0% found this document useful (0 votes)

63 views84 pages

DVD Home Theatre System: HT-7000DH

Uploaded by

Juan de Dios Hernandez

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

63 views84 pages

DVD Home Theatre System: HT-7000DH

Uploaded by

Juan de Dios Hernandez

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 84

lename[C:\Documents and masterpage:Right

Settings\pc13\Desktop\J9052007_2662265111HT7000DH_US\2662265111\US01COV_HT-7000DH-U.fm]

US01COV_HT-7000DH-U.book Page 1 Wednesday, January 25, 2006 3:30 PM

2-662-265-11 (1)

DVD Home
Theatre System
Operating Instructions

Owner’s Record
The model and serial numbers are located on the rear of the unit. Record the
serial number in the space provided below. Refer to them whenever you call
upon your Sony dealer regarding this product.
Model No. Serial No.

HT-7000DH
©2006 Sony Corporation

model name1[HT-7000DH]
[2-662-265-11 (1)]
C:\Documents and masterpage: Left
Settings\pc13\Desktop\J9052007_2662265111HT7000DH_US\2662265111\US02REG_HT-
7000DH-U.fm2-662-265-11 (1)
US01COV_HT-7000DH-U.book Page 2 Wednesday, January 25, 2006 3:30 PM

WARNING
WARNING This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
To reduce the risk of fire or electric to Part 15 of the FCC Rules. These limits are
shock, do not expose this apparatus to designed to provide reasonable protection against
rain or moisture. harmful interference in a residential installation.
To prevent fire, do not cover the ventilation of the This equipment generates, uses, and can radiate
apparatus with newspapers, table-cloths, curtains, radio frequency energy and, if not installed and used
etc. And don’t place lighted candles on the in accordance with the instructions, may cause
apparatus. harmful interference to radio communications.
To prevent fire or shock hazard, do not place objects However, there is no guarantee that interference will
filled with liquids, such as vases, on the apparatus. not occur in a particular installation. If this
equipment does cause harmful interference to radio
Do not install the appliance in a confined space,
or television reception, which can be determined by
such as a bookcase or built-in cabinet.
turning the equipment off and on, the user is
encouraged to try to correct the interference by one
Don’t throw away batteries with
or more of the following measures:
general house waste; dispose of
– Reorient or relocate the receiving antenna.
them correctly as chemical waste.
– Increase the separation between the equipment
and receiver.
– Connect the equipment into an outlet on a circuit
For customers in the United
different from that to which the receiver is
States connected.
– Consult the dealer or an experienced radio/TV
technician for help.

CAUTION
You are cautioned that any changes or modification
not expressly approved in this manual could void
your authority to operate this equipment.

Note to CATV system installer:

This reminder is provided to call CATV system
This symbol is intended to alert the
installer’s attention to Article 820-40 of the NEC
user to the presence of uninsulated
that provides guidelines for proper grounding and, in
“dangerous voltage” within the
particular, specifies that the cable ground shall be
product’s enclosure that may be of
connected to the grounding system of the building,
sufficient magnitude to constitute a
as close to the point of cable entry as practical.
risk of electric shock to persons.
This symbol is intended to alert the
user to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.

2US

HT-7000DH
2-662-265-11 (1)
C:\Documents and Settings\pc13\Desktop\Data_HT- masterpage: Right
7000DH\J9052007_2662265111HT7000DH_US\2662265111\US02REG_HT-7000DH-U.fm

About This Manual Note for the supplied remote

• The instructions in this manual are for model (RM-AAP012)
HT-7000DH. The 12 button on the remote is not available
The HT-7000DH consists of: for receiver operation.
• Receiver STR-K7000
• DVD player DVP-NC85H
• Speaker system
– Front speaker SS-MSP7000
– Center speaker SS-CNP900
– Surround speaker SS-SRP7000
– Sub woofer SA-WP780
• The instructions in this manual describe the
controls on the supplied remote. You can also use
the controls on the receiver if they have the same
or similar names as those on the remote.

About area codes

The area code of the receiver you purchased is
shown on the lower right portion of the rear panel
(see the illustration below).

CENTER

+ –

SPEAKERS

L L

R L

+ – + –

R R
SURROUND FRONT A R L
SPEAKERS FRONT B
SPEAKERS

Area code

Any differences in operation, according to the area

code, are clearly indicated in the text, for example,
“Models of area code AA only”.

This receiver incorporates Dolby* Digital and Pro

Logic Surround and the DTS** Digital Surround
System.
* Manufactured under license from Dolby
Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol
are trademarks of Dolby Laboratories.
** “DTS” and “DTS Digital Surround” are
trademarks of Digital Theater Systems, Inc.

This receiver incorporates High-Definition

Multimedia Interface (HDMITM) technology.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.

The XM name and related logos are registered

trademarks of XM Satellite Radio Inc.

3US

HT-7000DH
2-662-265-11 (1)
C:\Documents and masterpage: Left
Settings\pc13\Desktop\J9052007_2662265111HT7000DH_US\2662265111\US01COV_HT-
7000DH-UTOC.fm
US01COV_HT-7000DH-U.book Page 4 Wednesday, January 25, 2006 3:30 PM

Table of Contents

Getting Started Enjoying Surround Sound

Description and location of parts...................5 Enjoying Dolby Digital and DTS Surround
1: Installing speakers ...................................14 sound (AUTO FORMAT DIRECT)....... 48
2: Connecting speakers................................16 Selecting a pre-programmed sound field .... 50
3a: Connecting the audio components.........18 Using only the front speakers and
3b: Connecting the video components ........21 sub woofer (2CH STEREO) .................. 52
4: Connecting the antennas..........................28 Resetting sound fields to the initial
5: Preparing the receiver and the remote .....29 settings ................................................... 53
6: Selecting the speaker system ...................30
7: Calibrating the appropriate settings Tuner Operations
automatically
(AUTO CALIBRATION) .......................31 Listening to FM/AM radio.......................... 53
8: Adjusting the speaker levels and Presetting radio stations .............................. 55
balance (TEST TONE) ...........................34 Listening to the XM Radio ......................... 57
Presetting XM Radio stations ..................... 61

Playback
Selecting a component.................................35
Other Operations
Listening/Watching a component ................37 Switching the audio input mode
(INPUT MODE) .................................... 64
Watching component images from
Amplifier Operations other inputs
Navigating through menus...........................39 (COMPONENT VIDEO ASSIGN) ....... 64
Adjusting the level (LEVEL menu).............42 Watching HDMI images from other
Adjusting the tone (TONE menu) ...............43 inputs (HDMI ASSIGN)........................ 65
Settings for the surround sound Naming inputs............................................. 66
(SUR menu)............................................43 Changing the display .................................. 67
Settings for the tuner (TUNER menu).........44 Using the Sleep Timer ................................ 67
Settings for the audio (AUDIO menu).........44 Recording using the receiver....................... 68
Settings for the video (VIDEO menu).........45
Settings for the system (SYSTEM menu) ...46
Using the Remote
Calibrating the appropriate settings
automatically (A. CAL menu)................48 Programming the remote ............................ 69

Additional Information
Glossary ...................................................... 72
Precautions.................................................. 73
Troubleshooting .......................................... 75
Specifications.............................................. 78
Index ........................................................... 82

4US

HT-7000DH
2-662-265-11 (1)
C:\Documents and masterpage: Right
Settings\pc13\Desktop\J9052007_2662265111HT7000DH_US\2662265111\US03CON_HT-
7000DH-U.fm
US01COV_HT-7000DH-U.book Page 5 Wednesday, January 25, 2006 3:30 PM

Getting Started

Getting Started
Description and location of parts
Receiver

Front panel
1 2 3 4 5 6 7 8

?/1
MASTER VOLUME
MULTI CHANNEL DECODING
DISPLAY INPUT MODE

INPUT SELECTOR

SPEAKERS
(OFF/A/B/A+B)

AUTO CAL MIC

MEMORY/ TUNING
ENTER MODE TUNING 2CH A.F.D. MOVIE MUSIC MULTI CH IN MUTING
VIDEO 3 IN/PORTABLE AV IN
PHONES

VIDEO L AUDIO R

w; ql qk qj qh qg qf qd qs qa q; 9

PUSH

To remove the cover Name Function

Press PUSH.
When you remove the cover, keep it out of A ?/1 Press to turn the receiver on
or off (page 29, 37, 38, 53,
reach from children. 79).
B SPEAKERS Press to select OFF, A, B,
(OFF/A/B/A+B) A+B of the front speakers
(page 30).
C Display The current status of the
selected component or a list
of selectable items appears
here (page 7).
D MULTI Lights up when multi
CHANNEL channel audio is decoded
DECODING (page 38).
lamp

continued
5US

HT-7000DH
2-662-265-11 (1)
C:\Documents and masterpage: Left
Settings\pc13\Desktop\J9052007_2662265111HT7000DH_US\2662265111\US03CON_HT-
7000DH-U.fm
US01COV_HT-7000DH-U.book Page 6 Wednesday, January 25, 2006 3:30 PM

Name Function Name Function

E Remote sensor Receives signals from R VIDEO 3 IN/ To connect a camcorder or
remote commander. PORTABLE AV IN video game (page 27, 35).
jacks
F DISPLAY Press to select information
displayed on the display S AUTO CAL MIC Connects to the supplied
(page 67). jack ECM-AC2 optimizer
microphone for the Auto
G INPUT MODE Press to select the input
Calibration function (page
mode when the same
31).
components are connected
to both digital and analog T PHONES jack Connects to a headphone
jacks (page 64). (page 75).
H MASTER Turn to adjust the volume
VOLUME level of all speakers at the
same time (page 34, 35,
37, 38).
I MUTING Press to mute the sound
(page 35).
J MULTI CH IN Press to select the audio
directly from the
components connected to
the MULTI CH IN jacks
(page 35).
K INPUT Turn to select the input
SELECTOR source to playback (page
35, 37, 38, 54, 56, 64, 66,
68).
L MOVIE, Press to select sound fields
MUSIC (MOVIE, MUSIC) (page
50).
M A.F.D. Press to select A.F.D.
mode (page 48).
N 2CH Press to select 2CH
STEREO mode (page 52,
53).
O TUNING +/– Press to scan a station
(page 54, 55).
P TUNING MODE Press to select the tuning
mode (page 56, 79).
Q MEMORY/ENTER Press to store a station or
enter the selection when
selecting the settings
(page 29).

6US

About the indicators on the display

1 2 3 4 5 6 7

Getting Started
SW LFE SP A ; DIGITAL ;PRO LOGIC II DTS CAT MEMORY
SP B SLEEP OPT COAX HDMI D.RANGE STEREO MONO
L C R
SL S SR
qf qd qs qa q; 9
qg
8

Name Function Name Function

A SW Lights up when the audio signal F DTS Lights up when DTS signals are
is output from the SUB input.
WOOFER jack. Note
When playing a DTS format
B LFE Lights up when the disc being
disc, be sure that you have made
played back contains an LFE
digital connections and that
(Low Frequency Effect)
INPUT MODE is not set to
channel and the LFE channel
“ANALOG” (page 64).
signal is actually being
reproduced. G MEMORY Lights up when a memory
function, such as Preset
C SP A/SP B Lights up according to the
Memory (page 55), etc., is
speaker system used. However,
activated.
these indicators do not light up
if the speaker output is turned H Preset Lights up when using the
off or if a headphone is station receiver to tune in radio stations
connected. indicators you have preset. For details on
presetting radio stations, see
D ;DIGITAL Lights up when Dolby Digital
page 55.
signals are input.
Note I Tuner Lights up when using the
When playing a Dolby Digital indicators receiver to tune in radio stations
format disc, be sure that you (page 53), etc.
have made digital connections
and that INPUT MODE is not J D.RANGE Lights up when dynamic range
compression is activated (page
set to “ANALOG” (page 64).
40).
E ;PRO Lights up when the receiver
K HDMI Flashes when you select
LOGIC (II) applies Pro Logic processing to
“HDMI A.” in the VIDEO
2 channel signals in order to
menu (page 65).
output the center and surround
channel signals. “; PRO L COAX Lights up when INPUT MODE
LOGIC II” lights up when the is set to “AUTO” and the source
Pro Logic II Movie or Music signal is a digital signal being
decoder is activated. input through the COAXIAL
Note jack, or when INPUT MODE is
Dolby Pro Logic and Dolby Pro set to “COAX IN” (page 64).
Logic II decoding do not
function for DTS format
signals.

continued
7US

Name Function
M OPT Lights up when INPUT MODE
is set to “AUTO” and the source
signal is a digital signal being
input through the OPTICAL
jack, or when INPUT MODE is
set to “OPT IN” (page 64).
N SLEEP Lights up when the sleep timer
is activated (page 67).
O Playback The letters (L, C, R, etc.)
channel indicate the channels being
indicators played back. The boxes around
the letters vary to show how the
receiver downmixes the source
sound.
L Front Left
R Front Right
C Center (monaural)
SL Surround Left
SR Surround Right
S Surround (monaural or the
surround components obtained
by Pro Logic processing)
Example:
Recording format (Front/
Surround): 3/2.1
Sound Field: A.F.D. AUTO

L C R
SL SR

8US

Rear panel
1 2 3

Getting Started
DIGITAL DVD IN VIDEO 2 IN MONITOR OUT COMPONENT VIDEO CENTER
OPTICAL ASSIGNABLE
VIDEO 1 ANTENNA Y
IN XM
ASSIGNABLE
VIDEO 2 + –
IN HDMI MONITOR PB/CB
/B–Y
SPEAKERS
AM
PR/CR
/R–Y
VIDEO IN VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT DVD VIDEO 2 MONITOR
IN IN OUT

L L
DVD
IN R L
COAXIAL
L L L L + – + –
L AUDIO
CENTER OUT

R R
R R R R R
IN OUT IN AUDIO IN AUDIO IN AUDIO OUT AUDIO IN SUB SURROUND FRONT A R L
FRONT SURROUND WOOFER SUB FRONT B
SA-CD/CD MD/TAPE DVD VIDEO 2 VIDEO 1 SPEAKERS
MULTI CH IN WOOFER SPEAKERS

6 5 4

A DIGITAL INPUT section C COMPONENT VIDEO INPUT/

OPTICAL Connects to a DVD OUTPUT section
IN jack player, etc. The COMPONENT Connects to a DVD
COAXIAL jack Green
VIDEO player, TV, or a
provides a better INPUT/ satellite tuner. You
COAXIAL IN quality of loud Blue OUTPUT can enjoy high
jack sound (page 23, jacka) quality image
26). Red (page 22, 24, 26).
HDMI IN/ Connects to a DVD
MONITOR player, or a satellite
OUT jacka) tuner. The image D SPEAKER section
and the sound are Connects to
output to a TV or a speakers (page 16).
projector (page
25).

B VIDEO/AUDIO INPUT/OUTPUT
section
AUDIO IN/ Connects the video Connects to sub
White (L) OUT jack and audio jacks of
woofer (page 16).
a VCR or a DVD
Red (R) player (page 22,
23, 24, 26, 27).
VIDEO IN/
Yellow OUT jacka)

continued
9US

E AUDIO INPUT/OUTPUT section

Remote commander
AUDIO IN/ Connects to an MD
White (L) OUT jack deck or CD player, You can use the supplied remote RM-AAP012
etc. (page 20). to operate the receiver and to control the Sony
Red (R)
audio/video components that the remote is
assigned to operate. You can also program the
MULTI Connects to a
White (L) CHANNEL Super Audio CD
remote to control non-Sony audio/video
INPUT jack player or DVD components. For details, see “Programming
Red (R) player which has the remote” (page 69).
an analog audio
AV ?/1
Black jack for 5.1 wl 1 (on/standby)
TV ?/1 AV ?/1 ?/1
channel sound RM SET UP P switch
(page 19). TV ?/1 wk 2 ?/1 (on/standby)
(on/standby) switch
SYSTEM STANDBY SLEEP
switch
VIDEO1 VIDEO2 VIDEO3 DVD

F ANTENNA section wj MD/TAPE SA-CD/CD TUNER AUX

FM Connects to the
ANTENNA FM wire antenna MULTI CH

3
supplied with this
2CH A.F.D. MOVIE MUSIC
receiver (page 28). 4
1 2 3
DUAL CATEGORY
AM Connects to the CATEGORY MONO MODE
5
4 5 6
ANTENNA AM loop antenna wh AUDIO ANGLE JUMP/ PRESET/
TIME CH/D.SKIP
TUNING
supplied with this 7 8 9
receiver (page 28). MEMORY SUBTITLE ENTER 6
. >
0/10 >10/11 12
XM Connects to the D.TUNING DISC ALT

XM connect-and- wg m M - 7
ANT CLEAR SEARCH MODE
Play antenna (not wf 8
supplied with this wd H X x 9
receiver) (page ws TOP MENU/
GUIDE AV MENU
MUTING

58). q;
wa F MASTER
VOL

a) Youcan watch the selected input image when you w; G g

connect the MONITOR OUT jack to a TV monitor f

qa
ql O
(page 22). DISPLAY RETURN/EXIT
qk TV/ AMP
TV VOL TV CH VIDEO MENU
qs
qj WIDE
AUTO
CAL qd
qf
qh qg

Name Function
A AV ?/1 Press to turn on or off the
audio/video components that
the remote is programmed to
operate.
If you press ?/1 (B) at the
same time, it will turn off the
receiver and other
components (SYSTEM
STANDBY).
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
buttons (wj).

10US

Name Function Name Function

B ?/1 Press to turn the receiver on or J MUTING Press to mute the sound.

Getting Started
off.
K MASTER Press to adjust the volume level
To turn off all components,
VOL +a)/– of all speakers at the same time.
press ?/1 and AV ?/1 (A) at
the same time (SYSTEM L AMP MENU Press to display the menu of the
STANDBY). receiver. Then, use the control
buttons to perform menu
SLEEP Press ALT (G) and then press
operations.
SLEEP to activate the Sleep
Timer function and the duration M TV/VIDEO Press to select the input signal
which the receiver turns off (TV input or video input).
automatically.
N AUTO CAL Press to activate the Auto
C MULTI CH Press to select the audio directly Calibration function.
from the components connected
O WIDE Press ALT (G) and then press
to the MULTI CH IN jacks.
WIDE to select the wide picture
D MUSIC Press to select sound fields mode.
(MUSIC).
P TV CH +a)/– Press to select preset TV
E CATEGORY Press to select the category channels.
MODE mode for XM Radio.
Q TV VOL Press to adjust the TV volume
F PRESET/ Press to +a)/– level.
CH/D.SKIP – select preset stations.
R RETURN/ Press to
+/– – select preset channels of the EXIT O – return to the previous menu.
TV, VCR, satellite tuner, Blu- – exit the menu while the menu
ray disc recorder, or hard disc or on-screen guide of the
recorder. VCD player, LD player, DVD
– skip disc of the CD player, player, Blu-ray disc recorder,
VCD player, DVD player, hard disc recorder, PSX, or
MD deck, or LD player satellite tuner is displayed on
(multi-disc changer only). the TV screen.
G ALT Press to light up the button. It S DISPLAY Press to select information
changes the remote key displayed on the TV screen of
function to activate the buttons the TV, VCR, VCD player, LD
with orange printing. player, DVD player, CD player,
H -/-- Press to select the channel entry MD deck, Blu-ray disc
mode, either one or two digit of recorder, hard disc recorder,
the TV, Blu-ray disc recorder, PSX, or satellite tuner.
hard disc recorder, PSX, or T Control After pressing AMP MENU
satellite tuner. buttons (L), TOP MENU/GUIDE
DISC Press to select a disc directly of (U), or AV MENU (V), press
the CD player or VCD player the control button V, v, B or b
(multi-disc changer only). to select the settings. When you
press TOP MENU/GUIDE or
SEARCH Press to select the searching AV MENU, press the control
MODE mode or unit for search (tracks, button to enter the selection.
index, etc.) of the DVD player.
U TOP MENU/ Press to display the
I x Press to stop playback of the GUIDE – DVD title.
VCR, CD player, VCD player, – menu or on-screen guide of
LD player, DVD player, MD the satellite tuner, Blu-ray
deck, DAT deck, tape deck, Blu- disc recorder, hard disc
ray disc recorder, hard disc recorder, or PSX on the TV
recorder, or PSX. screen.
Then, use the control buttons to
perform menu operation.

continued
11US

Name Function Name Function

V AV MENU Press to display the menus of the Z TUNING +/– Press to scan a station.
VCR, DVD player, satellite ./> Press to skip tracks of the
tuner, Blu-ray disc recorder, VCR, CD player, VCD player,
hard disc recorder, or PSX on the LD player, DVD player, MD
TV screen. Then, use the control deck, DAT deck, tape deck,
buttons to perform menu Blu-ray disc recorder, hard
operations. disc recorder, or PSX.
W Ha) Press to start playback of the 2CH Press to select 2CH STEREO
VCR, CD player, VCD player, mode.
LD player, DVD player, MD
deck, DAT deck, tape deck, Blu- A.F.D. Press to select A.F.D. mode.
ray disc recorder, hard disc MOVIE Press to select sound fields
recorder, or PSX. (MOVIE).
X X Press to pause playback or CATEGORY Press to select the category for
recording of the VCR, CD +/– XM Radio.
player, VCD player, LD player, DUAL MONO Press to select the language
DVD player, MD deck, DAT you want during digital
deck, tape deck, Blu-ray disc broadcast.
recorder, hard disc recorder, or
PSX. (Also starts recording with AUDIO Press to change the sound to
components in recording Multiplex, Bilingual or Multi
standby.) channel TV sound of the TV,
VCR, DVD player, satellite
Y m/M Press to tuner, Blu-ray disc recorder,
– search tracks in the forward/ hard disc recorder, or PSX.
backward direction of the CD
player, VCD player, DVD ANGLE Press to select the viewing
player, LD player, MD deck, angle or change the angles of
Blu-ray disc recorder, hard the DVD player or Blu-ray
disc recorder, or PSX. disc recorder.
– fast forward/rewind of the JUMP/TIME Press to
VCR, DAT deck, or tape deck. – toggle between the previous
D. TUNING Press to enter direct tuning and the current channels of
mode. the satellite tuner, TV, or
Blu-ray disc recorder.
ANT Press ALT (G) and then press – show the time or display the
ANT to select the signal to be playing time of a disc, etc. of
output from the antenna terminal the CD player, MD deck,
of the VCR or satellite tuner (TV VCD player, or DVD player.
signal or video signal).
MEMORY Press MEMORY to store a
CLEAR Press ALT (G) and then press station.
CLEAR to SUBTITLE Press ALT (G) and then press
– clear a mistake when you press SUBTITLE to change the
the incorrect numeric button. subtitles of the DVD player.
– return to continuous playback,
etc. of the CD player, DVD ENTER Press ALT (G) and then press
player, Blu-ray disc recorder, ENTER to enter the value
PSX, or satellite tuner. after selecting a channel, disc
or track using the numeric
buttons.

12US

Name Function Name Function

wh Numeric Press ALT (G) and then press wk TV ?/1 Press to turn the TV on or off.

Getting Started
buttons the numeric buttons to wl RM SET UP Press to set up the remote.
– preset/tune to preset
stations. a) TheMASTER VOL +, TV VOL +, TV CH + and
– select track numbers of the H buttons have tactile dots. Use the tactile dots as
CD player, VCD player, LD
references when operating the receiver.
player, DVD player, MD
deck, DAT deck, or tape Notes
deck. Press 0/10 to select
• Some functions explained in this section may not
track number 10.
– select channel numbers of work depending on the model.
the TV, VCR, satellite tuner, • The above explanation is intended to serve as an
Blu-ray disc recorder, hard example only. Therefore, depending on the
disc recorder, or PSX. component, the above operation may not be
possible or may operate differently than described.
>10/11 Press ALT (G) and then press
>10/11 to select track • The 12 button on the remote is not available for
numbers over 10 of the CD receiver operation.
player, VCD player, LD
player, MD deck, tape deck,
TV, VCR, Blu-ray disc
recorder, hard disc recorder,
PSX, or satellite tuner.
wj Input buttons Press one of the buttons to
select the component you
want to use. When you press
any of the input buttons, the
receiver turns on. The buttons
are factory assigned to control
Sony components as follows.
You can program the remote
to control non-Sony
components following the
steps in “Programming the
remote” on page 69.

Button Assigned Sony

component
VIDEO1 VCR (VTR mode 3)
VIDEO2 VCR (VTR mode 1)
VIDEO3 VCR (VTR mode 2)
DVD DVD player
MD/TAPE MD deck
SA-CD/CD Super Audio CD/CD
player
TUNER Built-in tuner
AUX Not assigned

13US

1: Installing speakers
To fully enjoy theater-like multi channel
surround sound requires five speakers (two Installing the speakers on a flat
front speakers, a center speaker, and two surface
surround speakers) and a sub woofer (5.1
Before you install the speakers and sub
channel).
woofer, be sure to attach the supplied foot pads
to prevent vibration or movement as shown in
Example of a 5.1 channel the illustration below.
speaker system configuration

Installing the speakers on the

speaker stand
For greater flexibility in positioning the
speakers, use the optional WS-FV11 speaker
stand (available only in certain countries). For
details, refer to the operating instructions
supplied with the speaker stand

AFront speaker (L)

BFront speaker (R)
CCenter speaker
DSurround speaker (L)
ESurround speaker (R)
FSub woofer

Tip
Since the sub woofer does not emit highly
directional signals, you can place it wherever you
want.

14US

3 Hang the speakers on the

Installing the speakers on the screws.
wall

Getting Started
Hook on the back of the speaker
You can install your surround speakers on the 4.6 mm
wall. (3/16 inch)

1 Prepare screws (not supplied) 10 mm

(13/32 inch)
that are suitable for the hook on
the back of each speaker as
shown in the illustrations
below.

more than 4 mm
(5/32 inch)

more than 25 mm (1 inch)

4.6 mm
(3/16 inch)
Notes
10 mm
• Use screws that are suitable for the wall material
(13/32 inch) and strength. As a plaster board wall is especially
fragile, attach the screws securely to a beam and
Hook on the back of the speaker fasten them to the wall. Install the speakers on a
vertical and flat wall where reinforcement is
2 Fasten the screws to the wall. applied.
• Contact a screw shop or installer regarding the wall
The screws should protrude 5 material or screws to be used.
to 7 mm. • Sony is not responsible for accident or damage
caused by improper installation, insufficient wall
strength or improper screw installation, natural
calamity, etc.

5 to 7 mm
(7/32 to 9/32 inch)

15US

2: Connecting speakers
F C

A B
SPEAKERS FRONT Ba)

DVD IN VIDEO 2 IN MONITOR OUT COMPONENT VIDEO CENTER

ASSIGNABLE

ASSIGNABLE
+ –
HDMI MONITOR PB/CB
/B–Y
SPEAKERS
PR/CR
/R–Y
VIDEO IN VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT DVD VIDEO 2 MONITOR
IN IN OUT

L L

R L

L L L L + – + –
AUDIO
CENTER OUT

R R R R R R
OUT IN AUDIO IN AUDIO IN AUDIO OUT AUDIO IN SUB SURROUND FRONT A R L
FRONT SURROUND WOOFER SUB FRONT B
MD/TAPE DVD VIDEO 2 VIDEO 1 SPEAKERS
MULTI CH IN WOOFER SPEAKERS

D E B A

A Monaural audio cord (supplied)

B Speaker cords (supplied)b)
a) If
AFront speaker A (L) you have an additional front speaker system,
BFront speaker A (R) connect them to the SPEAKERS FRONT B
terminal. You can select the front speakers you
CCenter speaker
want to use with the SPEAKERS (OFF/A/B/A+B)
DSurround speaker (L) button. For details, see “6: Selecting the speaker
ESurround speaker (R) system” (page 30).
b) Use the long speaker cords to connect the surround
FSub woofer
speakers and the short speaker cords to connect the
front and center speakers.

16US

To connect the speakers

correctly
Check the speaker type by referring to the

Getting Started
speaker label* on the rear panel of the
speakers.
Character on Speaker type
speaker label
L Front left
R Front right
SL Surround left
SR Surround right
* The center speaker and sub woofer do not have any
character on the speaker label. For details on the
speaker type, see page 3.

Tip
Use the supplied speakers to optimize the system’s
performance.

17US

3a: Connecting the audio components

How to hook up your Audio input/output jack to be
components connected
This section describes how to hook up your The sound quality depends on the connecting
components to this receiver. Before you begin, jack. Refer to the illustration that follows.
refer to “Component to be connected” below Select the connection according to the jacks of
for the pages which describe how to connect your components.
each component.
After hooking up all your components,
proceed to “4: Connecting the antennas” (page
28). Digital

Component to be connected
Component With Page
L
Super Audio Multi-channel audio 19 High
CD player/CD outputa) CENTER quality
sound
player R
Analog audio output 20 SUB
FRONT SURROUND WOOFER
onlyb) MULTI CH IN

Analog
MD deck/Tape Analog audio output 20
deck onlyb)
a) Model with MULTI CH OUTPUT jacks, etc. This

connection is used to output audio decoded by the

component’s internal multi-channel decoder
through this receiver.
b)
Model equipped only with AUDIO OUT L/R
jacks, etc.

18US

Note
Connecting components with When you make connections to the MULTI CH IN
multi channel output jacks jacks, you will need to adjust the level of the

Getting Started
speakers and sub woofer using the controls on the
If your DVD or Super Audio CD player is connected component.
equipped with multi channel output jacks, you
can connect it to the MULTI CH IN jacks of
this receiver to enjoy multi channel sound.
Alternatively, the multi channel input jacks
can be used to connect an external multi
channel decoder.

DVD player, Super

Audio CD player, etc.

A B

DIGITAL DVD IN VIDEO 2 IN MONITOR OUT COMPONENT VIDEO CENTER

OPTICAL ASSIGNABLE
VIDEO 1 ANTENNA Y
IN XM
ASSIGNABLE
VIDEO 2 + –
IN HDMI MONITOR PB/CB
/B–Y
SPEAKERS
AM
PR/CR
/R–Y
VIDEO IN VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT DVD VIDEO 2 MONITOR
IN IN OUT

L L
DVD
IN
COAXIAL
L L L L + – + –
L AUDIO
CENTER OUT

R R
R R R R R
IN OUT IN AUDIO IN AUDIO IN AUDIO OUT AUDIO IN SUB SURROUND FRONT A
FRONT SURROUND WOOFER SUB
SA-CD/CD MD/TAPE DVD VIDEO 2 VIDEO 1 SPEAKERS
MULTI CH IN WOOFER

A Audio cord (not supplied)

B Monaural audio cord (not supplied)

19US

Connecting components with

analog audio jacks
The following illustration shows how to
connect a component which has analog jacks
such as tape deck, etc.

Super Audio MD deck/

CD player/ Tape deck
CD player

A A

DIGITAL DVD IN VIDEO 2 IN MONITOR OUT COMPONENT VIDEO CENTER

OPTICAL ASSIGNABLE
VIDEO 1 ANTENNA Y
IN XM
ASSIGNABLE
VIDEO 2 + –
IN HDMI MONITOR PB/CB
/B–Y
SPEAKERS
AM
PR/CR
/R–Y
VIDEO IN VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT DVD VIDEO 2 MONITOR
IN IN OUT

L L
DVD
IN
COAXIAL
L L L L + – + –
L AUDIO
CENTER OUT

R R
R R R R R
IN OUT IN AUDIO IN AUDIO IN AUDIO OUT AUDIO IN SUB SURROUND FRONT A
FRONT SURROUND WOOFER SUB
SA-CD/CD MD/TAPE DVD VIDEO 2 VIDEO 1 SPEAKERS
MULTI CH IN WOOFER

A Audio cord (not supplied)

20US

3b: Connecting the video components

Getting Started
TV monitor, etc.
How to hook up your INPUT jack COMPONENT
components HDMI VIDEO VIDEO

This section describes how to hook up your

components to this receiver. Before you begin,
refer to “Component to be connected” below Receiver
for the pages which describe how to connect MONITOR OUT COMPONENT
jack HDMI VIDEO VIDEO
each component.
After hooking up all your components,
proceed to “4: Connecting the antennas” (page
28).
COMPONENT
HDMI VIDEO VIDEO
Component to be connected Receiver INPUT
Component Page jack

TV monitor 22 Video component

OUTPUT jack COMPONENT
DVD player/DVD recorder 23 HDMI VIDEO VIDEO
Satellite tuner 26
With HDMI jack 25
VCR 27
High quality image
Camcorder, video game, etc. 27

Notes
• Connect image display components such as a TV
Video input/output jack to be monitor or a projector to the MONITOR OUT jack
connected on the receiver.
• Turn on the receiver when the video and audio of a
The image quality depends on the connecting playback component are being output to a TV
jack. Refer to the illustration that follows. through the receiver. If the power supply of the
Select the connection according to the jacks on receiver is not on, neither video nor audio is
your components. transmitted.

Reassigning video input signals

to another input
Component video input signals can be
reassigned to another input (page 64). You can
also reassign the HDMI input to another input
(page 65).

21US

Notes
Hooking up a TV monitor • Connect image display components such as a TV
monitor or a projector to the MONITOR OUT jack
The image from a visual component connected on the receiver.
to this receiver can be displayed on a TV • Turn on the receiver when the video and audio of a
screen. playback component are being output to a TV via
It is not necessary to connect all the cables. the receiver. If the power supply of the receiver is
Connect video cords according to the jacks of not turned on, neither video nor audio is
your components. transmitted.

Tip
You can watch the selected input image when you
connect the MONITOR OUT jack to a TV monitor.

TV monitor

A B

DIGITAL DVD IN VIDEO 2 IN MONITOR OUT COMPONENT VIDEO CENTER

OPTICAL ASSIGNABLE
VIDEO 1 ANTENNA Y
IN XM
ASSIGNABLE
VIDEO 2 + –
IN HDMI MONITOR PB/CB
/B–Y
SPEAKERS
AM
PR/CR
/R–Y
VIDEO IN VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT DVD VIDEO 2 MONITOR
IN IN OUT

L L
DVD
IN
COAXIAL
L L L L + – + –
L AUDIO
CENTER OUT

R R
R R R R R
IN OUT IN AUDIO IN AUDIO IN AUDIO OUT AUDIO IN SUB SURROUND FRONT A
FRONT SURROUND WOOFER SUB
SA-CD/CD MD/TAPE DVD VIDEO 2 VIDEO 1 SPEAKERS
MULTI CH IN WOOFER

A Video cord (not supplied)

B Component video cord (not supplied)

22US

Notes
Hooking up a DVD player/DVD • To input multi channel digital audio from the DVD
recorder player, set the digital audio output setting on the

Getting Started
DVD player. Refer to the operating instructions
The following illustration shows how to supplied with the DVD player.
connect a DVD player/DVD recorder. • When connecting optical digital cords, insert the
It is not necessary to connect all the cables. plugs straight in until they click into place.
Connect audio and video cords according to • Do not bend or tie the optical digital cords.
the jacks of your components. Tip
All the digital audio jacks are compatible with
1 Connecting audio 32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.

DVD player DVD recorder

C
A B B

DIGITAL DVD IN VIDEO 2 IN MONITOR OUT COMPONENT VIDEO CENTER

OPTICAL ASSIGNABLE
VIDEO 1 ANTENNA Y
IN XM
ASSIGNABLE
VIDEO 2 + –
IN HDMI MONITOR PB/CB
/B–Y
SPEAKERS
AM
PR/CR
/R–Y
VIDEO IN VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT DVD VIDEO 2 MONITOR
IN IN OUT

L L
DVD
IN
COAXIAL
L L L L + – + –
L AUDIO
CENTER OUT

R R
R R R R R
IN OUT IN AUDIO IN AUDIO IN AUDIO OUT AUDIO IN SUB SURROUND FRONT A
FRONT SURROUND WOOFER SUB
SA-CD/CD MD/TAPE DVD VIDEO 2 VIDEO 1 SPEAKERS
MULTI CH IN WOOFER

A Coaxial digital cord (supplied)

B Audio cord (not supplied)
C Optical digital cord (not supplied)

continued
23US

2 Connecting video

DVD player

A B

DIGITAL DVD IN VIDEO 2 IN MONITOR OUT COMPONENT VIDEO CENTER

OPTICAL ASSIGNABLE
VIDEO 1 ANTENNA Y
IN XM
ASSIGNABLE
VIDEO 2 + –
IN HDMI MONITOR PB/CB
/B–Y
SPEAKERS
AM
PR/CR
/R–Y
VIDEO IN VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT DVD VIDEO 2 MONITOR
IN IN OUT

L L
DVD
IN
COAXIAL
L L L L + – + –
L AUDIO
CENTER OUT

R R
R R R R R
IN OUT IN AUDIO IN AUDIO IN AUDIO OUT AUDIO IN SUB SURROUND FRONT A
FRONT SURROUND WOOFER SUB
SA-CD/CD MD/TAPE DVD VIDEO 2 VIDEO 1 SPEAKERS
MULTI CH IN WOOFER

DVD recorder

A Video cord (not supplied)

B Component video cord (not supplied)

If you connect a DVD recorder • You can also rename the VIDEO 1 input so
• Be sure to change the factory setting of the that it can be displayed on the receiver’s
VIDEO 1 input button on the remote so that display. For details, see “Naming inputs”
you can use the button to control your DVD (page 66).
recorder. For details, see “Programming the
remote” (page 69).

24US

The sound is output from the TV speaker only

Hooking up components with when a playback component and this receiver,
HDMI jacks as well as this receiver and the TV are

Getting Started
connected via a HDMI jack. To output the
HDMI is the abbreviated name for High-
sound from the supplied speakers and to take
Definition Multimedia Interface. It is an
advantage of the multi channel surround
interface which transmits video and audio
sound, be sure to
signals in digital format.
– connect the digital audio jacks on the
playback component to the receiver.
– turn off or mute the TV’s volume.

DVD player Satellite tuner TV monitor, projector, etc.

A A A

DIGITAL DVD IN VIDEO 2 IN MONITOR OUT COMPONENT VIDEO CENTER

OPTICAL ASSIGNABLE
VIDEO 1 ANTENNA Y
IN XM
ASSIGNABLE
VIDEO 2 + –
IN HDMI MONITOR PB/CB
/B–Y
SPEAKERS
AM
PR/CR
/R–Y
VIDEO IN VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT DVD VIDEO 2 MONITOR
IN IN OUT

L L
DVD
IN
COAXIAL
L L L L + – + –
L AUDIO
CENTER OUT

R R
R R R R R
IN OUT IN AUDIO IN AUDIO IN AUDIO OUT AUDIO IN SUB SURROUND FRONT A
FRONT SURROUND WOOFER SUB
SA-CD/CD MD/TAPE DVD VIDEO 2 VIDEO 1 SPEAKERS
MULTI CH IN WOOFER

A HDMI cable (not supplied)

We recommend that you use a Sony HDMI cable.

Notes on HDMI connections • Audio signals (sampling frequency, bit

• The multi/stereo area audio signals of a length, etc.) transmitted from a HDMI jack
Super Audio CD are not output. may be restricted by the connected
• Turn on the receiver when the video and component. Check the setup of the
audio of a playback component are being connected component if the image is poor or
output to a TV via the receiver. If the power the sound does not come out of a component
supply of the receiver is not turned on, connected via the HDMI cable.
neither video nor audio is transmitted. • Refer to the operating instructions of each
component connected for details.

25US

Notes
Hooking up a satellite tuner • When connecting optical digital cords, insert the
plugs straight in until they click into place.
The following illustration shows how to • Do not bend or tie optical digital cords.
connect a satellite tuner.
It is not necessary to connect all the cables. Tip
Connect audio and video cords according to All the digital audio jacks are compatible with
the jacks of your components. 32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.

Satellite tuner

A B C D

DIGITAL DVD IN VIDEO 2 IN MONITOR OUT COMPONENT VIDEO CENTER

OPTICAL ASSIGNABLE
VIDEO 1 ANTENNA Y
IN XM
ASSIGNABLE
VIDEO 2 + –
IN HDMI MONITOR PB/CB
/B–Y
SPEAKERS
AM
PR/CR
/R–Y
VIDEO IN VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT DVD VIDEO 2 MONITOR
IN IN OUT

L L
DVD
IN
COAXIAL
L L L L + – + –
L AUDIO
CENTER OUT

R R
R R R R R
IN OUT IN AUDIO IN AUDIO IN AUDIO OUT AUDIO IN SUB SURROUND FRONT A
FRONT SURROUND WOOFER SUB
SA-CD/CD MD/TAPE DVD VIDEO 2 VIDEO 1 SPEAKERS
MULTI CH IN WOOFER

A Audio cord (not supplied)

B Optical digital cord (not supplied)
C Video cord (not supplied)
D Component video cord (not supplied)

26US

Hooking up components with

analog video and audio jack

Getting Started
The following illustration shows how to
connect a component which has analog jacks
such as a VCR, etc.

VCR

DIGITAL DVD IN VIDEO 2 IN MONITOR OUT COMPONENT VIDEO CENTER

OPTICAL ASSIGNABLE
VIDEO 1 ANTENNA Y
IN XM
ASSIGNABLE
VIDEO 2 + –
IN HDMI MONITOR PB/CB
/B–Y
SPEAKERS
AM
PR/CR
/R–Y
VIDEO IN VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT DVD VIDEO 2 MONITOR
IN IN OUT

L L
DVD
IN
COAXIAL
L L L L + – + –
L AUDIO
CENTER OUT

R R
R R R R R
IN OUT IN AUDIO IN AUDIO IN AUDIO OUT AUDIO IN SUB SURROUND FRONT A
FRONT SURROUND WOOFER SUB
SA-CD/CD MD/TAPE DVD VIDEO 2 VIDEO 1 SPEAKERS
MULTI CH IN WOOFER

VIDEO 3 IN/PORTABLE AV IN

To the VIDEO 3 IN/PORTABLE AV IN jacks

(Front panel)

Camcorder/
video game
A
A Audio/video cord (not supplied)

27US

4: Connecting the antennas

Connect the supplied AM loop antenna and
FM wire antenna.

FM wire antenna (supplied)

AM loop antenna (supplied)

DIGITAL DVD IN VIDEO 2 IN MONITOR OUT COMPONENT VIDEO CENTER

OPTICAL ASSIGNABLE
VIDEO 1 ANTENNA Y
IN XM
ASSIGNABLE
VIDEO 2 + –
IN HDMI MONITOR PB/CB
/B–Y
SPEAKERS
AM
PR/CR
/R–Y
VIDEO IN VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT DVD VIDEO 2 MONITOR
IN IN OUT

L L
DVD
IN
COAXIAL
L L L L + – + –
L AUDIO
CENTER OUT

R R
R R R R R
IN OUT IN AUDIO IN AUDIO IN AUDIO OUT AUDIO IN SUB SURROUND FRONT A
FRONT SURROUND WOOFER SUB
SA-CD/CD MD/TAPE DVD VIDEO 2 VIDEO 1 SPEAKERS
MULTI CH IN WOOFER

* The shape of the connector varies depending on

the area code of this receiver.

Notes
• To prevent noise pickup, keep the AM loop antenna
away from the receiver and other components.
• Be sure to fully extend the FM wire antenna.
• After connecting the FM wire antenna, keep it as
horizontal as possible.

28US

Performing initial setup

5: Preparing the receiver operations

Getting Started
and the remote Before using the receiver for the first time,
initialize the receiver by performing the
Connecting the AC power cord following procedure. This procedure can also
be used to return settings you have made to
Connect the AC power cord to a wall outlet. their factory defaults.
AC power cord
Be sure to use the buttons on the receiver for
this operation.

1,2
?/1
MASTER VOLUME
MULTI CHANNEL DECODING
DISPLAY INPUT MODE

INPUT SELECTOR

SPEAKERS
(OFF/A/B/A+B)

AUTO CAL MIC

MEMORY/ TUNING
ENTER MODE TUNING 2CH A.F.D. MOVIE MUSIC MULTI CH IN MUTING
VIDEO 3 IN/PORTABLE AV IN

L PHONES

VIDEO L AUDIO R

R L

+ –

R
3
FRONT A R L
FRONT B
SPEAKERS
1 Press ?/1 to turn off the
receiver.

To the wall outlet 2 Hold down ?/1 for 5 seconds.

“PUSH” and “ENTER” appears on the
Note display alternately.
Install this system so that the power cord can be
unplugged from the wall socket immediately in the 3 Press MEMORY/ENTER.
event of trouble. After “CLEARING” appears on the
display for a while, “CLEARED”
appears.
The following items are reset to their
factory settings.
• All settings in the LEVEL, TONE,
SUR, TUNER, AUDIO, VIDEO and
SYSTEM menus.
• The sound field memorized for each
input and preset station.
• All sound field parameters.
• All preset stations.
• All index names for inputs and preset
stations.
• MASTER VOLUME is set to “VOL
MIN”.
• Input is set to “DVD”.

29US

Inserting batteries into the

remote
6: Selecting the speaker
Insert two R6 (size-AA) batteries in the
system
RM-AAP012 remote commander. You can select the front speakers you want to
Observe the correct polarity when installing drive.
batteries. Be sure to use the buttons on the receiver for
this operation.

?/1
MASTER VOLUME
MULTI CHANNEL DECODING
DISPLAY INPUT MODE

INPUT SELECTOR

SPEAKERS
(OFF/A/B/A+B)

AUTO CAL MIC

MEMORY/ TUNING
ENTER MODE TUNING 2CH A.F.D. MOVIE MUSIC MULTI CH IN MUTING
VIDEO 3 IN/PORTABLE AV IN
PHONES

VIDEO L AUDIO R

SPEAKERS
(OFF/A/B/A+B)
Notes
• Do not leave the remote in an extremely hot or Press SPEAKERS (OFF/A/B/A+B)
humid place. repeatedly to select the front
• Do not use a new battery with old ones. speaker system you want to drive.
• Do not mix alkaline batteries and other kinds of
batteries. To select Light up
• Do not expose the remote sensor to direct sunlight
or lighting apparatuses. Doing so may cause a The speakers connected to the SP A
SPEAKERS FRONT A terminals
malfunction.
• If you do not intend to use the remote for an The speakers connected to the SP B
extended period of time, remove the batteries to SPEAKERS FRONT B terminals
avoid possible damage from battery leakage and The speakers connected to both the SP A and
corrosion. SPEAKERS FRONT A and B SP B
terminals (parallel connection)
Tip
Under normal conditions, the batteries should last To turn off the speaker output, press
for about 3 months. When the remote no longer SPEAKERS (OFF/A/B/A+B) repeatedly until
operates the receiver, replace all the batteries with the “SP A” and “SP B” indicators on the
new ones. display do not light up.

30US

Tips
7: Calibrating the • You can also fix the optimizer microphone to a
tripod (not supplied) and place the tripod at your

Getting Started
appropriate settings listening position.
• Be sure to remove any obstacles in the path
automatically between the optimizer microphone and the
speakers.
(AUTO CALIBRATION) • When you face the speaker towards the optimizer
microphone, you will get a more accurate
This receiver is equipped with D.C.A.C. measurement.
(Digital Cinema Auto Calibration)
Technology which allows you to perform
Performing Auto Calibration
automatic calibration as follows:
• Check the connection between each speaker
and the receiver. ?/1
TV ?/1 AV ?/1
• Adjust the speaker level. RM SET UP P
?/1
• Measure the distance of each speaker to your switch
SYSTEM STANDBY SLEEP
listening position. VIDEO1 VIDEO2 VIDEO3 DVD

You can also adjust the speaker levels and Input

balance manually. For details, see buttons MD/TAPE SA-CD/CD TUNER AUX

“8: Adjusting the speaker levels and balance MULTI CH

(TEST TONE)” (page 34).

2CH A.F.D. MOVIE MUSIC

1 2 3
Before you perform Auto CATEGORY
DUAL CATEGORY
MONO MODE

Calibration AUDIO
4
ANGLE
TUNING
5 6
JUMP/ PRESET/
TIME CH/D.SKIP

7 8 9
MEMORY SUBTITLE ENTER
. >
?/1
MASTER VOLUME 0/10 >10/11 12
MULTI CHANNEL DECODING
DISPLAY INPUT MODE
D.TUNING DISC ALT

SPEAKERS
INPUT SELECTOR
m M -
(OFF/A/B/A+B)

ANT CLEAR SEARCH MODE

AUTO CAL MIC
MEMORY/ TUNING
ENTER MODE TUNING 2CH A.F.D. MOVIE MUSIC MULTI CH IN MUTING
VIDEO 3 IN/PORTABLE AV IN
PHONES

VIDEO L AUDIO R
H X x

TOP MENU/ MUTING

GUIDE AV MENU
MUTING
1 F MASTER
VOL
Control G g
button MASTER
1 Connect the supplied ECM-AC2 f
O
VOL +/–
optimizer microphone to the DISPLAY RETURN/EXIT

AUTO CAL MIC jack. TV VOL TV CH

TV/
VIDEO
AMP
MENU

2 Place the optimizer WIDE

AUTO
CAL
AUTO
microphone at your listening CAL

position.
Press AUTO CAL.
3 Place the speakers so that the
The following appears on the display.
speakers are facing the A.CAL [5] t A.CAL [4] t A.CAL [3] t
optimizer microphone. A.CAL [2] t A.CAL [1]

continued
31US

The table below shows the display when

measurement starts. Error and warning codes
Measurement for Display
Error codes
Environment noise level NOISE.CHK
When an error is detected during Auto
Speaker connection MEASURE and SP Calibration, an error code will appear on the
DET. appears
alternately*
display cyclically after each measurement
process as follows:
Speaker level MEASURE and Error code t blank display t (error code t
GAIN appears
alternately* blank display)a) t PUSH t blank display
t ENTER
Speaker distance MEASURE and a) Appears
DISTANCE appears when there are more than one error code.
alternately*

* The corresponding speaker indicator lights up in To rectify the error

the display during measurement. 1 Record down the error code.
2 Press the control button.
When measurement ends, “COMPLETE” 3 Press ?/1 to turn off the receiver.
appears on the display and the settings are 4 Rectify the error.
registered. For details, see “Error code and remedies”
Notes below.
• Auto Calibration cannot detect the sub woofer. 5 Turn on the receiver and perform Auto
Therefore, all sub woofer settings will be Calibration again (page 31).
maintained.
• You cannot select Auto Calibration when Error code and remedies
headphone is connected.
• The measurement process will take a few minutes Error Explanation Remedies
to complete. code

Tips ERROR 10 The environment Make sure the

• When Auto Calibration starts: is too noisy. environment is
quiet during Auto
– Stand some distance from the speakers and the
Calibration.
listening position to avoid measurement failure.
This is because test signals are output from the ERROR 11 The speakers are Place your speakers
speakers during measurement. placed too near further away from
the optimizer the optimizer
– Avoid making noise to get a more accurate
microphone. microphone.
measurement.
• The Auto Calibration function will be canceled ERROR 20 Front speakers Check the front
when you do the following during the are not detected speaker
measurement process: or only one front connection.
– Press ?/1, input buttons or MUTING. speaker is
detected.
– Change the volume level.
– Press AUTO CAL again. ERROR 21 Only one Check the surround
surround speaker speaker
is detected. connection.

32US

Warning codes Warning Explanation Solution

During Auto Calibration, the warning code code
provides information on the measurement WARN. 64 The surround right Reposition your

Getting Started
result. The warning code will appear on the speaker level is out surround right
display cyclically as follows: of range. speaker.f)
Warning code t blank display t (warning WARN. 70 The front speaker Reposition your
code t blank display)b) t PUSH t blank distance is out of front speakers.c)
range.
display t ENTER
b) WARN. 72 The center speaker Reposition your
Appears when there are more than one warning
distance is out of center speaker.d)
code.
range.

You can choose to ignore the warning code as WARN. 73 The surround left Reposition your
speaker distance is surround left
the Auto Calibration function will out of range. speaker.e)
automatically adjust the settings. You can also
WARN. 74 The surround right Reposition your
change the settings manually. speaker distance is surround right
out of range. speaker.f)
To change the settings c)
For details, refer “Front speaker distance”
manually (page 46).
1 Record down the warning code. d) For details, refer “Center speaker distance”
2 Press the control button. (page 46).
3 Press ?/1 to turn off the receiver. e)
For details, refer “Surround left speaker distance”
4 Follow the solution provided in the (page 46).
f)
“Warning code and solution” below. For details, refer “Surround right speaker
5 Turn on the receiver and perform Auto distance” (page 46).
Calibration again (page 31).

Warning code and solution

Warning Explanation Solution
code
WARN. 40 The environment Make sure the
is noisy. environment is
quiet during Auto
Calibration.
WARN. 50 The center speaker Be sure to connect
is not connected. the center speaker.
WARN. 51 The surround Be sure to connect
speakers are not the surround
connected. speakers.
WARN. 60 The front speaker Reposition your
balance is out of front speakers.c)
range.
WARN. 62 The center speaker Reposition your
level is out of center speaker.d)
range.
WARN. 63 The surround left Reposition your
speaker level is out surround left
of range. speaker.e)

33US

6 Adjust the speaker levels and

8: Adjusting the speaker balance using the LEVEL menu
so that the level of the test tone
levels and balance sounds the same from each
(TEST TONE) speaker.
For details, see “Adjusting the level
You can adjust the speaker levels and balance (LEVEL menu)” (page 42).
while listening to the test tone from your
Tips
listening position.
• To adjust the level of all speakers at the same
Tip time, press MASTER VOL +/–. You can also
The receiver employs a test tone with a frequency use MASTER VOLUME on the receiver.
centered at 800 Hz. • The adjusted value are shown on the display
during adjustment.
H

TOP MENU/
X x

MUTING
7 Repeat steps 1 to 5 to select
GUIDE AV MENU
“T. TONE N”.
F MASTER
VOL The test tone turns off.
2-5 G g
MASTER Note
f VOL +/–
O The test tone does not work when MULTI CH IN is
DISPLAY RETURN/EXIT selected.
TV/ AMP

1
TV VOL TV CH VIDEO MENU

AUTO
WIDE CAL

1 Press AMP MENU.

“1-LEVEL” appears on the display.

2 Press the control button or

control button b to enter the
menu.

3 Press control button V/v

repeatedly to select “T. TONE”.

4 Press the control button or

control button b to enter the
parameter.

5 Press control button V/v

repeatedly to select “T. TONE
Y”.
The test tone is output from each speaker
in sequence as follows:
Front left t Center t Front right t
Surround right t Surround left t
Sub woofer

34US

HT-7000DH
2-662-265-11 (1)
C:\Documents and masterpage: Right
Settings\pc13\Desktop\J9052007_2662265111HT7000DH_US\2662265111\US04PLA_HT-
7000DH-U.fm
US01COV_HT-7000DH-U.book Page 35 Wednesday, January 25, 2006 3:30 PM

Selected input Components that can

[Display] be played back
Playback
VIDEO1 or VCR, etc., connected to the
VIDEO2 VIDEO 1 or VIDEO 2 jack
Selecting a component [VIDEO 1 or
VIDEO 2]
SYSTEM STANDBY SLEEP

Playback
VIDEO1 VIDEO2 VIDEO3 DVD
VIDEO3 Camcorder, video game,
[VIDEO 3] etc., connected to the
1 MD/TAPE SA-CD/CD TUNER AUX
VIDEO 3 IN/PORTABLE
AV IN jack
MULTI CH
DVD DVD player, etc.,
MULTI CH [DVD] connected to DVD jack
2CH A.F.D. MOVIE MUSIC

1 2 3
MD/TAPE MD deck, tape deck, etc.,
CATEGORY
DUAL CATEGORY
MONO MODE
[MD/TAPE] connected to the MD/
4 5 6
TAPE jack
AUDIO ANGLE JUMP/ PRESET/
TIME CH/D.SKIP
TUNING
SA-CD/CD Super Audio CD/CD
7 8 9
[SA-CD/CD] player, etc., connected to
MEMORY SUBTITLE ENTER
. > the SA-CD/CD jack
0/10 >10/11 12
D.TUNING DISC ALT
TUNER Built-in radio tuner
m M -
ANT CLEAR SEARCH MODE
[FM or AM band]
MULTI CH Component connected to
H X x
[MULTI IN*] the MULTI CH IN jack
TOP MENU/ MUTING
GUIDE AV MENU
MUTING *When headphone is connected, “HP MULTI”
F MASTER
VOL appears on the display.
G g
Note
f
O
3 The surround effect does not work when
DISPLAY RETURN/EXIT
MULTI CH IN is selected.

2 Turn on the component and

1 Press the input button to select start playback.
a component.
You can also use INPUT SELECTOR on 3 Press MASTER VOL +/– to
the receiver. To select a component adjust the volume.
connected to the MULTI CH IN jack, You can also use MASTER VOLUME on
press MULTI CH. the receiver.
You can also use MULTI CH IN on the
receiver. To mute the sound
The selected input appears on the display.
Press MUTING.
The muting function will be canceled when
you do the following.
• Press MUTING again.
• Increase the volume.
• Turn off the receiver.

continued
35US

HT-7000DH
2-662-265-11 (1)
C:\Documents and masterpage: Left
Settings\pc13\Desktop\J9052007_2662265111HT7000DH_US\2662265111\US04PLA_HT-
7000DH-U.fm
US01COV_HT-7000DH-U.book Page 36 Wednesday, January 25, 2006 3:30 PM

To avoid damaging your

speakers
Before you turn off the receiver, be sure to turn
down the volume level.

To listen to the sub woofer

Be sure to use the buttons on the rear panel of
the sub woofer for this operation.
1 Press POWER.
The POWER indicator lights up.
2 Turn LEVEL to adjust the volume.
Set the volume level to suit your preference
according to the selected input as slight
adjustments may enhance the sound.
Note
Do not set the volume of the sub woofer to
maximum as extraneous noise may be heard.

36US

HT-7000DH
2-662-265-11 (1)
C:\Documents and masterpage: R-2
Settings\pc13\Desktop\J9052007_2662265111HT7000DH_US\2662265111\US04PLA_HT-
7000DH-U.fm
US01COV_HT-7000DH-U.book Page 37 Wednesday, January 25, 2006 3:30 PM

Listening/Watching a component
Listening to a Super Audio CD/CD

Playback
2
TV ?/1 AV ?/1 ?/1
RM SET UP P

SYSTEM STANDBY SLEEP

VIDEO1 VIDEO2 VIDEO3 DVD

MD/TAPE SA-CD/CD TUNER AUX

2CH A.F.D. MOVIE

MULTI CH

MUSIC
3 ?/1
MULTI CHANNEL DECODING
MASTER VOLUME

1 2 3
DUAL CATEGORY DISPLAY INPUT MODE
CATEGORY MONO MODE

5
4 5 6
AUDIO ANGLE JUMP/ PRESET/ INPUT SELECTOR
TUNING TIME CH/D.SKIP

7 8 9 SPEAKERS
(OFF/A/B/A+B)
MEMORY SUBTITLE ENTER
. >
0/10 >10/11 12
D.TUNING DISC ALT

m M - AUTO CAL MIC

ANT CLEAR SEARCH MODE MEMORY/ TUNING
ENTER MODE TUNING 2CH A.F.D. MOVIE MUSIC MULTI CH IN MUTING

3
VIDEO 3 IN/PORTABLE AV IN
H X x PHONES

TOP MENU/ MUTING

GUIDE AV MENU
VIDEO L AUDIO R
F MASTER
VOL

5
G g

f
O

DISPLAY RETURN/EXIT
TV/ AMP
TV VOL TV CH VIDEO MENU

AUTO
WIDE CAL

Notes
• The operation is described for a
1 Turn on the Super Audio CD player/CD
Sony Super Audio CD player.
player, then place the disc on the tray.
• Refer to the operating
instructions supplied with the
2 Turn on the receiver.
Super Audio CD player or CD
player.
3 Press SA-CD/CD.
You can also use INPUT SELECTOR on the receiver to
Tips select SA-CD/CD.
• You can select the sound field to
suit the music. Refer to page 50
for details.
4 Playback the disc.
Recommended sound fields:
Classical: HALL
5 Adjust to a suitable volume.
Jazz: JAZZ
Live concert: CONCERT
6 After you have finished listening to the
Super Audio CD/CD, eject the disc and turn
• You can listen to the sound that
was recorded in the 2 channel off the receiver and Super Audio CD player/
format from all speakers (multi CD player.
channel). Refer to page 48 for
details.

37US

HT-7000DH
2-662-265-11 (1)
C:\Documents and masterpage: L-2
Settings\pc13\Desktop\J9052007_2662265111HT7000DH_US\2662265111\US04PLA_HT-
7000DH-U.fm
US01COV_HT-7000DH-U.book Page 38 Wednesday, January 25, 2006 3:30 PM

Watching a DVD
MULTI CHANNEL DECODING lamp
2
TV ?/1 AV ?/1 ?/1
RM SET UP P

SYSTEM STANDBY SLEEP

VIDEO1 VIDEO2 VIDEO3 DVD

MD/TAPE SA-CD/CD TUNER AUX

MULTI CH
3
?/1
2CH A.F.D. MOVIE MUSIC MASTER VOLUME

1 2 3
MULTI CHANNEL DECODING
DUAL CATEGORY DISPLAY INPUT MODE
CATEGORY MONO MODE

7
4 5 6
AUDIO ANGLE JUMP/ PRESET/ INPUT SELECTOR
TUNING TIME CH/D.SKIP

7 8 9 SPEAKERS
(OFF/A/B/A+B)
MEMORY SUBTITLE ENTER
. >
0/10 >10/11 12
D.TUNING DISC ALT

m M - AUTO CAL MIC

ANT CLEAR SEARCH MODE MEMORY/ TUNING
ENTER MODE TUNING 2CH A.F.D. MOVIE MUSIC MULTI CH IN MUTING

3
VIDEO 3 IN/PORTABLE AV IN
H X x PHONES

TOP MENU/ MUTING

GUIDE AV MENU
VIDEO L AUDIO R
F MASTER
VOL

DISPLAY

TV VOL
G

TV CH
g

RETURN/EXIT
TV/
VIDEO
AMP
MENU
7
AUTO
WIDE CAL

Notes
• Refer to the operating
1 Turn on the TV and DVD player.
instructions supplied with the
TV and DVD player.
2 Turn on the receiver.
• Check the following if you
cannot listen to multi channel
3 Press DVD.
sound. You can also use INPUT SELECTOR on this receiver to
– Be sure the sound source select DVD.
corresponds to the multi
channel format (the MULTI 4 Switch the input of the TV so that an image
CHANNEL DECODING of the DVD is displayed.
lamp on the front panel lights
up during playback). 5 Set up the DVD player.
– Be sure this receiver is Refer to the operating instructions supplied with the DVD
connected to the DVD player player.
via a digital connection.
– Be sure the digital audio
output of the DVD player is
6 Playback the disc.
set up properly. 7 Adjust to a suitable volume.
Tips
• Select the sound format of the 8 After you have finished watching the DVD,
disc to be played, if necessary. eject the disc and turn off the receiver, TV
• You can select the sound field to and DVD player.
suit the movie/music. Refer to
page 50 for details.
Recommended sound fields:
Movie: C.ST.EX
Music: CONCERT

38US

HT-7000DH
2-662-265-11 (1)
C:\Documents and masterpage: Right
Settings\pc13\Desktop\J9052007_2662265111HT7000DH_US\2662265111\US05AMP_HT-
7000DH-U.fm
US01COV_HT-7000DH-U.book Page 39 Wednesday, January 25, 2006 3:30 PM

To return to the previous

display
Amplifier Operations Press control button B.

Navigating through To exit the menu

menus Press AMP MENU.
Note
By using the amplifier menus, you can make Some parameters and settings may appear dimmed
various adjustments to customize the receiver. on the display. This means that they are either
unavailable or fixed and unchangeable.

Amplifier Operations
H X x

TOP MENU/ MUTING

GUIDE AV MENU

F MASTER
VOL

2-6 G

f
g

DISPLAY RETURN/EXIT
TV/ AMP
TV VOL TV CH VIDEO MENU

WIDE
AUTO
CAL
1

1 Press AMP MENU.

“1-LEVEL” appears on the display.

2 Press control button V/v

repeatedly to select the menu
you want.

3 Press the control button or

control button b to enter the
menu.

4 Press control button V/v

repeatedly to select the
parameter you want to adjust.

5 Press the control button or

control button b to enter the
parameter.
6 Press control button V/v
repeatedly to select the setting
you want.
The setting is entered automatically.

39US

HT-7000DH
2-662-265-11 (1)
C:\Documents and masterpage: Left
Settings\pc13\Desktop\J9052007_2662265111HT7000DH_US\2662265111\US05AMP_HT-
7000DH-U.fm
US01COV_HT-7000DH-U.book Page 40 Wednesday, January 25, 2006 3:30 PM

Overview of the menus

The following options are available in each
menu. For details on navigating through
menus, see page 39.

Menu Parameters Settings Initial

[Display] [Display] setting
LEVEL (42) Test tonea) [T. TONE] T. TONE Y, T. TONE N T. TONE N
[1-LEVEL]
Front speaker balancea) BAL. L +1 to BAL. L +8, BALANCE, BALANCE
[FRT BAL] BAL. R +1 to BAL. R +8
Center speaker level CNT –10 dB to CNT +10 dB CNT 0 dB
[CNT LVL] (1 dB step)
Surround left speaker level SUR L –10 dB to SUR L +10 dB SUR L 0 dB
[SL LVL] (1 dB step)
Surround right speaker level SUR R –10 dB to SUR R +10 dB SUR R 0 dB
[SR LVL] (1 dB step)
Sub woofer level SW –10 dB to SW +10 dB SW 0 dB
[SW LVL] (1 dB step)
Dynamic range compressora) COMP. OFF, COMP. STD, COMP. OFF
[D. RANGE] COMP. MAX
TONE (43) Front speaker bass level BASS –6 dB to BASS +6 dB BASS 0 dB
[2-TONE] [BASS LVL] (1 dB step)
Front speaker treble level TRE –6 dB to TRE +6 dB TRE 0 dB
[TRE LVL] (1 dB step)
SUR (43) Sound field selectiona) 2CH ST., A.F.D. AUTO, DOLBY PL, A.F.D. AUTO
[3-SUR] [S.F. SELCT] PLII MV, PLII MS, PLII GM, PLIIX for:
MV, PLIIX MS, PLIIX GM, NEO6 TUNER,
CIN, NEO6 MUS, MULTI ST., SA-CD/CD,
C.ST.EX A, C.ST.EX B, C.ST.EX C, MD/TAPE,
HALL, JAZZ, CONCERT DVD,
VIDEO 1, 2, 3
Effect levela) [EFFECT] EFCT. MIN, EFCT. STD, EFCT. STD
EFCT. MAX
TUNER (44) FM station receiving modea) FM AUTO, FM MONO FM AUTO
[4-TUNER] [FM MODE]
Naming preset stationsa)
[NAME IN]

40US

Menu Parameters Settings Initial

[Display] [Display] setting
AUDIO (44) Digital audio input decoding DEC. AUTO, DEC. PCM DEC. AUTO
[5-AUDIO] prioritya) [DEC. PRI.] for:
VIDEO 1, 2;
DEC. PCM for:
DVD
Digital broadcast language DUAL M/S, DUAL M, DUAL S, DUAL M
selectiona) [DUAL] DUAL M+S
A/V Synca) [A.V. SYNC.] A.V.SYNC. Y, A.V.SYNC. N A.V.SYNC. N
Naming inputsa) [NAME IN]

Amplifier Operations
VIDEO (45) Component video assigna) DVD–VD1, DVD–VD3, DVD–DVD
[6-VIDEO] [COMP. V. A.] DVD–DVD, DVD–MD, for:
DVD–CD, VD2–VD1, DVD;
VD2–VD2, VD2–VD3, VD2–VD2 for:
VD2–MD, VD2–CD VIDEO 2
HDMI assigna) DVD–VD1, DVD–VD3, DVD–DVD
[HDMI A.] DVD–DVD, DVD–MD, for:
DVD–CD, VD2–VD1, DVD;
VD2–VD2, VD2–VD3, VD2–VD2 for:
VD2–MD, VD2–CD VIDEO 2
Naming inputsa) [NAME IN]
SYSTEM (46) Front speaker distancea) DIST. 3 ft. to DIST. 23 ft. DIST. 3.0 m
[7-SYSTEM] [FRT DIST.] (1 ft. step)
Center speaker distancea) DIST. xx ft. DIST. 3.0 m
[CNT DIST.] between front speaker distance and
5 ft. (1 ft. step)
Surround left speaker distancea) DIST. xx ft. DIST. 3.0 m
[SL DIST.] between front speaker distance and
15 ft. (1 ft. step)
Surround right speaker DIST. xx ft. DIST. 3.0 m
distancea) between front speaker distance and
[SR DIST.] 15 ft. (1 ft. step)
Surround speaker positiona) SIDE/LO, SIDE/HI, BEHD/LO, SIDE/LO
[SUR POS.] BEHD/HI
Brightness of the displaya) 0% dim, 40% dim, 70% dim 0% dim
[DIMMER]
A. CAL (48) Auto Calibrationa) A.CAL YES, A.CAL NO A.CAL NO
[8-A. CAL] [AUTO CAL.]
a) For details, refer to the page in the parentheses.

41US

x D. RANGE (Dynamic range

compressor)
Adjusting the level Lets you compress the dynamic range of the
(LEVEL menu) sound track. This may be useful when you
want to watch movies at low volumes late at
You can use the LEVEL menu to adjust the night. Dynamic range compression is possible
balance and level of each speaker. These with Dolby Digital sources only.
settings are applied to all sound fields. • COMP. OFF
Select “1-LEVEL” in the amplifier menus. For The dynamic range is not compressed.
details on adjusting the parameters, see • COMP. STD
“Navigating through menus” (page 39) and The dynamic range is compressed as
“Overview of the menus” (page 40). intended by the recording engineer.
• COMP. MAX
The dynamic range is compressed
LEVEL menu parameters dramatically.
x T. TONE (Test tone) Tip
Lets you adjust the speaker levels and balance Dynamic range compressor lets you compress the
while listening to the test tone from your dynamic range of the soundtrack based on the
listening position. For details, see “8: dynamic range information included in the Dolby
Adjusting the speaker levels and balance Digital signal.
(TEST TONE)” (page 34). “COMP. STD” is the standard setting, but it only
enacts light compression. Therefore, we recommend
x FRT BAL (Front speaker using the “COMP. MAX” setting. This greatly
balance) compresses the dynamic range and lets you view
Lets you adjust the balance between front left movies late at night at low volumes. Unlike analog
limiters, the levels are predetermined and provide a
and right speakers.
very natural compression.

x CNT LVL (Center speaker level)

x SL LVL (Surround left speaker

level)
x SR LVL (Surround right speaker
level)
x SW LVL (Sub woofer level)

42US

Adjusting the tone Settings for the surround

(TONE menu) sound
You can use the TONE menu to adjust the (SUR menu)
tonal quality (bass/treble level) of the front
speakers. These settings are applied to all You can use the SUR menu to select the sound
sound fields. field you want for your listening pleasure.
Select “2-TONE” in the amplifier menus. For Select “3-SUR” in the amplifier menus. For
details on adjusting the parameters, see details on adjusting the parameters, see

Amplifier Operations
“Navigating through menus” (page 39) and “Navigating through menus” (page 39) and
“Overview of the menus” (page 40). “Overview of the menus” (page 40).

TONE menu parameters SUR menu parameters

x BASS LVL (Front speaker bass x S.F. SELCT (Sound field

level) selection)
Lets you select the sound field you want. For
x TRE LVL (Front speaker treble details, see “Enjoying Surround Sound” (page
level) 48).
Note
The receiver lets you apply the last selected sound
field to an input whenever it is selected (Sound Field
Link). For example, if you select HALL for the
SA-CD/CD input, then change to a different input
and then return to SA-CD/CD, HALL will
automatically be applied again.

x EFFECT (Effect level)

Lets you adjust the “presence” of the surround
effect for sound fields selected with the
MOVIE or MUSIC buttons and for “HP
THEA” sound field.
• EFCT. MIN
The surround effect is minimum.
• EFCT. STD
The surround effect is standard.
• EFCT. MAX
The surround effect is maximum.

43US

Settings for the tuner Settings for the audio

(TUNER menu) (AUDIO menu)
You can use the TUNER menu to set the FM You can use the AUDIO menu to make settings
station receiving mode and to name preset for the audio to suit your preference.
stations. Select “5-AUDIO” in the amplifier menus. For
Select “4-TUNER” in the amplifier menus. details on adjusting the parameters, see
For details on adjusting the parameters, see “Navigating through menus” (page 39) and
“Navigating through menus” (page 39) and “Overview of the menus” (page 40).
“Overview of the menus” (page 40).
AUDIO menu parameters
TUNER menu parameters
x DEC. PRI. (Digital audio input
x FM MODE (FM station receiving decoding priority)
mode) Lets you specify the input mode for the digital
• FM AUTO signal input to the DIGITAL IN jacks.
This receiver will decode the signal as stereo • DEC. AUTO
signal when the radio station is broadcast in Automatically switches the input mode
stereo. between DTS, Dolby Digital, or PCM.
• FM MONO • DEC. PCM
This receiver will decode the signal as mono PCM signals are given priority (to prevent
signal regardless of the broadcast signal. interruption when playback starts).
However, when other signals are input, there
x NAME IN (Naming preset may be no sound depending on the format.
stations) In this case, set to “DEC. AUTO”.
Lets you set the name of preset stations. For
details, see “Naming preset stations” (page Note
56). When set to “DEC. AUTO” and the sound from the
digital audio jacks (for CD, etc.) is interrupted when
playback starts, set to “DEC. PCM”.

44US

x DUAL (Digital broadcast

language selection)
Lets you select the language you want to listen
Settings for the video
to during digital broadcast. This feature only (VIDEO menu)
functions for Dolby Digital sources.
• DUAL M/S (Main/Sub) You can use the VIDEO menu to reassign the
Sound of the main language will be output component video input to another input and to
through the front left speaker and sound of name inputs.
the sub language will be output through the Select “6-VIDEO” in the amplifier menus. For
front right speaker simultaneously. details on adjusting the parameters, see
• DUAL M (Main) “Navigating through menus” (page 39) and

Amplifier Operations
Sound of the main language will be output. “Overview of the menus” (page 40).
• DUAL S (Sub)
Sound of the sub language will be output.
• DUAL M+S (Main + Sub)
VIDEO menu parameters
Mixed sound of both the main and sub x COMP. V. A. (Component video
languages will be output. assign)
Lets you reassign the component video input
x A.V. SYNC. (A/V Sync) to another input. For details, see “Watching
• A.V.SYNC. Y (Yes) (Delay time: 68 ms) component images from other inputs” (page
The audio output is delayed so that the time 64).
gap between the audio output and visual
display is minimized. x HDMI A. (HDMI assign)
• A.V.SYNC. N (No) (Delay time: 0 ms) Lets you reassign the HDMI input to another
The audio output is not delayed. input. For details, see “Watching HDMI
Notes images from other inputs” (page 65).
• This parameter is useful when you use a large LCD
or plasma monitor or a projector. x NAME IN (Naming inputs)
• This parameter is valid only when you use a sound Lets you set the name of inputs. For details, see
field selected with the 2CH or A.F.D. buttons. “Naming inputs” (page 66).
• This parameter is not valid when MULTI CH IN
function is selected.

x NAME IN (Naming inputs)

Lets you set the name of inputs. For details, see
“Naming inputs” (page 66).

45US

x SR DIST. (Surround right

speaker distance)
Settings for the system Lets you set the distance from your listening
(SYSTEM menu) position to the surround right speaker.
Surround right speaker distance should be set
You can use the SYSTEM menu to set the size from a distance equal to the front speaker
and distance of the speakers connected to this distance (A) to a distance 15 feet closer to
system. your listening position (D).
Select “7-SYSTEM” in the amplifier menus.
Tip
For details on adjusting the parameters, see The receiver lets you to input the speaker position in
“Navigating through menus” (page 39) and terms of distance. However, it is not possible to set
“Overview of the menus” (page 40). the center speaker further than the front speakers.
Also, the center speaker cannot be set more than 5
feet closer from the front speakers.
SYSTEM menu parameters
Likewise, the surround speakers can not be set
further away from the listening position than the
x FRT DIST. (Front speaker
front speakers. And they can be no more than 15 feet
distance)
closer. This is because incorrect speaker placement
Lets you set the distance from your listening
is not conducive to the enjoyment of surround
position to the front speaker (A). If both front sound.
speakers are not placed an equal distance from Please note that, setting the speaker distance closer
your listening position, set the distance as the than the actual location of the speakers will cause a
average distance between the front speakers. delay in the output of the sound from that speaker. In
other words, the speaker will sound like it is further
B away.
For example, setting the center speaker distance 3-6
A A
30˚ 30˚ feet closer than the actual speaker position will
100˚-120˚ 100˚-120˚ create a fairly realistic sensation of being “inside”
the screen. If you cannot obtain a satisfactory
C D surround effect because the surround speakers are
too close, setting the surround speaker distance
closer (shorter) than the actual distance will create a
larger sound stage.
Adjusting these parameter while listening to the
sound often results in much better surround sound.
x CNT DIST. (Center speaker Give it a try!
distance)
Lets you set the distance from your listening
position to the center speaker. Center speaker
distance should be set from a distance equal to
the front speaker distance (A) to a distance 5
feet closer to your listening position (B).

x SL DIST. (Surround left speaker

distance)
Lets you set the distance from your listening
position to the surround left speaker. Surround
left speaker distance should be set from a
distance equal to the front speaker distance
(A) to a distance15 feet closer to your
listening position (C).

46US

x SUR POS. Tip

(Surround speaker position) Surround speaker position is designed specifically
Lets you specify the location of your surround for implementation of the Cinema Studio EX modes.
speakers for proper implementation of the For other sound fields, speaker position is not so
surround effects in the Cinema Studio EX critical.
modes (page 51). Those sound fields were designed under the premise
that the surround speakers would be located behind
the listening position, but presentation remains fairly
consistent even with the surround speakers
positioned at a rather wide angle. However, if the
speakers are pointing toward the listener from the
immediate left and right of the listening position, the

Amplifier Operations
surround effects become unclear unless set to
“SIDE/LO” or “SIDE/HI”.
Nevertheless, each listening environment has many
variables, such as wall reflections, and you may
obtain better results using “BEHD/HI” if your
speakers are located high above the listening
position, even if they are located to the immediate
left and right.
Therefore, although it may result in a setting
contrary to the above explanation, we recommend
that you playback multi channel surround encoded
software and select the setting that provides a good
sense of spaciousness and that best succeeds in
forming a cohesive space between the surround
sound from the surround speakers and the sound of
the front speakers. If you are not sure which sounds
best, select “BEHD/LO” or “BEHD/HI” and then
use the speaker distance parameter and speaker level
adjustments to obtain proper balance.

x DIMMER (Brightness of the

display)
Lets you adjust the brightness in 3 steps.
• SIDE/LO
Select if the location of your surround
speakers corresponds to sections A and C.
• SIDE/HI
Select if the location of your surround
speakers corresponds to sections A and D.
• BEHD/LO
Select if the location of your surround
speakers corresponds to sections B and C.
• BEHD/HI
Select if the location of your surround
speakers corresponds to sections B and D.

47US

Calibrating the Enjoying Surround Sound

appropriate settings
automatically Enjoying Dolby Digital
(A. CAL menu) and DTS Surround sound
(AUTO FORMAT DIRECT)
For details, see “7: Calibrating the appropriate
settings automatically (AUTO The Auto Format Direct (A.F.D.) mode allows
CALIBRATION)” (page 31). you to listen to higher fidelity sound and select
the decoding mode for listening to a 2 channel
stereo sound as multi channel sound.

2CH A.F.D. MOVIE MUSIC

1 2 3
A.F.D. CATEGORY
DUAL CATEGORY
MONO MODE

4 5 6

Press A.F.D. repeatedly to select

the sound field you want.
For details, see “Types of A.F.D. mode” (page
49).

48US

Types of A.F.D. mode

Decoding A.F.D. mode Multi channel Effect
mode [Display] audio after
decoding
(Detecting A.F.D. AUTO (Detecting Presents the sound as it was recorded/
automatically) [A.F.D. AUTO] automatically) encoded without adding any surround
effects. However, this receiver will
generate a low frequency signal for output
to the sub woofer when there is no LFE
signals.
Dolby Pro Logic PRO LOGIC 4 channel Performs Dolby Pro Logic decoding. The
[DOLBY PL] source recorded in 2 channel format is
decoded into 4.1 channels.
Dolby Pro Logic PRO LOGIC II MOVIE 5 channel Performs Dolby Pro Logic II Movie mode
II [PLII MV] decoding. This setting is ideal for movies

Enjoying Surround Sound

encoded in Dolby Surround. In addition,
this mode can reproduce sound in 5.1
channel for watching videos of overdubbed
or old movies.
PRO LOGIC II MUSIC 5 channel Performs Dolby Pro Logic II Music mode
[PLII MS] decoding. This setting is ideal for normal
stereo sources such as CDs.
(Multi Stereo) MULTI STEREO (Multi Stereo) Outputs 2 channel left/right signals from
[MULTI ST.] all speakers.

Notes
• Dolby Pro Logic and Dolby Pro Logic II decoding do not function for DTS format signals.
• This function does not work when MULTI CH IN is selected.

49US

Selecting a pre-
programmed sound field
You can take advantage of surround sound
simply by selecting one of the receiver’s pre-
programmed sound fields. They bring the
exciting and powerful sound of movie theaters
and concert halls into your home.
MULTI CH

2CH A.F.D. MOVIE MUSIC

2CH 1 2 3
MUSIC
DUAL CATEGORY
CATEGORY MONO MODE

4 5 6
A.F.D. AUDIO ANGLE JUMP/ PRESET/ MOVIE
TUNING TIME CH/D.SKIP

7 8 9

Press MOVIE repeatedly to select a

sound field for movies or press
MUSIC repeatedly to select a sound
field for music.
For details, see “Types of sound field
available” (page 51).

50US

Types of sound field available

Sound field Sound field Effect
for [Display]
Movie CINEMA STUDIO EX A Reproduces the sound characteristics of the Sony Pictures
DCS [C.ST.EX A] Entertainment “Cary Grant Theater” cinema production
studio. This is a standard mode, great for watching almost any
type of movie.
CINEMA STUDIO EX B Reproduces the sound characteristics of the Sony Pictures
DCS [C.ST.EX B] Entertainment “Kim Novak Theater” cinema production
studio. This mode is ideal for watching science-fiction or
action movies with lots of sound effects.
CINEMA STUDIO EX C Reproduces the sound characteristics of the Sony Pictures
DCS [C.ST.EX C] Entertainment scoring stage. This mode is ideal for watching
musicals or films where orchestra music is featured in the
soundtrack.

Enjoying Surround Sound

Music HALL [HALL] Reproduces the acoustics of a classical concert hall.
JAZZ CLUB [JAZZ] Reproduces the acoustics of a jazz club.
LIVE CONCERT Reproduces the acoustics of a 300-seat live house.
[CONCERT]
Headphone HEADPHONE 2CH This mode is selected automatically if you use headphone
[HP 2CH] when 2 channel mode (page 52)/A.F.D. mode (page 49) is
selected. Standard 2 channel stereo sources completely bypass
the sound field processing and multi channel surround formats
are downmixed to 2 channels.
HEADPHONE MULTI This mode is selected automatically if you use headphone
[HP MULTI] when MULTI CH IN is selected. Outputs the front analog
signals from the MULTI CH IN jacks.
HEADPHONE THEATER This mode is selected automatically if you use headphone
DCS [HP THEA] when sound field for movie/music is selected. It allows you to
experience a theater-like environment while listening through
a pair of headphones.

About DCS (Digital Cinema

Sound)
Sound fields with DCS mark use DCS
technology.
DCS is a unique sound reproduction
technology for home theater developed by
Sony, in cooperation with Sony Pictures
Entertainment, for enjoying the exciting and
powerful sound of movie theaters at home.
With this “Digital Cinema Sound” developed
by integrating a DSP (Digital signal processor)
and measured data, the ideal sound field
intended by film makers can be experienced at
home.

51US

About CINEMA STUDIO EX

modes Using only the front
CINEMA STUDIO EX modes are suitable for
watching motion picture DVDs (etc.), with speakers and sub woofer
multi channel surround effects. You can
reproduce the sound characteristics of Sony
(2CH STEREO)
Pictures Entertainment’s dubbing studio in
In this mode, the receiver outputs the sound
your home.
from the front left/right speakers and the sub
The CINEMA STUDIO EX modes consist of
woofer.
the following three elements.
When multi channel surround formats are
• Virtual Multi Dimension
input, the signals are downmixed to 2 channel
Creates 5 sets of virtual speakers from a
with bass frequencies being output from the
single pair of actual surround speakers.
sub woofer.
• Screen Depth Matching
When standard 2 channel stereo sources are
Creates the sensation that the sound is
input, the receiver’s bass redirection circuitry
coming from inside the screen like in
will be activated. The front channel bass
theaters.
frequencies will be output from the sub
• Cinema Studio Reverberation
woofer.
Reproduces the type of reverberation found
in theaters. MULTI CH

The CINEMA STUDIO EX modes integrate

2CH A.F.D. MOVIE MUSIC
these three elements simultaneously.
2CH 1 2 3
DUAL CATEGORY
Notes CATEGORY MONO MODE

4 5 6
• The effects provided by the virtual speakers may
cause increased noise in the playback signal.
• When listening with sound fields that employ the Press 2CH.
virtual speakers, you will not be able to hear any
sound coming directly from the surround speakers.
• This function does not work in the following cases:
– MULTI CH IN is selected.
– For signals with a sampling frequency of more
than 48 kHz.

Tip
You can identify the encoding format of DVD
software, etc., by looking at the logo on the package.
• : Dolby Digital discs
• : Dolby Surround
encoded programs
• : DTS Digital Surround encoded programs

To turn off the surround effect

for movie/music
Press 2CH to select “2CH ST.” or press A.F.D.
repeatedly to select “A.F.D. AUTO”.

52US

Resetting sound fields to Tuner Operations

the initial settings
Listening to FM/AM radio
Be sure to use the buttons on the receiver for
this operation. You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
1,2 make sure you have connected the FM and
AM antennas to the receiver (page 28).
?/1
MULTI CHANNEL DECODING
DISPLAY INPUT MODE
MASTER VOLUME

Tip
INPUT SELECTOR

SPEAKERS
(OFF/A/B/A+B) The tuning scale is:
AUTO CAL MIC

VIDEO 3 IN/PORTABLE AV IN
MEMORY/
ENTER
TUNING
MODE TUNING 2CH A.F.D. MOVIE MUSIC MULTI CH IN MUTING
FM : 100 kHz
PHONES

VIDEO L AUDIO R
AM : 10 kHz*
* The AM tuning scale can be changed (page 79).

Tuner Operations
1 Press ?/1 to turn off the power.

2 While holding down 2CH, press

?/1.
“S.F. CLR.” appears on the display and all
sound fields are reset to their initial
setting.

53US

Automatic tuning Direct tuning

Enter the frequency of a station directly by
VIDEO1 VIDEO2 VIDEO3 DVD using the numeric buttons.
MD/TAPE SA-CD/CD TUNER AUX MD/TAPE SA-CD/CD TUNER AUX

MULTI CH 1 MULTI CH 1
2CH A.F.D. MOVIE MUSIC 2CH A.F.D. MOVIE MUSIC
1 2 3 1 2 3
DUAL CATEGORY DUAL CATEGORY
CATEGORY MONO MODE
CATEGORY CATEGORY MONO MODE

4 5 6 MODE
3
4 5 6
AUDIO ANGLE JUMP/ PRESET/ AUDIO ANGLE JUMP/ PRESET/

2
TUNING TIME CH/D.SKIP TUNING TIME CH/D.SKIP

7 8 9 7 8 9
MEMORY SUBTITLE ENTER MEMORY SUBTITLE ENTER
. > . >
0/10 >10/11
D.TUNING DISC
12
ALT 4
1 Press TUNER repeatedly to 2
m
ANT
M -
CLEAR SEARCH MODE

select the FM or AM band.

2 Press TUNING + or TUNING –. 1 Press TUNER repeatedly to

Press TUNING + to scan from low to select the FM or AM band.
high; press TUNING – to scan from high You can also use INPUT SELECTOR on
to low. the receiver.
The receiver stops scanning whenever a
station is received. 2 Press D.TUNING.

Using the controls on the

3 Press the numeric buttons to
enter the frequency.
receiver
1 Turn INPUT SELECTOR to select the FM Example 1: FM 102.50 MHz
or AM band. Select 1 b 0 b 2 b 5 b 0
2 Press TUNING MODE repeatedly to select Example 2: AM 1,350 kHz
“AUTO T.”. Select 1 b 3 b 5 b 0
3 Press TUNING + or TUNING –. If you have tuned in an AM station, adjust
the direction of the AM loop antenna for
optimum reception.
In case of poor FM stereo
reception 4 Press ENTER.
If the FM stereo reception is poor and You can also use MEMORY/ENTER on
“STEREO” flashes on the display, select the receiver.
monaural audio so that the sound will be less
distorted.
For details, see “Settings for the tuner”
If you cannot tune in a station
(page 44). Make sure you have entered the right
frequency. If not, repeat steps 2 to 4. If you still
cannot tune in a station, the frequency is not
used in your area.

54US

4 Press ALT and then press the

Presetting radio stations numeric buttons to select a
preset number.
You can preset up to 30 FM stations and 30 You can also press TUNING + or
AM stations. Then you can easily tune in the TUNING – to select a preset number.
stations you often listen to. If “MEMORY” goes out before you select
the preset number, start again from step 3.
Presetting radio stations 5 Press ENTER.
You can also use MEMORY/ENTER on
MD/TAPE SA-CD/CD TUNER AUX the receiver.
The station is stored as the selected preset
MULTI CH
1 number.
2CH A.F.D. MOVIE MUSIC
If “MEMORY” goes out before you press
1 2 3
MEMORY, start again from step 3.
DUAL CATEGORY

4 CATEGORY

4 5 6
MONO MODE

6 Repeat steps 1 to 5 to preset

AUDIO ANGLE JUMP/ PRESET/
TUNING TUNING TIME CH/D.SKIP
another station.

Tuner Operations
+/– 7 8 9
MEMORY SUBTITLE ENTER

3 .
0/10
>
>10/11
D.TUNING DISC
12
ALT 5
m M -
ANT CLEAR SEARCH MODE
4
H X x

1 Press TUNER repeatedly to

select the FM or AM band.
You can also use INPUT SELECTOR on
the receiver.

2 Tune in the station that you

want to preset using Automatic
Tuning (page 54) or Direct
Tuning (page 54).
Switch the FM reception mode, if
necessary (page 54).

3 Press MEMORY.
You can also use MEMORY/ENTER on
the receiver.
“MEMORY” lights up for a few seconds.
Perform steps 4 and 5 before
“MEMORY” goes out.

55US

Tuning to preset stations Naming preset stations

MD/TAPE SA-CD/CD TUNER AUX MD/TAPE SA-CD/CD TUNER AUX

MULTI CH 1 MULTI CH 1
2CH A.F.D. MOVIE MUSIC 2CH A.F.D. MOVIE MUSIC

1 2 3 1 2 3
DUAL CATEGORY DUAL CATEGORY
CATEGORY MONO MODE CATEGORY MONO MODE

4 5 6
Numeric AUDIO ANGLE JUMP/ PRESET/ AUDIO
4
ANGLE
5 6
JUMP/ PRESET/
buttons TUNING TIME CH/D.SKIP TUNING TIME CH/D.SKIP

7
MEMORY SUBTITLE
. >
8
ENTER
9
2 7
MEMORY SUBTITLE
. >
8
ENTER
9

>10/11 12
0/10
D.TUNING DISC ALT ENTER 0/10 >10/11
D.TUNING DISC
12
ALT
m M - ALT m M -
ANT CLEAR SEARCH MODE ANT CLEAR SEARCH MODE

H X x H X x

TOP MENU/ MUTING

GUIDE AV MENU

1 Press TUNER repeatedly to F MASTER

VOL

select the FM or AM band. 4-7 G g

2 Press PRESET + or PRESET –

DISPLAY
f
O

RETURN/EXIT
repeatedly to select the preset TV/ AMP
TV VOL TV CH VIDEO MENU
station you want.
AUTO
3
Each time you press the button, you can WIDE CAL

select a preset station as follows:

01 02 03 04 05 ... 27
1 Press TUNER repeatedly to
30 29 28 select the FM or AM band.
You can also use INPUT SELECTOR on
You can also press ALT and then press the
the receiver.
numeric buttons to select the preset
station you want. Then, press ENTER to
enter the selection.
2 Tune in the preset station you
want to create an index name
for (page 56).
Using the controls on the
receiver 3 Press AMP MENU.
1 Turn INPUT SELECTOR to select the FM “1-LEVEL” appears on the display.
or AM band.
2 Press TUNING MODE repeatedly to select 4 Press control button V/v
“PRESET T.”. repeatedly to select “4-
3 Press TUNING + or TUNING – repeatedly TUNER”.
to select the preset station you want.
5 Press the control button or
control button b to enter the
menu.

56US

6 Press control button V/v

repeatedly to select “NAME IN”. Listening to the XM Radio
7 Press the control button or XM Radio is the satellite radio service with
control button b to enter the millions of listeners across the U.S.
parameter. Broadcasting live daily. XM Radio offers 160
The cursor flashes and you can select a digital radio channels offering music, news,
character. Follow the procedure given in sports, comedy, talk, entertainment, traffic and
“To create an index name” below. weather reports, with high quality digital
To return to the previous display sound.
XM $12.95 monthly service subscription sold
Press control button B. separately. XM Connect and Play(TM) antenna
required to receive XM service (sold
To create an index name separately). Installation costs and other fees
1 Use control button V/v/B/b to create an and taxes, including a one-time activation fee
index name. may apply. Subscription fee is consumer only.
Press control button V/v to select a All fees and programming subject to change.
character, then press control button B/b to Channels with frequent explicit language are

Tuner Operations
move the cursor to the next position. indicated with an XL. Channel blocking is
available for XM radio receivers by calling
If you made a mistake 1-800-XMRADIO. Subscriptions subject to
Press control button B/b until the character Customer Agreement available at
you want to change flashes, then press xmradio.com. XM service only available in
control button V/v to select the correct the 48 contiguous United States. XM Ready
character. and XM Connect-and-Play are trademarks of
XM Satellite Radio Inc. (C)2005 XM Satellite
Tip Radio Inc. All rights reserved.
You can select the character type as follows by
pressing control button V/v.
Alphabet (upper case) t Numbers t Symbols Activate XM Service:
Find the 8-character XM Radio ID of the
2 Press the control button. Connect-and-Play antenna. Record the Radio
The entered name is registered. ID here for reference: ssssssss. See
“Checking the XM Radio ID” on page 58.
(Note: The XM Radio ID does not use the
letters I, O, S, or F.)
Activate your XM Satellite Radio service
online at http://activate.xmradio.com or by
calling 1-800-XMRADIO (1-800-967-2346).
You will need a major credit card.
XM will send a signal from the satellites to
activate the full channel lineup. Activation
normally takes 10 to 15 minutes, but during
peak busy periods, you may need to keep your
player on for up to an hour. When you can
access the full channel lineup on your player,
you’re done.

continued
57US

Note
To ensure optimal reception of XM’s satellite signal, Checking the XM Radio ID
move your antenna to various window locations
around your home to see where the best reception VIDEO1 VIDEO2 VIDEO3 DVD

will be received. Most XM customers place the

antenna in a south-facing window with a clear view MD/TAPE SA-CD/CD TUNER AUX

to the sky.
MULTI CH 1
Note
Residents in Canada please see information about 2CH A.F.D. MOVIE MUSIC

XM Canada at the following webpage: 1 2 3

DUAL CATEGORY
CATEGORY MONO MODE
(http://www.xmradio.ca/)
4 5 6
AUDIO ANGLE JUMP/ PRESET/

Connecting the XM Radio 2 TUNING

7
TIME CH/D.SKIP

8 9
MEMORY SUBTITLE ENTER
. >

Before operating the system, connect the XM

Connect-and-Play antenna to the XM jack. 1 Press TUNER repeatedly to
XM jack select “XM RADIO”.
You can also use INPUT SELECTOR on
the receiver.
DIGITAL DVD
OPTICAL
VIDEO 1
IN
ANTENNA
XM 2 Press TUNING + or TUNING – to
VIDEO 2
IN
A
select channel 0.
AM
You can also press TUNING MODE on
the receiver to select “AUTO T.”, and then
turn TUNING +/– to select channel 0.
DVD

3
IN
COAXIAL
L
Check the XM Radio ID on the
L
display and write it in the space
R
IN OUT
R
IN
provided here.
SA-CD/CD MD/TAPE
ID:_____________________________
If you cannot read the characters or
numbers on the display, refer to the
following table.
Note
To ensure optional reception of XM’s satellite
signal, move your antenna to various window
locations around your home to see where the best
reception will be received. Most XM customers
place the antenna in a south-facing window with a
clear view to the sky.

58US

Display Description
Receiving XM Radio broadcasts
2 (two)
5 (five) VIDEO1 VIDEO2 VIDEO3 DVD

6 (six) MD/TAPE SA-CD/CD TUNER AUX

8 (eight)
MULTI CH 1
0 (zero)
2CH A.F.D. MOVIE MUSIC
A 1 2 3
DUAL CATEGORY
B CATEGORY MONO MODE

4 5 6
AUDIO ANGLE JUMP/ PRESET/
D
2
TUNING TIME CH/D.SKIP

7 8 9
G MEMORY SUBTITLE ENTER
. >
H
K 1 Press TUNER repeatedly to
M select the “XM RADIO”.
You can also use INPUT SELECTOR on

Tuner Operations
Q
the receiver.
Z
2 Press TUNING + or TUNING – to
select a channel.
You can also press TUNING MODE on
the receiver to select “AUTO T.”, and then
turn TUNING +/– to select a channel.

59US

Notes
Selecting channels from a • When you select a channel in the “ONE CAT”
category (CATEGORY TUNING) mode, the channel you selected may not be the one
in the category you want. This is because one
You can select a channel from one category or channel may belong to more than one category.
all the categories by changing the category • If you press CATEGORY + or CATEGORY – in
mode. the “ALL CAT” mode, the first channel of the next
or previous category is selected (CATEGORY
MD/TAPE SA-CD/CD TUNER AUX
SKIP).
MULTI CH 1
2CH A.F.D. MOVIE MUSIC
Selecting channels by inputting
1 2 3
DUAL CATEGORY
the channel number directly
CATEGORY MONO MODE
(DIRECT TUNING)
3 AUDIO
4
ANGLE
5 6
JUMP/ PRESET/
2
TUNING TIME CH/D.SKIP

4 7 8 9 MD/TAPE SA-CD/CD TUNER AUX

1 Press TUNER repeatedly to

MULTI CH 1
select the “XM RADIO”. 2CH A.F.D. MOVIE MUSIC

1 2 3

2 Press CATEGORY MODE CATEGORY

4 5 6
DUAL CATEGORY
MONO MODE

repeatedly to select the “ONE 3 AUDIO ANGLE

TUNING
JUMP/ PRESET/
TIME CH/D.SKIP

CAT”. 7 8 9
MEMORY SUBTITLE ENTER
• ALL CAT: You can select a channel from all . >

the categories. The initial setting is “ALL

m
0/10 >10/11
D.TUNING

M
DISC
-
12
ALT 4
CAT”.
ANT CLEAR SEARCH MODE
• ONE CAT: You can select a channel from one
category. “CAT” is displayed on the display
2 H X x
when you set to “ONE CAT” mode.

3 Press CATEGORY + or 1 Press TUNER repeatedly to

CATEGORY – to select the select the “XM RADIO”.
category you want.
You can also use INPUT SELECTOR on
The category is selected and the channel the receiver.
with the lowest number in the specified
category is selected. 2 Press D.TUNING.
4 Press TUNING + or TUNING – to 3 Press the numeric buttons to
select the channel. enter the channel number.
You can also press TUNING MODE on
the receiver to select “AUTO T.”, and then 4 Press ENTER.
turn TUNING +/– to select the channel. You can also use MEMORY/ENTER on
the receiver.
The selected channel is tune in.

60US

Displaying the XM-RADIO

information on the front panel
Presetting XM Radio
display stations
DISPLAY You can select the channels you want directly
by presetting them using the preset numbers.
?/1
You can preset up to 30 XM Radio channels.
MASTER VOLUME
MULTI CHANNEL DECODING
DISPLAY INPUT MODE

INPUT SELECTOR

SPEAKERS
(OFF/A/B/A+B)

AUTO CAL MIC

PHONES
VIDEO 3 IN/PORTABLE AV IN
MEMORY/
ENTER
TUNING
MODE TUNING 2CH A.F.D. MOVIE MUSIC MULTI CH IN MUTING
Presetting channels using the
VIDEO L AUDIO R
preset numbers

Press DISPLAY on the receiver VIDEO1 VIDEO2 VIDEO3 DVD

repeatedly.
MD/TAPE SA-CD/CD TUNER AUX

Each time you press DISPLAY while tuning in

the channel, the display changes cyclically as MULTI CH 1
follows:

Tuner Operations
2CH A.F.D. MOVIE MUSIC
Channel name t Channel number t
1 2 3
Category t Artist name/Feature t CATEGORY
DUAL CATEGORY
MONO MODE

Song/Program title t Sound field type 4 5 6

AUDIO ANGLE JUMP/ PRESET/
TUNING TIME CH/D.SKIP

Tip 7 8 9 PRESET
The preset number is always displayed at the right MEMORY SUBTITLE ENTER
+/–
end of the display. 3 .
0/10
>
>10/11
D.TUNING DISC
12
ALT
5
m M -

4
ANT CLEAR SEARCH MODE

1 Press TUNER repeatedly to

select the “XM RADIO”.
You can also use INPUT SELECTOR on
the receiver.

2 Tune in the channel you want to

preset.
For details on selecting channels, see
“Listening to the XM Radio” (page 57).

3 Press MEMORY.
You can also use MEMORY/ENTER on
the receiver.

continued
61US

4 Press ALT and then press the

numeric buttons to enter the Selecting the channel by using
preset number. the preset numbers
You can also select the number by
pressing PRESET + or PRESET –. MD/TAPE SA-CD/CD TUNER AUX

You can also turn TUNING +/– on the

receiver.
MULTI CH
1
2CH A.F.D. MOVIE MUSIC

Preset numbers from 1 to 30 are available, 1 2 3

DUAL CATEGORY
CATEGORY MONO MODE
and channel 1 is preset for all the preset
Numeric 4 5 6
numbers when you purchase the receiver. buttons
AUDIO ANGLE
TUNING
JUMP/ PRESET/
TIME CH/D.SKIP

5 Press ENTER.
7
MEMORY SUBTITLE
. >
8
ENTER
9

2
You can also use MEMORY/ENTER on 0/10 >10/11
D.TUNING DISC
12
ALT ENTER
the receiver. m M -
ANT CLEAR SEARCH MODE
ALT
6 Repeat steps 2 to 5 to preset
another channel. 1 Press TUNER repeatedly to
select the “XM RADIO”.

2 Press PRESET + or PRESET –

repeatedly to select the preset
channel you want.
You can also press ALT and then press the
numeric buttons to select the preset
channel you want. Then press ENTER to
enter the selection.
You can also press TUNING MODE on
the receiver to select “PRESET T.”, and
then turn TUNING +/–.
You can select preset channels from 1 to
30.
Note
The preset channel information will be updated
depending on the service provided by the XM
Satellite Radio Inc. that you have subscribed to.

62US

XM Radio messages list

Message Explanation Remedies
appears
ANTENNA The XM antenna is not Make sure that the antenna is securely connected.
connected or transmission is
not being received properly.
UPDATING The encryption code is being Wait until the encryption code has been updated.
updated.
NO SIGNL The signal is too weak. Adjust the antenna so that the signal is as strong as possible.
LOADING The audio channel or Wait until the audio channel or information has been acquired.
information is being
acquired.
OFF AIR The selected channel is off Make sure that you selected the channel properly.
the air. Try to select another channel.
(space)–––– There is no characteristic —
information such as an artist
name, song title or program
title available.

Tuner Operations
–– The preset number entered is Enter a number from 1 to 30.
an invalid number.
–––CH The selected channel is not —
available.

63US

HT-7000DH
2-662-265-11 (1)
C:\Documents and masterpage: Left
Settings\pc13\Desktop\J9052007_2662265111HT7000DH_US\2662265111\US06OTH_HT-
7000DH-U.fm
US01COV_HT-7000DH-U.book Page 64 Wednesday, January 25, 2006 3:30 PM

Other Operations Watching component

images from other inputs
Switching the audio input (COMPONENT VIDEO ASSIGN)
mode
You can reassign a component video input to
(INPUT MODE) another input.

You can select the audio input mode by setting 1 Press AMP MENU.
the audio input mode when you connect “1-LEVEL” appears on the display.
components to both digital and analog audio
input jacks on the receiver. 2 Press control button V/v
repeatedly to select “6-VIDEO”.
1 Turn INPUT SELECTOR on the
receiver to select the input. 3 Press the control button or
control button b to enter the
You can also use the input buttons on the
menu.
remote.

2 Press INPUT MODE repeatedly

4 Press control button V/v
repeatedly to select
on the receiver to select the “COMP. V. A.”.
audio input mode.
The selected audio input mode appears on 5 Press the control button or
the display. control button b to enter the
parameter.
Audio input modes 6 Press control button V/v
• AUTO IN repeatedly to select the
Gives priority to digital audio signals when component video input you
there are both digital and analog want to reassign (for example,
connections. If there are no digital audio DVD).
signals, analog audio signals are selected.
• COAX IN 7 Press the control button or
Specifies the digital audio signals input to control button b to enter your
the DIGITAL COAXIAL jack. selection.
• OPT IN
Specifies the digital audio signals input to
the DIGITAL OPTICAL jack.
• ANALOG
Specifies the analog audio signals input to
the AUDIO IN (L/R) jacks.
Note
Some audio input modes may not be set up
depending on the input.

64US

HT-7000DH
2-662-625-11 (1)
C:\Documents and masterpage: Right
Settings\pc13\Desktop\J9052007_2662265111HT7000DH_US\2662265111\US06OTH_HT-
7000DH-U.fm
US01COV_HT-7000DH-U.book Page 65 Wednesday, January 25, 2006 3:30 PM

8 Press control button V/v

repeatedly to select the input Watching HDMI images
you want the component video
input selected in step 6 to be from other inputs
reassigned to (for example, (HDMI ASSIGN)
VIDEO 1).
In this case, select “DVD–VD1”. You can reassign a HDMI input to another
When you press VIDEO 1, the image input.
from the component connected to the
VIDEO 1 jacks will be a component 1 Press AMP MENU.
image. The input you can reassign to “1-LEVEL” appears on the display.
varies for each component video input.
For details, see “Assignable inputs for 2 Press control button V/v
component video input” below. repeatedly to select “6-VIDEO”.
To return to the previous display 3 Press the control button or
Press control button B. control button b to enter the
menu.
Assignable inputs for 4 Press control button V/v
component video input repeatedly to select “HDMI A.”.
Component Assignable Display 5 Press the control button or

Other Operations
video input inputs
control button b to enter the
DVD VIDEO 1 DVD–VD1 parameter.
VIDEO 3 DVD–VD3
DVD DVD–DVD
6 Press control button V/v
repeatedly to select the HDMI
MD/TAPE DVD–MD input you want to reassign (for
SA-CD/CD DVD–CD example, DVD).
VIDEO 2 VIDEO 1 VD2–VD1 7 Press the control button or
VIDEO 2 VD2–VD2 control button b to enter your
VIDEO 3 VD2–VD3 selection.
MD/TAPE VD2–MD “HDMI” flashes on the display.
SA-CD/CD VD2–CD

Notes
• You cannot reassign more than one component
video input to the same input.
• You cannot use the component video input as the
original input when it has been reassigned to
another input.

continued
65US

HT-7000DH
2-662-625-11 (1)
C:\Documents and masterpage: Left
Settings\pc13\Desktop\J9052007_2662265111HT7000DH_US\2662265111\US06OTH_HT-
7000DH-U.fm
US01COV_HT-7000DH-U.book Page 66 Wednesday, January 25, 2006 3:30 PM

8 Press control button V/v

repeatedly to select the input Naming inputs
you want the HDMI input
selected in step 6 to be You can enter a name of up to 8 characters for
reassigned to (for example, inputs and display it on the receiver’s display.
VIDEO 1). This is convenient for labeling the jacks with
In this case, select “DVD–VD1”. the names of the connected components.
When you press VIDEO 1, the image
from the component connected to the
1 Press the input button to select
VIDEO 1 jacks will be a HDMI image.
the input you want to create an
The sound will be output from the TV index name for.
speaker. For details, see “Hooking up You can also use INPUT SELECTOR on
components with HDMI jacks” (page 25). the receiver.
The input you can reassign to varies for
each HDMI input. For details, see 2 Press AMP MENU.
“Assignable inputs for HDMI input” “1-LEVEL” appears on the display.
below.
3 Press control button V/v
To return to the previous display repeatedly to select either
Press control button B. “5-AUDIO” or “6-VIDEO”.

Assignable inputs for HDMI 4 Press the control button or

input control button b to enter the
menu.
HDMI input Assignable Display
inputs 5 Press control button V/v to
DVD VIDEO 1 DVD–VD1 select “NAME IN”.
VIDEO 3 DVD–VD3
DVD DVD–DVD
6 Press the control button or
control button b to enter the
MD/TAPE DVD–MD parameter.
SA-CD/CD DVD–CD The cursor flashes and you can select a
VIDEO 2 VIDEO 1 VD2–VD1 character. Follow the procedure given in
VIDEO 2 VD2–VD2 “To create an index name” (page 57).
VIDEO 3 VD2–VD3 To return to the previous display
MD/TAPE VD2–MD Press control button B.
SA-CD/CD VD2–CD

Notes
• You cannot reassign more than one HDMI input to
the same input.
• You cannot use the HDMI input as the original
input when it has been reassigned to another input.

66US

Changing the display Using the Sleep Timer

You can check the sound field, etc., by You can set the receiver to turn off
changing the information on the display. automatically at a specified time.
Be sure to use the buttons on the receiver for
this operation. Press ALT and then press SLEEP
repeatedly while the power is on.
Press DISPLAY repeatedly.
Each time you press the button, the display
Each time you press the button, the display
changes cyclically as follows:
changes cyclically as follows.
2-00-00 t 1-30-00 t 1-00-00 t 0-30-00
t OFF
All inputs except the FM and AM
band When Sleep Timer is being used, “SLEEP”
Index name of the inputa) t Selected input lights up on the display.
t Sound field currently applied
Tip
To check the remaining time before the receiver
FM and AM band turns off, press ALT and then press SLEEP. The
Preset station namea) t Frequency t Sound remaining time appears on the display. If you press
field currently applied SLEEP again, the sleep timer will be canceled.

Other Operations
Index name appears only when you have assigned
one to the input or preset station (page 56, 66).
Index name does not appear when only blank
spaces have been entered, or it is the same as the
input name.

67US

Recording onto a recording

Recording using the media
receiver You can record from a video component using
the receiver. See the operating instructions
Recording onto a MiniDisc or supplied with your recording component.
audio tape
1 Press one of the input buttons
You can record onto a MiniDisc or audio tape to select the playback
using the receiver. See the operating component.
instructions supplied with your MD deck or You can also use INPUT SELECTOR on
tape deck. the receiver.

1 Press one of the input buttons 2 Prepare the playback

to select the playback component for playing.
component. For example, insert the video tape you
You can also use INPUT SELECTOR on want to copy into the VCR.
the receiver.
3 Prepare the recording
2 Prepare the playback component.
component for playing. Insert a blank video tape, etc. into the
For example, insert a CD into the CD recording component (VIDEO 1) for
player. recording.

3 Prepare the recording 4 Start recording on the

component. recording component, then
Insert a blank MD or tape into the start playback on the playback
recording deck and adjust the recording component.
level.
Notes
4 Start recording on the • Some sources contain copy guards to prevent
recording. In this case, you may not be able to
recording component, then
record from the source.
start playback on the playback • The audio signals input to the MULTI CH IN jacks
component. are not output from the analog AUDIO OUT jacks
even when MULTI CH IN is selected. The analog
Notes audio signals of the current or previously used
• Sound adjustments do not affect the signal output input are output.
from the MD/TAPE OUT jacks.
• The audio signals input to the MULTI CH IN jacks
are not output from the analog OUT jacks even
when MULTI CH IN is selected. The analog audio
signals of the current or previously used input are
output.

68US

HT-7000DH
2-662-625-11 (1)
C:\Documents and masterpage: Right
Settings\pc13\Desktop\J9052007_2662265111HT7000DH_US\2662265111\US07REM_HT-
7000DH-U.fm
US01COV_HT-7000DH-U.book Page 69 Wednesday, January 25, 2006 3:30 PM

5 Repeat steps 1 to 4 to control

other components.
Using the Remote
To cancel programming
Programming the remote Press RM SET UP during any step. The
remote automatically exits the programming
You can program the remote to control non-
mode.
Sony components by changing the code. Once
the control signals have been memorized, you
can use those components as part of your To activate the input after
system. programming
Furthermore, you can also program the remote Press the programmed button to activate the
for Sony components that the remote is unable input you want.
to control. Note that the remote can only
control components that accept infrared If programming is
wireless control signals. unsuccessful, check the
following:
1 Press AV ?/1 while holding
• If the indicator does not light up in step 1, the
down RM SET UP.
batteries are weak. Replace both batteries.
The indicator lights up. • If the indicator flashes 4 times in quick
succession while entering the numeric code,
2 Press the input button
an error has occurred. Start again from step
(including TV ?/1) for the 1.
component you want to control.
For example, if you are going to control a Notes
• The indicator turns off while a valid button is
CD player, press SA-CD/CD.

Using the Remote

pressed.
3 Press the numeric buttons to • In step 2, if several input buttons are pressed, only
the last pressed button is valid.
enter the numeric code (or one • In step 2, if you press TV ?/1, only TV VOL +/– ,
of the codes if more than one TV CH +/–, TV/VIDEO and WIDE buttons are
code exists) corresponding to reprogrammed.
the component and the maker • In step 3, if an input button is pressed, the new
input is selected and the programming procedure
of the component you want to
returns to the beginning of step 3.
control. • For the numeric codes, only the first three numbers
See the tables on page 70 for information entered are valid.
on the numeric code(s) corresponding to
the component and the maker of the To clear the memory of the
component (the first digit and the last two remote
digits of the numeric code correspond to
To clear all programmes, do the following to
the category and the maker’s code
reset the remote to factory settings.
respectively).
Press ?/1, AV ?/1 and MASTER
4 Press ENTER.
VOL – at the same time.
Once the numeric code has been verified,
The indicator flashes 3 times, then goes off.
the indicator slowly flashes twice and the
remote automatically exits the
programming mode.
continued
69US

HT-8000MH
2-662-265-11 (1)
C:\Documents and masterpage: Left
Settings\pc13\Desktop\J9052007_2662265111HT7000DH_US\2662265111\US07REM_HT-
7000DH-U.fm
US01COV_HT-7000DH-U.book Page 70 Wednesday, January 25, 2006 3:30 PM

The numeric codes To control a DAT deck

corresponding to the Maker Code(s)
component and the maker of
SONY 203
the component
PIONEER 219
Use the numeric codes in the tables below to
control non-Sony components and also Sony
components that the remote is normally unable To control an MD deck
to control. Since the remote signal that a Maker Code(s)
component accepts differs depending on the SONY 301
model and year of the component, more than
DENON 302
one numeric code may be assigned to a
component. If you fail to program your remote JVC 303
using one of the codes, try using other codes. KENWOOD 304

Notes
• The numeric codes are based on the latest
To control a tape deck
information available for each brand. There is a Maker Code(s)
chance, however, that your component will not SONY 201, 202
respond to some or all of the codes.
• All of the input buttons on this remote may not be DENON 204, 205
available when used with your particular KENWOOD 206, 207, 208, 209
component. NAKAMICHI 210
PANASONIC 216
To control a CD player PHILIPS 211, 212
Maker Code(s) PIONEER 213, 214
SONY 101, 102, 103 TECHNICS 215, 216
DENON 104, 123 YAMAHA 217, 218
JVC 105, 106, 107
KENWOOD 108, 109, 110 To control an LD player
MAGNAVOX 111, 116 Maker Code(s)
MARANTZ 116 SONY 601, 602, 603
ONKYO 112, 113, 114 PIONEER 606
PANASONIC 115
PHILIPS 116 To control a video CD player
PIONEER 117 Maker Code(s)
TECHNICS 115, 118, 119 SONY 605
YAMAHA 120, 121, 122

70US

HT-8000MH
2-662-265-11 (1)
C:\Documents and masterpage: Right
Settings\pc13\Desktop\J9052007_2662265111HT7000DH_US\2662265111\US07REM_HT-
7000DH-U.fm
US01COV_HT-7000DH-U.book Page 71 Wednesday, January 25, 2006 3:30 PM

To control a VCR To control a DVD recorder

Maker Code(s) Maker Code(s)
SONY 701, 702, 703, 704, SONY 403
705, 706
AIWA* 710, 750, 757, 758 To control a TV
AKAI 707, 708, 709, 759
Maker Code(s)
BLAUPUNKT 740
SONY 501, 502
EMERSON 711, 712, 713, 714,
715, 716, 750 DAEWOO 504, 505, 506, 507,
515, 544
FISHER 717, 718, 719, 720
FISHER 508
GENERAL ELECTRIC 721, 722, 730
GOLDSTAR/LG 503, 511, 512, 515,
GOLDSTAR/LG 723, 753 534, 544
GRUNDIG 724 GRUNDIG 517, 534
HITACHI 722, 725, 729, 741 HITACHI 513, 514, 515, 544
ITT/NOKIA 717 ITT/NOKIA 521, 522
JVC 726, 727, 728, 736 JVC 516
MAGNAVOX 730, 731, 738 MAGNAVOX 503, 518, 544
MITSUBISHI/MGA 732, 733, 734, 735 MITSUBISHI/MGA 503, 519, 544
NEC 736 NEC 503, 520, 544
PANASONIC 729, 730, 737, 738, PANASONIC 509, 524
739, 740
PHILIPS 515, 518
PHILIPS 729, 730, 731
PIONEER 509, 525, 526, 540
PIONEER 729
RCA/PROSCAN 510, 527, 528, 529,
RCA/PROSCAN 722, 729, 730, 731,

Using the Remote

544
741, 747
SAMSUNG 503, 515, 531, 532,
SAMSUNG 742, 743, 744, 745 533, 534, 544
SANYO 717, 720, 746 SANYO 508, 545, 546, 547
SHARP 748, 749 SHARP 535
TELEFUNKEN 751, 752 TELEFUNKEN 523, 536, 537, 538
TOSHIBA 747, 755, 756 THOMSON 530, 537, 539
ZENITH 754 TOSHIBA 535, 540, 541
* If an AIWA VCR does not work even though you ZENITH 542, 543
enter the code for AIWA, enter the code for Sony
instead.
To control a satellite tuner or
cable box
To control a DVD player Maker Code(s)
Maker Code(s) SONY 801, 802, 803, 804
SONY 401, 402, 403 JERROLD/G.I. 806, 807, 808, 809,
PANASONIC 406, 408 810, 811, 812, 813,
814
PHILIPS 407
PANASONIC 818
PIONEER 409
RCA 805, 819
TOSHIBA 404
S. ATLANTA 815, 816, 817
DENON 405
continued
71US

To control a tuner
Maker Code(s) Additional Information
SONY 002, 003, 004, 005

To control a hard disc recorder

Glossary
Maker Code(s) x Component video
SONY 307, 308, 309 A format for transmitting video signal
information consisting of three separate
To control a blu-ray disc signals: luminance Y, chrominance Pb, and
recorder chrominance Pr. High quality pictures, such as
DVD video or HDTV pictures, are transmitted
Maker Code(s) more faithfully. The three jacks are color -
SONY 310, 311, 312 coded green, blue and red.

To control a PSX x Composite video

A standard format for transmitting video
Maker Code(s)
signal information. The luminance signal Y
SONY 313, 314, 315 and chrominance signal C are combined and
transmitted together.

x Dolby Digital
Digital audio encoding/decoding technology
developed by Dolby Laboratories, Inc. It
consists of front (left/right), center, surround
(left/right) and sub woofer channels. It is a
designated audio standard for DVD-video and
also known as 5.1ch surround. Since surround
information is recorded and reproduced in
stereo, more realistic sound with fuller
presence is delivered than with Dolby
surround.

x Dolby Pro Logic II

This technology converts 2ch stereo recorded
audio into 5.1ch for playback. There is a
MOVIE mode for movies and MUSIC mode
for stereo sources such as music. Old movies
encoded in the traditional stereo format can be
enhanced with 5.1ch surround sound.

72US

x Dolby Surround (Dolby Pro

Logic)
Audio processing technology developed by
Precautions
Dolby Laboratories, Inc. Center and mono
surround information is matrixed into two On safety
stereo channels. When reproduced, audio is Should any solid object or liquid fall into the
decoded and output in 4ch surround sound. cabinet, unplug the receiver and have it
This is the most common audio processing checked by qualified personnel before
method for DVD-video. operating it any further.

x DTS Digital Surround

Digital audio encoding/decoding technology On power sources
for theaters developed by Digital Theater • Before operating the receiver, check that the
Systems, Inc. It compresses audio less than operating voltage is identical with your local
Dolby Digital, delivering a higher quality power supply.
sound reproduction. The operating voltage is indicated on the
nameplate on the back of the receiver.
x HDMI (High-Definition • The unit is not disconnected from the AC
Multimedia Interface) power source (mains) as long as it is
Technology developed by modifying the connected to the wall outlet, even if the unit
display connecting technology, DVI (Digital itself has been turned off.
Visual Interface), for AV equipment. This • If you are not going to use the receiver for a
interface can transmit video, audio, and long time, be sure to disconnect the receiver
control signals in digital format. from the wall outlet. To disconnect the AC
power cord, grasp the plug itself; never pull
x Sampling frequency the cord.
To convert analog audio to digital, analog data • One blade of the plug is wider than the other
should be quantified. This process is called for the purpose of safety and will fit into the
sampling, and the number of times per second wall outlet only one way. If you are unable to
the analog data is quantified is called the insert the plug fully into the outlet, contact

Additional Information
sampling frequency. A standard music CD your dealer.
stores data quantified at 44,100 times per • The AC power cord must be changed only at
second, which is expressed as a sampling a qualified service shop.
frequency of 44.1 kHz. Generally speaking, a
higher sampling frequency means better sound
On heat buildup
quality.
Although the receiver heats up during
operation, this is not a malfunction. If you
continuously use this receiver at a large
volume, the cabinet temperature of the top,
side and bottom rises considerably. To avoid
burning yourself, do not touch the cabinet.

continued
73US

On placement If color irregularity is observed

• Place the receiver in a location with adequate again...
ventilation to prevent heat buildup and Place the speaker further away from the TV
prolong the life of the receiver. set.
• Do not place the receiver near heat sources,
or in a place subject to direct sunlight, If howling occurs
excessive dust, or mechanical shock.
Reposition the speakers or turn down the
• Do not place anything on top of the cabinet
volume on the receiver.
that might block the ventilation holes and
cause malfunctions.
• Do not place the receiver near equipment On cleaning
such as a television, VCR, or tape deck. (If Clean the cabinet, panel, and controls with a
the receiver is being used in combination soft cloth slightly moistened with a mild
with a television, VCR, or tape deck, and is detergent solution. Do not use any type of
placed too close to that equipment, noise abrasive pad, scouring powder, or solvent,
may result, and picture quality may suffer. such as alcohol or benzine.
This is especially likely when using an
indoor antenna. Therefore, we recommend If you have any questions or problems
using an outdoor antenna.) concerning your receiver, please consult your
• Use caution when placing the receiver or nearest Sony dealer.
speakers on surfaces that have been specially
treated (with wax, oil, polish, etc.) as
staining or discoloration of the surface may
result.

On operation
Before connecting other components, be sure
to turn off and unplug the receiver.

If you encounter color

irregularity on a nearby TV
screen
The front and center speakers and the sub
woofer are magnetically shielded to allow it to
be installed near a TV set. However, color
irregularities may still be observed on certain
types of TV sets. As the surround speakers are
not magnetically shielded, we recommend that
you place the surround speakers slightly
further away from the TV set (page 14).

If color irregularity is
observed...
Turn off the TV set, then turn it on again after
15 to 30 minutes.

74US

There is no sound from one of the front

Troubleshooting speakers.
• Connect a pair of headphones to the
If you experience any of the following PHONES jack to verify that sound is
difficulties while using the receiver, use this output from the headphones. If only one
troubleshooting guide to help you remedy the channel is output from the headphones, the
problem. component may not be connected to the
receiver correctly. Check that all the cords
There is no sound, no matter which are fully inserted into the jacks on both the
component is selected, or only a very receiver and the component. If both
low-level sound is heard. channels are output from the headphones,
• Check that the speakers and components the front speaker may not be connected to
are connected securely. the receiver correctly. Check the
• Check that both the receiver and all connection of the front speaker which is
components are turned on. not outputting any sound.
• Check that MASTER VOLUME is not set • Make sure you have connected to both the
to “VOL MIN”. L and R jacks of an analog component, and
• Check that the SPEAKERS (OFF/A/B/ not only to either the L or R jack. Use an
A+B) is not set to “OFF”. audio cord (not supplied).
• Check that headphone is not connected.
• Press MUTING to cancel the muting There is no sound from analog 2
function. channel sources.
• Check that you have selected the correct • Check that the INPUT MODE is not set to
component with the input buttons. “COAX IN” or “OPT IN” for the selected
• The protective device on the receiver has input (page 64).
been activated. Turn off the receiver, • Check that the MULTI CH IN function is
eliminate the short-circuit problem, and not selected.
turn on the power again.
There is no sound from digital sources
There is no sound from a specific (from COAXIAL or OPTICAL input jack).

Additional Information
component. • Check that the INPUT MODE is not set to
• Check that the component is connected “ANALOG” (page 64). Check that the
correctly to the audio input jacks for that INPUT MODE is not set to “COAX IN”
component. for the sources from the OPTICAL input
• Check that the cord(s) used for the jack, or to “OPT IN” for the sources from
connection is (are) fully inserted into the the COAXIAL input jack.
jacks on both the receiver and the • Check that the MULTI CH IN function is
component. not selected.

continued
75US

The source sound input to the HDMI The surround effect cannot be
jack on the receiver is not output from obtained.
the TV speaker. • Make sure the sound field function is on
• Check the HDMI connection. (press MOVIE, or MUSIC).
• You cannot listen to the Super Audio CD • Sound fields do not function for signals
by connecting HDMI. with a sampling frequency of more than 48
• Depending on the playback component, kHz.
you may need to set up the component.
Refer to the operating instructions Dolby Digital or DTS multi channel
supplied with each component. sound is not reproduced.
• Check that the DVD, etc. you are playing
The left and right sounds are is recorded in Dolby Digital or DTS
unbalanced or reversed. format.
• Check that the speakers and components • When connecting the DVD player, etc., to
are connected correctly and securely. the digital input jacks of this receiver,
• Adjust the balance parameters using the check the audio setting (the settings for the
LEVEL menu. audio output) of the connected component.

There is severe hum or noise. Recording cannot be carried out.

• Check that the speakers and components • Check that the components are connected
are connected securely. correctly.
• Check that the connecting cords are away • Select the source component using the
from a transformer or motor, and at least input buttons.
3 m away from a TV set or fluorescent
light. The FM reception is poor.
• Move your audio components away from • Use a 75-ohm coaxial cable (not supplied)
the TV. to connect the receiver to an outdoor FM
• The plugs and jacks are dirty. Wipe them antenna as shown below. If you connect
with a cloth slightly moistened with the receiver to an outdoor antenna, ground
alcohol. it against lightning. To prevent a gas
explosion, do not connect the ground wire
There is no sound, or only a very low- to a gas pipe.
level sound is heard from the center/
surround speakers. Outdoor FM antenna

• Select a CINEMA STUDIO EX mode Receiver

(page 51). ANTENNA

• Adjust the speaker level (page 34).

There is no sound from the sub woofer. Ground wire

• Check that the sub woofer is connected (not supplied)
correctly and securely.
• Make sure you have turned on your sub
woofer. To ground

76US

Radio stations cannot be tuned in. The source image input to the HDMI
• Check that the antennas are connected jack on the receiver is not output from
securely. Adjust the antennas and connect the TV.
an external antenna, if necessary. • Check the HDMI connection.
• The signal strength of the stations is too • Depending on the playback component,
weak (when tuning in with automatic you may need to set up the component.
tuning). Use direct tuning. Refer to the operating instructions
• Make sure you set the tuning interval supplied with the each component.
correctly (when tuning in AM stations • Assign the HDMI input correctly.
with direct tuning).
• No stations have been preset or the preset
stations have been cleared (when tuning by
scanning preset stations). Preset the Remote control
stations (page 61).
• Press DISPLAY repeatedly on the receiver The remote does not function.
so that the frequency appears on the • Point the remote at the remote sensor on
display. the receiver.
• Remove any obstacles in the path between
There is no picture or an unclear the remote and the receiver.
picture appears on the TV screen or • Replace all the batteries in the remote with
monitor. new ones, if they are weak.
• Select the appropriate input using the input • Make sure you select the correct input on
buttons. the remote.
• Set your TV to the appropriate input mode. • The 12 button on the remote is not
• Move your audio components away from available for receiver operation.
the TV.
• Assign the component video input
correctly.

The MULTI CHANNNEL DECODING

Additional Information
lamp does not light up in blue.
• Check that the playback component is
connected to a digital jack and the input is
selected properly on this receiver.
• Check whether the input source of the
software being played back corresponds to
the multi channel format.
• Check whether the setup on the playback
component is set to multi channel sound.

continued
77US

Error messages
If there is a malfunction, the display shows a Specifications
message. You can check the condition of the
system by the message. Refer to the following
table to solve the problem. If any problem AUDIO POWER
persists, consult your nearest Sony dealer. SPECIFICATIONS
If an error message appears while you perform POWER OUTPUT AND TOTAL
Auto Calibration, see “Error and warning HARMONIC DISTORTION:
codes” (page 32) to solve the problem. (Models of area code U only)
With 6 ohm loads, both channels driven, from
DEC. EROR 120 – 20,000 Hz; rated 90 watts per channel
Appears when a signal the receiver cannot minimum RMS power, with no more than
decode (ex. DTS-CD) is input and “DEC. 0.7% total harmonic distortion from 250
PRI.” on the AUDIO menu is set to “DEC. milliwatts to rated output.
PCM”. Set it to “DEC. AUTO” (page 41).
Amplifier section
PROTECT Power Output1)
Irregular current is output from the Models of area code U
speakers. The receiver will automatically (6 ohms 1 kHz, THD 10%)
turn off after a few seconds. Check the FRONT2): 140 W/ch
speaker connection and turn on the power CENTER2): 140 W
again. SUR2): 140 W/ch

Models of area code CA

(6 ohms 1 kHz, THD 0.7%)
If you are unable to remedy the FRONT2): 90 W/ch
problem using the CENTER2): 90 W
troubleshooting guide SUR2): 90 W/ch
Clearing the receiver’s memory may remedy
(6 ohms 1 kHz, THD 10%)
the problem (page 29). However, note that all
FRONT2): 140 W/ch
memorized settings will be reset to their
CENTER2): 140 W
factory settings and you will have to readjust
SUR2): 140 W/ch
all settings on the receiver.
1)
Measured under the following conditions:
If the problem persist
Area code Power requirements
Consult your nearest Sony dealer. Note that if
U, CA 120 V AC, 60 Hz
service personnel changes some parts during
repair, these parts may be retained. 2) Depending on the sound field settings and the
source, there may be no sound output.
Reference sections for clearing
the receiver’s memory Inputs (Analog)

To clear See MULTI CH IN, Sensitivity: 800 mV

SA-CD/CD, Impedance: 50 kohms
All memorized settings page 29 MD/TAPE, DVD,
Customized sound fields page 53 VIDEO 1, 2, 3

78US

Inputs (Digital) Video section

Inputs/Outputs
DVD (Coaxial) Sensitivity: –
Impedance: 75 ohms Video: 1 Vp-p, 75 ohms
VIDEO 1, 2 Sensitivity: – COMPONENT VIDEO:
(Optical) Impedance: – Y: 1 Vp-p, 75 ohms
PB/CB/B-Y: 0.7 Vp-p,
Outputs (Analog) 75 ohms
MD/TAPE (OUT), Voltage: 800 mV PR/CR/R-Y: 0.7 Vp-p,
VIDEO 1 (AUDIO Impedance: 10 kohms 75 ohms
OUT) 80 MHz HD Pass Through
SUB WOOFER Voltage: 2 V
Impedance: 1 kohm General
Power requirements
Reproduction frequency range: Area code Power requirements
28 – 20,000 Hz
U, CA 120 V AC, 60 Hz

Tone Power consumption

Gain levels ±6 dB, 1 dB step Area code Power consumption
U 170 W
FM tuner section
Tuning range 87.5 - 108.0 MHz CA 230 VA
Antenna FM wire antenna
Power consumption (during standby mode)
Antenna terminals 75 ohms, unbalanced
0.2 W
Intermediate frequency
Dimensions (w/h/d) (Approx.)
10.7 MHz
430 × 157.5 × 316 mm
(16 7/8 × 6 2/8 × 12 4/8
AM tuner section
inches) including
Tuning range
projecting parts and
Models of area code U, CA controls
With 10-kHz tuning scale: Mass (Approx.) 8.0 kg (17 lb 11 oz)

Additional Information
530 – 1,710 kHz3)
With 9-kHz tuning scale:
531 – 1,710 kHz3)
Antenna Loop antenna
Intermediate frequency
450 kHz
3) Youcan change the AM tuning scale to 9 kHz or
10 kHz. After tuning in any AM station, turn off
the receiver. While holding down TUNING
MODE, press ?/1. All preset stations will be
erased when you change the tuning scale. To reset
the scale to 10 kHz (or 9 kHz), repeat the
procedure.

continued
79US

Speaker section • Sub woofer (SA-WP780)

• Front speakers (SS-MSP7000)
• Center speaker (SS-CNP900)
AUDIO POWER
• Surround speakers (SS-SRP7000)
Front speakers 2 way, magnetically
SPECIFICATIONS
shielded POWER OUTPUT AND TOTAL
Center speaker Full range, magnetically HARMONIC DISTORTION:
shielded With 6 ohm loads, from 28 – 200 Hz; rated 120
Surround speakers Full range watts, minimum RMS power, with no more
Speaker units than 0.7% total harmonic distortion from 250
Front speakers Tweeter: 40 mm cone type milliwatts to rated output.
Woofer: 80 mm cone type
Center/surround speakers Speaker system Active subwoofer,
80 mm cone type magnetically shielded
Enclosure type Bass reflex Speaker unit 200 mm cone type
Rated Impedance 6 ohms Enclosure type Acoustically loaded bass
Dimension (w/h/d) (Approx.) reflex
Front speakers 130 × 211 × 136 mm RMS output 150 W (6 ohms, 100 Hz,
(5 1/8 × 8 1/4 × 5 3/8 THD 10%)
inches) Music power 200 W
Center speaker 245 × 109 × 136 mm Input LINE IN (input pin jacks)
(9 5/8 × 4 3/8 × 5 3/8 Power requirements 120 V AC, 60 Hz
inches)
Power consumption 80 W
Surround speakers 115 × 169 × 141 mm
Dimensions (w/h/d) (Approx.)
(4 1/2 × 6 5/8 × 5 1/2
270 × 331 × 380 mm
inches)
(10 5/8 × 13 × 15 inches)
Mass (Approx.)
Mass (Approx.) 8.3 kg (18 lb 5 oz)
Front speakers 1.4 kg (3 lb 2 oz)
Center speaker 1.3 kg (2 lb 14 oz)
Surround speakers 1.0 kg (2 lb 4 oz)

80US

Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Monaural audio cord (1)
Speaker cords
• Long (2)
• Short (3)
Coaxial digital cord (1)
Footpads
• Speakers (20)
• Sub woofer (4)
Remote commander RM-AAP012 (1)
R6 (size-AA) batteries (2)
Optimizer microphone ECM-AC2 (1)
Speakers
• Front speakers (2)
• Center speaker (1)
• Surround speakers (2)
• Sub woofer (1)

For details on the area code of the

component you are using, see page 3.

Design and specifications are subject to

change without notice.

Additional Information

81US

HT-8000MH
2-662-265-11 (1)
C:\Documents and masterpage: Left
Settings\pc13\Desktop\J9052007_2662265111HT7000DH_US\2662265111\US01COV_HT-
7000DH-UIX.fm
US01COV_HT-7000DH-U.book Page 82 Wednesday, January 25, 2006 3:30 PM

Index
Numerics M T
2 channel 52 MD deck Tape deck
2CH STEREO 52 connecting 18 connecting 18
5.1 channel 14 Menu TEST TONE 34
A. CAL 48 Tuner
A AUDIO 44 connecting 28
AUTO CALIBRATION 31 LEVEL 42 Tuning
AUTO FORMAT DIRECT SUR 43 automatically 54
(A.F.D.) 48 SYSTEM 46 to preset stations 56
TONE 43 TV
C TUNER 44 hooking up 21
CD player VIDEO 45
connecting 18 Muting 35 V
playback 37 VCR
COMPONENT VIDEO N hooking up 21
ASSIGN 64 Naming 56, 66 Video game
hooking up 21
D R
Digital Cinema Sound Recording X
(DCS) 51 onto a MiniDisc or audio XM Radio 57
Dolby Digital 72 tape 68
DTS 73 onto a recording media
DVD player 68
hooking up 21
playback 38 S
DVD recorder Satellite tuner
hooking up 21 hooking up 21
Selecting
E component 35
Error messages 78 sound field 50
speaker system 30
H Sleep Timer 67
HDMI Sound fields
ASSIGN 65 resetting 53
hooking up 21 selecting 50
Speakers
connecting 16
I installing 14
Initial setup 29
Super Audio CD player
INPUT MODE 64
connecting 18
playback 37

82US

HT-7000DH
2-662-265-11 (1)
C:\Documents and masterpage: Left
Settings\pc13\Desktop\J9052007_2662265111HT7000DH_US\2662265111\US01COV_HT-
7000DH-UIX.fm
US01COV_HT-7000DH-U.book Page 83 Wednesday, January 25, 2006 3:30 PM

HT-7000DH
2-662-265-11 (1)
lename[C:\Documents and
Settings\pc13\Desktop\J9052007_2662265111HT7000DH_US\2662265111\US08BKC_HT-7000DH-U.fm] masterpage:Left

US01COV_HT-7000DH-U.book Page 84 Wednesday, January 25, 2006 3:30 PM

Sony Corporation Printed in Malaysia

model name1[STR-DG500]
[2-662-265-11 (1)]

Manual Panasonic SC-HT540
No ratings yet
Manual Panasonic SC-HT540
48 pages
Sony LBT Xgr88
100% (1)
Sony LBT Xgr88
36 pages
Emaar DigiHomes Data
100% (1)
Emaar DigiHomes Data
3 pages
Sony Receiver HT6800DP
No ratings yet
Sony Receiver HT6800DP
56 pages
Sony Dav-Is10 Manual PDF
100% (1)
Sony Dav-Is10 Manual PDF
123 pages
Sony STR-DH800 User Manual
No ratings yet
Sony STR-DH800 User Manual
124 pages
Home Theatre System: HT-DDW790 HT-DDW685
No ratings yet
Home Theatre System: HT-DDW790 HT-DDW685
64 pages
Manual Home Theater Panasonic SC-HT680
No ratings yet
Manual Home Theater Panasonic SC-HT680
32 pages
Instruction Manual For JVC RX-884VBK
0% (1)
Instruction Manual For JVC RX-884VBK
59 pages
DHL fl5d, 7d
No ratings yet
DHL fl5d, 7d
76 pages
Multi Channel AV Receiver: STR-DG910
100% (1)
Multi Channel AV Receiver: STR-DG910
100 pages
Broadcast Production Lecture Note 1-2
100% (1)
Broadcast Production Lecture Note 1-2
4 pages
LG DVD User Manual
100% (1)
LG DVD User Manual
14 pages
7.integrals KCET PYQs
No ratings yet
7.integrals KCET PYQs
3 pages
Operating Instructions: SC-HT720 SC-HT692
No ratings yet
Operating Instructions: SC-HT720 SC-HT692
37 pages
Denon Avrx2800h Eu en
No ratings yet
Denon Avrx2800h Eu en
306 pages
TX-NR676 676E BAS ADV en 171219 Web 2022-11-02-205646 Retk
No ratings yet
TX-NR676 676E BAS ADV en 171219 Web 2022-11-02-205646 Retk
91 pages
FM Stereo FM-AM Receiver: STR-DE485
No ratings yet
FM Stereo FM-AM Receiver: STR-DE485
88 pages
HT303SU
No ratings yet
HT303SU
14 pages
5950 DP
No ratings yet
5950 DP
60 pages
PT798SBA: User'S Manual
No ratings yet
PT798SBA: User'S Manual
12 pages
Home Theatre System: Operating Instructions HT-DDW8500 HT-DDW7500
No ratings yet
Home Theatre System: Operating Instructions HT-DDW8500 HT-DDW7500
88 pages
DVD Home Theatre System: DAV-HDX500/HDX501W
No ratings yet
DVD Home Theatre System: DAV-HDX500/HDX501W
120 pages
Home Theater W0002715M
No ratings yet
Home Theater W0002715M
112 pages
PDF Archivo Rar
No ratings yet
PDF Archivo Rar
68 pages
Multi Channel AV Receiver: Operating Instructions STR-DH800
No ratings yet
Multi Channel AV Receiver: Operating Instructions STR-DH800
124 pages
Manual str1500 MU-TE-KI
No ratings yet
Manual str1500 MU-TE-KI
80 pages
Sony CDX-GT270MP Owner's Manual
No ratings yet
Sony CDX-GT270MP Owner's Manual
40 pages
Multi Channel AV Receiver: STR-DG500
No ratings yet
Multi Channel AV Receiver: STR-DG500
76 pages
W0010656M
No ratings yet
W0010656M
76 pages
Multi Channel AV Receiver: STR-DA1200ES
No ratings yet
Multi Channel AV Receiver: STR-DA1200ES
111 pages
Home Theater Sony-Str-K850p-Manual
No ratings yet
Home Theater Sony-Str-K850p-Manual
52 pages
W0010481M
No ratings yet
W0010481M
56 pages
Sony STR-DB798
No ratings yet
Sony STR-DB798
64 pages
Ht502th-Am - Ja8cllp Eng
No ratings yet
Ht502th-Am - Ja8cllp Eng
26 pages
FM Stereo FM/AM Receiver: STR-DA1000ES STR-DB790
No ratings yet
FM Stereo FM/AM Receiver: STR-DA1000ES STR-DB790
56 pages
HTDDW8600
No ratings yet
HTDDW8600
84 pages
FM Stereo FM/AM Receiver: STR-DE998
No ratings yet
FM Stereo FM/AM Receiver: STR-DE998
64 pages
Sony strdb1070
No ratings yet
Sony strdb1070
87 pages
Panasonic DVD Home Theatre Sound System Sa-Ht920
No ratings yet
Panasonic DVD Home Theatre Sound System Sa-Ht920
36 pages
Basic Manual: AV Receiver
No ratings yet
Basic Manual: AV Receiver
99 pages
HT302SD A8
No ratings yet
HT302SD A8
24 pages
DVD Home Theatre System
No ratings yet
DVD Home Theatre System
84 pages
Sony Amplifier PDF
No ratings yet
Sony Amplifier PDF
76 pages
Luke W Moody - Hybrid Documentary and Non-Binary Cinema-5-22
No ratings yet
Luke W Moody - Hybrid Documentary and Non-Binary Cinema-5-22
18 pages
AM312515 01 321 SeriesIIIandGS OG ENGvo
No ratings yet
AM312515 01 321 SeriesIIIandGS OG ENGvo
108 pages
HTDDW685-790 Om
No ratings yet
HTDDW685-790 Om
64 pages
Home Theatre System: HT-DDW870
No ratings yet
Home Theatre System: HT-DDW870
60 pages
SC HT995W
No ratings yet
SC HT995W
48 pages
Sony STRDG800 Operation Manual
No ratings yet
Sony STRDG800 Operation Manual
100 pages
HT 502 SH
No ratings yet
HT 502 SH
26 pages
DVD Home Theater Sound System Panasonic SCHT670
No ratings yet
DVD Home Theater Sound System Panasonic SCHT670
36 pages
Sony Mch-Nx3av Manual
No ratings yet
Sony Mch-Nx3av Manual
52 pages
Tense Exercise Key
0% (1)
Tense Exercise Key
5 pages
RTD250 Manual
No ratings yet
RTD250 Manual
55 pages
Mabual de Sony Home Theater
No ratings yet
Mabual de Sony Home Theater
44 pages
Home Theatre System: Operating Instructions HT-DDWG700
No ratings yet
Home Theatre System: Operating Instructions HT-DDWG700
56 pages
STRDB940 PDF
No ratings yet
STRDB940 PDF
64 pages
Ht302sd-d0 Na3nlld Eng 3951
No ratings yet
Ht302sd-d0 Na3nlld Eng 3951
14 pages
Manual Sony FST-ZX80D
No ratings yet
Manual Sony FST-ZX80D
0 pages
Sony Manual
No ratings yet
Sony Manual
0 pages
Watch Part 6 English CG - Married Demon Sealer Leilan - CG, Anime, KCCCC Porn - SpankBang
No ratings yet
Watch Part 6 English CG - Married Demon Sealer Leilan - CG, Anime, KCCCC Porn - SpankBang
1 page
KRYPTO The SUPERDOG (2005-2006) - Complete Animated TV Series, S01-S02 - 720p or 1080p Web-DL x264
No ratings yet
KRYPTO The SUPERDOG (2005-2006) - Complete Animated TV Series, S01-S02 - 720p or 1080p Web-DL x264
2 pages
Tikaram Jagannath Arts, Commerce & Science College Short Demand Outstanding Report
No ratings yet
Tikaram Jagannath Arts, Commerce & Science College Short Demand Outstanding Report
3 pages
Types of Media PPT 021013
No ratings yet
Types of Media PPT 021013
22 pages
Class IX-L-05 Worksheet 2015
No ratings yet
Class IX-L-05 Worksheet 2015
3 pages
Star India Internship
No ratings yet
Star India Internship
74 pages
CPS Viva
No ratings yet
CPS Viva
9 pages
Hajime No Ippo Chapter 15 - Manganelo
No ratings yet
Hajime No Ippo Chapter 15 - Manganelo
36 pages
Lament
No ratings yet
Lament
2 pages
Vaccination Details Tele
No ratings yet
Vaccination Details Tele
196 pages
Wild Palms 2 - The Floating World
No ratings yet
Wild Palms 2 - The Floating World
59 pages
Angelina Jolie
No ratings yet
Angelina Jolie
8 pages
What Do You Know About Love
No ratings yet
What Do You Know About Love
10 pages
Wa0016.
No ratings yet
Wa0016.
9 pages
GTPLKCBPLPackage
No ratings yet
GTPLKCBPLPackage
1 page
UNIT 07 TV Activity Worksheets-1-2
100% (1)
UNIT 07 TV Activity Worksheets-1-2
2 pages
Novo Documento de Texto
No ratings yet
Novo Documento de Texto
29 pages
Users - PEP - Colegio Adventista Libertad Sur 2022
No ratings yet
Users - PEP - Colegio Adventista Libertad Sur 2022
49 pages
Exercises Direct and Indirect Requests) : New Fast Book 02 Unit 04
No ratings yet
Exercises Direct and Indirect Requests) : New Fast Book 02 Unit 04
6 pages
Long Hot Summer
No ratings yet
Long Hot Summer
29 pages
The Civil Rights Movement
No ratings yet
The Civil Rights Movement
13 pages
Week 016-Module Motion Information and Media
No ratings yet
Week 016-Module Motion Information and Media
7 pages
BTH22 Medal Awardees
No ratings yet
BTH22 Medal Awardees
4 pages
Emma D'arcy - Google Search
No ratings yet
Emma D'arcy - Google Search
1 page
Rhea Rose Balaysoche: Grade 9 Robin
No ratings yet
Rhea Rose Balaysoche: Grade 9 Robin
3 pages
Zenith Television Receiver Operating Manual
From Everand
Zenith Television Receiver Operating Manual
Archive Classics
No ratings yet
Analog Dialogue Volume 46, Number 1: Analog Dialogue, #5
From Everand
Analog Dialogue Volume 46, Number 1: Analog Dialogue, #5
Analog Dialogue
5/5 (1)
Analog Dialogue, Volume 46, Number 3: Analog Dialogue, #7
From Everand
Analog Dialogue, Volume 46, Number 3: Analog Dialogue, #7
Analog Dialogue
No ratings yet
Analog Dialogue, Volume 45, Number 1
From Everand
Analog Dialogue, Volume 45, Number 1
Analog Dialogue
No ratings yet