COC 3 Setup Computer Server by Group 3: Members

lOMoARcPSD|21102584
COC 3 Setup Computer Server
By Group 3
Members
Christian Cortez
Ronald Mark Dalajota
Louise Salise
Christian Sandot
Paul Vincent Bracoso
Jhon Micheal Mangmang
Mikhail Van Oliveros
Miraflor Roceno Fajurano
Din Pamisa
lOMoARcPSD|21102584
ICT-CSS 12
Specific Instructions:
A. Setup user access
Install windows server 2008 and windows 7 on virtual box application.

After installing windows server 2008 you have to configure few things before you
get started. Read and follow the instruction bellow.
1. Initial Configuration Task

- Go to Start>run>type OOBE
1. Set Time Zone -Change time zone into “Philippines”

2. Configure network -Click properties>Click Use following IP address
IP address-192.168.0.2
Subnet – 255.255.255.0
Default gateway – 192.168.0.2
3. Provide Computer name and domain

- Click Changes> Computer name: Server1>Click ok
4. Enable remote desktop - Select Allow connections from computers running

any version of remote desktop
5. Installing Active Directory Domain Server - Run the “dcpromo” >

Next >select Create new domain in a new forest >
Next> type ict.com > Select windows server 2008
R2>next>click “yes” > Create a password:
P@ssw0rd > check reboot.
- Log-in account using the password you created
6. Installing DHCP - click role>add role> select DHCP server > click
“validate” 192.168.0.2 > click add >
Add scope
Scope name: LAN_DHCP_LAB1
Starting IP : 192.168.0.100
Ending IP : 192.168.0.120
Subnet : 255.255.255.0
Default gateway: 192.168.0.2
Disable ipv6 stateless mode> click install
7. Joining client (windows 7) to domain (windows server 2008)
Note: You must be in windows 7 operating system.

-verify first if the windows7 has an IP
address assigned from the server.
-To verify just type CMD in the search menu or
press winkey+R the command prompt will be display
Type “ipconfig” the IP address will be display and it
should be like this:
Connection –specific DNS suffix…. : ict.com

Ipv4 address.............................................: 192.168.0.100
Subnet mask.............................................: 255.255.255.0
Default gateway......................................: 192.168.0.2
Note: if there is no IP address appeared on cmd

command prompt it mean there is something
wrong in your configuration.
)
lOMoARcPSD|21102584
If you already verify the network connection

and there is an IP address assigned from server
then proceed to the next step.
Go to start menu>all program> right click
“computer”> the system window will be display
Click “change setting” change the computer name
: “PC1” select domain and type “ict.com”
PC1
ict.com
A windows Security from the server will be display
User name : Administrator Password : P@ssw0rd
Windows 7 is now connected to the widows’ domain server
)
lOMoARcPSD|21102584
8. Creating active directory client user – note: you must be in windows

server OS.
Go to server manager> roles >
active directory domain services >
Active directory users and
computers > click ict.com >
Create Organizational Unit
Ict.com > right click > new

> organizational unit
Name: CSSLAB > OK
Right click on the left pane of

the window click new > user
Fill up fill-up the new object –user
First name: Juan
Last name:
user1 Full name:
user1
User logging name: user1
Set a password for your
account Password : P@ssw0rd1
Now windows 7 has already a

user account from the server
You can now login to the

user client using the account
you created from the server.
lOMoARcPSD|21102584
Print management services – click roles > add roles>

select print services and file services>
Configuring folder redirection - Create a folder with a file name

“redirection”> Right Click
folder>properties > click sharing
> click everyone > permission
level “co-owner”> done
-after the folder was shared, we will proceed to create a Group Policy
Management. Go to start > administrative tools >Group Policy Management
Right click the ict.com Domain>Organizational unit> create Org. Unit named
CSSLAB. Under CSSLAB
lOMoARcPSD|21102584
Right click and create GPO in this domain name it “redirection”
Your Policy is there we have to configure this one just right click on it and click edit.
Folder Redirection example
1. Right click the

Ondesktop folder
edit you haveand
this new
click properties
page, under the User
configuration click User will appear
2. Desktop properties
Configuration> Policies >
3. Click the
windows drop>down
settings folder
menu and
redirection select
> you can
“basic all the redirect’s
redirect folders on
everyone to the same
location”
lOMoARcPSD|21102584
Paste
Folder Redirection example
5. Just copy the network path

link of the folder redirection that
you created on the desktop.
:
6. Paste the path link of your
redirecttion folder on the
root path.
7. Click on settings and check or Folder Redirection created earlier on desktop

select the “move the contents of
the desktop to the new
location” and “also apply the
policy..etc” settings then ok.
8. Go to your windows 7 and

execute the CMD command and
type on the command prompt
“gpupdate /force” we need to
update to grab the settings
from the server that we
recently created.
Copy
lOMoARcPSD|21102584

COC 3 Setup Computer Server by Group 3: Members

Uploaded by

Copyright:

Available Formats

COC 3 Setup Computer Server by Group 3: Members

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

COC 3 Setup Computer Server by Group 3: Members

Uploaded by

Copyright:

Available Formats

lOMoARcPSD|21102584

COC 3 Setup Computer Server

A. Setup user access

Install windows server 2008 and windows 7 on virtual box application.

1. Initial Configuration Task

1. Set Time Zone -Change time zone into “Philippines”

3. Provide Computer name and domain

4. Enable remote desktop - Select Allow connections from computers running

5. Installing Active Directory Domain Server - Run the “dcpromo” >

7. Joining client (windows 7) to domain (windows server 2008)

Note: You must be in windows 7 operating system.

Connection –specific DNS suffix…. : ict.com

Note: if there is no IP address appeared on cmd

If you already verify the network connection

A windows Security from the server will be display

User name : Administrator Password : P@ssw0rd

Windows 7 is now connected to the widows’ domain server

8. Creating active directory client user – note: you must be in windows

Create Organizational Unit

Ict.com > right click > new

Name: CSSLAB > OK

Right click on the left pane of

Fill up fill-up the new object –user

First name: Juan

user1 Full name:

User logging name: user1

Set a password for your

account Password : P@ssw0rd1

Now windows 7 has already a

You can now login to the

Print management services – click roles > add roles>

Configuring folder redirection - Create a folder with a file name

Right click and create GPO in this domain name it “redirection”

Folder Redirection example

1. Right click the

5. Just copy the network path

7. Click on settings and check or Folder Redirection created earlier on desktop

8. Go to your windows 7 and

You might also like