MULTI-Yanmar Mecc Alte

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

◼ Model:TN9-R4000-Y

Powered by YANMAR 3TNV76

◼ Generator Specification
Service PRP(1) ESP(2) Performance Data
Genset power (KW) 8.0 9.0 Model TN4000-50Hz
Voltage 220V; 230V; 240V Engine brand YANMAR
Frequency 50Hz Engine model 3TNV88
Engine speed 1500R.P.M Speed control type Mechanical
Power factor 1.0 Alternator brand Mecc Alte
Phase Single Alternator model LT3N-130/4
Control system SMARTGEN HGM1790N
Starter motor voltage 12V
Max. height of mast 9 meters
MULTI Power lighting towers & generator sets are compliant with ISO
Mast lifting/lowing system Mechanical
9001 and CE standard, which include the following directives:
Total power of lamps 4x1000 watts
⚫ 2006/42/EC Machinery safety.
⚫ 2006/95/EC Low voltage
Fuel consumption 2.0L/H
⚫ EN 60204-1: 2006+A1: 2009, EN ISO 12100: 2010, EN ISO 13849- Fuel tank capacity 100L
1:2008, EN 12601: 2010
Standard Reference Conditions
(1) PRP (Prime Power) Note: Standard reference condition 25℃ (77°F) air inlet temp. 100m
According to ISO 8528-1, prime power is the maximum power (328ft) A.S.L 30% relative humidity. Fuel consumption date with diesel fuel
available during a variable power sequence, which may be run for with specific gravity of 0.85 and conforming to BS 2869: 1998 Class A2
an unlimited number of hours per year, between stated
maintenance intervals. The permissible average power output
during at 24 hours period shall not exceed 80% of the prime power. Dimension & Weight
10% overload available for governing purposes only.

(2) ESP (Standby Power)


According to ISO 8528-1. It is defined as the maximum power
available, under the agreed operating conditions, for which the
generating set is capable of delivering for up to 500 hours of
operation per year (of which no more than 300 hours for continuative
use) with the maintenance intervals and procedures being carried
out as prescribed by the manufactures. No overload capability is Dimension Storage Working
available.
Length (L) 4250mm 2600mm
Container Loading Capacity Width (W) 1450mm 2350mm
Height (H) 1700mm 9000mm
6 SETS / 20GP Net Weight 870kg
Note: This parameters allows for some acceptable deviations.
16 SETS / 40GP
◼ Engine Specification ◼ Alternator Specification

MODEL: YANMAR 3TNV76 MODEL: Mecc Alte LT3N-130/4


Cylinder number 3 Number of phase Single
Aspiration system Natural Rated power (KW) 8
Cooling method Water cooled Frequency (Hz) 50
Combustion system Direct Injection Power factor (Cos Phi) 1
Bore x Stroke (mm) 88x90 Temp. rise 125K
Compression ratio 19:1 Insulation type H class
Rated speed (RPM) 1500 Ambient temp. 40℃
Displacement (L) 1.642 IP rating IP23
Rated power (KW) 12.2 Excitation system Self-excited
Standby power (KW) 13.2 Bearing Single bearing
Fuel injection pump YPD-MP2 Coating Vacuum impregnation
Injection Nozzle 1-3-2-1 Voltage regulator A.V.R
Oil capacity (L) 6.7 Coupling Flexible disc
Charger Alternator capacity 2
Starter motor capacity DC 12V – 1.2A

◼ Operation Mast Specification ◼ Lamps Specification


Max. height of mast 9m Total power of lamps 4 x 1000 watts
Elevation system Mechanical Lamps type Metal halide lamps
Raising/Lowing mast method 1800LBS Manual winch Light capacity 4 x 110,000 lumen
Mast stages 3 Design lifetime 5000 hours
Turning angle 358° manually Working temperature ≤85℃
Mast material Steel tube Light coverage 5 ~ 7 acres

◼ Chassis Specification ◼ Controller Panel Specification


Hitch type Ring/Ball tow hitch Control module SMARTGEN HGM1790N
Brake type Mechanical hand brake Main & Lamps Breaker DELIXI
Trailer structure Single axle Emergency stop Equipped
Tyre size 13 inch Starting method Electric (Key start)
Leveling jack type Manual Output Socket 1 x Single phase
◼ Lighting Area

◼ Standard Supply Scope


⚫ Industrial exhaust silencer ⚫ Flexible pipes ⚫ Float Battery charger ⚫ Base frame
⚫ Maintenance free battery ⚫ Battery wires ⚫ Manual books ⚫ Digital control panel
⚫ Water cooling radiator ⚫ Wiring diagram ⚫ Tool kits ⚫ Main circuit breaker
⚫ A.V.R ⚫ Build-in based fuel tank ⚫ Emergency stop button ⚫ Power output socket x 1
⚫ Weather proof canopy ⚫ Top caution light ⚫ Ball/Ring hitch with save chain

◼ Optional Supply Scope

Engine Alternator Control Panel Lamps

 PERKINS 403D-11G engine  STAMFORD alternator  Smartgen ALC controller  4x1500W lamps
 KUBOTAD1105-BG engine  MECC ALTE alternator Sunrise & sunset start/stop  Spotlights
 Water jacket pre-heater Remote start/stop  4x400W LED Spotlights
 Battery isolator  ABB breakers
 Power output socket x 2
◼ Control Panel
Configuration
⚫ Emergency stop button
⚫ Protection MCB + Lamps & Socket circuit breaker
⚫ Digital control module
⚫ Power output socket x 2 (Single Phase)
⚫ Weather proof controller box
⚫ Alarm buzzer

Key Features Control Module: SMARTGEN HGM1790N


⚫ Large back-lit icon LCD display Digital input 5
⚫ Single / Three phase generator monitoring Relay output 5
⚫ AC phase voltage display Communication interface PC
⚫ Generator frequency display AMF M/A
⚫ Engine speed RPM display AC System 1P2W / 2P3W / 3P3W / 3P4W
⚫ Battery voltage Vdc display Phase voltage input 0-300Vac
⚫ Generator running hours display Frequency range 3Hz – 70Hz
⚫ Engine coolant temperature display Standby current TBA
⚫ Engine oil pressure display Accuray 1%
⚫ Pre-alarm & shutdown alarm function Control relay outputs 3A/30Vdc
⚫ Low oil pressure shutdown alarm DC supply DC 8-35V
⚫ Engine high temperature shutdown alarm Operating temp. -20 ~ +70℃
⚫ Engine over speed shutdown alarm
⚫ Generator over/under voltage shutdown alarm
⚫ Generator over load shutdown alarm
⚫ Start/Stop failure shutdown alarm
⚫ IP65 rating offers increased resistance to water ingress

◼ Controller Module Options

SMARTGEN COMAP DEEPSEA

ALC704 Inteli Nano Inteli Nano

All information in the document is substantially correct at the time of printing


But may be subsequently altered by the company.

You might also like