WDM Concept and

Components
SEMESTER-06
Part 1: WDM Concept
Evolution of the Technology
 Why WDM?
• Capacity upgrade of existing fiber networks
(without adding fibers)
• Transparency: Each optical channel can
carry any transmission format (different
asynchronous bit rates, analog or digital)
• Scalability– Buy and install equipment for
additional demand as needed
• Wavelength routing and switching:
Wavelength is used as another dimension to
time and space
 Wavelength Division Multiplexing

Each wavelength is like a separate channel

(fiber)
 Ex: SONET

TDM Vs WDM
 Wavelength Division Multiplexing

• Passive/active devices are needed to

combine, distribute, isolate and amplify
optical power at different wavelengths
 WDM, CWDM and DWDM
• WDM technology uses multiple wavelengths to
transmit information over a single fiber
• Coarse WDM (CWDM) has wider channel spacing
(20 nm) – low cost
• Dense WDM (DWDM) has dense channel spacing
(0.8 nm) which allows simultaneous
transmission of 16+ wavelengths – high capacity

 WDM and DWDM
• First WDM networks used just two wavelengths,
1310 nm and 1550 nm
• Today's DWDM systems utilize 16, 32,64,128 or more
wavelengths in the 1550 nm window
• Each of these wavelength provide an independent
channel (Ex: each may transmit 10 Gb/s digital or
SCMA analog)
• The range of standardized channel grids includes 50,
100, 200 and 1000 GHz spacing
• Wavelength spacing practically depends on:
– laser linewidth
– optical filter bandwidth
ITU-T Standard Transmission DWDM windows

 c 
   2  
 
 Principles of DWDM
• BW of a modulated laser: 10-50 MHz  0.001 nm
• Typical Guard band: 0.4 – 1.6 nm
• 80 nm or 14 THz @1300 nm band
• 120 nm or 15 THz @ 1550 nm
• Discrete wavelengths form individual channels that
can be modulated, routed and switched individually
• These operations require variety of passive and active
devices
 c 
   2   Ex. 10.1
 
Nortel OPTERA 640 System

64 wavelengths each carrying 10 Gb/s

 DWDM Limitations
Theoretically large number of channels can
be packed in a fiber
For physical realization of DWDM
networks we need precise wavelength
selective devices
Optical amplifiers are imperative to
provide long transmission distances
without repeaters
Part II: WDM Devices
 Key Components for WDM
Passive Optical Components
• Wavelength Selective Splitters
• Wavelength Selective Couplers
Active Optical Components
• Tunable Optical Filter
• Tunable Source
• Optical amplifier
• Add-drop Multiplexer and De-multiplexer
Photo detector Responsivity
Photo detectors are
sensitive over wide
spectrum (600 nm).
Hence, narrow optical
filters needed to
separate channels
before the detection
in DWDM systems
 Passive Devices
• These operate completely in the optical
domain (no O/E conversion) and does not
need electrical power
• Split/combine light stream Ex: N X N couplers,
power splitters, power taps and star couplers
• Technologies: - Fiber based or
– Optical waveguides based
– Micro (Nano) optics based
• Fabricated using optical fiber or waveguide
(with special material like InP, LiNbO3)
Filter, Multiplexer and Router
 Basic Star Coupler
May have N inputs and M outputs

• Can be wavelength selective/nonselective

• Up to N =M = 64, typically N, M < 10
 Fused-Biconical coupler OR

Directional coupler

• P3, P4 extremely low ( -70 dB below Po)

• Coupling / Splitting Ratio = P2/(P1+P2)
• If P1=P2  It is called 3-dB coupler
 Fused Biconical Tapered Coupler
• Fabricated by twisting together, melting and
pulling together two single mode fibers
• They get fused together over length W;
tapered section of length L; total draw length
= L+W
• Significant decrease in V-number in the
coupling region; energy in the core leak out
and gradually couples into the second fibre
 Definitions
S p li tti n g ( C o u p li n g ) R at i o = P 2 ( P1  P2 )

E x c es s L o s s = 1 0 L o g [ P0 ( P1  P2 ) ]

I n s ert i o n L o s s = 1 0 L o g [ Pi n Po u t ]

C ro s s talk = 1 0 L o g ( P 3 P 0 )
Try Ex. 10.2
 P1  P0 cos 2 ( z )

P2  P0 sin 2 ( z )

Coupler
characteristics

: Coupling Coefficient
 Coupler Characteristics
• power ratio between both output can be
changed by adjusting the draw length of a simple
fused fiber coupler

• It can be made a WDM de-multiplexer:
• Example, 1300 nm will appear output 2 (p2) and 1550 nm
will appear at output 1 (P1)
• However, suitable only for few wavelengths that are far
apart, not good for DWDM

 Wavelength Selective Devices
These perform their operation on the incoming
optical signal as a function of the wavelength
Examples:
• Wavelength add/drop multiplexers
• Wavelength selective optical
combiners/splitters
• Wavelength selective switches and routers
 Fused-Fiber Star Coupler

Splitting Loss = -10 Log(1/N) dB = 10 Log (N) dB

Excess Loss = 10 Log (Total Pin/Total Pout)
Fused couplers have high excess loss
 8x8 bi-directional star coupler by cascading 3
stages of 3-dB Couplers
1, 2 1, 2 5, 6

1, 2 3, 4 7, 8

N (12 = 4 X 3)
N u m b er o f 3 - d B C o u p lers N c = lo g 2 N
2 Try Ex. 10.5
Fiber Bragg Grating
 Fiber Bragg Grating
• This is invented at Communication Research
Center, Ottawa, Canada
• The FBG has changed the way optical
filtering is done
• The FBG has so many applications
• The FBG changes a single mode fiber (all
pass filter) into a wavelength selective filter
 Fiber Brag Grating (FBG)
• Basic FBG is an in-fiber passive optical band
reject filter
• FBG is created by imprinting a periodic
perturbation in the fiber core
• The spacing between two adjacent slits is called
the pitch
• Grating play an important role in:
– Wavelength filtering
– Dispersion compensation
– Optical sensing
– EDFA Gain flattening
– Single mode lasers and many more areas
 Bragg Grating formation

2  sin(  / 2 )  uv
 FBG Theory
Exposure to the high intensity UV radiation
changes the fiber core n(z) permanently as a
periodic function of z
n( z)  n core  n [1  cos( 2 z /  )]

z: Distance measured along fiber core axis

: Pitch of the grating
ncore: Core refractive index
δn: Peak refractive index
Reflection at FBG
Simple De-multiplexing Function

R ef lec ted W av elen g th   2 n

B eff

Peak Reflectivity Rmax = tanh2(kL)

Wavelength Selective DEMUX
 Dispersion Compensation

Longer wavelengths
take more time

Reverse the operation of

dispersive fiber
Shorter wavelengths
take more time
 ADD/DROP MUX

FBG Reflects in both directions; it is bidirectional

Extended Add/Drop Mux
 FBG for DFB Laser

• Only one wavelength gets positive feedback 

single mode Distributed Feed Back laser
Advanced Grating Profiles
 FBG Properties
Advantages
• Easy to manufacture, low cost, ease of coupling
• Minimal insertion losses – approx. 0.1 db or less
• Passive devices

Disadvantages
• Sensitive to temperature and strain.
• Any change in temperature or strain in a FBG causes the
grating period and/or the effective refractive index to change,
which causes the Bragg wavelength to change.
neff neff
neff  T  
T 
Unique Application of FBG
Resonance Cavity with FBG
Transmission Characteristics
Experimental Set-Up
• What is the wavelength separation
when RF separation 50 MHz?
Interferometers
 Interferometer
An interferometric device uses 2 interfering paths of
different lengths to resolve wavelengths
Typical configuration: two 3-dB directional couplers
connected with 2 paths having different lengths

Applications:
— wideband filters (coarse WDM) that separate signals
at1300 nm from those at 1550 nm
— narrowband filters: filter bandwidth depends on the
number of cascades (i.e. the number of 3-dB couplers
connected)

Basic Mach-Zehnder Interferometer

Phase shi of the propagating wave increases with L,

Constructive or destructive interference depending on L
 Mach-Zehnder Interferometer
Phase shi at the output due to the propagation
path length difference:
2  n eff
  L


If the power from both inputs (at different
wavelengths) to be added at output port 2, then,
1 1 
  2  n eff    L
 1 2 

Try Ex. 10-6
 Four-Channel Wavelength Multiplexer

• By appropriately selecting ΔL, wavelength

multiplexing/de-multiplexing can be
achieved
MZI- Demux Example
Arrayed Wave Guide Filters

Each waveguide has

slightly different length
 Phase Array Based WDM Devices
• The arrayed waveguide is a generalization
of 2x2 MZI multiplexer
• The lengths of adjacent waveguides differ
by a constant L
• Different wavelengths get multiplexed
(multi-inputs one output) or de-
multiplexed (one input multi output)
• For wavelength routing applications multi-
input multi-output routers are available
 Diffraction Gratings
source impinges on a diffraction grating ,each wavelength
is diffracted at a different angle

Using a lens, these wavelengths can be focused onto
individual fibers.
Less channel isolation between closely spaced wavelengths.


Generating Multiple Wavelength for
WDM Networks
• Discrete DFB lasers
– Straight forward stable sources, but
expensive
• Wavelength tunable DFB lasers
• Multi-wavelength laser array
– Integrated on the same substrate
– Multiple quantum wells for better
optical and carrier confinement
• Spectral slicing – LED source and comb
filters
Discrete Single-Wavelength Lasers
• Number of lasers into simple power coupler;
each emit one fixed wavelength
• Expensive (multiple lasers)
• Sources must be carefully controlled to avoid
wavelength dri
 Frequency Tuneable Laser
• Only one (DFB or DBR) laser that has grating
filter in the lasing cavity
• Wavelength is tuned by either changing the
temperature of the grating (0.1 nm/OC)
• Or by altering the injection current into the
passive section (0.006 nm/mA)
• The tuning range decreases with the optical
output power

Tunable Laser Characteristics

Typically, tuning range 10-15 nm,

Channel spacing = 10 X Channel width
 Tunable Filters
• Tunable filters are made by at least one branch
of an interferometric filter has its
– Propagation length or
– Refractive index altered by a control mechanism
• When these parameters change, phase of the
propagating light wave changes (as a function of
wavelength)
• Hence, intensity of the added signal changes (as
a function of wavelength)
• As a result, wavelength selectivity is achieved
Tunable Optical Filters
 Tuneable Filter Considerations
• Tuning Range (Δν): 25 THz (or 200nm) for the
whole 1330 nm to 1500 nm. With EDFA
normally Δλ = 35 nm centered at 1550 nm
• Channel Spacing (δν): the min. separation
between channels selected to minimize
crosstalk (30 dB or better)
• Maximum Number of Channels (N = Δν/ δν):
• Tuning speed: Depends on how fast
switching needs to be done (usually
milliseconds)
 Issues in WDM Networks
• Nonlinear inelastic scattering processes due
to interactions between light and molecular
or acoustic vibrations in the fibre
– Stimulated Raman Scattering (SRS)
– Stimulated Brillouin Scattering (SBS)
• Nonlinear variations in the refractive index
due to varying light intensity
– Self Phase Modulation (SPM)
– Cross Phase Modulation (XPM)
– Four Wave Mixing (FWM)

 Summary
• DWDM plays an important role in high capacity
optical networks
• Theoretically enormous capacity is possible
• Practically wavelength selective (optical signal
processing) components and nonlinear effects limit
the performance
• Passive signal processing elements like FBG, AWG are
attractive
• Optical amplifications is imperative to realize DWDM
networks