Pressure Switch POPREN - Rv00

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

DATA SHEET

PRESSURE SWITCH POPRENAxx / POPRENCxx


Description

The pressure switch is a monitoring device which sends and electrical signal to the fire control panel when
the pressure in the cylinder falls.
It is connected to the container valve and there are two variants NC (Normally closed, it opens with
pressure) or NO (normally open, it closes with pressure). Inside of this device is housed a dry contact which
opens or closes an electrical circuit depending on the variant mentioned above. They are supplied from the
factory assembled in the container valve in the proper port. The container valves in their connection for the
pressure switch have a non-return mechanism which allows the pressure switch to be changed or removed
with the cylinder pressurized.

Height: 3.35 in (85 mm)


Option 2
Option 1 IP67
IP54 CAP+ Flying leads + connector

Technical information

PRESSURE SWITCH POPRENAXX / POPRENCXX


POPRENA20 145-290 psi (10-20 bar)
N.O. POPRENA50 290-725 psi (20-50 bar)
Regulation field
POPRENA80 725-1160 psi (50-80 bar)
for HFC-227ea:
POPRENC20 145-290 psi (10-20 bar)
N.C. POPRENC50 145-725 psi (10-50 bar)
POPRENC80 725-1160 psi (50-80 bar)
POPRENA150 725-2175 psi (50-150 bar)
N.O. POPRENA250 1450-3625 psi (100-250 bar)
Regulation field
POPRENA300 725-4350 psi (50-300 bar)
for Inert gases:
POPRENC150 725-2175 psi (50-150 bar)
(Pilot cylinders)
N.C. POPRENC250 1450-3625 psi (100-250 bar)
POPRENC300 750-4350 psi (50-300 bar)
Valve connection 1/8” NPT
Electrical terminals Faston
Maximum voltage 48 V
Inductive current 0.2 A
Resistant current 0.5 A
Protection index options
Option 1 IP 54
Option 2 IP 67
Mechanical life 106 cicles
Contact type NO / NC
Approvals UL-EX27139

WARNING: This type of pressure switch POPRENAxx / POPRENCxx, is manufactured and approved to be used in fixed extinguishing installations with
FM-200®. This product is not designed for other use or purpose. If product user has any doubt regarding the application or product use, please contact
+34 947 28 11 08. Every not approved use or application or / and any other not approved modification of the product or its function may cause serious
accidents or / and personal damages. RG SYSTEMS S.L. is not responsable for any non-approved use of the application.

IMPORTANT: RG SYSTEMS S.L. reserves the right to change or modify without previous notice any data or specification due to changes or modification
in order to improve the products presented.

FM-200® is a registered Trademark of DuPont used under license by RG SYSTEMS S.L.

PRESSURE SWITCH POPRENxxx 1/1

You might also like