (with NMO191 only)
The built in signal PCBs/data acquisition provides valuable status information of the Eigenbrodt Precipitation Collectors and Acid
Rain Analyser / Monitors
SIGNAL NSA-Standard NSA-Serial NSA-Memory NMO-Serial NMO-Memory

Digital
Precipitation yes/no     
Failure funnel door     
-    
Failure distributor (only with models D, T and S, S-16)
Precipitation amount (only with tipping bucket option)     
Output Relay output (closer), potential free, galvanically separated from other power
circuits.
Analogue
Temperature (only with the order of Pt 100     
option for sample room temperature)
Output 4...20 mA, 0…10 V (others on request)
Serial
Precipitation yes/no -    
Failure funnel door -    
Bottle number (only with models D, T and S, S-16) -    
Failure distributor (only with models D, T and S, S-16) -    
-    
Precipitation amount and rainfall intensity (only with
tipping bucket option)
-    
Programmable accumulation interval time for tipping
bucket pulses. (NSA, only with tipping bucket option)
-    
Programmable time of the day for resetting the tipping
bucket counter: (NSA, only with tipping bucket option)
Temperature (only with the order of temperature -    
observation option for sample room)
pH, electrical conductivity and rain temperature at - - -  
adjustable intervals (NMO 191 only)
Averaged data of pH, electrical conductivity and rain - - -  
temperature at adjustable intervals (NMO 191 only)
Output/Input Bi-directional interface RS 232 / RS 485 to program the PCB and to retrieve
the data. The communication is possible with terminal programs like Putty® -
No further special communication software is needed.
Gathering information and send via below communication protocols is possible:
1.Satellite communication 2.GSM
3.GPRS 4.VPN
5.PSTN
Optional Ethernet output/input - -   
Number of Data sets - - > 160.000* - > 100.000*

* Depending on optional features like temperature, tipping bucket the total number of data sets may change.

TECHNICAL DATA
TECHNICAL DATA: NSA 181 – TYPE
NSA 181 /E NSA 181/HE NSA 181 /D NSA 181 /HD NSA 181 /S NSA 181 /HS
Collection surface ------------------------------------------------------------ 500 cm²----------------------------------------------------------------
Status -------------------------------------------------Precipitation yes / no ----------------------------------------------------------
Switch on -----------------------------------------------------------without delay ----------------------------------------------------------
Switch off ------------------------------------------------------------ with delay ------------------------------------------------------------
Power supply
Input supply voltage 230 V AC, 230 V AC, 230 V AC, 230 V AC, 230 V AC, 230 V AC,
50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz
Maximum connected load 270 Watt 370 Watt 270 Watt 370 Watt 270 Watt 370 Watt
cooling – – – – – –
Drive
Cover for funnel -------------------------------------------------------24 V DC, max. 50 Watt -------------------------------------------------
Distributor – – ---------------6 V DC------------------
Heating
Precipitation Sensor (RS85) ------------------------------------------24 V DC, 50 Watt, proportionally controlled------------------------------------
Funnel ------------------------------------------24 V DC, 50 Watt, proportionally controlled------------------------------------
Heating sample room 230 V AC, 50Hz alt. 24 V DC. 24 V DC, 100 Watt, controlled 24 V DC, 100 Watt, controlled
100 Watt
Heating snow top – 24 V DC, – 24 V DC, – 24 V DC,
100 Watt 100 Watt 100 Watt
Dimensions
height [mm] 950 950 950
wide [mm] 520 520 520 520 520 520
depth [mm] 560 640 560 640 560 640
Weight
Sampler [kg] 71 75 78 82 78 82
Stand base [kg] 16 14,6 16 14,6 16 14,6
Operating position
Total height with stand base 1575 1675 1575 1675 1575 1675
[mm]
---------------------------------------by use of stand base foundation necessary-------------------------------
Page: 30
TECHNICAL DATA: NSA 181/K – Option

NSA 181 /KE NSA 181/KHE NSA 181 /KD NSA 181 /KHD NSA 181 /KS NSA 181 /KHS
Collection surface ----------------------------------------------------------------- 500 cm²-----------------------------------------------------------
Status --------------------------------------------------------Precipitation yes / no ---------------------------------------------------
Switch on ------------------------------------------------------------without delay ---------------------------------------------------------
Switch off -------------------------------------------------------------- with delay ----------------------------------------------------------
Power supply
Input supply voltage 230 V AC, 230 V AC, 230 V AC, 230 V AC, 230 V AC, 230 V AC,
50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz
Maximum connected load 430 Watt 530 Watt 430 Watt 530 Watt 430 Watt 530 Watt
Cooling 230 V AC, 160 Watt
Drive
Cover for funnel ----------------------------------------------------------------24 V DC, max. 50 Watt-----------------------------------------
distributor – – -------------6 V DC---------------
Heating
Precipitation Sensor (RS85) ------------------------------------------24 V DC, 50 Watt, proportionally controlled------------------------------------
Funnel ------------------------------------------24 V DC, 50 Watt, proportionally controlled------------------------------------
Heating sample room 230 V AC, 50Hz alt. 24 V DC. 24 V DC, 100 Watt, controlled 24 V DC, 100 Watt, controlled
100 Watt
Heating snow top – 24 V DC, – 24 V DC, – 24 V DC,
100 Watt 100 Watt 100 Watt
Dimensions
height [mm] 1250 1350 1250 1350 1250 1350
wide [mm] 485 485 485 485 485 485
depth [mm] 660 640 660 640 660 640
Weight
Sampler [kg] 93 97 100 104 100 104
Stand base [kg] 14,6 14,6 14,6 14,6 14,6 14,6
Operating position
Total height (up to funnel top 1575 1675 1575 1675 1575 1675
edge) with stand base [mm]
--------------------------------------- by use of stand base foundation necessary --------------------------------------

TECHNICAL DATA: NSA 191 – TYPE
NMO 191 NMO 191/E NMO 191/S NMO 191/KS NMO 191/KHE
Collection surface ------------------------------------------------------ 500 cm²-----------------------------------------------------
Status --------------------------------------------Precipitation yes / no ---------------------------------------------
Switch on --------------------------------------------------without delay ---------------------------------------------------
Switch off --------------------------------------------------- with delay -----------------------------------------------------
Operating voltage
Input supply voltage 230 V AC, 230 V AC, 230 V AC, 230 V AC, 230 V AC,
50 Hz 50 Hz 50 Hz 50 Hz 50 Hz
Maximum connected load 320 Watt 320 Watt 320 Watt 530 Watt 530 Watt
cooling – – – 230 V AC, 230 V AC,
160 Watt 160 Watt
Direct voltage supply internally
Drive
Cover for funnel --------------------------------------------24 V DC, max. 50 Watt--------------------------------------------
Distributor – – -----------------6 V DC------------------- –
Heating
Precipitation Sensor (RS85, RS85OP, -----------------------------------24 V DC, 20 Watt, proportionally controlled---------------------------
NRS80,)
Funnel -----------------------------------24 V DC, 50 Watt, proportionally controlled---------------------------
Heating sample room 24 V DC, 100 Watt, prop. controlled
Heating snow top – – – – 24 V DC,
100 Watt
Heating measurement block -----------------------------------12 V DC, 50 Watt, proportionally controlled---------------------------
pH-Measurement
Measurement range 2-12 pH at -5…+80°
resolution 1 Digit = 0,01 pH
Type Low maintenance combination glass-gel electrode gel filled
Precipitation amount
Resolution 0,05 mm/impulse
Precision Calibrated  2 % (at intensities up to 30 mm/h)
Type Tipping bucket
Electrical conductivity and temperature
Measurement range 0 S/cm – 1999 S/cm at -5…+80°C
Type 4-pole platinum electrode
Integrated Temperature NTC30
Dimensions
Height [mm] 950 1250 1350 1350 1350
wide [mm] 520 485 520 520 485
depth [mm] 560 660 640 640 640
Weight
Sampler [kg] approx. 90 approx. 95 approx. 100 approx. 110 approx. 115
Stand base [kg] 16 14,6 14,6 14,6 14,6
Operating position
Total height with stand base [mm] 1575 1575 1675 1675 1775
------------------------------------------by use of stand base foundation necessary--------------------
Page: 32
MOST COMMON OPTIONS AND FEATURES
Option: NSA
UNS 130
NMO 191
NSA 181
181 K
Heating X X X X
Cooling X X (X)*
Automatic climate control of sample room to preset temperature X (X)
Automatic climate control of sample room to adjustable temperature of 3…10 °C X (X)
Snow Top – heated or unheated X X X
Distributor applications
Single sample bottle (1 x 5 Litre HD-PE) X X X (X)
Single sample bottle (1 x 10 Litre HD-PE) X X X
Single sample bottle (1 x 5 Litre DURAN glass) X X X
Single sample bottle (1 x 10 Litre DURAN glass) X X X
Distributor system HD-PE (2 x 1,5 Litre HD-PE sample bottles) X
Distributor system PTFE (2 x 1,5 Litre DURAN glass sample bottles) X
Distributor system HD-PE (2 x 5 Litre HD-PE sample bottles) X X
Distributor system PTFE (2 x 5 Litre DURAN glass sample bottles) X X
Distributor system 2 x 5 Litre "Mercury"-Execution X
Distributor system HD-PE (9 x 1 Litre HD-PE sample bottles) X X (X)
Distributor system PTFE (9 x 1 Litre DURAN glass sample bottles) X X
Dry sample container unit
Dry sample container unit with HD-PE container –
X X X X
heated or unheated
Dry sample container unit with DURAN container –
X X X X
heated or unheated
Sensor type
NRS 80 X X X X
RS 85 OP (no snow catching pins) X X X X
RS 85 X X X X
IRSS 88 X X X X
Funnel type
HD-PE-funnel with HD-PE-funnel outlet X X X X
DURAN glass funnel with PTFE-funnel outlet X X X
DURAN glass funnel with glass connector and glass pipe X X X
Accessories
Stand base for the collector / monitor X X X X
Stand for precipitation sensor, 1,5 m high, stainless steel anodized X X X X
Working hour meter X X X X
Mini-Event Data logger X X X -
SC-card logger (only in combination with memory or serial signal PCB) X X X X
Signal PCB Type NSA X X X -
Signal PCB Type NSA Serial X X X -
Signal PCB Type NSA Memory X X X -
Signal PCB Type NMO - - - X
Signal PCB Type NMO Serial - - - X
Signal PCB Type NMO Memory X
* Only with some models

SPECIAL CUSTOMIZED DESIGNS
PRECIPITATION COLLECTOR NSA 181/KD – MERCURY
for 2 weekly samples, with constant cooling and specialized for mercury samples
NSA 181/KHD – Mercury

with “snow top” option for mountain applications
BASED ON PRECIPITATION COLLECTOR NSA 181/K – SERIES
Advanced options:
 special distribution system with magnetic valves – shut to the environment during times of no
precipitation
 Special snow top ( optional )
 chemically neutral material of single components (DURAN glass and PTFE)
Page: 34
PRECIPITATION COLLECTOR NSA 181/KD - VMM

for 2 weekly samples, with constant cooling
NSA 181/KD - VMM

Including data logging system
Advanced options:
 Special distribution system with 3 bottles
 Signals for:
 Bottle position
 Failure temperature sample room
 Failure distributor
 Door signal
 Data logging including GSM data transfer

PRECIPITATION COLLECTOR NSA 181/KHT
for 3 weekly samples, with constant cooling
NSA 181/KHT
with “snow top” option for mountain applications
Advanced options:
 Special distribution system with 3 bottles
 Special snow top ( optional )
 Signals for:
 Bottle position
 Failure temperature sample room
 Failure distributor
 Door signal
Page: 36
PRECIPITATION COLLECTOR UNS 130/E - BATTERY

for single sample bottle
UNS 130/E
Low power consumption with solar and/or battery
supply
BASED ON PRECIPITATION COLLECTOR UNS 130 – SERIES
Advanced options:
 Low power consumption
 Precipitation sensor IRSS 88
 Battery supply / solar power supply
 Automatic switch for 230 V AC / 12 V DC battery

Catalogue Collector 1607

Uploaded by

Copyright:

Available Formats

Catalogue Collector 1607

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Catalogue Collector 1607

Uploaded by

Copyright:

Available Formats

AUTOMATIC

PRECIPITATION SAMPLER (COLLECTOR)

RESERVATION OF PROPRIETARY RIGHTS

THIS CATALOGUE IS PUBLISHED BY:

 All rights reserved – year 2014

UNIT OVERVIEW – CONTENT

Page: 3 Specifications are subject to change without prior notice, E & OE

Specific applications or adaptations to special environment conditions are possible.

German EPA measuring site on Sylt Island

 Suitable for all year use

EIGENBRODT® FOG SAMPLERS

(Schematic view of the FOG SAMPLER

Functionality NES 210 NES 215 ANES 220

▬: not available O: optional available : Standard feature of this type

Page: 5 Specifications are subject to change without prior notice, E & OE

SPECIFICATIONS CONTENS OF DELIVERED PROGRAM

Robust construction due to die cast aluminium

SPECIFICATIONS CONTENS OF DELIVERED PROGRAM

Page: 7 Specifications are subject to change without prior notice, E & OE

AUTOMATIC FOG SAMPLER ANES 220

Fog sampler Control unit

Page: 9 Specifications are subject to change without prior notice, E & OE

CONTROL OF AUTOMATIC OPERATION

CLIMATE CONTROL FOR THE SAMPLE

DATA LOGGING (OPTIONAL)

SPECIFICATIONS CONTENS OF DELIVERED PROGRAM

NILU PARTICLE FALLOUT COLLECTOR AND PRECIPITATION COLLECTOR

The NILU Particulate Fallout Collector and the NILU

Page: 11 Specifications are subject to change without prior notice, E & OE

 Collector with lid

Specifications SF 1 CONTENS OF DELIVERED PROGRAM

THE NILU PARTICULATE FALLOUT COLLECTOR RS1

SPECIFICATIONS RS 1 CONTENS OF DELIVERED PROGRAM

BULK SAMPLER BUS 125/KE

a total precipitation collector for obtaining samples for the analysis

 Sample cooled to approximately 5° C for storage

SPECIFICATIONS CONTENS OF DELIVERED PROGRAM

Page: 13 Specifications are subject to change without prior notice, E & OE

AUTOMATIC PRECIPITATION SAMPLER UNS 130/E AND UNS 130/D

one sample bottle, for universal use

 Funnel, 500 cm² collection surface

Page: 15 Specifications are subject to change without prior notice, E & OE

UNS 130/D 2-fold sample bottle insert with

NSA 161/R T-N PRECIPITATION SAMPLER

 Sampling of total deposition

SPECIFICATIONS CONTENS OF DELIVERED PROGRAM

Page: 17 Specifications are subject to change without prior notice, E & OE

AUTOMATIC PRECIPITATION SAMPLER NSA 181 – BASIC TYPE

 Compact instrument build up in modular

NSA 181/E (picture shows optional items)

Page: 19 Specifications are subject to change without prior notice, E & OE

Distribution of precipitation samples - configuration „D“ and „S“:

CONTENS OF DELIVERED PROGRAM IN GENERAL CONTENS OF DELIVERED PROGRAM SPECIFIC TO

 OPTION: AUTOMATIC PRECIPITATION SAMPLER NSA 181/K

NSA 181/KE - DURAN glass

 Compact instrument build up in modular structure, insulated

 Electronic control with SIEMENS® technology

Page: 21 Specifications are subject to change without prior notice, E & OE

Distribution of Precipitation samples - configuration „D“ and „S“: