Technical Report: (7620) 350-0024: Consumer Products Services Division

CONSUMER PRODUCTS SERVICES DIVISION
Technical Report: (7620)350-0024 Date of Issue: January 22, 2021

Date Received: December 16 , 2020 Page 1 of 4
EDGAR EDUARDO
INDUSTRIAS PLASTICAS INTERNACIONALES S.A. DE C.V. ATTN:
CARBAJAL ALEGRIA
MONTE ELBRUZ 132 702 CC: /
CHAPULTEPEC MORALES, CIUDAD DE MÉXICO
OVERALL RATING PASS
Sample Description: IPIDUREX PELICULA DE PVC

Manufacturer: N/A Lot #:
Buyer: N/A SKU / Style #: N/A
Country of Origin: N/A Country of Destination: N/A
Color: N/A Item #: N/A
Re-test: Yes: No: Charge Vendor: Yes: No:
Previous Report No.: N/A
This report is governed by, and incorporates by reference, CPS Conditions of Service as posted at the date of issuance of this report
at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use.
Bureau Veritas Consumer Products Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our
Services Mexico S.A. de C.V. prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set
forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or
Circuito del Sol 3905-1 Col. Nuevo any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the
Amanecer Puebla Mexico, 72400 results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for
Phone / Fax 52 01 222 2660561 accredited tests. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our
negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall speci fically
website: www.cps.bureauveritas.com address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute you unqualified acceptance
of the completeness of this report, the tests conducted and the correctness of the report contents.
Technical Report: (7620)350-0024
Date of Issue: January 22, 2021
Page 2 of 4
EXECUTIVE SUMMARY:
The sample(s) MEETS the following requirement(s):
Tests required Rating Comments / Remarks
SPECIFIC MIGRATION OF HEAVY METALS FOR

PASS See Attached Table 1
PLASTIC MATERIALS IN CONTACT WITH FOODSTUFFS*
The results of the tests performed are presented in the next section evaluated as DATA:
Tests required Rating Comments / Remarks
WATER VAPOR TRANSMISSION RATE* DATA See Attached Table 2
* “Bureau Veritas CPS Mexico used an approved subcontractor for this evaluation, the client was notified about this
procedure and obtained the client´s written approval”
GENERAL SIGNATURES Bureau Veritas Consumer Product Services

INFORMATIONOLGA HERNANDEZ
2222660561 EXT.0097
[email protected]
JUAN FELIPE MARTÍNEZ LEÓN

Hardlines OPS Manager - Bureau Veritas CPS Mexico
Page 3 of 4
RESULTS:
1) SPECIFIC MIGRATION OF HEAVY METALS FOR PLASTIC MATERIALS IN CONTACT WITH FOODSTUFFS –
COMMISSION REGULATION (EU) NO. 10/2011 AND ITS AMENDMENTS
Test Condition: 3% Acetic acid: 40 oC, 10 days

Result Maximum
Parameter Simulant Used Unit
1 Allowable Limit
Food contact surface area - dm2 1.00 -
Volume of simulant used - mL 167 -
Aluminum (Al) 3% Acetic acid mg/kg <0.1 1
Barium (Ba) 3% Acetic acid mg/kg <0.1 1
Cobalt (Co) 3% Acetic acid mg/kg <0.01 0.05
Copper (Cu) 3% Acetic acid mg/kg <0.5 5
Iron (Fe) 3% Acetic acid mg/kg <5 48
Lithium (Li) 3% Acetic acid mg/kg <0.1 0.6
Manganese (Mn) 3% Acetic acid mg/kg <0.1 0.6
Zinc (Zn) 3% Acetic acid mg/kg <3 5
Nickel (Ni) 3% Acetic acid mg/kg <0.01 0.02
Antimony (Sb) 3% Acetic acid mg/kg <0.01 0.04
Europium (Eu) 3% Acetic acid mg/kg <0.01 0.05
Gadolinium (Gd) 3% Acetic acid mg/kg <0.01 0.05
Lanthanum (La) 3% Acetic acid mg/kg <0.01 0.05
Terbium (Tb) 3% Acetic acid mg/kg <0.01 0.05
Sum of Europium (Eu),
Gadolinium (Gd), Lanthanum 3% Acetic acid mg/kg <0.01 0.05
(La), and Terbium (Tb)
Arsenic (As) 3% Acetic acid mg/kg <0.01 ND
Cadmium (Cd) 3% Acetic acid mg/kg <0.002 ND (0.002)
Chromium (Cr) 3% Acetic acid mg/kg <0.01 ND
Lead (Pb) 3% Acetic acid mg/kg <0.01 ND
Mercury (Hg) 3% Acetic acid mg/kg <0.01 ND
Conclusion - - PASS -
Test Item 1: Transparent plastic (film, PVC)
Note: “<” = less than

mg/kg = milligram per kilogram
Method: EN 13130-1: 2004 and analysis by Inductively Coupled Argon Plasma Spectrometer (ICP).
Remark: 1) The migration test is carried out according to EC Regulation No. 10/2011 and the corresponding regulatory
statutes.
2) For article intended for single use, only single determination is carried out in the migration tests and the test
result is shown in result table.
3) Selected test was specified by client.
Page 4 of 4
2) WATER VAPOR TRANSMISSION RATE – ASTM F1249
Test Conditions
Test Gas Water Vapor Test Temperature 37.8 °C 100.0 °F

Test Gas Concentration 90% RH Carrier Gas 100% N2, Dry
Water Vapor
Transmission Rate Steady State or Test
Sample Description Rating
2 Duration*
Replicate g/(m .day)
IPIDUREX PELICULA DE A 34.6 Steady State DATA

PVC B 34.1 Steady State DATA
NOTE: Above sample was analyzed on a Permatran-W Water Vapor Permeability Instrument, following the testing
procedure written within QMS 702-004. *If Steady State has not been reached, then the transient data point (normally at
120 hours unless additional time has been purchased) will be reported. To convert the above results to 100 in 2/day,
divide the above values by 15.5. The results relate only to the specific items tested.

Technical Report: (7620) 350-0024: Consumer Products Services Division

Uploaded by

Copyright:

Available Formats

Technical Report: (7620) 350-0024: Consumer Products Services Division

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Technical Report: (7620) 350-0024: Consumer Products Services Division

Uploaded by

Copyright:

Available Formats

CONSUMER PRODUCTS SERVICES DIVISION

Technical Report: (7620)350-0024 Date of Issue: January 22, 2021

OVERALL RATING PASS

Sample Description: IPIDUREX PELICULA DE PVC

The sample(s) MEETS the following requirement(s):

Tests required Rating Comments / Remarks

SPECIFIC MIGRATION OF HEAVY METALS FOR

Tests required Rating Comments / Remarks

WATER VAPOR TRANSMISSION RATE* DATA See Attached Table 2

GENERAL SIGNATURES Bureau Veritas Consumer Product Services

JUAN FELIPE MARTÍNEZ LEÓN

Test Condition: 3% Acetic acid: 40 oC, 10 days

Test Item 1: Transparent plastic (film, PVC)

Note: “<” = less than

2) WATER VAPOR TRANSMISSION RATE – ASTM F1249

Test Gas Water Vapor Test Temperature 37.8 °C 100.0 °F

IPIDUREX PELICULA DE A 34.6 Steady State DATA

You might also like