SCS 24VDC P1SIL3DS en 230416 103510

Download as pdf or txt
Download as pdf or txt
You are on page 1of 6

 

Data sheet
SCS 24VDC P1SIL3DS Weidmüller Interfaces GmbH & Co. KG

Postfach 3030

32760 Detmold

Tel.    +49 5231 14-0


 

Fax.    +49 5231 14-2083


 
[email protected]

www.weidmueller.com

This safety relay is used in areas of process automation


that require a functionally safe switch-off. The module
meets the requirements for SIL3 according to EN 61508.
• Variant without monitoring circuit
• TUV certified and with “Approved Safety Function”
• cULus certified
• Optional compatible with Triconex® output modules
Tricon™, Trident™, and Tri-GP™
• Multi-voltage input (24 - 230 V UC) in the monitoring
circuit
• Externally accessible fuse

General ordering data


 
Version SAFESERIES, Safety relay,24 V DC ± 20%, 35
mA , Max. switching current, internal fuse : 5 A
(refer to derating curve), SIL 3, EN 61508:2010
Order No. 1303890000
Type SCS 24VDC P1SIL3DS
GTIN (EAN) 4050118102697
Qty.
 
1 pc(s).

Creation date April 16, 2023 4:01:21 AM CEST


 

  Catalogue status 31.03.2023 / We reserve the right to make technical changes. 1


 
Data sheet
SCS 24VDC P1SIL3DS Weidmüller Interfaces GmbH & Co. KG

Postfach 3030

32760 Detmold

 
Technical data Tel.    +49 5231 14-0

Fax.    +49 5231 14-2083


Dimensions and weights
[email protected]
 
Depth 114.1 mm   Depth (inches) 4.492 inch
www.weidmueller.com
Height 117.3 mm   Height (inches) 4.618 inch
Width 22.5 mm   Width (inches) 0.886 inch
Net weight 177 g    
 

Temperatures
 
Storage temperature -40 °C...85 °C   Operating temperature -25 °C...50 °C
Operating temperature, min. -25 °C   Operating temperature, max. 50 °C
Humidity 40 °C / 93 % rel. humidity,    
 
no condensation

Input (safety circuit)


 
Connection designation (safety circuit) A1, A2   Rated control voltage 24 V DC ± 20%
Current consumption   Guaranteed current consumption of 24
42 mA VDC -10% 35 mA
Inrush current ≤170 mA   Status indicator LED yellow
Protective circuit Reverse polarity protection,    
 
Free-wheeling diode

Output (safety circuit)


 
Connection designation (safety output)   Contact design 1 x de-energised to safe
13, 14, 15 (NO contact)
Contact base material AgNi 0.15 gold flashed   Max. permitted switching voltage 250 V AC / 30 V DC
Max. permitted switching current   Max. switching current, internal fuse 5 A (refer to derating
5A curve)
Max. switching current, external fuse 5 A (refer to derating   Max. switching capacity
curve) 1250 VA
Internal fuse 5 A time-lag   External back-up fuse 5 A time-lag
Short circuit resistance No   Switch-on time typ. 7 ms
Switch-off time typ. 14 ms   Min. switching capacity 10 mA @ 12 V
 

Safety-related basic specifications


 
Device type A   Tproof 12 Years
Hardware fault tolerance (HFT) 2   Safety category SIL 3
Safety standard EN 61508:2010    
 

General data
 
Operating altitude ≤ 2000 m, above sea level   Rail TS 35
Colour   Noxious gas resistance to EN Yes (art. No.:
 
black, yellow 60068-2-60 1304040000 only)

Insulation coordination
 
Rated voltage 300 V   Pollution severity 2
Surge voltage category   Clearance and creepage distances for
III control side - load side ≥ 5.5 mm
Dielectric strength for control side - load   Dielectric strength to mounting rail
side 4 kVeff / 1 min 4 kVeff / 1 Min.
Impulse withstand voltage 6 kV (1.2/50 µs)   Protection degree IP20
 

Creation date April 16, 2023 4:01:21 AM CEST


 

  Catalogue status 31.03.2023 / We reserve the right to make technical changes. 2


 
Data sheet
SCS 24VDC P1SIL3DS Weidmüller Interfaces GmbH & Co. KG

Postfach 3030

32760 Detmold

 
Technical data Tel.    +49 5231 14-0

Fax.    +49 5231 14-2083


Further details of approvals / standards
[email protected]
 
Standards
 
EN 61000, EN 61326-3-2   Certificate no. (cULus) E223474
www.weidmueller.com

Connection data
 
Wire connection method Screw connection   Stripping length, rated connection 8 mm
Tightening torque, min. 0.4 Nm   Tightening torque, max. 0.6 Nm
Clamping range, rated connection 1.5 mm²   Clamping range, min. 0.13 mm²
Clamping range, max.   Wire connection cross section AWG,
2.5 mm² min. AWG 26
Wire connection cross section AWG,   Wire cross-section, solid, min.
max. AWG 12 0.2 mm²
Wire cross-section, solid, max.   Wire connection cross section, finely
2.5 mm² stranded, min. 0.2 mm²
Wire connection cross section, finely   Wire connection cross-section, finely
stranded, max. stranded with wire-end ferrules DIN
2.5 mm² 46228/4, min. 0.2 mm²
Wire connection cross-section, finely   Conductor cross-section, flexible, AEH
stranded with wire-end ferrules DIN (DIN 46228-1), min.
46228/4, max. 2.5 mm² 0.2 mm²
Conductor cross-section, flexible, AEH   Blade size
(DIN 46228-1), max.
 
2.5 mm² size PH0

Classifications
 
ETIM 6.0 EC001449   ETIM 7.0 EC001449
ETIM 8.0 EC001449   ECLASS 9.0 27-37-18-19
ECLASS 9.1 27-37-18-19   ECLASS 10.0 27-37-18-19
ECLASS 11.0 27-37-18-19   ECLASS 12.0 27-37-18-19
 

Environmental Product Compliance


 
REACH SVHC Lead 7439-92-1
SCIP
 
807f1906-ce90-4f93-8801-4b128b343e6b

Approvals
 
Approvals

ROHS Conform
UL File Number Search UL Website
Certificate no. (cULus)
 
E223474

Downloads
 
Approval/Certificate/Document of TÜV Safety Approved certificate
Conformity EU Konformitätserklärung / EU Declaration of Conformity
Engineering Data CAD data -- STEP
Engineering Data WSCAD
User Documentation Beipackzettel / Package Insert - multilingual
Safety manual - English
Sicherheitshandbuch - Deutsch
Catalogues Catalogues in PDF-format
Brochures
 

Creation date April 16, 2023 4:01:21 AM CEST


 

  Catalogue status 31.03.2023 / We reserve the right to make technical changes. 3


 
Data sheet
SCS 24VDC P1SIL3DS Weidmüller Interfaces GmbH & Co. KG

Postfach 3030

32760 Detmold

 
Drawings Tel.    +49 5231 14-0

Fax.    +49 5231 14-2083

Wiring diagram Derating curve [email protected]

www.weidmueller.com

DC load limit curve Dimensioned drawing

Creation date April 16, 2023 4:01:22 AM CEST


 

  Catalogue status 31.03.2023 / We reserve the right to make technical changes. 4


 
Data sheet
SCS 24VDC P1SIL3DS Weidmüller Interfaces GmbH & Co. KG

Postfach 3030

32760 Detmold

 
Drawings Tel.    +49 5231 14-0

Fax.    +49 5231 14-2083

[email protected]

www.weidmueller.com

Miscellaneous

Type codes

Creation date April 16, 2023 4:01:22 AM CEST


 

  Catalogue status 31.03.2023 / We reserve the right to make technical changes. 5

You might also like