Chemical Engineering: Outcome Based Education Scheme

CHE
AFFILIATED TO APJ ABDUL KALAM TECHNOLOGICAL UNIVERSITY, KERALA
CHEMICAL ENGINEERING
Outcome Based Education Scheme
AJCE 1
CHE
CONTENTS
1. OBE IMPLEMENTATION PLAN
2. VISION
3. MISSION
4. PROGRAM OUTCOME (PO)
5. PROGRAM EDUCATIONAL OBJECTIVE (PEO)
6. PROGRAM SPECIFIC OUTCOME (PSO)
7. COMPETENCIES & PERFORMANCE INDICATORS (CA & PI)
8. BLOOM'S TAXONOMY FOR ASSESSMENT DESIGN
9. TEACHING - LEARNING STRATEGIES
10. PO-CA-PI MAPPING SUMMARY
11. PEO-PO MAPPING
12. PEO-MISSION MAPPING
13. PROGRAM EXIT SURVEY
14. ALUMNI SURVEY
15. EMPLOYER SURVEY
16. COURSE OUTCOMES
17. COURSE END SURVEY
18. CO- PO MAPPING
19. CO- PSO MAPPING
20. COURSE – PO MAPPING
21. COURSE – PSO MAPPING
22. CONTINUOUS IMPROVEMENT IMPLEMENTED
AJCE 2
CHE
AJCE 3
CHE
VISION
B.Tech
Accomplish global recognition in the field of Chemical Engineering by generating highly efficient and committed
engineers, entrepreneurs and researchers who would excel in conventional as well as emerging areas.
M.Tech
MISSION
B.Tech
To provide high quality education and training in tune with the developments in Chemical Engineering.
To develop entrepreneurship skills for transforming knowledge into socially relevant quality products
To encourage research and development activities and industry-institute interactions for the technical
advancements of students.
To impart awareness of professional ethics, social responsibilities, and sustainable development for serving the
society
M.Tech
PROGRAM OUTCOME
B.Tech-Chemical Engineering
Sl.No. Outcome
At the end of the Program, a student shall be able to apply the knowledge of mathematics, science,
PO1 engineering fundamentals, and an engineering specialization to the solution of complex engineering
problems
At the end of the Program, a student shall be able to identify, formulate, review research literature,
PO2 and analyze complex engineering problems reaching substantiated conclusions using first principles
of mathematics, natural sciences, and engineering sciences.
At the end of the Program, a student shall be able to design solutions for complex engineering
problems and design system components or processes that meet the specified needs with appropriate
PO3
consideration for the public health and safety, and the cultural, societal, and environmental
considerations
At the end of the Program, a student shall be able to use research-based knowledge and research
PO4 methods including design of experiments, analysis and interpretation of data, and synthesis of the
information to provide valid conclusions.
At the end of the Program, a student shall be able to create, select, and apply appropriate techniques,
PO5 resources, and modern engineering and IT tools including prediction and modeling to complex
engineering activities with an understanding of the limitations.
At the end of the Program, a student shall be able to apply reasoning informed by the contextual
PO6 knowledge to assess societal, health, safety, legal and cultural issues and the consequent
responsibilities relevant to the professional engineering practice.
AJCE 4
CHE
At the end of the Program, a student shall be able to understand the impact of the professional
PO7 engineering solutions in societal and environmental contexts, and demonstrate the knowledge of, and
need for sustainable development.
At the end of the Program, a student shall be able to apply ethical principles and commit to
PO8
professional ethics and responsibilities and norms of the engineering practice.
At the end of the Program, a student shall be able to function effectively as an individual, and as a
PO9
member or leader in diverse teams, and in multidisciplinary settings.
At the end of the Program, a student shall be able to communicate effectively on complex engineering
activities with the engineering community and with society at large, such as, being able to
PO10
comprehend and write effective reports and design documentation, make effective presentations, and
give and receive clear instructions.
At the end of the Program, a student shall be able to demonstrate knowledge and understanding of
PO11 the engineering and management principles and apply these to one’s own work, as a member and
leader in a team, to manage projects and in multidisciplinary environments.
At the end of the Program, a student shall be able to recognize the need for, and have the preparation
PO12 and ability to engage in independent and life-long learning in the broadest context of technological
change.
M.Tech-Nano Technology
Sl.No. Outcome
PO1 Apply the knowledge of nanoscience and nanotechnology to solve engineering problems.
PO2 Identify and formulate complex synthesis routes for various nanomaterials.
Conduct investigations of nanomaterials using various advanced characterization techniques, analyze

PO3
and interpret data to draw valid conclusions.
PO4 Possess skills in the design of experiments, modeling and simulation related to nanotechnology.
Carry out laboratory work and multidisciplinary tasks involving nanometrology, material science,
PO5
nanochemistry and nanobiotechnology.
Process nanomaterials and develop nanofabrication techniques for NEMS, Nanosensors and related
PO6
applications.
Propagate their knowledge and address problems of social relevance such as energy, environment
PO7
and medicine through their specific electives .
PO8 Analyze the impact of nanomaterials on society including environment, health and ecosystem.
AJCE 5
CHE
PO9 Execute their own innovative ideas in the form of projects, product design and development.
PO10 Develop confidence for self-education and ability for lifelong learning.
PO11 Commit to professional and ethical responsibilities as an engineer.
Make use of their expertise in nanoscience and technology principles to manage multidisciplinary
PO12
projects as an individual or as a member or leader in a team.
M.Tech-Environmental Engineering
Sl.No. Outcome
An ability to independently carry out research /investigation and development work to solve practical
PO1
problems.
PO2 An ability to write and present a substantial technical report/document.
Students should be able to demonstrate a degree of mastery over the area as per the specialization of
PO3 the program. The mastery should be at a level higher than the requirements in the appropriate
bachelor program
PO4 Apply the knowledge of environmental sciences to solve engineering problems.
Possess skills in the design of experiments, modeling and simulation related to environmental
PO5
engineering.
Carry out laboratory work and multidisciplinary tasks involving microbiology, analytical techniques,
PO6
water and wastewater analysis, air and soil testing.
Update the knowledge on novel environmental remediation methodologies and design suitable
PO7
retrofits to improve the efficiency of the conventional methods practiced.
Propagate their knowledge and address problems of social relevance towards environment mitigation
PO8
strategies.
PO9 Execute their own innovative ideas in the form of projects, product design and development.
PO10 Develop confidence for self-education and ability for lifelong learning.
PO11 Commit to professional and ethical responsibilities as an engineer.
Make use of their expertise in environmental engineering and technology principles to manage
PO12
multidisciplinary projects as an individual or as a member or leader in a team.
AJCE 6
CHE
PhD-PHD CH
PROGRAM EDUCATIONAL OBJECTIVE
Sl.No. Objective
Our graduates shall excel as engineers or pursue higher studies in Chemical Engineering with a
PEO1
strong fundamental knowledge laid during undergraduate education.
PEO2 Our graduates shall practice as entrepreneurs with ethical attitude and social responsibility.
Our graduates shall exhibit an innovative approach for facing the current technical and environmental
PEO3
challenges faced by the society.
Sl.No. Objective
To become an effective environmental engineers in the industry, government or any other sector and
PEO1
implement sustainable environmental engineering practices.
PEO2 To provide solutions to environmental problems by applying acquired engineering knowledge.
PEO3 To continue lifelong learning and maintain technical and professional growth.
PhD-PHD CH
PROGRAM SPECIFIC OUTCOME
Sl.No. Outcome
Graduates of Chemical Engineering Program shall be able to successfully apply the knowledge of
PSO1 principles of science and engineering to identify and solve the real-life problems in Chemical
Engineering and allied areas.
Graduates of Chemical Engineering Program shall be able to foster research skills to develop
PSO2
sustainable solutions for Chemical Engineering problems.
Graduates of Chemical Engineering Program shall be able to acquire essential managerial skills and
PSO3
ethical values to develop oneself as a true leaderand a team player.
AJCE 7
CHE
Sl.No. Outcome
Successfully apply the knowledge of principles of Nanoscience and technology to identify and solve
PSO1
the real-life problems and develop novel applications in relevant areas.
PSO2 Foster research skills to develop sustainable innovations in interdisciplinary research areas.
Acquire essential managerial skills and ethical values to develop oneself as a true leader and a team
PSO3
player.
Sl.No. Outcome
To gain fundamental knowledge in the concepts of environmental pollution control strategies to

PSO1
combat the global issues on public health, safety, energy and environment.
To provide solutions by planning, designing, operating and monitoring environmental pollution control
PSO2
systems.
To identify research problems and carry out research either independently or in team in
PSO3
multidisciplinary environment.
PhD-PHD CH
COMPETENCIES & PERFORMANCE INDICATORS
1.1 Demonstrate competence in mathematical modelling
1.1.1 Apply mathematical techniques such as calculus, linear algebra. and statistics modelling to solve problems
1.1.2 Apply advanced mathematical techniques to model and solve engineering problems
1.2 Demonstrate competence in basic sciences
1.2.1 Apply laws of natural science to an engineering problem
1.3 Demonstrate competence in engineering fundamentals
1.3.1 Apply fundamental engineering concepts to solve engineering problems
1.4 Demonstrate competence in specialized engineering knowledge to the program
1.4.1 Apply engineering concepts to solve engineering problems
AJCE 8
CHE
2.1 Demonstrate an ability to identity and formulate complex engineering problem
2.1.1 Articulate problem statements and identify objectives
2.1.2 Identity engineering systems, variables, and parameters to solve the problems
2.1.3 Identify the mathematical, engineering and other relevant knowledge that applies to a given problem
2.2 Demonstrate an ability to formulate a solution plan and methodology for an engineering problem
2.2.1 Reframe complex problems into Interconnected sub-problems
2.2.2 Identify assemble and evaluate information and resources
Identify existing processes/solution methods for solving the problem including forming justified
2.2.3
approximations and assumptions
2.2.4 Compare and contrast alternative solution processes to select the best process
2.3 Demonstrate an ability to formulate and interpret a model
Combine scientific principles and engineering concepts to formulate model’s (mathematical or otherwise)
2.3.1
al a system or process that is appropriate in terms of applicability and required accuracy
Identity assumptions (mathematical and physical) necessary to allow modeling of a system at the level of
2.3.2
accuracy required
2.4 Demonstrate an ability to execute a solution process and analyze results
2.4.1 Apply engineering mathematics and computations to solve mathematical models
2.4.2 Produce and validate results through skillful use of contemporary engineering tools and models
2.4.3 Identify sources of error in the solution process, and limitations of the solution
2.4.4 Extract desired understanding and conclusions consistent with objectives and limitations of the analysis
3.1 Demonstrate an ability to define a complex open-ended problem in engineering terms
3.1.1 Recognize that need analysis is key to good problem definition
3.1.2 Elicit and document, engineering requirements from stakeholders
3.1.3 Synthesize engineering requirements from a review of the state-of-the-art
Extract engineering requirements from relevant engineering Codes and Standards such as ASME, ASTM,
3.1.4
BIS, ISO and ASHRAE
Explore and synthesize engineering requirements considering health, safety risks. environmental cultural
3.1.5
and societal issues
3.1.6 Determine design objectives, functional requirements and arrive at specifications
AJCE 9
CHE
3.2 Demonstrate an ability to generate a diverse set of alternative design solutions
3.2.1 Apply formal idea generation tools to develop multiple engineering design solutions
3.2.2 Build models/prototypes to develop a diverse set of design solutions
3.2.3 Identity suitable criteria for the evaluation of alternative design solutions
3.3 Demonstrate an ability to select an optimal design scheme for further development
3.3.1 Apply formal decision-making tools to select optimal engineering design solutions for further development
Consult with domain experts and stakeholders to select candidate engineering design solution for further
3.3.2
development
3.4 Demonstrate an ability to advance an engineering design to defined end state
3.4.1 Refine a conceptual design into a detailed design within the existing constraints of the resources)
3.4.2 Generate information through appropriate tests to improve or revise the design
Demonstrate an ability to conduct investigations of technical issues consistent with their level of knowledge
4.1
system and understanding
4.1.1 Define a problem, its scope and importance for purposes of investigation
Examine the relevant methods, tools and techniques of experiment design calibration, data acquisition,
4.1.2
analysis and presentation
4.1.3 Apply appropriate instrumentation and/or software tools to make measurements of physical quantities
4.1.4 Establish a relationship between measured data and underlying physical principles
4.2 Demonstrate an ability to design experiments to solve open-ended problems
4.2.1 Design and develop an experimental approach specify appropriate equipment and procedures
Understand the importance of the statistical design of experiments and choose an appropriate
4.2.2
experimental design plan based on the study objectives
4.3 Demonstrate an ability to analyze data and reach a valid conclusion
4.3.1 Use appropriate procedures, tools and techniques to conduct experiments and collect data
4.3.2 Analyze data for trends and correlations, stating possible errors and limitations
Represent data (in tabular and/or graphical forms) so as to facilitate analysis and explanation of the data,
4.3.3 and drawing of conclusions
Synthesize information and knowledge about the problem from the raw data to reach appropriate
4.3.4
conclusions
5.1 Demonstrate an ability to identify/ create modern engineering tools, techniques and resources
AJCE 10
CHE
Identify modern engineering tools such as computer-aided drafting, modeling and analysis techniques and
5.1.1
resources for engineering activities
5.1.2 Create adapt modify/extend tools and techniques to solve engineering problems
5.2 Demonstrate an ability to select and apply discipline-specific tools, techniques and resources
Identity the strengths and limitations of tools for (i) acquiring information (ii) modeling and simulating, (iii)
5.2.1
monitoring system performance, and (iv) creating engineering designs.
5.2.2 Demonstrate proficiency in using discipline-specific tools
5.3 Demonstrate an ability to evaluate the suitability and limitations of tools used to solve an engineering problem
5.3.1 Discuss limitations and validate tools, techniques and resources
Verify the credibility of results from tool use with reference to the accuracy and limitations, and the
5.3.2
assumptions inherent in their use
Demonstrate an ability to describe engineering roles in a broader context e.g. pertaining to the environment,
6.1
safety, health,legal and public welfare
Identify and describe various engineering roles: particularly as pertains to , protection of the public and
6.1.1
public interest at the global, regional and local level
6.2 Demonstrate an understanding of professional engineering regulations, legislation and standards
Interpret legislation, regulations, codes, and standards relevant to your discipline and explain its
6.2.1
contribution to the protection of the public
Demonstrate an understanding of the impact of engineering and industrial practices on social, environmental
7.1
and in economic contexts
7.1.1 Identity risks/impacts in the life-cycle of an engineering product or activity
Understand the relationship between the technical, socio-economic and environmental dimensions of
7.1.2
sustainability
7.2 Demonstrate an ability to apply principles of sustainable design and development
7.2.1 Describe management techniques tor sustainable development
Apply principles of preventive engineering and sustainable development to an engineering activity or

7.2.2
product relevant to the discipline
8.1 Demonstrate an ability to recognize ethical dilemmas
8.1.1 Identity situations of unethical professional conduct and propose ethical alternatives
8.2 Demonstrate an ability to apply the Code of Ethics
AJCE 11
CHE
8.2.1 Identity tenets of the ASME professional code of ethics
8.2.2 Examine and apply moral & ethical principles to known case studies
9.1 Demonstrate an ability to form a team and define a role for each member
9.1.1 Recognize a variety of working and learning preferences, appreciate the value of diversity on a team
Implement the norms of practice (e.g rules, roles, charters, agendas, etc.) of effective team work, to
9.1.2
accomplish a goal.
Demonstrate effective individual and team operations communication, problem-solving, conflict resolution and
9.2
leadership skills
9.2.1 Demonstrate effective communication, problem-solving conflict resolution and leadership skills
9.2.2 Treat other team members respectfully
9.2.3 Listen to other members
9.2.4 Maintain composure in difficult situations
9.3 Demonstrate success in a team-based project
9.3.1 Present results as a team with smooth integration of contributions from all Individual efforts
10.1 Demonstrate an ability to comprehend technical literature and document project work
10.1.1 Read, understand and interpret technical and non-technical information
10.1.2 Produce clear, well-constructed and well-supported written engineering documents
10.1.3 Create flow in a document or presentation - a logical progression of ideas so that the main point is clear
10.2 Demonstrate competence in listening, speaking, and presentation
10.2.1 Listen to and comprehend information Instructions and viewpoints of others
10.2.2 Deliver effective oral presentations to technical and non-technical audiences
10.3 Demonstrate the ability to integrate different modes of communication
10.3.1 Create engineering-standard figures, reports and drawings to complement writing and presentations
10.3.2 Use a variety of media effectively to convey a message in a document or a presentation
11.1 Demonstrate an ability to evaluate the Economic and financial performance of an engineering activity
11.1.1 Describe various economic and financial casts/benefits of an engineering activity
11.1.2 Analyze different forms of financial statements to evaluate the financial status of an engineering project
AJCE 12
CHE
Demonstrate an ability to compare and contrast the costs/benefits of alternate proposals for an engineering
11.2
activity
11.2.1 Analyze and select the most appropriate proposal based on economic and financial considerations
11.3 Demonstrate an ability to plan/manage an engineering activity within time and budget constraints
Identify the tasks required to complete an engineering activity and the resources required to complete the
11.3.1
tasks
Use project management tools to schedule an engineering project so it is completed on time and on
11.3.2
budget
12.1 Demonstrate an ability to identity gaps in knowledge and a strategy to close these gaps
12.1.1 Describe the rationale for the requirement for continuing professional development
Identity deficiencies or gaps in knowledge and demonstrate an ability to Source information to close this
12.1.2
gap
12.2 Demonstrate an ability to identify changing trends in engineering knowledge and practice
Identify historic points of technological advance in engineering that required practitioners to seek
12.2.1
education in order to stay current
Recognize the need and be able to clearly explain why it is vitally important to keep current regarding new
12.2.2
developments in your field
12.3 Demonstrate an ability to identify and access sources for new information
12.3.1 Source and comprehend technical literature and other credible sources of information
12.3.2 Analyze sourced technical and popular information for feasibility, viability, sustainability, etc.
AJCE 13
CHE
2.2.3
2.3.1
2.3.2
accuracy required
AJCE 14
CHE
3.1.4
BIS, ISO and ASHRAE
3.1.5
and societal issues
3.3.2
development
4.1
4.1.2
AJCE 15
CHE
4.2.2
4.3.3
and drawing of conclusions
4.3.4
conclusions
5.1.1
5.2.1
5.3.2
assumptions inherent in their use
Demonstrate an ability to describe engineering roles in a broader context e.g. pertaining to the environment,
6.1
6.1.1
6.2.1
7.1
AJCE 16
CHE
7.1.2
sustainability

7.2.2
product relevant to the discipline
9.1.2
accomplish a goal.
9.2
leadership skills
AJCE 17
CHE
11.2
activity
11.3.1
tasks
11.3.2
budget
Identity deficiencies or gaps in knowledge and demonstrate an ability to Source information to close this
12.1.2
gap
12.2.1
12.2.2
12.3.2 Analyze sourced technical and popular information for feasibility, viability, sustainability, etc.
AJCE 18
CHE
2.2.3
2.3.1
2.3.2
accuracy required
AJCE 19
CHE
3.1.4
BIS, ISO and ASHRAE
3.1.5
and societal issues
3.3.2
development
4.1
AJCE 20
CHE
4.1.2
4.2.2
4.3.3
and drawing of conclusions
4.3.4
conclusions
5.1.1
5.2.1
5.3.2
assumptions inherent in their use PO6
6.1 Demonstrate an ability to describe engineering roles in a broader context e.g. pertaining to the environment,
AJCE 21
CHE
6.1.1
6.2.1
7.1
7.1.2
sustainability

7.2.2
product relevant to the discipline PO8
9.1.2
accomplish a goal.
9.2
leadership skills
AJCE 22
CHE
11.2
activity
11.3.1
tasks
11.3.2
budget
AJCE 23
CHE
12.2.1
12.2.2
Analyze sourced technical and popular information for feasibility, viability, sustainability, etc. Nano
12.3.2
Technology
PhD-PHD CH
AJCE 24
CHE
BLOOM'S TAXONOMY FOR ASSESSMENT DESIGN
AJCE 25
CHE
TEACHING - LEARNING STRATEGIES
1. BLENDED LEARNING
2. BRAINSTORMING
3. CASE STUDY
4. COMPUTER AIDED PRESENTATION
5. COMPUTER LABS/LAPTOP INSTRUCTION
6. DEMONSTRATION
7. DIRECT INSTRUCTION
8. DISCOVERY LEARNING
9. DISCUSSION
10. DRILL AND PRACTICE
11. EXAMINATION
12. FLIPPED CLASS
13. FULLY ONLINE INSTRUCTION
14. GROUP ACTIVITIES
15. INQUIRY
16. LECTURE
17. MENTAL MODELING
18. MOOC ONLINE
19. PROJECT DEVELOPMENT
20. PROJECT PRESENTATION
21. QUESTION AND ANSWER
22. ROLE PLAY
23. SELF-LEARNING
24. SEMINAR
25. TUTORIAL
26. WEB-ENHANCED LEARNING
AJCE 26
CHE
PO-CA-PI MAPPING SUMMARY
PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
No CAs 4 4 4 3 3 2 2 2 3 3 3 3
No PIs 5 13 13 10 6 2 4 3 7 7 5 6
No CAs 4 4 4 3 3 2 2 2 3 3 3 3
No PIs 5 13 13 10 6 2 4 3 7 7 5 6
No CAs 4 4 4 3 3 2 2 2 3 3 3 3
No PIs 5 13 13 10 6 2 4 3 7 7 5 6
PhD-PHD CH
PEO-PO MAPPING
Correlation Levels: 1: Slight (Low), 2: Moderate (Medium), 3: Substantial (High), empty – no correlation
PEO/PO PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
PEO1 3 3 3 3 3 2 2 3 3 3
PEO2 3 2 3 3 3 3 3
PEO3 3 3 3 3 2 3 3 3
PEO1
PEO2
AJCE 27
CHE
PEO3
PhD-PHD CH
PEO-MISSION MAPPING
PEO/MISSION MS1 MS2 MS3 MS4
PEO1 3 2
PEO2 2 3 1 3
PEO3 2 2 3 2
PhD-PHD CH
PROGRAM EXIT SURVEY
Sl.No. The extent to which engineering education has enhanced your ability to:
Apply the knowledge of mathematics, physics, chemistry and basic engineering to solve Engineering
problems
1
Very Strong,Strong,Average,weak ,Very Weak
Identify, formulate and analyze complex Engineering problems and derive meaningful conclusions
using principles of mathematics, science and engineering
2
Design efficient processes and develop high quality products giving due consideration to safety,
environmental issues and economic aspects
3
Conduct investigation of complex Engineering problems using research based methods, analyze and
interpret data to draw valid conclusions
4 Very Strong,Strong,Average,weak ,Very Weak
AJCE 28
CHE
Acquire skills to select and use modern engineering tools and software for modeling, simulation and
solution of complex Engineering problems
5
Apply contextual knowledge to assess societal, health, safety, legal and cultural issues in professional
practice to become a responsible engineer
6
Understand the societal and environmental impacts of applying Engineering to solve real life problems
and practice sustainable development
7
Work with full commitment to professional and ethical responsibilities as an engineer

8
Work individually in a team or as a leader in any demanding or challenging environment

9
Communicate effectively with engineering community or the society at large through appropriate
reports, designs, presentations and instructions
10
Engage in life-long learning in the broadest context of developments in technology for continuous
professional development
11
Understand engineering and management principles and apply these to manage multidisciplinary
projects and finance as an individual or as a member or leader of a team
12
How frequently are you able to solve real life Chemical Engineering problems
13
Very frequently,Frequently,Rarely,Very rarely,Never
Do you agree that you have attained adequate skills to carry out research leading to sustainable
solutions for Chemical Engineering problems
14
AJCE 29
CHE
Strongly agree,Agree,Neutral,Disagree,Strongly disagree
Were the skills and ethical values acquired through this program helpful for your development as a
team leader.
15
Extremely helpful,Moderately helpful,Helpful,A little helpful,Not at all helpful
problems
1
2
3
4
5
6
AJCE 30
CHE

8

9
10
11
12
problems
1
2
3
AJCE 31
CHE
4
5
6
7

8

9
10
11
12
PhD-PHD CH
AJCE 32
CHE
problems
1
2
3
4
5
6
7

8
9
AJCE 33
CHE
10
11
12
ALUMNI SURVEY
Objective: Collect alumni views to help us improve our programs and assess the effectiveness of Outcome based
education framework adopted here.
Sl.No. Question
1 Name
2 Organization
3 Qualification secured from Amal Jyothi College of Engineering (AJCE)
4 Year of Graduation from AJCE
5 E-mail ID
6 Mobile No
Present Status
7
[Employed/ Entrepreneur/ Pursuing higher studies/ Working at home/ Other]
Present Employment level

8
[High managerial/ Middle Managerial /Low Managerial/ Non-managerial/Other]
Number of Years of experience at the present level
9 [above 10/ between 5 and 10/ between 2 and 5/ between 1 and 2/ less than 1]
AJCE 34
CHE
Is your present job in the core area of Engineering you have studied?
10
[very much/ strongly related / weakly related/ not at all related/ no relation to engineering at all]
How well have you been able to apply your knowledge of Mathematics, Science and Engineering
fundamentals for the solution of engineering problems in your work?
11
[very well/ somewhat well / rarely well/ not at all/ not applicable]
How well have you been able to identify, formulate and analyze complex Engineering problems and
derive meaningful conclusions using principles of mathematics, science and engineering in your work?
12
How well have you been able to design efficient processes and develop high quality products giving
due consideration to safety, environmental issues and economic aspects?
13
How well have you been able to conduct investigation of complex Engineering problems using
research based methods, analyze and interpret data to draw valid conclusions?
14
How well have you been able to select and use modern engineering tools and software for modeling,
simulation and solution of complex Engineering problems?
15
How well have you been able to apply contextual knowledge to assess societal, health, safety, legal
and cultural issues in your professional practice as a responsible engineer?
16
How well have you been able to understand the societal and environmental impacts of applying
Engineering to solve real life problems and practice sustainable development?
17
How well have you been able to work with full commitment to your professional and ethical
responsibilities as an engineer?
18
How well have you been able to work successfully as an individual, in a team or as a team leader in
any demanding or challenging environment?
19
AJCE 35
CHE
How well have you been able to communicate effectively through written and oral modes to all levels of
stakeholders in society?
20
How well have you been engaging yourself in life-long learning in the broadest context of
developments in technology for continuous professional development?
21
How well have you been able to apply engineering and management principles to manage
multidisciplinary projects as an individual or as a team member or team leader?
22
To what extent do you think you are able to apply your technical knowledge and take on higher
responsibilities in industry, academics and diverse fields of your engineering specialization?
23
How far you are in a position to pursue continual path of professional development, interspersed with
advanced education and continuing enhancement programs, relevant to your specific career goals?
24
How far you are able to channelize your knowledge base, business links and social contacts into
socially beneficial activities?
25
How far you able to provide effective and efficient real time solutions to Engineering problems in your
area, based on acquired knowledge so as to empower industry and society?
26
How far you are able to enhance research skills to develop sustainable solutions to Complex
Engineering problems in your area of work?
27
How far you have acquired managerial skills and ethical values to develop yourself as a true leader
and team player?
28
29 Other suggestions, if any:
EMPLOYER SURVEY
AJCE 36
CHE
Objective: Collect the views of Employers of our Graduates to help us improve our programs and assess the
effectiveness of Outcome based education framework practiced here.
Sl.No. Question
1 Name of the Company/Organization
2 Name of the person responding to this Survey
3 Address
4 E-mail ID
5 Mobile No
6 Present Status (Title/Designation)
7 No. of years of Experience in the Company/Organization
8 Please, indicate the Professional Background of the person responding to this survey
Please indicate the number of Alumni employed by your Company/ Organization, who have graduated
9
from Amal Jyothi College of Engineering (AJCE), who are considered for this Survey
How do you rate the level of engineering knowledge of our Graduate(s)?

10
[Excellent/ Good / Fair/ Needs improvement/ Not up to the mark]
How do you evaluate the technical competence/skills of our Graduate (s)?

11
How do you feel the Graduate(s) of AJCE were trained properly for carrying out the work in your
company/ organization?
12
How effectively can he/she use modern engineering tools to solve problems connected with his/her
assigned work?
13
Can the Graduate(s) work effectively as an individual or in a team to accomplish a common goal for
the company/organization?
14 [Excellent/ Good / Fair/ Needs improvement/ Not up to the mark]
AJCE 37
CHE
How far the Graduate(s) is/are able to lead a team of technical personnel to accomplish a given task
for the company/organization?
15
How well the Graduate(s) can work in a collaborative multidisciplinary professional work group in your
organization?
16
How active Is/are the Graduate(s) as a member(s) of any professional society or organization?
17
How far the Graduate is interested to enhance his/her professional skills by attending short courses/
workshops, training programs or conferences/ meetings?
18
How far the Graduate is interested in enhancing his qualifications by enrolling for higher Degrees, like
M Tech., MBA, Ph D etc.?
19
How satisfied are you with the communication skills of our Graduate(s)?
20
How far our Graduate(s) have the technical skills to design, develop, implement and modify integrated
projects in the field of his/her engineering specialization?
21
How do you rate the level of his/her integrity/adherence to ethical principles in his work?
22
How do you rate his/her efficiency to manage finance related matters in your company/organization?
23
How do you rate his/her concerns and awareness for environmental issues and sustainable
development?
24
Overall, how well satisfied are you with the performance of the AJCE Graduate(s)?
AJCE 38
CHE
25
25 Suggestions, if any, for molding our Graduates as still better engineers
COURSE OUTCOMES
SEMESTER-1
MA101
Course Code Course Name L-T-P:C Year of Introduction
MA101 CALCULUS 3-1-0:4 2016
No. Course Outcome - MA101 - CALCULUS Target
CO1 Apply the concept of convergence of infinite series to solve Engineering problems 60%
Apply the concept of maxima and minima of functions of two variables to solve Engineering
CO2 60%
problems
CO3 Apply calculus of vector-valued functions to dynamical quantities like velocity and acceleration 60%
CO4 Identify and use Multiple Integrals to evaluate surface area and volume 60%
CO5 Apply the concepts of Divergence and Curl to solve Engineering problems 60%
CO6 Demonstrate the application of vector calculus theorems to evaluate different integrals 60%
COURSE END SURVEY - MA101 - CALCULUS
Sl.No Questions & Options
To what extent you are able to apply the concept of convergence of infinite series to solve Engineering
problems
CO1
Answer Choice- Excellent/Very Good/Good/Fair/Poor
To what extent you are able to apply the concept of maxima and minima of functions of two variables to
solve Engineering problems
CO2
To what extent you are able to apply calculus of vector-valued functions to dynamical quantities like velocity
and acceleration
CO3
To what extent you are able to identify and use Multiple Integrals to evaluate surface area and volume
CO4
To what extent you are able to extent apply the concepts of Divergence and Curl to solve Engineering
problems
CO5
AJCE 39
CHE
To what extent you are able to demonstrate the application of vector calculus theorems to evaluate different
integrals
CO6
CO->PO MAPPING - MA101 - CALCULUS
CO/PO PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 3 3 3 3 2 2 2
CO2 3 3 3 3 2 2 2
CO3 3 3 3 3 2 2 2
CO4 3 3 3 3 2 2 2
CO5 3 3 3 3 2 2 2
CO6 3 3 3 3 2 2 2
CO->PSO MAPPING - MA101 - CALCULUS
CO/PSO PSO1 PSO2 PSO3
CO1 3 2
CO2 3 2
CO3 3 2
CO4 3 2
CO5 3 2
CO6 3 2
COURSE->PO MAPPING - MA101 - CALCULUS
MA101/PO
3 3 3 3 2 2 2
COURSE->PSO MAPPING - MA101 - CALCULUS
PSO1 PSO2 PSO3

MA101/PSO
3 2
PH100
PH100 Engineering Physics 3-1-0:4 2016
AJCE 40
CHE
No. Course Outcome - PH100 - Engineering Physics Target
Analyse different phenomena associated with the generation and propagation of oscillations and
CO1 65%
waves
CO2 Demonstrate wave-like phenomena associated with light and use them to measureits properties 60%
Illustrate the phenomenon of superconductivity and evaluate the properties of the superconducting
CO3 65%
state
Identify the features of quantum and statistical phenomena and demonstrate the dynamics of
CO4 65%
microscopic entities.
Describe the production and properties of acoustic and ultrasonic waves and demonstrate their
CO5 65%
applications.
Outline the construction and properties of different lasers and optoelectronic devices, and identify
CO6 65%
their applications
COURSE END SURVEY - PH100 - Engineering Physics
To what extent you are able to Analyse different phenomena associated with the generation and propagation
of oscillations and waves?
CO1
To what extent you are able to Demonstrate wave-like phenomena associated with light and use them to
measureits properties
CO2
To what extent you are able to Illustrate the phenomenon of superconductivity and evaluate the properties of
the superconducting state
CO3
To what extent you are able to Identify the features of quantum and statistical phenomena and demonstrate
the dynamics of microscopic entities.
CO4
To what extent you are able to Describe the production and properties of acoustic and ultrasonic waves and
CO5
To what extent you are able to Outline the construction and properties of different lasers and optoelectronic
devices, and identify their applications
CO6
CO->PO MAPPING - PH100 - Engineering Physics
CO1 3 2 2 2
CO2 3 2 2
AJCE 41
CHE
CO3 3 2 2
CO4 3 2 2
CO5 3 2 2
CO6 3 2 1 1
CO->PSO MAPPING - PH100 - Engineering Physics
CO1 3 1
CO2 3 1
CO3 3 1
CO4 3 1
CO5 3 1
CO6 3 1
COURSE->PO MAPPING - PH100 - Engineering Physics
PH100/PO
3 2 2 1 2
COURSE->PSO MAPPING - PH100 - Engineering Physics
PSO1 PSO2 PSO3

PH100/PSO
3 1
BE100
BE100 Engineering Mechanics 3-1-0:4 2016
No. Course Outcome - BE100 - Engineering Mechanics Target
CO1 Analyse reactions of various supports under equilibrium 55%
CO2 Determine the forces in planar and spatial systems 55%
CO3 Comprehend the properties of planes and solids 55%
CO4 Determine friction under static conditions 55%
CO5 Identify basic concepts of dynamic problems 55%
COURSE END SURVEY - BE100 - Engineering Mechanics
AJCE 42
CHE
To what extent you are able to analyse reactions of various supports under equilibrium?
CO1
Answer Choice- 5 out of 5/4 out of 5/3 out of 5/2 out of 5/1 out of 5
To what extent you are able to determine the forces in planar and spatial systems?
CO2
To what extent you are able to comprehend the properties of planes and solids?
CO3
To what extent you are able to determine friction under static conditions?
CO4
To what extent you are able to identify basic concepts of dynamic problems?
CO5
CO->PO MAPPING - BE100 - Engineering Mechanics
CO1 3 3 3 2 2
CO2 3 3 3 3
CO3 3 3 2 2 2
CO4 3 3 3 3 2
CO5 3 3 2 2 2
CO->PSO MAPPING - BE100 - Engineering Mechanics
CO1 3 2
CO2 3 2
CO3 3 2
CO4 3 2
CO5 3 1
COURSE->PO MAPPING - BE100 - Engineering Mechanics
BE100/PO
3 3 3 3 2
COURSE->PSO MAPPING - BE100 - Engineering Mechanics
PSO1 PSO2 PSO3

BE100/PSO
3 2
AJCE 43
CHE
BE103
BE103 Introduction to Sustainable Engineering 2-0-1:3 2016
No. Course Outcome - BE103 - Introduction to Sustainable Engineering Target
CO1 Explain the role of engineering in sustainable development and environmental protection 60%
CO2 Describe global environmental issues and the consequent threats to sustainable development 61%
CO3 Apply simple, efficient and indigenous solutions to assess and overcome threats to sustainability 60%
CO4 Identify and apply engineering methods and eco-friendly solutions to maintain a green environment 60%
Demonstrate the relevance of non-conventional energy sources for sustainable development of the
CO5 61%
society
CO6 Recognize the role of technology in the sustainable development of society and industry 61%
COURSE END SURVEY - BE103 - Introduction to Sustainable Engineering
To what extent are you able to explain the role of engineering in sustainable development and environmental
protection
CO1
To what extent are you able to describe global environmental issues and the consequent threats to
sustainable development
CO2
To what extent are you able to apply simple, efficient and indigenous solutions to assess and overcome
threats to sustainability
CO3
To what extent are you able to Identify and apply engineering methods and eco-friendly solutions to maintain
a green environment
CO4
To what extent are you able to demonstrate the relevance of non-conventional energy sources for
sustainable development of the society
CO5
To what extent are you able to recognize the role of technology in the sustainable development of society
and industry
CO6
CO->PO MAPPING - BE103 - Introduction to Sustainable Engineering
AJCE 44
CHE
CO1 2 3 3 3 2 2
CO2 3 3 3 3 3 2 2 3
CO3 3 3 3 3 2 3 3 2 2
CO4 3 3 3 2 3 3 3 2 3 2
CO5 2 3 3 3
CO6 3 2 3 3 3
CO->PSO MAPPING - BE103 - Introduction to Sustainable Engineering
CO1 2 1
CO2 2 1
CO3 2 2 1
CO4 3 2 1
CO5 2 1
CO6 2 2 1
COURSE->PO MAPPING - BE103 - Introduction to Sustainable Engineering
BE103/PO
3 3 3 3 3 3 3 3 2 2 3 3
COURSE->PSO MAPPING - BE103 - Introduction to Sustainable Engineering
PSO1 PSO2 PSO3

BE103/PSO
3 2 1
PH110
PH110 Engineering Physics Lab 0-0-2:1 2016
No. Course Outcome - PH110 - Engineering Physics Lab Target
CO1 Measure basic physical quantities, such as voltage, frequency, temperature etc and evaluate 70%
measurement accuracy.
Measure and analyse the properties of electrical and acoustic waves and oscillations, and
CO2 70%
demonstrate resonance.
Demonstrate wave-like properties of light and measure the wavelength of monochromatic light
CO3 70%
sources
AJCE 45
CHE
CO4 Illustrate the propagation of light through an optical fibre and measure its numerical aperture 70%
CO5 Demonstrate the working of devices such as solar cells and photoelectric cells 70%
Organize an experimental set up and measure fundamental constants such as the Planck’s
CO6 70%
constant.
COURSE END SURVEY - PH110 - Engineering Physics Lab
To what extent you are able to Measure basic physical quantities, such as voltage, frequency, temperature
etc and evaluate measurement accuracy.
CO1
To what extent you are able to Measure and analyse the properties of electrical and acoustic waves and
oscillations, and demonstrate resonance.
CO2
To what extent you are able to Demonstrate wave-like properties of light and measure the wavelength of
monochromatic light sources
CO3
To what extent you are able to Illustrate the propagation of light through an optical fibre and measure its
numerical aperture
CO4
To what extent you are able to Demonstrate the working of devices such as solar cells and photoelectric
cells
CO5
To what extent you are able to Organize an experimental set up and measure fundamental constants such
as the Planck’s constant.
CO6
CO->PO MAPPING - PH110 - Engineering Physics Lab
CO1 3 2 2 2 2 2
CO2 3 3 2 2 2 2
CO3 3 3 2 2 2 2
CO4 3 3 2 2 2 2
CO5 3 2 2 2 2 2
CO6 2 3 2 3 2 2
CO->PSO MAPPING - PH110 - Engineering Physics Lab
AJCE 46
CHE
CO1 3 2
CO2 3 2
CO3 3 2
CO4 3 2
CO5 3 2
CO6 2 2
COURSE->PO MAPPING - PH110 - Engineering Physics Lab
PH110/PO
3 3 2 3 2 2
COURSE->PSO MAPPING - PH110 - Engineering Physics Lab
PSO1 PSO2 PSO3

PH110/PSO
3 2
CY100
CY100 Engineering Chemistry 3-1-0:4 2016
No. Course Outcome - CY100 - Engineering Chemistry Target
CO1 Demonstrate the principles of spectroscopy and apply them to explain chemical phenomena 0%
CO2 Illustrate principles and applications of various electrochemical techniques and cells. 60%
Discuss instrumental methods like chromatography, conductivity and thermal analysis for chemical
CO3 60%
analysis.
Recognize the properties and applications of engineering materials, such as polymers and
CO4 60%
nanomaterials
CO5 Evaluate the properties of complex chemicals such as fuels and lubricants. 60%
CO6 Describe the properties of water and identify methods for water purification 60%
COURSE END SURVEY - CY100 - Engineering Chemistry
To what extent you are able to demonstrate the principles of spectroscopy and apply them to
explainchemical phenomena
CO1
To what extent you are able to Illustrate principles and applications of various electrochemical techniques
and cells.
CO2
AJCE 47
CHE
To what extent you are able to discuss instrumental methods like chromatography, conductivity and thermal
analysis for chemical analysis.
CO3
To what extent you are able to recognize the properties and applications of engineering materials, such as
polymers and nanomaterials
CO4
To what extent you are able to evaluate the properties of complex chemicals such as fuels and lubricants.
CO5
To what extent you are able to describe the properties of water and identify methods for water purification
CO6
CO->PO MAPPING - CY100 - Engineering Chemistry
CO1 3 3 2 2 3 3 3 3
CO2 3 3 2 3
CO3 3 3 2 3 2
CO4 3 2 2 2 3
CO5 3 2 3 3 3 3
CO6 3 2 3 2 2
CO->PSO MAPPING - CY100 - Engineering Chemistry
CO1 3 2
CO2 3 2
CO3 3 2
CO4 3 2
CO5 3 2
CO6 3 2
COURSE->PO MAPPING - CY100 - Engineering Chemistry
CY100/PO
3 3 2 2 3 3 3 3 3
COURSE->PSO MAPPING - CY100 - Engineering Chemistry
AJCE 48
CHE
PSO1 PSO2 PSO3

CY100/PSO
3 2
CH110
CH110 Chemical Engineering Workshops 0-0-2:1 2016
No. Course Outcome - CH110 - Chemical Engineering Workshops Target
CO1 Prepare commercial products like soaps, pigments and biodisel 65%
CO2 Measure the specific gravity of sloutions and flash and fire points of fuels 70%
CO3 Demonstrate the use of mass transfer equipment like distillation column and absorption column 70%
CO4 Illustarte the use of heat transfer equipment like heat exchanger 70%
CO5 Demonstrate the operation of size reduction equipment 70%
COURSE END SURVEY - CH110 - Chemical Engineering Workshops
How far can you prepare prepare products like soaps, pigments and biodiesel?
CO1
Answer Choice- Very satisfied/Satisfied/Neither satisfied nor dissatisfied/Dissatisfied /Very dissatisfied
How far can you measure specific gravity of solutions and flash and fire points of fuels?
CO2
To what extent you can demonstrate the working of mass transfer equipment?
CO3
Answer Choice- Excellent/Very Good/Good/Satisfactory/Poor
How far can you illustrate the working of heat transfer equipment?
CO4
Answer Choice- Excellent/Very Good/Good Satisfactory/Needs improvement
To what extent can you operate size reduction equipment?

CO5
Answer Choice- Very advanced/Advanced/Proficient/Basic/ Minimal
CO->PO MAPPING - CH110 - Chemical Engineering Workshops
CO1 3 3 2 1 1 1 3 3 1
CO2 3 1 2 2 2
CO3 3 3 2 2 2
AJCE 49
CHE
CO4 3 3 2 2 2
CO5 3 3 2 2 2
CO->PSO MAPPING - CH110 - Chemical Engineering Workshops
CO1 3 1 2
CO2 2 1
CO3 3 1 1
CO4 3 1 1
CO5 3 1 1
COURSE->PO MAPPING - CH110 - Chemical Engineering Workshops
CH110/PO
3 3 3 2 1 1 1 3 3 1
COURSE->PSO MAPPING - CH110 - Chemical Engineering Workshops
PSO1 PSO2 PSO3

CH110/PSO
3 1 2
BE10106
BE10106 Introduction to Chemical Engineering 2-1-0:3 2016
No. Course Outcome - BE10106 - Introduction to Chemical Engineering Target
CO1 Demonstrate the relevance of Chemical Engineering and its relation to other disciplines. 65%
CO2 Identify the concept of concentration of solutions and unit conversions. 65%
CO3 Identify and enlist chemical processes, operations and the corresponding equipment. 65%
CO4 Demonstrate the basics of heat transfer and reaction engineering. 65%
CO5 Evaluate instrumentation requirements and control strategies related to chemical engineering. 65%
CO6 Evaluate and asses the environmental aspects of Chemical Engineering. 65%
COURSE END SURVEY - BE10106 - Introduction to Chemical Engineering
To what extent you are able to demonstrate the relevance of Chemical Engineering and its relation to other
disciplines.
CO1
AJCE 50
CHE
How far you are able to use your knowledge on concentration of solutions and unit conversions.
CO2
To what extent you are able to list chemical processes, operations and the corresponding equipment.
CO3
To what extend you are able to demonstrate the basics of heat transfer and reaction engineering
CO4
To what extent you are able to evaluate instrumentation requirements and control strategies.
CO5
To what extent you are able to evaluate and assess environmental aspects of Chemical Engineering
CO6
CO->PO MAPPING - BE10106 - Introduction to Chemical Engineering
CO1 2 3 1 2 2 1 2 2 1 2 2
CO2 3 2 1 2 1 2 2 1 2 2
CO3 2 2 1 1 1 1 1 2 3 2 3
CO4 2 2 1 2 1 1 1 3 2 3 3
CO5 3 2 1 2 1 1 1 2 2 1 1
CO6 2 2 1 2 2 1 2 2 1 1 1 2
CO->PSO MAPPING - BE10106 - Introduction to Chemical Engineering
CO1 2
CO2 3
CO3 2 1
CO4 2 3
CO5 1 2
CO6 2 1 1
COURSE->PO MAPPING - BE10106 - Introduction to Chemical Engineering
BE10106/PO
3 3 1 2 2 2 2 2 3 3 3 3
AJCE 51
CHE
COURSE->PSO MAPPING - BE10106 - Introduction to Chemical Engineering
PSO1 PSO2 PSO3

BE10106/PSO
3 3 1
CY110
CY110 Engineering Chemistry Lab 0-0-2:1 2016
No. Course Outcome - CY110 - Engineering Chemistry Lab Target
CO1 Analyse and measure the quality of water and environmental pollution. 65%
CO2 Analyse and identify unknown compounds from spectral measurements. 65%
CO3 Prepare different polymers for industrial applications. 65%
CO4 Find the strength and pH of unknown solutions using different instrumental methods. 65%
CO5 Measure the percentage of metal present in metal ore. 65%
CO6 Apply and demonstrate theoretical concepts of Engineering Chemistry. 65%
COURSE END SURVEY - CY110 - Engineering Chemistry Lab
To what extent you are able to do analyse and measure the quality of water and environmental pollution.
CO1
To what extent you are able to do analyse and identify unknown compounds from spectral measurements.
CO2
To what extent you are able to prepare different polymers for industrial applications.
CO3
To what extent you are able to find the strength and pH of unknown solutions using different instrumental
methods.
CO4
To what extent you are able to measure the percentage of metal present in metal ore.
CO5
To what extent you are able to apply and demonstrate theoretical concepts of Engineering Chemistry.
CO6
CO->PO MAPPING - CY110 - Engineering Chemistry Lab
AJCE 52
CHE
CO1 3 2 2 1 3 3 3 2 3 2 2
CO2 3 2 2 1 3 3 2 3 2
CO3 3 2 2 1 2 2 3 2 3 2 2 3
CO4 3 2 3 1 3 3 3 3 2
CO5 3 2 3 1 3 3 3 3 2
CO6 3 2 2 1 3 3 3 2 3 2 2 2
CO->PSO MAPPING - CY110 - Engineering Chemistry Lab
CO1 3 2 1
CO2 3 2 1
CO3 3 2 1
CO4 3 2 1
CO5 3 2 1
CO6 3 2 1
COURSE->PO MAPPING - CY110 - Engineering Chemistry Lab
CY110/PO
3 2 3 1 3 3 3 2 3 2 2 3
COURSE->PSO MAPPING - CY110 - Engineering Chemistry Lab
PSO1 PSO2 PSO3

CY110/PSO
3 2 1
EE110
EE110 Electrical Engineering Workshop 0-0-2:1 2016
No. Course Outcome - EE110 - Electrical Engineering Workshop Target
Explain electrical power supplies and their limitations, standard voltages and their tolerances, safety
CO1 65%
aspects of electrical systems and the importance of protective measures in wiring systems.
CO2 Demonstrate different configurations of wires, cables and other accessories used in wiring circuits 65%
CO3 Demonstrate different lighting circuits for domestic and commercial buildings 65%
AJCE 53
CHE
CO4 Wire different lighting circuits for domestic and commercial buildings 65%
Distinguish between light and power circuits to control and measure circuit parameters such as
CO5 65%
current, voltage and power
COURSE END SURVEY - EE110 - Electrical Engineering Workshop
to what extend you are familiar with Electrical power supply and their limitations, knowledge of standard
voltages and their tolerances, safety aspects of electrical systems and the importance of protective
CO1 measures in wiring systems
wheather you gain the working knowledge of different configurations of wires, cables and other accessories
used in wiring circuits
CO2
Are you able to do different lighting circuits for domestic and commercial buildings
CO3
Answer Choice- Always/Very often/Sometimes/Rarely/Never
Are you able to wire up different lighting circuits for domestic and commercial buildings
CO4
Are you able to distinguish between light and power circuits to control and measure circuit parameters such
as current, voltage and power
CO5
CO->PO MAPPING - EE110 - Electrical Engineering Workshop
CO1 3 2 3 2 2 2 2 3
CO2 3 2 2 2 2
CO3 3 2 2 3
CO4 3 2 2 2 2 2 2 3
CO5 3 2 2 2
CO->PSO MAPPING - EE110 - Electrical Engineering Workshop
CO1 2 1
CO2 2 1
CO3 2 1
CO4 2 1
CO5 2 1
AJCE 54
CHE
COURSE->PO MAPPING - EE110 - Electrical Engineering Workshop
EE110/PO
3 2 2 2 3 2 2 2 2 3
COURSE->PSO MAPPING - EE110 - Electrical Engineering Workshop
PSO1 PSO2 PSO3

EE110/PSO
2 1
EE100
EE100 Basics of Electrical Engineering 2-1-0:3 2016
No. Course Outcome - EE100 - Basics of Electrical Engineering Target
CO1 Summarize the basics of electrical engineering applied to various engineering problems 60%
CO2 Perform mathematical analysis of electric circuits and its power measurement 60%
CO3 Illustrate the basics of magnetism and apply it to electric machines 60%
CO4 Assess the basic structure of machines and power systems 60%
CO5 Evaluate the basic circuits and machines used in real world 60%
COURSE END SURVEY - EE100 - Basics of Electrical Engineering
Are you able to solve basics electrical engineering problems

CO1
To what extent you are able to perform mathematical analysis of electric circuits and its power measurement
CO2
To what extent can you solve basic magnetic circuit problems?

CO3
To what extent you are able to assess the basic structure of machines and power systems
CO4
Are you able to evaluate the basic circuits and machines used in real world
CO5
CO->PO MAPPING - EE100 - Basics of Electrical Engineering
AJCE 55
CHE
CO1 3 2 3
CO2 3 3 3 2 2
CO3 3 2 2
CO4 3 2 2
CO5 3 3 2 3
CO->PSO MAPPING - EE100 - Basics of Electrical Engineering
CO1 3
CO2 3
CO3 3
CO4 3
CO5 3
COURSE->PO MAPPING - EE100 - Basics of Electrical Engineering
EE100/PO
3 3 3 2 2 2 3
COURSE->PSO MAPPING - EE100 - Basics of Electrical Engineering
PSO1 PSO2 PSO3

EE100/PSO
3
MAT101
MAT101 LINEAR ALGEBRA AND CALCULUS 3-1-0:4 2019
No. Course Outcome - MAT101 - LINEAR ALGEBRA AND CALCULUS Target
CO1 Solve systems of linear equations, diagonalize matrices and characterize quadratic forms 60%
CO2 Compute the partial and total derivatives and maxima and minima of multivariable functions 60%
Compute multiple integrals and apply them to find areas and volumes of geometrical shapes, mass
CO3 55%
and center of gravity of plane laminas
Perform various tests to determine whether a given series is convergent, absolutely convergent or
CO4 60%
conditionally convergent
CO5 Determine the Taylor and Fourier series expansion of functions and learn their applications 60%
AJCE 56
CHE
COURSE END SURVEY - MAT101 - LINEAR ALGEBRA AND CALCULUS
To what extent are you able to solve systems of linear equations, diagonalize matrices and characterise
quadratic forms ?
CO1
To what extent are you are able to compute the partial and total derivatives and maxima and minima of
multivariable functions ?
CO2
To what extent are you are able to compute multiple integrals and apply them to find areas and volumes of
geometrical shapes, mass and centre of gravity of plane laminas ?
CO3
To what extent are you are able to perform various tests to determine whether a given series is convergent,
absolutely convergent or conditionally convergent ?
CO4
To what extent are you able to determine the Taylor and Fourier series expansion of functions and learn
their applications ?
CO5
CO->PO MAPPING - MAT101 - LINEAR ALGEBRA AND CALCULUS
CO1 3 3 3 3 1 1
CO2 3 3 3 3 1 1
CO3 3 3 3 3 2 1
CO4 3 2 3 2 2 1
CO5 3 3 3 3 2 1
CO->PSO MAPPING - MAT101 - LINEAR ALGEBRA AND CALCULUS
CO1 3 1
CO2 3 1
CO3 3 1
CO4 3 1
CO5 3 1
COURSE->PO MAPPING - MAT101 - LINEAR ALGEBRA AND CALCULUS
AJCE 57
CHE
MAT101/PO
3 3 3 3 2 1
COURSE->PSO MAPPING - MAT101 - LINEAR ALGEBRA AND CALCULUS
PSO1 PSO2 PSO3

MAT101/PSO
3 1
PHT110
PHT110 ENGINEERING PHYSICS B 3-1-0:4 2019
No. Course Outcome - PHT110 - ENGINEERING PHYSICS B Target
CO1 Compute the quantitative aspects of waves and oscillations in engineering systems. 60%
Apply the interaction of light with matter through interference, diffraction and identify these
CO2 60%
phenomena in different natural optical processes and optical instruments.
Analyze the behaviour of matter in the atomic and subatomic level through the principles of
CO3 60%
quantum mechanics to perceive the microscopic processes in electronic devices.
Apply the knowledge of ultrasonics in non-destructive testing and use the principles of acoustics to
CO4 explain the nature and characterization of acoustic design and to provide a safe and healthy 60%
environment
Apply the comprehended knowledge about laser and fibre optic communication systems in various
CO5 60%
engineering applications
COURSE END SURVEY - PHT110 - ENGINEERING PHYSICS B
To what extent you are able to compute the quantitative aspects of waves and oscillations in engineering
systems
CO1
To what extent you are able to apply interference and diffraction in different natural optical processes and
optical instruments
CO2
To what extent you are able to analyze the behavior of matter in the atomic and subatomic level through the
principles of quantum mechanics ?. How can it be used to perceive the microscopic processes in electronic
CO3 devices ?
To what extent you are able to apply the knowledge of ultrasonics in non-destructive testing ?. How the
principles of acoustics can be used to improve acoustic design and to provide a safe and healthy
enviornment.
CO4
AJCE 58
CHE
To what extent you are able to apply laser and fibre optic communication systems in various engineering
applications
CO5
CO->PO MAPPING - PHT110 - ENGINEERING PHYSICS B
CO1 3 2 2 2 2
CO2 3 2 2 2
CO3 3 2 2 2
CO4 3 2 2 3
CO5 3 2 2 2 3
CO->PSO MAPPING - PHT110 - ENGINEERING PHYSICS B
CO1 1 1
CO2 3 1
CO3 3 3
CO4 3 2
CO5 3 2
COURSE->PO MAPPING - PHT110 - ENGINEERING PHYSICS B
PHT110/PO
3 2 2 2 2 3
COURSE->PSO MAPPING - PHT110 - ENGINEERING PHYSICS B
PSO1 PSO2 PSO3

PHT110/PSO
3 3
EC100
EC100 Basics of Electronics Engineering 2-1-0:3 2016
No. Course Outcome - EC100 - Basics of Electronics Engineering Target
CO1 Identify and select necessary components used in various electronic circuits. 60%
CO2 Design and organize simple circuits using different types of diodes and transistors 60%
AJCE 59
CHE
CO3 Demonstrate the working of analog circuits such as rectifiers, amplifiers and oscillators 60%
Illustrate the working of basic building blocks of analog and digital systems such as Operational
CO4 60%
amplifiers and Logic gates.
CO5 Demonstrate the use of basic measuring instruments used in electronics work. 70%
Compare and contrast various modulation techniques, communication systems and TV signal
CO6 70%
transmission techniques
COURSE END SURVEY - EC100 - Basics of Electronics Engineering
To what extent you are able to Identify and select necessary components used in various electronic circuits?
CO1
To what extent you are able to Design and organize simple circuits using different types of diodes and
transistors
CO2
To what extent you are able to Demonstrate the working of analog circuits such as rectifiers, amplifiers and
oscillators ?
CO3
To what extent you are able to Illustrate the working of basic building blocks of analog and digital systems
such as Operational amplifiers and Logic gates?
CO4
To what extent you are able to Demonstrate the use of basic measuring instruments used in electronics
work?
CO5
To what extent you are able to Compare and contrast various modulation techniques, communication
systems and TV signal transmission techniques ?
CO6
CO->PO MAPPING - EC100 - Basics of Electronics Engineering
CO1 3 2 2 1 2
CO2 3 2 2 1 2
CO3 3 2 2 1 2
CO4 3 2 2 1 2
CO5 3 2 2 1 2
CO6 3 2 2 1 2
CO->PSO MAPPING - EC100 - Basics of Electronics Engineering
AJCE 60
CHE
CO1 3
CO2 3
CO3 3
CO4 3
CO5 3
CO6 3
COURSE->PO MAPPING - EC100 - Basics of Electronics Engineering
EC100/PO
3 2 2 1 2
COURSE->PSO MAPPING - EC100 - Basics of Electronics Engineering
PSO1 PSO2 PSO3

EC100/PSO
3
EST100
EST100 ENGINEERING MECHANICS 2-1-0:3 2019
No. Course Outcome - EST100 - ENGINEERING MECHANICS Target
CO1 Revise the basic principles of statics and evaluate reactions under equilibrium 55%
CO2 Analyze planar and spatial force systems 55%
CO5 Identify basic concepts of kinetics and kinematics 55%
CO6 Assess the concept of vibrations 55%
COURSE END SURVEY - EST100 - ENGINEERING MECHANICS
To what extent are you able to revise the basic principles of statics and evaluate reactions under equilibrium
?
CO1
Answer Choice- Very high degree/High Degree/Moderate degree/Small Degree/Not at all
To what extent are you able to analyze planar and spatial force systems ?
CO2
AJCE 61
CHE
To what extent are you able to determine friction under static conditions ?
CO3
To what extent are you able to comprehend the properties of planes and solids ?
CO4
To what extent are you able to identify basic concepts of kinetics and kinematics ?
CO5
To what extent are you able to assess the concept of vibrations ?

CO6
Answer Choice- Extremely helpful/Moderately helpful/ Helpful/A little helpful/Not at all helpful
CO->PO MAPPING - EST100 - ENGINEERING MECHANICS
CO1 3 3 2 2 2
CO2 3 3 2 2 2
CO3 3 3 2 2 2
CO4 3 3 2 2 2
CO5 3 3 2 2 2
CO6 3 3 2 2 2
CO->PSO MAPPING - EST100 - ENGINEERING MECHANICS
CO1 2 1
CO2 1 1
CO3 2 1
CO4 2 1
CO5 2 1
CO6 2 1
COURSE->PO MAPPING - EST100 - ENGINEERING MECHANICS
EST100/PO
3 3 2 2 2
COURSE->PSO MAPPING - EST100 - ENGINEERING MECHANICS
PSO1 PSO2 PSO3
AJCE 62
CHE
EST100/PSO
2 1
est130
est130 BASICS OF ELECTRICAL & ELECTRONICS ENGINEERING 4-0-0:4 2019
No. Course Outcome - est130 - BASICS OF ELECTRICAL & ELECTRONICS ENGINEERING Target
CO1 Apply fundamental concepts and circuit laws to solve simple DC electric and magnetic circuits 60%
CO2 Develop and solve models of magnetic circuits 60%
CO3 Apply the fundamental laws of electrical engineering to solve simple ac circuits on steady state 60%
CO4 Identify and select necessary components used in various electronic circuits. 60%
Describe and outline the working principle of a voltage amplifier and electronic instrumentation
CO5 60%
system
CO6 Explain the principle of radio and cellular communication 60%
COURSE END SURVEY - est130 - BASICS OF ELECTRICAL & ELECTRONICS ENGINEERING
To what extent you are able to apply fundamental concepts and circuit laws to solve simple DC electric and
magnetic circuits
CO1
To what extent you are able to develop and solve models of magnetic circuits
CO2
To what extent you are able to apply the fundamental laws of electrical engineering to solve simple ac
circuits on steady state
CO3
To what extent you are able to identify and select necessary components used in various electronic circuits.
CO4
To what extent you are able to describe and outline the working principle of a voltage amplifier and
electronic instrumentation system
CO5
To what extent you are able to explain the principle of radio and cellular communication
CO6
CO->PO MAPPING - est130 - BASICS OF ELECTRICAL & ELECTRONICS ENGINEERING
AJCE 63
CHE
CO1 2 2 1 3 2
CO2 2 2 2
CO3 2 2
CO4 2 2
CO5 2 2 2
CO6 2 2 3 2
CO->PSO MAPPING - est130 - BASICS OF ELECTRICAL & ELECTRONICS ENGINEERING
CO1
CO2
CO3
CO4
CO5
CO6
COURSE->PO MAPPING - est130 - BASICS OF ELECTRICAL & ELECTRONICS ENGINEERING
est130/PO
2 2 1 3 2
COURSE->PSO MAPPING - est130 - BASICS OF ELECTRICAL & ELECTRONICS ENGINEERING
PSO1 PSO2 PSO3

est130/PSO
HUN101
HUN101 LIFE SKILLS 2-0-2:0 2019
No. Course Outcome - HUN101 - LIFE SKILLS Target
CO1 Define and identify different life skills required in personal and professional life (Remembering-1). 60%
Develop self- awareness and apply well-defined techniques to cope with emotions, and stress
CO2 60%
(Creating-6).
Examine the basic mechanics of effective communication and demonstrate through presentations
CO3 60%
(Applying-3).
AJCE 64
CHE
CO4 Judge a case or a situation by taking part in group discussions (Evaluating-5). 60%
CO5 Analyse and solve new problems using creative and critical thinking (Analysing-4). 60%
CO6 Discuss the basics of teamwork and leadership (Understanding-2). 60%
COURSE END SURVEY - HUN101 - LIFE SKILLS
I am able to define and identify different life skills required in personal and professional life.
CO1
I am able to develop self- awareness and apply well-defined techniques to cope with emotions, and stress.
CO2
I am able to examine the basic mechanics of effective communication and demonstrate through
presentations.
CO3
I am able to Judge a case or a situation by taking part in group discussions

CO4
I am able to analyse and solve new problems using creative and critical thinking
CO5
I am capable of form team and take leadership

CO6
CO->PO MAPPING - HUN101 - LIFE SKILLS
CO1 1 1 1 1 1 3 1 2 3 2 3 2
CO2 1 1 3 1 3 3 3 3 2
CO3 1 1 1 1 2 1 3 3 3 3 3
CO4 1 2 2 2 1 3 3 2 3 3
CO5 1 3 3 3 2 1 2 3 3 3 2 2
CO6 1 1 2 1 3 3 3 3 2
CO->PSO MAPPING - HUN101 - LIFE SKILLS
CO1
CO2
CO3
AJCE 65
CHE
CO4
CO5
CO6
COURSE->PO MAPPING - HUN101 - LIFE SKILLS
HUN101/PO
1 3 3 3 2 3 2 3 3 3 3 3
COURSE->PSO MAPPING - HUN101 - LIFE SKILLS
PSO1 PSO2 PSO3

HUN101/PSO
PHL120
PHL120 ENGINEERING PHYSICS LAB 0-0-2:1 2019
No. Course Outcome - PHL120 - ENGINEERING PHYSICS LAB Target
Apply modern instruments like CRO, strain gauge to measure the basic physical quantities viz.
CO1 frequency and amplitude of a wave pattern,strain etc. Carryout measurement of wave pattern in a 60%
stretched string and the corresponding frequency values using a Melde’s string apparatus.
Determine the wavelength of monochromatic beam of light and thickness of micro-thin object etc. by
forming Newton’s rings pattern and an air wedge fringe pattern. Carryout the measurement of
CO2 60%
wavelength by diffraction of plane transmission grating and the spectra formed by a monochromatic
beam of light and a laser.
CO3 Carryout the measurement of wavelength of a semiconductor diode Laser by grating. 60%
CO4 Evaluate the properties of a solar cell and LED through itsI-Vcharacteristics. 60%
CO5 Measurement of numerical aperture of an optic fibre 60%
COURSE END SURVEY - PHL120 - ENGINEERING PHYSICS LAB
1. To what extent you are able to apply modern instruments like CRO, strain gauge to measure the basic
physical quantities viz. frequency and amplitude of a wave pattern, strain etc. (b) Carryout measurement of
CO1 wave pattern in a stretched string and the corresponding frequency values using a Melde’s string apparatus.
2. To what extent you are able to determine the wavelength of monochromatic beam of light and thickness of
micro-thin object etc. by forming Newton’s rings pattern and an air wedge fringe pattern.
CO2
3. To what extent you are able to Carryout the measurement of wavelength of a semiconductor diode Laser
by grating.
CO3
AJCE 66
CHE
4. To what extent you are able to evaluate the properties of a solar cell and LED through itsI-
Vcharacteristics.
CO4
5. To what extent you are able to determine the losses and measure numerical aperture of an optic fibre
CO5
CO->PO MAPPING - PHL120 - ENGINEERING PHYSICS LAB
CO1 3 2 2 2 2
CO2 3 2 2 2 2
CO3 3 2 2 2 2
CO4 3 2 2 2 2
CO5 3 2 2 2 2
CO->PSO MAPPING - PHL120 - ENGINEERING PHYSICS LAB
CO1 2 1
CO2 2 1
CO3 2 1
CO4 2 1
CO5 2 1
COURSE->PO MAPPING - PHL120 - ENGINEERING PHYSICS LAB
PHL120/PO
3 2 2 2 2
COURSE->PSO MAPPING - PHL120 - ENGINEERING PHYSICS LAB
PSO1 PSO2 PSO3

PHL120/PSO
2 1
ESL130
ESL130 ELECTRICAL & ELECTRONICS WORKSHOP 0-0-2:1 2019
AJCE 67
CHE
No. Course Outcome - ESL130 - ELECTRICAL & ELECTRONICS WORKSHOP Target
CO1 Demonstrate safety measures against electric shocks 56%
Identify the tools used for electrical wiring, electrical accessories, wires, cables, batteries and
CO2 56%
standard symbols
Develop the connection diagram, identify the suitable accessories and materials necessary for
CO3 56%
wiring simple lighting circuits for domestic buildings
CO4 Identify and test various electronic components and equipments 56%
CO5 Draw circuit schematics with EDA tools 56%
CO6 Assemble and test electronic circuits on boards 56%
COURSE END SURVEY - ESL130 - ELECTRICAL & ELECTRONICS WORKSHOP
To what extent you are able to demonstrate safety measures against electric shocks
CO1
To what extent you are able to identify the tools used for electrical wiring, electrical accessories, wires,
cables, batteries and standard symbols
CO2
To what extent you are able to develop the connection diagram, identify the suitable accessories and
CO3 materials necessary for wiring simple lighting circuits for domestic buildings
To what extent you are able to identify and test various electronic components and equipments
CO4
To what extent you are able to draw circuit schematics with EDA tools
CO5
To what extent you are able to assemble and test electronic circuits on boards
CO6
CO->PO MAPPING - ESL130 - ELECTRICAL & ELECTRONICS WORKSHOP
CO1 1 2 2
CO2 1 2 3 1
CO3 2 1 3
CO4 1 2
CO5 2 2
AJCE 68
CHE
CO6 2
CO->PSO MAPPING - ESL130 - ELECTRICAL & ELECTRONICS WORKSHOP
CO1
CO2
CO3
CO4
CO5
CO6
COURSE->PO MAPPING - ESL130 - ELECTRICAL & ELECTRONICS WORKSHOP
ESL130/PO
2 1 2 3 1 2 2 1
COURSE->PSO MAPPING - ESL130 - ELECTRICAL & ELECTRONICS WORKSHOP
PSO1 PSO2 PSO3

ESL130/PSO
PHT100
PHT100 ENGINEERING PHYSICS A 3-1-0:4 2019
No. Course Outcome - PHT100 - ENGINEERING PHYSICS A Target
CO1 Compute the quantitative aspects of waves and oscillations in engineering systems. 58%
Apply the interaction of light with matter through interference, diffraction and identify these
CO2 58%
phenomena in different natural optical processes and optical instruments.
Analyze the behaviour of matter in the atomic and subatomic level through the principles of
CO3 58%
quantum mechanics to perceive the microscopic processes in electronic devices.
Classify the properties of magnetic materials and apply vector calculus to static magnetic fields and
CO4 58%
use Maxwell’s equations to diverse engineering problems
Analyze the principles behind various superconducting applications, explain the working of solid
CO5 58%
state lighting devices and fibre optic communication system
COURSE END SURVEY - PHT100 - ENGINEERING PHYSICS A
AJCE 69
CHE
To what extent are you able to compute the quantitative aspects of waves and oscillations in engineering
systems ?
CO1
To what extent are you able to apply interference and diffraction in different natural optical processes and
optical instruments ?
CO2
To what extent are you able to analyze the behavior of matter in the atomic and subatomic level through the
principles of quantum mechanics ?. How can it be used to perceive the microscopic processes in electronic
CO3 devices ?
To what extent are you able to classify the properties of magnetic materials and apply vector calculus to
static magnetic fields and use Maxwell’s equations to diverse engineering problems ?
CO4
To what extent are you able to apply the principles behind various superconducting applications, explain the
working of solid state lighting devices and fibre optic communication system ?
CO5
CO->PO MAPPING - PHT100 - ENGINEERING PHYSICS A
CO1 3 2 1
CO2 3 2 1
CO3 3 2 1
CO4 3 1 1
CO5 3 1 1
CO->PSO MAPPING - PHT100 - ENGINEERING PHYSICS A
CO1
CO2
CO3
CO4
CO5
COURSE->PO MAPPING - PHT100 - ENGINEERING PHYSICS A
PHT100/PO
3 2 1
AJCE 70
CHE
COURSE->PSO MAPPING - PHT100 - ENGINEERING PHYSICS A
PSO1 PSO2 PSO3

PHT100/PSO
SEMESTER-2
MA102
MA102 Differential Equations 3-1-0:4 2016
No. Course Outcome - MA102 - Differential Equations Target
Demonstrate the use of homogeneous differential equations for the solution of engineering
CO1 62%
problems
CO2 Solve non-homogeneous ordinary differential equations 60%
CO3 Demonstrate the properties and use of Fourier series and Euler’s formulas 60%
CO4 Illustrate the use of Partial differential equations and their solutions 62%
CO5 Apply partial differential equations and Fourier series to solve one - dimensional wave equations 60%
CO6 Apply partial differential equations and Fourier series to solve one - dimensional heat equations 60%
COURSE END SURVEY - MA102 - Differential Equations
To what extent you are able to demonstrate the use of homogeneous differential equations for the solution of
engineering problems
CO1
To what extent you are able to solve non-homogeneous ordinary differential equations
CO2
To what extent you are able to demonstrate the properties and use of Fourier series and Euler’s formulas
CO3
To what extent you are able to illustrate the use of Partial differential equations and their solutions
CO4
To what extent you are able to apply partial differential equations and Fourier series to solve one -
dimensional wave equations
CO5
To what extent you are able to apply partial differential equations and Fourier series to solve one -
dimensional heat equations
CO6
AJCE 71
CHE
CO->PO MAPPING - MA102 - Differential Equations
CO1 3 3 3 3 2 2
CO2 3 3 3 2 2
CO3 3 3 3 3 2
CO4 3 3 3 2 2
CO5 3 3 3 2 2
CO6 3 3 3 2 2
CO->PSO MAPPING - MA102 - Differential Equations
CO1 3 2
CO2 3 2
CO3 3 2
CO4 3 2
CO5 3 2
CO6 3 2
COURSE->PO MAPPING - MA102 - Differential Equations
MA102/PO
3 3 3 3 2 2
COURSE->PSO MAPPING - MA102 - Differential Equations
PSO1 PSO2 PSO3

MA102/PSO
3 2
CY100
CY100 Engineering Chemistry 3-1-0:4 2016
No. Course Outcome - CY100 - Engineering Chemistry Target
CO1 Demonstrate the principles of spectroscopy and apply them to explain chemical phenomena 65%
CO2 Illustrate principles and applications of various electrochemical techniques and cells. 65%
AJCE 72
CHE
Describe instrumental methods like chromatography, conductivity and thermal analysis for chemical
CO3 60%
analysis.
Recognize the properties and applications of engineering materials, such as polymers and
CO4 65%
nanomaterials
CO5 Evaluate the properties of complex chemicals such as fuels and lubricants. 65%
CO6 Describe the properties of water and identify methods for water purification 65%
COURSE END SURVEY - CY100 - Engineering Chemistry
To what extent you are able to explain the principles of spectroscopy and apply them to explain chemical
phenomena
CO1
To what extent you are able to explain the principles and applications of various electrochemical techniques
and cells.
CO2
To what extent you are able to apply instrumental methods like chromatography, conductivity and thermal
analysis for chemical analysis.
CO3
To what extent you are able to recognize the properties and applications of engineering materials, such as
polymers and nanomaterials
CO4
To what extent you are able to evaluate the properties of complex chemicals such as fuels and lubricants.
CO5
To what extent you are able to describe the properties of water and identify methods for water purification
CO6
CO->PO MAPPING - CY100 - Engineering Chemistry
CO1 3 3 2 2 3 3 3 3
CO2 3 3 2 3
CO3 3 2 3 2
CO4 3 2 2 2 3
CO5 3 2 2 3
CO6 3 2 2 3 2
CO->PSO MAPPING - CY100 - Engineering Chemistry
AJCE 73
CHE
CO1
CO2
CO3
CO4
CO5
CO6
COURSE->PO MAPPING - CY100 - Engineering Chemistry
CY100/PO
3 3 2 2 3 3 3 2 3
COURSE->PSO MAPPING - CY100 - Engineering Chemistry
PSO1 PSO2 PSO3

CY100/PSO
ME100
ME100 Basics of Mechanical Engineering 2-1-0:3 2016
No. Course Outcome - ME100 - Basics of Mechanical Engineering Target
CO1 Compare various cycles involved in different thermodynamic processes 61%
CO2 Analyze the working of various energy conversion devices 61%
CO3 Apply basic thermodynamic principles to refrigeration and air conditioning systems 61%
CO4 Discuss different parts of an automobile and related power transmission devices 61%
CO5 Demonstrate working knowledge on manufacturing processes and machining operations 61%
COURSE END SURVEY - ME100 - Basics of Mechanical Engineering
Students were able to understand various thermodynamic processes and cycles.

CO1
Answer Choice- Strongly Agree/Agree/Neutral Disagree/Strongly disagree
Students came to know and learn about various turbines, pumps, boilers and other energy conversion
devices
CO2
AJCE 74
CHE
Students learnt basics and working of various refregeration systems.

CO3
Students got acquainted with parts of an automobile and its power transmission systems.
CO4
Students were able to learn about various manufacturing processes and machines used for manufacturing.
CO5
CO->PO MAPPING - ME100 - Basics of Mechanical Engineering
CO1 3 2 2 2 1 2
CO2 3 2 2 2 1 2
CO3 3 2 2 2 1 2
CO4 3 2 1 1 1 2
CO5 3 2 2 2 1 2
CO->PSO MAPPING - ME100 - Basics of Mechanical Engineering
CO1 3 1
CO2 3 1
CO3 3 1
CO4 3 1
CO5 3 1
COURSE->PO MAPPING - ME100 - Basics of Mechanical Engineering
ME100/PO
3 2 2 2 1 2
COURSE->PSO MAPPING - ME100 - Basics of Mechanical Engineering
PSO1 PSO2 PSO3

ME100/PSO
3 1
BE110
BE110 Engineering Graphics 1-1-2:3 2016
AJCE 75
CHE
No. Course Outcome - BE110 - Engineering Graphics Target
Demonstrate Engineering Drawing Standards (as per BIS), dimensioning and preparation of
CO1 62%
drawings leading to illustration of Graphics as the communication language of Engineers
Interpret engineering drawings, leading to enhanced presentation skills of 3-D objects in 2-D plane /
CO2 62%
paper and improved visualizion of physical objects.
Apply the principles of orthographic projections of lines, solids and sectioned views in the design of
CO3 62%
pipeline systems.
Prepare isometric and perspective projections that help to reconstruct solutions to real-time
CO4 62%
engineering problems in 3D to provide better understanding.
Create surface development and generate projections of penetrated objects which will help to
CO5 62%
develop suitable models for industrial applications.
Recognize the importance of CAD software, and develop AutoCAD skills to transfer technical data
CO6 62%
and sketches into electronic drawing.
COURSE END SURVEY - BE110 - Engineering Graphics
To what extent you are able to demonstrate engineering drawing standards (as per BIS), dimensioning and
preparation of drawings leading to illustration of graphics as the communication language of engineers
CO1
To what extent you are able to interpret engineering drawings, leading to enhanced presentation skills of 3-D
objects in 2-D plane / paper and improved visualizion of physical objects.
CO2
To what extent you are able to apply the principles of orthographic projections of lines, solids and sectioned
views in the design of pipeline systems.
CO3
To what extent you are able to prepare isometric and perspective projections that help to reconstruct
solutions to real-time engineering problems in 3D to provide better understanding.
CO4
To what extent you are able to create surface development and generate projections of penetrated objects
which will help to develop suitable models for industrial applications.
CO5
To what extent you are able to recognize the importance of CAD software, and develop AutoCAD skills to
transfer technical data and sketches into electronic drawing.
CO6
CO->PO MAPPING - BE110 - Engineering Graphics
CO1 3 2 3 2 2 1 2 3
AJCE 76
CHE
CO2 3 2 2 3 2 3 2
CO3 3 2 3 2 2
CO4 3 2 3 1 1 2 2
CO5 3 2 2 1 3 2 2
CO6 2 3 2 1 3 2 3 3 2
CO->PSO MAPPING - BE110 - Engineering Graphics
CO1 3 1
CO2 3 1
CO3 3 1
CO4 3 1
CO5 3 1
CO6 3 1
COURSE->PO MAPPING - BE110 - Engineering Graphics
BE110/PO
3 3 3 1 3 2 2 1 3 3 3
COURSE->PSO MAPPING - BE110 - Engineering Graphics
PSO1 PSO2 PSO3

BE110/PSO
3 1
EC110
EC110 Electronics Engineering Workshop 0-0-2:1 2016
No. Course Outcome - EC110 - Electronics Engineering Workshop Target
Identify and select necessary components used in various electronic circuits and testing using a
CO1 76%
multimeter
Generate waveforms with required frequency and amplitude using function generator and measure
CO2 72%
voltage, frequency and phase of any waveform using CRO.
Analyze characteristics of simple circuits like rectifiers, multivibrators ,logic gates using transistors
CO3 72%
etc using bread board and soldering
CO4 Demonstrate the working of Public Address System 72%
AJCE 77
CHE
CO5 To simulate electronics circuits using LTSPICE and study the response 72%
COURSE END SURVEY - EC110 - Electronics Engineering Workshop
To what extent you are able to identify and select necessary components used in various electronic circuits
and testing using a multimeter
CO1
To what extent you are able to generate waveforms with required frequency and amplitude using function
generator and measure voltage, frequency and phase of any waveform using CRO.
CO2
To what extent you are able to analyze characteristics of simple circuits like rectifiers, multivibrators ,logic
gates using transistors etc using bread board and soldering
CO3
To what extent you are able to demonstrate the working of Public Address System
CO4
To what extent you are able to to simulate electronics circuits using LTSPICE and study the response
CO5
CO->PO MAPPING - EC110 - Electronics Engineering Workshop
CO1 3 3 3 2 2
CO2 3 2 2 3 2
CO3 3 2 3 2
CO4 3 3 2 2 3 2
CO5 3 2 3 2 3 2
CO->PSO MAPPING - EC110 - Electronics Engineering Workshop
CO1 2 1
CO2 2 1
CO3 2 1
CO4 2 1
CO5 2 1
COURSE->PO MAPPING - EC110 - Electronics Engineering Workshop
EC110/PO
AJCE 78
CHE
3 2 3 3 2 3 2 2
COURSE->PSO MAPPING - EC110 - Electronics Engineering Workshop
PSO1 PSO2 PSO3

EC110/PSO
2 1
BE102
BE102 Design & Engineering 2-0-2:3 2016
No. Course Outcome - BE102 - Design & Engineering Target
CO1 Identify the different elements involved in good designs and practice them when called for. 66%
Solve the different stages of Design and formulate detailed designs with solid modeling and
CO2 66%
visualization.
CO3 Develop the prototype and propose various stages towards final product design. 62%
Build a broader perspective of design covering the function, cost, environmental sensitivity, safety
CO4 62%
and factors other than from engineering analysis
CO5 Identify product oriented and user oriented aspects that make the customer required design. 60%
Utilize various modern engineering methods and build basic knowledge of Intellectual Property
CO6 62%
Rights.
COURSE END SURVEY - BE102 - Design & Engineering
How far you have been able to identify the different elements involved in good designs and practice them
when called for?
CO1
How far you have been able to solve the different stages of design and formulate detailed designs with solid
modeling and visualization?
CO2
How far you have been able to develop the prototype and propose various stages towards final product
design.
CO3
How far you have been able to build a broader perspective of design covering the function, cost,
environmental sensitivity, safety and factors other than from engineering analysis
CO4
How far you have been able to Identify product oriented and user oriented aspects that make the customer
required design?
CO5
AJCE 79
CHE
How far you have been able to utilize various modern engineering methods and build basic knowledge of
Intellectual Property Rights.
CO6
CO->PO MAPPING - BE102 - Design & Engineering
CO1 3 2 3 2 3 2 3 2
CO2 3 2 3 2 2 3
CO3 3 2 3 2 3 3 3
CO4 3 2 3 2 2 3 3 2
CO5 3 2 3 2
CO6 3 2 3 2 2 2 3 3 3
CO->PSO MAPPING - BE102 - Design & Engineering
CO1 3
CO2 2 2
CO3 2 2
CO4 3
CO5 2 2
CO6 2 2 2
COURSE->PO MAPPING - BE102 - Design & Engineering
BE102/PO
3 2 3 2 2 3 3 3 3 3 3 3
COURSE->PSO MAPPING - BE102 - Design & Engineering
PSO1 PSO2 PSO3

BE102/PSO
2 2 3
CY110
CY110 Engineering Chemistry Lab 0-0-2:1 2016
AJCE 80
CHE
No. Course Outcome - CY110 - Engineering Chemistry Lab Target
CO1 Analyse and measure the quality of water and environmental pollution. 70%
CO2 Analyse and identify unknown compounds from spectral measurements. 70%
CO3 Prepare different polymers for industrial applications. 70%
CO4 Find the strength and pH of unknown solutions using different instrumental methods. 70%
CO5 Measure the percentage of metal present in metal ore. 70%
CO6 Apply and demonstrate theoretical concepts of Engineering Chemistry. 70%
COURSE END SURVEY - CY110 - Engineering Chemistry Lab
To what extent you are able to analyse and measure the quality of water and environmental pollution.
CO1
To what extent you are able to analyse and identify unknown compounds from spectral measurements.
CO2
To what extent you are able to prepare different polymers for industrial applications.
CO3
To what extent you are able to find the strength and pH of unknown solutions using different instrumental
methods.
CO4
To what extent you are able to measure the percentage of metal present in metal ore.
CO5
To what extent you are able to apply and demonstrate theoretical concepts of Engineering Chemistry.
CO6
CO->PO MAPPING - CY110 - Engineering Chemistry Lab
CO1 3 2 3 2 3 3 3 2 2 2
CO2 3 2 2 2 2
CO3 3 2 2 2 2 2 3 3
CO4 3 2 3 2 3 2 2
CO5 3 2 3 3 2 2
CO6 3 2 3 3 3 2 1 2
AJCE 81
CHE
CO->PSO MAPPING - CY110 - Engineering Chemistry Lab
CO1
CO2
CO3
CO4
CO5
CO6
COURSE->PO MAPPING - CY110 - Engineering Chemistry Lab
CY110/PO
3 2 3 2 3 3 3 2 2 3 3
COURSE->PSO MAPPING - CY110 - Engineering Chemistry Lab
PSO1 PSO2 PSO3

CY110/PSO
BE100
BE100 Engineering Mechanics 3-1-0:4 2016
No. Course Outcome - BE100 - Engineering Mechanics Target
CO1 Analyse reactions of various supports under equilibrium 55%
CO2 Determine the forces in planar and spatial systems 55%
CO5 Identify basic concepts of dynamic problems 55%
COURSE END SURVEY - BE100 - Engineering Mechanics
To what extend you are able to determine the reactions of various supports under equilibrium condition
CO1
To what extend you are able to determine the forces in planar and spatial systems
CO2
How far you are able to comprehend the properties of planes and solids
AJCE 82
CHE
CO3
How far you are able to determine the friction under static conditions
CO4
How far you are able to identify the basic concepts of dynamic problems
CO5
CO->PO MAPPING - BE100 - Engineering Mechanics
CO1 3 2 1 3 2 2
CO2 3 2 3 2 2
CO3 3 2 2 3 2 3 2
CO4 3 2 3 2 3 2
CO5 3 2 3 2 2
CO->PSO MAPPING - BE100 - Engineering Mechanics
CO1
CO2
CO3
CO4
CO5
COURSE->PO MAPPING - BE100 - Engineering Mechanics
BE100/PO
3 2 2 3 2 3 2
COURSE->PSO MAPPING - BE100 - Engineering Mechanics
PSO1 PSO2 PSO3

BE100/PSO
EE100
EE100 Basics of Electrical Engineering 2-1-0:3 2016
No. Course Outcome - EE100 - Basics of Electrical Engineering Target
AJCE 83
CHE
CO1 Summarize the basics of electrical engineering applied to various engineering problems 60%
CO2 Perform mathematical analysis of electric circuits and their power measurement 55%
CO3 Illustrate the basics of magnetism and apply them to electric machines 55%
CO4 Assess the basic structure of machines and power systems 60%
CO5 Evaluate the basic circuits and machines used in real world 60%
COURSE END SURVEY - EE100 - Basics of Electrical Engineering
To what extend you are able to understand the the basics of electrical engineering
CO1
To what extend you are able to Perform mathematical analysis of electric circuits and its power measurement
CO2
To what extend you are able to illustrate the basics of magnetism and apply it to electric machines
CO3
To what extend you are able to understand the basic structure of machines and power systems
CO4
To what extend you are able to evaluate the basic circuits and machines used in real world
CO5
CO->PO MAPPING - EE100 - Basics of Electrical Engineering
CO1 3 3 2
CO2 3 3 2
CO3 3 3 2
CO4 3 3 2
CO5 3 3 3 2
CO->PSO MAPPING - EE100 - Basics of Electrical Engineering
CO1
CO2
CO3
CO4
AJCE 84
CHE
CO5
COURSE->PO MAPPING - EE100 - Basics of Electrical Engineering
EE100/PO
3 3 3 2
COURSE->PSO MAPPING - EE100 - Basics of Electrical Engineering
PSO1 PSO2 PSO3

EE100/PSO
EC100
EC100 Basics of Electronics Engineering 2-1-0:3 2016
No. Course Outcome - EC100 - Basics of Electronics Engineering Target
CO1 Identify and select necessary components used in various electronic circuits. 60.5%
CO2 Design and organize simple circuits using different types of diodes and transistors 60.5%
CO3 Demonstrate the working of analog circuits such as rectifiers, amplifiers and oscillators. 60.5%
Illustrate the working of basic building blocks of analog and digital systems such as Operational
CO4 60.5%
amplifiers and Logic gates.
CO5 Demonstrate the use of basic measuring instruments used in electronics work. 60.5%
Compare and contrast various modulation techniques, communication systems and TV signal
CO6 60.5%
transmission techniques.
COURSE END SURVEY - EC100 - Basics of Electronics Engineering
To what extent you are able to identify and select necessary components used in various electronic circuits.
CO1
To what extent you are able to design and organize simple circuits using different types of diodes and
transistors
CO2
To what extent you are able to demonstrate the working of analog circuits such as rectifiers, amplifiers and
oscillators.
CO3
To what extent you are able to Illustrate the working of basic building blocks of analog and digital systems
such as Operational amplifiers and Logic gates.
CO4
AJCE 85
CHE
To what extent you are able to demonstrate the use of basic measuring instruments used in electronics
work.
CO5
To what extent you are able to compare and contrast various modulation techniques, communication
systems and TV signal transmission techniques.
CO6
CO->PO MAPPING - EC100 - Basics of Electronics Engineering
CO1 3 2
CO2 3 3 2
CO3 3
CO4 3 3 3
CO5 3 2
CO6 3 2 2
CO->PSO MAPPING - EC100 - Basics of Electronics Engineering
CO1
CO2
CO3
CO4
CO5
CO6
COURSE->PO MAPPING - EC100 - Basics of Electronics Engineering
EC100/PO
3 3 2 2 3
COURSE->PSO MAPPING - EC100 - Basics of Electronics Engineering
PSO1 PSO2 PSO3

EC100/PSO
PH100
AJCE 86
CHE
PH100 Engineering Physics 3-1-0:4 2016
No. Course Outcome - PH100 - Engineering Physics Target
Analyse different phenomena associated with the generation and propagation of oscillations and
CO1 62%
waves
CO2 Demonstrate wave-like phenomena associated with light and use them to measureits properties 62%
Illustrate the phenomenon of superconductivity and evaluate the properties of the superconducting
CO3 62%
state
Identify the features of quantum and statistical phenomena and demonstrate the dynamics of
CO4 57%
microscopic entities.
Describe the production and properties of acoustic and ultrasonic waves and demonstrate their
CO5 62%
applications.
Outline the construction and properties of different lasers and optoelectronic devices, and identify
CO6 62%
their applications
COURSE END SURVEY - PH100 - Engineering Physics
To what extent you are able to analyse different phenomena associated with the generation and propagation
of oscillations and waves
CO1
To what extent you are able to demonstrate wave-like phenomena associated with light and use them to
measure its properties
CO2
To what extent you are able to illustrate the phenomenon of superconductivity and evaluate the properties of
the superconducting state
CO3
To what extent you are able to Identify the features of quantum and statistical phenomena and demonstrate
the dynamics of microscopic entities.
CO4
To what extent you are able to describe the production and properties of acoustic and ultrasonic waves and
demonstrate their applications.
CO5
To what extent you are able to outline the construction and properties of different lasers and optoelectronic
devices, and identify their applications
CO6
CO->PO MAPPING - PH100 - Engineering Physics
AJCE 87
CHE
CO1 3 2 1 2 2 1 1 2 1
CO2 3 2 1 2 2 1 1 1
CO3 3 2 1 2 2 1 1 1 1 1
CO4 3 2 1 2 2 1 2
CO5 3 2 1 2 3 1 1 1 2 1 1
CO6 3 2 1 2 3 1 1 2 1 2
CO->PSO MAPPING - PH100 - Engineering Physics
CO1 3 2
CO2 1 1
CO3 2
CO4 2
CO5 1 1 1
CO6 2 2 1
COURSE->PO MAPPING - PH100 - Engineering Physics
PH100/PO
3 2 1 2 3 1 1 1 2 2 2
COURSE->PSO MAPPING - PH100 - Engineering Physics
PSO1 PSO2 PSO3

PH100/PSO
3 2 1
PH110
PH110 Engineering Physics Lab 0-0-2:1 2016
No. Course Outcome - PH110 - Engineering Physics Lab Target
CO1 Measure basic physical quantities, such as voltage, frequency, temperature etc and evaluate 70%
measurement accuracy.
Measure and analyse the properties of electrical and acoustic waves and oscillations, and
CO2 70%
demonstrate resonance.
Demonstrate wave-like properties of light and measure the wavelength of monochromatic light
CO3 70%
sources
AJCE 88
CHE
CO4 Illustrate the propagation of light through an optical fibre and measure its numerical aperture 70%
CO5 Demonstrate the working of devices such as solar cells and photoelectric cells 70%
Organize an experimental set up and measure fundamental constants such as the Planck’s
CO6 70%
constant.
COURSE END SURVEY - PH110 - Engineering Physics Lab
To what extent you are able to Measure basic physical quantities, such as voltage, frequency, temperature
etc and evaluate measurement accuracy.
CO1
To what extend you are able to measure and analyse the properties of electrical and acoustic waves and
oscillations, and demonstrate resonance.
CO2
To what extend you are able to demonstrate wave-like properties of light and measure the wavelength of
monochromatic light sources
CO3
To what extend you are able to illustrate the propagation of light through an optical fibre and measure its
numerical aperture
CO4
To what extend you are able to demonstrate the working of devices such as solar cells and photoelectric
cells
CO5
To what extend you are able to organize an experimental set up and measure fundamental constants such
as the Planck’s constant.
CO6
CO->PO MAPPING - PH110 - Engineering Physics Lab
CO1 3 2 3 2 2 1 2 2 3 2
CO2 3 3 3 2 2 1 2 1 2 1 2
CO3 3 3 2 2 2
CO4 3 3 1 2 2 1 1 1 1 1 1
CO5 3 2 3 2 2 1 2 1 1 1 1 1
CO6 3 3 1 2 3 1
CO->PSO MAPPING - PH110 - Engineering Physics Lab
AJCE 89
CHE
CO1 3 3 3
CO2 3 3 3
CO3 3 3 3
CO4 3 3 3
CO5 3 3 3
CO6 3 3
COURSE->PO MAPPING - PH110 - Engineering Physics Lab
PH110/PO
3 3 3 2 3 1 2 2 2 3 2 2
COURSE->PSO MAPPING - PH110 - Engineering Physics Lab
PSO1 PSO2 PSO3

PH110/PSO
3 3 3
ME110
ME110 Mechanical Engineering Workshops 0-0-2:1 2016
No. Course Outcome - ME110 - Mechanical Engineering Workshops Target
Demonstrate various manufacturing processes in a basic mechanical engineering workshop, like

CO1 75%
smithy, carpentry, foundry and fitting
Identify various hand tools used in basic mechanical engineering workshop sections, like smithy,
CO2 75%
carpentry, foundry and fitting.
CO3 Choose different measuring devices necessary to carry out work in a workshop. 75%
Demonstrate the operations of various machine tools like lathe, milling, drilling and shaping
CO4 75%
machines.
CO5 Assemble and disassemble machines like IC engines. 75%
Construct models using basic mechanical workshop sections involving welding, moulding, smithy,
CO6 75%
carpentry etc.
COURSE END SURVEY - ME110 - Mechanical Engineering Workshops
Did you get the basic idea about smithy, carpentry, foundry and fitting
CO1
Can you choose the apt tool for a particular operation in the four sections
AJCE 90
CHE
CO2
Are you able to select the proper measuring device required for a job
CO3
Do you have a basic idea about the machine tools like lathe, milling, drilling and shaping machines
CO4
Can you assemble and disassemble a piston and cylinder of an IC Engine

CO5
Can you choose tools and do a model independently

CO6
CO->PO MAPPING - ME110 - Mechanical Engineering Workshops
CO1 2 2 2 2 2 1 1 3 2 1
CO2 2 2 2 2 2 1 1 3 2 1
CO3 2 2 2 2 2 1 1 3 2 1
CO4 2 2 2 2 2 1 1 3 2 1
CO5 3 2 2 2 2 3 2 1
CO6 3 1 2 3 2 1 1 3 2 1
CO->PSO MAPPING - ME110 - Mechanical Engineering Workshops
CO1 2
CO2 2
CO3 2
CO4 2
CO5 3
CO6 3
COURSE->PO MAPPING - ME110 - Mechanical Engineering Workshops
ME110/PO
3 2 2 3 2 1 1 3 2 1
COURSE->PSO MAPPING - ME110 - Mechanical Engineering Workshops
PSO1 PSO2 PSO3
AJCE 91
CHE
ME110/PSO
3
MAT102
Course L-T- Year of

Course Name
Code P:C Introduction
VECTOR CALCULUS, DIFFERENTIAL EQUATIONS AND

MAT102 3-1-0:4 2019
TRANSFORMS
Course Outcome - MAT102 - VECTOR CALCULUS, DIFFERENTIAL EQUATIONS AND

No. Target
TRANSFORMS
CO1 Apply the concept of vector functions and learn to work with conservative vector field 60%
CO2 Evaluate surface and volume integrals and study their relationship and applications 60%
CO3 Solve homogeneous and non-homogeneous linear differential equation with constant coefficients 60%
Use Laplace transform for engineering applications specially for ODEs arising from engineering
CO4 60%
problems
CO5 Utilize Fourier transforms to solve physical problems arising in engineering 60%
COURSE END SURVEY - MAT102 - VECTOR CALCULUS, DIFFERENTIAL EQUATIONS AND TRANSFORMS
To what extend are you able to apply the concept of vector functions and learn to work with conservative
vector field
CO1
To what extend are you able to evaluate surface and volume integrals and study their relationship and
applications
CO2
To what extend are you able to solve homogeneous and non-homogeneous linear differential equation with
constant coefficients
CO3
To what extend are you able to use Laplace transform for engineering applications specially for ODEs arising
from engineering problems
CO4
To what extend are you able to utilize Fourier transforms to solve physical problems arising in engineering
CO5
CO->PO MAPPING - MAT102 - VECTOR CALCULUS, DIFFERENTIAL EQUATIONS AND TRANSFORMS
AJCE 92
CHE
CO1 3 3 1
CO2 3 3 1
CO3 3 3 1
CO4 3 3 1
CO5 3 3 1
CO->PSO MAPPING - MAT102 - VECTOR CALCULUS, DIFFERENTIAL EQUATIONS AND TRANSFORMS
CO1
CO2
CO3
CO4
CO5
COURSE->PO MAPPING - MAT102 - VECTOR CALCULUS, DIFFERENTIAL EQUATIONS AND TRANSFORMS
MAT102/PO
3 3 1
COURSE->PSO MAPPING - MAT102 - VECTOR CALCULUS, DIFFERENTIAL EQUATIONS AND TRANSFORMS
PSO1 PSO2 PSO3

MAT102/PSO
CYT100
CYT100 ENGINEERING CHEMISTRY 3-1-0:4 2019
No. Course Outcome - CYT100 - ENGINEERING CHEMISTRY Target
Apply the basic concepts of electrochemistry and corrosion to explore its possible applications in
CO1 61%
various engineering fields
CO2 Understand various spectroscopic techniques like UV-Visible, IR, NMR and its applications. 68%
Apply the knowledge of analytical method for characterizing a chemical mixture or a compound.
CO3 64%
Understand the basic concept of SEM for surface characterisation of nanomaterials.
Learn about the basics of stereochemistry and its application. Apply the knowledge of conducting
CO4 67%
polymers and advanced polymers in engineering.
CO5 Study various types of water treatment methods to develop skills for treating wastewater 65%
AJCE 93
CHE
COURSE END SURVEY - CYT100 - ENGINEERING CHEMISTRY
To what extent you understand the basic concepts of electrochemistry and corrosion to explore its possible
applications in various engineering fields?
CO1
To what extent the spectroscopic techniques were found useful for various applications?
CO2
How the analytical techniques was found useful for chemical analysis?
CO3
How far you are familiarised to apply the knowledge of polymers for engineering applications?
CO4
Was it helpful for you to apply the knowledge of water treatment methods for societal improvement?
CO5
CO->PO MAPPING - CYT100 - ENGINEERING CHEMISTRY
CO1 1 2 1
CO2 1 1 1 2
CO3 1 1 1 2
CO4 2 1
CO5 1 1 3
CO->PSO MAPPING - CYT100 - ENGINEERING CHEMISTRY
CO1 2 1
CO2
CO3 1
CO4
CO5 2 2
COURSE->PO MAPPING - CYT100 - ENGINEERING CHEMISTRY
CYT100/PO
2 2 1 1 2 3
COURSE->PSO MAPPING - CYT100 - ENGINEERING CHEMISTRY
AJCE 94
CHE
PSO1 PSO2 PSO3

CYT100/PSO
2 2
CYL120
CYL120 ENGINEERING CHEMISTRY LAB 0-0-2:1 2019
No. Course Outcome - CYL120 - ENGINEERING CHEMISTRY LAB Target
Understand and practice different techniques of quantitative chemical analysis to generate

CO1 75%
experimental skills and apply these skills to various analyses
Develop skills relevant to synthesize organic polymers and acquire the practical skill to use TLC for
CO2 78%
the identification of drugs
Develop the ability to understand and explain the use of modern spectroscopic techniques for
CO3 80%
analysing and interpreting the IR spectra and NMR spectra of some organic compounds
CO4 Acquire the ability to understand, explain and use instrumental techniques for chemical analysis 77%
Learn to design and carry out scientific experiments as well as accurately record and analyze the
CO5 74%
results of such experiments
COURSE END SURVEY - CYL120 - ENGINEERING CHEMISTRY LAB
To what extent students will be able to apply knowledge about chemical analysis techniques?
CO1
How far students developed their skills in polymer synthesis?

CO2
To what extent students can apply their knowledge in compound analysis using various spectroscopic
techniques?
CO3
How far the students benefited from understanding the concepts of instrumental techniques?
CO4
How will you evaluate the skills acquired by doing engineering chemistry experiments?
CO5
CO->PO MAPPING - CYL120 - ENGINEERING CHEMISTRY LAB
CO1 3 2 2 2 3 3
AJCE 95
CHE
CO2 3 3 3 3
CO3 3 3 3 3
CO4 3 3 3 3
CO5 3 1 3 3
CO->PSO MAPPING - CYL120 - ENGINEERING CHEMISTRY LAB
CO1
CO2
CO3
CO4
CO5
COURSE->PO MAPPING - CYL120 - ENGINEERING CHEMISTRY LAB
CYL120/PO
3 2 2 3 3 3
COURSE->PSO MAPPING - CYL120 - ENGINEERING CHEMISTRY LAB
PSO1 PSO2 PSO3

CYL120/PSO
EST102
EST102 PROGRAMMING IN C 2-1-2:4 2019
No. Course Outcome - EST102 - PROGRAMMING IN C Target
CO1 Analyse a computational problem and develop an algorithm/ flow chart to find its solution. 56%
Develop C programs with branching and looping statements which uses Arithmetic, Logical,
CO2 56%
Relational or Bitwise operators.
CO3 Develop C programs using arrays,structure and union for storing the data to be processed. 56%
Divide a given computational problem into a number of modules and develop a readable multi-
CO4 56%
function C program by using recursion if required, to find the solution to the computational problem.
CO5 Develop C programs which use pointers for array processing and parameter passing 56%
CO6 Develop C programs with files for reading input and storing output. 56%
COURSE END SURVEY - EST102 - PROGRAMMING IN C
AJCE 96
CHE
Are you able to analyse a computational problem and develop an algorithm/ flow chart to find its solution?
CO1
Are you able to develop C programs with branching and looping statements which uses Arithmetic , Logical ,
Relational or Bitwise operators?
CO2
Are you able to develop C programs with arrays , structure or union for storing the data to be processed?
CO3
Are you able to divide a given computational problem into a number of modules and develop a readable
multi-function C program by using recursion if required, to find the solution to the computational problem?
CO4
Are you able to develop C programs which use pointers for array processing and parameter passing?
CO5
Are you able to develop C programs with files for reading input and storing output?
CO6
CO->PO MAPPING - EST102 - PROGRAMMING IN C
CO1 3 3 3 3 2 3 3
CO2 3 3 3 2 3 2
CO3 3 3 3 2 3 2
CO4 3 3 3 3 3 3 3
CO5 3 3 3 2
CO6 3 3 3 2
CO->PSO MAPPING - EST102 - PROGRAMMING IN C
CO1
CO2
CO3
CO4
CO5
CO6
AJCE 97
CHE
COURSE->PO MAPPING - EST102 - PROGRAMMING IN C
EST102/PO
3 3 3 3 3 2 3 3
COURSE->PSO MAPPING - EST102 - PROGRAMMING IN C
PSO1 PSO2 PSO3

EST102/PSO
EST110
EST110 ENGINEERING GRAPHICS 2-0-2:3 2019
No. Course Outcome - EST110 - ENGINEERING GRAPHICS Target
Demonstrate Engineering Drawing Standards (as per BIS), dimensioning and preparation of
CO1 65%
drawings leading to illustration of Graphics as the communication language of Engineers
Interpret engineering drawings, leading to enhanced presentation skills of 3-D objects in 2-D plane /
CO2 65%
paper and improved visualizion of physical objects.
Apply the principles of orthographic projections of lines, solids and sectioned views in the design of
CO3 65%
pipeline systems.
Prepare isometric and perspective projections that help to reconstruct solutions to real-time
CO4 65%
engineering problems in 3D to provide better understanding.
Create surface development of objects which will help to develop suitable models for industrial
CO5 65%
applications.
Recognize the importance of CAD software, and develop AutoCAD skills to transfer technical data
CO6 65%
and sketches into electronic drawing.
COURSE END SURVEY - EST110 - ENGINEERING GRAPHICS
To what extent you are able to demonstrate Engineering Drawing Standards (as per BIS), dimensioning and
preparation of drawings leading to illustration of Graphics as the communication language of Engineers?
CO1
To what extent you are able to interpret engineering drawings, leading to enhanced presentation skills of 3-
D objects in 2-D plane / paper and improved visualization of physical objects?
CO2
To what extent you are able to apply the principles of orthographic projections of lines, solids and sectioned
views in the design of pipeline systems?
CO3
To what extent you are able to prepare isometric and perspective projections that help to reconstruct
solutions to real-time engineering problems in 3D to provide better understanding?
CO4
AJCE 98
CHE
To what extent you are able to create surface development and generate projections of penetrated objects
which will help to develop suitable models for industrial applications?
CO5
To what extent you are able to recognize the importance of CAD software, and develop AutoCAD skills to
transfer technical data and sketches into electronic drawing?
CO6
CO->PO MAPPING - EST110 - ENGINEERING GRAPHICS
CO1 2 3 2 2 3 3
CO2 2 3 2 2 2 2 2 3 3
CO3 3 2 2 2 2 3
CO4 3 2 2 2 3 2
CO5 3 2 2 1 3 2
CO6 3 2 3 2 3 3 3
CO->PSO MAPPING - EST110 - ENGINEERING GRAPHICS
CO1
CO2
CO3
CO4
CO5
CO6
COURSE->PO MAPPING - EST110 - ENGINEERING GRAPHICS
EST110/PO
3 3 2 3 2 3 3 3 3
COURSE->PSO MAPPING - EST110 - ENGINEERING GRAPHICS
PSO1 PSO2 PSO3

EST110/PSO
EST120
AJCE 99
CHE
EST120 BASICS OF CIVIL & MECHANICAL ENGINEERING 2-0-0:4 2019
No. Course Outcome - EST120 - BASICS OF CIVIL & MECHANICAL ENGINEERING Target
CO1 Discuss the relevance of Civil Engineering, buildings and its codal provisions 65%
CO2 Comprehend the concept of surveying and identify various building materials 65%
CO3 Examine the different components of a building and identify type of construction to be employed 65%
CO4 Compare various cycles involved in different thermodynamic processes 60%
CO5 Analyze different power transmission devices 60%
CO6 Demonstrate working knowledge on manufacturing processes and machining operations 60%
COURSE END SURVEY - EST120 - BASICS OF CIVIL & MECHANICAL ENGINEERING
to what extend you understood the relevance of civil engineering, buildings and its codal provisions?
CO1
how much you will be able to understand the concept of surveying and identify various building materials?
CO2
to what extend you are able to identify type of construction to be employed and different components of a
building?
CO3
how much you are able to compare the cycles involve different thermodynamic process?
CO4
to what extend you are able to analyse power transmission devices?

CO5
to what extend you understand about manufacturing process and machining operations?
CO6
CO->PO MAPPING - EST120 - BASICS OF CIVIL & MECHANICAL ENGINEERING
CO1 1 1 1 2 2 1 1 1
CO2 1 1 1 1 1
CO3 2 1 1 1
CO4 3 1 1
AJCE 100
CHE
CO5 1 1 1 1
CO6 1 1 1
CO->PSO MAPPING - EST120 - BASICS OF CIVIL & MECHANICAL ENGINEERING
CO1 1
CO2 1 1
CO3 1
CO4 1 1
CO5 1
CO6 1
COURSE->PO MAPPING - EST120 - BASICS OF CIVIL & MECHANICAL ENGINEERING
EST120/PO
3 1 1 2 2 1 1 1 1 1
COURSE->PSO MAPPING - EST120 - BASICS OF CIVIL & MECHANICAL ENGINEERING
PSO1 PSO2 PSO3

EST120/PSO
1 1 1
ESL120
ESL120 CIVIL & MECHANICAL WORKSHOP 0-0-2:1 2019
No. Course Outcome - ESL120 - CIVIL & MECHANICAL WORKSHOP Target
Apply the modern measuring techniques for linear, area, volume calculations and carry out setting
CO1 65%
out operations
CO2 Compute the level difference between points 65%
Co-ordinate the work related to masonry , plumbing, sanitary fittings and design of rain water
CO3 65%
harvesting systems
Demonstrate various manufacturing processes in basic mechanical engineering workshops like

CO4 65%
smithy, carpentry, foundry and fitting
Demonstrate the operations of various machine tools llike lathe, milling, drilling and shaping
CO5 65%
machines
CO6 Assemble and disassemble machines like IC Engines 65%
COURSE END SURVEY - ESL120 - CIVIL & MECHANICAL WORKSHOP
AJCE 101
CHE
To what extent you are able to applly modern measuring techniques foro linear, area and volume
calculations and carry out setting out operations
CO1
To what extent you are able to compute the level difference between points for a civil work
CO2
To what extent you are able to coordinate the work related to masonry, plumbing, sanitary fittings and design
of rain water harvesting system for a residential building construction
CO3
To what extent you are to select smithy, carpentry, foundry and fitting for a particular engineering job
CO4
To what extent you are able to choose the various machine tools like lathe, milling, drilling and shaping
machines for your machining requirement
CO5
To what extent you are oable to assemble and disassemble simple machine components
CO6
CO->PO MAPPING - ESL120 - CIVIL & MECHANICAL WORKSHOP
CO1 2 2 3 3 2 2 2
CO2 2 2 3 3 2 2 2
CO3 2 2 3 3 2 2 2
CO4 2 2 3 3 2 2 2
CO5 2 2 3 3 2 2 2
CO6 2 2 3 3 2 2 2
CO->PSO MAPPING - ESL120 - CIVIL & MECHANICAL WORKSHOP
CO1
CO2
CO3
CO4
CO5
CO6
AJCE 102
CHE
COURSE->PO MAPPING - ESL120 - CIVIL & MECHANICAL WORKSHOP
ESL120/PO
2 2 3 3 2 2 2
COURSE->PSO MAPPING - ESL120 - CIVIL & MECHANICAL WORKSHOP
PSO1 PSO2 PSO3

ESL120/PSO
HUN102
HUN102 PROFESSIONAL COMMUNICATION 2-0-2:4 2019
No. Course Outcome - HUN102 - PROFESSIONAL COMMUNICATION Target
CO1 Use vocabulary and language skills relevant to engineering as a profession. 65%
CO2 Analyze, interpret and effectively summarize a variety of textual content. 65%
CO3 Create effective technical presentations 65%
Discuss a given technical/ non-technical topic in a group setting and arrive at

CO4 65%
generalizations/consensus.
CO5 Identify drawbacks in listening patterns and apply listening techniques for specific needs. 65%
Assess and create professional and technical documents that are clear and adhering to all the
CO6 65%
necessary conventions.
COURSE END SURVEY - HUN102 - PROFESSIONAL COMMUNICATION
To what extend can you develop and use vocabulary and language skills relevant to engineering profession?
CO1
To what extend can you analyze, interpret and summarize a variety of textual content effectively?
CO2
To what extend can you create effective technical presentations?

CO3
To what extend can you discuss about a given technical/ non- technical topic in a group setting and arrive at
a consensus??
CO4
To what extend can you identify drawbacks in listening patterns and apply listening techniques for specific
needs?
CO5
AJCE 103
CHE
To what extend can you assess and create professional and technical documents that are clear and
adhering to all the necessary conventions?
CO6
CO->PO MAPPING - HUN102 - PROFESSIONAL COMMUNICATION
CO1 1 2 1 1 3 3
CO2 2 3 3
CO3 3 3
CO4 3 2
CO5 2 3 3
CO6 2 2 2 3
CO->PSO MAPPING - HUN102 - PROFESSIONAL COMMUNICATION
CO1
CO2
CO3
CO4
CO5
CO6
COURSE->PO MAPPING - HUN102 - PROFESSIONAL COMMUNICATION
HUN102/PO
1 2 2 2 3 3 3
COURSE->PSO MAPPING - HUN102 - PROFESSIONAL COMMUNICATION
PSO1 PSO2 PSO3

HUN102/PSO
SEMESTER-3
MA201
MA201 Linear Algebra & Complex Analysis 3-1-0:4 2016
AJCE 104
CHE
No. Course Outcome - MA201 - Linear Algebra & Complex Analysis Target
CO1 Identify and study analytic functions and harmonic functions 60%
CO2 Recognize conformal mapping and find regions that are mapped under certain transformations 60%
CO3 Evaluate contour integrals using the theory of complex variables 60%
CO4 Evaluate real definite integrals as an application of residue theorem 60%
CO5 Solve systems of equations 60%
CO6 Compute eigen values and diagonalise a matrix 60%
COURSE END SURVEY - MA201 - Linear Algebra & Complex Analysis
TTo what extent are you able to identify and study analytic functions and harmonic functions ?
CO1
To what extent are you able to recoganisze conformal mapping and find regions that are mapped under
certain transformations ?
CO2
To what extent are you able to evaluate contour integrals using the theory of complex variables ?
CO3
To what extent are you able to evaluate real definite integrals as application of residue theorem ?
CO4
To what extent are you able to solve systems of equations ?

CO5
To what extent are you able to compute eigen values and diagonalise a matrix
CO6
CO->PO MAPPING - MA201 - Linear Algebra & Complex Analysis
CO1 3 3 2 2 2 1 1
CO2 3 3 2 2 2 1 1
CO3 3 3 3 2 2 1 1
CO4 3 3 3 3 2 2 2
CO5 3 3 3 3 2 2 2
CO6 3 3 2 2 2 1 1
AJCE 105
CHE
CO->PSO MAPPING - MA201 - Linear Algebra & Complex Analysis
CO1 2 2
CO2 2 2
CO3 2 3
CO4 3 3
CO5 3 3
CO6 2 2
COURSE->PO MAPPING - MA201 - Linear Algebra & Complex Analysis
MA201/PO
3 3 3 3 2 2 2
COURSE->PSO MAPPING - MA201 - Linear Algebra & Complex Analysis
PSO1 PSO2 PSO3

MA201/PSO
3 3
CH201
CH201 Chemical Process Calculations 3-1-0:4 2016
No. Course Outcome - CH201 - Chemical Process Calculations Target
CO1 Convert physical quantities and empirical equations from one unit system to another. 60%
CO2 Report the composition of solid, liquid and gaseous mixtures in adequate unit systems 60%
CO3 Calculate physical properties of gases and liquids using equations of state and other basic laws. 60%
CO4 Compute properties of air- water vapour mixture from basic definitions and from Humidity chart. 60%
CO5 Develop and solve material balance equations for unit operations and processes. 60%
CO6 Develop and solve energy balance equations for unit operations and processes. 62%
COURSE END SURVEY - CH201 - Chemical Process Calculations
To what extent you are able convert physical quantities and empirical equations from one unit system to
another
CO1
To what extent you are able to report the composition of solid, liquid and gaseous mixtures in adequate units
AJCE 106
CHE
CO2
To what extent you are able to calculate physical properties of gases and liquids using equations of state
and other basic laws.
CO3
To what extent you are able to compute properties of air- water vapour mixture from basic definitions and
from Humidity chart
CO4
To what extent you are able to develop and solve material balance equations for unit operations and
processes
CO5
To what extent you are able to develop and solve energy balance equations for unit operations and
processes
CO6
CO->PO MAPPING - CH201 - Chemical Process Calculations
CO1 3 3 1 2 2 1 1 1
CO2 3 3 1 2 2 1 1 1 1
CO3 3 3 1 2 2 1 1 1 1
CO4 1 2 1 3 3 1 1 1 1
CO5 1 3 1 3 3 2 2 1 1
CO6 1 3 2 3 3 2 2 1 1
CO->PSO MAPPING - CH201 - Chemical Process Calculations
CO1 3 3
CO2 3 3
CO3 3 3
CO4 3 3
CO5 3 3
CO6 3 3
COURSE->PO MAPPING - CH201 - Chemical Process Calculations
CH201/PO
3 3 2 3 3 2 2 1 1
AJCE 107
CHE
COURSE->PSO MAPPING - CH201 - Chemical Process Calculations
PSO1 PSO2 PSO3

CH201/PSO
3 3
CH203
CH203 Particle Technology 3-1-0:4 2016
No. Course Outcome - CH203 - Particle Technology Target
Evaluate the particle size distribution, mean particle diameter, specific surface area and number of
CO1 particles per unit mass using techniques such as sieve analysis, pipette analysis and beaker 66%
decantation
CO2 Identify the principles of free settling,hindered settling and mineral beneficiation techniques 66%
CO3 Apply the concepts of filtration theory and select appropriate filtration equipment 66%
CO4 Describe separation techniques for particulates in air 66%
Select suitable size reduction equipment and estimate the energy requirements for a specified
CO5 66%
reduction in size for a given material.
CO6 Demonstrate mixing and conveying processes in chemical industries 66%
COURSE END SURVEY - CH203 - Particle Technology
To what extent have you understood the concepts of characteristics of particles ?

CO1
How far did you understand the principles of particle settling ?

CO2
To what extend have you understood the concepts of filtration theory and filtration equipment ?
CO3
Haw far have you understood the air separation techniques ?

CO4
To what extent have you understood the size reduction operations?

CO5
How far have you understood the mixing and conveying process in chemical industries ?
CO6
AJCE 108
CHE
CO->PO MAPPING - CH203 - Particle Technology
CO1 3 3 1 1
CO2 3 3 1 1
CO3 3 3 1 3 2 1 1
CO4 1 1 1 1 2
CO5 3 3 3 3 2 1 1
CO6 1 1 1 1 2 1
CO->PSO MAPPING - CH203 - Particle Technology
CO1 2 3
CO2 2 3
CO3 2 3
CO4 2 1
CO5 2 3
CO6 2 1
COURSE->PO MAPPING - CH203 - Particle Technology
CH203/PO
3 3 3 3 2 1 1
COURSE->PSO MAPPING - CH203 - Particle Technology
PSO1 PSO2 PSO3

CH203/PSO
2 3
CH207
CH207 Chemistry for Process Engineering –I 2-1-0:3 2016
No. Course Outcome - CH207 - Chemistry for Process Engineering –I Target
Demonstrate the relevance of organic chemistry for chemical engineering practice

CO1 62%
CO2 Illustrate role of reactions in chemical engineering 66%
CO3 Identify and explain advanced synthetic reagents and mechanisms 64%
AJCE 109
CHE
CO4 Demonstrate the importance of selected industrially used organic compounds 62%
CO5 Explain various aspects of chemistry of food and drugs and their composition 62%
COURSE END SURVEY - CH207 - Chemistry for Process Engineering –I
To what extent you understand the relevance of organic chemistry in chemical engineering practice
CO1
How far you are able to illustrate the role of reactions in chemical engineering
CO2
To what extent you are able to Identify and explain advanced synthetic reagents and mechanisms
CO3
How much you are able to demonstrate the importance of selected industrially used organic compounds
CO4
How far you are able to explain various aspects of chemistry of food and drugs and their composition
CO5
CO->PO MAPPING - CH207 - Chemistry for Process Engineering –I
CO1 3 3 1 2 2
CO2 3 3 2 1 2
CO3 3 3 2 1 2
CO4 2 2 1 1 2
CO5 2 2 1 1 2
CO->PSO MAPPING - CH207 - Chemistry for Process Engineering –I
CO1 3 2
CO2 3 2
CO3 3 2
CO4 3 1
CO5 3 1
COURSE->PO MAPPING - CH207 - Chemistry for Process Engineering –I
AJCE 110
CHE
CH207/PO
3 3 2 2 2
COURSE->PSO MAPPING - CH207 - Chemistry for Process Engineering –I
PSO1 PSO2 PSO3

CH207/PSO
3 2
CH231
CH231 Chemistry Lab for Process Engineering 0-0-3:1 2016
No. Course Outcome - CH231 - Chemistry Lab for Process Engineering Target
CO1 Analyze and identify unknown organic compounds 68%
CO2 Prepare different organic compounds 68%
CO3 Analyze and estimate different organic compounds volumetrically 68%
CO4 Identify organic compounds using colorimetric methods 68%
CO5 Identify organic and biomaterials using chromatographic methods. 68%
COURSE END SURVEY - CH231 - Chemistry Lab for Process Engineering
To what extent you are able to analyze and identify unknown organic compounds
CO1
To what extent you are able to prepare different organic compounds

CO2
To what extent you are able to analyze and estimate different organic compounds volumetrically
CO3
To what extent you are able to identify organic compounds using colorimetric methods
CO4
To what extent you are able to identify organic and biomaterials using chromatographic methods
CO5
CO->PO MAPPING - CH231 - Chemistry Lab for Process Engineering
CO1 3 2 1 2 2 1
AJCE 111
CHE
CO2 3 2 1 2 2 1
CO3 3 2 1 2 2 1
CO4 3 2 1 2 2 1
CO5 3 2 1 2 2 1
CO->PSO MAPPING - CH231 - Chemistry Lab for Process Engineering
CO1 2 2 1
CO2 2 2 1
CO3 2 2 1
CO4 2 2 1
CO5 2 2 1
COURSE->PO MAPPING - CH231 - Chemistry Lab for Process Engineering
CH231/PO
3 2 1 2 2 1
COURSE->PSO MAPPING - CH231 - Chemistry Lab for Process Engineering
PSO1 PSO2 PSO3

CH231/PSO
2 2 1
CH205
CH205 Fluid and Particle Mechanics - I 3-1-0:4 2016
No. Course Outcome - CH205 - Fluid and Particle Mechanics - I Target
CO1 Identify various properties of fluids and different types of flow systems. 61%
CO2 Describe the principles of fluid statics,buoyancy and pressure measurements. 61%
Analyse the mathematical models for flow behaviour in different systems utilizing the principles of
CO3 kinematics. 61%
Formulate mathematical models for application of mass, energy, and momentum conversation
CO4 61%
principles in fluid flow.
CO5 Develop the basic fluid dynamic equations for incompressible fluids 61%
CO6 Assess suitability of different types of valves and measuring/metering devices for fluids 63%
AJCE 112
CHE
COURSE END SURVEY - CH205 - Fluid and Particle Mechanics - I
Are you able to identify different properties of fluids and flow behaviours?
CO1
Will you be able to explain the principles of fluid statics?

CO2
To what extent can you analyse mathematical models of flow using the methods of fluid kinematics?
CO3
Will you be able to assess application of mass, energy, and momentum conservation equations in fluid flow
systems?
CO4
Answer Choice- Very frequently/Frequently/Rarely Very rarely/Never
To what extend can you develop equations of flow for incompressible fluids?
CO5
How confident are you in assessing suitability of different types of valves and measuring devices used in
fluid handling?
CO6
CO->PO MAPPING - CH205 - Fluid and Particle Mechanics - I
CO1 2 2 1 2 1
CO2 2 1 1 2 1
CO3 3 3 3 2 3
CO4 3 3 3 2 3
CO5 3 3 2 2 3
CO6 3 1
CO->PSO MAPPING - CH205 - Fluid and Particle Mechanics - I
CO1 3 1
CO2 3 1
CO3 3 3
CO4 3 3
CO5 3 3
CO6 3
AJCE 113
CHE
COURSE->PO MAPPING - CH205 - Fluid and Particle Mechanics - I
CH205/PO
3 3 3 2 3 1
COURSE->PSO MAPPING - CH205 - Fluid and Particle Mechanics - I
PSO1 PSO2 PSO3

CH205/PSO
3 3
CH233
CH233 Chemical Technology and Environmental Engg Lab 0-0-3:1 2016
No. Course Outcome - CH233 - Chemical Technology and Environmental Engg Lab Target
CO1 Determine various properties of oils such as acid value, iodine value and saponification value. 66%
CO2 Make soap and determine its important properties 66%
CO3 Find out the sucrose content of sugar and available chlorine content of bleaching powder 66%
CO4 Perform common environmental experiments to find the quality of water and wastewater samples 66%
CO5 Identify the appropriate instrument facilities for water quality analysis 66%
COURSE END SURVEY - CH233 - Chemical Technology and Environmental Engg Lab
To what extend you can determine the various properties of oils such as acid value, iodine value and
saponification value.
CO1
To what extend you are able to make soap and determine its important properties
CO2
To what extend you are able to find out the sucrose content of sugar and available chlorine content of
bleaching powder
CO3
To what extend you can perform common environmental experiments to find the quality of water and
wastewater samples.
CO4
To what extend you are able to identify the appropriate instrument facilities for water quality analysis
CO5
AJCE 114
CHE
CO->PO MAPPING - CH233 - Chemical Technology and Environmental Engg Lab
CO1 1 1 2 2 1 2 2 1 1
CO2 1 1 2 2 1 2 2 1 1
CO3 1 1 2 2 1 2 2 1 1
CO4 1 1 2 2 1 2 2 1 1
CO5 1 1 2 2 1 2 2 1 1
CO->PSO MAPPING - CH233 - Chemical Technology and Environmental Engg Lab
CO1 2 3 1
CO2 2 2 1
CO3 2 3 1
CO4 2 2 1
CO5 2 2 1
COURSE->PO MAPPING - CH233 - Chemical Technology and Environmental Engg Lab
CH233/PO
1 1 2 2 1 2 2 1 1
COURSE->PSO MAPPING - CH233 - Chemical Technology and Environmental Engg Lab
PSO1 PSO2 PSO3

CH233/PSO
2 3 1
HS210
HS210 Life Skills/Business Economics 2-0-2:3 2016
No. Course Outcome - HS210 - Life Skills/Business Economics Target
comprehend the techniques of language skills in Group Discussion,Presentations ,Letter writing and
CO1 60%
Reports .
CO2 Applies critical and creative thinking to solve problems 60%
CO3 Demonstrates ability to work in groups and teams 60%
CO4 demonstrates the qualities of a professional and is aware of work ethics 60%
CO5 applies the qualities of a leadership in all activites 60%
AJCE 115
CHE
CO6 applies communication and leadership techniques in all formal environments 60%
COURSE END SURVEY - HS210 - Life Skills/Business Economics
To what extend can you communicate effectively in formal presentations and in teams
CO1
To what extend can you use creativity and critical thinking in solving problems
CO2
To what extend can you effectively work in teams and groups

CO3
To what extend are you aware of work and professional ethics

CO4
To what extend do you exhibit the qualities of a leader

CO5
To what extend can you apply communication and leadership qualities in formal environments
CO6
CO->PO MAPPING - HS210 - Life Skills/Business Economics
CO1 2 1 2 1 3 3 3 3 2
CO2 2 1 2 1 3 3 3 3 2
CO3 2 1 2 1 3 3 3 3 2
CO4 2 1 2 1 3 3 3 3 2
CO5 2 1 2 1 3 3 3 3 2
CO6 2 1 2 1 3 3 3 3 2
CO->PSO MAPPING - HS210 - Life Skills/Business Economics
CO1 1 3
CO2 1 3
CO3 1 3
CO4 1 3
CO5 1 3
AJCE 116
CHE
CO6 1 3
COURSE->PO MAPPING - HS210 - Life Skills/Business Economics
HS210/PO
2 1 2 1 3 3 3 3 2
COURSE->PSO MAPPING - HS210 - Life Skills/Business Economics
PSO1 PSO2 PSO3

HS210/PSO
1 3
MAT201
Course
Course Name L-T-P:C Year of Introduction
Code
MAT201 PARTIAL DIFFERENTIAL EQUATION AND COMPLEX ANALYSIS 3-1-0:4 2019
No. Course Outcome - MAT201 - PARTIAL DIFFERENTIAL EQUATION AND COMPLEX ANALYSIS Target
CO1 Solve partial differential equations 60%
CO2 Analyse solutions of one dimensional wave and heat equations 60%
Understand the important concepts of a complex valued functions like continuity, differentiability and
CO3 60%
conformal mappings.
CO4 Evaluate complex integrals using Cauchy’s integral theorem and Cauchy’s integral formula 60%
Formulate the series expansion of complex function about a singularity and apply residue theorem to
CO5 60%
compute several kinds of real integrals.
COURSE END SURVEY - MAT201 - PARTIAL DIFFERENTIAL EQUATION AND COMPLEX ANALYSIS
To what extent are you able to solve partial differential equations?

CO1
To what extent are you able to analyse solutions of one dimensional wave and heat equations
CO2
To what extent are you able to understand the important concepts of a complex valued functions like
continuity, differentiability and conformal mappings.
CO3
To what extent are you able to evaluate complex integrals using Cauchy’s integral theorem and Cauchy’s
integral formula
CO4
AJCE 117
CHE
To what extent are you able to formulate the series expansion of complex function about a singularity and
apply residue theorem to compute several kinds of real integrals.
CO5
CO->PO MAPPING - MAT201 - PARTIAL DIFFERENTIAL EQUATION AND COMPLEX ANALYSIS
CO1 3 3 2
CO2 3 3 2
CO3 3 3 2
CO4 3 3 2
CO5 3 3 2
CO->PSO MAPPING - MAT201 - PARTIAL DIFFERENTIAL EQUATION AND COMPLEX ANALYSIS
CO1 2
CO2 2
CO3 2
CO4 2
CO5 2
COURSE->PO MAPPING - MAT201 - PARTIAL DIFFERENTIAL EQUATION AND COMPLEX ANALYSIS
MAT201/PO
3 3 2
COURSE->PSO MAPPING - MAT201 - PARTIAL DIFFERENTIAL EQUATION AND COMPLEX ANALYSIS
PSO1 PSO2 PSO3

MAT201/PSO
2
CHT201
CHT201 CHEMISTRY FOR PROCESS ENGINEERING 3-1-0:4 2019
No. Course Outcome - CHT201 - CHEMISTRY FOR PROCESS ENGINEERING Target
CO1 Describe the principles of analytical chemistry and their applications in chemical industry. 60.5%
Apply the principles of spectroscopy and microscopy to identify and characterize molecules,
CO2 60.5%
compounds and surface structures
AJCE 118
CHE
Illustrate distribution law and apply the knowledge in solvent extraction and describe the kinetics of
CO3 60.5%
different chemical processes.
Analyze the basics of adsorption, surface analysis techniques and colloidal nature of particles to
CO4 60.5%
evaluate the desirable properties of adsorbents for chemical synthesis and industrial production.
Evaluate the applications of nuclear and photochemistry techniques in medical diagnosis and
CO5 60.5%
industries
COURSE END SURVEY - CHT201 - CHEMISTRY FOR PROCESS ENGINEERING
To what extent you are able to describe the principles of analytical chemistry and their applications in
chemical industry.
CO1
To what extent you are able to apply the principles of spectroscopy and microscopy to identify and
characterize molecules, compounds and surface structures
CO2
To what extent you are able to illustrate distribution law and apply the knowledge in solvent extraction and
describe the kinetics of different chemical processes.
CO3
To what extent you are able to analyze the basics of adsorption, surface analysis techniques and colloidal
nature of particles to evaluate the desirable properties of adsorbents for chemical synthesis and industrial
CO4 production.
To what extent you are able to evaluate the applications of nuclear and photochemistry techniques in
medical diagnosis and industries
CO5
CO->PO MAPPING - CHT201 - CHEMISTRY FOR PROCESS ENGINEERING
CO1 3 3 2 3 2 2
CO2 2 2 2 2 2
CO3 2 2
CO4 2 2 2 2
CO5 3 2 3 2
CO->PSO MAPPING - CHT201 - CHEMISTRY FOR PROCESS ENGINEERING
CO1 3 3 2
CO2 2 2
AJCE 119
CHE
CO3 2
CO4 2 2
CO5 2 2
COURSE->PO MAPPING - CHT201 - CHEMISTRY FOR PROCESS ENGINEERING
CHT201/PO
3 3 3 3 2 2 2
COURSE->PSO MAPPING - CHT201 - CHEMISTRY FOR PROCESS ENGINEERING
PSO1 PSO2 PSO3

CHT201/PSO
3 3 2
CHT203
CHT203 CHEMICAL PROCESS PRINCIPLES 3-1-0:4 2019
No. Course Outcome - CHT203 - CHEMICAL PROCESS PRINCIPLES Target
CO1 Convert physical quantities and empirical equations from one unit system to another 61%
CO2 Identify the composition of solid, liquid and gaseous mixtures in adequate unit systems 61%
CO3 Illustrate the properties of air- water vapor mixture from basic definitions and from Humidity chart 61%
CO4 Develop and assess material balance equations for various mass transfer operations 61%
CO5 Develop and assess material balance equations for various processes involving chemical reactions 61%
CO6 Develop and assess energy balance equations for unit operations and processes. 61%
COURSE END SURVEY - CHT203 - CHEMICAL PROCESS PRINCIPLES
To what extend are you able to convert physical quantities and empirical equations from one unit system to
another
CO1
To what extend are you able to identify the composition of solid, liquid and gaseous mixtures in adequate
unit systems
CO2
To what extend are you able to Illustrate the properties of air- water vapour mixture from basic definitions
and from Humidity chart
CO3
AJCE 120
CHE
To what extend are you able to develop and assess material balance equations for various mass transfer
operations
CO4
To what extend are you able to develop and assess material balance equations for various processes
involving chemical reactions
CO5
To what extend are you able to develop and assess energy balance equations for unit operations and
processes.
CO6
CO->PO MAPPING - CHT203 - CHEMICAL PROCESS PRINCIPLES
CO1 3 3 1 2 2 1 1 1
CO2 3 3 1 2 2 1 1 1 1
CO3 3 3 1 2 2 1 1 1 1
CO4 1 2 1 3 3 1 1 1 1
CO5 1 3 1 3 3 2 2 1 1
CO6 1 3 2 3 3 2 2 1 1
CO->PSO MAPPING - CHT203 - CHEMICAL PROCESS PRINCIPLES
CO1
CO2
CO3
CO4
CO5
CO6
COURSE->PO MAPPING - CHT203 - CHEMICAL PROCESS PRINCIPLES
CHT203/PO
3 3 2 3 3 2 2 1 1
COURSE->PSO MAPPING - CHT203 - CHEMICAL PROCESS PRINCIPLES
PSO1 PSO2 PSO3

CHT203/PSO
EST200
AJCE 121
CHE
EST200 Design & Engineering 2-0-0:2 2019
COURSE END SURVEY - EST200 - Design & Engineering

CO->PO MAPPING - EST200 - Design & Engineering
CO->PSO MAPPING - EST200 - Design & Engineering
COURSE->PO MAPPING - EST200 - Design & Engineering
EST200/PO
COURSE->PSO MAPPING - EST200 - Design & Engineering
PSO1 PSO2 PSO3

EST200/PSO
EST200
EST200 Design & Engineering 2-0-0:2 2019
No. Course Outcome - EST200 - Design & Engineering Target
CO1 Understand the steps involved in the design process. 67%
CO2 Apply design thinking while learning and practicing engineering. 67%
CO3 Understand the various design communication mechanisms. 67%
CO4 Understand fundamental design engineering concepts. 67%
CO5 Apply expediency, economics and sustainability in Design Engineering. 67%
COURSE END SURVEY - EST200 - Design & Engineering
To what extend you are able to understand the various steps involved in the design? process
CO1
I am able to apply design thinking while practicing engineering.

CO2
To what extend you are able to understand the various design communication mechanisms?
CO3 Answer Choice- Excellent/Very Good/Good Satisfactory/Needs improvement
AJCE 122
CHE
I understood fundamental design engineering concepts.

CO4
To what extend you are able to apply expediency, economics and sustainability in Design Engineering?
CO5
CO->PO MAPPING - EST200 - Design & Engineering
CO1
CO2
CO3
CO4
CO5
CO->PSO MAPPING - EST200 - Design & Engineering
CO1
CO2
CO3
CO4
CO5
COURSE->PO MAPPING - EST200 - Design & Engineering
EST200/PO
COURSE->PSO MAPPING - EST200 - Design & Engineering
PSO1 PSO2 PSO3

EST200/PSO
MCN201
MCN201 Sustainable Engineering 2-0-0:0 2019
COURSE END SURVEY - MCN201 - Sustainable Engineering

CO->PO MAPPING - MCN201 - Sustainable Engineering
CO->PSO MAPPING - MCN201 - Sustainable Engineering
AJCE 123
CHE
COURSE->PO MAPPING - MCN201 - Sustainable Engineering
MCN201/PO
COURSE->PSO MAPPING - MCN201 - Sustainable Engineering
PSO1 PSO2 PSO3

MCN201/PSO
MCN201
MCN201 Sustainable Engineering 2-0-0:0 2019
No. Course Outcome - MCN201 - Sustainable Engineering Target
CO1 Perceive the relevance and concept of sustainability and associated global initiatives 61%
CO2 Expound on the different types of environmental pollution problems and their sustainable solutions 61%
CO3 Be abreast of environmental regulations and standards 61%
CO4 Outline concepts of conventional and non-conventional energy 61%
CO5 Demonstrate sustainable practices using engineering knowledge 61%
COURSE END SURVEY - MCN201 - Sustainable Engineering
The Sustainable Development Goals form a road map for the future..
CO1
Is global warming linked to climate change ?

CO2
EIA is a necessary criteria during the course of greenfild projects.

CO3
Is renewable energy penetrating the global energy market ?

CO4
Are sustainable habitats a part of urban life ?

CO5
CO->PO MAPPING - MCN201 - Sustainable Engineering
AJCE 124
CHE
CO1
CO2
CO3
CO4
CO5
CO->PSO MAPPING - MCN201 - Sustainable Engineering
CO1
CO2
CO3
CO4
CO5
COURSE->PO MAPPING - MCN201 - Sustainable Engineering
MCN201/PO
COURSE->PSO MAPPING - MCN201 - Sustainable Engineering
PSO1 PSO2 PSO3

MCN201/PSO
CHL201
Course L-T- Year of

Course Name
CHEMICAL TECHNOLOGY & ENVIRONMENTAL ENGINEERING

CHL201 0-0-3:2 2019
LAB
Course Outcome - CHL201 - CHEMICAL TECHNOLOGY & ENVIRONMENTAL ENGINEERING

No. Target
LAB
CO1 Analyse and estimate parameters for the selected chemicals 70%
Develop skills to use analytical and instrumental methods for measurement of parameters relevant
CO2 to chemical engineering. 70%
CO3 Develop Experiments and analytical skills to determine environmental qualitative parameters 70%
Demonstrate capacity to work in team and exhibit knowledge of safety, health and environment by
CO4 70%
practicing laboratory ethics
AJCE 125
CHE
Develop skills of accuracy in experimentation, interpret the experimental result and suggest its area
CO5 70%
of application
COURSE END SURVEY - CHL201 - CHEMICAL TECHNOLOGY & ENVIRONMENTAL ENGINEERING LAB
To what extent you were able to analyse and estimate the parameters for selected chemicals
CO1
Are you able to use analytical and instrument method for measurement of parameters relevant to chemical
engineering
CO2
Are you able to develop Experiments and analytical skills to determine environmental qualitative parameters
CO3
To what extent you are able toDemonstrate capacity to work in team and exhibit knowledge of safety, health
and environment by practicing laboratory ethics
CO4
Are you able to interpret the experimental result and suggest its area of application
CO5
CO->PO MAPPING - CHL201 - CHEMICAL TECHNOLOGY & ENVIRONMENTAL ENGINEERING LAB
CO1 1 2 3 1 2
CO2 1 3 1 2
CO3 1 2 3 1 2
CO4 3 2 3 3 3 1
CO5 3 2 3 1 1 3 3 3 2
CO->PSO MAPPING - CHL201 - CHEMICAL TECHNOLOGY & ENVIRONMENTAL ENGINEERING LAB
CO1 2 1
CO2 2 1
CO3 2 1
CO4 1 3
CO5 3 1
COURSE->PO MAPPING - CHL201 - CHEMICAL TECHNOLOGY & ENVIRONMENTAL ENGINEERING LAB
CHL201/PO
AJCE 126
CHE
3 1 2 2 3 3 2 3 3 3 2
COURSE->PSO MAPPING - CHL201 - CHEMICAL TECHNOLOGY & ENVIRONMENTAL ENGINEERING LAB
PSO1 PSO2 PSO3

CHL201/PSO
3 1 3
CHL203
CHL203 Chemistry Lab for Process Engineering 0-0-3:2 2019
No. Course Outcome - CHL203 - Chemistry Lab for Process Engineering Target
Explain the thermodynamics of solutes in a solvent and apply this knowledge in higher semester
CO1 55%
practical sessions
CO2 Describe the mutual solubilities of liquids and apply this idea in solvent extraction 55%
Construct a phase diagram off bi and tri component systems and predict the composition of mixtures
CO3 55%
at various temperature
CO4 Investigate the adsorption isotherms and apply this knowledge in various industrial process 55%
Quantify the analyte using electrochemical and analytical techniques such as conductometry and
CO5 55%
potentiometry
COURSE END SURVEY - CHL203 - Chemistry Lab for Process Engineering
To what extend you were able to study the concepts of thermodynamics in solutes in solvent from the
experiments
CO1
will you be able to analyze the mutual solubility of liquids and apply it in unit operations
CO2
Will you be able to construct the phase diagrams of various mixtures at different tempertaures
CO3
How effectively can you plot the adsorption isotherms and apply its knowledge in various industires
CO4
To what extend can you Quantify the analyte using electrochemical and analytical techniques such as
conductometry and potentiometry
CO5
CO->PO MAPPING - CHL203 - Chemistry Lab for Process Engineering
AJCE 127
CHE
CO1 2 2 2 1 1 1 1 2
CO2 2 2 1 1 1 1 1 2
CO3 3 1 1 1 1 1 1 2
CO4 3 1 2 2 1 1 1 1 2
CO5 2 1 1 2 1 1 1 2
CO->PSO MAPPING - CHL203 - Chemistry Lab for Process Engineering
CO1 2 1 1
CO2 2 1 1
CO3 3 1 1
CO4 3 1 1
CO5 2 1 1
COURSE->PO MAPPING - CHL203 - Chemistry Lab for Process Engineering
CHL203/PO
3 2 2 2 1 1 1 1 2
COURSE->PSO MAPPING - CHL203 - Chemistry Lab for Process Engineering
PSO1 PSO2 PSO3

CHL203/PSO
3 1 1
VAC
VAC Remedial/Minor/Honours course 3-1-0:4 2019
COURSE END SURVEY - VAC - Remedial/Minor/Honours course

CO->PO MAPPING - VAC - Remedial/Minor/Honours course
CO->PSO MAPPING - VAC - Remedial/Minor/Honours course
COURSE->PO MAPPING - VAC - Remedial/Minor/Honours course
VAC/PO
AJCE 128
CHE
COURSE->PSO MAPPING - VAC - Remedial/Minor/Honours course
PSO1 PSO2 PSO3

VAC/PSO
CHT205
CHT205 FLUID AND PARTICLE MECHANICS 3-1-0:4 2019
No. Course Outcome - CHT205 - FLUID AND PARTICLE MECHANICS Target
CO1 Apply the basic properties and transport laws to fluid in different conditions like statics and dynamics 66%
CO2 Apply the fluid flow principles in the application of the mass, momentum and energy equations 61%
CO3 Design a piping network using the concept of fluid dynamics 62%
Design a fluidized bed and a packed bed using the concept of fluid dynamics considering its
CO4 63%
application.
Select valves, pumps and flow measuring devices in process industries with the knowledge of the
CO5 66%
basic principles.
COURSE END SURVEY - CHT205 - FLUID AND PARTICLE MECHANICS
Where you able to apply the basic properties and transport laws to fluid in different conditions like statics and
dynamics?
CO1
Where you able to apply the fluid flow principles in the application of the mass, momentum and energy
equations?
CO2
Where you able to design a piping network using the concept of fluid dynamics?
CO3
Where you able to design a fluidized bed and a packed bed using the concept of fluid dynamics considering
its application?
CO4
Where you able to select valves, pumps and flow measuring devices in process industries with the
knowledge of the basic principles?
CO5
CO->PO MAPPING - CHT205 - FLUID AND PARTICLE MECHANICS
AJCE 129
CHE
CO1 3 1 1 1 2 1 2
CO2 3 3 3 3 3 2 1 2
CO3 3 3 3 2 1 1 2
CO4 3 3 3 2 2 1 2
CO5 3 2 2 2 2 2
CO->PSO MAPPING - CHT205 - FLUID AND PARTICLE MECHANICS
CO1
CO2
CO3
CO4
CO5
COURSE->PO MAPPING - CHT205 - FLUID AND PARTICLE MECHANICS
CHT205/PO
3 3 3 3 3 2 2 2 2
COURSE->PSO MAPPING - CHT205 - FLUID AND PARTICLE MECHANICS
PSO1 PSO2 PSO3

CHT205/PSO
CHT281
CHT281 Introduction to Chemical Engineering 3-1-0:4 2019
No. Course Outcome - CHT281 - Introduction to Chemical Engineering Target
CO1 Understand the role of chemical engineer in product and process development 61%
CO2 Understand dimensions, systems of units and carryout related conversions 61%
CO3 To differentiate between different unit operations and understand unit processes. 61%
CO4 To gain basic knowledge on selected topics in fluid flow and heat transfer 61%
To gain basic knowledge on selected topics in Chemical reaction Engineering, Process Control and
CO5 61%
instrumentation
CO6 To gain understanding basic concepts Environmental safety in Chemical Process Industries 61%
AJCE 130
CHE
COURSE END SURVEY - CHT281 - Introduction to Chemical Engineering
How far was you able to understand the relevance of chemical engineering?
CO1
How far was you able to identify the concept of concentration of solutions and conversions?
CO2
Were you able to identify and enlist different chemical processes and equipments?
CO3
How far the basics of heat transfer and reaction engineering were understood?
CO4
How far were you able to evaluate instrumentation requirements and control strategies related to chemical
engineering
CO5
How far you can evaluate and asses the environmental aspects of Chemical Engineering.
CO6
CO->PO MAPPING - CHT281 - Introduction to Chemical Engineering
CO1 2 1 1
CO2 3 1 1
CO3 1 1 2 1
CO4 3 3 3 1 1 1
CO5 3 3 3 1 1 1
CO6 3 3 2 2 2 2 2
CO->PSO MAPPING - CHT281 - Introduction to Chemical Engineering
CO1 1
CO2 3 2
CO3 2 1
CO4 3 3
CO5 3 3
CO6 2 3
AJCE 131
CHE
COURSE->PO MAPPING - CHT281 - Introduction to Chemical Engineering
CHT281/PO
3 3 3 1 1 3 3 2 2 2 2 2
COURSE->PSO MAPPING - CHT281 - Introduction to Chemical Engineering
PSO1 PSO2 PSO3

CHT281/PSO
3 3 3
SEMESTER-4
MA202
MA202 Probability Distributions, Transforms and Numerical Methods 3-1-0:4 2016
No. Course Outcome - MA202 - Probability Distributions, Transforms and Numerical Methods Target
Apply the concept of random variables, probability distributions, specific discrete distributions in
CO1 62%
various Engineering problems.
CO2 Utilize specific continuous distributions in various Engineering problems. 65%
CO3 Use Laplace transforms for engineering applications. 65%
CO4 Implement Fourier transforms for engineering applications. 65%
Solve various engineering problems using numerical methods for solution of equations and
CO5 65%
interpolation.
CO6 Employ numerical methods for integration, differentiation and solution of differential equations 65%
COURSE END SURVEY - MA202 - Probability Distributions, Transforms and Numerical Methods
To what extent are you able to apply the concept of random variables, probability distributions, specific
discrete distributions in various Engineering problems ?
CO1
To what extent are you able to utilize specific continuous distributions in various Engineering problems?
CO2
To what extent are you able to use Laplace transforms for engineering applications?
CO3
To what extent are you able to implement Fourier transforms for engineering applications.?
CO4 Answer Choice- Excellent/Very Good/Good/Fair/Poor
AJCE 132
CHE
To what extent are you able to solve various engineering problems using numerical methods for solution of
equations and interpolation?
CO5
To what extent are you able to employ numerical methods for integration, differentiation and solution of
differential equations?
CO6
CO->PO MAPPING - MA202 - Probability Distributions, Transforms and Numerical Methods
CO1 3 3 1 1
CO2 3 3 2 1 1
CO3 3 3 1 1 1
CO4 3 3 1 1 1
CO5 3 3 1 1 1
CO6 3 3 1 2 1
CO->PSO MAPPING - MA202 - Probability Distributions, Transforms and Numerical Methods
CO1 3 1
CO2 3 1
CO3 3 1
CO4 3 1
CO5 3 1
CO6 3 1
COURSE->PO MAPPING - MA202 - Probability Distributions, Transforms and Numerical Methods
MA202/PO
3 3 2 2 1
COURSE->PSO MAPPING - MA202 - Probability Distributions, Transforms and Numerical Methods
PSO1 PSO2 PSO3

MA202/PSO
3 1
CH202
AJCE 133
CHE
CH202 Process Heat Transfer 3-1-0:4 2016
No. Course Outcome - CH202 - Process Heat Transfer Target
Identify and distinguish various modes of heat transfer, examine the mechanisms involved and the
CO1 63%
associated governing laws.
Choose appropriate governing equations and analyze the different modes of heat transfer in
CO2 63%
different geometries and systems under steady and transient processes.
CO3 Compare the different heat transfer processes based on the concept of analogy. 63%
CO4 Perform basic calculations to determine relevant design parameters for common heat exchangers. 63%
Interpret the concepts involved in heat transfer in extended surfaces and carry outbasic design of
CO5 63%
single and multiple effect evaporators.
CO6 Analyze the heat transfer associated with boiling and condensation. 63%
COURSE END SURVEY - CH202 - Process Heat Transfer
How far you have been able to Identify and distinguish various modes of heat transfer and mechanisms
involved and the associated governing laws
CO1
How far you have been able to Choose appropriate governing equations for different modes of heat transfer
in different geometries and systems under steady and transient processes.
CO2
How far you have been able to compare the different heat transfer processes based on the concept of
analogy.
CO3
How far you have been able to perform basic calculations to determine relevant design parameters for
common heat exchangers.
CO4
How far you have been able to interpret the concepts involved in heat transfer in extended surfaces and
carry out basic design of single and multiple effect evaporators.
CO5
How far you have been able to analyze the heat transfer associated with boiling and condensation.
CO6
CO->PO MAPPING - CH202 - Process Heat Transfer
CO1 3 3 1 1 1
CO2 3 3 1 1 1
AJCE 134
CHE
CO3 2 2 1 2 1 1
CO4 3 3 3 1 2 1 1 1
CO5 2 2 1 2 1 1
CO6 2 2 1 2 1
CO->PSO MAPPING - CH202 - Process Heat Transfer
CO1 2 1
CO2 2 1
CO3 2 2
CO4 2 2
CO5 1 1
CO6 1 1
COURSE->PO MAPPING - CH202 - Process Heat Transfer
CH202/PO
3 3 3 2 2 1 1 1 1
COURSE->PSO MAPPING - CH202 - Process Heat Transfer
PSO1 PSO2 PSO3

CH202/PSO
2 2
CH204
CH204 Chemical Engineering Thermodynamics 3-1-0:4 2016
No. Course Outcome - CH204 - Chemical Engineering Thermodynamics Target
CO1 Apply the laws of thermodynamics to analyze Chemical Engineering problems 62%
CO2 Compute the properties of ideal/real gases and mixtures/solutions 62%
CO3 Analyze various processes involving mass, energy and entropy balances 62%
CO4 Evaluate the composition of vapor-liquid equilibria for ideal and non-ideal systems 62%
CO5 Determine equilibrium constant and mole fraction of reaction mixtures under a given condition 62%
CO6 Analyze the effect of various factors on reaction equillibria 62%
COURSE END SURVEY - CH204 - Chemical Engineering Thermodynamics
AJCE 135
CHE
To what extent can you apply the laws of thermodynamics to analyze Chemical Engineering problems
CO1
To what extent can you compute the properties of ideal/real gases and mixtures/solutions
CO2
To what extent can you analyze various processes involving mass, energy and entropy balances
CO3
To what extent can you evaluate the composition of vapor-liquid equilibria for ideal and non-ideal systems
CO4
To what extent can you determine equilibrium constant and mole fraction of reaction mixtures under a given
condition
CO5
To what extent can you analyze the effect of various factors on reaction equillibria
CO6
CO->PO MAPPING - CH204 - Chemical Engineering Thermodynamics
CO1 3 3 2 2 2 1
CO2 3 3 2 2 1 1
CO3 3 3 2 2 3 1
CO4 2 2 2 2 1
CO5 2 2 2 1 1 1
CO6 2 2 1 1 1
CO->PSO MAPPING - CH204 - Chemical Engineering Thermodynamics
CO1 3 2
CO2 2 2
CO3 3 3
CO4 1 1
CO5 2 1
CO6 1 1
COURSE->PO MAPPING - CH204 - Chemical Engineering Thermodynamics
AJCE 136
CHE
CH204/PO
3 3 2 2 3 1
COURSE->PSO MAPPING - CH204 - Chemical Engineering Thermodynamics
PSO1 PSO2 PSO3

CH204/PSO
3 3
CH206
CH206 Fluid and Particle Mechanics II 3-0-0:3 2016
No. Course Outcome - CH206 - Fluid and Particle Mechanics II Target
CO1 Illustrate the concept of drag force and fluid flow around a solid body 61%
CO2 Devise processes with large fluid-solid contact area utilizing fluidization phenomenon 61%
CO3 Compare different types of pumps, mixers and agitators used in industry 61%
Interpret processes involving compressible flow with the help of Mach number and associated
CO4 61%
relations
CO5 Generalize flow behavior of non-Newtonian fluids 61%
COURSE END SURVEY - CH206 - Fluid and Particle Mechanics II
What is the level of your understanding about the principle of drag in fluid flow.
CO1
Are you able to understand the concept of fluidization and its applications.
CO2
What is your ability to identify a fluid transporting device for a specific application along with its capacity.
CO3
What is the level of your knowledge in compressible fluid flow.

CO4
What is the level of your knowledge on NonNewtonian fluids.

CO5
CO->PO MAPPING - CH206 - Fluid and Particle Mechanics II
AJCE 137
CHE
CO1 2 2 2 1 2
CO2 2 2 1 1 1
CO3 1 1 2 1
CO4 2 2 1 1
CO5 1 1 1
CO->PSO MAPPING - CH206 - Fluid and Particle Mechanics II
CO1 2 1
CO2 2 1
CO3 1
CO4 1 1
CO5 1
COURSE->PO MAPPING - CH206 - Fluid and Particle Mechanics II
CH206/PO
2 2 2 1 2
COURSE->PSO MAPPING - CH206 - Fluid and Particle Mechanics II
PSO1 PSO2 PSO3

CH206/PSO
2 1
CH208
CH208 Chemistry for Process Engineering II 3-0-0:3 2016
No. Course Outcome - CH208 - Chemistry for Process Engineering II Target
CO1 Describe the principles of analytical chemistry and their applications in chemical industry. 60%
Apply the principles of spectroscopy and microscopy to identify and characterize molecules,
CO2 60%
compounds and surface structures
Interpret phase equilibria and electrochemical equilibria for different chemical engineering
CO3 60%
applications.
Demonstrate the principles of electrochemistry and their applications in sensors and electrochemical
CO4 60%
devices
Analyze the basics of adsorption, surface analysis techniques and colloidal nature of particles to
CO5 60%
evaluate the desirable properties of adsorbents for chemical synthesis and industrial production.
AJCE 138
CHE
Evaluate the applications of nuclear and radiochemistry techniques in medical diagnosis and
CO6 60%
industries
COURSE END SURVEY - CH208 - Chemistry for Process Engineering II
To what extent you are able to describe the principles of analytical chemistry and their applications in
chemical industry.
CO1
To what extent you are able to apply the principles of spectroscopy and microscopy to identify and
characterize molecules, compounds and surface structures
CO2
To what extent you are able to Interpret phase equilibria and electrochemical equilibria for different chemical
engineering applications.
CO3
To what extent you are able to demonstrate the principles of electrochemistry and their applications in
sensors and electrochemical devices
CO4
To what extent you are able to analyze the basics of adsorption, surface analysis techniques and colloidal
nature of particles to evaluate the desirable properties of adsorbents for chemical synthesis and industrial
CO5 production.
To what extent you are able to evaluate the applications of nuclear and radiochemistry techniques in medical
diagnosis and industries
CO6
CO->PO MAPPING - CH208 - Chemistry for Process Engineering II
CO1 2 2 2 2 1
CO2 2 1 1 2 1
CO3 1 1 1 2
CO4 2 2 1 1
CO5 2 2 1 1
CO6 1 1
CO->PSO MAPPING - CH208 - Chemistry for Process Engineering II
CO1 2 1
AJCE 139
CHE
CO2 2 1
CO3 2 1
CO4 2 1
CO5 2 1
CO6 1 1
COURSE->PO MAPPING - CH208 - Chemistry for Process Engineering II
CH208/PO
2 2 1 2 2 1
COURSE->PSO MAPPING - CH208 - Chemistry for Process Engineering II
PSO1 PSO2 PSO3

CH208/PSO
2 1
CH232
CH232 Fluid and Particle Mechanics Lab 0-0-3:1 2016
No. Course Outcome - CH232 - Fluid and Particle Mechanics Lab Target
CO1 Determine the discharge coefficients of flow meters. 68%
CO2 Analyze the characteristic curves of centrifugal pumps 68%
CO3 Determine the pressure drop through packed bed and fluidized bed 68%
CO4 Determine the point velocity of a fluid using Pitot tube 68%
CO5 Analyze Bernoulli’s theorem and flow behavior of fluids 68%
COURSE END SURVEY - CH232 - Fluid and Particle Mechanics Lab
What is your level of ability to determine the discharge coefficients of flow meters
CO1
Rate your ability to analyze the characteristic curves of centrifugal pumps

CO2
What is your level of knowledge in determining the pressure drop through packed and fluidized bed.
AJCE 140
CHE
What is your level of ability in point velocity determination using Pitot tube
CO4
Rate your ability to analyze Bernoulli's theorem and flow behavior of fluids
CO5
CO->PO MAPPING - CH232 - Fluid and Particle Mechanics Lab
CO1 3 1 1 1 2 2 1 1
CO2 2 2 1 2 2 1 1
CO3 3 2 3 1 2 2 1 1
CO4 2 1 1 2 1 1 1 2 1 1
CO5 3 3 2 1 2 2 1 1
CO->PSO MAPPING - CH232 - Fluid and Particle Mechanics Lab
CO1 2 1
CO2 2 2 1
CO3 3 2 1
CO4 2 1 1
CO5 3 2 1
COURSE->PO MAPPING - CH232 - Fluid and Particle Mechanics Lab
CH232/PO
3 3 3 1 2 1 1 1 2 1 1
COURSE->PSO MAPPING - CH232 - Fluid and Particle Mechanics Lab
PSO1 PSO2 PSO3

CH232/PSO
3 2 1
CH234
CH234 Particle Technology Lab 0-0-3:1 2016
No. Course Outcome - CH234 - Particle Technology Lab Target
AJCE 141
CHE
Determine the particle size distribution, mean particle diameter, specific surface area and number of
decantation
Plan and perform experiments using size reduction equipment and estimate the energy
CO2 65%
requirements for a specified reduction in size of a given material
CO3 Find out the area of a thickener by conducting batch sedimentation experiment 65%
Plan and perform experiments using equipment used in industrial operations such as rotary drum
CO4 65%
filter and leaf filter
CO5 Learn the mechanism of solid separation from gas-solid mixture 65%
COURSE END SURVEY - CH234 - Particle Technology Lab
To what extend you are able to perform size analysis using expiriments such as sieve analysis, pipette
analysis and beaker decantation
CO1
To what extend you can able to perform experiments on size reduction

CO2
To what extend yotu are able to perform a batch sedimentation experimnet.

CO3
To what extend you can Plan and perform experiments using equipment used in industrial operations such
as rotary drum filter and leaf filter
CO4
How far can you able to understand operation of a cyclon seperator

CO5
CO->PO MAPPING - CH234 - Particle Technology Lab
CO1 3 2 2 1 2 2 1 1
CO2 2 2 2 2 2 1 1
CO3 2 2 2 2 2 1 1
CO4 2 2 2 2 2 1 1
CO5 3 2 2 1 2 2 1 1
CO->PSO MAPPING - CH234 - Particle Technology Lab
CO1 3 1 1
AJCE 142
CHE
CO2 2 1 1
CO3 2 1 1
CO4 2 1 1
CO5 3 2 1
COURSE->PO MAPPING - CH234 - Particle Technology Lab
CH234/PO
3 2 2 1 2 2 1 1
COURSE->PSO MAPPING - CH234 - Particle Technology Lab
PSO1 PSO2 PSO3

CH234/PSO
3 2 1
HS200
HS200 Life Skills/Business Economics 3-0-0:3 2016
No. Course Outcome - HS200 - Life Skills/Business Economics Target
Identify concepts in economics and interpret their role in managerial economics which will be useful
CO1 66%
in their profession and business.
Analyze and interpret demand and supply of goods and services in the economy and its influence
CO2 62%
and execute production analysis.
CO3 Recognize the effect of trade cycle in business and analyze various market situations. 61%
CO4 Measure National Income and evaluate measures taken by RBI in controlling inflation. 61%
CO5 Analyze, compare and justify investment decisions based on capital budgeting methods. 61%
Prepare and analyze balance sheets, interpret taxation system in India, compare different sources
CO6 61%
of capital for firms and carry out demand forecast.
COURSE END SURVEY - HS200 - Life Skills/Business Economics
To what extent you are able to identify concepts in Economics & interpret their role in Managerial Economics
CO1
To what extent you are able to analyse & interpret determinants of demand & supply & the factors which
leads to changes in demand & supply of goods & services in the economy.
CO2
AJCE 143
CHE
To what extent you are able to recognise the effect of trade cycle in business
CO3
To what extent you are able to evaluate the effect of the measures taken by RBI in controlling inflation
CO4
To what extent you are able to compare & justify investment decisions based on capital budgeting methods
CO5
To what extent you are able to prepare balance sheet,interpret GST& compare the different sources of
finance for firms
CO6
CO->PO MAPPING - HS200 - Life Skills/Business Economics
CO1 1 1 1 2 1 1 3 2
CO2 1 1 1 2 1 1 3 2
CO3 1 1 1 2 1 1 3 2
CO4 1 1 1 2 1 1 3 2
CO5 1 1 1 2 1 1 3 2
CO6 1 1 1 2 1 1 3 2
CO->PSO MAPPING - HS200 - Life Skills/Business Economics
CO1 1 3
CO2 1 3
CO3 1 3
CO4 1 3
CO5 1 3
CO6 1 3
COURSE->PO MAPPING - HS200 - Life Skills/Business Economics
HS200/PO
1 1 1 2 1 1 3 2
COURSE->PSO MAPPING - HS200 - Life Skills/Business Economics
PSO1 PSO2 PSO3

HS200/PSO
1 3
AJCE 144
CHE
CHT202
CHT202 Chemical Engineering Thermodynamics 3-1-0:4 2019
No. Course Outcome - CHT202 - Chemical Engineering Thermodynamics Target
CO1 Apply the laws of thermodynamics to analyse various processes 66%
CO2 Define thermodynamic properties and processes of a system 66%
CO3 Relate various thermodynamic properties to easily measurable properties 66%
CO4 Calculate the change in properties when given substances are mixed under specified conditions 66%
Construct phase diagrams and Explain VLE of completely miscible, partially miscible and immiscible
CO5 66%
liquids
Evaluate equilibrium constant, composition and degrees of freedom for reactions taking place in a
CO6 66%
given mixture of components at given conditions of temperature and pressure
COURSE END SURVEY - CHT202 - Chemical Engineering Thermodynamics
To what extend are you able to apply the laws of thermodynamics to analyse various processes
CO1
To what extent can you define thermodynamic properties and processes of a system
CO2
To what extent can you relate thermodynamic properties to easily measurable properties
CO3
To what extend can you Calculate the change in properties when given substances are mixed under
specified conditions
CO4
to what extend are you able to Construct phase diagrams and Explain VLE of completely miscible, partially
miscible and immiscible liquids
CO5
to what extent can you Evaluate equilibrium constant, composition and degrees of freedom for reactions
taking place in a given mixture of components at given conditions of temperature and pressure
CO6
CO->PO MAPPING - CHT202 - Chemical Engineering Thermodynamics
AJCE 145
CHE
CO1 1 3 1 2 1 1
CO2 3 1 1 1
CO3 1 1 1 1
CO4 1 1 1 1
CO5 1 2 1
CO6 2 3 1 2
CO->PSO MAPPING - CHT202 - Chemical Engineering Thermodynamics
CO1
CO2
CO3
CO4
CO5
CO6
COURSE->PO MAPPING - CHT202 - Chemical Engineering Thermodynamics
CHT202/PO
3 3 1 2 1 1
COURSE->PSO MAPPING - CHT202 - Chemical Engineering Thermodynamics
PSO1 PSO2 PSO3

CHT202/PSO
CHT204
CHT204 HEAT TRANSFER OPERATIONS 3-1-0:4 2019
No. Course Outcome - CHT204 - HEAT TRANSFER OPERATIONS Target
CO1 Identify and distinguish various modes of heat transfer and examine the mechanisms 65%
Apply appropriate governing equations and analyse conduction heat transfer problems for different
CO2 60%
geometries under steady state and transient processes
CO3 Solve forced and natural convection heat transfer problems using empirical equations. 60%
CO4 Explain the concepts behind radiation heat transfer and solve radiation heat transfer problems 60%
AJCE 146
CHE
CO5 Analyse the heat transfer processes involved in boiling and condensation 60%
CO6 Design of heat exchangers and evaporators after interpreting the basic concepts 60%
COURSE END SURVEY - CHT204 - HEAT TRANSFER OPERATIONS
Where you able to identify and distinguish various modes of heat transfer?
CO1
Where you able to apply the different governing equations and analyse conduction heat transfer for different
geometries under steady and unsteady processes??
CO2
Where you able to solve convection heat transfer problems?

CO3
Where you able to understand concepts of radiation and solve related problems?
CO4
Where you able to understand boiling and condensation heat transfer processes?
CO5
Whether apply the basic concepts of heat transfer to design heat exchangers and evaporators?
CO6
CO->PO MAPPING - CHT204 - HEAT TRANSFER OPERATIONS
CO1 3
CO2 3 3 2
CO3 3 3 2
CO4 3 3 2
CO5 3 3
CO6 3 3 3 2
CO->PSO MAPPING - CHT204 - HEAT TRANSFER OPERATIONS
CO1
CO2
CO3
CO4
AJCE 147
CHE
CO5
CO6
COURSE->PO MAPPING - CHT204 - HEAT TRANSFER OPERATIONS
CHT204/PO
3 3 3 2 2
COURSE->PSO MAPPING - CHT204 - HEAT TRANSFER OPERATIONS
PSO1 PSO2 PSO3

CHT204/PSO
CHT206
CHT206 Particle Technology 3-1-0:4 2019
No. Course Outcome - CHT206 - Particle Technology Target
Evaluate the particle size distribution, mean particle diameter, specific surface area and number of
decantation
CO2 Identify the principles of free settling, hindered settling and mineral beneficiation techniques 68%
CO3 Apply the concepts of filtration theory and select appropriate filtration equipment 68%
CO4 Describe separation techniques for particulates in ai 68%
Select suitable size reduction equipment and estimate the energy requirements for a specified
CO5 68%
reduction in size for a given material.
CO6 Demonstrate mixing and conveying processes in chemical industries 68%
COURSE END SURVEY - CHT206 - Particle Technology
Where you able to Evaluate the particle size distribution, mean particle diameter, specific surface area and
number of particles per unit mass using techniques such as sieve analysis, pipette analysis and beaker
CO1 decantation
Where you able to Identify the principles of free settling, hindered settling and mineral beneficiation
techniques
CO2
where you able to Apply the concepts of filtration theory and select appropriate filtration equipment
CO3 Answer Choice- Excellent/Very Good/Good/Satisfactory/Poor
AJCE 148
CHE
Where you able to Describe separation techniques for particulates in air

CO4
Where you able to Select suitable size reduction equipment and estimate the energy requirements for a
specified reduction in size for a given material.
CO5
where you able to Demonstrate mixing and conveying processes in chemical industries
CO6
CO->PO MAPPING - CHT206 - Particle Technology
CO1 3
CO2 3
CO3 3
CO4 3
CO5 3
CO6 3
CO->PSO MAPPING - CHT206 - Particle Technology
CO1 3
CO2 3
CO3 3
CO4 3
CO5 3
CO6 3
COURSE->PO MAPPING - CHT206 - Particle Technology
CHT206/PO
3 3
COURSE->PSO MAPPING - CHT206 - Particle Technology
PSO1 PSO2 PSO3

CHT206/PSO
3 3
HUT200
AJCE 149
CHE
HUT200 PROFESSIONAL ETHICS 2-0-0:2 2019
No. Course Outcome - HUT200 - PROFESSIONAL ETHICS Target
Understand and recall the core values that shape the ethical behavior of a professional (Knowledge
CO1 0%
and Comprehension).
CO2 Adopt a good character and follow an ethical life.(Synthesize) 0%
Explain and point out the role and responsibility in technological development by keeping personal
CO3 0%
ethics and legal ethic(ANALYSING)
Solve moral and ethical problems through exploration and assessment by established
CO4 0%
experiments(APPLYING)
Apply and appraise the knowledge of human values and social values to contemporary ethical
CO5 0%
values and global issues.(EVALUATING)
COURSE END SURVEY - HUT200 - PROFESSIONAL ETHICS
I am able to understand and recall core values required in professional life.

CO1
I am able to adopt a good character and follow an ethical life.

CO2
I am able to understand the roles and responsibilities of a professional.

CO3
I am able to analyze and solve moral and ethical problems.

CO4
I am able to judge a case or global issue.

CO5
CO->PO MAPPING - HUT200 - PROFESSIONAL ETHICS
CO1 1 2
CO2 1 2
CO3 1 1
CO4 1
CO5 2
CO->PSO MAPPING - HUT200 - PROFESSIONAL ETHICS
AJCE 150
CHE
CO1 1
CO2 2
CO3 1
CO4 1
CO5 1
COURSE->PO MAPPING - HUT200 - PROFESSIONAL ETHICS
HUT200/PO
1 1 2 1 2
COURSE->PSO MAPPING - HUT200 - PROFESSIONAL ETHICS
PSO1 PSO2 PSO3

HUT200/PSO
2
CHL202
CHL202 Fluid and Particle Mechanics Lab 0-0-3:2 2019
No. Course Outcome - CHL202 - Fluid and Particle Mechanics Lab Target
CO1 Plan and perform experiments in flow measuring equipments and analyse the principles involved 65%
CO2 Plan and perform experiments in fluid moving machinery and analyse the principles involved 65%
CO3 Plan and perform experiments in solid-fluid systems and analyse the principles involved. 65%
Demonstrate capacity to work in teams and exhibit knowledge of safety, health and environment by
CO4 65%
practicing laboratory ethics.
COURSE END SURVEY - CHL202 - Fluid and Particle Mechanics Lab
Were you able to perform experiments in flow measuring equipments and analyse the principles involved
CO1
Were you able to perform experiments in fluid moving machinery and analyse the principles involved
CO2
Were you able to perform experiments in solid-fluid systems and analyse the principles involved.
CO3
AJCE 151
CHE
Were you able to demonstrate capacity to work in teams and exhibit knowledge of safety, health and
environment by practicing laboratory ethics.
CO4
CO->PO MAPPING - CHL202 - Fluid and Particle Mechanics Lab
CO1
CO2
CO3
CO4
CO->PSO MAPPING - CHL202 - Fluid and Particle Mechanics Lab
CO1
CO2
CO3
CO4
COURSE->PO MAPPING - CHL202 - Fluid and Particle Mechanics Lab
CHL202/PO
COURSE->PSO MAPPING - CHL202 - Fluid and Particle Mechanics Lab
PSO1 PSO2 PSO3

CHL202/PSO
CHL204
CHL204 Particle Technology Lab 0-0-3:2 2019
No. Course Outcome - CHL204 - Particle Technology Lab Target
Use the basic principles of Particle technology to find solutions of problems by conducting
CO1 66%
experiments in the laboratory.
Design experiments and analyze/interpret data collected from experimental investigation in the
CO2 66%
laboratory
CO3 Use modern computing tools necessary for analysis of the experimental data in the laboratory. 66%
Exhibit ethical principles in engineering profession by practicing ethical approaches in experimental

CO4 66%
investigation, collection and reporting of data and adhering to the safety ethics set by the laboratory
AJCE 152
CHE
CO5 Practice work in diverse groups and perform laboratory experiments 66%
CO6 Prepare cogent reports of the experimental works conducted in laboratory 66%
COURSE END SURVEY - CHL204 - Particle Technology Lab
Did you understand and differentiate the basic principles of particle technology?
CO1
How far were you able to design experiments and analyze/interpret data collected from experimental
investigation ?
CO2
How far were you able analyse the experimental data?

CO3
How far were you able to incorporate ethical approaches in experimental investigation?
CO4
Were you able work in groups effectively?

CO5
How far were you able to prepare cogent reports?

CO6
CO->PO MAPPING - CHL204 - Particle Technology Lab
CO1 3
CO2 3 3
CO3 3
CO4 3 3
CO5 2 3
CO6 2 3
CO->PSO MAPPING - CHL204 - Particle Technology Lab
CO1
CO2
CO3
CO4
AJCE 153
CHE
CO5
CO6
COURSE->PO MAPPING - CHL204 - Particle Technology Lab
CHL204/PO
3 3 3 3 3 3 3 3
COURSE->PSO MAPPING - CHL204 - Particle Technology Lab
PSO1 PSO2 PSO3

CHL204/PSO
MAT202
MAT202 Probability, Statistics and Numerical Methods 3-1-0:4 2019
No. Course Outcome - MAT202 - Probability, Statistics and Numerical Methods Target
Understand the concept, properties and important models of discrete random variables and, using
CO1 55%
them analyse suitable random phenomena
Understand the concept, properties and important models of continuous random variables and,
CO2 55%
using them, analyse suitable random phenomena.
Perform statistical inferences concerning characteristics of a population based on attributes of

CO3 samples drawn from the population 57%
Compute roots of equations, evaluate definite integrals and perform interpolation on given numerical
CO4 60%
data using standard numerical techniques
Apply standard numerical techniques for solving systems of equations, fitting curves on given
CO5 60%
numerical data and solving ordinary differential equations.
COURSE END SURVEY - MAT202 - Probability, Statistics and Numerical Methods
How far this course has helped you to understand the concept, properties and important models of discrete
random variables and, using them analyse suitable random phenomena
CO1
How far this course has helped you to understand the concept, properties and important models of
continuous random variables and, using them, analyse suitable random phenomena.
CO2
How far this course has helped you to perform statistical inferences concerning characteristics of a
population based on attributes of samples drawn from the population
CO3
AJCE 154
CHE
How far this course has helped you to compute roots of equations, evaluate definite integrals and perform
interpolation on given numerical data using standard numerical techniques
CO4
How far this course has helped you to apply standard numerical techniques for solving systems of equations,
fitting curves on given numerical data and solving ordinary differential equations.
CO5
CO->PO MAPPING - MAT202 - Probability, Statistics and Numerical Methods
CO1 3 3 1
CO2 3 3 1
CO3 3 3 3 1
CO4 3 3 1
CO5 3 3 1
CO->PSO MAPPING - MAT202 - Probability, Statistics and Numerical Methods
CO1 2
CO2 2
CO3 2
CO4 2
CO5 2
COURSE->PO MAPPING - MAT202 - Probability, Statistics and Numerical Methods
MAT202/PO
3 3 3 1
COURSE->PSO MAPPING - MAT202 - Probability, Statistics and Numerical Methods
PSO1 PSO2 PSO3

MAT202/PSO
2
MCN202
MCN202 CONSTITUTION OF INDIA 2-0-0:0 2019
No. Course Outcome - MCN202 - CONSTITUTION OF INDIA Target
AJCE 155
CHE
CO1 Awareness of Constitution of India 60%
CO2 Knowing duties and rights of Citizens 60%
CO3 Understanding the working of union executive, parliament.. 60%
CO4 Understanding the working of judiciary, legislature, state executive 60%
CO5 Utilize special provision and statutory institutions 60%
CO6 Patriotism and being responsible citizens. 60%
COURSE END SURVEY - MCN202 - CONSTITUTION OF INDIA
Did you have the awareness of constitution of India

CO1
Are you able to know about the duties and rights of Citizens
CO2
Did you able to understand the working of union executive, parliament..

CO3
Do you understand the working of judiciary, legislature, state executive

CO4
Are you aware about the special provision and statutory institutions
CO5
Did you get clear idea about the responsiblities of a citizens and importance patriotism
CO6
CO->PO MAPPING - MCN202 - CONSTITUTION OF INDIA
CO1
CO2
CO3
CO4
CO5
CO6
CO->PSO MAPPING - MCN202 - CONSTITUTION OF INDIA
AJCE 156
CHE
CO1
CO2
CO3
CO4
CO5
CO6
COURSE->PO MAPPING - MCN202 - CONSTITUTION OF INDIA
MCN202/PO
COURSE->PSO MAPPING - MCN202 - CONSTITUTION OF INDIA
PSO1 PSO2 PSO3

MCN202/PSO
SEMESTER-5
CH305
CH305 Chemical Reaction Engineering I 3-0-0:3 2016
No. Course Outcome - CH305 - Chemical Reaction Engineering I Target
CO1 Analyze the principles of chemical kinetics and thermodynamics of different chemical reactions. 66.5%
CO2 Analyze the mechanism of chemical reactions. 66.5%
CO3 Determine the chemical kinetic parameters using various experimental methods. 66.5%
CO4 Design of ideal reactors for single and complex reactions. 66.5%
CO5 Develop skills to choose the right reactor for multiple reactions. 66.5%
CO6 Determine rate laws for enzymatic reactions and design bioreactors. 66.5%
COURSE END SURVEY - CH305 - Chemical Reaction Engineering I
What is your level of knowledge in analysing the kinetics of the chemical reactions.
CO1
What is your level of knowledge in analyzing the mechanism of chemical reactions.
AJCE 157
CHE
What is your level of knowledge in the determination of chemical kinetic parameters using experimental
methods.
CO3
To what extent you are able to do the design of ideal reactors for single and complex reactions.
CO4
To what extent you are able to choose the right reactor for multiple reactions.
CO5
What is your level of knowledge in rate law determination of enzymatic reactions and bioreactor design.
CO6
CO->PO MAPPING - CH305 - Chemical Reaction Engineering I
CO1 3 2 1 1 1
CO2 2 2
CO3 2 1 1
CO4 2 2 2 1
CO5 2 1 1 1
CO6 2 1
CO->PSO MAPPING - CH305 - Chemical Reaction Engineering I
CO1 3 1
CO2 2 1
CO3 2 1
CO4 2 2
CO5 1 1
CO6 1 1
COURSE->PO MAPPING - CH305 - Chemical Reaction Engineering I
CH305/PO
3 2 2 1 1
COURSE->PSO MAPPING - CH305 - Chemical Reaction Engineering I
PSO1 PSO2 PSO3

CH305/PSO
3 2
AJCE 158
CHE
CH301
CH301 Environmental Engineering 3-1-0:4 2016
No. Course Outcome - CH301 - Environmental Engineering Target
Recognize the environmental legislation and regulation aimed at protecting the environment from
CO1 62%
harmful actions.
Know the different types of treatment processes for drinking water, municipal water and boiler feed
CO2 62%
water
CO3 Know the primary, secondary & tertiary treatment methods used for the waste water treatment. 62%
CO4 Design waste water treatment equipment such as activated sludge process and trickling filters. 62%
CO5 Predict suitable treatment and disposal methods for industrial and hazardous wastes 62%
CO6 Identify air and noise pollution sources and select control methods 62%
COURSE END SURVEY - CH301 - Environmental Engineering
To what extend you are able to recognise the environmental legislation and regulation aimed at protecting
the environment from harmful actions.
CO1
To what extend you are able to know the different types of treatment processes for drinking water, municipal
water and boiler feed water
CO2
To what extend you are able to know the primary, secondary & tertiary treatment methods used for the waste
water treatment
CO3
To what extend you are able to design waste water treatment equipment such as activated sludge process
and trickling filters.
CO4
To what extend you are able to predict suitable treatment and disposal methods for industrial and hazardous
wastes
CO5
To what extend you are able to identify air and noise pollution sources and select control methods
CO6
CO->PO MAPPING - CH301 - Environmental Engineering
AJCE 159
CHE
CO1 3 3 1 1
CO2 2 1 1 1 1 1
CO3 2 1 1 1 1 1
CO4 2 2 3 1 1
CO5 1 1 1 1
CO6 1 1 1 1 1
CO->PSO MAPPING - CH301 - Environmental Engineering
CO1 1
CO2 2 1
CO3 2 1
CO4 2 2
CO5 1
CO6 1
COURSE->PO MAPPING - CH301 - Environmental Engineering
CH301/PO
2 2 3 1 1 3 3 1 1
COURSE->PSO MAPPING - CH301 - Environmental Engineering
PSO1 PSO2 PSO3

CH301/PSO
2 2 1
CH303
CH303 Mass Transfer Operations I 3-0-0:3 2016
No. Course Outcome - CH303 - Mass Transfer Operations I Target
CO1 Explain the phenomena of molecular diffusion and interphase mass transfer 60%
CO2 Explain the operation of gas-liquid contacting equipments 63%
CO3 Design absorption equipments 60%
AJCE 160
CHE
CO4 Explain the process of adsorption, humidification and dehumidification 60%
CO5 Design drying equipments 60%
CO6 Explain the process of crystallization 60%
COURSE END SURVEY - CH303 - Mass Transfer Operations I
To what extent are you able to explain the phenomena of molecular diffusion and interphase mass transfer
CO1
To what extent are you able to explain the operation of gas-liquid contacting equipments
CO2
To what extent are you able to design absorption equipments

CO3
To what extent are you able to explain the process of adsorption, humidification and dehumidification
CO4
To what extent are you able to design drying equipments

CO5
To what extent are you able to explain the process of crystallization

CO6
CO->PO MAPPING - CH303 - Mass Transfer Operations I
CO1 3 2
CO2 3 2
CO3 2 2 1 1
CO4 3 2
CO5 2 2 3 1
CO6 1
CO->PSO MAPPING - CH303 - Mass Transfer Operations I
CO1 2
CO2 2
CO3 1
AJCE 161
CHE
CO4 2
CO5 3 1
CO6 1
COURSE->PO MAPPING - CH303 - Mass Transfer Operations I
CH303/PO
3 2 3 1
COURSE->PSO MAPPING - CH303 - Mass Transfer Operations I
PSO1 PSO2 PSO3

CH303/PSO
3 1
CH307
CH307 Computer Programming in C++ 2-1-0:3 2016
No. Course Outcome - CH307 - Computer Programming in C++ Target
Demonstrate the differences between traditional structured programming and Object-Oriented

CO1 60%
programming, describe datatypes and operators in object oriented programming.
Describe and discuss various decision making and looping statements in object oriented
CO2 60%
programming
Apply knowledge of computing and mathematics using derived datatypes such as functions and
CO3 60%
arrays and user defined datatype such as class
Discuss operator and function overloading and apply the knowledge of overloading and inheritance
CO4 60%
in C++.
CO5 Develop skill to use pointers, memory allocation and data handling through files in C++. 60%
COURSE END SURVEY - CH307 - Computer Programming in C++
To what extent you are able to describe datatypes and operators in object oriented programming?
CO1
To what extent you are able to describe and discuss various decision making and looping statements in
object oriented programming?
CO2
To what extent you are able to apply knowledge of computing and mathematics using derived datatypes
such as functions and arrays and user defined datatype such as class?
CO3
AJCE 162
CHE
To what extent you are able to discuss operator and function overloading and apply the knowledge of
overloading and inheritance in C++?
CO4
To what extent you have developed skill to use pointers, memory allocation and data handling through files
in C++?
CO5
CO->PO MAPPING - CH307 - Computer Programming in C++
CO1 2 1 1 3 1
CO2 2 1 1 3 1 2
CO3 3 2 2 1 3 1
CO4 3 2 2 1 3 1
CO5 2 1 1 1 3 1
CO->PSO MAPPING - CH307 - Computer Programming in C++
CO1 2 1
CO2 1 2
CO3 2 2
CO4 3 2
CO5 3 1
COURSE->PO MAPPING - CH307 - Computer Programming in C++
CH307/PO
3 2 2 1 3 1 2
COURSE->PSO MAPPING - CH307 - Computer Programming in C++
PSO1 PSO2 PSO3

CH307/PSO
3 2 2
CH363
CH363 Principles of Nano Materials and Nano Technology 3-0-0:3 2016
AJCE 163
CHE
No. Course Outcome - CH363 - Principles of Nano Materials and Nano Technology Target
CO1 To understand the fundamental principles of nanomaterials and their classification 61%
CO2 To gain knowledge on the instrumental techniques for characterization of nanoparticles 61%
CO3 To gain understanding of synthesizing various types of nanostructures 61%
CO4 To understand carbon nanomaterials, nanocomposites and their properties 61%
CO5 To gain knowledge on manufacture of nanoscale materials 61%
CO6 To understand the application of nanotechnology and their use in emerging areas 61%
COURSE END SURVEY - CH363 - Principles of Nano Materials and Nano Technology
To what extend are you able to understand the fundamental principles of nanomaterials and their
classification
CO1
To what extend are you able to gain knowledge on the instrumental techniques for characterization of
nanoparticles
CO2
To what extend are you able to familiarize with the synthesis of various types of nanostructures
CO3
To what extend are you able to understand the special category of nanomaterials and their properties
CO4
To what extend are you able to identify laboratory based materials for the manufacture of nanoscale
materials
CO5
To what extend are you able to understand the application of nanotechnology and their emerging areas
CO6
CO->PO MAPPING - CH363 - Principles of Nano Materials and Nano Technology
CO1 3 1
CO2 1 3 3
CO3 1 2
CO4 1 1 3
CO5 1 1 3 2
AJCE 164
CHE
CO6 1 1
CO->PSO MAPPING - CH363 - Principles of Nano Materials and Nano Technology
CO1 3
CO2 1
CO3 1
CO4 1
CO5 1
CO6 1
COURSE->PO MAPPING - CH363 - Principles of Nano Materials and Nano Technology
CH363/PO
3 1 1 3 3 1
COURSE->PSO MAPPING - CH363 - Principles of Nano Materials and Nano Technology
PSO1 PSO2 PSO3

CH363/PSO
3 1
CH333
CH333 CHEMICAL REACTION ENGINEERING LAB 0-0-3:1 2016
No. Course Outcome - CH333 - CHEMICAL REACTION ENGINEERING LAB Target
CO1 Determine kinetic parameters of chemical reactions. 67%
CO2 Determine kinetic parameters of chemical reactions in a batch reactor. 67%
CO3 Analyze the residence time distribution in flow reactors. 67%
CO4 Determine kinetic parameters of chemical reactions in continuous reactor systems. 67%
CO5 Analyze the performance of semi batch reactors. 67%
CO6 Analyze the performance of combined reactors. 67%
COURSE END SURVEY - CH333 - CHEMICAL REACTION ENGINEERING LAB
To what extend you are able to determine kinetic parameters of chemical reactions
CO1
AJCE 165
CHE
To what extend you are able to kinetic parameters of chemical reactions in batch reactor
CO2
To what extend you are able to analyze the residence time distibution in flow reactors
CO3
To what extend you are able to determine kinetic parameters of the chemical reactions in continuous reactor
systems.
CO4
To what extend you are able to analyze the performance of semi batch reactors
CO5
To what extend you are able to analyze the performance of combined reactors.
CO6
CO->PO MAPPING - CH333 - CHEMICAL REACTION ENGINEERING LAB
CO1 3 2 1 1 2 1 1
CO2 3 3 3 1 1 2 1 1
CO3 2 1 1 1 1 2 1 1
CO4 3 3 3 1 1 2 1 1
CO5 3 3 3 1 1 2 1 1
CO6 3 3 3 1 1 2 1 1
CO->PSO MAPPING - CH333 - CHEMICAL REACTION ENGINEERING LAB
CO1 3 2 1
CO2 2 2 1
CO3 2 1 1
CO4 2 2 1
CO5 2 2 1
CO6 2 2 1
COURSE->PO MAPPING - CH333 - CHEMICAL REACTION ENGINEERING LAB
CH333/PO
3 3 3 1 1 2 1 1
AJCE 166
CHE
COURSE->PSO MAPPING - CH333 - CHEMICAL REACTION ENGINEERING LAB
PSO1 PSO2 PSO3

CH333/PSO
3 2 1
CH331
CH331 Heat Transfer Operations Lab 0-0-3:1 2016
No. Course Outcome - CH331 - Heat Transfer Operations Lab Target
CO1 Analyse heat transfer due to conduction through composite material and liquids 67%
CO2 Evaluate heat transfer coefficient in natural and forced convection heat transfer 67%
CO3 Estimate Stefan Boltzmann constant and emissivity in radiative heat transfer 67%
CO4 Analyze condensation phenomenon 67%
CO5 Analyze transient heat conduction 67%
CO6 Analyze effectiveness of heat pipe in conducting heat 67%
COURSE END SURVEY - CH331 - Heat Transfer Operations Lab
To what extent you are able to analyse heat transfer due to conduction through composite material and
liquids
CO1
To what extent you are able to evaluate heat transfer coefficient in natural and forced convection heat
transfer
CO2
To what extent you are able to estimate Stefan Boltzmann constant and emissivity in radiative heat transfer
CO3
To what extent you are able to analyze boiling and condensation phenomenon
CO4
To what extent you are able to analyze transient heat conduction

CO5
To what extent you are able to analyze heat exchanger performance

CO6
CO->PO MAPPING - CH331 - Heat Transfer Operations Lab
AJCE 167
CHE
CO1 3 3 2 2 1 2 1 1
CO2 3 3 2 1 2 1 1
CO3 3 2 2 1 1 2 1 1
CO4 3 3 2 1 2 2 1 1
CO5 3 3 2 1 2 2 1 1
CO6 3 3 2 1 2 1 1 1
CO->PSO MAPPING - CH331 - Heat Transfer Operations Lab
CO1 3 2 1
CO2 3 2 1
CO3 2 1 1
CO4 2 1 1
CO5 2 1 1
CO6 2 1 1
COURSE->PO MAPPING - CH331 - Heat Transfer Operations Lab
CH331/PO
3 3 2 2 2 2 1 1
COURSE->PSO MAPPING - CH331 - Heat Transfer Operations Lab
PSO1 PSO2 PSO3

CH331/PSO
3 2 1
CH341
CH341 Design Project 0-1-2:2 2016
No. Course Outcome - CH341 - Design Project Target
Identify engineering aspects in the design of products, processes, or techniques in the area of
CO1 66%
chemical engineering.
CO2 Relate theoretical principles with product or process designs. 62%
CO3 Develop innovative design solutions for engineering problems, as a team. 66%
AJCE 168
CHE
CO4 Evaluate different solutions based on their engineering principle and suitability. 66%
CO5 Formulate appropriate engineering design for an identified solution through team work. 66%
CO6 Justify the developed design through oral and written communication. 66%
COURSE END SURVEY - CH341 - Design Project
To what extent are you able to identify engineering aspect in the design of any product or process in
chemical engineering?
CO1
How far you be able to relate theoretical principles with the design process?
CO2
How far you be able to develop innovative design solutions for an engineering problem?
CO3
To what extend would you be able to critically evaluate different solutions to an engineering problem?
CO4
How confident are you in working in a team for developing engineering design of a product or process?
CO5
How far you are be able to justify an engineering design that you develop, both orally and in writing?
CO6
CO->PO MAPPING - CH341 - Design Project
CO1 2 1 2 1 1 1 3 3 2 1
CO2 3 3 3 1 2 2 2 2 1
CO3 3 2 3 1 2 1 3 3 2 1
CO4 2 2 1 2 2 2 2 1
CO5 2 2 3 1 2 2 3 3 2 1
CO6 1 1 3 2 2
CO->PSO MAPPING - CH341 - Design Project
CO1 3 1 2
CO2 3 1 2
CO3 3 1 3
AJCE 169
CHE
CO4 3 1 2
CO5 3 1 2
CO6 1 1 2
COURSE->PO MAPPING - CH341 - Design Project
CH341/PO
3 3 3 1 2 1 1 2 3 3 2 2
COURSE->PSO MAPPING - CH341 - Design Project
PSO1 PSO2 PSO3

CH341/PSO
3 1 3
HS300
HS300 Principles of Management 3-0-0:3 2016
No. Course Outcome - HS300 - Principles of Management Target
CO1 Manage people, organisation and environment for achieving competitive advantage 65%
CO2 Critically analyse, evaluate and manipulate management theories and practices 65%
CO3 Prepare an organizational plan and execute planning process based on the goals and objectives 65%
CO4 Design organizational structure and establish the relationship among departments. 65%
Demonstrate staffing and related human resource development functions to manage and appraise
CO5 65%
employees.
To understand the practical implications of studying management with regards to the corporate
CO6 65%
world. Lead employees, subordinates and propose control activities in organizations
COURSE END SURVEY - HS300 - Principles of Management
To what extent does the course help to manage people, organisation and environment for achieving
competitive advantage?
CO1
Is the course helpful to critically analyse, evaluate and manipulate management theories and practices
CO2
Does the course help to prepare an organizational plan and execute planning process based on the goals
and objectives?
CO3
AJCE 170
CHE
Does the course aid in designing organizational structure and establish the relationship among departments.
CO4
To what level did the course demonstrate staffing and related human resource development functions to
manage and appraise employees?
CO5
Did the course help to understand the practical implications of studying management with regards to the
corporate world. Lead employees, subordinates and propose control activities in organizations?
CO6
CO->PO MAPPING - HS300 - Principles of Management
CO1 1 2 2 1 2 2 1 1
CO2 1 1 2 1 2 1 2 1
CO3 1 1 1 1 1 1 1
CO4 1 1 1 1 1 2 1
CO5 1 2 2 2 2 1
CO6 3 2 2 1 2 1 1
CO->PSO MAPPING - HS300 - Principles of Management
CO1 1 1 3
CO2 1 1
CO3 1 3
CO4 2
CO5 2
CO6 3
COURSE->PO MAPPING - HS300 - Principles of Management
HS300/PO
1 1 3 2 2 2 2 2 1
COURSE->PSO MAPPING - HS300 - Principles of Management
PSO1 PSO2 PSO3

HS300/PSO
1 1 3
AJCE 171
CHE
CH361
CH361 Energy Engineering 3-0-0:3 2016
No. Course Outcome - CH361 - Energy Engineering Target
CO1 Demonstrate awareness about the world energy resources and energy consumption 60%
CO2 Describe the applications of the conventional energy resources 60%
CO3 Demonstrate awareness about the applications of solar energy and wind energy 60%
CO4 Demonstrate awareness about the biomass,ocean and geothermal energy resources 60%
CO5 Explain the uses and applications of fuel cells and magnetohydrodynamic generators 60%
CO6 Analyze the energy conservation systems in industries 60%
COURSE END SURVEY - CH361 - Energy Engineering
To what extent you have gained knowledge about the world energy resources and energy consumption
CO1
How well can you describe the applications of the conventional energy resources
CO2
To what extent you have gained knowledge about the applications of solar energy and wind energy
CO3
To what extent you can demonstrate awareness about the biomass,ocean and geothermal energy resources
CO4
How well can you explain the uses and applications of fuel cells and magnetohydrodynamic generators
CO5
To what extent can you analyze the energy conservation systems in industries
CO6
CO->PO MAPPING - CH361 - Energy Engineering
CO1 2 2 3 1 2
CO2 2 1 2 2 1
CO3 1 1 2 2 1
AJCE 172
CHE
CO4 1 1 1 1 1
CO5 1 1 1 1 1
CO6 1 1 1 1 1 1 1
CO->PSO MAPPING - CH361 - Energy Engineering
CO1 2 1
CO2 2 1 1
CO3 2 1 1
CO4 2 1 1
CO5 2 1 1
CO6 2 1 1
COURSE->PO MAPPING - CH361 - Energy Engineering
CH361/PO
2 1 1 1 2 3 1 2
COURSE->PSO MAPPING - CH361 - Energy Engineering
PSO1 PSO2 PSO3

CH361/PSO
2 1 1
CH367
CH367 Numerical Methods for Process Engineers 3-0-0:3 2016
No. Course Outcome - CH367 - Numerical Methods for Process Engineers Target
CO1 Apply the basic concepts of error, convergence etc. in numerical methods 67%
CO2 Solve system of equations using different numerical methods. 67%
CO3 Use suitable interpolation methods to deal with the data in hand 67%
CO4 Choose and apply appropriate numerical schemes to solve differential and integral equations. 67%
CO5 Apply various numerical schemes for solving ODE and PDE. 66%
CO6 Solve initial and final boundary value problems 66%
COURSE END SURVEY - CH367 - Numerical Methods for Process Engineers
AJCE 173
CHE
To what extent can you apply the basic concepts of error, convergence etc. in numerical methods?
CO1
To what extent are you able to solve system of equations using different numerical methods?
CO2
To what extent are you able to use suitable interpolation methods to deal with the data in hand?
CO3
To what extent are you are able to choose and apply appropriate numerical schemes to solve differential and
integral equations?
CO4
To what extent are you able to apply various numerical schemes used for solving ODE and PDE?
CO5
To what extent are you able to solve initial and final boundary value problems?
CO6
CO->PO MAPPING - CH367 - Numerical Methods for Process Engineers
CO1 3 2 1 1 2
CO2 3 2 2 1 2
CO3 2 3 1 2
CO4 3 2 3 2
CO5 3 2 1 2
CO6 3 2 2 2
CO->PSO MAPPING - CH367 - Numerical Methods for Process Engineers
CO1 2 1
CO2 2 1
CO3 2 1
CO4 2 1
CO5 2 1
CO6 2 1
COURSE->PO MAPPING - CH367 - Numerical Methods for Process Engineers
AJCE 174
CHE
CH367/PO
3 3 3 1 2
COURSE->PSO MAPPING - CH367 - Numerical Methods for Process Engineers
PSO1 PSO2 PSO3

CH367/PSO
2 1
CHT303
CHT303 Environmental Engineering 3-1-0:4 2019
COURSE END SURVEY - CHT303 - Environmental Engineering

CO->PO MAPPING - CHT303 - Environmental Engineering
CO->PSO MAPPING - CHT303 - Environmental Engineering
COURSE->PO MAPPING - CHT303 - Environmental Engineering
CHT303/PO
COURSE->PSO MAPPING - CHT303 - Environmental Engineering
PSO1 PSO2 PSO3

CHT303/PSO
HUT310
HUT310 MANAGEMENT FOR ENGINEERS 3-0-0:3 2019
No. Course Outcome - HUT310 - MANAGEMENT FOR ENGINEERS Target
CO1 Recognize the characteristics of management in the contemporary context. 66%
CO2 Describe the functions of management. 66%
CO3 Demonstrate ability in decision making process and productivity analysis. 66%
CO4 Illustrate project management technique and develop a project schedule. 66%
CO5 Summarize the functional areas of management and comprehend the concept of entrepreneurship. 66%
COURSE END SURVEY - HUT310 - MANAGEMENT FOR ENGINEERS
AJCE 175
CHE
I am able to recognize the characteristics of management in the contemporary context.

CO1
I am able to describe the functions of management.

CO2
I am able to demonstrate the ability of decision making and productivity analysis.

CO3
I am able to Illustrate project management techniques and develop a project schedule.

CO4
I am able to summarize the functional areas of management and comprehend the concept of
entrepreneurship.
CO5
CO->PO MAPPING - HUT310 - MANAGEMENT FOR ENGINEERS
CO1
CO2
CO3
CO4
CO5
CO->PSO MAPPING - HUT310 - MANAGEMENT FOR ENGINEERS
CO1
CO2
CO3
CO4
CO5
COURSE->PO MAPPING - HUT310 - MANAGEMENT FOR ENGINEERS
HUT310/PO
COURSE->PSO MAPPING - HUT310 - MANAGEMENT FOR ENGINEERS
PSO1 PSO2 PSO3

HUT310/PSO
AJCE 176
CHE
CHL331
CHL331 Heat Transfer Operations Lab 0-0-3:2 2019
No. Course Outcome - CHL331 - Heat Transfer Operations Lab Target
CO1 Experiment with various modes of heat transfer 65%
CO2 Evaluation the heat transfer coefficients 65%
CO3 Determine the rate of heat transfer in various modes of heat transfer. 65%
CO4 Analyse the working of heat transfer equipments. 65%
CO5 Interpret and present the experimental data meaningfully. 65%
COURSE END SURVEY - CHL331 - Heat Transfer Operations Lab
To what extend you are able to do experiment with various modes of heat transfer
CO1
To what extend you are able to evaluate the heat transfer coefficients
CO2
To what extend you are able to determine the rate of heat transfer in various modes of heat transfer
CO3
To what extend you are able to analyze the working of heat transfer equipment
CO4
To what extend you are able to interpret and present the experimental data meaningfully
CO5
CO->PO MAPPING - CHL331 - Heat Transfer Operations Lab
CO1 3 3
CO2 3 3
CO3 3 2 3
CO4 3 3
CO5 3 3 3
CO->PSO MAPPING - CHL331 - Heat Transfer Operations Lab
AJCE 177
CHE
CO1 3 1
CO2 2 1
CO3 2 1
CO4 2
CO5 2
COURSE->PO MAPPING - CHL331 - Heat Transfer Operations Lab
CHL331/PO
3 3 2 3 3 3 3
COURSE->PSO MAPPING - CHL331 - Heat Transfer Operations Lab
PSO1 PSO2 PSO3

CHL331/PSO
3 1
CHL333
CHL333 Process Control Lab 0-0-3:2 2019
COURSE END SURVEY - CHL333 - Process Control Lab

CO->PO MAPPING - CHL333 - Process Control Lab
CO->PSO MAPPING - CHL333 - Process Control Lab
COURSE->PO MAPPING - CHL333 - Process Control Lab
CHL333/PO
COURSE->PSO MAPPING - CHL333 - Process Control Lab
PSO1 PSO2 PSO3

CHL333/PSO
MCN301
MCN301 Disaster Management 2-0-0:2 2019
AJCE 178
CHE
No. Course Outcome - MCN301 - Disaster Management Target
To understand the various terminologies in use in disaster management parlance and organize each
CO1 55%
of these terms in relation to the disaster management cycle
CO2 To understand different hazard types and vulnerability types and do vulnerability assessment 55%
To understand the components and describe the process of risk assessment, and apply appropriate
CO3 55%
methodologies to assess risk.
To apply the core elements and phases of Disaster Risk Management and develop possible
CO4 55%
measures to reduce disaster risks across sectors and communities.
To understand the factors that determine the nature of disaster response and discuss the various
CO5 55%
disaster response actions.
To understand the various legislations and best practices for disaster management and risk
CO6 55%
reduction at the national and international levels.
COURSE END SURVEY - MCN301 - Disaster Management
Can you understand the various terminologies in use in disaster management parlance and organize each of
these terms in relation to the disaster management cycle?
CO1
Can you understand different hazard types and vulnerability types and do vulnerability assessment?
CO2
Can you understand the components and describe the process of risk assessment, and apply appropriate
methodologies to assess risk?
CO3
Are you able to apply the core elements and phases of Disaster Risk Management and develop possible
measures to reduce disaster risks across sectors and communities?
CO4
Can you understand the factors that determine the nature of disaster response and discuss the various
disaster response actions?
CO5
CO6
CO->PO MAPPING - MCN301 - Disaster Management
CO1 2 2 2 2
CO2 2 3 2 2 2 3 3 2
CO3 2 3 2 2 2 2 3 3 2
AJCE 179
CHE
CO4 3 3 3 2 2 3 2
CO5 3 3 2 2 3 2
CO6 3 2 3 3 2
CO->PSO MAPPING - MCN301 - Disaster Management
CO1 1 2
CO2 3 2
CO3 3 2
CO4 3 3 1
CO5 1 2 3
CO6 2
COURSE->PO MAPPING - MCN301 - Disaster Management
MCN301/PO
3 3 3 2 2 2 3 3 3 2
COURSE->PSO MAPPING - MCN301 - Disaster Management
PSO1 PSO2 PSO3

MCN301/PSO
3 3 3
CHT305
CHT305 CHEMICAL REACTION ENGINEERING 3-1-0:4 2019
No. Course Outcome - CHT305 - CHEMICAL REACTION ENGINEERING Target
Explain the principles of chemical kinetics and determine chemical kinetic parameters using batch
CO1 60.5%
reactor data
CO2 Design of chemical reactors under ideal conditions 60.5%
CO3 Design of single and multiple reactions in ideal reactors 60.5%
CO4 Design chemical reactors for non-isothermal operations 60.5%
CO5 Design chemical reactors for non ideal conditions 60.5%
COURSE END SURVEY - CHT305 - CHEMICAL REACTION ENGINEERING
AJCE 180
CHE
CO1
CO2
CO3 CO4
CO5
CO->PO MAPPING - CHT305 - CHEMICAL REACTION ENGINEERING
CO1 3 3
CO2 3 2 3
CO3 3 2 3
CO4 3 2 3
CO5 3 2 3
CO->PSO MAPPING - CHT305 - CHEMICAL REACTION ENGINEERING
CO1
CO2
CO3
CO4
CO5
COURSE->PO MAPPING - CHT305 - CHEMICAL REACTION ENGINEERING
CHT305/PO
3 3 3
COURSE->PSO MAPPING - CHT305 - CHEMICAL REACTION ENGINEERING
PSO1 PSO2 PSO3

CHT305/PSO
CHT301
CHT301 MASS TRANSFER OPERATIONS -I 3-1-0:4 2019
No. Course Outcome - CHT301 - MASS TRANSFER OPERATIONS -I Target
CO1 Analyse fundamentals of mass transfer operations and estimate diffusion coefficients 50%
CO2 Summarize interface mass transfer and concepts of mass transfer coefficients 50%
AJCE 181
CHE
CO3 Differentiate among different types of equipments for mass transfer operations 55%
CO4 Analyse and design tray and packed columns of gas liquid contacting equipments 50%
CO5 Analyse and design humidification and adsorption systems 50%
CO6 Analyse and design drying and crystallization systems. 50%
COURSE END SURVEY - CHT301 - MASS TRANSFER OPERATIONS -I
CO1 CO2
CO3 CO4
CO5 CO6
CO->PO MAPPING - CHT301 - MASS TRANSFER OPERATIONS -I
CO1 3 3
CO2 3 3
CO3 3
CO4 3 3 3
CO5 3 3
CO6 3 3
CO->PSO MAPPING - CHT301 - MASS TRANSFER OPERATIONS -I
CO1
CO2
CO3
CO4
CO5
CO6
COURSE->PO MAPPING - CHT301 - MASS TRANSFER OPERATIONS -I
CHT301/PO
3 3 3
COURSE->PSO MAPPING - CHT301 - MASS TRANSFER OPERATIONS -I
PSO1 PSO2 PSO3

CHT301/PSO
AJCE 182
CHE
CHT307
CHT307 INSTRUMENTATION AND PROCESS CONTROL 3-1-0:4 2019
No. Course Outcome - CHT307 - INSTRUMENTATION AND PROCESS CONTROL Target
Categorize measuring instruments for industrial applications and illustrate instrumentation for
CO1 61%
temperature, pressure, flow, level, composition and pH
Apply Laplace transforms to solve linear differential equations and to obtain the transfer function
CO2 62%
related to first order systems.
Develop the response of linear open loop second order systems and systems in series for various
CO3 63%
forcing functions.
Describe various types of controllers and analyse servo and regulatory problems of closed loop
CO4 64%
systems by using transient response.
CO5 Analyze the stability of linear systems by using analytical and graphical methods. Design controllers. 65%
COURSE END SURVEY - CHT307 - INSTRUMENTATION AND PROCESS CONTROL
How far you were able to understand the working, principle and applications of industrial measuring
instruments
CO1
able to solve and understand the transfer functions related to first order systems
CO2
Able to develop the response of linear open loop systems and systems in series for various input functions
CO3
Get a thorough knowledge about types of controllers and is able to solve the servo and regulatory problems
of closed loop systems
CO4
Able to analyze stability of linear systems by using analytical and graphical methods
CO5
CO->PO MAPPING - CHT307 - INSTRUMENTATION AND PROCESS CONTROL
CO1 3 3 3 3
CO2 3 3 3 3
CO3 3 3 3 3
AJCE 183
CHE
CO4 3 3 3 3
CO5 3 3 3 3
CO->PSO MAPPING - CHT307 - INSTRUMENTATION AND PROCESS CONTROL
CO1
CO2
CO3
CO4
CO5
COURSE->PO MAPPING - CHT307 - INSTRUMENTATION AND PROCESS CONTROL
CHT307/PO
3 3 3 3
COURSE->PSO MAPPING - CHT307 - INSTRUMENTATION AND PROCESS CONTROL
PSO1 PSO2 PSO3

CHT307/PSO
SEMESTER-6
CH010601
CH010601 Mass transfer operations II 4-0-0:4 2010
COURSE END SURVEY - CH010601 - Mass transfer operations II

CO->PO MAPPING - CH010601 - Mass transfer operations II
CO->PSO MAPPING - CH010601 - Mass transfer operations II
COURSE->PO MAPPING - CH010601 - Mass transfer operations II
CH010601/PO
COURSE->PSO MAPPING - CH010601 - Mass transfer operations II
PSO1 PSO2 PSO3

CH010601/PSO
CH010602
AJCE 184
CHE
CH010602 Environmental Engineering 4-0-0:4 2010
COURSE END SURVEY - CH010602 - Environmental Engineering

CO->PO MAPPING - CH010602 - Environmental Engineering
CO->PSO MAPPING - CH010602 - Environmental Engineering
COURSE->PO MAPPING - CH010602 - Environmental Engineering
CH010602/PO
COURSE->PSO MAPPING - CH010602 - Environmental Engineering
PSO1 PSO2 PSO3

CH010602/PSO
CH010603
CH010603 CHEMICAL TECHNOLOGY II 4-0-0:4 2010
COURSE END SURVEY - CH010603 - CHEMICAL TECHNOLOGY II

CO->PO MAPPING - CH010603 - CHEMICAL TECHNOLOGY II
CO->PSO MAPPING - CH010603 - CHEMICAL TECHNOLOGY II
COURSE->PO MAPPING - CH010603 - CHEMICAL TECHNOLOGY II
CH010603/PO
COURSE->PSO MAPPING - CH010603 - CHEMICAL TECHNOLOGY II
PSO1 PSO2 PSO3

CH010603/PSO
CH010604
CH010604 Process dynamics and control 4-0-0:4 2010
COURSE END SURVEY - CH010604 - Process dynamics and control

CO->PO MAPPING - CH010604 - Process dynamics and control
AJCE 185
CHE
CO->PSO MAPPING - CH010604 - Process dynamics and control
COURSE->PO MAPPING - CH010604 - Process dynamics and control
CH010604/PO
COURSE->PSO MAPPING - CH010604 - Process dynamics and control
PSO1 PSO2 PSO3

CH010604/PSO
CH010606L01
CH010606L01 MATERIAL SCIENCE AND ENGINEERING 4-0-0:4 2010
COURSE END SURVEY - CH010606L01 - MATERIAL SCIENCE AND ENGINEERING

CO->PO MAPPING - CH010606L01 - MATERIAL SCIENCE AND ENGINEERING
CO->PSO MAPPING - CH010606L01 - MATERIAL SCIENCE AND ENGINEERING
COURSE->PO MAPPING - CH010606L01 - MATERIAL SCIENCE AND ENGINEERING
CH010606L01/PO
COURSE->PSO MAPPING - CH010606L01 - MATERIAL SCIENCE AND ENGINEERING
PSO1 PSO2 PSO3

CH010606L01/PSO
CH010606L05
CH010606L05 MODELING AND SIMULATION FOR PROCESS INDUSTRIES 4-0-0:4 2010
COURSE END SURVEY - CH010606L05 - MODELING AND SIMULATION FOR PROCESS INDUSTRIES
CO->PO MAPPING - CH010606L05 - MODELING AND SIMULATION FOR PROCESS INDUSTRIES
CO->PSO MAPPING - CH010606L05 - MODELING AND SIMULATION FOR PROCESS INDUSTRIES
AJCE 186
CHE
COURSE->PO MAPPING - CH010606L05 - MODELING AND SIMULATION FOR PROCESS INDUSTRIES
CH010606L05/PO
COURSE->PSO MAPPING - CH010606L05 - MODELING AND SIMULATION FOR PROCESS INDUSTRIES
PSO1 PSO2 PSO3

CH010606L05/PSO
CH010607
CH010607 ENVIRONMENTAL ENGINERERING LAB 0-0-4:0 2010
COURSE END SURVEY - CH010607 - ENVIRONMENTAL ENGINERERING LAB

CO->PO MAPPING - CH010607 - ENVIRONMENTAL ENGINERERING LAB
CO->PSO MAPPING - CH010607 - ENVIRONMENTAL ENGINERERING LAB
COURSE->PO MAPPING - CH010607 - ENVIRONMENTAL ENGINERERING LAB
CH010607/PO
COURSE->PSO MAPPING - CH010607 - ENVIRONMENTAL ENGINERERING LAB
PSO1 PSO2 PSO3

CH010607/PSO
CH010608
CH010608 Heat Transfer Operations Lab 0-0-4:0 2010
COURSE END SURVEY - CH010608 - Heat Transfer Operations Lab

CO->PO MAPPING - CH010608 - Heat Transfer Operations Lab
CO->PSO MAPPING - CH010608 - Heat Transfer Operations Lab
COURSE->PO MAPPING - CH010608 - Heat Transfer Operations Lab
CH010608/PO
COURSE->PSO MAPPING - CH010608 - Heat Transfer Operations Lab
AJCE 187
CHE
CH010608/PSO PSO1 PSO2 PSO3
CH010605
CH010605 chemical reaction engineering II 4-0-0:4 2010
COURSE END SURVEY - CH010605 - chemical reaction engineering II

CO->PO MAPPING - CH010605 - chemical reaction engineering II
CO->PSO MAPPING - CH010605 - chemical reaction engineering II
COURSE->PO MAPPING - CH010605 - chemical reaction engineering II
CH010605/PO
COURSE->PSO MAPPING - CH010605 - chemical reaction engineering II
PSO1 PSO2 PSO3

CH010605/PSO
CH010606L04
CH010606L04 Energy Engineering 4-0-0:4 2010
COURSE END SURVEY - CH010606L04 - Energy Engineering

CO->PO MAPPING - CH010606L04 - Energy Engineering
CO->PSO MAPPING - CH010606L04 - Energy Engineering
COURSE->PO MAPPING - CH010606L04 - Energy Engineering
CH010606L04/PO
COURSE->PSO MAPPING - CH010606L04 - Energy Engineering
PSO1 PSO2 PSO3

CH010606L04/PSO
English
AJCE 188
CHE
English English 4-0-0:4 2010
COURSE END SURVEY - English - English

CO->PO MAPPING - English - English
CO->PSO MAPPING - English - English
COURSE->PO MAPPING - English - English
English/PO
COURSE->PSO MAPPING - English - English
PSO1 PSO2 PSO3

English/PSO
CH304
CH304 Inorganic chemical technology 3-0-0:3 2016
No. Course Outcome - CH304 - Inorganic chemical technology Target
CO1 Explain various process engineering techniques used manufacturing of industrial gases and acids 67.5%
Describe various unit operations and process involved in Chlor- alkali, various sodium salts
CO2 67.5%
industries
CO3 Analyze different unit processes and unit operations in glass industries 67.5%
Choose best process for a particular product from among different alternatives available in surface
CO4 67.5%
coating manufacturing industry
Troubleshoot various errors in process lines, vessels, and reactions of Fertilizer manufacturing
CO5 67.5%
industries
CO6 Describe various unit operations and process involved in Cement, electrothermal industries 67.5%
COURSE END SURVEY - CH304 - Inorganic chemical technology
To what extend Explain various process engineering techniques used manufacturing of industrial gases and
acids
CO1
To what extend you can describe various unit operations and process involved in Chlor- alkali, various
sodium salts industries
CO2
AJCE 189
CHE
To what extend you can analyze different unit processes and unit operations in glass industries
CO3
To what extend you can select best process for a particular product from among different alternatives
available in surface coating manufacturing industry
CO4
How far can you can troubleshoot various errors in process lines, vessels, and reactions of Fertilizer
manufacturing industries
CO5
To what extend can you describe various unit operations and process involved in Cement, electrothermal
industries
CO6
CO->PO MAPPING - CH304 - Inorganic chemical technology
CO1 2 1 1 1 1
CO2 2 1 1 1 1
CO3 1 1 1 1 1
CO4 2 1 1 1 1 1 1
CO5 2 1 1 1 1 1 1
CO6 2 1 1 1 1 1 1
CO->PSO MAPPING - CH304 - Inorganic chemical technology
CO1 1 1
CO2 1 1
CO3 1 1
CO4 1 1
CO5 1 1
CO6 1 1
COURSE->PO MAPPING - CH304 - Inorganic chemical technology
CH304/PO
2 1 1 1 1 1 1
COURSE->PSO MAPPING - CH304 - Inorganic chemical technology
AJCE 190
CHE
PSO1 PSO2 PSO3

CH304/PSO
1 1
CH306
CH306 Mass transfer operations II 3-0-0:3 2016
No. Course Outcome - CH306 - Mass transfer operations II Target
CO1 Explain the process of distillation 58%
CO2 Design fractionation columns by McCabe-Thiele method 58%
CO3 Design distillation tower by Ponchon-Savarit method 58%
CO4 Design extraction equipments 60%
CO5 Design leaching equipments 60%
CO6 Explain membrane separation process 60%
COURSE END SURVEY - CH306 - Mass transfer operations II
To what extend you are able to explain the process of distillation

CO1
To what extend you are able to design fractionation columns by McCabe-Thiele method
CO2
To what extend you are able to design distillation tower by Ponchon-Savarit method
CO3
To what extend you are able to design extraction equipments

CO4
To what extend you are able to design leaching equipments

CO5
To what extend you are able to explain membrane separation process

CO6
CO->PO MAPPING - CH306 - Mass transfer operations II
AJCE 191
CHE
CO1 1 1
CO2 2 2 3 1 1
CO3 2 2 3 1 1
CO4 2 2 3 1 1
CO5 2 2 3 1 1
CO6 2 1
CO->PSO MAPPING - CH306 - Mass transfer operations II
CO1 2
CO2 3 1
CO3 3 1
CO4 3 1
CO5 3 1
CO6 2
COURSE->PO MAPPING - CH306 - Mass transfer operations II
CH306/PO
2 2 3 1 1
COURSE->PSO MAPPING - CH306 - Mass transfer operations II
PSO1 PSO2 PSO3

CH306/PSO
3 1
CH308
CH308 chemical reaction engineering II 3-0-0:3 2016
No. Course Outcome - CH308 - chemical reaction engineering II Target
CO1 Evaluate the non-ideal behavior in chemical reactors by RTD studies 62%
CO2 Use RTD based models to evaluate reactor conversions 62%
CO3 Analyze the kinetics and design aspects of catalytic and non-catalytic heterogeneous reactions 62%
CO4 Formulate and solve energy balances for non-isothermal operation of chemical reactors 62%
AJCE 192
CHE
CO5 Design chemical reactors for non-isothermal operations 62%
CO6 Evaluate the stability and safety of chemical reactors 62%
COURSE END SURVEY - CH308 - chemical reaction engineering II
To what extent you can evaluate the non-ideal behavior in chemical reactors by RTD studies
CO1
To what extent are you able to use RTD based models to evaluate reactor conversions
CO2
To what extent can you analyze the kinetics and design aspects of catalytic and non-catalytic heterogeneous
reactions
CO3
To what extent can you formulate and solve energy balances for non-isothermal operation of chemical
reactors
CO4
To what extent can you design chemical reactors for non-isothermal operations
CO5
To what extent can you evaluate the stability and safety of chemical reactors
CO6
CO->PO MAPPING - CH308 - chemical reaction engineering II
CO1 3 2 1 1
CO2 3 2 1 1
CO3 3 2 2 1 1
CO4 3 2 2 1 1
CO5 3 3 3 1 1
CO6 2 1 1 1
CO->PSO MAPPING - CH308 - chemical reaction engineering II
CO1 3 2
CO2 3 2
CO3 3 2
AJCE 193
CHE
CO4 3 2
CO5 3 2
CO6 1 1
COURSE->PO MAPPING - CH308 - chemical reaction engineering II
CH308/PO
3 3 3 1 1 1
COURSE->PSO MAPPING - CH308 - chemical reaction engineering II
PSO1 PSO2 PSO3

CH308/PSO
3 2
CH312
CH312 Chemical engineering design- I 3-0-0:3 2016
No. Course Outcome - CH312 - Chemical engineering design- I Target
CO1 Demonstrate general P&ID symbols and I&C drawings used in Chemical Engineering practice. 62%
CO2 Design Pressure vessels and jacketed vessels using given process parameters. 62%
CO3 Design tall columns, supports and non-standard flanges for a vessel with given specifications. 62%
CO4 Design storage vessels for volatile and non-volatile liquids using given process conditions. 62%
Design heat transfer equipment like double pipe heat exchanger, shell and tube heat exchanger and
CO5 62%
condenser.
Construct detailed proportionate drawings of double pipe heat exchanger, shell and tube heat
CO6 62%
exchanger and condenser.
COURSE END SURVEY - CH312 - Chemical engineering design- I
To what extend you are able to Demonstrate general P&ID symbols and I&C drawings used in Chemical
Engineering practice
CO1
To what extend you are able to Design Pressure vessels and jacketed vessels using given process
parameters.
CO2
To what extend you are able to Design tall columns, supports and non-standard flanges for a vessel with
given specifications
CO3
AJCE 194
CHE
To what extend you are able to Design storage vessels for volatile and non-volatile liquids using given
process conditions.
CO4
To what extend you are able to Design heat transfer equipment like double pipe heat exchanger, shell and
tube heat exchanger and condenser
CO5
To what extend you are able to Construct detailed proportionate drawings of double pipe heat exchanger,
shell and tube heat exchanger and condenser
CO6
CO->PO MAPPING - CH312 - Chemical engineering design- I
CO1 2 1 2 1
CO2 3 2 3 1 2
CO3 3 2 3 1 2
CO4 3 2 3 1 2
CO5 3 2 3 1 2
CO6 2 2 3 1 2
CO->PSO MAPPING - CH312 - Chemical engineering design- I
CO1 3 1
CO2 3 2
CO3 3 2
CO4 3 2
CO5 3 2
CO6 1 1
COURSE->PO MAPPING - CH312 - Chemical engineering design- I
CH312/PO
3 2 3 1 2 1
COURSE->PSO MAPPING - CH312 - Chemical engineering design- I
PSO1 PSO2 PSO3

CH312/PSO
3 2
AJCE 195
CHE
CH332
CH332 Mass transfer operations lab 0-0-3:1 2016
No. Course Outcome - CH332 - Mass transfer operations lab Target
Determine the percentage actual recovery of solutes using various leaching methods such as
CO1 63%
simple leaching, cross current leaching, and counter current leaching
CO2 Plan and execute experiments on adsorption isotherm and ternary liquid equilibrium 63%
CO3 Determine the rate of batch drying and diffusion of vapor in air 63%
CO4 Plan and execute experiments on simple distillation and liquid-liquid extraction 63%
Plan and perform experiments using equipment used in industrial operations such as packed bed
CO5 63%
absorption and packed bed distillation
COURSE END SURVEY - CH332 - Mass transfer operations lab
To what extent you are able to determine the percentage actual recovery of solutes using various leaching
methods such as simple leaching, cross current leaching, and counter current leaching?
CO1
To what extent you are able to plan and execute experiments on adsorption isotherm and ternary liquid
equilibrium?
CO2
To what extent you are able to determine the rate of batch drying and diffusion of vapor in air?
CO3
To what extent you are able to plan and execute experiments on simple distillation and liquid-liquid
extraction?
CO4
To what extent you are able to plan and perform experiments using equipment used in industrial operations
such as packed bed absorption and packed bed distillation?
CO5
CO->PO MAPPING - CH332 - Mass transfer operations lab
CO1 3 1 2 1 2 2 1 1
CO2 3 1 2 1 2 2 1 1
CO3 3 1 2 1 2 2 1 1
AJCE 196
CHE
CO4 3 1 2 1 2 2 1 1
CO5 3 1 2 1 2 2 1 1
CO->PSO MAPPING - CH332 - Mass transfer operations lab
CO1 3 2 1
CO2 3 2 1
CO3 3 2 1
CO4 3 2 1
CO5 3 2 1
COURSE->PO MAPPING - CH332 - Mass transfer operations lab
CH332/PO
3 1 2 1 2 2 1 1
COURSE->PSO MAPPING - CH332 - Mass transfer operations lab
PSO1 PSO2 PSO3

CH332/PSO
3 2 1
CH334
CH334 Programming and process simulation lab 0-0-3:1 2016
No. Course Outcome - CH334 - Programming and process simulation lab Target
CO1 Develop software programmes for simulating Chemical Engineering problems using MS Excel 66%
CO2 Model and simulate typical chemical plants using Scilab 66%
CO3 Model and simulate the control systems using scilab 66%
CO4 Model and simulte the chemical process palnt using DWSIM 66%
CO5 Develop C++ programmes to implement numerical methods 66%
COURSE END SURVEY - CH334 - Programming and process simulation lab
To what extend you are able to Develop software programmes for simulating Chemical Engineering
problems using MS Excel
CO1
AJCE 197
CHE
To what extend you are able to Model and simulate typical chemical plants using SCILAB
CO2
To what extend you are able to Apply modelling in scilab

CO3
To what extend you are able to Apply numerical methods in DWSIM

CO4
To what extend you are able to Apply DESIGN OF CHEMICAL ENGINEERING PLANT in DWSIM
CO5
CO->PO MAPPING - CH334 - Programming and process simulation lab
CO1 2 2 3 2 3 3 2 1
CO2 3 3 3 2 3 2 2 1
CO3 2 2 2 1 3 2 2 1
CO4 2 2 2 1 3 2 2 1
CO5 2 2 2 1 3 2 2 1
CO->PSO MAPPING - CH334 - Programming and process simulation lab
CO1 3 1 2
CO2 3 3 2
CO3 3 1 2
CO4 3 1 2
CO5 3 1 2
COURSE->PO MAPPING - CH334 - Programming and process simulation lab
CH334/PO
3 3 3 2 3 3 2 1
COURSE->PSO MAPPING - CH334 - Programming and process simulation lab
PSO1 PSO2 PSO3

CH334/PSO
3 3 2
CH352
AJCE 198
CHE
CH352 Comprehensive Exam 0-1-1:2 2016
No. Course Outcome - CH352 - Comprehensive Exam Target
CO1 Discuss confidently the fundamental aspects of Chemical Engineering 67%
CO2 Demonstrate the depth and breadth of their knowledge on subjects studied in the previous semester 67%
CO3 Evaluate their own theoretical and applied competencies in Chemical Engineering field 67%
CO4 Identify the need for further enhancing knowledge and lifelong learning 67%
CO5 Perform confidently during an interview 67%
CO6 Debate and answer questions of the chosen topic with depth and clarity 67%
COURSE END SURVEY - CH352 - Comprehensive Exam
To what extend you are able to Discuss confidently the fundamental aspects of Chemical Engineering
CO1
To what extend you are able to Demonstrate the depth and breadth of their knowledge on subjects studied in
the previous semester
CO2
To what extend you are able to evaluate your own theoretical and applied competencies in Chemical
CO3 Engineering field
To what extend you are able to Identify the need for further enhancing knowledge and lifelong learning
CO4
To what extend you are able to Perform confidently during an interview

CO5
To what extend you are able to Debate and answer questions of the chosen topic with depth and clarity
CO6
CO->PO MAPPING - CH352 - Comprehensive Exam
CO1 3 1 1 1 3 2 1
CO2 3 3 2 1 2 2 2 3 3 2 2 1
CO3 3 2 2 1 2 1 2 2 2 2 2 1
AJCE 199
CHE
CO4 3 3 2 3 3
CO5 3 3 1
CO6 1 1 1 3 2 1
CO->PSO MAPPING - CH352 - Comprehensive Exam
CO1 2 1
CO2 2 1 2
CO3 1 1 2
CO4 2 2
CO5 2
CO6 3
COURSE->PO MAPPING - CH352 - Comprehensive Exam
CH352/PO
3 3 2 1 2 3 3 3 3 3 2 3
COURSE->PSO MAPPING - CH352 - Comprehensive Exam
PSO1 PSO2 PSO3

CH352/PSO
2 2 3
CH372
CH372 Catalyst Science and Catalytic Processes 3-0-0:3 2016
No. Course Outcome - CH372 - Catalyst Science and Catalytic Processes Target
CO1 Explain the general characteristics of catalysts and the principle behind the catalytic activity 62%
CO2 Outline appropriate preparative method for a catalyst 61%
CO3 Apply the basic concepts and theory for characterization of catalysts 62%
CO4 Identify various industrial catalysts 65%
CO5 Analyze catalyst deactivation 62%
CO6 Describe modern trends in catalyst technology 62%
COURSE END SURVEY - CH372 - Catalyst Science and Catalytic Processes
AJCE 200
CHE
To what extent you are able to explain the general characteristics of catalysts and the principle behind the
catalytic activity?
CO1
To what extent you are able to outline appropriate preparative method for a catalyst?
CO2
To what extent you are able to apply the basic concepts and theory for characterization of catalysts?
CO3
To what extent you are able to identify various industrial catalysts?

CO4
To what extent you are able to analyze catalyst deactivation?

CO5
To what extent you are able to describe modern trends in catalyst technology?
CO6
CO->PO MAPPING - CH372 - Catalyst Science and Catalytic Processes
CO1 3 1 1
CO2 3
CO3 3 1
CO4 2 1 1
CO5 2 1 1
CO6 2
CO->PSO MAPPING - CH372 - Catalyst Science and Catalytic Processes
CO1 2 1
CO2 1
CO3 2 1
CO4 2 1
CO5 1
CO6 1 1
COURSE->PO MAPPING - CH372 - Catalyst Science and Catalytic Processes
AJCE 201
CHE
CH372/PO
3 1 1 1
COURSE->PSO MAPPING - CH372 - Catalyst Science and Catalytic Processes
PSO1 PSO2 PSO3

CH372/PSO
2 1
CH362
CH362 Non-Conventional Petroleum Resources 3-0-0:3 2016
No. Course Outcome - CH362 - Non-Conventional Petroleum Resources Target
CO1 Describe the concepts pertaining to non-conventional petroleum resources 60%
CO2 Apply the concepts related to exploration and development of Shale Gas Reservoirs 60%
CO3 Apply the concepts related to exploration and development of Coal Bed Methane 60%
CO4 Demonstrate awareness related to the concepts related to formation of gas hydrates 60%
CO5 Apply the concepts related to different conversion processes for the production of hydrocarbons 60%
Demonstrate awareness related to environmental issues involved in the development of non-

CO6 60%
conventional hydrocarbon resources
COURSE END SURVEY - CH362 - Non-Conventional Petroleum Resources
To what extent you are able to describe the concepts pertaining to non-conventional petroleum resources?
CO1
To what extent you can apply the concepts related to exploration and development of Shale Gas Reservoirs
to non conventional resources
CO2
To what extent you are able apply the concepts related to Coal Bed Methane to non conventional energy
CO3
To what extent you have developed an awareness related to the concepts related to formation of gas
hydrates
CO4
To what extent you can apply the concepts related to different conversion processes for the production of
hydrocarbons
CO5
AJCE 202
CHE
To what extent you have developed an awareness related to environmental issues involved in the
development of non-conventional hydrocarbon resources
CO6
CO->PO MAPPING - CH362 - Non-Conventional Petroleum Resources
CO1 2 1 1
CO2 2 1 1 1 1 1
CO3 2 1 1 1 1 1
CO4 2 1 1 1 1 1
CO5 2 1 1 1 1 1 1
CO6 2 1 1 1 3 3 3 2 1
CO->PSO MAPPING - CH362 - Non-Conventional Petroleum Resources
CO1
CO2 2 1
CO3 2 1
CO4 2 1
CO5 2 1
CO6 2 1 2
COURSE->PO MAPPING - CH362 - Non-Conventional Petroleum Resources
CH362/PO
2 1 1 1 3 3 3 2 1 1
COURSE->PSO MAPPING - CH362 - Non-Conventional Petroleum Resources
PSO1 PSO2 PSO3

CH362/PSO
2 1 2
CH302
CH302 Process dynamics and control 3-1-0:4 2016
No. Course Outcome - CH302 - Process dynamics and control Target
AJCE 203
CHE
CO1 [1] Solve the differential equations using Laplace transforms 72%
CO2 [2] Determine transfer function for simple chemical process systems 66%
[3] Develop control system block diagram and reduce a given block diagram to input /output transfer
CO3 67%
function model.
CO4 [4] Analyze the stability of open loop and closed loop systems 72%
CO5 [5] Determine the tuning parameters of controllers 66%
CO6 [6] Describe the types of controllers and advanced control systems 66%
COURSE END SURVEY - CH302 - Process dynamics and control
What is your ability to solve differential equations using Laplace transforms

CO1
Are you able to develop transfer functions for simple chemical process systems
CO2
What is the level of your ability to convert physical systems into block diagrams and develop input-output
transfer functions from these diagrams
CO3
Describe your ability to analyze the stability of open and closed loop systems
CO4
Indicate your ability to tune and set controllers

CO5
How do you rate your ability to describe the different types of controllers and advanced control system
CO6
CO->PO MAPPING - CH302 - Process dynamics and control
CO1 3 2 1 2 2
CO2 3 3 2 2 2
CO3 2 2 2 1
CO4 2 2 3 2 1
CO5 1 1 1 1 1
CO6 2
CO->PSO MAPPING - CH302 - Process dynamics and control
AJCE 204
CHE
CO1 3 2
CO2 3 2
CO3 2 1
CO4 3 1
CO5 2
CO6 1
COURSE->PO MAPPING - CH302 - Process dynamics and control
CH302/PO
3 3 3 2 2
COURSE->PSO MAPPING - CH302 - Process dynamics and control
PSO1 PSO2 PSO3

CH302/PSO
3 2
CH374
CH374 Process Design for Pollution Control 3-0-0:3 2016
No. Course Outcome - CH374 - Process Design for Pollution Control Target
CO1 understand the importance of protection and improvement of the environment 60%
CO2 to monitor and design water pollution control systems 60%
CO3 design air pollution control devices 60%
CO4 to understand biomedical pollution control 60%
CO5 design pollution control equipemts like incinertor and microwave 60%
COURSE END SURVEY - CH374 - Process Design for Pollution Control
to which extend where you ale to understand the importance of protection and improvement of the
environment
CO1
to what level where you able to design water polltuion control system
CO2
AJCE 205
CHE
to what level where you able to design air pollution control devices
CO3
to what extend you where able to understand biomedical polution control

CO4
to what level where you able to design pollution control equipments like incinerator and microwave
CO5
CO->PO MAPPING - CH374 - Process Design for Pollution Control
CO1 1 1
CO2 2
CO3 2 2 1 1 2
CO4 2
CO5 3
CO->PSO MAPPING - CH374 - Process Design for Pollution Control
CO1
CO2
CO3
CO4
CO5
COURSE->PO MAPPING - CH374 - Process Design for Pollution Control
CH374/PO
3 1 2 1 1 2
COURSE->PSO MAPPING - CH374 - Process Design for Pollution Control
PSO1 PSO2 PSO3

CH374/PSO
CH364
CH364 Bioprocess Engineering 3-0-0:3 2016
AJCE 206
CHE
No. Course Outcome - CH364 - Bioprocess Engineering Target
CO1 Understand industrial fermentation and design an industrial fermenter 60%
CO2 Distinguish between primary and secondary metabolites 60%
CO3 Identify the process technologies for commercial production of microbial products 60%
CO4 Summarize the production of enzymes and its applications 60%
CO5 Explain the role of microorganisms in bioremediation and in agriculture 60%
CO6 Recognize the role of microbial products in medical therapy and food industries 60%
COURSE END SURVEY - CH364 - Bioprocess Engineering
To what extent you have understood industrial fermentation processes?

CO1
How well can you distinguish between the applications of primary and secondary metabolites?
CO2
How well can you describe the process technologies for commercial production of microbial products?
CO3
To what extent can you summarize the production of enzymes and its applications
CO4
To what extent can you explain the role of microorganisms in bioremediation and in agriculture?
CO5
To what extent can you recognize the role of microbial products in medical therapy and food industries?
CO6
CO->PO MAPPING - CH364 - Bioprocess Engineering
CO1 3 1 3 2
CO2 2
CO3 2
CO4 2
CO5 2
CO6 2
CO->PSO MAPPING - CH364 - Bioprocess Engineering
AJCE 207
CHE
CO1 2 1
CO2 2 1
CO3 2 1
CO4 2 1
CO5 2 2
CO6 2 1
COURSE->PO MAPPING - CH364 - Bioprocess Engineering
CH364/PO
3 1 3 2
COURSE->PSO MAPPING - CH364 - Bioprocess Engineering
PSO1 PSO2 PSO3

CH364/PSO
2 2
Ch366
Ch366 Corrosion Engineering 3-0-0:3 2016
No. Course Outcome - Ch366 - Corrosion Engineering Target
CO1 Define corrosion and understand the principles of corrosion 60%
CO2 Identify and classify various types of corrosion 60%
CO3 Understand the different methods of corrosion testing 60%
CO4 Understand the corrosion prevention methods and design techniques 60%
CO5 Understand the composition of engineering materials and the effects of corrosion on them 60%
CO6 Study and evaluate the corrosion and its prevention in various engineering fields 60%
COURSE END SURVEY - Ch366 - Corrosion Engineering
To what extend you are able to define corrosion and understand the principles of corrosion?
CO1
To what extend you are able to identify and classify various types of corrosion?
CO2
AJCE 208
CHE
To what extend you are able to understand the different methods of corrosion testing?
CO3
To what extend you are able to understand the corrosion prevention methods and design techniques?
CO4
To what extend you are able to understand the composition of engineering materials and the effects of
corrosion on them?
CO5
To what extend you are able to study and evaluate the corrosion and its prevention in various engineering
fields?
CO6
CO->PO MAPPING - Ch366 - Corrosion Engineering
CO1 3 2 1 1
CO2 3 2 1 2
CO3 3 2 2 2 1 2 2 1
CO4 3 3 3 3 2 2 1 1 1
CO5 3 3 2 1 1 1 1 1 1
CO6 3 3 3 3 1 2 2 2 2 2 1
CO->PSO MAPPING - Ch366 - Corrosion Engineering
CO1 3 3 1
CO2 3 3 1
CO3 3 3 2
CO4 3 3 2
CO5 3 3 1
CO6 3 3 3
COURSE->PO MAPPING - Ch366 - Corrosion Engineering
Ch366/PO
3 3 3 3 2 2 2 2 2 2 1
COURSE->PSO MAPPING - Ch366 - Corrosion Engineering
AJCE 209
CHE
PSO1 PSO2 PSO3

Ch366/PSO
3 3 3
SEMESTER-7
CH010701
CH010701 CHEMICAL ENGINEERING DESIGN AND DRAWING I 4-0-0:4 2010
COURSE END SURVEY - CH010701 - CHEMICAL ENGINEERING DESIGN AND DRAWING I

CO->PO MAPPING - CH010701 - CHEMICAL ENGINEERING DESIGN AND DRAWING I
CO->PSO MAPPING - CH010701 - CHEMICAL ENGINEERING DESIGN AND DRAWING I
COURSE->PO MAPPING - CH010701 - CHEMICAL ENGINEERING DESIGN AND DRAWING I
CH010701/PO
COURSE->PSO MAPPING - CH010701 - CHEMICAL ENGINEERING DESIGN AND DRAWING I
PSO1 PSO2 PSO3

CH010701/PSO
CH010702
CH010702 Process Instrumentation 4-0-0:4 2010
COURSE END SURVEY - CH010702 - Process Instrumentation

CO->PO MAPPING - CH010702 - Process Instrumentation
CO->PSO MAPPING - CH010702 - Process Instrumentation
COURSE->PO MAPPING - CH010702 - Process Instrumentation
CH010702/PO
COURSE->PSO MAPPING - CH010702 - Process Instrumentation
PSO1 PSO2 PSO3

CH010702/PSO
AJCE 210
CHE
CH010703
CH010703 Transport Phenomenon 4-0-0:4 2010
COURSE END SURVEY - CH010703 - Transport Phenomenon

CO->PO MAPPING - CH010703 - Transport Phenomenon
CO->PSO MAPPING - CH010703 - Transport Phenomenon
COURSE->PO MAPPING - CH010703 - Transport Phenomenon
CH010703/PO
COURSE->PSO MAPPING - CH010703 - Transport Phenomenon
PSO1 PSO2 PSO3

CH010703/PSO
CH010704
Course L-T- Year of

Course Name
PETROLEUM REFINERY ENGINEERING

CH010704 4-0-0:4 2010
ANDPETROCHEMICALS
COURSE END SURVEY - CH010704 - PETROLEUM REFINERY ENGINEERING ANDPETROCHEMICALS

CO->PO MAPPING - CH010704 - PETROLEUM REFINERY ENGINEERING ANDPETROCHEMICALS
CO->PSO MAPPING - CH010704 - PETROLEUM REFINERY ENGINEERING ANDPETROCHEMICALS
COURSE->PO MAPPING - CH010704 - PETROLEUM REFINERY ENGINEERING ANDPETROCHEMICALS
CH010704/PO
COURSE->PSO MAPPING - CH010704 - PETROLEUM REFINERY ENGINEERING ANDPETROCHEMICALS
PSO1 PSO2 PSO3

CH010704/PSO
CH010706L04
AJCE 211
CHE
CH010706L04 FOOD TECHNOLOGY AND ENGINEERING 4-0-0:4 2010
COURSE END SURVEY - CH010706L04 - FOOD TECHNOLOGY AND ENGINEERING

CO->PO MAPPING - CH010706L04 - FOOD TECHNOLOGY AND ENGINEERING
CO->PSO MAPPING - CH010706L04 - FOOD TECHNOLOGY AND ENGINEERING
COURSE->PO MAPPING - CH010706L04 - FOOD TECHNOLOGY AND ENGINEERING
CH010706L04/PO
COURSE->PSO MAPPING - CH010706L04 - FOOD TECHNOLOGY AND ENGINEERING
PSO1 PSO2 PSO3

CH010706L04/PSO
CH010706L05
CH010706L05 BIOCHEMICAL ENGINEERING 4-0-0:4 2010
COURSE END SURVEY - CH010706L05 - BIOCHEMICAL ENGINEERING

CO->PO MAPPING - CH010706L05 - BIOCHEMICAL ENGINEERING
CO->PSO MAPPING - CH010706L05 - BIOCHEMICAL ENGINEERING
COURSE->PO MAPPING - CH010706L05 - BIOCHEMICAL ENGINEERING
CH010706L05/PO
COURSE->PSO MAPPING - CH010706L05 - BIOCHEMICAL ENGINEERING
PSO1 PSO2 PSO3

CH010706L05/PSO
CH010707
CH010707 CHEMICAL ENGINEERING DESIGN SOFTWARE LAB 0-0-4:0 2010
COURSE END SURVEY - CH010707 - CHEMICAL ENGINEERING DESIGN SOFTWARE LAB
AJCE 212
CHE
CO->PO MAPPING - CH010707 - CHEMICAL ENGINEERING DESIGN SOFTWARE LAB
CO->PSO MAPPING - CH010707 - CHEMICAL ENGINEERING DESIGN SOFTWARE LAB
COURSE->PO MAPPING - CH010707 - CHEMICAL ENGINEERING DESIGN SOFTWARE LAB
CH010707/PO
COURSE->PSO MAPPING - CH010707 - CHEMICAL ENGINEERING DESIGN SOFTWARE LAB
PSO1 PSO2 PSO3

CH010707/PSO
CH010708
CH010708 Mass transfer operations lab 0-0-4:0 2010
COURSE END SURVEY - CH010708 - Mass transfer operations lab

CO->PO MAPPING - CH010708 - Mass transfer operations lab
CO->PSO MAPPING - CH010708 - Mass transfer operations lab
COURSE->PO MAPPING - CH010708 - Mass transfer operations lab
CH010708/PO
COURSE->PSO MAPPING - CH010708 - Mass transfer operations lab
PSO1 PSO2 PSO3

CH010708/PSO
CH010709
CH010709 Seminar 4-0-0:4 2010
COURSE END SURVEY - CH010709 - Seminar

CO->PO MAPPING - CH010709 - Seminar
CO->PSO MAPPING - CH010709 - Seminar
AJCE 213
CHE
COURSE->PO MAPPING - CH010709 - Seminar
CH010709/PO
COURSE->PSO MAPPING - CH010709 - Seminar
PSO1 PSO2 PSO3

CH010709/PSO
CH010705
Course
Course Name L-T-P:C Year of Introduction
Code
ECONOMICS AND MANAGEMENT FOR PROCESS

CH010705 4-0-0:4 2010
INDUSTRIES
COURSE END SURVEY - CH010705 - ECONOMICS AND MANAGEMENT FOR PROCESS INDUSTRIES
CO->PO MAPPING - CH010705 - ECONOMICS AND MANAGEMENT FOR PROCESS INDUSTRIES
CO->PSO MAPPING - CH010705 - ECONOMICS AND MANAGEMENT FOR PROCESS INDUSTRIES
COURSE->PO MAPPING - CH010705 - ECONOMICS AND MANAGEMENT FOR PROCESS INDUSTRIES
CH010705/PO
COURSE->PSO MAPPING - CH010705 - ECONOMICS AND MANAGEMENT FOR PROCESS INDUSTRIES
PSO1 PSO2 PSO3

CH010705/PSO
CH010710
CH010710 Project 0-0-4:0 2010
COURSE END SURVEY - CH010710 - Project

CO->PO MAPPING - CH010710 - Project
CO->PSO MAPPING - CH010710 - Project
COURSE->PO MAPPING - CH010710 - Project
CH010710/PO
COURSE->PSO MAPPING - CH010710 - Project
AJCE 214
CHE
PSO1 PSO2 PSO3

CH010710/PSO
CH010710
CH010710 Project 4-0-0:4 2010

CH010710/PO
PSO1 PSO2 PSO3

CH010710/PSO
CH010709
CH010709 Seminar 0-0-4:0 2010
COURSE END SURVEY - CH010709 - Seminar

CO->PO MAPPING - CH010709 - Seminar
CO->PSO MAPPING - CH010709 - Seminar
COURSE->PO MAPPING - CH010709 - Seminar
CH010709/PO
COURSE->PSO MAPPING - CH010709 - Seminar
PSO1 PSO2 PSO3

CH010709/PSO
CH401
AJCE 215
CHE
CH401 Transport Phenomena in Processes 3-1-0:4 2016
No. Course Outcome - CH401 - Transport Phenomena in Processes Target
Analyse the dependence of temperature and pressure on the transport coefficients and derive
CO1 53.5%
simple shell balances for momentum transport
CO2 Apply the governing equations of momentum transport in solving engineering problems 53.5%
Derive simple shell balances to formulate conservation equations of heat transport apply them in
CO3 53.5%
simple engineering problems.
CO4 Apply the governing equations of heat transport in solving engineering problems 53.5%
CO5 Understand the concepts diffusivity and the mechanism of Mass Transport 53.5%
Develop analogies between the transport processes and apply them in solving engineering
CO6 53.5%
problems
COURSE END SURVEY - CH401 - Transport Phenomena in Processes
To what extent you are able to analyse and derive shell balances for momentum transport
CO1
To what extent are you able to apply the governing equations of momentum transport in solving engineering
problems
CO2
How well can you formulate conservation equations of heat transport

CO3
To what extent can you apply the governing equations of heat transport in solving engineering problems
CO4
How well have you understood the concepts diffusivity and the mechanism of Mass Transport
CO5
To what extent can you develop analogies between the transport processes and apply them in solving
engineering problems
CO6
CO->PO MAPPING - CH401 - Transport Phenomena in Processes
CO1 3 3 1 1 1
CO2 3 3 2 2 1
AJCE 216
CHE
CO3 3 3 2 2 1
CO4 3 3 2 2 1
CO5 3 2 1 1 1
CO6 2 2 1 1 1
CO->PSO MAPPING - CH401 - Transport Phenomena in Processes
CO1 3 2
CO2 3 2
CO3 3 2
CO4 3 2
CO5 3 2
CO6 3 2
COURSE->PO MAPPING - CH401 - Transport Phenomena in Processes
CH401/PO
3 3 2 2 1
COURSE->PSO MAPPING - CH401 - Transport Phenomena in Processes
PSO1 PSO2 PSO3

CH401/PSO
3 2
CH403
CH403 Process Instrumentation 3-0-0:3 2016
No. Course Outcome - CH403 - Process Instrumentation Target
CO1 Explain the physics of pressure, temperature, level and flow measurement 62.5%
Demonstrate the mechanical and electrical aspects of instruments used to measure temperatures of
CO2 62.5%
processes and their range of applicability and characteristics
Recognize the mechanical and electrical aspects of pressure and level measurement devices and
CO3 62.5%
their suitability for process-dependent application
Illustrate the principles and working of variety of meters and techniques used for liquid and gas flow
CO4 62.5%
measurements.
CO5 Identify the techniques used to estimate and analyse moisture contents in solids, liquids and gases 62.5%
AJCE 217
CHE
Demonstrate the principles and operations of advanced sophisticated analysis techniques for
CO6 material composition & characteristics using spectroscopy, chromatography and polarography as 62.5%
well as fundamentals of P& I diagrams
COURSE END SURVEY - CH403 - Process Instrumentation
To what extent you are able to explain the physics of pressure, temperature, level and flow measurement?
CO1
How well can you demonstrate mechanical and electrical aspects of instruments used to measure
temperatures of processes and their range of applicability and characteristics?
CO2
How well do you recognize the mechanical and electrical aspects of pressure and level measurement
devices and their suitability for process-dependent applications?
CO3
To what extent can you illustrate the principles and working of meters and techniques used for liquid and gas
flow measurement?
CO4
How well can you identify the techniques used to estimate and analyse moisture content in solids, liquids
and gases?
CO5
How well can you demonstrate the principle and operations of advanced sophisticated analysis of material
composition & characteristics using spectroscopy, chromatography and polarography, as well as
CO6 fundamentals of P& I diagrams?
CO->PO MAPPING - CH403 - Process Instrumentation
CO1 3
CO2 3 1 1
CO3 3 1 1
CO4 3 1 1
CO5 3 1 1
CO6 3 1 1 2
CO->PSO MAPPING - CH403 - Process Instrumentation
CO1 3 2
AJCE 218
CHE
CO2 3 2
CO3 3 2
CO4 3 2
CO5 2 2
CO6 3 2
COURSE->PO MAPPING - CH403 - Process Instrumentation
CH403/PO
3 1 1 2
COURSE->PSO MAPPING - CH403 - Process Instrumentation
PSO1 PSO2 PSO3

CH403/PSO
3 2
CH405
CH405 Chemical Engineering Design - II 3-0-0:3 2016
No. Course Outcome - CH405 - Chemical Engineering Design - II Target
CO1 Select and design single and multiple effect evaporators used in industries 62%
CO2 Design cooling towers for process industries 62%
CO3 Select and design suitable drying equipment for process and allied industries 62%
CO4 Design absorption and stripping columns for process industries 62%
CO5 Select and design distillation columns for refinery and other process industries 62%
CO6 Design suitable extraction columns for industrial application 62%
COURSE END SURVEY - CH405 - Chemical Engineering Design - II
To what extend you are able to select and design single and multiple effect evaporators used in industries
CO1
To what extend you are able to design cooling towers for process industries
CO2
To what extend you are able to select and design suitable drying equipment for process and allied industries
CO3
AJCE 219
CHE
To what extend you are able to select and design distillation columns for refinery and other process
industries
CO4
To what extend you are able to design absorption and stripping columns for process industries
CO5
To what extend you are able to design suitable extraction columns for industrial application
CO6
CO->PO MAPPING - CH405 - Chemical Engineering Design - II
CO1 3 2 3 1 1
CO2 3 2 3 1 1
CO3 3 2 3 1 1
CO4 3 2 3 1 1
CO5 3 2 3 1 1
CO6 3 2 3 1 1
CO->PSO MAPPING - CH405 - Chemical Engineering Design - II
CO1 3 2
CO2 3 2
CO3 3 2
CO4 3 2
CO5 3 2
CO6 3 2
COURSE->PO MAPPING - CH405 - Chemical Engineering Design - II
CH405/PO
3 2 3 1 1
COURSE->PSO MAPPING - CH405 - Chemical Engineering Design - II
PSO1 PSO2 PSO3

CH405/PSO
3 2
AJCE 220
CHE
CH409
CH409 Organic Chemical Technology 3-0-0:3 2016
No. Course Outcome - CH409 - Organic Chemical Technology Target
CO1 Demonstrate the manufacturing processes in food industry 68%
CO2 Apply the concepts of unit processes in the manufacture of sugars, starches and related products 68%
CO3 Explain the conversion of raw materials into useful organic products like soaps and detergents 68%
CO4 Illustrate the manufacturing process of various organic chemicals 68%
CO5 Identify the process parameters for the manufacture of various synthetic organic chemicals. 68%
Demonstrate the manufacturing processes and properties of organic chemicals like dyes,
CO6 68%
intermediates, pesticides, pharmaceuticals etc.
COURSE END SURVEY - CH409 - Organic Chemical Technology
How far have you understood the basic processing industries?

CO1
To what extent have you understood the sugar manufacturing and related products?
CO2
How far have you understood the process production of soap,detergent production?
CO3
Answer Choice- Most acceptable/Moderately Acceptable Acceptable/Less acceptable/Not acceptable
To what extent have you understood the preparation of various organic chemicals?
CO4
How far have you understood the preparation of dyes ,organic chemicals and intermediates?
CO5
To what extend have you understood the outline the manufacturing process and properties of organic
chemicals like dyes,intermediates etc?
CO6
CO->PO MAPPING - CH409 - Organic Chemical Technology
CO1 3
CO2 3 2 2 1
CO3 3 1
AJCE 221
CHE
CO4 3 1
CO5 3 1
CO6 3 1
CO->PSO MAPPING - CH409 - Organic Chemical Technology
CO1 3 1
CO2 3 1
CO3 3 1
CO4 3 1
CO5 3 1
CO6 3 1
COURSE->PO MAPPING - CH409 - Organic Chemical Technology
CH409/PO
3 2 2 1
COURSE->PSO MAPPING - CH409 - Organic Chemical Technology
PSO1 PSO2 PSO3

CH409/PSO
3 1
CH461
CH461 Petroleum Refinery Engineering 3-0-0:3 2016
No. Course Outcome - CH461 - Petroleum Refinery Engineering Target
CO1 List different sources of Petroleum. 66%
CO2 Recognize primary processing techniques of crude oil 65.7%
CO3 Categories appropriate cracking methods required for different crude oil. 65.7%
CO4 Choose a required catalytic cracking technique for a given crude. 65.7%
CO5 Outline various products and its production process in petroleum industries. 65.7%
CO6 Characterize products from petroleum industry. 65.7%
COURSE END SURVEY - CH461 - Petroleum Refinery Engineering
AJCE 222
CHE
To what extend you will be able to list different sources of petroleum?

CO1
Will you able to recognize primary processing techniques of crude oil?

CO2
Would you be able to categories appropriate cracking methods required for different crude oil?
CO3
How effective are you in choosing a required catalytic cracking technique for a given crude oil?
CO4
To what extend you will be able categories products and its production process in petroleum industries?
CO5
To what extend can you apply the characterization methods for products from petroleum industry?
CO6
CO->PO MAPPING - CH461 - Petroleum Refinery Engineering
CO1 2 1
CO2 2
CO3 2
CO4 2 1 1 1 1
CO5 3
CO6 2 1 1
CO->PSO MAPPING - CH461 - Petroleum Refinery Engineering
CO1 1
CO2 2 1
CO3 2 1
CO4 3 2
CO5 1
CO6 1 1
COURSE->PO MAPPING - CH461 - Petroleum Refinery Engineering
AJCE 223
CHE
CH461/PO
3 1 1 1 1
COURSE->PSO MAPPING - CH461 - Petroleum Refinery Engineering
PSO1 PSO2 PSO3

CH461/PSO
3 2
CH471
CH471 Solid Waste Management 3-0-0:3 2016
No. Course Outcome - CH471 - Solid Waste Management Target
Analyze solid waste management systems with respect to its physical, chemical and biological
CO1 67%
properties.
CO2 Identify changing nature of solid wastes and the factors affecting the solid waste generation rates. 67%
CO3 Select appropriate method for solid waste collection and transportation. 67%
CO4 Select appropriate method for solid waste disposal. 67%
CO5 Design solid waste management systems. 67%
CO6 Analyze the material, energy recovery operations and hazardous solid waste management. 67%
COURSE END SURVEY - CH471 - Solid Waste Management
What is your ability to analyze solid waste management systems with respect to its physical, chemical and
biological properties.
CO1
To what extent you are able to identify changing nature of solid wastes and the factors affecting the solid
waste generation rates.
CO2
What is your level of ability to select appropriate method for solid waste collection and transportation.
CO3
What is your level of ability to select appropriate method for solid waste disposal.
CO4
What is level of knowledge in the design solid waste management systems.
AJCE 224
CHE
What is your ability to analyze the material, energy recovery operations and hazardous solid waste
management.
CO6
CO->PO MAPPING - CH471 - Solid Waste Management
CO1 2 1 1 3 3 1 2 1
CO2 2 1 1 2 2 1 1 1
CO3 2 2 1 1 2 2 1 1 1
CO4 3 2 2 1 3 3 1 1 1 1 1
CO5 3 3 3 2 3 3 1 1 1 1 1
CO6 2 2 2 2 2 2 1 1 1 1 1
CO->PSO MAPPING - CH471 - Solid Waste Management
CO1 3 2 1
CO2 2 1 1
CO3 2 1
CO4 3 1 1
CO5 3 2 1
CO6 3 1 1
COURSE->PO MAPPING - CH471 - Solid Waste Management
CH471/PO
3 3 3 2 3 3 1 1 1 2 1
COURSE->PSO MAPPING - CH471 - Solid Waste Management
PSO1 PSO2 PSO3

CH471/PSO
3 2 1
CH431
CH431 Process Control Lab 0-0-3:1 2016
No. Course Outcome - CH431 - Process Control Lab Target
AJCE 225
CHE
CO1 Determine the dynamics and dynamic parameters of liquid level systems 62.2%
Determine the dynamics and dynamic parameters of temperature measuring devices like
CO2 62.1%
thermometer
CO3 Demonstrate the step response of a second order system 62.1%
CO4 Demonstrate different types of control mechanisms 62.1%
CO5 Determine the characteristics of control valves 62.1%
CO6 Demonstrate the application of software tools for process control 62.1%
COURSE END SURVEY - CH431 - Process Control Lab
To what extent you are able to determine the dynamics and dynamic parameters of liquid level systems?
CO1
How proficient are you in the dynamics and dynamic parameters of temperature measuring devices like
thermometer?
CO2
To what extent you are able to demonstrate the step response of a second order system?
CO3
How far you are able to demonstrate different types of control mechanisms?
CO4
To what extent you can determine the characteristics of control valves

CO5
To what extent are you able to demonstrate the application of software tools for process control?
CO6
CO->PO MAPPING - CH431 - Process Control Lab
CO1 3 3 2 3 3 1 2 2 1
CO2 3 3 2 3 3 1 2 2 1
CO3 3 2 2 1 1 2 2 1
CO4 3 2 2 1 1 2 2 1
CO5 3 2 2 1 1 2 2 1
CO6 2 2 2 2 3 2 2 1
CO->PSO MAPPING - CH431 - Process Control Lab
AJCE 226
CHE
CO1 3 2 1
CO2 3 2 1
CO3 3 2 1
CO4 3 2 1
CO5 3 2 1
CO6 3 2 1
COURSE->PO MAPPING - CH431 - Process Control Lab
CH431/PO
3 3 2 3 3 1 2 2 1
COURSE->PSO MAPPING - CH431 - Process Control Lab
PSO1 PSO2 PSO3

CH431/PSO
3 2 1
CH451
CH451 Seminar & Project Preliminary 0-1-4:2 2016
No. Course Outcome - CH451 - Seminar & Project Preliminary Target
CO1 Develop presentation skills and provide transfer of knowledge effectively to an audience 70%
CO2 Analyze scientific literature for assimilating knowledge 70%
CO3 Write technical documents and give oral presentations 70%
CO4 Describe acquired information using a variety of modern presentation tools 70%
Identify a current engineering problem of professional interest, analyze it and propose a preliminary
CO5 70%
work plan to solve it.
COURSE END SURVEY - CH451 - Seminar & Project Preliminary
To what extent have you developed presentation skills and provide transfer of knowledge effectively to an
audience
CO1
To what extent can you analyze scientific literature for assimilating knowledge
CO2
AJCE 227
CHE
How well are you able to write technical documents and give oral presentations
CO3
How well can you describe acquired information using a variety of modern presentation tools
CO4
How well are you able to identify a current engineering problem of professional interest, analyze it and
propose a preliminary work plan to solve it.
CO5
CO->PO MAPPING - CH451 - Seminar & Project Preliminary
CO1 3 3 1
CO2 1 2 1 1 3 3 1
CO3 2 3 1
CO4 3 2 3 1
CO5 3 2 2 1 2 1 1 1 2 2 2 1
CO->PSO MAPPING - CH451 - Seminar & Project Preliminary
CO1 3
CO2 2 2 2
CO3 3
CO4 2
CO5 2 2 2
COURSE->PO MAPPING - CH451 - Seminar & Project Preliminary
CH451/PO
3 2 2 1 3 1 1 1 3 3 2 1
COURSE->PSO MAPPING - CH451 - Seminar & Project Preliminary
PSO1 PSO2 PSO3

CH451/PSO
2 2 3
CH407
AJCE 228
CHE
CH407 BIOCHEMICAL ENGINEERING 3-0-0:3 2016
No. Course Outcome - CH407 - BIOCHEMICAL ENGINEERING Target
CO1 Become familiar with types of cells, their structure and composition. 72%
Understand what enzymes are, how they are classified, what their function is, and the mechanistic
CO2 72%
models describing their function in enzymatic reactions.
CO3 Compare methods for production, purification, characterization and immobilization of enzymes 72%
CO4 Grasp the mechanisms and energetics of metabolic pathways in the cell 72%
CO5 Measure and classify stages of microbial growth and understand fermentation schemes 72%
CO6 Apply the basic concepts of mass and heat transfer in reactor design for biochemical processes 72%
COURSE END SURVEY - CH407 - BIOCHEMICAL ENGINEERING
Did you get the basic biology for understanding biochemical process systems
CO1
What is the level of your understanding on enzyme classes, functions and enzymatic reactions
CO2
Will you be able to characterize, purify and immobilize an enzyme

CO3
Did the study of various metabolic pathways in cell help your understanding of a biological process
CO4
What is the level of your knowledge on microbial growth and fermentation schemes
CO5
What is your understanding about applying unit operations to a bioprocess

CO6
CO->PO MAPPING - CH407 - BIOCHEMICAL ENGINEERING
CO1 3 1
CO2 3 1 1 1 1
CO3 3 2
CO4 3 1 1 1
AJCE 229
CHE
CO5 3 1 1 1 1
CO6 3 2 3 1 2
CO->PSO MAPPING - CH407 - BIOCHEMICAL ENGINEERING
CO1 1
CO2 1 1
CO3 2 1
CO4 2 2
CO5 2 2
CO6 3 2
COURSE->PO MAPPING - CH407 - BIOCHEMICAL ENGINEERING
CH407/PO
3 2 3 1 2 1
COURSE->PSO MAPPING - CH407 - BIOCHEMICAL ENGINEERING
PSO1 PSO2 PSO3

CH407/PSO
3 2
CH467
CH467 Process Modelling and Simulation 3-0-0:3 2016
No. Course Outcome - CH467 - Process Modelling and Simulation Target
CO1 Explain basic concepts in modelling and simulation and identify apprropriate models. 70%
CO2 Derive basic equations in momentum heat and mass transfer. 70%
CO3 Develop mathematical models for chemical engineering systems. 70%
CO4 Identify the variations in process parameters for unit operations like distillation and boiling. 70%
CO5 Design mathematical models for distributed systems such as jacketed vessels. 70%
CO6 Apply suitable numerical simulation methods for the solution of models. 70%
COURSE END SURVEY - CH467 - Process Modelling and Simulation
AJCE 230
CHE
How far you are able to explain basic concepts in modelling and simulation and identify appropriate models?
CO1
How far you are able to derive basic equations in momentum heat and mass transfer?
CO2
To what extent you can develop mathematical models for chemical engineering systems?
CO3
How far you are able to identify variations in process parameters for unit operations like distillation and
boiling?
CO4
To what extent can you design mathematical models for distributed systems such as jacketed vessels?
CO5
How far you are able to apply suitable numerical simulation methods for the solution of models?
CO6
CO->PO MAPPING - CH467 - Process Modelling and Simulation
CO1 3 3 2 1 2
CO2 3 2 2 1
CO3 3 3 2 1 1
CO4 2 2 2 1 1
CO5 2 2 2 1 1
CO6 2 2 2 1 3
CO->PSO MAPPING - CH467 - Process Modelling and Simulation
CO1 3 2
CO2 3 2
CO3 2 2
CO4 2 2
CO5 1 1
CO6 2 2
COURSE->PO MAPPING - CH467 - Process Modelling and Simulation
AJCE 231
CHE
CH467/PO
3 3 2 1 3
COURSE->PSO MAPPING - CH467 - Process Modelling and Simulation
PSO1 PSO2 PSO3

CH467/PSO
3 2
CH463
CH463 Enzyme Engineering 3-0-0:3 2016
COURSE END SURVEY - CH463 - Enzyme Engineering

CO->PO MAPPING - CH463 - Enzyme Engineering
CO->PSO MAPPING - CH463 - Enzyme Engineering
COURSE->PO MAPPING - CH463 - Enzyme Engineering
CH463/PO
COURSE->PSO MAPPING - CH463 - Enzyme Engineering
PSO1 PSO2 PSO3

CH463/PSO
SEMESTER-8
CH010802
CH010802 Nano Technology 0-0-0:0 2014
No. Course Outcome - CH010802 - Nano Technology Target
CO1 Explain the important characteristics of nanostructured materials 60%
CO2 Identify different instruments for characterization of nanomaterials 60%
CO3 Identify the various techniques for synthesis of nanomaterials 60%
CO4 Outline various manufacturing techniques of nanoscale manipulation 60%
CO5 Analyze the various applications of nanomaterials and develop novel applications 60%
COURSE END SURVEY - CH010802 - Nano Technology
AJCE 232
CHE
How well can you explain the important characteristics of nanostructured materials
CO1
How well can you Identify different instruments for characterization of nanomaterials
CO2
How well can you Identify the various techniques for synthesis of nanomaterials
CO3
How well can you outline various manufacturing techniques of nanoscale manipulation
CO4
How well can you analyze the various applications of nanomaterials and develop novel applications
CO5
CO->PO MAPPING - CH010802 - Nano Technology
CO1 2 2 1 1
CO2 1 1 3 1
CO3 2 1 2 3
CO4 1 1 2 2
CO5 3 2 2 1
CO->PSO MAPPING - CH010802 - Nano Technology
CO1 3 3
CO2 1 1
CO3 1
CO4 1
CO5 1 1
COURSE->PO MAPPING - CH010802 - Nano Technology
CH010802/PO
3 2 2 3 3
COURSE->PSO MAPPING - CH010802 - Nano Technology
PSO1 PSO2 PSO3
AJCE 233
CHE
CH010802/PSO
3 3
CH010803
CH010803 Chemical Process Optimization 0-0-0:0 2014
No. Course Outcome - CH010803 - Chemical Process Optimization Target
CO1 Apply optimization techniques to formulate and solve practical problems 60%
CO2 Apply different numerical methods for optimization of single variable unconstrained functions 60%
CO3 Solve unconstrained multivariable optimization problems 60%
Solve linear programming and nonlinear programming problems with constraints using various
CO4 60%
methods
CO5 Analyze typical applications of optimization techniques in chemical process industries 60%
COURSE END SURVEY - CH010803 - Chemical Process Optimization
To what extent you are able to apply optimization techniques to formulate and solve practical problems?
CO1
To what extent you are able to apply different numerical metods for optimization of single variable
unconstrained functions?
CO2
To what extent you ar able to solve unconstrained multivariable optimization problems?

CO3
To what extent you are able to solve linear programming problems using various methods?
CO4
To what extent you are able to analyze typical optimization issues in chemical process industries?
CO5
CO->PO MAPPING - CH010803 - Chemical Process Optimization
CO1 3 3 2 2 2 1 1 1
CO2 3 3 2 2 2 1 1 1
CO3 3 3 1 2 2 1 1 1
AJCE 234
CHE
CO4 3 3 2 2 2 1 1 1
CO5 3 3 1 2 2 1 1 1
CO->PSO MAPPING - CH010803 - Chemical Process Optimization
CO1 3 1
CO2 3 1
CO3 3 1
CO4 3 1
CO5 3 1
COURSE->PO MAPPING - CH010803 - Chemical Process Optimization
CH010803/PO
3 3 2 2 2 1 1 1
COURSE->PSO MAPPING - CH010803 - Chemical Process Optimization
PSO1 PSO2 PSO3

CH010803/PSO
3 1
CH010801
CH010801 Chemical Engineering Design and Drawing II 0-0-0:0 2014
No. Course Outcome - CH010801 - Chemical Engineering Design and Drawing II Target
CO1 Select and design single and multiple effect evaporators used in industries 60%
CO2 Design cooling towers for process industries 60%
CO3 Select and design distillation columns for refinery and other process industries 60%
CO4 Design absorption and stripping columns for process industries 60%
CO5 Design suitable extraction columns for industrial applications 60%
CO6 Select and design suitable drying equipment for process and allied industries 60%
COURSE END SURVEY - CH010801 - Chemical Engineering Design and Drawing II
To what extent you are able to select and design the relevant evaporators for industries
CO1
AJCE 235
CHE
How would you rate your ability to design a cooling tower for industrial purpose?
CO2
To what extent you are able to design distillation columns for process industries?
CO3
To what extent you are able to design absorption and stripping columns for process industries?
CO4
How would you rate your ability to design extractors for industries?
CO5
To what extent you are able to design suitable drying equipment for process and allied industries
CO6
CO->PO MAPPING - CH010801 - Chemical Engineering Design and Drawing II
CO1 3 2 3 2 1 1 1 2 2 2
CO2 3 3 3 2 2 1 1 1 1 1 3 3
CO3 3 2 3 3 3 1 1 1 2 2 3
CO4 3 3 2 3 2 1 1 2 2 3
CO5 3 3 3 2 2 1 1 2 2
CO6 3 3 2 2 1 1 1 1 1 1
CO->PSO MAPPING - CH010801 - Chemical Engineering Design and Drawing II
CO1 1 1
CO2 1 1
CO3 1 1 1
CO4 1 1 1
CO5 1 1
CO6 1 1
COURSE->PO MAPPING - CH010801 - Chemical Engineering Design and Drawing II
CH010801/PO
3 3 3 3 3 1 1 1 1 2 3 3
COURSE->PSO MAPPING - CH010801 - Chemical Engineering Design and Drawing II
AJCE 236
CHE
PSO1 PSO2 PSO3

CH010801/PSO
1 1 1
CH010804L05
CH010804L05 Numerical Methods for Chemical Engineers 4-0-0:4 2010
COURSE END SURVEY - CH010804L05 - Numerical Methods for Chemical Engineers

CO->PO MAPPING - CH010804L05 - Numerical Methods for Chemical Engineers
CO->PSO MAPPING - CH010804L05 - Numerical Methods for Chemical Engineers
COURSE->PO MAPPING - CH010804L05 - Numerical Methods for Chemical Engineers
CH010804L05/PO
COURSE->PSO MAPPING - CH010804L05 - Numerical Methods for Chemical Engineers
PSO1 PSO2 PSO3

CH010804L05/PSO
CH010805G04
CH010805G04 Safety in Chemical Industries 3-1-0:4 2014
No. Course Outcome - CH010805G04 - Safety in Chemical Industries Target
CO1 Explain the basic concepts of industrial safety 65%
CO2 Identify various hazards in a chemical industry. 65%
CO3 Do documentations regarding various safety related works 65%
CO4 Outline the safety practices in industries 65%
CO5 Propose emergency procedures to be adapted to chemical industries 65%
COURSE END SURVEY - CH010805G04 - Safety in Chemical Industries
To what extend you are able to explain the basic concepts of industrial safety
CO1
AJCE 237
CHE
To what extend you can Identify various hazards in a chemical industry

CO2
To what extend can you do documentations regarding various safety related works
CO3
To what extend you can outline the safety practices in industries

CO4
To what extend you can propose emergency procedures to be adapted in chemical industries
CO5
CO->PO MAPPING - CH010805G04 - Safety in Chemical Industries
CO1 2 3 2 1 1 3 2 2 1 2 2 3
CO2 2 3 3 2 1 3 1 2 2 2 2 2
CO3 2 3 3 1 1 3 2 3 3 3 3 1
CO4 3 2 2 3 1 3 2 2 2 3 2 2
CO5 3 2 3 2 2 3 2 2 2 2 3 2
CO->PSO MAPPING - CH010805G04 - Safety in Chemical Industries
CO1 3 3 3
CO2 3 3 3
CO3 3 3 3
CO4 3 3 3
CO5 3 3 3
COURSE->PO MAPPING - CH010805G04 - Safety in Chemical Industries
CH010805G04/PO
3 3 3 3 2 3 2 3 3 3 3 3
COURSE->PSO MAPPING - CH010805G04 - Safety in Chemical Industries
PSO1 PSO2 PSO3

CH010805G04/PSO
3 3 3
CH010805G01
AJCE 238
CHE
CH010805G01 Project Engineering 4-0-0:4 2010
COURSE END SURVEY - CH010805G01 - Project Engineering

CO->PO MAPPING - CH010805G01 - Project Engineering
CO->PSO MAPPING - CH010805G01 - Project Engineering
COURSE->PO MAPPING - CH010805G01 - Project Engineering
CH010805G01/PO
COURSE->PSO MAPPING - CH010805G01 - Project Engineering
PSO1 PSO2 PSO3

CH010805G01/PSO
CH010807
CH010807 Project 0-0-0:0 2014
No. Course Outcome - CH010807 - Project Target
Apply the relevant knowledge and skills, which are acquired within the technical area to solve a
CO1 60%
given problem
CO2 Analyse the problem scientifically and arrive at workable solutions 60%
CO3 Think innovatively and develop relevant components, products, processes or technologies 60%
CO4 Organize and execute work in a team 60%
Document and present ones own work for a given target group, with strict requirements on structure
CO5 60%
and format
CO6 Identify the need to further enhance knowledge and lifelong learning 60%
To what extent you are able to apply the

relevant knowledge and skills, which are
acquired within the technical area to solve a
given problem
CO1
Answer Choice- Very high degree/High
Degree/Moderate degree/Small Degree/Not at
all
AJCE 239
CHE
To what extent you are able to analyse the

problem scientifically and arrive at workable
solutions
CO2
all
To what extent you are able to think

innovatively and develop relevant components,
products, processes or technologies
CO3
all
To what extent you are able to organize and

execute work in a team
CO4
all
To what extent are you able to

identify the need to further
CO5
enhance knowledge and lifelong
learning
CO6
Answer Choice- Very high
degree/High
Degree/Moderate
degree/Small Degree/Not at
all
CO1 3 3 2 2 1
CO2 3 3 3 3 1
CO3 2 2 3 3 2
CO4 1 2 3 3 1 3
CO5 2 2 3 1 1
CO6 2 3
CO1
CO2
CO3
AJCE 240
CHE
CO4
CO5
CO6
CH010807/PO
3 3 3 3 2 1 2 3 3 3 3
PSO1 PSO2 PSO3

CH010807/PSO
CH010804L02
CH010804L02 Water and Waste water Engineering 0-0-0:0 2014
No. Course Outcome - CH010804L02 - Water and Waste water Engineering Target
CO1 Explain the important characteristics, analysis techniques and standards for water and wastewater 60%
CO2 Identify different treatment systems and plants for water and wastewater 60%
CO3 Identify the various techniques for waste water treatment based on the nature of pollutants 60%
CO4 Design systems for industrial waste water treatment 60%
CO5 Analyze the operation, trouble shooting and maintenance of treatment plant operations 60%
COURSE END SURVEY - CH010804L02 - Water and Waste water Engineering
How well can you Explain the important characteristics, analysis techniques and standards for water and
wastewater
CO1
How well can you identify different treatment systems and plants for water and wastewater
CO2
How well can you identify the various techniques for waste water treatment based on the nature of pollutants
CO3
How well can you design systems for industrial waste water treatment
CO4 Answer Choice- Very advanced/Advanced/Proficient/Basic/ Minimal
AJCE 241
CHE
How well can you analyze the operation, trouble shooting and maintenance of treatment plant operations
CO5
CO->PO MAPPING - CH010804L02 - Water and Waste water Engineering
CO1 1 1 3 3 1 2
CO2 1 1 3 1 1 2
CO3 1 1 3 1 1 3
CO4 2 2 3 1 1 3
CO5 2 3 3 1 1 2 2
CO->PSO MAPPING - CH010804L02 - Water and Waste water Engineering
CO1 1 2 1
CO2 1 1
CO3 1 1
CO4 3 1
CO5 1 1
COURSE->PO MAPPING - CH010804L02 - Water and Waste water Engineering
CH010804L02/PO
2 3 3 3 1 2 3
COURSE->PSO MAPPING - CH010804L02 - Water and Waste water Engineering
PSO1 PSO2 PSO3

CH010804L02/PSO
3 2 1
CH010806
CH010806 Chemical Reaction Engineering and Process Control Lab 0-0-0:0 2014
No. Course Outcome - CH010806 - Chemical Reaction Engineering and Process Control Lab Target
CO1 Analyze experimental data to obtain the reaction rate law expressions 65%
CO2 Determine the kinetics of chemical reactions using steady state reactors 65%
CO3 Design experiments to acquire the data pertaining to kinetics and residence time distribution 65%
AJCE 242
CHE
CO4 Analyze the characteristics of control valves 65%
CO5 Determine the step response of first and second order systems 65%
COURSE END SURVEY - CH010806 - Chemical Reaction Engineering and Process Control Lab
What is your ability in the determination of rate law expressions

CO1
What is your knowledge in kinetics determination using steady state reactors

CO2
Rate your ability in determining the kinetics and residence time distribution
CO3
What is your ability in analyzing the characteristics of control valve

CO4
What is your level of ability in the determination of step response of first and second order systems
CO5
CO->PO MAPPING - CH010806 - Chemical Reaction Engineering and Process Control Lab
CO1 3 3 2 1 1 2 1
CO2 3 3 2 2 1 2 1
CO3 3 3 2 1 1 2 1
CO4 3 3 2 1 1 2 1
CO5 3 3 2 1 1 2 1
CO->PSO MAPPING - CH010806 - Chemical Reaction Engineering and Process Control Lab
CO1
CO2
CO3
CO4
CO5
COURSE->PO MAPPING - CH010806 - Chemical Reaction Engineering and Process Control Lab
AJCE 243
CHE
CH010806/PO
3 3 2 2 1 2 1
COURSE->PSO MAPPING - CH010806 - Chemical Reaction Engineering and Process Control Lab
PSO1 PSO2 PSO3

CH010806/PSO
CH468
CH468 Food Processing and Technology 3-0-0:3 2016
No. Course Outcome - CH468 - Food Processing and Technology Target
Understand the general aspects of Global and Indian food industry and classify food constituents,
CO1 61%
additives and their deteriorative factors.
CO2 Analyze food conversion operations and food quality control. 61%
Categorize various food preservation methods such as hot and cold, irradiation, microwave,
CO3 61%
fermentation and pickling.
CO4 Describe the production and processing of cereals, pulses, vegetables, spices, fats and oils. 61%
CO5 Analyze processing methods in dairy, meat, poultry and fish industry. 61%
CO6 Classify beverage industry and understand the treatment and disposal of food processing wastes. 61%
COURSE END SURVEY - CH468 - Food Processing and Technology
To what extent were you able to understand general aspects of Global and Indian food industry and
classification of food constituents, additives and their deteriorative factors?
CO1
How far were you able to analyze food conversion operations and food quality control?
CO2
To what extent were you able to categorize various food preservation methods such as hot & cold,
irradiation, microwave, fermentation and pickling?
CO3
How far were you able to describe the production and processing of cereals, pulses, vegetables, spices, fats
and oils?
CO4
How far were you able to analyze the processing methods in dairy, meat, poultry and fish industry?
CO5 Answer Choice- Excellent/Very Good/Good/Fair/Poor
AJCE 244
CHE
To what extent were you able to classify beverage industry and understand the treatment and disposal of
food processing wastes?
CO6
CO->PO MAPPING - CH468 - Food Processing and Technology
CO1 2 1
CO2 3 1 1
CO3 3 1 1
CO4 3 1 1
CO5 3 1 1
CO6 3 1 1 1 2 1
CO->PSO MAPPING - CH468 - Food Processing and Technology
CO1 1
CO2 2 1
CO3 2 1
CO4 2 1
CO5 2 1
CO6 2 1 1
COURSE->PO MAPPING - CH468 - Food Processing and Technology
CH468/PO
3 1 1 1 1 2 1
COURSE->PSO MAPPING - CH468 - Food Processing and Technology
PSO1 PSO2 PSO3

CH468/PSO
2 1 1
CH492
CH492 Project 0-0-9:6 2016
No. Course Outcome - CH492 - Project Target
AJCE 245
CHE
demonstrate proficiency in collecting and processing real-world data, in designing the best methods
CO1 to solve the problem, in implementing a solution, and quantifying the robustness and accuracy of 68%
their model
demonstrate competence in presenting material by delivering two presentations: a proposal on how

CO2 68%
to approach the problem and their final solution
CO3 learn how to work in small teams with at least one other student on their project 68%
will write a report on their project for evaluation by the instructor(s) in consultation with the project
CO4 68%
advisors
to apply knowledge of chemical engineering to design or to research on chemical and related

CO5 68%
processes and to determine his/her proficiency level of the subjects learnt in the entire course
How far you were able to combine the scientiifc principles and engineering concepts to formulate models of a
system or a process that is appropriate in terms of applicability and required accuracy?
CO1
To what extent you where able to demonstrate the ability to formulate a solution plan and methadology for
your project?
CO2
To what extent were you able to demostrate the ability to form a team and define a role for each member?
CO3
To what extent the were you able to create engineering standard figues ,reports and drawing to complement
writing and presentations
CO4
How far you were able to formulate a solution plan and methadology for an engineering problem by applying
the knowledge of Chemical Engineering pronciples throughout the entire course
CO5
CO1 2 3 3 1 3 1 1 1 3 1 1
CO2 3 1 1 1 3 3 1
CO3 3 1 1 1 3 3 1
CO4 3 1 1 1 3 3 1 1
CO5 3 2 2 1 3 3 2 3 2 3 2 2
AJCE 246
CHE
CO1 1 2 3
CO2 3
CO3 3
CO4 1 2
CO5 3 2 3
CH492/PO
3 3 3 1 3 3 2 3 3 3 2 2
PSO1 PSO2 PSO3

CH492/PSO
3 2 3
CH466
CH466 Composite Materials 3-0-0:3 2016
COURSE END SURVEY - CH466 - Composite Materials

CO->PO MAPPING - CH466 - Composite Materials
CO->PSO MAPPING - CH466 - Composite Materials
COURSE->PO MAPPING - CH466 - Composite Materials
CH466/PO
COURSE->PSO MAPPING - CH466 - Composite Materials
PSO1 PSO2 PSO3

CH466/PSO
CH482
CH482 Process utilities and pipe line design 3-0-0:3 2016
AJCE 247
CHE
No. Course Outcome - CH482 - Process utilities and pipe line design Target
CO1 Evaluate flow diagrams and piping installations 60%
CO2 Compare various pumps and valves 60%
CO3 Select water treatment methods for various utilities in industries 60%
CO4 Illustrate steam generation and its applications in chemical processes 60%
CO5 Assess the application of compressors and Vacuum Pumps in process industries 60%
CO6 Describe industrial heating, chilling and nitrogen systems 60%
COURSE END SURVEY - CH482 - Process utilities and pipe line design
To what extend you are able to evaluate flow diagrams and piping installation?
CO1
To what extend you are able to Compare various pumps and valves
CO2
How well are you able to Select water treatment methods for various utilities in industries
CO3
To what extend you are able to Illustrate steam generation and its applications in chemical processes
CO4
To what extend you are able to Assess the application of compressors and Vacuum Pumps in process
CO5 industries
To what extend you are able to Describe industrial heating, chilling and nitrogen systems
CO6
CO->PO MAPPING - CH482 - Process utilities and pipe line design
CO1 2 1 1 1
CO2 3 1 1 1
CO3 2 2 1 1 1
CO4 2 1 1 1 1 1 1
CO5 3 1 1 1
CO6 3 2 2 1 1 1 1
AJCE 248
CHE
CO->PSO MAPPING - CH482 - Process utilities and pipe line design
CO1 1
CO2 3
CO3 2 1
CO4 2 1
CO5 3
CO6 3 2
COURSE->PO MAPPING - CH482 - Process utilities and pipe line design
CH482/PO
3 2 2 1 1 1 1
COURSE->PSO MAPPING - CH482 - Process utilities and pipe line design
PSO1 PSO2 PSO3

CH482/PSO
3 2
CH404
CH404 Safety Engineering of Process Plants 3-0-0:3 2016
No. Course Outcome - CH404 - Safety Engineering of Process Plants Target
CO1 Impart the basic concepts of safety in Process Engineering 66%
CO2 Develop an understanding about safety practices in industries and emergency procedures 66%
CO3 Identify and apply mangerial principles in the chemical process industries 66%
Recognize safety standards and professional codes of conduct for engineers by audit and analysis
CO4 66%
studies
CO5 Apply engineering fundamentals on fire safety by fire extinguisher and fire proofing 66%
Incorporate inherent safety, awareness about government agencies, regulatory bodies, codes, and
CO6 66%
standards that govern the global, societal, and environmental impact
COURSE END SURVEY - CH404 - Safety Engineering of Process Plants
How well do you understand the basic concepts of safety in Process Engineering
CO1
AJCE 249
CHE
To what extent you have understood about safety practices in industries and emergency procedures
CO2
To what extent can you identify and apply mangerial principles in the chemical process industries
CO3
To what extent can you recognize safety standards and professional codes of conduct
CO4
How well can you apply engineering fundamentals on fire safety by fire extinguisher and fire proofing
CO5
How well can you incorporate inherent safety, awareness about government agencies, regulatory bodies,
codes, and standards that govern the global, societal, and environmental impact
CO6
CO->PO MAPPING - CH404 - Safety Engineering of Process Plants
CO1 3 3 1 2 1
CO2 1 2 1 1 2 1
CO3 1 2 1 1 2 2 1
CO4 1 3 1 3 1 2 3 1
CO5 2 1 1 1 3 2 1 2 1
CO6 1 3 2 3 1 2 2 1
CO->PSO MAPPING - CH404 - Safety Engineering of Process Plants
CO1 2
CO2 3
CO3 3
CO4 2
CO5 2 1 1
CO6 3
COURSE->PO MAPPING - CH404 - Safety Engineering of Process Plants
CH404/PO
2 1 1 3 3 3 1 2 3 1
AJCE 250
CHE
COURSE->PSO MAPPING - CH404 - Safety Engineering of Process Plants
PSO1 PSO2 PSO3

CH404/PSO
2 1 3
CH402
CH402 Project Engineering and Process Plant Economics 3-0-0:3 2016
No. Course Outcome - CH402 - Project Engineering and Process Plant Economics Target
CO1 Explain scope and role of a project Engineer and classify projects 61.5%
Define planning and scheduling of projects and study the different office procedures related to
CO2 61.5%
projects
CO3 elaborate the scope and different standards used in piping design 61.5%
CO4 explain different tools in the plant economic studies and to determine the depreciation techniques 61.5%
CO5 Explain different types of cost indices and comparison techniques used 61.5%
elaborate the different mathematical methods used for profitability evaluation and explain the
CO6 61.5%
variable cost and fixed cost related to plant economics
COURSE END SURVEY - CH402 - Project Engineering and Process Plant Economics
How far you are able to explain the role of a project engineer and to clasify projects?
CO1
how far are you able to answer the office procedures relating to project?
CO2
how far are you able to explain the scope piping engineering
CO3
to what extent are you able to understand depreciation and plant economics?
CO4
how far are you able to explain the cost indices methods and principles of accounting
CO5
how far are you able to explain profitability analysis , variable and fixed cost analysis
CO6
CO->PO MAPPING - CH402 - Project Engineering and Process Plant Economics
AJCE 251
CHE
CO1 1 3 1 3
CO2 2 2 3
CO3 1 1 1
CO4 1 2 3 3
CO5 2 3
CO6 2 3
CO->PSO MAPPING - CH402 - Project Engineering and Process Plant Economics
CO1 1
CO2 1
CO3 2 1 1
CO4 1 2
CO5 1 2
CO6 1 2
COURSE->PO MAPPING - CH402 - Project Engineering and Process Plant Economics
CH402/PO
1 1 1 2 3 2 1 3
COURSE->PSO MAPPING - CH402 - Project Engineering and Process Plant Economics
PSO1 PSO2 PSO3

CH402/PSO
2 1 2
CH464
CH464 Water and Waste water Engineering 3-0-0:3 2016
No. Course Outcome - CH464 - Water and Waste water Engineering Target
CO1 Analyze the physical, chemical as well as biological characteristics of water. 60.5%
Interpret water quality data to assess its sustainable use in potable or recycled water supply
CO2 60.5%
systems.
CO3 Analyze the wastewater flow, characteristics and treatment component. 60.5%
AJCE 252
CHE
CO4 Select appropriate treatment schemes to remove the pollutants present in water or wastewater. 60.5%
CO5 Investigate the sludge treatment and its disposal. 60.5%
CO6 Analyze the treatment schemes for different industries. 60.5%
COURSE END SURVEY - CH464 - Water and Waste water Engineering
To what extent you are ale to analyze the physical, chemical as well as biological characteristics of water.
CO1
What is your ability to interpret water quality data to assess its sustainable use in potable or recycled water
supply systems.
CO2
To what extent you are able to analyze the wastewater flow, characteristics and treatment component.
CO3
To what extent you are able to select appropriate treatment schemes to remove the pollutants present in
water or wastewater.
CO4
To what extent you are able to investigate the sludge treatment and its disposal.
CO5
To what extent you are able to analyze the treatment schemes for different industries.
CO6
CO->PO MAPPING - CH464 - Water and Waste water Engineering
CO1 3 1 1
CO2 2 2 2 1 1 1 1
CO3 3 1 1 1 1
CO4 3 3 2 1 1 1 1 1 1 1 1 1
CO5 2 1 1 1 2 2 1 1 1 1 1
CO6 2 1 1 1 1 1 1 1 1 1
CO->PSO MAPPING - CH464 - Water and Waste water Engineering
CO1 2 1 1
CO2 2 1 1
AJCE 253
CHE
CO3 2 1
CO4 3 2 1
CO5 2 1 1
CO6 1 1
COURSE->PO MAPPING - CH464 - Water and Waste water Engineering
CH464/PO
3 3 2 1 1 2 2 1 1 1 1 1
COURSE->PSO MAPPING - CH464 - Water and Waste water Engineering
PSO1 PSO2 PSO3

CH464/PSO
3 2 1
CH484
CH484 Fuel cell technology 3-0-0:3 2016
COURSE END SURVEY - CH484 - Fuel cell technology

CO->PO MAPPING - CH484 - Fuel cell technology
CO->PSO MAPPING - CH484 - Fuel cell technology
COURSE->PO MAPPING - CH484 - Fuel cell technology
CH484/PO
COURSE->PSO MAPPING - CH484 - Fuel cell technology
PSO1 PSO2 PSO3

CH484/PSO
CH472
CH472 Process Integration 3-0-0:3 2016
COURSE END SURVEY - CH472 - Process Integration

CO->PO MAPPING - CH472 - Process Integration
AJCE 254
CHE
CO->PSO MAPPING - CH472 - Process Integration
COURSE->PO MAPPING - CH472 - Process Integration
CH472/PO
COURSE->PSO MAPPING - CH472 - Process Integration
PSO1 PSO2 PSO3

CH472/PSO
SEMESTER-1
MNT107
MNT107 Seminar 0-0-4:4 2010
COURSE END SURVEY - MNT107 - Seminar

CO->PO MAPPING - MNT107 - Seminar
CO->PSO MAPPING - MNT107 - Seminar
COURSE->PO MAPPING - MNT107 - Seminar
MNT107/PO
COURSE->PSO MAPPING - MNT107 - Seminar
PSO1 PSO2 PSO3

MNT107/PSO
04CH6103
04CH6103 Introduction to Nanotechnology 3-1-0:4 2016
No. Course Outcome - 04CH6103 - Introduction to Nanotechnology Target
Describe the history of nanotechnology and illustrate fundamental concepts of confinement and
CO1 55%
nanosythesis
Explain the concepts of tunneling, inter-molecular forces, various structures and surface
CO2 55%
phenomenons in nanoscale.
AJCE 255
CHE
CO3 Explain Moore's laws and various nano-fabrication techniques 55%
CO4 Compare various lithographic techniques for manufacturing nanoscale structures 55%
CO5 Describe the physical methods and chemical methods for synthesis of nanomaterials. 55%
CO6 Describe the physical methods for synthesis of nano materials 55%
COURSE END SURVEY - 04CH6103 - Introduction to Nanotechnology
To what extend you are able to Describe the

history of nanotechnology and illustrate
fundamental concepts of confinement and
CO1 nanosythesis
Answer Choice- Excellent/Very

Good/Good/Satisfactory/Poor
To what extend you are able to Explain the

concepts of tunneling, inter-molecular forces,
various structures and surface phenomenons
CO2 in nanoscale.

To what extend you are able to

Compare various lithographic
CO3
techniques for manufacturing
nanoscale structures
CO4
Answer Choice-
Excellent/Very

chemical methods for synthesis of
nanomaterials.
CO5

physical methods for synthesis of nano
CO6 materials

CO->PO MAPPING - 04CH6103 - Introduction to Nanotechnology
CO1 2 1 2 1
CO2 1 1 1 1 2 1
CO3 1 1 1 1 1
AJCE 256
CHE
CO4 1 2 1 2 1
CO5 1 3 2 1
CO6 1 3 2 1
CO->PSO MAPPING - 04CH6103 - Introduction to Nanotechnology
CO1 1 1
CO2 1 1
CO3 1 1
CO4 2 1
CO5 3 2
CO6 3 2
COURSE->PO MAPPING - 04CH6103 - Introduction to Nanotechnology
04CH6103/PO
2 3 1 1 2 1 1 1
COURSE->PSO MAPPING - 04CH6103 - Introduction to Nanotechnology
PSO1 PSO2 PSO3

04CH6103/PSO
3 2 1
04CH6107
04CH6107 Engineering Principles for Nanotechnology 3-0-0:4 2016
No. Course Outcome - 04CH6107 - Engineering Principles for Nanotechnology Target
To acquaint with fundamental aspects of advanced vacuum technology and its applications in nano-
CO1 61%
forming
CO2 To demonstarte the role of vaporization in microminiaturization of silicon circuits 61%
To understand the fundamentals of semiconductor functioning in order to further nano-scale

CO3 transistor integration 61%
CO4 To evaluate the various nano-lithographic techniques for appropriate nano-fabrication needs 61%
To understand the change in material charatecteristics and behaviour when made into thin films,
CO5 61%
corresponding evolution of Micro-Electro-Mechanical Systems
AJCE 257
CHE
To demonstrate the applications of Nanoelectromechanical systems (NEMS) devices in various

CO6 61%
fields like molecular electronics, micro-fluidics, etc.
COURSE END SURVEY - 04CH6107 - Engineering Principles for Nanotechnology
How well are you acquainted with fundamental aspects of advanced vacuum technology and its applications
in nano-forming?
CO1
How well can you demonstarte the role of vaporization in microminiaturization of silicon circuits?
CO2
How well do you understand the fundamentals of semiconductor functioning in order to further nano-scale
transistor integration?
CO3
To what extent can you evaluate the various nano-lithographic techniques for appropriate nano-fabrication
needs.
CO4
How well do you understand the change in material charatecteristics and behaviour when made into thin
films, corresponding evolution of Micro-Electro-Mechanical Systems?
CO5
To what extent can you demonstrate the applications of Nanoelectromechanical systems (NEMS) devices in
various fields like molecular electronics, micro-fluidics, etc.
CO6
CO->PO MAPPING - 04CH6107 - Engineering Principles for Nanotechnology
CO1 3 3 3 2 3 3 2 2 2 2 2 1
CO2 3 3 2 1 3 3 2 1 2 2 1 2
CO3 3 3 2 2 2 3 2 1 2 2 1 3
CO4 3 3 3 3 3 3 2 1 2 2 1 2
CO5 3 3 3 3 2 3 3 1 3 2 1 2
CO6 3 3 3 3 3 3 3 2 2 2 2 3
CO->PSO MAPPING - 04CH6107 - Engineering Principles for Nanotechnology
CO1 2 3 1
CO2 3 2 1
AJCE 258
CHE
CO3 3 3 2
CO4 2 3 2
CO5 3 3 1
CO6 3 3 2
COURSE->PO MAPPING - 04CH6107 - Engineering Principles for Nanotechnology
04CH6107/PO
3 3 3 3 3 3 3 2 3 2 2 3
COURSE->PSO MAPPING - 04CH6107 - Engineering Principles for Nanotechnology
PSO1 PSO2 PSO3

04CH6107/PSO
3 3 2
04GN6001
04GN6001 Research Methodology 0-2-0:2 2016
No. Course Outcome - 04GN6001 - Research Methodology Target
CO1 To get introduced to research philosophy and processes in general. 60%
CO2 To formulate the research problem and prepare research plan 60%
CO3 Got the basic idea of IPR, copyright and patent for the social development 60%
CO4 To apply various numerical /quantitative techniques for data analysis 60%
CO5 To prepare and communicate the research findings effectively with modern tool 60%
COURSE END SURVEY - 04GN6001 - Research Methodology
to what extent you understand what is research means and its types
CO1
At what confidence level you are able to formulate and prepare research problem and plan
CO2
what level you understand the importance of IPR Copy right and patent
CO3
at what extent you apply various numerical /quantitative techniques for data analysis
AJCE 259
CHE
CO4
how much you are capable of preparing and communicate the research findings effectively with modern tool
CO5
CO->PO MAPPING - 04GN6001 - Research Methodology
CO1 1 2
CO2 2
CO3 2
CO4 3 3 3
CO5 3
CO->PSO MAPPING - 04GN6001 - Research Methodology
CO1 2
CO2
CO3
CO4 2
CO5
COURSE->PO MAPPING - 04GN6001 - Research Methodology
04GN6001/PO
2 3 3 3 3
COURSE->PSO MAPPING - 04GN6001 - Research Methodology
PSO1 PSO2 PSO3

04GN6001/PSO
2 2
04CH6101
04CH6101 MATHEMATICAL METHODS FOR NANOTECHNOLOGY 3-1-0:4 2016
No. Course Outcome - 04CH6101 - MATHEMATICAL METHODS FOR NANOTECHNOLOGY Target
CO1 Demonstrate the use of Linear transformations and vector spaces. 60%
CO2 Demonstrate the use of Matrix of transformations and Inner product spaces. 60%
AJCE 260
CHE
Illustrate the use of power series for solving and studying the solutions of partial differential
CO3 60%
equations
CO4 Classify, formulate and solve partial differential equations 60%
CO5 Demonstrate the method of series solution of ordinary differential equations 60%
CO6 Demonstrate the tensor representations for vector algebra 60%
COURSE END SURVEY - 04CH6101 - MATHEMATICAL METHODS FOR NANOTECHNOLOGY
To what extend you are able to demonstrate the use of Linear transformations and vector spaces
CO1
To what extend you are able to demonstrate the use of Matrix of transformations and Inner product spaces.
CO2
To what extend you are able to illustrate the use of power series for solving and studying the solutions of
partial differential equations
CO3
To what extend you are able to classify, formulate and solve partial differential equations
CO4
To what extend you are able to demonstrate the method of series solution of ordinary differential equations
CO5
To what extend you are able to demonstrate the tensor representations for vector algebra
CO6
CO->PO MAPPING - 04CH6101 - MATHEMATICAL METHODS FOR NANOTECHNOLOGY
CO1 2 1 1 1
CO2 2 1 1 1
CO3 2 1 1 1
CO4 2 1 1 1
CO5 2 1 1 1
CO6 2 1 1 1
CO->PSO MAPPING - 04CH6101 - MATHEMATICAL METHODS FOR NANOTECHNOLOGY
CO1 2 1
AJCE 261
CHE
CO2 2 1
CO3 2 1
CO4 2 1
CO5 2 1
CO6 2 1
COURSE->PO MAPPING - 04CH6101 - MATHEMATICAL METHODS FOR NANOTECHNOLOGY
04CH6101/PO
2 1 1 1
COURSE->PSO MAPPING - 04CH6101 - MATHEMATICAL METHODS FOR NANOTECHNOLOGY
PSO1 PSO2 PSO3

04CH6101/PSO
2 1
04CH6105
04CH6105 PHYSICS OF MATERIALS 3-0-0:4 2016
No. Course Outcome - 04CH6105 - PHYSICS OF MATERIALS Target
CO1 Demonstrate the basic principles of Quantum mechanics and interpret them. 60%
Develop time independent Schrodinger equation and apply it to motion of free and confined
CO2 60%
particles.
Demonstrate quantum confinement in nanostructures and illustrate the working of devices based on
CO3 60%
it.
Explain the synthesis, properties and applications of selected inorganic nanomaterials and
CO4 60%
structures
Illustrate the synthesis, properties and applications of selected organic nanomaterials and
CO5 60%
nanomaterials for molecular electronics and optoelectronics
CO6 Identify the structure and properties of localized particles and excitons 60%
COURSE END SURVEY - 04CH6105 - PHYSICS OF MATERIALS
To what extend you are able to demonstrate the basic principles of Quantum mechanics and interpret them?
CO1
Are you able to develop time independent Schrodinger equation and apply it to the motion of free and
confined particles?
CO2
AJCE 262
CHE
Can you demonstrate quantum confinement in nanostructures and illustrate the working of devices based on
it?
CO3
Can you explain the synthesis, properties and applications of selected inorganic nanomaterials and
structures?
CO4
How far you are able to illustrate the synthesis, properties and applications of selected organic
nanomaterials and nanomaterials for molecular electronics and optoelectronics?
CO5
To what extent you are able to identify the structure and properties of localized particles and excitons?
CO6
CO->PO MAPPING - 04CH6105 - PHYSICS OF MATERIALS
CO1 1 2 1 2 2 2 1 1 2 2
CO2 1 1 1 2 1 2 1
CO3 1 1 2 2 1 2 1 1 2 1
CO4 3 3 3 3 3 3 2 1 2 2 1 2
CO5 3 3 3 3 3 3 2 1 2 2 1 2
CO6 1 1 1 1 1 2 1
CO->PSO MAPPING - 04CH6105 - PHYSICS OF MATERIALS
CO1 1 3 1
CO2 1 2
CO3 2 3 1
CO4 2 3 2
CO5 2 3 1
CO6 1 2 1
COURSE->PO MAPPING - 04CH6105 - PHYSICS OF MATERIALS
04CH6105/PO
3 3 3 3 3 3 2 1 2 2 1 2
COURSE->PSO MAPPING - 04CH6105 - PHYSICS OF MATERIALS
AJCE 263
CHE
PSO1 PSO2 PSO3

04CH6105/PSO
2 3 2
04CH6111
04CH6111 Carbon Nanomaterial Science and Technology 3-0-0:3 2016
No. Course Outcome - 04CH6111 - Carbon Nanomaterial Science and Technology Target
CO1 Ability to distinguish the structure, methods of preparation and properties of carbon nanotubes 60%
Gain the knowledge of significant applications of carbon nanotubes in various fields to develop new
CO2 60%
devices and materials
Apply the principles of spectroscopy to address the optical and photoluminescence performance of
CO3 60%
carbon nanotubes
Interpret the magnetic and photoconductive properties of carbon nanotubes for their vibrant utility in
CO4 60%
electronics
CO5 Demonstrate the electrical transport and electroluminescence behavior of carbon nanotubes 60%
CO6 Explore the potential applications of inorganic nanotubes, fullerenes and graphene in 60%
nanotechnology and chemical areas
COURSE END SURVEY - 04CH6111 - Carbon Nanomaterial Science and Technology
To what extent you are able to distinguish the structure, methods of preparation and properties of carbon
nanotubes
CO1
To what extent you are able to gain the knowledge of significant applications of carbon nanotubes in various
fields to develop new devices and materials
CO2
How well you are able to apply the principles of spectroscopy to address the optical and photoluminescence
performance of carbon nanotubes
CO3
ITo what extent you are able to nterpret the magnetic and photoconductive properties of carbon nanotubes
for their vibrant utility in electronics
CO4
To what extent you are able to demonstrate the electrical transport and electroluminescence behavior of
carbon nanotubes
CO5
AJCE 264
CHE
To what extent you are able to explore the potential applications of inorganic nanotubes, fullerenes and
graphene in nanotechnology and chemical areas
CO6
CO->PO MAPPING - 04CH6111 - Carbon Nanomaterial Science and Technology
CO1 3 3 2 1 2 2 1
CO2 2 1 1 1 1 2 1 1
CO3 3
CO4 2 1 2 3
CO5 1 1 2
CO6 2 2 1 1 1 1
CO->PSO MAPPING - 04CH6111 - Carbon Nanomaterial Science and Technology
CO1 1 1
CO2 2 2
CO3 1 1
CO4 2 1
CO5 2 1
CO6 2 1
COURSE->PO MAPPING - 04CH6111 - Carbon Nanomaterial Science and Technology
04CH6111/PO
3 3 3 1 1 3 2 1 1 1
COURSE->PSO MAPPING - 04CH6111 - Carbon Nanomaterial Science and Technology
PSO1 PSO2 PSO3

04CH6111/PSO
2 2
04CH6191
04CH6191 Seminar 0-0-2:2 2016
No. Course Outcome - 04CH6191 - Seminar Target
AJCE 265
CHE
CO1 Ability to effectively gather and interpret information from literature survey 65%
Ability to use knowledge gathered through literature survey to identify, formulate, analyze and solve
CO2 65%
complex problems and to evaluate and interpret various solutions
CO3 Gain the ability to communicate effectively with written, oral, and visual means in a technical setting. 65%
CO4 Ability to cultivate the critically analyzing the recent technological advancement in the seminar report 65%
CO5 Students will be able to present a technical topic systematically 65%
Complete an independent seminar report, resulting in at least a publication as a review in UGC

CO6 65%
approved journals and conference proceedings.
COURSE END SURVEY - 04CH6191 - Seminar
Are you able to effectively gather and interpret information from literature survey ?
CO1
To what extend you use this literature survey knowledge to identify, formulate, analyse and solve complex
problems and to interpret various results ?
CO2
To what extend you improved your communications skills after evaluation

CO3
Are u able to analyze critically the recent technological advancement in the area of Seminar
CO4
Are you able to present a technical topic systematically

CO5
Are u able to complete an independent seminar report with a posiibility of a publication

CO6
CO->PO MAPPING - 04CH6191 - Seminar
CO1 2 1 1 1 1 1 1 1 3 1 1
CO2 3 2 1 1 1 1 1 1 3 1 1
CO3 2 1 1 1 1 1 1 3 1 1
CO4 2 1 1 1 1 1 3 1 2
CO5 3 1 1 1 1 1 3 1 2
CO6 3 1 1 1 1 1 1 3 1 3
CO->PSO MAPPING - 04CH6191 - Seminar
AJCE 266
CHE
CO1 2 2 1
CO2 1 2 1
CO3 2 2 2
CO4 2 2 1
CO5 2 2 3
CO6 2 2 3
COURSE->PO MAPPING - 04CH6191 - Seminar
04CH6191/PO
3 2 1 1 1 1 1 1 1 3 1 3
COURSE->PSO MAPPING - 04CH6191 - Seminar
PSO1 PSO2 PSO3

04CH6191/PSO
2 2 3
04CH6193
04CH6193 LAB I 0-0-2:1 2016
No. Course Outcome - 04CH6193 - LAB I Target
CO1 Synthesize nanomaterials via chemical methods 62%
CO2 Synthesize nanomaterials via physical methods 62%
CO3 Operate characterization equipments like UV-Vis Spectroscopy 62%
CO4 Synthesize of nanomaterial via sono-chemical method 62%
CO5 Analyze the applications of nanomaterials 62%
COURSE END SURVEY - 04CH6193 - LAB I
How well have you learned to Synthesize nanomaterials via chemical methods
CO1
How well have you learned to Synthesize nanomaterials via physical methods
CO2 Answer Choice- Very high degree/High Degree/Moderate degree/Small Degree/Not at all
AJCE 267
CHE
How well are you able to perate characterization equipments like UV-Vis Spectroscopy
CO3
How well have you learned to synthesize nanomaterial via sono-chemical method
CO4
How well have you learned to Analyze the applications of nanomaterials

CO5
CO->PO MAPPING - 04CH6193 - LAB I
CO1 3 1 2
CO2 3 1 2
CO3 3 2
CO4 3 1
CO5 2 3 1
CO->PSO MAPPING - 04CH6193 - LAB I
CO1
CO2
CO3
CO4
CO5
COURSE->PO MAPPING - 04CH6193 - LAB I
04CH6193/PO
3 3 1 2 3 1
COURSE->PSO MAPPING - 04CH6193 - LAB I
PSO1 PSO2 PSO3

04CH6193/PSO
04CH6109
04CH6109 Nano Chemistry 3-0-0:3 2016
AJCE 268
CHE
No. Course Outcome - 04CH6109 - Nano Chemistry Target
CO1 To impart an awareness about the size effects on structure and properties of nanomaterials 60%
CO2 To disseminate the knowlege of nanoparticle morphology and superplastic nanostructured materials 60%
To transmit the knowledge of size effects on various properties of nanoparticles and its role in
CO3 60%
chemisorption, alloying effects and electronic effects
CO4 To pass on the knowledge on catalysis using nanoparticles 60%
CO5 To relay on supramolecular chemistry and supercritical fluids 60%
CO6 To familiarise with nanoscale growth and thermodynamics of growth 60%
COURSE END SURVEY - 04CH6109 - Nano Chemistry
To what extent the discussion will impart an awarness about the size effects on structure and properties of
nanomaterials
CO1
To what extent the dissemination of knowledge about nanoparticle morphology and superplastic
nanostructured materials will takes place
CO2
How much the transmission of knowledge about the perforamnce of nanoparticles in chemisorption, alloying
effects and electronic effects will take place ?
CO3
How much knowledge will acquire based on nanoparticle catalysis

CO4
To what extent the knowledge on supramolecular chemistry and supercrtical fluids will acquire ?
CO5
To What extent transmission of knowledge on nanoscale growth and its thermodynamics will take place ?
CO6
CO->PO MAPPING - 04CH6109 - Nano Chemistry
CO1 3 3 3 1 2 3 1 1 1 1 1 1
CO2 3 3 3 1 2 3 1 1 1 1 1 1
CO3 3 3 2 1 2 2 1 1 1 1 1 1
CO4 2 2 1 1 2 3 1 1 1 1 1 1
CO5 1 2 1 1 2 3 1 1 1 1 1 1
AJCE 269
CHE
CO6 2 2 1 1 2 2 1 1 1 1 1 1
CO->PSO MAPPING - 04CH6109 - Nano Chemistry
CO1 2 2 1
CO2 2 2 1
CO3 2 2 1
CO4 2 2 1
CO5 2 2 1
CO6 2 2 1
COURSE->PO MAPPING - 04CH6109 - Nano Chemistry
04CH6109/PO
3 3 3 1 2 3 1 1 1 1 1 1
COURSE->PSO MAPPING - 04CH6109 - Nano Chemistry
PSO1 PSO2 PSO3

04CH6109/PSO
2 2 1
SEMESTER-2
04CH6102
04CH6102 INDUSTRIAL NANOTECHNOLOGY 3-1-0:4 2016
No. Course Outcome - 04CH6102 - INDUSTRIAL NANOTECHNOLOGY Target
CO1 Illustrate the concept of nano electronic devices and its operating systems 75%
CO2 Fuel cells processes and nanoparticle coating phenomena for electrical products 75%
Self assembled nanoreactors, Nanostructures for molecular recognition like quantum dots,nanorods
CO3 75%
and nanotubes
CO4 Implementation of nanotechnology in agriculture and food industry sectors 75%
CO5 General nanofibre production,nano finishing in textiles,modern textiles and in cosmetics 75%
COURSE END SURVEY - 04CH6102 - INDUSTRIAL NANOTECHNOLOGY
What is the level of your understanding about the concepts of nanoelectronic devices
AJCE 270
CHE
CO1
Are you able to understand the fuel cell processes and nanoparticle coating phenomena
CO2
What is your ability to assembled the nanoreactors and nanostructure for molecular recognition
CO3
What is the level of your knowledge in industrial sector nanotechnology

CO4
What is your range of potential in nanofibre production,nano in modern textiles and in cosmetics
CO5
CO->PO MAPPING - 04CH6102 - INDUSTRIAL NANOTECHNOLOGY
CO1 1 3 3 3
CO2 2 2 3 3 3
CO3 3 2 3 3 3
CO4 3 1 3
CO5 3 1
CO->PSO MAPPING - 04CH6102 - INDUSTRIAL NANOTECHNOLOGY
CO1 2 2
CO2 2 2
CO3 3 2
CO4 3
CO5 3 2
COURSE->PO MAPPING - 04CH6102 - INDUSTRIAL NANOTECHNOLOGY
04CH6102/PO
3 3 3 3 3
COURSE->PSO MAPPING - 04CH6102 - INDUSTRIAL NANOTECHNOLOGY
PSO1 PSO2 PSO3

04CH6102/PSO
3 2
04CH6104
AJCE 271
CHE
04CH6104 ADVANCED NANOMATERIALS 3-0-0:3 2016
No. Course Outcome - 04CH6104 - ADVANCED NANOMATERIALS Target
CO1 To Impart a knowledge of fundamental aspects of magnetic materials 60%
CO2 To create an awareness about the principles of magnetic behaviour in nanomaterials 60%
To apply the principles of nanotechnology for preparing specialized nano-materials as well as in

CO3 60%
agricultural applications
CO4 To Interpret the applications of nanotechnology in food industry 60%
CO5 To provide an exposure to the production of nanofibers and cosmetics 60%
To explore the applications of nanotechnology in textile industry by assimilating various effects such
CO6 60%
as shark skin effect, lotus effect etc.
COURSE END SURVEY - 04CH6104 - ADVANCED NANOMATERIALS
How far you are able to acquire the knowledge of magnetic materials
CO1
To what extent you can describe the magnetic behaviour in nanomaterials

CO2
How far you can illustrate the principles of nanotechnology for preparing nanomaterials and in agricultural
applications
CO3
To what extent you can interpret the applications of nanotechnology in food industry
CO4
How far you are able to assimilate and apply the concepts of production of nanofibers and cosmetics
CO5
To what extent you can find applications of nanotechnology in textile industry

CO6
CO->PO MAPPING - 04CH6104 - ADVANCED NANOMATERIALS
CO1 1 3 1 2 1
CO2 1 3 2 1 1 1 1 1
CO3 1 3 3 2 1 1 1 1 1 1
AJCE 272
CHE
CO4 2 1 1 1 1 2 3 2 1
CO5 1 2 2 2
CO6 2 2 3 1 1 1 1 1
CO->PSO MAPPING - 04CH6104 - ADVANCED NANOMATERIALS
CO1 1
CO2 1
CO3 3 1
CO4 1 2
CO5 1
CO6 3 2
COURSE->PO MAPPING - 04CH6104 - ADVANCED NANOMATERIALS
04CH6104/PO
2 3 3 2 2 2 2 3 2 1
COURSE->PSO MAPPING - 04CH6104 - ADVANCED NANOMATERIALS
PSO1 PSO2 PSO3

04CH6104/PSO
3 2
04CH6106
Course Year of
Course Name L-T-P:C
Code Introduction
Experimental And Characterization Techniques For

04CH6106 3-0-0:3 2016
Nanotechnology
No. Course Outcome - 04CH6106 - Experimental And Characterization Techniques For Nanotechnology Target
CO1 Describe the experimental methods generally applied for the characterization of nanomaterials. 60%
CO2 Explain factorial designs and methods used for error analysis. 60%
CO3 Describe the methods used to measure thermal conductivity of nanofluids. 60%
CO4 Explain the spectroscopic techniques used for the optical characterization of nanomaterials. 60%
Demonstrate the microscopic techniques used for the characterization of microstructure in

CO5 60%
nanomaterials.
CO6 Illustrate the use of neutron and X-ray diffraction for the structural characterization of nanomaterials. 60%
AJCE 273
CHE
COURSE END SURVEY - 04CH6106 - Experimental And Characterization Techniques For Nanotechnology
How far you can describe the experimental methods generally applied for the characterization of
nanomaterials?
CO1
How far you can explain factorial designs and methods used for error analysis?
CO2
How far can you describe the methods used to measure thermal conductivity of nanofluids?
CO3
How far can you explain the spectroscopic techniques used for the optical characterization of nanomaterials?
CO4
To what extent can you demonstrate the microscopic techniques used for the characterization of
microstructure in nanomaterials?
CO5
How far can you illustrate the use of neutron and X-ray diffraction for the structural characterization of
nanomaterials?
CO6
CO->PO MAPPING - 04CH6106 - Experimental And Characterization Techniques For Nanotechnology
CO1 2 3 3 3 3 3 2 2 1 2 2
CO2 1 1 2 3 3 2 1 2 2 1 1 2
CO3 1 1 3 3 3 2 1 1 1 2 2
CO4 3 3 3 2 3 3 2 1 1 2 1 3
CO5 3 3 3 3 2 3 2 2 2 1 2
CO6 3 2 3 3 3 3 1 1 2 1 1 2
CO->PSO MAPPING - 04CH6106 - Experimental And Characterization Techniques For Nanotechnology
CO1 3 3 2
CO2 1 1
CO3 2 3 1
CO4 3 3 2
CO5 3 3 2
AJCE 274
CHE
CO6 2 3 1
COURSE->PO MAPPING - 04CH6106 - Experimental And Characterization Techniques For Nanotechnology
04CH6106/PO
3 3 3 3 3 3 2 2 2 2 2 3
COURSE->PSO MAPPING - 04CH6106 - Experimental And Characterization Techniques For Nanotechnology
PSO1 PSO2 PSO3

04CH6106/PSO
3 3 2
04CH6116
04CH6116 NANO TOXICOLOGY 3-0-0:3 2016
COURSE END SURVEY - 04CH6116 - NANO TOXICOLOGY

CO->PO MAPPING - 04CH6116 - NANO TOXICOLOGY
CO->PSO MAPPING - 04CH6116 - NANO TOXICOLOGY
COURSE->PO MAPPING - 04CH6116 - NANO TOXICOLOGY
04CH6116/PO
COURSE->PSO MAPPING - 04CH6116 - NANO TOXICOLOGY
PSO1 PSO2 PSO3

04CH6116/PSO
04CH6118
04CH6118 Polymer Nanocomposites 3-0-0:3 2016
No. Course Outcome - 04CH6118 - Polymer Nanocomposites Target
CO1 Describe the fundamental aspects of polymeric nanocomposites 60%
CO2 Impart a knowledge of developing polymer nanocomposites. 60%
CO3 Expose to the ways to improve the polymer nanofiller interaction 60%
CO4 To acquaint with various basic properties of polymer nanocomposites 60%
AJCE 275
CHE
CO5 To acquaint with various processing properties as well as its biodegradation behaviour 60%
CO6 To familiarize with the crystallization behaviour and applications of polymer nanocomposites 60%
COURSE END SURVEY - 04CH6118 - Polymer Nanocomposites
To what extent you describe the fundamental aspects of polymeric nanocomposites

CO1
To what extent you impart a knowledge of developing polymer nanocomposites.

CO2
To what extent you expose to the ways of improving polymer- nanofiller interactions
CO3
To what extent you acquaint with basic properties of polymer nanocomposites

CO4
To what extent you acquaint with various processing properties as well as its biodegradation behaviour of
polymer nanocomposites
CO5
To what extent you familiarize with the crystallization behaviour and applications of polymer nanocomposites
CO6
CO->PO MAPPING - 04CH6118 - Polymer Nanocomposites
CO1 1 1
CO2 1 2 1
CO3 2 3 1 1
CO4 1 2
CO5 1 2
CO6 1 2
CO->PSO MAPPING - 04CH6118 - Polymer Nanocomposites
CO1 2
CO2 2
CO3 2
CO4 1
AJCE 276
CHE
CO5 1
CO6 1
COURSE->PO MAPPING - 04CH6118 - Polymer Nanocomposites
04CH6118/PO
2 3 2 1
COURSE->PSO MAPPING - 04CH6118 - Polymer Nanocomposites
PSO1 PSO2 PSO3

04CH6118/PSO
2
04CH6192
04CH6192 Mini Project 0-0-4:2 2016
No. Course Outcome - 04CH6192 - Mini Project Target
To identify a technical problem relevant to nanotechnology based on literature survey and develop a
CO1 60%
scientific problem
Analyze the problem systematically and develop objective statements to complete the review report
CO2 60%
and conduct the experiments as per the work plan
CO3 Develop a work plan with short term ( weekly) and long term ( monthly goals) goals 60%
CO4 Conduct the experiments as per the work plan and document it 60%
CO5 Analyze the results and make a report and communicate the results to journals. 60%
COURSE END SURVEY - 04CH6192 - Mini Project
How far you are able to to identify a technical problem relevant to nanotechnology based on literature survey
and develop a scientific problem
CO1
To What extent you can analyze the problem systematically and develop objective statements to complete
the review report and conduct the experiments as per the work plan
CO2
To what extent you are able to develop a work plan with short term ( weekly) and long term ( monthly goals)
goals
CO3
How far you can able to conduct the experiments as per the work plan and document it
CO4
AJCE 277
CHE
How far you can analyze the results and make a report and communicate the results to journals.
CO5
CO->PO MAPPING - 04CH6192 - Mini Project
CO1
CO2
CO3
CO4
CO5
CO->PSO MAPPING - 04CH6192 - Mini Project
CO1
CO2
CO3
CO4
CO5
COURSE->PO MAPPING - 04CH6192 - Mini Project
04CH6192/PO
COURSE->PSO MAPPING - 04CH6192 - Mini Project
PSO1 PSO2 PSO3

04CH6192/PSO
04CH6194
04CH6194 LAB II 0-0-2:1 2016
No. Course Outcome - 04CH6194 - LAB II Target
CO1 Evaluate the morphology and topography of nanomaterials 61%
CO2 Develop and characterize nanocomposites 61%
CO3 Estimate particle size of nano-materials 61%
AJCE 278
CHE
CO4 Evaluate crystallinity and phases in a material 61%
CO5 Identify the functional groups of nanomaterials 61%
COURSE END SURVEY - 04CH6194 - LAB II
To what extend are you able to Evaluate the morphology and topography of nanomaterials
CO1
To what extend are you able to develop and characterize nano-composites

CO2
To what extend are you able to develop estimate particle size of nano-materials
CO3
To what extend are you able to evaluate crystallinity and phases in a material
CO4
To what extend are you able to identify the functional groups of nano-materials
CO5
CO->PO MAPPING - 04CH6194 - LAB II
CO1 1 1 1 3 1 1 2 1 1
CO2 2 3 3 1 3 2 1 1 2
CO3 2 2 3 1 3 1 1 1 1 2
CO4 2 2 3 1 3 2 1 2 1 3
CO5 2 2 3 1 3 2 1 1 1 2
CO->PSO MAPPING - 04CH6194 - LAB II
CO1 2 2 1
CO2 2 3
CO3 1 3
CO4 2 3
CO5 1 3
COURSE->PO MAPPING - 04CH6194 - LAB II
AJCE 279
CHE
04CH6194/PO
2 3 3 3 3 2 1 2 1 3
COURSE->PSO MAPPING - 04CH6194 - LAB II
PSO1 PSO2 PSO3

04CH6194/PSO
2 3 1
04CH6112
04CH6112 Nanotechnology in Energy Conversion and Storage 3-0-0:3 2016
COURSE END SURVEY - 04CH6112 - Nanotechnology in Energy Conversion and Storage

CO->PO MAPPING - 04CH6112 - Nanotechnology in Energy Conversion and Storage
CO->PSO MAPPING - 04CH6112 - Nanotechnology in Energy Conversion and Storage
COURSE->PO MAPPING - 04CH6112 - Nanotechnology in Energy Conversion and Storage
04CH6112/PO
COURSE->PSO MAPPING - 04CH6112 - Nanotechnology in Energy Conversion and Storage
PSO1 PSO2 PSO3

04CH6112/PSO
04CH6114
04CH6114 Nano biotechnology 3-0-0:3 2016
No. Course Outcome - 04CH6114 - Nano biotechnology Target
Describe nanoparticles based on their dimensionality and understand the role of proteins in
CO1 71%
biomaterials.
Demonstrate knowledge about the principles of bionanomachines and understand the techniques
CO2 71%
behind their construction.
Learn the concepts, broad applications of self-assembly phenomena and know the basic self-
CO3 71%
assembling techniques.
Understand protein based nanostructures, application in bioelectronic devices and their microbial
CO4 71%
production.
AJCE 280
CHE
Explain knowledge and principles associated with DNA based nanostructures,applications in

CO5 71%
medical diagnostics and drug delivery.
CO6 Account and give examples of applications of nanobiotechnology in various fields. 71%
COURSE END SURVEY - 04CH6114 - Nano biotechnology
To what extent you are able to explain the dimensionality of nanoparticles and role of proteins in
biomaterials?
CO1
To what extent you understood the principles of bio nanomachines and techniques behind the construction.?
CO2
To what extent you are able to explain basic self-assembling techniques..?

CO3
To what understood the protein-based nanostructures, application in bioelectronic devices and their
microbial production.?
CO4
To what extent able to explain about DNA based nanostructures their applications in medical diagnostics and
drug delivery?
CO5
To what extent able to explain applications of nanobiotechnology in various fields.?

CO6
CO->PO MAPPING - 04CH6114 - Nano biotechnology
CO1 2 1 3 1 3 2 1 1 2 2 2 3
CO2 2 2 3 1 3 2 1 1 2 2 2 3
CO3 2 2 3 1 3 2 1 1 2 2 2 3
CO4 1 2 3 1 3 2 1 1 2 2 2 3
CO5 2 2 3 1 3 2 1 1 2 2 2 3
CO6 2 1 3 1 3 2 2 2 2 2 2 3
CO->PSO MAPPING - 04CH6114 - Nano biotechnology
CO1 3 3 3
CO2 3 3 3
AJCE 281
CHE
CO3 3 3 3
CO4 3 3 3
CO5 3 3 3
CO6 3 3 3
COURSE->PO MAPPING - 04CH6114 - Nano biotechnology
04CH6114/PO
2 2 3 1 3 2 2 2 2 2 2 3
COURSE->PSO MAPPING - 04CH6114 - Nano biotechnology
PSO1 PSO2 PSO3

04CH6114/PSO
3 3 3
04CH6124
04CH6124 Nanomedicine 3-0-0:3 2016
No. Course Outcome - 04CH6124 - Nanomedicine Target
CO1 Identify the structure and properties of biological nanomaterials. 61%
CO2 Describe the various polymeric materials used in nano-biotechnology 61%
CO3 Illustrate the use of nano-materials for drug delivery 61%
CO4 Categorize various biomedical nano-particles and their conjugations. 61%
CO5 Illustrate cancer targeting and treatment techniques using nanomaterials 61%
CO6 Discuss the various aspects of immunotherapy using nano-materials 61%
COURSE END SURVEY - 04CH6124 - Nanomedicine
To what extend are you able to identify the structure and properties of biological nano-materials.
CO1
To what extend are you able to describe the various polymeric materials used in nano-biotechnology
CO2
To what extend are you able to illustrate the use of nano-materials for drug delivery
CO3
AJCE 282
CHE
To what extend are you able to categorize various biomedical nano-particles and their conjugations.
CO4
To what extend are you able to illustrate cancer targeting and treatment techniques using nano-materials
CO5
To what extend are you able to discuss the various aspects of immunotherapy using nano-materials
CO6
CO->PO MAPPING - 04CH6124 - Nanomedicine
CO1 1 1 1 1 1 1
CO2 1 1 1 2 3 2
CO3 1 1 1 2 3 3
CO4 1 2 1 2 3 3
CO5 1 1 1 2 3 3
CO6 1 1 1 1 3 3
CO->PSO MAPPING - 04CH6124 - Nanomedicine
CO1 1 1
CO2 1 1
CO3 2 2
CO4 1 2
CO5 2 2
CO6 1 2
COURSE->PO MAPPING - 04CH6124 - Nanomedicine
04CH6124/PO
1 2 1 2 3 3
COURSE->PSO MAPPING - 04CH6124 - Nanomedicine
PSO1 PSO2 PSO3

04CH6124/PSO
2 2
SEMESTER-3
04CH7107
AJCE 283
CHE
04CH7107 Photonics and Plasmonics 3-0-0:3 2016
No. Course Outcome - 04CH7107 - Photonics and Plasmonics Target
Explain the significance of Maxwell's equations and demonstrate Bloch's theorem for the
CO1 66%
development of band gaps in photonic crystals
CO2 Demonstrate the development of optical band gaps in 1-, 2-, and 3 dimensional photonic crystals 66%
CO3 Illustrate the applications of photonic crystals and photonic crystal fibers. 66%
CO4 Demonstrate the applications of nonlinear photonic crystal devices 66%
CO5 Explain the development of plasmonics at nanoscale dimensions and the interactions involved 66%
CO6 Demonstrate surface plasmon resonance and the features of near-field photonics 66%
COURSE END SURVEY - 04CH7107 - Photonics and Plasmonics
How far you are able to explain the significance of Maxwell's equations and demonstrate Bloch's theorem for
the development of band gaps in photonic crystals?
CO1
How far your are able to demonstrate the development of optical band gaps in 1-, 2-, and 3 dimensional
photonic crystals
CO2
How well can you Illustrate the applications of photonic crystals and photonic crystal fibers.
CO3
How well you are able to demonstrate the applications of nonlinear photonic crystal devices?
CO4
Hw well can you explain the development of plasmonics at nanoscale dimensions and the interactions
involved?
CO5
How well can you demonstrate surface plasmon resonance and the features of near-field photonics?
CO6
CO->PO MAPPING - 04CH7107 - Photonics and Plasmonics
CO1 3 3 3 3 3 3 2
CO2 3 3 3 3 3 3 2 3
AJCE 284
CHE
CO3 3 3 3 3 3 3
CO4 3 3 3 3 3 3
CO5 3 3 3 3 3 3
CO6 3 3 3 3 3 3
CO->PSO MAPPING - 04CH7107 - Photonics and Plasmonics
CO1
CO2
CO3
CO4
CO5
CO6
COURSE->PO MAPPING - 04CH7107 - Photonics and Plasmonics
04CH7107/PO
3 3 3 3 3 3 2 3
COURSE->PSO MAPPING - 04CH7107 - Photonics and Plasmonics
PSO1 PSO2 PSO3

04CH7107/PSO
04CH7191
04CH7191 Seminar 0-0-2:2 2016
No. Course Outcome - 04CH7191 - Seminar Target
CO1 Interpreting and gathering information from survey of literature 70%
Identify, formulate, analyse and provide solution based on the knowledge gathered from literature
CO2 60%
survey
CO3 Effectively communicate by written, oral and visual means 65%
CO4 To be able to make technical presentations 65%
CO5 To be able to prepare seminar report and publications 60%
COURSE END SURVEY - 04CH7191 - Seminar
AJCE 285
CHE
To what extent you are able to interpreting and gathering information from survey of literature
CO1
To what extend you are able to identify, formulate, analyse and provide solution based on the knowledge
gathered from literature survey
CO2
To what extend you are able to effectively communicate by written, oral and visual means
CO3
To what extend you are able to make technical presentations

CO4
To what extend you are able to prepare seminar report and publications
CO5
CO->PO MAPPING - 04CH7191 - Seminar
CO1
CO2
CO3
CO4
CO5
CO->PSO MAPPING - 04CH7191 - Seminar
CO1
CO2
CO3
CO4
CO5
COURSE->PO MAPPING - 04CH7191 - Seminar
04CH7191/PO
COURSE->PSO MAPPING - 04CH7191 - Seminar
PSO1 PSO2 PSO3

04CH7191/PSO
AJCE 286
CHE
04CH7101
04CH7101 Self Assembling nanostructured molecular materials and devices 3-0-0:3 2016
No. Course Outcome - 04CH7101 - Self Assembling nanostructured molecular materials and devices Target
CO1 To understand the basic concepts of nano-self-assembly of nano-materials and bio-molecules 60%
CO2 To analyse the formation and applications of Vesicles and Liposomes 60%
CO3 To analyse the unique properties of Dendrimers and their applications 60%
CO4 Prepare natural and artificial Supramolecular Complexes 60%
CO5 Prepare SAMs and Langmuir Blodgett films 60%
CO6 Evaluate mesoporous materials and their applications 60%
COURSE END SURVEY - 04CH7101 - Self Assembling nanostructured molecular materials and devices
How well can you understand the basic concepts of nano-self-assembly of nano-materials and bio-molecules
CO1
How well can you analyse the formation and applications of Vesicles and Liposomes
CO2
How well can you analyse the unique properties of Dendrimers and their applications
CO3
How familiar are you with the preparation of natural and artificial Supramolecular Complexes
CO4
How familiar are you with the preparation methods for SAMs and Langmuir Blodgett films
CO5
How well can you evaluate mesoporous materials and their applications
CO6
CO->PO MAPPING - 04CH7101 - Self Assembling nanostructured molecular materials and devices
CO1 2 1 1
CO2 2 2 1
CO3 3 3 1
CO4 3 1 1
AJCE 287
CHE
CO5 3 1 3 1
CO6 2 1 3
CO->PSO MAPPING - 04CH7101 - Self Assembling nanostructured molecular materials and devices
CO1
CO2
CO3
CO4
CO5
CO6
COURSE->PO MAPPING - 04CH7101 - Self Assembling nanostructured molecular materials and devices
04CH7101/PO
2 3 1 1 3 1 1 1
COURSE->PSO MAPPING - 04CH7101 - Self Assembling nanostructured molecular materials and devices
PSO1 PSO2 PSO3

04CH7101/PSO
04CH7115
04CH7115 Drug delivery Systems 3-0-0:3 2016
No. Course Outcome - 04CH7115 - Drug delivery Systems Target
To describe the basic principles and operation of image acquisition and interpretation using MRI
CO1 72%
and NMR along with an understanding of their instrumentation.
To understand the fundamentals and principles of bioactive glasses, their preparation, properties
CO2 72%
and applications of these in drug delivery systems.
CO3 To know about nanomaterials used in medical implants and cancer treatment 72%
To learn the approaches to the diagnosis and treatment of common cancers and familiarize with the
CO4 72%
various strategies used in targeted therapies.
To be familiar with the different materials and approaches used in the design and fabrication of drug
CO5 72%
delivery systems.
To understand the strategies and considerations in the design of different drug delivery systems that
CO6 72%
will optimize drug delivery to the body from different routes of administration.
AJCE 288
CHE
COURSE END SURVEY - 04CH7115 - Drug delivery Systems
Are you able to distinguish between the principle and operation of an MRI and NMR
CO1
Can you name a bioactive material and its application

CO2
Are you satisfied with the knowledge about implants and their use in cancer treatment
CO3
Do you feel that this section was advanced

CO4
Do you agree that you can associate with design of drug delivery systems
CO5
Do you agree that your knowledge on drug delivery routes is increased

CO6
CO->PO MAPPING - 04CH7115 - Drug delivery Systems
CO1 1 1 1 1 1 1 1
CO2 1 3 3 2 2 1 2 2 1
CO3 2 1 1 1 1 1
CO4 1 1
CO5 3 2 1 1 2 1
CO6 2 1 1 1 1
CO->PSO MAPPING - 04CH7115 - Drug delivery Systems
CO1 3 1
CO2 3 3
CO3 3 2
CO4 3 2
CO5 2 2
CO6 1 2
AJCE 289
CHE
COURSE->PO MAPPING - 04CH7115 - Drug delivery Systems
04CH7115/PO
1 3 3 2 2 2 1 1 2 2 1 1
COURSE->PSO MAPPING - 04CH7115 - Drug delivery Systems
PSO1 PSO2 PSO3

04CH7115/PSO
3 3
04CH7193
04CH7193 PROJECT (PHASE I) 0-0-12:6 2016
No. Course Outcome - 04CH7193 - PROJECT (PHASE I) Target
CO2 60%
CO4 Ability to use modern techniques of characterization and analysis tools and materials 60%
Students will be able to carry out investigations involved in design, consider and evaluate alternate
CO5 assumptions, approaches, and procedures. Ability to fabricate system components related to 60%
engineering problems giving consideration to environment and society
Complete an independent research project, resulting in at least a thesis publication, and research
CO6 60%
outputs in terms of publications in SCI indexed journals and conference proceedings
COURSE END SURVEY - 04CH7193 - PROJECT (PHASE I)
CO1
CO2
To what extent you improved your communications skills after evaluation

CO3
Did you ever gone through any modern characterization techniques and advanced engineering materials
while completing thesis ?
CO4
AJCE 290
CHE
Did you ever considered environmental impact and ethics in your design and fabrication ?
CO5
Are you able to make good project report with a possibility of a publication in conference and journal
CO6
CO->PO MAPPING - 04CH7193 - PROJECT (PHASE I)
CO1 2 1
CO2 2 1
CO3
CO4 1 3 2 2
CO5 3 2 2 3
CO6 1
CO->PSO MAPPING - 04CH7193 - PROJECT (PHASE I)
CO1
CO2
CO3
CO4
CO5
CO6
COURSE->PO MAPPING - 04CH7193 - PROJECT (PHASE I)
04CH7193/PO
3 2 3 3 2
COURSE->PSO MAPPING - 04CH7193 - PROJECT (PHASE I)
PSO1 PSO2 PSO3

04CH7193/PSO
04CH7103
04CH7103 Societal Implications of Nanotechnology 3-0-0:3 2016
AJCE 291
CHE
No. Course Outcome - 04CH7103 - Societal Implications of Nanotechnology Target
CO1 To correlate the use of nanotechnology products with their impact on society 66%
CO2 Identify specific models for nanotechnology commercialization and sustainability, and Equity. 66%
CO3 Analyse the behavior of nanotechnological revolution and commercialization on society 66%
Familiarize with thr regulatory issues and their impacts on development on nanotechnology based
CO4 66%
products
CO5 Understand the ethics and laws related to nanotechnology 66%
CO6 To understand the intellectual property rights associated with the development of nanotechnology 66%
COURSE END SURVEY - 04CH7103 - Societal Implications of Nanotechnology
To what extend you are able to correlate the use of nanotechnology products with their impact on society
CO1
-To what extend you are able to identify specific models for nanotechnology commercialization and
sustainability, and Equity.
CO2
to what extend you are able to Analyse the behavior of nanotechnological revolution and commercialization
on society
CO3
To what extend you are able to familiarize with the regulatory issues and their impacts on development on
nanotechnology based products
CO4
To what extend you are able to Understand the ethics and laws related to nanotechnology
CO5
To what extend you are able to To understand the intellectual property rights associated with the
development of nanotechnology
CO6
CO->PO MAPPING - 04CH7103 - Societal Implications of Nanotechnology
CO1 2 3 3
CO2 2 3 3
CO3 2 3 3
CO4 2 3 3
CO5 2 3 3 3
AJCE 292
CHE
CO6 2 3 3
CO->PSO MAPPING - 04CH7103 - Societal Implications of Nanotechnology
CO1 1 1
CO2 1
CO3 1
CO4 1
CO5 1 3
CO6 1
COURSE->PO MAPPING - 04CH7103 - Societal Implications of Nanotechnology
04CH7103/PO
2 3 3 3
COURSE->PSO MAPPING - 04CH7103 - Societal Implications of Nanotechnology
PSO1 PSO2 PSO3

04CH7103/PSO
1 3
04CH7109
04CH7109 Nanodevice Technology 3-0-0:3 2016
COURSE END SURVEY - 04CH7109 - Nanodevice Technology

CO->PO MAPPING - 04CH7109 - Nanodevice Technology
CO->PSO MAPPING - 04CH7109 - Nanodevice Technology
COURSE->PO MAPPING - 04CH7109 - Nanodevice Technology
04CH7109/PO
COURSE->PSO MAPPING - 04CH7109 - Nanodevice Technology
PSO1 PSO2 PSO3

04CH7109/PSO
SEMESTER-4
AJCE 293
CHE
04CH7194
04CH7194 Project (Phase -II) 0-0-21:12 2016
No. Course Outcome - 04CH7194 - Project (Phase -II) Target
CO1 Ability to effectively gather and interpret information from literature survey. 60%
CO2 60%
CO4 Ability to use modern techniques of characterization and analysis of materials 60%
Students will be able to carry out calculations involved in syntheis, characterisation, and evaluate
CO5 alternate assumptions, approaches, and procedures. Ability to fabricate system components related 60%
to engineering problems giving consideration to environment and society
Complete an independent research project, resulting in at least a thesis publication, and research
CO6 60%
outputs in terms of publications in SCI indexed journals and conference proceedings
COURSE END SURVEY - 04CH7194 - Project (Phase -II)
CO1
To what extent you use this literature survey knowledge to identify, formulate, analyse and solve complex
CO2
To what extent you improved your communications skills after evaluation

CO3
Did you ever gone through any modern characterization techniques and advanced engineering materials
while completing thesis ?
CO4
Did you ever considered environmental impact and ethics in your design and fabrication ?
CO5
Did you able to publish your research output in any of SCI indexed journals or conference proceedings ?
CO6
CO->PO MAPPING - 04CH7194 - Project (Phase -II)
CO1 1 1
AJCE 294
CHE
CO2 2 2 2 2
CO3 2
CO4 2 3 2 1
CO5 2 1
CO6 1 1 1
CO->PSO MAPPING - 04CH7194 - Project (Phase -II)
CO1
CO2 1
CO3 3
CO4 2
CO5 1 1
CO6
COURSE->PO MAPPING - 04CH7194 - Project (Phase -II)
04CH7194/PO
2 3 2 1 2 2 1
COURSE->PSO MAPPING - 04CH7194 - Project (Phase -II)
PSO1 PSO2 PSO3

04CH7194/PSO
2 1 3
SEMESTER-1
04CH6201
04CH6201 Applied Statistics 4-0-0:4 2020
No. Course Outcome - 04CH6201 - Applied Statistics Target
CO1 Understand various probability distributions and their fitting 50%
CO2 Choose suitable sampling technique during environmental sampling 60%
CO3 Evaluate the relationship between various environmental parameters 55%
AJCE 295
CHE
Make conclusion or prediction using different types of statistical inferences based on the collected
CO4 60%
data
Analyze various experimental data sets based on their means and apply different types of
CO5 50%
experimental designs
CO6 Analyze the data collected over time and forecast the future values 55%
COURSE END SURVEY - 04CH6201 - Applied Statistics
CO1 CO2
CO3 CO4
CO5 CO6
CO->PO MAPPING - 04CH6201 - Applied Statistics
CO1 3 1 1 1 1
CO2 3 1 2 1 1
CO3 3 1 3 1 1
CO4 3 1 3 1 1
CO5 3 1 3 1 1
CO6 3 1 3 1 1
CO->PSO MAPPING - 04CH6201 - Applied Statistics
CO1 2
CO2 2
CO3 2 2
CO4 2 2
CO5 2 3
CO6 2 3
COURSE->PO MAPPING - 04CH6201 - Applied Statistics
04CH6201/PO
3 1 3 1 1
COURSE->PSO MAPPING - 04CH6201 - Applied Statistics
PSO1 PSO2 PSO3
04CH6201/PSO
AJCE 296
CHE
2 3
04CH6203
04CH6203 ENVIRONMENTAL CHEMISTRY 4-0-0:4 2020
No. Course Outcome - 04CH6203 - ENVIRONMENTAL CHEMISTRY Target
Understand the adsorption mechanisms and the governing factors and the fundamentals of acid-
CO1 65%
base equilibrium
Understand the properties of colloids and their removal, and the summarize the principles of
CO2 65%
reverse osmosis and spectroscopy
Understand the various aspects of radioactivity and the implement proper management of
CO3 60%
radioactive waste
Characterize the water for physicochemical and biological parameters and to apply the advanced
CO4 60%
oxidation processes for mineralization of organic pollutants
Classify major organic pollutants in the environment and employ the biodegradation and enzyme
CO5 60%
based reactions for pollutant removal
Summarize the various chromatographic, electrophoretic and spectroscopic techniques used in

CO6 60%
analysis of environmental samples
COURSE END SURVEY - 04CH6203 - ENVIRONMENTAL CHEMISTRY
CO1 CO2
CO3 CO4
CO5 CO6
CO->PO MAPPING - 04CH6203 - ENVIRONMENTAL CHEMISTRY
CO1 3 1 2
CO2 3 1 2
CO3 3 1 2
CO4 3 1 2
CO5 3 2 2
CO6 3 1 2
CO->PSO MAPPING - 04CH6203 - ENVIRONMENTAL CHEMISTRY
AJCE 297
CHE
CO1 2 1 2
CO2 2 1 2
CO3 3 3 2
CO4 3 3 2
CO5 3 3 2
CO6 2 1 2
COURSE->PO MAPPING - 04CH6203 - ENVIRONMENTAL CHEMISTRY
04CH6203/PO
3 2 2
COURSE->PSO MAPPING - 04CH6203 - ENVIRONMENTAL CHEMISTRY
PSO1 PSO2 PSO3

04CH6203/PSO
3 3 2
04CH6205
04CH6205 ENVIRONMENTAL MICROBIOLOGY 3-0-0:3 2020
No. Course Outcome - 04CH6205 - ENVIRONMENTAL MICROBIOLOGY Target
Understand the characteristics of different types of microorganisms and their role in various
CO1 65%
environmental applications
Summarize the principle and use of various types of microscopes and to use it for examining the
CO2 65%
bacteria
Summarize the bacterial growth and metabolism and the role of enzymes, bioenergetics and culture
CO3 65%
media
CO4 Analyze the bacteriological quality of water and wastewater using different methods 65%
Differentiate various microbial industrial products and apply biotechnological methods for waste
CO5 65%
treatment
Recognize the role of microorganisms in biogeochemical cycling and understand the principles and
CO6 65%
methods of pasteurization and sterilization
COURSE END SURVEY - 04CH6205 - ENVIRONMENTAL MICROBIOLOGY
To what extend do you understand the characteristics of different types of microorganisms and their role in
various environmental applications
CO1
AJCE 298
CHE
To what extend could you summarize the principle and use of various types of microscopes and to use it for
examining the bacteria
CO2
To what extend could you summarize the bacterial growth and metabolism and the role of enzymes,
bioenergetics and culture media
CO3
To what extend could you analyze the bacteriological quality of water and wastewater using different
methods
CO4
To what extend could you differentiate various microbial industrial products and apply biotechnological
methods for waste treatment
CO5
To what extend could you recognize the role of microorganisms in biogeochemical cycling and understand
the principles and methods of pasteurization and sterilization
CO6
CO->PO MAPPING - 04CH6205 - ENVIRONMENTAL MICROBIOLOGY
CO1 3 1 1
CO2 3 1 1
CO3 1 1
CO4 3 1 2
CO5 3 1 2
CO6 2 1
CO->PSO MAPPING - 04CH6205 - ENVIRONMENTAL MICROBIOLOGY
CO1 3 1
CO2 1
CO3 1 1
CO4 3 2 2
CO5 3 3 2
CO6 2 2 2
COURSE->PO MAPPING - 04CH6205 - ENVIRONMENTAL MICROBIOLOGY
04CH6205/PO
AJCE 299
CHE
3 1 2
COURSE->PSO MAPPING - 04CH6205 - ENVIRONMENTAL MICROBIOLOGY
PSO1 PSO2 PSO3

04CH6205/PSO
3 3 2
04CH6207
04CH6207 PHYSICO-CHEMICAL TREATMENT SYSTEMS 3-0-0:3 2020
No. Course Outcome - 04CH6207 - PHYSICO-CHEMICAL TREATMENT SYSTEMS Target
Analyze the various water characteristics, evaluate physicochemical processes for water treatment
CO1 72%
and design sedimentation tank and filters
Understand the mechanism of disinfection and the various methods, and design and analyze water
CO2 72%
distribution system
CO3 Estimate the quantity and quality of wastewater, and know the effluent standards 72%
CO4 Evaluate the process kinetics and analyze various types of reactors 72%
CO5 Design various physicochemical processes for preliminary treatment of wastewater 72%
Design physicochemical processes such as aeration, precipitation, adsorption and disinfection for
CO6 72%
wastewater treatment
COURSE END SURVEY - 04CH6207 - PHYSICO-CHEMICAL TREATMENT SYSTEMS
Where you able to understand the water characteristics and basic processes involved in water treatment
CO1
Where the concepts of disinfection and water distribution system understandable

CO2
Where you able to understand the concepts of wastewater properties and treatment strategies
CO3
Where the concepts of wastewater treatment kinetics understandable

CO4
Where the concepts on process design of preliminary treatment clear

CO5
Where the concepts involving process design of treatment units understandable

CO6
AJCE 300
CHE
CO->PO MAPPING - 04CH6207 - PHYSICO-CHEMICAL TREATMENT SYSTEMS
CO1 3 1 2
CO2 3 1 1
CO3 3 1 2
CO4 3 1 2
CO5 3 1 2
CO6 2 1 1
CO->PSO MAPPING - 04CH6207 - PHYSICO-CHEMICAL TREATMENT SYSTEMS
CO1 3 3 3
CO2 3 3 2
CO3 3 3 2
CO4 3 2 2
CO5 3 2 2
CO6 2 1 1
COURSE->PO MAPPING - 04CH6207 - PHYSICO-CHEMICAL TREATMENT SYSTEMS
04CH6207/PO
3 1 2
COURSE->PSO MAPPING - 04CH6207 - PHYSICO-CHEMICAL TREATMENT SYSTEMS
PSO1 PSO2 PSO3

04CH6207/PSO
3 3 3
04CH6209
04CH6209 SOLID AND HAZARDOUS WASTE MANAGEMENT 3-0-0:3 2020
No. Course Outcome - 04CH6209 - SOLID AND HAZARDOUS WASTE MANAGEMENT Target
Identify the sources and types of solid waste, carry out the sampling and characterization and
CO1 80%
understand the regulations
AJCE 301
CHE
CO2 Summarize the various collection, separation and processing systems for solid waste 80%
CO3 Select suitable transport, treatment, recovery and recycling options for solid waste management 70%
CO4 Design an engineered landfill with proper leachate management, and remediate existing landfills 70%
Classify different types of hazardous wastes, recognize the regulations, carry out their collection
CO5 80%
and transport, and design different treatment systems for their management
CO6 Select the suitable disposal option for biomedical waste and design hazardous waste landfill 70%
COURSE END SURVEY - 04CH6209 - SOLID AND HAZARDOUS WASTE MANAGEMENT
CO1 CO2
CO3 CO4
CO5 CO6
CO->PO MAPPING - 04CH6209 - SOLID AND HAZARDOUS WASTE MANAGEMENT
CO1 2 2 2
CO2 1 1 2
CO3 3 1 1
CO4 3 2 2
CO5 3 1 2
CO6 2 1 1
CO->PSO MAPPING - 04CH6209 - SOLID AND HAZARDOUS WASTE MANAGEMENT
CO1 3 2 1
CO2 3 3 1
CO3 3 3 2
CO4 3 3 2
CO5 3 3 2
CO6 3 3 2
COURSE->PO MAPPING - 04CH6209 - SOLID AND HAZARDOUS WASTE MANAGEMENT
04CH6209/PO
3 2 2
COURSE->PSO MAPPING - 04CH6209 - SOLID AND HAZARDOUS WASTE MANAGEMENT
AJCE 302
CHE
PSO1 PSO2 PSO3

04CH6209/PSO
3 3 2
04GN6001
04GN6001 Research Methodology 0-2-0:2 2016
No. Course Outcome - 04GN6001 - Research Methodology Target
CO1 To get introduced to research philosophy and processes in general. 60%
CO2 To formulate the research problem and prepare research plan 60%
CO3 Got the basic idea of IPR, copyright and patent for the social development 60%
CO4 To apply various numerical /quantitative techniques for data analysis 60%
CO5 To prepare and communicate the research findings effectively with modern tool 60%
COURSE END SURVEY - 04GN6001 - Research Methodology
to what extent you understand what is research means and its types
CO1
At what confidence level you are able to formulate and prepare research problem and plan
CO2
what level you understand the importance of IPR Copy right and patent
CO3
at what extent you apply various numerical /quantitative techniques for data analysis
CO4
how much you are capable of preparing and communicate the research findings effectively with modern tool
CO5
CO->PO MAPPING - 04GN6001 - Research Methodology
CO1
CO2
CO3
AJCE 303
CHE
CO4
CO5
CO->PSO MAPPING - 04GN6001 - Research Methodology
CO1
CO2
CO3
CO4
CO5
COURSE->PO MAPPING - 04GN6001 - Research Methodology
04GN6001/PO
COURSE->PSO MAPPING - 04GN6001 - Research Methodology
PSO1 PSO2 PSO3

04GN6001/PSO
04CH6291
04CH6291 SEMINAR-I 0-0-2:2 2020
No. Course Outcome - 04CH6291 - SEMINAR-I Target
CO2 61%
CO4 Ability to cultivate the critically analyzing the recent technological advancement in the seminar report 61%
CO5 Students will be able to present a technical topic systematically 61%
Complete an independent seminar report, resulting in at least a publication as a review in UGC

CO6 61%
approved journals and conference proceedings.
COURSE END SURVEY - 04CH6291 - SEMINAR-I
CO1
AJCE 304
CHE
CO2
To what extend you improved your communications skills after evaluation

CO3
Are u able to analyze critically the recent technological advancement in the area of Seminar
CO4
Are you able to present a technical topic systematically

CO5
Are u able to complete an independent seminar report with a posiibility of a publication

CO6
CO->PO MAPPING - 04CH6291 - SEMINAR-I
CO1 3 2
CO2 3 2
CO3 3 2
CO4 3 2
CO5 1 1
CO6 3 1 2
CO->PSO MAPPING - 04CH6291 - SEMINAR-I
CO1 3 1 1
CO2 3 1 1
CO3 2 2 2
CO4 2 2 2
CO5 2 2 1
CO6 3 3 2
COURSE->PO MAPPING - 04CH6291 - SEMINAR-I
04CH6291/PO
3 1 2
COURSE->PSO MAPPING - 04CH6291 - SEMINAR-I
AJCE 305
CHE
PSO1 PSO2 PSO3

04CH6291/PSO
3 3 2
04CH6293
04CH6293 ENVIRONMENTAL ANALYSIS LAB-I 0-0-2:1 2020
No. Course Outcome - 04CH6293 - ENVIRONMENTAL ANALYSIS LAB-I Target
CO1 Prepare and sterilize the culture media and inoculate or streak the bacterial culture 70%
CO2 Enumerate the bacteria by using standard plate count and multiple tube fermentation test 70%
CO3 Analyze the water/wastewater sample for microbial contamination 70%
CO4 Estimate the heavy metal concentration in a water sample 70%
CO5 Measure the noise level 70%
CO6 Do air sampling and analyze the important air quality parameters 70%
COURSE END SURVEY - 04CH6293 - ENVIRONMENTAL ANALYSIS LAB-I
Where you able to understand and operate on the procedures for culture media and bacterial culture
preparation
CO1
Where you able to Enumerate the bacteria by using standard plate count and multiple tube fermentation test
CO2
Where you able to analyse the water/wastewater sample for microbial contamination
CO3
Where you able to estimate the heavy metal concentration in a water sample
CO4
Where you able to measure the noise level

CO5
Where you able to do air sampling and analyze the important air quality parameters
CO6
CO->PO MAPPING - 04CH6293 - ENVIRONMENTAL ANALYSIS LAB-I
AJCE 306
CHE
CO1 3 2
CO2 3 2
CO3 3 2
CO4 3 2
CO5 1 1
CO6 3 1 2
CO->PSO MAPPING - 04CH6293 - ENVIRONMENTAL ANALYSIS LAB-I
CO1 3 1 1
CO2 3 1 1
CO3 2 2 2
CO4 2 2 2
CO5 2 2 1
CO6 3 3 2
COURSE->PO MAPPING - 04CH6293 - ENVIRONMENTAL ANALYSIS LAB-I
04CH6293/PO
3 1 2
COURSE->PSO MAPPING - 04CH6293 - ENVIRONMENTAL ANALYSIS LAB-I
PSO1 PSO2 PSO3

04CH6293/PSO
3 3 2
SEMESTER-2
04CH6202
04CH6202 BIOLOGICAL TREATMENT SYSTEMS 4-0-0:4 2020
No. Course Outcome - 04CH6202 - BIOLOGICAL TREATMENT SYSTEMS Target
Understand the role of microorganisms in wastewater treatment, and the stages of bacterial growth,
CO1 60%
and types of biological treatment processes
Develop the kinetics of biological treatment process, and evaluate the effect of temperature and
CO2 60%
oxygen on the process
AJCE 307
CHE
Differentiate the types of aerobic treatment systems, understand the basics of activated sludge
CO3 60%
process and process design considerations
CO4 Classify the various reactors used for biological treatment of wastewater and design the reactors 60%
Familiarize the aerated lagoons and stabilisation ponds, and understand the different processes
CO5 60%
involved in sludge treatment
Understand the processes involved in advanced biological treatment and evaluate the economics of
CO6 60%
the wastewater treatment process
COURSE END SURVEY - 04CH6202 - BIOLOGICAL TREATMENT SYSTEMS
To what extend are you able to understand the role of microorganisms in wastewater treatment, and the
stages of bacterial growth, and types of biological treatment processes?
CO1
To what extend are you able to develop the kinetics of biological treatment process, and evaluate the effect
of temperature and oxygen on the process?
CO2
To what extend are you able to differentiate the types of aerobic treatment systems, understand the basics
of activated sludge process and process design considerations?
CO3
To what extend are you able to classify the various reactors used for biological treatment of wastewater and
design the reactors?
CO4
To what extend are you able to familiarize the aerated lagoons and stabilisation ponds, and understand the
different processes involved in sludge treatment?
CO5
To what extend are you able to understand the processes involved in advanced biological treatment and
evaluate the economics of the wastewater treatment process?
CO6
CO->PO MAPPING - 04CH6202 - BIOLOGICAL TREATMENT SYSTEMS
CO1 2 1 3 3 3 1 1
CO2 2 1 3 3 2
CO3 3 1 3 2 3 1 2 1 1 1 1
CO4 3 1 3 2 3 1 2 1 1 1 1
CO5 1 3 2 1 3 2 2 1
CO6 1 3 2 1 3 2 2 1 1 1
AJCE 308
CHE
CO->PSO MAPPING - 04CH6202 - BIOLOGICAL TREATMENT SYSTEMS
CO1 1 1 2
CO2 1 2 2
CO3 3 2 2
CO4 3 2 2
CO5 2 3 2
CO6 2 3 2
COURSE->PO MAPPING - 04CH6202 - BIOLOGICAL TREATMENT SYSTEMS
04CH6202/PO
3 1 3 3 1 3 3 2 2 1 1 1
COURSE->PSO MAPPING - 04CH6202 - BIOLOGICAL TREATMENT SYSTEMS
PSO1 PSO2 PSO3

04CH6202/PSO
3 3 2
04CH6204
04CH6204 AIR QUALITY MONITORING AND CONTROL 3-0-0:3 2020
No. Course Outcome - 04CH6204 - AIR QUALITY MONITORING AND CONTROL Target
Summarize the various sources of air pollution, types and behavior of air pollutants, and their
CO1 60%
adverse effects
Evaluate the influence of various meteorologic parameters on the dispersion of air pollutants, and
CO2 60%
use mathematical modelling
CO3 Carry out sampling of different types of air pollutants, analyse each pollutant 60%
CO4 Summarize the various techniques or equipment used for air pollutant control 60%
CO5 Design an electrostatic precipitator and understand other processes for air pollution control 60%
Choose the suitable control option for specific gaseous pollutants and summarize the different
CO6 60%
aspects of noise pollution
COURSE END SURVEY - 04CH6204 - AIR QUALITY MONITORING AND CONTROL
To what extent were you able to summarize the various sources of air pollution, types and behaviour of air
pollutants, and their adverse effects
CO1
AJCE 309
CHE
To what extent were you able to evaluate the influence of various meteorological parameters on the
dispersion of air pollutants, and use mathematical modelling
CO2
To what extent were you able to carry out sampling of different types of air pollutants, analyse each pollutant
CO3
To what extent were you able to summarize the various techniques or equipment used for air pollutant
control
CO4
To what extent were you able to design an electrostatic precipitator and understand other processes for air
pollution control
CO5
To what extent were you able to choose the suitable control option for specific gaseous pollutants and
summarize the different aspects of noise pollution
CO6
CO->PO MAPPING - 04CH6204 - AIR QUALITY MONITORING AND CONTROL
CO1 1 3 3 2 1 2 2 2 1 1
CO2 1 3 2 3 3 2 2 1
CO3 1 3 3 2 1 2 2 2 1 1
CO4 3 2 3 2 2 2 3 1 1 1 1 1
CO5 3 1 3 2 2 3 3 1 1 1 2
CO6 1 3 3 2 2 2 2 2 1 1
CO->PSO MAPPING - 04CH6204 - AIR QUALITY MONITORING AND CONTROL
CO1 3 3 2
CO2 2 3 2
CO3 2 3 2
CO4 3 2 2
CO5 1 3 3
CO6 2 3 2
COURSE->PO MAPPING - 04CH6204 - AIR QUALITY MONITORING AND CONTROL
AJCE 310
CHE
04CH6204/PO
3 3 3 2 3 3 3 2 2 1 1 2
COURSE->PSO MAPPING - 04CH6204 - AIR QUALITY MONITORING AND CONTROL
PSO1 PSO2 PSO3

04CH6204/PSO
3 3 3
04CH6206
04CH6206 Environmental Impact Assessment 3-0-0:3 2020
No. Course Outcome - 04CH6206 - Environmental Impact Assessment Target
Recognize the various legislations pertaining to environmental protection in India and factors to be
CO1 55%
considered while measuring environmental impacts.
CO2 Summarize the environmental impacts of air pollutants and noise 55%
CO3 Evaluate the water quality impacts of various projects 55%
CO4 Identify the various methods used for environmental impact assessments 55%
CO5 Recognize the considerations for energy impact analysis 55%
CO6 Perform socioeconomic impact assessment, and familiarize the case studies in EIA. 55%
COURSE END SURVEY - 04CH6206 - Environmental Impact Assessment
Can you recognize various legislations and Acts pertaining to environmental protection in India?
CO1
Are you familiar with the environmental impacts of air and noise pollutants?
CO2
Can you evaluate the water quality impacts of various projects?

CO3
Are you able to identify the various methods used for environmental impacts?
CO4
Your understanding on energy impact analysis

CO5
Can you perform socioeconomic impact assessment of various developmental projects?
AJCE 311
CHE
CO6
CO->PO MAPPING - 04CH6206 - Environmental Impact Assessment
CO1 3 2 2 3 2 2 1 1 2
CO2 2 1
CO3 2 1 1
CO4 2 1
CO5 3
CO6 2 2 2 1 1 2 1 1 1 1
CO->PSO MAPPING - 04CH6206 - Environmental Impact Assessment
CO1
CO2
CO3
CO4
CO5
CO6
COURSE->PO MAPPING - 04CH6206 - Environmental Impact Assessment
04CH6206/PO
3 2 2 2 1 3 3 2 1 1 2
COURSE->PSO MAPPING - 04CH6206 - Environmental Impact Assessment
PSO1 PSO2 PSO3

04CH6206/PSO
04CH6214
04CH6214 SUSTAINABLE DEVELOPMENT AND GREEN TECHNOLOGY 3-0-0:3 2020
No. Course Outcome - 04CH6214 - SUSTAINABLE DEVELOPMENT AND GREEN TECHNOLOGY Target
CO1 Summarize the history of sustainable development and its various dimensions 60%
CO2 Understand the sustainability framework and assess the sustainability 60%
AJCE 312
CHE
CO3 Summarize the major global issues 60%
Understand the concept of carbon trading and recognize the related international summits and
CO4 60%
conventions
CO5 Identify sources and types of renewable energy technologies 60%
CO6 Evaluate various environmental biotechnological applications 60%
COURSE END SURVEY - 04CH6214 - SUSTAINABLE DEVELOPMENT AND GREEN TECHNOLOGY
Whether able to summarize history of sustainable development and its various dimensions?
CO1
Whether able to understand the sustainability framework and assess the sustainability?
CO2
Whether able to summarize the major global environmental issues?

CO3
Whether able to understand the concept of carbon trading and recognize the related international summits?
CO4
Whether able to identify the sources and types of renewable energy technologies?
CO5
Whether able to evaluate various environmental biotechnological applications?

CO6
CO->PO MAPPING - 04CH6214 - SUSTAINABLE DEVELOPMENT AND GREEN TECHNOLOGY
CO1 2 3 1 1
CO2 2 1 3 1 3 1 1
CO3 3 1 1
CO4 1 2 3 3 1 2 3 1 1 1 2
CO5 1 3 3 2 1 2 2 2 1
CO6 1 1 2 1 2 2 1 1 1 1
CO->PSO MAPPING - 04CH6214 - SUSTAINABLE DEVELOPMENT AND GREEN TECHNOLOGY
CO1 1 1 1
CO2 2 1 1
AJCE 313
CHE
CO3 3 1
CO4 3 2
CO5 3 3 2
CO6 3 1
COURSE->PO MAPPING - 04CH6214 - SUSTAINABLE DEVELOPMENT AND GREEN TECHNOLOGY
04CH6214/PO
1 3 3 3 3 2 2 3 1 1 1 2
COURSE->PSO MAPPING - 04CH6214 - SUSTAINABLE DEVELOPMENT AND GREEN TECHNOLOGY
PSO1 PSO2 PSO3

04CH6214/PSO
3 3 2
04CH6216
04CH6216 Environmental Nanotechnology 3-0-0:3 2020
No. Course Outcome - 04CH6216 - Environmental Nanotechnology Target
CO1 Summarize the physicochemical and biological approaches for nanomaterial synthesis 60%
CO2 Synthesize nanobiocomposites, and evaluate the nano pollution of various environmental media 60%
CO3 Summarize the different nanomaterials used for environmental remediation 60%
CO4 Apply nanofiltration for water and wastewater treatment 60%
Employ nanotechnology for treatment of industrial waste and evaluate the health impact and toxicity
CO5 of nanomaterials 60%
CO6 Assess the possible ecotoxicological effect of nanoparticles and the future of nanomaterials 60%
COURSE END SURVEY - 04CH6216 - Environmental Nanotechnology
Wher you able to Summarize the physicochemical and biological approaches for nanomaterial synthesis
CO1
Where you able to understand nanocomposite synthesis, and evaluate the nano pollution of various
environmental media
CO2
Where you able to Summarize the different nanomaterials used for environmental remediation
CO3
AJCE 314
CHE
Where you able to understand the application of nanofiltration for water and wastewater treatment
CO4
Where you able to Employ nanotechnology for treatment of industrial waste and evaluate the health impact
and toxicity of nanomaterials
CO5
Where you able to Employ nanotechnology for treatment of industrial waste and evaluate the health impact
and toxicity of nanomaterials
CO6
CO->PO MAPPING - 04CH6216 - Environmental Nanotechnology
CO1 2 2 2 1 2 2 2 3 1 1 1
CO2 3 2 3 1 2 3 3 1 2 1
CO3 2 2 2 1 2 2 2 3 1 1 1
CO4 3 2 3 2 1 3 3 2 3 1
CO5 3 3 3 3 2 3 3 3 3 3 3 3
CO6 1 2 1 3 2 2 1 1
CO->PSO MAPPING - 04CH6216 - Environmental Nanotechnology
CO1
CO2
CO3
CO4
CO5
CO6
COURSE->PO MAPPING - 04CH6216 - Environmental Nanotechnology
04CH6216/PO
3 3 3 3 2 3 3 3 3 3 3 3
COURSE->PSO MAPPING - 04CH6216 - Environmental Nanotechnology
PSO1 PSO2 PSO3

04CH6216/PSO
AJCE 315
CHE
04CH6292
04CH6292 Design Project 0-0-4:2 2020
No. Course Outcome - 04CH6292 - Design Project Target
Learn the design approaches of treatment systems for water/wastewater/solid waste/air /noise
CO1 60%
pollution
CO2 Identify a relevant environmental engineering design problem 60%
CO3 Carry out complete design of a particular treatment system for environmental pollution control 60%
CO4 Develop the complete design with calculations, detailed drawings, and estimation of quantities 60%
Ability to design (independently or in a team) suitable treatment systems for control of environmental
CO5 60%
pollution
CO6 Develop better communication and presentation skills 60%
COURSE END SURVEY - 04CH6292 - Design Project
To what extent are you able to learn the design approaches of treatment systems for water/wastewater/solid
waste/air /noise pollution?
CO1
To what extent are you able to identify a relevant environmental engineering design problem?
CO2
To what extent are you able to carry out complete design of a particular treatment system for environmental
pollution control?
CO3
To what extent are you able to develop the complete design with calculations, detailed drawings, and
estimation of quantities?
CO4
To what extent are you able to design (independently or in a team) suitable treatment systems for control of
environmental pollution?
CO5
To what extent are you able to develop better communication and presentation skills?
CO6
CO->PO MAPPING - 04CH6292 - Design Project
AJCE 316
CHE
CO1 3 3 3 1 3 3 3 1 3 1 3
CO2 3 3 3 1 3 3 3 1 3 1 3
CO3 3 3 3 1 3 3 3 1 3 1 3
CO4 3 3 3 1 3 3 3 1 3 1 3
CO5 3 3 3 1 3 3 3 1 3 1 3
CO6 3 3 3 1 3 3 3 1 3 1 3
CO->PSO MAPPING - 04CH6292 - Design Project
CO1 1 3 3
CO2 1 3 3
CO3 1 3 3
CO4 1 3 3
CO5 1 3 3
CO6 1 3 3
COURSE->PO MAPPING - 04CH6292 - Design Project
04CH6292/PO
3 3 3 1 3 3 3 1 3 1 3
COURSE->PSO MAPPING - 04CH6292 - Design Project
PSO1 PSO2 PSO3

04CH6292/PSO
1 3 3
04CH6294
04CH6294 ENVIRONMENTAL ANALYSIS LAB-II 0-0-2:1 2020
No. Course Outcome - 04CH6294 - ENVIRONMENTAL ANALYSIS LAB-II Target
CO1 Carry out grab and composite sampling for water and wastewater analysis 60%
Analyze the physical characteristics of water/wastewater such as solids, turbidity and electrical
CO2 conductivity 60%
CO3 Determine the concentration of various ions present in the water sample 60%
CO4 Analyze the BOD of wastewater sample 60%
AJCE 317
CHE
CO5 Analyze the COD of wastewater sample 60%
CO6 Estimate the organic content, chloride, sulphate, pH and conductivity of soil sample 60%
COURSE END SURVEY - 04CH6294 - ENVIRONMENTAL ANALYSIS LAB-II
To what extent are you able to carry out grab and composite sampling for water and wastewater analysis?
CO1
To what extent are you able to analyze the physical characteristics of water/wastewater such as solids,
turbidity and electrical conductivity?
CO2
To what extent are you able to determine the concentration of various ions present in the water sample?
CO3
To what extent are you able to analyze the BOD of wastewater sample?
CO4
To what extent are you able to analyze the COD of wastewater sample?
CO5
To what extent are you able to estimate the organic content, chloride, sulphate, pH and conductivity of soil
sample?
CO6
CO->PO MAPPING - 04CH6294 - ENVIRONMENTAL ANALYSIS LAB-II
CO1 3 3 3 1 2 3 1 2 1
CO2 2 2 3 1 3 1 2 1
CO3 2 2 3 1 3 1 2 1
CO4 2 2 3 1 3 1 2 1
CO5 2 2 3 1 3 1 2 1
CO6 2 2 3 1 3 1 2 1
CO->PSO MAPPING - 04CH6294 - ENVIRONMENTAL ANALYSIS LAB-II
CO1 1 3 3
CO2 3 3
CO3 3 3
AJCE 318
CHE
CO4 3 3
CO5 3 3
CO6 3 3
COURSE->PO MAPPING - 04CH6294 - ENVIRONMENTAL ANALYSIS LAB-II
04CH6294/PO
3 3 3 1 2 3 1 2 1
COURSE->PSO MAPPING - 04CH6294 - ENVIRONMENTAL ANALYSIS LAB-II
PSO1 PSO2 PSO3

04CH6294/PSO
1 3 3
SEMESTER-3
04CH7203
04CH7203 ENVIRONMENTAL GEOTECHNOLOGY 3-0-0:3 2020
No. Course Outcome - 04CH7203 - ENVIRONMENTAL GEOTECHNOLOGY Target
CO1 Classify the different soil pollutants, and identify the factors affecting behavior of pollutants in soil 60%
Evaluate the site selection, characterization and stability of landfills, and understand the different
CO2 60%
mechanisms involved in waste stabilization
Understand the various processes affecting contaminant transport in sub surface, ways to protect
CO3 60%
aquifers from pollution
CO4 Characterize the contaminated soil for engineering purposes 60%
CO5 Choose suitable technology for remediation of contaminated sites 60%
CO6 Familiarize the advanced methods in environmental geotechnology 60%
COURSE END SURVEY - 04CH7203 - ENVIRONMENTAL GEOTECHNOLOGY
CO1 CO2
CO3 CO4
CO5 CO6
CO->PO MAPPING - 04CH7203 - ENVIRONMENTAL GEOTECHNOLOGY
AJCE 319
CHE
CO1 2 1 2 3 2 3 3 1 1
CO2 2 1 3 3 2 3 1 2
CO3 2 1 3 3 2 3 1 2
CO4 2 1 3 3 2 3 1 2
CO5 2 1 3 3 2 3 1 1
CO6 2 1 3 3 2 3 1 1
CO->PSO MAPPING - 04CH7203 - ENVIRONMENTAL GEOTECHNOLOGY
CO1
CO2
CO3
CO4
CO5
CO6
COURSE->PO MAPPING - 04CH7203 - ENVIRONMENTAL GEOTECHNOLOGY
04CH7203/PO
2 1 2 3 3 3 3 1 2
COURSE->PSO MAPPING - 04CH7203 - ENVIRONMENTAL GEOTECHNOLOGY
PSO1 PSO2 PSO3

04CH7203/PSO
04CH7291
04CH7291 SEMINAR-II 0-0-2:2 2020
No. Course Outcome - 04CH7291 - SEMINAR-II Target
CO1 Acquire knowledge on latest developments on a specific area of interest 60%
CO2 Logically connect the works done by different authors in the same area 60%
CO3 Understand the gaps in literature on a specific topic 60%
CO4 Identify research works that could be done in the immediate future 60%
CO5 Write report and make presentations on the area studied 60%
AJCE 320
CHE
COURSE END SURVEY - 04CH7291 - SEMINAR-II
To what extent could you acquire knowledge on latest developments on a specific area of interest
CO1
To what extent could you logically connect the works done by different authors in the same area
CO2
To what extent could you understand the gaps in literature on a specific topic
CO3
To what extent could you identify research works that could be done in the immediate future
CO4
To what extent could you write report and make presentations on the area studied
CO5
CO->PO MAPPING - 04CH7291 - SEMINAR-II
CO1
CO2
CO3
CO4
CO5
CO->PSO MAPPING - 04CH7291 - SEMINAR-II
CO1
CO2
CO3
CO4
CO5
COURSE->PO MAPPING - 04CH7291 - SEMINAR-II
04CH7291/PO
COURSE->PSO MAPPING - 04CH7291 - SEMINAR-II
PSO1 PSO2 PSO3

04CH7291/PSO
AJCE 321
CHE
04CH7293
04CH7293 PROJECT (PHASE-I) 0-0-12:6 2020
No. Course Outcome - 04CH7293 - PROJECT (PHASE-I) Target
CO1 Review literature to find feasible solutions for a problem 60%
CO2 Systematically analyse a problem and develop objective statements 60%
CO3 Develop a scientific method to reach an objective 60%
CO4 Communicate and convince others on the method of achieving an objective 60%
CO5 Properly document a work plan/work report 60%
COURSE END SURVEY - 04CH7293 - PROJECT (PHASE-I)
To what extent are you capable to review literature to find feasible solutions for a problem?
CO1
To what extent are you capable to systematically analyse a problem and develop objective statements
CO2
To what extent are you capable to develop a scientific method to reach an objective
CO3
To what extent are you capable to communicate and convince others on the method of achieving an
objective
CO4
To what extent are you capable to properly document a work plan / report
CO5
CO->PO MAPPING - 04CH7293 - PROJECT (PHASE-I)
CO1
CO2
CO3
CO4
AJCE 322
CHE
CO5
CO->PSO MAPPING - 04CH7293 - PROJECT (PHASE-I)
CO1
CO2
CO3
CO4
CO5
COURSE->PO MAPPING - 04CH7293 - PROJECT (PHASE-I)
04CH7293/PO
COURSE->PSO MAPPING - 04CH7293 - PROJECT (PHASE-I)
PSO1 PSO2 PSO3

04CH7293/PSO
04CH7213
04CH7213 LIFECYCLE ASSESMENT 3-0-0:3 2020
No. Course Outcome - 04CH7213 - LIFECYCLE ASSESMENT Target
To provide the student with knowledge about a framework for evaluation of the environmental
CO1 65%
footprint of various systems and technologies.
CO2 To provide the student with knowledge about qualitative and quantitative methods for LCA 65%
To provide the student with knowledge about mathematical structure of LCA and modeling of
CO3 65%
Production Systems
To Apply Life Cycle Assessment on various energy, product and transport technologies and
CO4 65%
systems.
CO5 To Perform Robust Assessments of the Environmental Characteristics of Systems 65%
CO6 To Assess the Environmental Performance of Energy and Production Systems 65%
COURSE END SURVEY - 04CH7213 - LIFECYCLE ASSESMENT
Will you be able to evaluate the environmental footprint of various systems

CO1
AJCE 323
CHE
Will you be able to select the appropriate LCA method

CO2
Do you agree that you can model a production system

CO3
What is your understanding on application of LCA on energy products

CO4
What is your confidence in carrying out assessments

CO5
Do you agree that you can assess Energy and Production Systems
CO6
CO->PO MAPPING - 04CH7213 - LIFECYCLE ASSESMENT
CO1 2 1 1 3 1 1 2 2 1 1 1 2
CO2 3 1 2 3 1 1 2 1 1 1 1
CO3 2 1 2 3 2 1 2 1 1 1 1
CO4 3 3 3 3 1 1 2 1 2 1 2
CO5 3 3 3 3 1 1 1 1 2 1 1
CO6 3 2 3 3 1 1 1 1 2 1 1 1
CO->PSO MAPPING - 04CH7213 - LIFECYCLE ASSESMENT
CO1 1 1 1
CO2 1 2 1
CO3 1 2 2
CO4 1 1 3
CO5 1 2 3
CO6 1 2 3
COURSE->PO MAPPING - 04CH7213 - LIFECYCLE ASSESMENT
04CH7213/PO
3 3 3 3 2 1 2 2 2 1 1 2
COURSE->PSO MAPPING - 04CH7213 - LIFECYCLE ASSESMENT
AJCE 324
CHE
PSO1 PSO2 PSO3

04CH7213/PSO
1 2 3
PhD-PHD CH
AJCE 325
CHE
CONTINUOUS IMPROVEMENT IMPLEMENTED
Measures identified & Implemented Via AddOn, Bridge, MOOC, Conference, Workshop, Internship & Project
No Course Type
1 Honours Course-S4 Honours Course
2 Honour's Course-S6 Honours Course
3 S7 CHEMICAL HONOURS Honours Course
4 Bioprocess Engineering Honours Course
5 COMPOSITE MATERIALS Honours Course
6 S5 Chemical Honours Honours Course
7 S7 CH Honours Course
8 Process Integration Honours Course
9 Safety Engineering of Process Plants Minor Course
Honours Course-S4
Type: Honours Course
Details Honours Course S4-chemical Engineering
Mode of Instruction: Fully Online Instruction, Lecture
Dr. J R Anoop Raj

Staff(s) Associated
Dr. David K Daniel
Course(s) Associated CHT294 - INSTRUMENTAL METHODS FOR ENVIRONMENTAL ENGINEERING
Honour's Course-S6
One Elective which is not offered to regular students of ChE from the Elective list in the 6TH
Details
Semester ChE curriculum is offered for the B. Tech. Honour's Students
Mode of
Fully Online Instruction, Lecture
Instruction:
Staff(s) Dr. J R Anoop Raj

Associated Dr. David K Daniel
Course(s)
CH374 - Process Design for Pollution Control
Associated
S7 CHEMICAL HONOURS
AJCE 326
CHE
Details Enzyme Engineering (CH463)
Mode of Instruction: Fully Online Instruction, Online Live Class, Online Resources
Staff(s) Associated Dr. David K Daniel
Course(s) Associated CH463 - Enzyme Engineering
Bioprocess Engineering
Details S6 Chemical Engineering
Mode of Instruction: Discussion, Lecture, Question and Answer, Seminar
Staff(s) Associated Dr. Vishnu M
Course(s) Associated CH364 - Bioprocess Engineering
COMPOSITE MATERIALS
Details Course Objective To impart the basic concepts of composite materials
Mode of Computer Aided Presentation, Direct Instruction, Discussion, Examination, Fully Online Instruction,
Instruction: Group Activities, Lecture, Self learning
Staff(s)
Rijin M D Tom
Associated
Course(s)
CH466 - Composite Materials
Associated
S5 Chemical Honours
M.Tech Elective O4CH7101 - Self-assembling nanostructured molecular materials and

Details
devices
Mode of Instruction: Discussion, Lecture, Question and Answer, Self learning
Staff(s) Associated Dr. Abhinav K Nair
Course(s)
04CH7101 - Self Assembling nanostructured molecular materials and devices
Associated
S7 CH
Details Honours Course
AJCE 327
CHE
Mode of Instruction: Lecture
Dr. David K Daniel

Staff(s) Associated
Rana Prathapan A.D
Course(s) Associated CH463 - Enzyme Engineering
Process Integration
Details S8 Honours
Mode of Instruction: Lecture
Staff(s) Associated Dr. Kusumita Dutta
Course(s) Associated CH472 - Process Integration
Safety Engineering of Process Plants
Type: Minor Course
Details Safety Engineering of Process Plants
Mode of Instruction:
Staff(s) Associated Rijin M D Tom
Course(s) Associated CHT282 - Safety Engineering of Process Plants
AJCE 328

Chemical Engineering: Outcome Based Education Scheme

Uploaded by

Copyright:

Available Formats

Chemical Engineering: Outcome Based Education Scheme

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Chemical Engineering: Outcome Based Education Scheme

Uploaded by

Copyright:

Available Formats

CHE

AFFILIATED TO APJ ABDUL KALAM TECHNOLOGICAL UNIVERSITY, KERALA

Outcome Based Education Scheme

1. OBE IMPLEMENTATION PLAN

4. PROGRAM OUTCOME (PO)

5. PROGRAM EDUCATIONAL OBJECTIVE (PEO)

6. PROGRAM SPECIFIC OUTCOME (PSO)

7. COMPETENCIES & PERFORMANCE INDICATORS (CA & PI)

8. BLOOM'S TAXONOMY FOR ASSESSMENT DESIGN

9. TEACHING - LEARNING STRATEGIES

10. PO-CA-PI MAPPING SUMMARY

11. PEO-PO MAPPING

12. PEO-MISSION MAPPING

13. PROGRAM EXIT SURVEY

14. ALUMNI SURVEY

15. EMPLOYER SURVEY

16. COURSE OUTCOMES

17. COURSE END SURVEY

18. CO- PO MAPPING

19. CO- PSO MAPPING

20. COURSE – PO MAPPING

21. COURSE – PSO MAPPING

22. CONTINUOUS IMPROVEMENT IMPLEMENTED

Conduct investigations of nanomaterials using various advanced characterization techniques, analyze

PO11 Commit to professional and ethical responsibilities as an engineer.

PO2 An ability to write and present a substantial technical report/document.

PO4 Apply the knowledge of environmental sciences to solve engineering problems.

PO11 Commit to professional and ethical responsibilities as an engineer.

PROGRAM EDUCATIONAL OBJECTIVE

PEO2 To provide solutions to environmental problems by applying acquired engineering knowledge.

PROGRAM SPECIFIC OUTCOME

To gain fundamental knowledge in the concepts of environmental pollution control strategies to

COMPETENCIES & PERFORMANCE INDICATORS

1.1 Demonstrate competence in mathematical modelling

1.2 Demonstrate competence in basic sciences

1.2.1 Apply laws of natural science to an engineering problem

1.3 Demonstrate competence in engineering fundamentals

1.3.1 Apply fundamental engineering concepts to solve engineering problems

1.4 Demonstrate competence in specialized engineering knowledge to the program

1.4.1 Apply engineering concepts to solve engineering problems

2.1 Demonstrate an ability to identity and formulate complex engineering problem

2.1.1 Articulate problem statements and identify objectives

2.2.1 Reframe complex problems into Interconnected sub-problems

2.2.2 Identify assemble and evaluate information and resources

2.3 Demonstrate an ability to formulate and interpret a model

2.4 Demonstrate an ability to execute a solution process and analyze results

2.4.1 Apply engineering mathematics and computations to solve mathematical models

3.1 Demonstrate an ability to define a complex open-ended problem in engineering terms

3.1.1 Recognize that need analysis is key to good problem definition

3.1.2 Elicit and document, engineering requirements from stakeholders

3.1.3 Synthesize engineering requirements from a review of the state-of-the-art

3.1.6 Determine design objectives, functional requirements and arrive at specifications

3.2 Demonstrate an ability to generate a diverse set of alternative design solutions

3.2.2 Build models/prototypes to develop a diverse set of design solutions

3.4 Demonstrate an ability to advance an engineering design to defined end state

4.2 Demonstrate an ability to design experiments to solve open-ended problems

4.3 Demonstrate an ability to analyze data and reach a valid conclusion

5.2.2 Demonstrate proficiency in using discipline-specific tools

5.3.1 Discuss limitations and validate tools, techniques and resources