Scribd
Upload
69 views1 page

RC2-100B Screw Compressor: Standard Compressors Accessories Ports

This document provides specifications for the RC2-100B screw compressor. It has a rated displacement of 4167 cubic feet per hour and operates at a rated speed of 3550 RPM. The compressor has a volume ratio of 2.6 and capacity control ranging from 33% to 100%. Additional details provided include lubrication type, motor specifications, lubricant and crating weights, standard accessories, and electrical data.

Uploaded by

Prashanth Ravindran
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
69 views1 page

RC2-100B Screw Compressor: Standard Compressors Accessories Ports

This document provides specifications for the RC2-100B screw compressor. It has a rated displacement of 4167 cubic feet per hour and operates at a rated speed of 3550 RPM. The compressor has a volume ratio of 2.6 and capacity control ranging from 33% to 100%. Additional details provided include lubrication type, motor specifications, lubricant and crating weights, standard accessories, and electrical data.

Uploaded by

Prashanth Ravindran
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

RC2-100B Screw Compressor

3
Displacement  /hr  60 Hz  4167 

Rated Speed  Rpm  60 Hz  3550 

Specifications
Volume Ra o  Vi   2.6 (standard other Vi available) 
Compressor  
33%, 66% & 100% Step Capacity Control,  
Capacity Control  %  
33%~100% Con nuous Stepless Capacity Controls 

Lubrica on  Differen al Pressure Feed Lubricant 

Type  3 Phase, 2 Pole, Squirrel Cage, Induc on Motor 

Motor    Insula on  Class F 

Protec on  3 PTC Protec on 1 per winding 

Lubricant Charge  Gallons  1.9 


 
Oil Heater  Wa s  150 

Hydrosta c Pressure test  lb/in2G  597 

Weight  Pounds  617 

Crated Weight  Pounds  816 

Crate Dimensions  Inches  50x26x31 

Standard Compressors Accessories Ports


 Modulating Slide Capacity  Oil Level Float Switch  External Oil Cooler
 Weather Proof Terminal Box for outdoor  Suction Filter  Liquid Injection (into screw chamber)
applications  Oil Filter  Economizer
 115/1/60 Control Voltage  PSI Relief Valve  Suction, Discharge & Oil Service
 115/1/60 Crankcase heater  Oil Sight Glass
 Discharge Check Valve  PT1000 for Reading Motor Temp
 Discharge Service Valve (Discharge Stop  INT69HBY supporting motor and
Valve) with standard connection sizes and discharge (PTC) temperature sensor
supplied with flanges and bushings protection as well as Phase Loss and
 Suction Service Valve (Suction Stop Phase Reversal at Start Up Only
Valves) with standard connection sizes
and supplied with flanges and bushings

Discharge Stop Valve 1 1/2”

Discharge Check Valve 1 1/2”


Connections  

Suction Stop Valve 2”

Economizer 3/8” solder

Liquid Injection (chamber) 3/8” flare A B C D E


Discharge Side Copper Pipe Sizing 1 5/8” 2.05” 2.95” 1.38” 1.64” 2.05”

Suction Side Copper Pipe Sizing 2 1/8” 1.99” 3.54” 1.18” 2.14” 2.56”
MCC & LRA

R22, R407C, R404A, R507A, R134a  

Maximum Y- Part Wind Start  


Hertz Volts Continuous Locked Rotor Locked Rotor Locked Rotor Locked Rotor
Current Amps (Y) Amps (D) Amps (D) Amps (DD)
60 220 142 153 460 211 440

60 460 68 80 240 113 235

5877 Enterprise Pkwy, Fort Myers, FL 33905 USA   Phone: (239) 694 0089  ‐  Fax: (239)694 0031   www.mcscontrols.com  ‐  [email protected] 

You might also like