10.2.2 VxComm UserGuide
10.2.2 VxComm UserGuide
http://www.icpdas.com/products/Software/VxComm/vxcomm.htm Page 1 of 8
VxComm 4/1/09 08:42
back
Search Servers
VxComm Utility can search the 7188E/PDS on local network (via UDP protocol).
Note: The firmware of 7188E/PDS should be v3.2.30[2/20/2008] or later.
Ping Server
The VxComm Utility can ping the 7188E/PDS by calling ping.exe that built-in Windows. The 7188E/PDS should be no network setting
problem if it response to ping successfully. This function can also be used to test if the IP is already occupied by other device.
http://www.icpdas.com/products/Software/VxComm/vxcomm.htm Page 2 of 8
VxComm 4/1/09 08:42
Users can set the PC side Server-Options in the “Advanced Options” page. Settings include Connection-Broken Time, Keep-Alive Time,
Connect Timeout, Command Port (TCP) and Virtual I/O Port (TCP).
http://www.icpdas.com/products/Software/VxComm/vxcomm.htm Page 3 of 8
VxComm 4/1/09 08:42
importing.
ICP DAS provides a configuration DLL for user’s program to import configuration from file just in a single function call. This enables user’s
system to support dynamic mappings between virtual COM ports and 7188E/PDS servers.
http://www.icpdas.com/products/Software/VxComm/vxcomm.htm Page 4 of 8
VxComm 4/1/09 08:42
http://www.icpdas.com/products/Software/VxComm/vxcomm.htm Page 5 of 8
VxComm 4/1/09 08:42
back
VXComm Driver
Type Files Size Ver. Update Download
Virtual COM Driver for Windows NT4.0, 2000/XP/2003 and Vista32 (32-bit).
http://www.icpdas.com/products/Software/VxComm/vxcomm.htm Page 6 of 8
VxComm 4/1/09 08:42
Adding / removing a 7188E/8000E server
Configuring the VxComm Driver.
Configuring the virtual COM port mappings.
Diagnostics & Trouble Shooting.
FAQ
Utility
Type Files Size Ver. Update Download
MiniOS7 and firmware download utility for Windows 95/98/NT/2000/XP, provides the configuration features for Ethernet/Internet
and COM port settings of 7188E/8000E. It's the easiest one that you can use to interact with MiniOS7. (See more)
MiniOS7 and firmware download utility, provides more features/commands to interact with MiniOS7. The 7188x.exe program is
designed for DOS while the 7188xw.exe program is for Win32 console mode. (See more)
Related Links:
. To Update MiniOS7
. To Download exe/firmware/files to 7188
. MiniOS7 Command List
. 7188 Utility Command List
To use the virtual COM ports, you should install the VxComm Driver on PC and run the VxComm Server on PDS-700/DS-700, so
VxComm Driver can then connect to the PDS-700/DS-700 and provides the COM port service.
If you are writing your TCP/IP client programs to access the PDS-700/DS-700 directly, please refer to the following document link.
This is the MiniOS7 OS image file for the PDS-700/DS-700 series controllers.
http://www.icpdas.com/products/Software/VxComm/vxcomm.htm Page 7 of 8
VxComm 4/1/09 08:42
To use the virtual COM ports, you should install the VxComm Driver on PC and run the VxComm Server on 7188En, so VxComm
Driver can then connect to the 7188En and provides the COM port service.
This is the MiniOS7 OS image file for the 7188E/8000E series controllers.
Solely developed for I-7188 and I-8000 series controllers;
Fast booting (about 0.1 second);
Updated OS image file is downloadable;
Directly controls I-7188 and I-8000 controllers;
Supports Flash memory and controller diagnosis;
back
Copyright© ICP DAS Co., Ltd. All Rights Reserved
http://www.icpdas.com/products/Software/VxComm/vxcomm.htm Page 8 of 8