Scribd
Upload
66 views16 pages

KT UserManual V1.0

This document provides instructions for connecting a biometric device to the internet using either LAN or WiFi. It then explains the process for installing and using three apps - InnaIT Driver, Precision Innait, and TAS Attendance. Precision Innait is used to enroll employee fingerprints by capturing scans of each finger twice. TAS Attendance allows employees to mark their attendance by placing their enrolled fingerprints on the scanner and selecting "In" or "Out".

Uploaded by

FCI chhola Office bhopal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
66 views16 pages

KT UserManual V1.0

This document provides instructions for connecting a biometric device to the internet using either LAN or WiFi. It then explains the process for installing and using three apps - InnaIT Driver, Precision Innait, and TAS Attendance. Precision Innait is used to enroll employee fingerprints by capturing scans of each finger twice. TAS Attendance allows employees to mark their attendance by placing their enrolled fingerprints on the scanner and selecting "In" or "Out".

Uploaded by

FCI chhola Office bhopal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 16

Implementation and Maintenance of Human

Resource Management System (HRMS)

Biometric Enrollment
Version 1.0

Jan 15, 2021


Revision History
Core HR
Version No. Date Version Detail Author
1.0 Jan 15, 2021 Initial Draft Sanjay Tiwari

TABLE OF CONTENTS

1. Introduction ..................................................................................................................................... 3
2. Connect Internet in Biometric device .............................................................................................. 3
2.1 LAN ................................................................................................................................... 3
2.2 WIFI .................................................................................................................................. 4
3. Biometric Apps ............................................................................................................................... 5
4. InnaIT Driver .................................................................................................................................. 6
5. Precision_Innait .............................................................................................................................. 7
5.1 Login ................................................................................................................................. 7
5.2 Enrollment......................................................................................................................... 8
6. TAS Attendance ............................................................................................................................ 13

[2] Private and Confidential


1. Introduction

Biometric Systems are automated methods of verifying or recognizing the identity of a living person on
the basis of some physiological characteristics, like a fingerprint or face pattern, or some aspects of
behavior, like handwriting or keystroke patterns. Some of the most used biometric characteristics are
shown in the picture below. A biometric system based on physiological characteristics is more reliable
than one which adopts behavioral features, even if the latter may be easier to integrate within certain
specific applications.

Using biometric characteristics is the only way to guarantee the presence of the owner when a transaction
is made. In particular fingerprint-based systems have been proven to be effective in protecting
information and resources in a large area of applications. At present, the amount of applications
employing biometric systems to secure transactions is quite limited. On one side, some barriers are
determined by the lack of familiarity (and in some cases, of acceptability) of the people, but, probably, the
most important reasons of the underdevelopment of biometrics in the past were the cost of the required
hardware/software and the insufficient performance. Nowadays technology leads to design low-cost
systems whose performance makes them well-suited for a broad range of applications.

2. Connect internet in Biometric Device

To connect biometric device with internet there are two options, a. LAN and b. Wifi

2.1. LAN- You can connect biometric device with internet through LAN cable. Port is given at the
bottom of the device,

[3] Private and Confidential


2.2. WIFI- You can also connect internet in biometric device through WIFI, this device runs on
android OS and there is a tablet installed in this device so process is similar as we connect our
android devices (Phone/ Tablet).
Go to setting >> Network and Internet >> Wi-Fi and click on “On” and choose the WIFI from the
list and enter password. Click on “CONNECT”, device will be connected with internet.
You can find WIFI option on the home screen, just swipe down on the top.

Click on “On” then WIFI device will be shown in the list and connect.

[4] Private and Confidential


When you click on WIFI device from the list then need to enter password and click on “Connect”
as shown below.

3. Biometric Apps
When WiFI is connected in biometric device, need to open App Drawer and there are 3 Apps that
need to use in sequence.
i. InnaIT Driver
ii. Precision_innait
iii. TAS

[5] Private and Confidential


4. InnaIT Driver- Need to click on InnaIT Driver then driver installation will be started and you
need to wait until close by itself.

[6] Private and Confidential


5. Precision Innait- Once InnaIT Drive closed by itself, then click on precesion_innait
then a pop up will be appeared (Allow the app InnaIT Driver to access the USB device?), check
the checkbox and then click on OK

[7] Private and Confidential


5.1. Login
Then application will be opened. You need to enter Employee ID and InnaIT Password as
“superadmin” and click on “Login” button.

5.2. Enrollment
When you clicked on Login button then app will be logged in and options will be appeared and
you need to click on ENROLLMENT menu.

[8] Private and Confidential


When you click on ENROLLMENT menu then it will expend sub menus and you need to click
on Manage Employee as shown below,

When you clicked on Manage Employee, search employee option will be opened and you need
search the employee, if you need to add more employees then you can use + icon,

[9] Private and Confidential


When you entered the employee number and click on the Search button then employee
information will be appeared and you need to click on the (3 dots) icon and then click on
edit option,

When you clicked on Edit option then employee information will be opened and you need to click
on Finger Prints option and select the finger on the screen, just click on the finger.

[10] Private and Confidential


When you click/ select the finger on the screen then fingerprint scanned will be activated and you
need to place the finger on the scanner in correct position and repeat this activity, your enrollment
will be done. Same finger need to place twice. When you place the finger first on the scanner then
ginger image of the left side will be colored in green. Then release the finger and place same
finger again and when both images will be green then finger captured successfully.

[11] Private and Confidential


When finger will be captured successfully then finger enrollment window will be closed by itself
and selected finger would be marked green as shown above. Finally need to click on Activate
button then screen will be opened as below.

Enter the remarks as Done, Captured etc. and click on the button. Fingerprint
successfully captured.

[12] Private and Confidential


6. TAS - Attendance

Open the app drawer and click on the TAS Icon as shown below.

[13] Private and Confidential


When click on the TAS Icon then app will be opened and need to select In or Out as shown below.

[14] Private and Confidential


After clicking on In or Out, place your finger on the fingerprint scanner.

[15] Private and Confidential


When place finger on the scanner get a message on the screen as shown below.

Thank you.

[16] Private and Confidential

You might also like