SAFETY DATA SHEET PENTENS T-200

Section 1: Identification

1.1 Chemicals name: Heating Resistant Waterproofing Coating

1.2 Other name (product codes): PENTENS T-200

1.3 Recommended use and --

restrictions on use:

1.4 Details of the supplier of the Company Name & Address

safety data sheet: UFON Nano-Chemical Corp.
No.36, Lane 105, Chengfu Rd, Sansia Township, Taipei County 23743, Taiwan
(R.O.C.)

Contact Number
+886 02 2668 2003

1.5 Emergency contact phone Tel: +886 02 2668 2003 Fax: +886 02 2668 1546
numbers/fax numbers:

Section 2: Hazard(s) Identification

2.1 Chemicals hazard class: Skin corrosion/irritation: Category3

Serious eye damage/eye irritation: Category 2B

2.2 Label content: Hazard pictogram: --

Signal Words: Warning

Hazard Statements: H316 Causes mild skin irritation.

H320 Causes eye irritation.

Precautionary statements: P264 Wash hands thoroughly after

handling.

2.3 Other hazards: If prolonged skin contact may produce redness.

If not carefully ingested, the stomach will produce irritation.

Section 3: Composition/Information on Ingredients

3.1 Mixtures:

Chemical properties:
Chinese and English names of the Concentration or concentration ranges CAS-No
hazardous ingredients (ingredient percentage)
Water 38.5% 7732-18-5
Butyl acrylate, 2-hydroxyethyl acrylate, 19.5% 26061-99-4
styrene, acrylic acid, methyl methacrylate
polymer

PSDS T-200 01/20_V1 PAGE 1

SAFETY DATA SHEET PENTENS T-200

Ethylene Vinyl Acetate Copolymer 21.2% 24937-78-8

Titanium dioxide 3.5% 13463-67-7
Silica amorphous 0.8% 7631-86-9
triiron tetraoxide 0.2% 1317-61-9
C.I. Pigment yellow 151 0.1% 31837-42-0
Calcium carbonate 16% 471-34-1
Hydrotreated light paraffinic 0.2% 64742-55-8

Section 4: First-aid Measures

4.1 The first aid measures for Inhalation:

different exposure routes: Before doing rescuing, rescuers should wear appropriate personal protections
to ensure their safety.
Quick removal from the contaminated area is most important. Unconscious
persons should be move to an uncontaminated area. If breathing has
stopped, start giving mouth-mouth resuscitation and supplemental oxygen.
If there is no pulse, give cardiopulmonary resuscitation (CPR) and seek
immediate medical advice.

Skin contact:
Remove contaminated clothing and shoes as rapidly as possible. Flush
affected area with copious quantities of water using soap if available. Get
medical attention if irritation persists. Contaminated clothing should be
cleaned and discarded.

Eye contact:
Immediately flush eyes with lukewarm water for at least 20 minutes, keeping
eyelids apart and away from eyeballs during irrigation. Get competent
medical attention immediately.

Ingestion:
Never give anything by mouth to a victim who is unconscious or is having
convulsions. Give a victim water to rinse the mouth or give large amounts of
water to dilute, if a victim is conscious. Do not induce vomiting. If vomiting
spontaneously occurs, keep the victim’s head below the hips to prevent
aspiration into the lungs. Consult a physician immediately.

Section 5: Fire-fighting Measures

5.1 Suitable fire extinguishing Carbon dioxide, dry chemical powder, foam.
media:

5.2 Specific hazards may be --

encountered during fire-
fighting:

5.3 Specific fire-fighting methods: --

5.4 Specific equipment for the The fire fighters must use respirators, special protective clothing and
protection of firefighters: protective gloves.

PSDS T-200 01/20_V1 PAGE 2

SAFETY DATA SHEET PENTENS T-200
Section 6: Accidental Release Measures

6.1 Personal precautions: Before the contaminated area has not been fully cleaned, restricted from
approaching the area.
Confirmation is responsible for clean-up work by trained personnel.
Wear appropriate protective clothing.

6.2 Environmental precautions: Ventilate area to dispel any residual vapors.

Eliminate all sources of ignition.
Try to prevent the material from entering drains or water courses.

6.3 Methods for cleaning up: If safety allows, stop or reduce the leakage.
Stable and inflammable materials such as sands or soil to stop leakage.
Use water to wash the area, when the leakage is in a small amount.
Call the emergency center or suppliers to help, when the leakage is in a
large amount.

Section 7: Handling and Storage

7.1 Handling: Keeping walkways and exit unhindered.

Wear appropriate when necessary personal protective equipment to avoid
contact with the chemicals or equipment contaminated.
Do not use contaminated liquid back to the original storage container.
Containers holding tightly when not in use and avoid damage.

7.2 Storage: Storage area should be: cool, dry, well ventilated, out of direct sunlight.
Store away from sources of heat or ignition.
Storage containers regularly check for damage or spills.

Section 8: Exposure Controls/personal Protection

8.1 Engineering control: --

8.2 Control parameters: 8 hours time weighted average --

exposure limits/Short-term
exposure limits/maximum
exposure limits:

Biological standards: --

8.3 Personal protective Respiratory protection: Suitable breathing mask when there
equipment: is inadequate ventilation.

Hand protection: Suitable protective gloves.

Eye protection: Protective goggles.

Skin and body protection: Suitable protective clothes.

8.4 Hygienic measures: Avoid contact with skin, eyes and clothing. Ensure adequate ventilation,
especially in confined areas. When using, do not eat, drink or smoke. Handle
in accordance with good industrial hygiene and safety practice.

PSDS T-200 01/20_V1 PAGE 3

SAFETY DATA SHEET PENTENS T-200
Section 9: Physical and Chemical Properties

Appearance: Gray, Liquid Odor: Mild taste

Odor threshold: Not applicable Melting point: Not applicable
PH value: 7~8 Boiling point/boiling Not applicable
point range:
Decomposition Not applicable Flash point: Not applicable
temperature:
Auto-ignition Not applicable Explosion limits: Not applicable
temperature:
Vapor pressure: Not applicable Vapor density: Not applicable
Density: Not applicable Solubility: Soluble in water
Partition coefficient Not applicable Evaporation rate: Not applicable
(n-octane/water, log
Kow):
Test method: Open cup ( )
Closed cup ( )

Section 10: Stability and Reactivity

10.1 Stability: Stable.

10.2 Possible hazardous reactions --

under specific conditions:

10.3 Condition to avoid: Electrostatic/spark/flame/other ignition sources.

10.4 Materials to avoid: Strong oxidizer/Strong reducing agent.

10.5 Hazardous decomposition Thermal decomposition of CO/CO².

products:

Section 11: Toxicological Information

11.1 Routes of exposure: Inhalation/skin contact/eye contact/ingestion.

11.2 Symptoms: Eye Irritation: Cause burns, the risk of serious eye
injury.

Skin Irritation: Cause burns.

Ingestion: There burns the risk of mouth and

throat mucosa.

Inhalation: --

PSDS T-200 01/20_V1 PAGE 4

SAFETY DATA SHEET PENTENS T-200
11.3 Acute toxicity: --

11.4 Chronic toxicity or long term Repeated or prolonged exposure may cause irritation or dermatitis.
toxicity:

Section 12: Ecological Information

12.1 Ecotoxicity: This product may cause environmental pollution.

12.2 Persistence and degradability: --

12.3 Bioaccumulative potential: --

12.4 Mobility in soil: --

12.5 Other adverse effects: --

Section 13: Disposal Considerations

13.1 Methods of waste disposal: Refer to relevant laws and regulations.

Conform to storage conditions to storage the disposal waste.
Use the specific method of incineration or sanitary landfill treatment.

Section 14: Transport Information

14.1 United Nations number (UN Non- Regulated.

No):

14.2 UN proper shipping name: Non- Regulated.

14.3 Transport hazard class(es): Non- Regulated.

14.4 Packing group: Non- Regulated.

14.5 Marine pollutant (yes/no): Non- Regulated.

14.6 Specific transport measures Non- Regulated.

and precautionary conditions:

Section 15: Regulatory Information

15.1 Applicable regulations: Rules of labor safety and sanitation.

Road traffic safety rules.
Regulation of dangerous and harmful materials.

PSDS T-200 01/20_V1 PAGE 5

SAFETY DATA SHEET PENTENS T-200
Section 16: Other Information

16.1 Literature references: Material safety data sheets provided by the supplier.
Example of GHS safety data sheet from Council of Labor Affairs

16.2 Organization that prepared Name:

the MSDS UFON Nano-Chemical Corp.

Address & Tel:

No.36, Lane 105, Chengfu Rd, Sansia Township, Taipei County 23743,
Taiwan (R.O.C.) Tel: +886 02 2668 2003

16.3 Person who prepared the Title:

MSDS QA Section, Section Manager

Name(signature):
Ben Chuang

16.4 Date that the MSDS was 12 April, 2019

prepared:

UFON the above information has been sought to correct the data and information are for reference only, the user requests according to application
needs, determine the availability of its own. The material safety data sheet is based on our existing knowledge and experience in the preparation
of, and only describes the product-related safety requirements and does not relate to the characteristics of products (special performance). So for
any of this material safety data sheet pushed by special-purpose performance characteristics of any consistency or product does not guarantee the
applicability. The consignee to accept this product, should bear the obligation to comply with existing regulations and the Ordinance.

PSDS T-200 01/20_V1 PAGE 6