Scribd
Upload
310 views3 pages

HYCOUNT3NPLUS

This document certifies the calibration of an automated hematology analyzer at Anonas Diagnostic laboratory. The calibration was performed by trained engineers from RTS Express using standard equipment traceable to SI units. Test results for temperature, voltages, and AC voltage were within specified ranges with small corrections noted. The analyzer was determined to be properly calibrated and the certificate is valid until January 2023.

Uploaded by

Teresita Alcaide
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
310 views3 pages

HYCOUNT3NPLUS

This document certifies the calibration of an automated hematology analyzer at Anonas Diagnostic laboratory. The calibration was performed by trained engineers from RTS Express using standard equipment traceable to SI units. Test results for temperature, voltages, and AC voltage were within specified ranges with small corrections noted. The analyzer was determined to be properly calibrated and the certificate is valid until January 2023.

Uploaded by

Teresita Alcaide
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Name of Laboratory : ANONAS DIAGNOSTIC

Address : ANONAS, STA MESA MANILA , METRO MANILA

NAME Automated hematology Analyzer MODEL HYCEL Hycount


3N

SERIAL NO. 0860318200463 DATE CALIBRATED 01-16-2023

This is to certify that the machine HYCEL HYCOUNT 3N PLUS HEMATOLOGY ANALYZER has undergone
Calibration and Regular Preventive Maintenance by the trained and certified Service Engineers of RTS
Express Import and Export through the use of following Standard/Reference Equipment traceable to SI
units as maintained by NMI through the accredited Calibration Laboratory

STANDARD/REFERENCE EQUIPMENT :

Type of Model/Serial Traceability with Calibration


Equipment/Calibration Number Calibration Certificate Due Date
Certificate Number Number

Digital Hycount Welltech Service 01-16-


Multimeter/EVL763951 3N/0860318200463 Corp/SC-P58141- 2023
J40681-T0041

CALIBRATION RESULT/S:

I.TERPERATURE

Area of Range Result 1 Result 2 Result 3 Correction


Measurement

Ambient 21.0 ± 4.0 °C 19 20 18 +2

II. Voltage Supply


A DC Voltage

Voltage Drop Range Result 1 Result 2 Result 3 Correction

+12 V + 11.5 ~ + 12.5 V +11.9 +12.1 +12.3 0.6

-12 V -12.5 ~+12.5 V -12.3 -12.1 -11.7 0.3

+24 V +23.5~+24.5 V +24.1 +23.9 +23.9 0.1

+5 V +4.7~+5.3 V +4.9 +5.2 +5.1 0.6

+3.3 V +3.25~+3.35. V +3.28 +3.24 +3.32 0.2

B. AC Volatge @60 Hz

Signal Input Range Result1 Result 2 Result 3 Correction

220 V 198~242V 204 232 239 5


REMARK/S:

1. The Measurement Uncertainties associates with the instrument calibrate is a 95% level of
confidence with coverage factor K=2
2. The Positive Correction is to be added to the test instrument indication and the Negative
Correction is subtracted to get the true value
3. The Calibration Test Parameters were selected as per indicate on the Standard Configuration of
the instrument and as per the end -user’s requirement
4. The calibration result gathered were obtain the time of performing such matter and pertains
only on the particular item for calibration. Any occurrence of inaccuracy on the results obtained
a after sudden modification on the unit or damaged occurred may lead to thr invalidation of thr
obtained at the time of calibration and should be recalibrated before the expiration of the
calibrate
5. This certificate should not be reproduced, except in full without the written approval of the
service provider. Counterfeiting or altering such details stated details hereto may lead to
INVALIDATION and VIODANCE of this document.

Performed by : Jerome Capellan Received by :


Service Engineer Staff of Duty

Approved By :
Aries Cris Dorado
Department Head, Engineer

You might also like