ODU600V2: Product Ordering Guide

AVIAT NETWORKS
ODU600V2
PRODUCT ORDERING GUIDE
OCTOBER 2020
DocReg #4403-013
ODU600v2 PRODUCT ORDERING GUIDE
Copyright © 2020 by Aviat Networks.

All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a
retrieval system, or translated into any language or computer language, in any form or by any means,
electronic, magnetic, optical, chemical, manual or otherwise, without the prior written permission of Aviat
Networks.
DISCLAIMER
Aviat Networks makes no representation or warranties with respect to the contents hereof and specifically
disclaims any implied warranties or merchantability or fitness for any particular purpose. Further, Aviat
Networks reserves the right to revise this publication and to make changes from time to time in the content
hereof without obligation of Aviat Networks to notify any person of such revision or changes.
TECHNICAL SUPPORT
If you require technical assistance or if you have discovered a product issue, contact the Technical Help
Desk nearest to you as soon as possible. Their contact details are shown below:
USA Europe, Middle East & Africa Asia/Pacific

Aviat Networks Aviat Networks Aviat Networks
San Antonio, TX Blantyre, Scotland, G72 0FB Clark Freeport Zone
Phone: +1 210 526 6345 United Kingdom Philippines 2023
Toll Free (USA): 1-800-227- Phone : +1 210 526 6345 Phone: +1 210 526 6345
8332
Fax : +44 16 9871 7204 (English) Fax : +63 45 599 5196
Fax: +1 210-526-6315
+33 1 5552 8012 (French) E-mail:
E-mail: [email protected]
E-mail: [email protected]
[email protected]
Page 2 of 30 AVIAT NETWORKS April 2020

AMENDMENT RECORD
Author Description Version Date
Tony Wood Initial Version 1.0 June 9th 2017
Tony Wood Minor Corrections 1.1 June 24th 2017
Tony Wood Various updates 1.2 October 27th 2017
Tony Wood Various updates 4403-005 November 29th 2017
Tony Wood Added adaptors 179-530512-xxx and 179-530507- 4403-006 June 2018
xxx
Tony Wood Deleted 179-530507-006/007/011 not commercially 4403-007 June 2018
viable
Tony Wood Various updates, remote mounts etc 4403-008 Feb 2019
Tony Wood Mixing v1 and V2, transitions 4403-009 August 2019
Tony Wood Added 13/26GHz WG adaptors 4403-010 Sept 2019
Tony Wood/ Formatting updates and other edits 4403-011 March 2020
Stuart Little
Tony Wood 26GHz Flex WG correction 4403-012 April 2020
Tony Wood Added Shenglu antennas 4403-013 Oct 2020

TABLE OF CONTENTS
DISCLAIMER 2
TECHNICAL SUPPORT 2
AMENDMENT RECORD 3
About This Guide 5
PURPOSE 5
ECLIPSE PRODUCT MANAGEMENT CONTACTS 5
ODU600v2 Product Summary 6
INTRODUCTION 6
INTEROPERABILITY AND COMPATIBILITY 6
PHYSICAL DETAILS 7
Ordering overview 8
PART NUMBER SELECTION 8

ODU ORDERING DETAILS 8
PLANNING NUMBERS 8
CABLE KIT OPTIONS 9
ORDERING ACCESSORIES FOR LONGER CABLE RUNS 150-300M 10
LIGHTNING ARRESTORS (LA) 10
CITEL INLINE TYPE 10
HPX (POLYPHASER OUTLINE) TYPE 11
COUPLER 12
OMT 13
ANTENNA 14
CONVERSION HARDWARE 15
ANTENNA- COMMSCOPE 15
ANTENNA - RADIOWAVES 16
ODU600V2 TO V1 ADAPTOR 17
Mixing 600v1 and V2 on OMT’s and Protection Couplers 18
REMOTE MOUNT ADAPTORS (ODU AND COUPLER ANTENNA PORT) 20

FLEXIBLE WG PART NUMBERS 21
REMOTE MOUNT BRACKET 21
INDOOR MOUNTS 22
USEFUL DATA 23
PART NUMBER SUMMARY 23
Abbreviations 29

ABOUT THIS GUIDE

PURPOSE
The intent of this Product Ordering Guide is to assist sales staff and approved resellers when quoting the
ODU600v2 product. This document is intended as a guide to the Eclipse platform and should be used to
supplement the existing sales tools such as the manual, product guides and Siebel.
ECLIPSE PRODUCT MANAGEMENT CONTACTS

The following people are responsible for managing the Eclipse product. Contact them via their current
contact information, available through the Aviat Networks Intranet:
• Tony Wood, Eclipse Product Management
• Ruth French, Product Compliance
• Kevin O Carrol, Antennas

ODU600V2 PRODUCT SUMMARY

INTRODUCTION
ODU600v2 is a replacement for the original ODU600 (ODU600v1). It performs the same functions as
600v1, but has the following additional features:
Single microwave radio module to support a single radio channel operating single-polarity up to 112MHz
and 4096QAM (currently only 80MHz 4096QAM is supported on RAC70).
INTEROPERABILITY AND COMPATIBILITY

RF performance in comparison to ODU600v1 is not always the same, refer to datasheets specific
differences.
OTA interoperability between ODU600v1 and ODU600v2, but restrictions on XPIC combined operation.
Adaptor kits available to mount to existing Commscope Slip-fit antennas.
Common antenna mount with WTM4000 (new Antenna part numbers)
Modulation/channel size support:
• Up to 256QAM/56MHz with RAC60/6X
• Up to 1024QAM/56MHz with CTR 8540 (RACx2), 83xx
• Up to 4096QAM/80MHz with RAC70/7X
Figure 1.
Note that 6-11 GHz needs an adaptor to fit a flexible waveguide, 13-42GHz can be mounted directly.
However the use of the adaptor kit (179-530500-XXX) detailed later in this guide is preferred as it provides a
consistant interface across all bands.

Figure 2
PHYSICAL DETAILS
Parameter Details
Size 230mm x 180mm x 75mm High (Volume 2700cc)
Weight 6-11 GHz 3.6 Kg
Power Consumption (Nominal), 6-11 GHz 50 Watts
Power Consumption (Nominal), 13-42 GHz 35 Watts

ORDERING OVERVIEW
When ordering an ODU, certain basic accessories need to be selected or considered.
• Identification of the correct ODU part number
• IF cable
• Lightning arrestor
• Configuration (XPIC, Remote Mount, direct mount, 1+1 protection etc.)
• Grounding
• Antenna selection
PART NUMBER SELECTION

A new ODU600V2 excel based tuning guide is available on the intranet. Use this to select the correct part
for your application. (docreg ref 8771)
Due to superior design the number of variants 6-38GHz is cut from 484-part numbers to 137-part numbers.
This is due to no ETSI/ANSI variants, multiple T-R options and wider tuning ranges.
ODU ORDERING DETAILS

Each ODU600v2 is ordered by choosing the appropriate band, sub-band and T-R split and the part numbers
follow the same format as ODU600. An Excel based guide will be made available, but the table below lists
all options.
Due to superior design the number of variants 6-38GHz is reduced from 484 part numbers to 137 part
numbers. This is due to no ETSI/ANSI variants, multiple T-R options and wider tuning ranges.
The ODU600V2 is supplied with standard accessories as detailed below:
Part Number Description Quantity

179-530316-001 ODU 600v2 ACCESSORIES KIT
Consisting of following Contents
037-579300-001 EARTH STRAP, ODU, LUG M6 TO TWIN M6, 2m (6.5') 1
011-300000-001 SILICONE GREASE, 1/10 OZ SAMPLE SIZE, DC-4 1
PLANNING NUMBERS
To reduce lead-time and improve the effectiveness of our manufacturing and material management
processes, it is important to ensure the full part number is used when registering opportunities and
preparing customer quotes. However, in the rare case where the specific sub-band may not be known,
there are a list of planning numbers that help to enter quotes without defining the full part number.
These generic planning numbers are listed in the table below
Number Description
M-ECH-06-HIGH ODU 600v2, Upper 6 GHZ, PLANNING PART NUMBER
M-ECH-06-LOW ODU 600v2, Lower 6 GHZ, PLANNING PART NUMBER
M-ECH-07 ODU 600v2, 07 GHZ, PLANNING PART NUMBER

Number Description
CABLE KIT OPTIONS

These kits give a convenient way to order a cable and set of essential accessories for IF cable installation.
These cables are CNT-400 type cable. They have a maximum run length of 150M due to voltage drop
considerations.
The construction is:
• Black PE Jacket
• Aluminium Braid
• Aluminum Foil
• Foam PE Dielectric
• Copper Clad Aluminum inner conductor
IF Cable kits
Component Part Description 037- 037- 037-
579311- 579311- 579311-
050 075 150
840-600311-XXX CABLE, IDU/ODU, NO CONN, 50M, .4IN 1 1 1
840-600202-001 TYPE N MALE CRIMP CONNECTORS 2 2 2
086-523257-001 UNIVERSAL COAXIAL GROUNDING KIT 3 3 6
023-380000-001 GROUND CONDUCTOR TOWER TERMINATION 3 3 6
006-371750-000 CABLE TIE KIT, 50 PCS 1 2 3
011-390001-001 WEATHERPROOFING KIT 1 1 1
If more than 150m is needed order the part below. Note that no accessories are supplied with this part
number.
Part Number Description
840-600311-500 CABLE, IDU/ODU, NO CONN, 500M, .4IN
840-600311-300 CABLE, IDU/ODU, NO CONN, 300M, .4IN

This cable is CNT-400ALLB type cable with a tinned copper braid. They have a maximum run length of
300M due to voltage drop considerations.
The construction is:
• Black Polyethylene Jacket
• Tinned copper Braid
• Aluminium Foil
• Foam Polyethylene Dielectric
• Copper Clad Aluminium inner conductor
ORDERING ACCESSORIES FOR LONGER CABLE RUNS 150 -300M

Order 2 Connectors per cable run.
Order 1 ground kit and ground termination per 30m.
Order enough cable ties for 1 tie every 1 meter.
Order 1 waterproof kit for every 2 connectors.
LIGHTNING ARRESTORS (LA)

The ODU600V2 has an inbuilt multi strike lightning arrestor that complies to IEC-6000-4-5 Class 5 .
However, to protect the RAC card a separate LA should always be installed at the entry to the shelter or
building.
• Note almost all returned RAC field failures are due to transient high voltage surge damage.
• The highest protection is obtained by fitting a LA at the ODU as well as at building entry.
• Note that good low impedance grounding throughout the IF cabling system is essential for
effective lightning protection
Two types of arrestor are offered, both are Hybrid types. Technical details can be supplied by contacting
Tony Wood.
CITEL INLINE TYPE

Description: Low cost, medium performance rated to 8/20uS pulse of 4 Kv. RF path directly coupled, Gas
Discharge Tube and parallel MOV design. This product is suitable for most applications.
Part Number 179-530062-002

This arrestor is supplied with a 1M long ground cable:
And a 2 hole termination lug:
HPX (POLYPHASER OUTLINE) TYPE

This option is higher cost, high performance rated to 8/20uS pulse of 5 Kv fast acting.
A hybrid circuit design incorporates different over voltage devices and RF isolating technology. The DC is
decoupled from the RF path, passes through coordinated protection devices, and re-coupled to the RF
path.
This product is suitable for high lighting strike applications.
Part Number 074-301008-001
Supplied with 2m ground cable.

COUPLER
Single pole equal and unequal loss couplers, direct mount to all WTM-4000 / ODU600v2 Antenna, all
suppliers.
Number Description
086-523300-063 Coupler Assy ODU 600v2 , 6 GHz Equal 3 dB, V and H Pole
086-523300-066 Coupler Assy ODU 600v2 , 6 GHz Unequal 6 dB, V and H Pole
086-523300-073 Coupler Assy ODU 600v2 , 7/8 GHz Equal 3 dB, V and H Pole
086-523300-076 Coupler Assy ODU 600v2 , 7/8 GHz Unequal 6 dB, V and H Pole
086-523300-113 Coupler Assy ODU 600v2 , 10/11 GHz Equal 3 dB, V and H Pole
086-523300-116 Coupler Assy ODU 600v2 , 10/11 GHz Unequal 6 dB, V and H Pole

OMT
XPIC Couplers, direct mount to Commscope and RFS antenna 0.3M to 1.8M antenna. Note that this
solution is significantly lower cost than a dual pole antenna, flexible waveguide and remote mount set ups,
and also offers lower losses.
Number Description
086-523302-006 Coupler Assy XPIC 600V2 6 GHz OMT Assembly
086-523302-007 Coupler Assy XPIC 600V2 7/8 GHz OMT Assembly
086-523302-011 Coupler Assy XPIC 600V2 10/11 GHz OMT Assembly

ANTENNA
Three Antenna suppliers are set up to supply direct mount antenna for ODU600V2. Search for these part
numbers in Quoting tools and Oracle. Note that all antennas are supplied with antenna to pole mount
brackets.
• Commscope (part numbers starting AND-VHLPX-XXGTX)
• RFS (part numbers starting RFS-SCX-XXXXGT1X)
• Xian (part numbers starting XIA-WTCXX-XXXXXX-COSX/QOSX)
Example part numbers are shown below. Single pole rectangular and Cassegrain (XPIC) circular feed
options are listed for all 3 suppliers. Single pole antennas are supplied with a polarization-rotator to enable
H or V operation. This part fits between the ODU and the antenna and is supplied with every antenna.
COMMSCOPE
Example Part number Supplier Type Size Band ODU Mounting Suffix
AND VHLP 1 15 GT1
AND-VHLP1-15-GT1 Commscope Valuline 1 Foot 15 GHz Direct Mount 600V2 Single Pole
Diameter
AND VHLP 1 15 GT2
AND-VHLP1-15-GT2 Commscope Valuline 1 Foot 15 GHz Direct Mount 600V2 OMT Direct
Diameter Mount
RFS
RFS SC 3 190X GT1R
RFS-SC3-190XGT1R
RFS Compact 3 Foot 18 GHz Direct Mount 600V2 Single Pole
line Diameter
RFS SC 3 250X GT1C
RFS-SC3-250XGT1C RFS Compact 3 Foot 26 GHz Direct Mount 600V2 OMT Direct Mount
line Diameter

XIAN
XIA- WTC 12 127 DHR -CO SE
XIA-WTC12-127DHR-
XIAN Class 3 1.2M 13 GHz Single WG Direct Mount Circular Interface
COSE
ETSI Output 1.2/1.8M
XIA- WTC 12 W59 DHR -CO SD
XIA-WTC12-W59DHR-
XIAN Class 3 1.2M L6/U6 Single WG Direct Mount Rectangular
COSD
ETSI GHz Output 1.2/1.8M Interface
XIA- WTC 3 370 DHR -QO SE
XIA-WTC03-370DHR-
XIAN Class 3 0.3M 13 GHz Single WG Direct Mount Circular Interface
QOSE
ETSI Output 0.3/0.9M
XIA-WTC09-242DAR- XIA- WTC 09 242 DAR -QO SD
QOSD XIAN Class 3 0.9M 26 GHz Single WG Direct Mount Rectangular
ETSI Output 0.3/0.9M Interface
SHENGLU
Example Part Size ETSI Customer

Supplier Antenna Band Polarization Type Interface
number (m) Standard Code
SHU-SL A 18 13 S 3 S 49 A
SHU- A: Direct
S: Single 2: Class 2 S: Standard
SLA1813S3S49A Customer B:
Shenglu Antennas Size Band pole 3: Class 3 X: High
(Aviat) Remote
D: Dual pole 4: Class 4 XPD
C: Circle
SHU-SL A 09 6W S 3 S 49 A
SHU- A: Direct
SLA096WS3S49A Customer B:
(Aviat) Remote
C: Circle
SHU-SL A 12 10 S 3 S 49 A
SHU- A: Direct
SLA1210S3S49A Customer B:
(Aviat) Remote
C: Circle
SHU-SL A 06 7W S 3 S 49 A
SHU- A: Direct
SLA067WS3S49A Customer B:
(Aviat) Remote
C: Circle
CONVERSION HARDWARE
ANTENNA- COMMSCOPE
Only Commscope Valuline3 - 0.3M to 1.8M can currently be converted by an original manufacturers bolt on
adaptor.

Part Number Description Comment

AND-VINTA-6W- 6 GHZ ANTENNA CONVERSION KIT,VALULINE 3 to 600v2 Fits ODU600 antenna
GT1
AND-VINTA-7W- 7/8 GHZ ANTENNA CONVERSION KIT;VALULINE 3 to 600v2 Fits ODU600 antenna
GT1
AND-VINTA-11W- 10/11 GHZ ANTENNA CONVERSION KIT ;VALULINE 3 to Fits ODU600 antenna
GT1 600v2
AND-VINTA-15-GT1 15 GHZ ANTENNA CONVERSION KIT,VALULINE 3 to 600v2 Fits ODU600 antenna
AND-VINTA-18-GT1 18/23 GHZ ANTENNA CONVERSION KIT,VALULINE 3 to Will not convert
600v2 ODU600 26GHz
AND-VINTA-38-GT1 28/32/38 GHZ ANTENNA CONVERSION KIT,VALULINE 3 to Fits ODU600 antenna
600v2
AND-VINTA-6W- 6 GHZ ANTENNA CONVERSION OMT KIT,VALULINE 3 to Fits ODU600 antenna
GT2 600v2
AND-VINTA-7W- 7/8 GHZ ANTENNA CONVERSION OMT KIT;VALULINE 3 to Fits ODU600 antenna
GT2 600v2
AND-VINTA-11W- 10/11 GHZ ANTENNA CONVERSION OMT KIT ;VALULINE 3 Fits ODU600 antenna
GT2 to 600v2
AND-VINTA-15-GT2 15 GHZ ANTENNA CONVERSION OMT KIT,VALULINE 3 to Fits ODU600 antenna
600v2
AND-VINTA-18-GT2 18/23 GHZ ANTENNA CONVERSION OMT KIT,VALULINE 3 Will not convert
to 600v2 ODU600 26GHz
AND-VINTA-38-GT2 28/32/38 GHZ ANTENNA CONVERSION OMT KIT,VALULINE Fits ODU600 antenna
3 to 600v2
Note that no 13 GHz or 26 GHz kit is offered, as ODU600 waveguide is a different waveguide size to
ODU600V2.
ANTENNA - RADIOWAVES
Some conversion kits are available to convert Radiowaves antennas supplied with EXALT,
DRAGONWAVE, CERAGON, CAMBIUM, REMECor TRANGO radios to use ODU600v2 or WTM400
radios. Contact Tony Wood for more details.

Aviat Item Item Description

Number
086-600001-001 CONVERSION KIT, CONVERT
FROM EXALT/DRAGONWAVE/CERAGON/CAMBIUM/REMEC/TRANGO 18 GHZ HP2
ANTENNA TO WTM4100 DIRECT MOUNT ANTENNA
ODU600V2 TO V1 ADAPTOR
These adaptors allow a ODU600v2 to mimic the mounting pattern of a ODU600v1. This will allow a 600V1
coupler or OMT to be spared. First deliveries December 2018.
Number Description
179-530512-006 Adaptor Kit Die-Cast ODU600v2 to ODU600V1 6 GHz
179-530512-007 Adaptor Kit Die-Cast ODU600v2 to ODU600V1 7/8 GHz


179-530512-028 Adaptor Kit Die-Cast ODU600v2 to ODU600V1 28/32/38 GHz
Note 13 GHz and 26 GHz ODU600v2 uses a different waveguide size to ODU600v1, but connection is
enabled by a lossless stepped waveguide transition. These kits are 179-530515-013 and 179-530515-026.
MIXING 600V1 AND V2 ON OMT’S AND PROTECTION

COUPLERS


REMOTE MOUNT ADAPTORS (ODU AND COUPLER ANTENNA

PORT)
Aviat Part Description

Number
179-530500-006 WTM 4100/4200 ODU600v2 6 GHz WG Remote Mount Kit
179-530500-007 WTM 4100/4200 ODU600v2 7/8 GHz WG Remote Mount Kit
179-530500-011 WTM 4100/4200 ODU600v2 10/11 GHz WG Remote Mount Kit
179-530500-013* WTM 4100/4200 ODU600v2 13/15 GHz WG Remote Mount Kit
179-530500-018* WTM 4100/4200 ODU600v2 18/23 GHz WG Remote Mount Kit
179-530500-026* WTM 4100/4200 ODU600v2 26 GHz WG Remote Mount Kit
179-530500-028* WTM 4100/4200 ODU600v2 28/32/38 GHz WG Remote Mount Kit
Kits are composed of the adaptor, an O-ring seal, and 4 screws

*For bands 13GHz and above, these ODU600V2’s have the 4 hole UBR hole pattern and so do not need a
conversion piece. A flexible waveguide can be directly mounted on to the ODU, however the use of these
kits gives a consistent interface
NOTE: 13 and 26 GHz ODU600v2 have changed waveguide sizes compared to previous ODU’s , the kits
below enable a 13 and 26GHz ODU600v2 to be connected to remote mount antenna with the original R120
and R220 flanges.
Number Description
WTM 4100/4200 ODU600v2 13 GHz WG Transition R140 Radio side to UBR120 Flex
179-530515-013
WG side
WTM 4100/4200 ODU600v2 26 GHz WG Transition R260 Radio side to UBR220 Flex
179-530515-026
WG side
Stepped transitions
kits come with screws
and o rings

FLEXIBLE WG PART NUMBERS

Number Description Band
FLEXIBLE WAVEGUIDE, 5.925 - 7.125 GHZ, 900MM, PDR70 6 GHz
086-069070-900
FLANGES
FLEXIBLE WAVEGUIDE, 7.125 - 8.500 GHZ, 900MM, PDR84 7/8 GHz
086-079084-900
FLANGES
FLEXIBLE WAVEGUIDE, 10.7 - 11.7 GHZ, 900MM, PDR100 10/11 Ghz
086-119100-900
FLANGES
ECLIPSE FLEXIBLE WAVEGUIDE, 14.25-15.35 GHZ, 900MM, 13/15 GHz
086-159140-900
PBR140 FLANGES
086-189220-900
PBR220 FLANGES
n/a FLEXIBLE WAVEGUIDE, use 086-189220-900 + 179-530515-026 26 GHz
086-289320-900
PBR320 FLANGES
REMOTE MOUNT BRACKET
179-530502-001 Remote Mount Bracket Assembly ODU600v2
Note that Remote Mount Kits 179-530500-0XX are needed on 6-11 GHz ODU’s and are optional on 13 to
38GHz ODU’s.
Note that the bracket kit 179-530502-001 can be used to mount a Coupler as well

Alternate design, higher cost but more robust, recommended.

179-530514-001 Remote Mount Bracket Assembly, Side mount, ODU600v2
INDOOR MOUNTS
The ODU600v2 indoor mount is a modified ODU600V1 part

with extra holes.
086-523260-002 ODU 600V1 or V2 INDOOR VERTICAL RACK MOUNT ECLIPSE

012-910239-001 WRAPPER, WTM4000 & ODU600v2 RACK MOUNT
USEFUL DATA
ODU600V1 to V2 waveguide comparison, note that 13 and 26GHz have waveguide size changes. This
means that if these 2 bands are currently ODU600 and are replaced with 600V2, then Antenna / Flexible
waveguides will need to be converted by the use of 179-530501-013 / 179-530501-026 detailed in
preceding sections.
6 7/8 10 11 13 15 18 23 26 28 32 38 42
GHz GHz GHz GHz GHz GHz GHz GHz GHz GHz GHz GHz GHz
600v1 70 84 100 120 140 220 320 400 IEC R
137 112 90 75 62 42 28 22 EIA WR
600v2 70 84 100 140 140 220 260 320 400 IEC R
137 112 90 62 62 42 34 28 22 EIA WR
6 7/8 10 11 13 15 18 23 26 28 32 38 42
GHz GHz GHz GHz GHz GHz GHz GHz GHz GHz GHz GHz GHz
UDR70 UDR84 UDR100 UBR140 UBR140 UBR220 UBR260 UBR320 (4 hole) UG-383 IEC Flange
(8 (8 (8 hole) (4 hole) (4 hole) (4 hole) (4 hole) (4 hole)
hole) hole)
PART NUMBER SUMMARY

6 GHz
ECH-L6-0252-011 ODU600V2, L6 GHz, T-R 240/252.04/266MHz, 5927-6055 TX low ANSI
ECH-L6-0252-012 ODU600V2, L6 GHz, T-R 240/252.04/266MHz, 6175-6305 TX high ANSI
ECH-L6-0252-021 ODU600V2, L6 GHz, T-R 240/252.04/266MHz, 6039-6175 TX low ANSI
ECH-L6-0252-022 ODU600V2, L6 GHz, T-R 240/252.04/266MHz, 6295-6420 TX high ANSI
ECH-L6-0252-031 ODU600V2, L6 GHz, T-R 252.04 MHz, 5989-6109 TX low ANSI
ECH-L6-0252-032 ODU600V2, L6 GHz, T-R 252.04 MHz, 6241-6361 TX high ANSI
ECH-U6-0150-011 ODU600V2, U6 GHz, T-R 160/170/180MHz, 6540-6640 TX low ANSI
ECH-U6-0150-012 ODU600V2, U6 GHz, T-R 160/170/180MHz, 6710-6800 TX high ANSI
ECH-U6-0150-021 ODU600V2, U6 GHz, T-R 160/170/180MHz, 6630-6712.5 TX low ANSI
ECH-U6-0150-022 ODU600V2, U6 GHz, T-R 160/170/180MHz, 6790-6870 TX high ANSI


ECH-U6-0150-031 ODU600V2, U6 GHz, T-R 150MHz, 6875-6925 TX low ANSI
ECH-U6-0150-032 ODU600V2, U6 GHz, T-R 150MHz, 7025-7075 TX high ANSI
ECH-U6-0150-041 ODU600V2, U6 GHz, T-R 150MHz, 6925-6975 TX low ANSI
ECH-U6-0150-042 ODU600V2, U6 GHz, T-R 150MHz, 7075-7125 TX high ANSI
ECH-U6-0340-011 ODU600V2, U6 GHz, T-R 340/345MHz, 6430-6640 TX low ANSI
ECH-U6-0340-012 ODU600V2, U6 GHz, T-R 340/345MHz, 6770-6980 TX high ANSI
ECH-U6-0340-021 ODU600V2, U6 GHz, T-R 340/345MHz, 6590-6775 TX low ANSI
ECH-U6-0340-022 ODU600V2, U6 GHz, T-R 340/345MHz, 6930-7115 TX high ANSI
ECH-U6-0340-E11 ODU600V2, U6 GHz, T-R 340/345MHz, 6430-6640 TX low ETSI
ECH-U6-0340-E12 ODU600V2, U6 GHz, T-R 340/345MHz, 6770-6980 TX high ETSI
ECH-U6-0340-E21 ODU600V2, U6 GHz, T-R 340/345MHz, 6590-6775 TX low ETSI
ECH-U6-0340-E22 ODU600V2, U6 GHz, T-R 340/345MHz, 6930-7115 TX high ETSI
ECH-L6-0252-E11 ODU600V2, L6 GHz, T-R 240/252.04/266MHz, 5927-6055 TX low ETSI
ECH-L6-0252-E12 ODU600V2, L6 GHz, T-R 240/252.04/266MHz, 6175-6305 TX high ETSI
ECH-L6-0252-E21 ODU600V2, L6 GHz, T-R 240/252.04/266MHz, 6039-6175 TX low ETSI
ECH-L6-0252-E22 ODU600V2, L6 GHz, T-R 240/252.04/266MHz, 6295-6420 TX high ETSI
ECH-U6-0150-E11 ODU600V2, U6 GHz, T-R 160/170/180MHz, 6540-6640 TX low ETSI
ECH-U6-0150-E12 ODU600V2, U6 GHz, T-R 160/170/180MHz, 6710-6800 TX high ETSI
ECH-U6-0150-E21 ODU600V2, U6 GHz, T-R 160/170/180MHz, 6630-6712.5 TX low ETSI
ECH-U6-0150-E22 ODU600V2, U6 GHz, T-R 160/170/180MHz, 6790-6870 TX high ETSI
7 GHz
ECH-07-0154-011 ODU 600v2, 7 GHz, T-R 150/154/160/161/168/196MHz, 7424.5-7508.5 TX low
ECH-07-0154-012 ODU 600v2, 7 GHz, T-R 150/154/160/161/168/196MHz, 7582-7669.5 TX high
ECH-07-0154-021 ODU 600v2, 7 GHz, T-R 150/154/160/161/168MHz, 7480-7568 TX low
ECH-07-0154-022 ODU 600v2, 7 GHz, T-R 150/154/160/161/168MHz, 7637-7729 TX high
ECH-07-0154-031 ODU 600v2, 7 GHz, T-R 154MHz, 7184-7268 TX low
ECH-07-0154-032 ODU 600v2, 7 GHz, T-R 154MHz, 7338-7422 TX high
ECH-07-0161-011 ODU 600v2, 7 GHz, T-R 154/161/175/196MHz, 7191-7281 TX low
ECH-07-0161-012 ODU 600v2, 7 GHz, T-R 154/161/175/196MHz, 7355-7443 TX high
ECH-07-0161-041 ODU 600v2, 7 GHz, T-R 160/161/168MHz, 7577.5-7661.5 TX low
ECH-07-0161-042 ODU 600v2, 7 GHz, T-R 160/161/168MHz, 7738-7823 TX high
ECH-07-0161-051 ODU 600v2, 7 GHz, T-R 161MHz, 7619.5-7689.5 TX low
ECH-07-0161-052 ODU 600v2, 7 GHz, T-R 161MHz, 7780.5-7850.5 TX high
ECH-07-0168-011 ODU 600v2, 7 GHz, T-R 150/161/168/196MHz, 7499-7583 TX low
ECH-07-0168-012 ODU 600v2, 7 GHz, T-R 150/161/168/196MHz, 7665-7751 TX high
ECH-07-0175-011 ODU 600v2, 7 GHz, T-R 154/161/175MHz, 7124-7212 TX low


8 GHz
ECH-08-0283-E11 ODU 600v2, 8 GHz, T-R 283.5MHz, 7733-7873 TX low ETSI
ECH-08-0283-E12 ODU 600v2, 8 GHz, T-R 283.5MHz, 8016.5-8156.5 TX high ETSI
ECH-08-0283-E21 ODU 600v2, 8 GHz, T-R 283.5MHz, 7845-7985 TX low ETSI
ECH-08-0283-E22 ODU 600v2, 8 GHz, T-R 283.5MHz, 8128.5-8268.5 TX high ETSI
ECH-08-0151-011 ODU 600v2, 8 GHz, T-R 151.614MHz, 8204-8276 TX low
ECH-08-0151-012 ODU 600v2, 8 GHz, T-R 151.164MHz, 8355-8427 TX high
ECH-08-0151-021 ODU 600v2, 8 GHz, T-R 151.614MHz, 8273-8345 TX low
ECH-08-0151-022 ODU 600v2, 8 GHz, T-R 151.164MHz, 8424-8496 TX high
ECH-08-0311-011 ODU 600v2, 8 GHz, T-R 300/310/311.32/360MHz, 7700-7855 TX low
ECH-08-0311-012 ODU 600v2, 8 GHz, T-R 300/310/311.32/360MHz, 8025-8210 TX high
ECH-08-0311-021 ODU 600v2, 8 GHz, T-R 300/305.56/310/311.32/360MHz, 7835-8017 TX low
ECH-08-0311-022 ODU 600v2, 8 GHz, T-R 300/305.56/310/311.32/360MHz, 8145-8327 TX high
ECH-08-0119-011 ODU 600v2, 8 GHz, T-R 119/126MHz, 8278-8328 TX low
ECH-08-0119-012 ODU 600v2, 8 GHz, T-R 119/126MHz, 8397-8451 TX high


10 GHz
11 GHz
ECH-11-0490-011 ODU 600v2, 11 GHz, T-R 490/500/520/530MHz, 10915-11200 TX low ANSI
ECH-11-0490-012 ODU 600v2, 11 GHz, T-R 490/500/520/530MHz, 11425-11705 TX high ANSI
ECH-11-0530-011 ODU 600v2, 11 GHz, T-R 490/500/520/530MHz, 10695-10995 TX low ANSI
ECH-11-0530-012 ODU 600v2, 11 GHz, T-R 490/500/520/530MHz, 11200-11505 TX high ANSI
ECH-11-0490-021 ODU 600v2, 11 GHz, T-R 490/520/530MHz, 10795-11035 TX low ANSI
ECH-11-0490-022 ODU 600v2, 11 GHz, T-R 490/520/530MHz, 11285-11525 TX high ANSI
ECH-11-0490-031 ODU 600v2, 11 GHz, T-R 490/520/530MHz, 10875-11115 TX low ANSI
ECH-11-0490-032 ODU 600v2, 11 GHz, T-R 490/520/530MHz, 11365-11605 TX high ANSI
ECH-11-0490-E11 ODU 600v2, 11 GHz, T-R 490/500/520/530MHz, 10915-11200 TX low ETSI
ECH-11-0490-E12 ODU 600v2, 11 GHz, T-R 490/500/520/530MHz, 11425-11705 TX high ETSI
ECH-11-0530-E11 ODU 600v2, 11 GHz, T-R 490/500/520/530MHz, 10695-10995 TX low ETSI
ECH-11-0530-E12 ODU 600v2, 11 GHz, T-R 490/500/520/530MHz, 11200-11505 TX high ETSI
ECH-11-0490-E21 ODU 600v2, 11 GHz, T-R 490/520/530MHz, 10795-11035 TX low ETSI
ECH-11-0490-E22 ODU 600v2, 11 GHz, T-R 490/520/530MHz, 11285-11525 TX high ETSI
ECH-11-0490-E31 ODU 600v2, 11 GHz, T-R 490/520/530MHz, 10875-11115 TX low ETSI
ECH-11-0490-E32 ODU 600v2, 11 GHz, T-R 490/520/530MHz, 11365-11605 TX high ETSI
13 GHz


15 GHz
18 GHz
23 GHz
26 GHz
ECH-26-1008-011 ODU600V2, 26 GHz, T-R 1008MHz,24549-24997,TX LOW
ECH-26-1008-012 ODU600V2, 26 GHz, T-R 1008MHz,25557-26005,TX HIGH
28 GHz
ECH-28-1008-011 ODU600V2, 28 GHz, T-R 1008MHz,27500-27996.5,TX LOW
ECH-28-1008-012 ODU600V2, 28 GHz, T-R 1008MHz,27996.5-28510,TX LOW


ECH-28-1008-021 ODU600V2, 28 GHz, T-R 1008MHz,28508-29004.5,TX HIGH
ECH-28-1008-022 ODU600V2, 28 GHz, T-R 1008MHz,29004.5-29518,TX HIGH
32 GHz
38 GHz
42 GHz

ABBREVIATIONS
Term Definition
ACAP Adjacent Channel Alternate Polarization
ACCP Adjacent Channel Co-Polarization
AGC Automatic Gain Control
ARO After Receipt of Order
ATPC Automatic Transmit Power Control
AU Administrative Unit
AUX Auxiliary/Alarm I/O Card
BER Bit Error Rate
C/I Carrier to Interference ratio
CCDP Cochannel Dual Pole
CEPT Conference des Administrations Europennes des Postes et Telecommunications
CMI Coded Mark Inversion
DAC Data Access Card
DC Direct current
DRRS Digital Radio Relay Systems
EIRP Equivalent Isotropically Radiated Power
EMC ElectroMagnetic Compatibility
ESR Errored Second Ratio
FF Frequency Diversity
FSK Frequency-Shift Keying (modulation)
GHz Gigahertz
HH Hot Standby
HS Space Diversity
IDC Indoor Chassis
IDCe Indoor Chassis Extended
IDU Indoor Unit
IF Intermediate Frequency
INU Intelligent Node Unit
INUe Intelligent Node Unit Extended
LAN Local Area Network
MIB Management Information Base
MTBF Mean Time Between Failures
N/A Not Applicable
NCC Node Controller Card
NN Non-Protected
NPC Node Protection Card
ODU Outdoor Unit
PDH Plesiochronous Digital Hierarchy
PRBS Pseudo Random Binary Sequence
QAM Quadrature Amplitude Modulation
QPSK Quadrature Phase Shift Key Modulation
RAC Radio Access Card
RBER Residual Bit Error Rate
RSL Receive Signal Level
RSSI Received Signal Strength Indication
RU Rack Unit
RX Receive
SDH Synchronous Digital Hierarchy
SONET Synchronous Optical Network
TDM Time Division Multiplex
TX Transmit
XPIC Cross-Polar Interference Cancellation
XPD Cross/Polar Discrimination

WWW.AVIATNETWORKS.COM
Aviat, Aviat Networks and Aviat logo are trademarks or registered trademarks of Aviat Networks, Inc.
© Aviat Networks, Inc. 2020. All Rights Reserved.
Data subject to change without notice.

ODU600V2: Product Ordering Guide

Uploaded by

Copyright:

Available Formats

ODU600V2: Product Ordering Guide

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

ODU600V2: Product Ordering Guide

Uploaded by

Copyright:

Available Formats

What are the different frequency bands supported by the ODU600v2?

What are the different frequency bands supported by the ODU600v2?

What technical support options are available for customers?

What technical support options are available for customers?

AVIAT NETWORKS

Copyright © 2020 by Aviat Networks.

USA Europe, Middle East & Africa Asia/Pacific

San Antonio, TX Blantyre, Scotland, G72 0FB Clark Freeport Zone

Phone: +1 210 526 6345 United Kingdom Philippines 2023

Page 2 of 30 AVIAT NETWORKS April 2020

Tony Wood 26GHz Flex WG correction 4403-012 April 2020

Tony Wood Added Shenglu antennas 4403-013 Oct 2020

Page 3 of 30 AVIAT NETWORKS April 2020

About This Guide 5

ODU600v2 Product Summary 6

PART NUMBER SELECTION 8

Mixing 600v1 and V2 on OMT’s and Protection Couplers 18

REMOTE MOUNT ADAPTORS (ODU AND COUPLER ANTENNA PORT) 20

Page 4 of 30 AVIAT NETWORKS April 2020

ABOUT THIS GUIDE

ECLIPSE PRODUCT MANAGEMENT CONTACTS

Page 5 of 30 AVIAT NETWORKS April 2020

ODU600V2 PRODUCT SUMMARY

INTEROPERABILITY AND COMPATIBILITY

Page 6 of 30 AVIAT NETWORKS April 2020

Page 7 of 30 AVIAT NETWORKS April 2020

PART NUMBER SELECTION

ODU ORDERING DETAILS

Part Number Description Quantity

037-579300-001 EARTH STRAP, ODU, LUG M6 TO TWIN M6, 2m (6.5') 1

011-300000-001 SILICONE GREASE, 1/10 OZ SAMPLE SIZE, DC-4 1

Page 8 of 30 AVIAT NETWORKS April 2020

CABLE KIT OPTIONS

Page 9 of 30 AVIAT NETWORKS April 2020

ORDERING ACCESSORIES FOR LONGER CABLE RUNS 150 -300M

LIGHTNING ARRESTORS (LA)

CITEL INLINE TYPE

Part Number 179-530062-002

Page 10 of 30 AVIAT NETWORKS April 2020

This arrestor is supplied with a 1M long ground cable:

And a 2 hole termination lug:

HPX (POLYPHASER OUTLINE) TYPE

Part Number 074-301008-001

Supplied with 2m ground cable.

Page 11 of 30 AVIAT NETWORKS April 2020

Page 12 of 30 AVIAT NETWORKS April 2020

Page 13 of 30 AVIAT NETWORKS April 2020

Page 14 of 30 AVIAT NETWORKS April 2020

Example Part Size ETSI Customer

Page 15 of 30 AVIAT NETWORKS April 2020

Part Number Description Comment

Page 16 of 30 AVIAT NETWORKS April 2020

Aviat Item Item Description

Page 17 of 30 AVIAT NETWORKS April 2020

179-530512-018 Adaptor Kit Die-Cast ODU600v2 to ODU600V1 18/23 GHz

MIXING 600V1 AND V2 ON OMT’S AND PROTECTION

Page 18 of 30 AVIAT NETWORKS April 2020

Page 19 of 30 AVIAT NETWORKS April 2020

REMOTE MOUNT ADAPTORS (ODU AND COUPLER ANTENNA