Scribd
Upload
75 views1 page

Ultrasonic Pulse Velocity Testers: Concrete

This document describes an ultrasonic pulse velocity tester used to determine faults, voids, and cracks in concrete. It works by generating sound pulses that travel from a transmitter probe to a receiver probe through the material, allowing measurement of the time it takes to travel. This provides data on the homogeneity and modulus of elasticity of the concrete. A C369N model is presented as having adjustable pulse amplitude, single or continuous acquisition modes, data storage of up to 30,000 samples, and connection to a computer or oscilloscope via USB or outlets. Accessories include different probe types for various concrete densities and longer cable pairs for large structures.

Uploaded by

civilceeji
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
75 views1 page

Ultrasonic Pulse Velocity Testers: Concrete

This document describes an ultrasonic pulse velocity tester used to determine faults, voids, and cracks in concrete. It works by generating sound pulses that travel from a transmitter probe to a receiver probe through the material, allowing measurement of the time it takes to travel. This provides data on the homogeneity and modulus of elasticity of the concrete. A C369N model is presented as having adjustable pulse amplitude, single or continuous acquisition modes, data storage of up to 30,000 samples, and connection to a computer or oscilloscope via USB or outlets. Accessories include different probe types for various concrete densities and longer cable pairs for large structures.

Uploaded by

civilceeji
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

CON CR E T E

ULTRASONIC PULSE VELOCITY TESTERS


STANDARDS: EN 12504 part. 4 / ASTM C597 / BS 1881:203 / UNI 9524 / NF P18-418 / UNE 83308
Used to determine the presence of faults, voids, cracks etc., in in-situ or precast concrete and for longterm monitoring of structures subject
to environmental conditions.
They give data concerning the homogeneity of the concrete, by generating pulses of sound into the concrete and measuring the time the
sound to travel from the transmitter probe to the receiver probe through the material. Furthermore it is possible to have indicative data
about the modulus of dynamic elasticity, and strength of the concrete.

AVAILABLE MODELS:

section C
C369N
Ultrasonic pulse velocity tester
“high technology”
- Measuring range: 0 - 3000 µs - accuracy +/- 0,1 µs
- Selection of the ultrasonic pulse amplitude adjustable from
250 to 1000 V
- Measurement of the required time by the ultrasonic pulse
to go through the tested material.
- Single or continuous acquisition mode with automatic or
manual saving.
- Zero calibration with depuration of the time for the
pulse to go through the probes. 295
- Calibration of a defined time value.
- Capacity of data acquisition, processing and
filing of the test data up to 30.000 samples.
- Interface mini USB for PC connection.
- Two outlets for connection to the oscilloscope.
- Languages: English, French, German, Spanish, Italian.
- The use of the instrument is made easy because it
is based on the user-friendly system.
The standard appliance includes:
- The instrument in basic configuration in a practical
palmer container.
- Two 55kHz probes with connection cables.
- Calibrating cylinder and contact paste. C369N
- Battery rechargeable pack NiMh 4,8V > 2000m/A with low battery condition alarm.
- Anti shock case holding the unit and the accessories.
- External feeder 230V and battery charger 12V 500m/A.
Case dimensions: 400x340x110mm
Weight: 2 kg approx.

ACCESSORIES:
C369N
C370-08 EXPONENTIAL TRANSMITTING/RECEIVING with case
PROBES (couple), 55 kHz Nominal Frequency.
C372-10 TRANSMITTING/RECEIVING PROBES (couple), 150
kHz Nominal Frequency, indicated for homogeneous,
compact, high density concrete.
C372-11 TRANSMITTING/RECEIVING PROBES (couple), 24
kHz Nominal Frequency, indicated for heterogeneous,
low density concrete.
SPARE-PARTS:
C370-10 COUPLE OF CABLES (each 10 mt. long) to connect
the probes to the tester. Used to test voluminous/large C370-02 TRANSMITTING/RECEIVING PROBES (couple), 55 kHz
structures. C370-06 COUPLE OF CABLES (each 3,5 mt. long) to connect
the probes to the tester.
C370-07 Tube of grease to better coupling the probes to the
material under test.
material testing equipment

You might also like