School STA.
CRUZ NATIONAL HIGH SCHOOL Grade Level Grade 8
DAILY LESSON Teacher PRINCESS AIMIE B. LALONGISIP Learning Area TLE – ICT_CSS
PLAN Teaching Date and Time Quarter 3
I. OBJECTIVES
A. CONTENT The learners demonstrate and understanding of concepts and underlying principles in performing measurements and
STANDARD calculations.
B. PERFORMANCE The learners shall be able to accurately measure and calculate based on a given tasks.
STANDARD
C. LEARNING LO 1. Select measuring tools. (TLE_IACSS9-12PMC-IIa-b-10)
COMPETENCY At the end of the lesson, students will be able to:
1. identify object/s or component to be measured;
2. obtain correct specifications from relevant source;
3. select measuring tools in line with job requirements;
4. select appropriate measuring instrument to achieve the required outcome;
II. CONTENT Memory and Storage Devices
III. LEARNING
RESOURCES
A. References
1. Teachers Guide Computer System Servicing CG p. 12
Pages
2. Learners Materials LM – TLE – CSS p. 8-15
3. Textbook Pages
4. Additional
Materials from
Learning Resources
(LR) Portal
B. Other Learning PowerPoint Presentation, and Visual Aids
Resources
IV. PROCEDURES
TEACHER’S ACTIVITY STUDENT’S RESPONSE
A. Classroom Rules Prayer
Arrangement of chairs and cleaning their area
Checking of Attendance
Reminding health protocols and classroom rules
Good afternoon, class! Good afternoon, ma’am!
REVIEWING OF THE PAST LESSON
Last meeting, we studied about the different file and computer
maintenance. And for me to see if you already understand our last
lesson, let us answer these questions. Raise your hand if you want
to answer. The answer should be True or False.
Answer Key:
_____1. File and computer maintenance are less important since 1. False
the user will always scan and update his antivirus and spyware. 2. True
_____2. There are two ways of opening the content of the file or 3. False
folder in the computer. 4. False
_____3. Disk defragmentation will lessen the efficiency of data 5. True
retrieval and the improvement of computer performance.
_____4. Dusty computer is a good indication that the computer is
properly maintain by the owner.
_____5. Running an antivirus scan is an important part of
maintaining your computer and avoiding complications.
B. Establishing a And today we are going to have a new endeavour with Basic File
Purpose for the and Computer Maintenance. As we go through with this lesson,
Lesson you are expected to:
1. identify object/s or component to be measured;
2. obtain correct specifications from relevant source;
3. select measuring tools in line with job requirements;
4. select appropriate measuring instrument to achieve the
required outcome;
C. Presenting Activity: “Let us identify”
examples/instances Directions: To start with the lesson, let us identify first the use of
of the new lesson the hand tools in computer systems servicing. Give at least 8 hand
tools.
Name of the Hand Tool Function
1.
2.
3.
4.
5.
6.
7.
8.
D. Discussing new Activity: “Identify the Things”
concepts and Directions: The following are pictures related to components in
practicing new skills Computer Systems Servicing to be measured.
#1
Answer Key:
1. Hard Disk Drive
2. Flash Drive
3. Read-Only Memory
4. Floppy Drive
5. Optical Drive
E. Discussing new Activity: “Let us Summarize”
concepts and Directions: In the first column, they will see the different name of
practicing new skills the components of CSS to be measured and then write to the
#2
column B the functions of it.
Functions
Flash Drive
Floppy Drive
Hard Disk Drive
RAM Module
Optical Drive
(Students answer may vary.)
F. Developing Mastery Activity
(leads to Formative Direction: Match items on Column A with Column B. Write your
Assessment 3) answer on the space provided before the number.
Column A Column B Answer Key:
1. H
_____1. It is a storage device that uses A. Floppy 2. I
lasers to read data on the optimal 3. B
media. Drive 4. F
5. C
_____2. It is temporary storage for data and B. IDE 6. D
programs that are being accessed by 7. E
the Central Processing Unit (CPU). 8. A
_____3. It is an early drive controller C. Read-only
interface that connects computers memory
and hard disk drives which an
interface that uses a 40-pin
connector.
_____4. It is a magnetic storage device that D. Flash drive
is installed inside the computer.
_____5. These are chips that are located on E. Memory
the motherboard. module
_____6. It is a removable storage device F. Hard drive
that connects to the USB port.
_____7. It is soldered the memory chips on G. DDR
a special circuit board.
_____8. It is a storage device that uses H. Optical drive
removable 3.5-inch disks.
I. Random
Access
Memory
G. Finding practical The teacher will ask a question to the students and they are going
application of to answer it orally.
concept and skills in
daily living How can you assure that your components are exact
specifications for the specific computer?
In our present generation, what is the advantages of using
this memory and devices given that we already have much (Students answer may vary.)
more advanced technology?
H. Making Today, we have studied about the different memory and storage
generalization and devices that we can use when saving data and accessing data in
abstraction about the computer. There are several devices we can use. Under memory,
lesson we have two. The Random Access Memory (RAM) and Read-
Only Memory (ROM). While under the storage devices, we have
Hard Disk, Floppy Disk, External Flash Drive and Optical Drive.
And last but not the least, under the different Drive Interfaces, we
have the Integrated Drive Electronics (IDE), Serial ATA (SATA),
and Small Computer System Interface (SCSI).
Those are all the devices you can use still in saving your files in
your computer and transferring it to another computer also.
Do you have any questions regarding our topic for today? None, ma’am.
Then, I have one question for you. Among all those devices that
we have discussed, which do you think works best? (Students answer may vary.)
Very well said. You have different answer and that is no problem
at all because we really don’t resemble each and every one. And
just a quick reminder to all of you, you are all unique in your own
ways so stop trying to be someone you’re really not just to fit in.
Okay?
I. Evaluating Learning Multiple Choice. Answer Key:
Directions: Choose the letter of the best answer. Write the chosen 1. A
letter on a separate sheet of paper. 2. C
1. It is the temporary storage for data and programs that are being 3. B
accessed by the CPU. 4. A
a. random access memory 5. C
b. read-only memory
c. optical disk
d. floppy disk
2. It retains its contents even when the computer is powered
down. The contents cannot be erased or changed by normal
means.
a. random access memory
b. optical disk
c. read-only memory
d. hard disk drive
3. It is used as permanent storage for data.
a. optical disk
b. hard disk drive
c. read-only memory
d. floppy disk
4. It is a storage device that uses lasers to read data on optical
media.
a. optical disk
b. hard disk drive
c. floppy disk
d. flash drive
5. It is a drive controller interface that can connect up to 15
drives.
a. random access memory
b. SATA
c. SCSI
d. hard disk drive
J. Additional
application or
remediation
V. REMARKS
VI. REFLECTION
A. No. of learners who
earned 80% in the
evaluation.
B. No. of learners who
require additional
activities for
remediation.
C. Did the remedial
lesson work? No. of
learners who have
caught up with the
lesson.
D. No. of learners who
continue to require
remediation
E. Which of my
teaching strategies
worked wee? Why
did it work?
F. What difficulties did
I encounter which
my principal or
supervisor can help
me solve?
G. What innovation or
localized materials
did I used/discover
which I wish to
share with other
learners?
Prepared by: Checked by: Noted by:
PRINCESS AIMIE B. LALONGISIP GIGIE R. RAMOS FLORENTINO S. BANITE
Subject Teacher Master Teacher I Head Teacher III
