Product page >

General Availability Data Sheet

SecFlow-1v
Ruggedized Multiservice Gateway

• Enhanced security capabilities: stateful firewall, VPNs, technicians or sensors, saving

automated PKI the need for wired
connection or multiple costly
• Resilient HSPA+/LTE cellular network uplink for cellular connections from
maximum service continuity and built-in GNSS for each device.
location reporting When equipped with
• Reduced OPEX with secure Zero Touch provisioning LoRaWAN radio, SecFlow-1v
aggregates multiple low-power low-bandwidth sensors/meters
• Hosting of third-party software for customized deployed over a wide area. This provides an ideal solution for
applications (edge computing) rural and other non-dense areas saving CAPEX and OPEX.
• SCADA protocol gateway for IEC-101, IEC-104, Modbus- The gateway is designed for installation under harsh
RTU/TCP, and DNP3 protocols environmental conditions. It features DIN-rail mount, IP30
protection level, wide operating temperature range (-40°C to
• Option for second cellular modem, WiFi, or LoRaWAN 75°C) without fans, and EMI immunity (IEC 61850-3, IEEE 1613
and EN 50121-4).
• Embedded, isolated DC power supply
SecFlow-1v supports several powering options that all use an
• Enhanced EMI and immunity according to IEC 61850-3, embedded isolated DC power supply, to meet the harsh
IEEE 1613*, EN 50121-4 environmental requirements.
• Certified for use in AT&T, T-Mobile and Verizon wireless
networks MARKET SEGMENTS AND APPLICATIONS
SecFlow®­1v is a multiservice gateway optimized for industrial IoT SecFlow-1v addresses Industrial IoT, for example:
and other mission-critical applications, a member of RAD’s • Distributed automation in secondary substations
SecFlow suite of ruggedized Ethernet products. • Smart meter and sensors concentration
In addition to its communication capabilities, SecFlow-1v is an • Water resources management
open platform suitable for quick introduction of new capabilities, • Industry 4.0
by hosting third-party software, using Linux containers.
• Smart and safe cities
SecFlow-1v features four GbE Copper ports with PoE options and • Out-of-band management using cellular uplink
one GbE SFP port, two serial RS-232 ports or one RS-232 and one
• Smart retail
RS-485/2W port, and a cellular modem with two SIM cards for
maximum link resiliency.
INTEROPERABILITY
SecFlow-1v is equipped with serial interfaces for connectivity of
legacy RTUs with new IP-based IED systems. SecFlow-1v gateway SecFlow-1v operates with RAD SecurityGateway, SecFlow-1,
converts legacy IEC-101 protocol to IP-based IEC-104, SecFlow-2, and with third party VPN aggregators.
Modbus-RTU to Modbus/TCP and encapsulated DNP3 serial to
DNP over IP, enabling seamless communication from IP SCADA * This feature will be released in a future version.
to both old and new RTUs. This provides a single box solution for
multi-service applications and smooth migration to all-IP
networks.
In addition to its cellular uplink that provides wireless connection
towards the network, thanks to its modular architecture
SecFlow-1v can be equipped with additional wireless
technologies. When equipped with WiFi, SecFlow-1v acts as an
access point, aggregating several users, such as on-site
 Data Sheet
SecFlow-1v
Ruggedized Multiservice Gateway

ROUTER AND VPN SERVICES MANAGEMENT AND SECURITY

SecFlow-1v features static routing, RIPv2, OSPF, BGP, VRF and The device can be managed via the SecFlow web-based interface
NAT/NAT-Traversal. (HTTP/HTTPS).
The device features a VPN gateway with two operation modes: For easy and safe deployment, RAD offers Zero Touch
• Inter-site connectivity using IPsec or Open VPN tunnels provisioning thus reducing OPEX and providing a simple way to
securely deploy thousands of elements in the network.
• Remote user access, using SSH
SecFlow-1v also supports a variety of access protocols, including
Inter-site VPN-based encrypted link ensures L3 transparent CLI and TFTP/SFTP.
connection of the Ethernet networks sites.
For remote access, the router uses an SSH-encrypted tunnel, Remote Terminal Unit/Programmable Logic Controller
with user authentication and specific access authorization. Ordering options with Programmable Logic Controller (PLC)
present an all-in-one-box solution from a single source for
LAYER-2 SWITCH distribution automation, industrial automation, building
SecFlow-1v provides local switching capabilities with and without automation, etc., supporting Modbus, DNP3, IEC-104 and
VLAN support, maintaining 2K MAC addresses and 16 broadcast BACnet SCADA masters. The devices can be programmed using:
domains (VLAN IDs). • Ladder logic in accordance with EC 61131-3
QoS: • Instruction List (IL)
• Ingress policer, egress shaper • Functional Block Diagram (FBD)
• Classification based on: Port, 802.1p, IPv4 DCSP • Sequential Function Chart (SFC)
• Scheduling • Structured Text (ST)
• Four priority queues SecFlow-1v devices with PLC module offer comprehensive cyber
• Strict and Weighted Round Robin (WRR) security relying on stateful firewall or SCADA firewall (optional),
VPNs such as IPsec and OpenVPN, automated PKI, as well as
RADview management with SIEM. Zero Touch provisioning
allows secure service activation and maintenance, with low
OPEX.

Remote
Access

Centralized Site Options

Remote Site

Public/Private Cloud
Serial Data Center
Mobile Microsoft
HQ
RTU
Network/App RADview Amazon
Server Portal
ETH
Goggle
Cloud
RTU PSN
FO
PoE
SecurityGateway/
SecFlow-1v 3r d party secure Hub
Camera

Figure 1. Industrial IoT Backhaul

2
 Data Sheet
SecFlow-1v
Ruggedized Multiservice Gateway

Specifications
LoRaWAN 433MHz/868MHz/915MHz/923MHz bands
CAPACITY Modem SX1301 base band processor emulating 49 x LoRa
demodulators, 10 parallel demodulation paths
Memory 1 GB RAM (unless otherwise specified)
8 uplinks channel and 1 downlink channel
2 x SX125x Tx/Rx front-ends high/low
ETHERNET INTERFACES
Tx power up to 25 dBm, Rx sensitivity down to -
Fiber 1 x 1000FX, SFP socket (see Ordering Options) 139 dBm @ SF12, BW 125 kHz
Copper 4 x 10/100/1000BASE-T UDP packet forwarder
PoE (optional) 2 x 30W, 4 x 15W, 1 x 60W* LoRaWAN Server As per specification v1.0.4
Max Frame Size 1.5 kB (optional)
WiFi Module IEEE 802.11ac/a/b/g/n
SERIAL INTERFACES Dual band 2.4GHz or 5GHz (software selectable)
Up to 8 users
Isolation Non-isolated/Isolated (for specific ordering options)
Serial 2 x RS-232 ports Table 1. Modem Frequency Bands
Interface 1 x RS-232 + 1 x RS-485 ports LTE Modem Category and Frequency Bands
Ordering
BRIDGE Code
L1 CAT 4 EMEA/Korea/Thailand
Compliance IEEE 802.1Q LTE FDD: B1/B3/B5/B7/B8/B20
Max. Number of 16 LTE TDD: B38/B40/B41
Concurrent VLANs WCDMA: B1/B5/B8
(Broadcast domains) GSM: B3/B8
MAC Address Table 2K L3 CAT 4 Australia/New Zealand/Taiwan/Brazil
LTE FDD: B1/B2/B3/B4/B5/B7/B8/B28
Operation Mode VLAN-aware learning bridge LTE TDD: B40
WCDMA: B1/B2/B5/B8
MODEMS GSM: B2/B3/B5/B8
L4 CAT 4 North America
Dual SIM Cellular LTE bands LTE FDD: B2/B4/B5/B12/B13/B14/B66/B71
Modem HSPA+/EVDO networks (technology backward WCDMA: B2/B4/B5
compatible) L4A CAT 6 North America, Anterix network 900MHz (B8)
UMTS/HSPA+ fallback LTE FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B20/B25/
B26/B29/B30
FOTA Firmware upgrade Over the Air TDD: B41
Configurable PAP, CHAP HSPA+: B1/B2/B3/B4/B5/B8
Cellular L4B CAT 7 North America, CBRS 3500MHz (B48)
Authentication LTE FDD: B2/B4/B5/B7/B12/B13/B14/B25/B26/B41/
Certification (L4) Verizon Wireless B42/B43/B48/B66/B71
HSPA+: B2/B4/B5
AT&T
L4C CAT 12 North America, CBRS 3500MHz (B48)
T-Mobile LTE FDD: B1/B2/B3/B4/B5/B7/B8/B9/B12/B13/B14/
PTCRB B18/B19/B20/B26/B29/B30/B32/B41/B42/B43/B46/B4
8/B66
SIM Card Mini SIM, 25 mm x 15 mm (0.98 in x 0.59 in
HSPA+: B1/B2/B4/B5/B6/B8/B9/B19
Form factor: 2FF
NETWORKING
VPN L3 mGRE DMVPN
L3 IPsec VPN
OpenVPN client
Gateway SCADA gateway for IEC101/104, Modbus RTU/TCP
and DNP3

3
 Data Sheet
SecFlow-1v
Ruggedized Multiservice Gateway

QUALITY OF SERVICE (QOS) Web GUI

Northbound Modbus, DNP3, IEC-104, BACnet
Policing Per port ingress policer, L1 rate, CIR
to SCADA
Egress Queues 4 queues per port Masters
Queue Mapping Per ingress port; P-bit mapping, DSCP mapping Masters Up to 5 concurrent masters
Scheduling Strict Priority / WRR Modbus TCP
Shaping Per port egress shaper, L1 rate, CIR DNP3 TCP or BACnet TCP
*This feature will be released in a future version. IEC-104
Additional I/O Up to 400
ROUTER Points Split between 2 Modbus-RTU
Protocols RIPv2, OSPFv2, BGP, VRF, IPv4, IPv6, NAT, NAT-T Slaves Up to 10 Modbus-TCP slaves
VRRP based on RFC 2338
Static routing MANAGEMENT
Control Port RS-232 interface, RJ45 connector
RTU/PLC DHCP DHCP client
Inputs 6 x digital inputs, max DC input voltage 24 VDC DHCP server for WiFi clients
6 x analog inputs as ordering options: Protocols TFTP/SFTP
• 0-5 VDC Web-based interface using HTTPS or HTTP
• 0-12 VDC Options CLI with password-protected access
• 0-24 VDC SMS commands
Outputs 6 x digital outputs: USB 2.0 host for software upload*
• relay-based ordering option: 3 pins;
SD memory card*
NO/COM/NC, 250 VAC/5A max, 400 VDC/5A
max
• solid state relay-based ordering option for
Class I/DIV 2 certified (Hazloc) devices: 2 pins;
*This feature will be released in a future version.
NO/COM, 100 VAC/100 mA max, 125 VDC/100
mA max

3G/LTE
Remote Site

Controlled
Device

Relay Output
CAT-M1/
BTS/eNB/
LTE
gNB Central Site

IP/TCP
Master

ETH Leased ETH

RTU ISP PSN
FO
Serial
SCADA
SecFlow-1v
RTU PLC

Digital/Analog Inputs

Sensor

Figure 2. Automation Gateway with PLC/RTU

4
 Data Sheet
SecFlow-1v
Ruggedized Multiservice Gateway

TIMING Environment
Timing Local time setting Storage -40 to 85°C (-40 to 185°F)
Temperature
SNTP
Operating Enclosure 1: -40 to 65°C (-40 to 149°F)
Temperature Enclosure 2: -40 to 75°C (-40 to 167°F) w/o PoE
SECURITY
-40 to 65°C (-40 to 149°F) with PoE
Firewall Stateful firewall
Enclosure 3: -40 to 60°C (-40 to 140°F)
Login Login lockout
Humidity Up to 90%
ACL ACL with MAC white list Note: The actual chassis and operating temperature depend on the
TACACS+ Multiuser TACACS+ ordering options.
IPsec AES128 and AES256 GCM encryption
Physical
PKI with X.509 certification
IKEv1, IKEv2, SHA2 Table 2.Dimensions and Weight
Interoperability with SCEP server 2012 and higher Enclosure 1 (E1) Enclosure 2 (E2) Enclosure 3 (E3)
Port-Based As per IEEE 802.1X-2100 Height 138 (5.43) 157.2 (6.19) 146 (5.74)
Network Port-based authorization mm (in)
Access Width 53.3 (2.1) 82.8 (3.25) 91.2 (3.59)
Control PEAP-MSCHAPv2. PEAP
EAP-TLS authentication methods Depth 123.3 (4.85) 150 (5.9) 132.6 (5.22)
(PNAC) Weight 0.88 kg (1.94 lb) 1.4 kg (3.1 lb) 1.6 kg (3.5 lb)

RESILIENCY Power

Routing Dynamic routing, OSPFv2, BGP Power Supply Embedded isolated power supply
Cellular ISP SIM cards backup or dual modem support 12V: 11–30 VDC
Redundancy 48V: 44–57 VDC (Dual power inlet)
IPsec VPN Policy-based WDC: 20–60 VDC (Dual power inlet)
Redundancy Route-based Power Enclosure 1: < 10 W
Consumption
Enclosure 2:
MONITORING
• Without PoE: 17W
GNSS GPS – American (default) • With PoE: 77W (17W regular + 60W PoE)
Galileo – European
Enclosure 3:
• Without PoE: 18W
DIAGNOSTICS
• With PoE: 78W (18W regular + 60W PoE)
Interface Per port
Counters
Syslog
SNMPv3 GET and traps
LEDs Including alarm indication
Dry Contacts 2-in and 2-out
SMS Status indication

GENERAL
Compliance Enhanced EMI and immunity according to
EN 50121-4
IEC 61850-3
IEEE 1613*
*This feature will be released in a future version.

5
 Data Sheet
SecFlow-1v
Ruggedized Multiservice Gateway

Ordering
LRx LoRaWAN Modem
Legend LR1 LoRaWAN modem with 8 channels and
SF-1V/Ex/@/R/#/$/%/Lx/*/Lx/&/LRx/PLC/^/!/**/CN frequency scheme according to EU433
Ex Chassis LR2 LoRaWAN modem with 8 channels and
E1 E1 enclosure frequency scheme according to EU868
E2 E2 enclosure LR3 LoRaWAN modem with 8 channels and
E3 E3 enclosure frequency scheme according to AU915
@ Power Supply LR4 LoRaWAN modem with 8 channels and
12V 12 VDC (11–30 VDC) frequency scheme according to US915
48V 48 VDC (44–57 VDC) LR6 LoRaWAN modem with 8 channels and
WDC Wide-range 20–60 VDC frequency scheme according to AS923
R Random-access memory (RAM) Note: The LoRaWAN modem is supplied with one antenna
2R 2GB matching the frequency ordered.
# Ethernet Ports PLC Programmable Logic Controller
4U1S 1 x 1000FX, 4 x 10/100/1000BASE-T ports PLC 6 digital inputs, 6 digital outputs, 6 analog
$ Power over Ethernet (PoE) inputs, 5 VDC
POE POE on 4 x 10/100/1000BASE-T PLC12 6 digital inputs, 6 digital outputs, 6 analog
2PA PoE on 2 x 10/100/1000BASE-T for RAD’s inputs, 12 VDC
Airmux (except for Airmux-5000D) and PLC24 6 digital inputs, 6 digital outputs, 6 analog
standard PoE for the remaining inputs, 24 VDC
2 x 10/100/1000BASE-T ports PLCGO Class I/DIV 2 certified (Hazloc) - 6 digital
% Serial Ports inputs, 6 digital outputs, 6 analog inputs
2RS 2 x RS-232 ports 5 VDC, solid-state relay-based
2RSM 1 x RS-232 port, 1 x RS-485 port PLCGO12 Class I/DIV 2 certified (Hazloc) - 6 digital
Lx Cellular Ports inputs, 6 digital outputs, 6 analog inputs
HSP HSPA+ (high-speed packet access) 12 VDC, solid-state relay-based
modem, 3.5 Gb PLCGO24 Class I/DIV 2 certified (Hazloc) - 6 digital
L1 LTE CAT-4 modem for Europe inputs, 6 digital outputs, 6 analog inputs
L3 LTE CAT-4 modem for Oceania and Latin 24 VDC, solid-state relay-based
America Note: PLC software is included upon ordering the /PLC ordering
L4 LTE CAT-4 modem for North America option.
L4A CAT 6 North America, certified for Anterix
network 900MHz (B8) ^ Ruggedized Options
L4B LTE-A CAT-7 modem for North America, RG IEC 61850-3 compliant
certified for CBRS private networks RL EN 50121-4 certified
L4C LTE-A CAT-12 modem for North America, GO Class I/DIV 2 certified
certified for CBRS private networks ! uCESP Container
Notes: CSP RS232 control signals (DTR and DCD) on S1
port managed by the uCESP container
• L1(3,4,4A,4B,4C) means that any of L1/L3/L4/4A/ ** Analog current loop ports with 4-20mA support
/4B/L4C options can be ordered. 3CL 3 ports
• In options with dual modems, both modems are of 6CL 6 ports
the same type (HSP, L1, L3, L4, L4A, L4B or L4C). CN LoRaWAN Container
• The cellular modem is supplied with two matching AP Actility LRR with enterprise TPE
antennas (see Supplied Accessories). OCP support (on premise Actility servers)
AS Actility LRR with enterprise TPE SAAS support
* GNSS
G Integrated GPS (tenant on Actility cloud servers)
Note: The GPS modem is supplied with one antenna (see AW
Supplied Accessories).
Actility LRR with Service providers TPW
support (Actility server for service providers)
& WiFi Interface
WF Wireless LAN AE Actility LRR for PoC with limited support of
Note: The WiFi modem is supplied with two matching antennas gateways and sensors
(see Supplied Accessories).

6
 Data Sheet
SecFlow-1v
Ruggedized Multiservice Gateway

RECOMMENDED CONFIGURATIONS SF-1V/E2/WDC/4U1S/2RS/L1(3,4,4A,4B,4C)/WF

SF-1V/E1/12V/4U1S/2RS/HSP SF-1V/E2/WDC/4U1S/2RS/HSP/WF

SF-1V/E1/12V/4U1S/2RS/HSP/G SF-1V/E2/WDC/4U1S/2RS/HSP/G/HSP

SF-1V/E1/12V/4U1S/2RS/L1(3,4,4A,4B,4C) SF-1V/E2/WDC/4U1S/2RS/L1(3,4,4A,4B,4C)/G/L1(3,4,4A,4B,4C)

SF-1V/E1/12V/4U1S/2RS/L1(3,4,4A,4B,4C)/G SF-1V/E2/WDC/4U1S/2RSM

SF-1V/E1/12V/4U1S/2RSM/HSP SF-1V/E3/48V/4U1S/POE/2RS/L1(3,4,4A,4B,4C)/PLC

SF-1V/E1/12V/4U1S/2RSM/L1(3,4,4A,4B,4C) SF-1V/E3/48V/4U1S/POE/2RSM/L1(3,4,4A,4B,4C)/PLC12

SF-1V/E1/WDC/4U1S SF-1V/E3/48V/4U1S/POE/2RSM/L1(3,4,4A,4B,4C)/PLC24

SF-1V/E1/WDC/4U1S/2RS/RL SF-1V/E3/WDC/2R/4U1S/2RS/L4/G/L4/PLC

SF-1V/E1/WDC/4U1S/2RS/HSP SF-1V/E3/WDC/2R/4U1S/2RS/L4/G/PLC

SF-1V/E1/WDC/4U1S/2RS/L1(3,4,4A,4B,4C) SF-1V/E1/12V/4U1S/2RS/L1(4)/G/RG

SF-1V/E2/12V/4U1S/2RS/HSP/G/WF SF-1V/E1/12V/4U1S/2RSM/L1(4)/G/RG

SF-1V/E2/12V/4U1S/2RS/HSP/G/HSP SF-1V/E1/WDC/4U1S/2RS/L1(L4)/G/RG

SF-1V/E2/12V/4U1S/2RS/L1(3,4,4A,4B,4C)/L1(3,4,4A,4B,4C) SF-1V/E1/WDC/4U1S/2RS/CSP*

SF-1V/E2/12V/4U1S/2RS/L1(3,4,4A,4B,4C)/G/L1(3,4,4A,4B,4C) SF-1V/E1/WDC/4U1S/2RS/L1/CSP*

SF-1V/E2/12V/4U1S/2RS/L1(3,4,4A,4B,4C)/G/WF SF-1V/E1/WDC/4U1S/2RSM/L1/G/RG

SF-1V/E2/12V/4U1S/2RS/L4/G/GO SF-1V/E2/WDC/4U1S/2RS/L1(3,4,4A,4B,4C)/RG

SF-1V/E2/12V/4U1S/2RSM SF-1V/E3/48V/4U1S/POE/2RSM/L1/G/PLC/3CL

SF-1V/E2/48V/4U1S/POE SF-1V/E3/48V/4U1S/POE/2RSM/L1/G/PLC/6CL

SF-1V/E2/48V/4U1S/POE/2RS SF-1V/E2/48V/4U1S/POE/2RSM/L1(3,4,4A,4B,4C)/G/LR4/AP

SF-1V/E2/48V/4U1S/POE/2RS/HSP SF-1V/E2/48V/4U1S/POE/2RSM/L1(3,4,4A,4B,4C)/G/LR4/AS

SF-1V/E2/48V/4U1S/POE/2RS/HSP/G/WF SF-1V/E2/48V/4U1S/POE/2RSM/L1(3,4,4A,4B,4C)/G/LR4/AW

SF-1V/E2/48V/4U1S/POE/2RS/L1(3,4,4A,4B,4C) SF-1V/E2/48V/4U1S/POE/2RSM/L1(3,4,4A,4B,4C)/G/LR4/AE

SF-1V/E2/48V/4U1S/POE/2RS/L1(3,4,4A,4B,4C)/L1(3,4,4A,4B,4C) SF-1V/E2/48V/4U1S/POE/2RS/L4B/G

SF-1V/E2/48V/4U1S/POE/2RS/L1(3,4,4A,4B,4C)/G/WF SF-1V/E2/48V/4U1S/POE/2RS/L4C/G

SF-1V/E2/48V/4U1S/POE/2RS/L1(3,4,4A,4B,4C)/G/L1(3,4) Please contact RAD Sales for more details on future products.

SF-1V/E2/48V/4U1S/POE/2RS/L1/G/LR1
SPECIAL CONFIGURATIONS
SF-1V/E2/48V/4U1S/POE/2RS/L1/G/LR2
SF-1V/E2/48V/4U1S/POE/2RS/L3/G/LR3 Zero Touch Provisioning
SF-1V/E2/48V/4U1S/POE/2RS/L3/G/LR6 PS-ZT-PRE_CONFIGURATION
One Zero Touch pre-configuration service package per each
SF-1V/E2/48V/4U1S/POE/2RS/L4/G/LR4
SecFlow-1v unit
SF-1V/E2/48V/4U1S/POE/2RSM/L1/G/LR2 and either of the following:
SF-1V/E3/WDC/4U1S/2RSM/L4/G/PLCGO PS-ZT-STAGING
SF-1V/E1/WDC/4U1S/2RSM/L4/G Local Zero Touch staging service package (one per project)
SF-1V/E2/48V/4U1S/POE/2RSM/L4/G/LR4 PS-ZT-ONSITE-STAGING
Onsite Zero Touch staging service package (one per project)
SF-1V/E3/48V/4U1S/POE/2RSM/L4/PLC
Please contact your local RAD partner for additional
SF-1V/E2/48V/4U1S/POE/2RS/L1(3,4,4A,4B,4C)/WF
configuration options.
SF-1V/E2/48V/4U1S/2PA/2RS
SF-1V/E2/WDC/4U1S
SF-1V/E2/WDC/4U1S/L1/WF
* This ordering option is part of RAD’s roadmap. Regarding
SF-1V/E2/WDC/4U1S/2PA/2RS/HSP availability, follow updates of official rollout and release
SF-1V/E2/WDC/4U1S/2PA/2RS/L1(3,4,4A,4B,4C) announcements.

7
 Data Sheet
SecFlow-1v
Ruggedized Multiservice Gateway

SF-24VDC-48VDC-240W
SUPPLIED ACCESSORIES 24 VDC to 48 VDC power supply, 240 W, -40 to 50°C (-40 to
122°F); 120 W at 65°C (149°F) and above
SF-ANT-GPS-PAS-3DBI-MAG/3M
GPS passive antenna, 3m, for options with integrated GPS SF-AC-12VDC-40W
SF-ANT-HSP-2DBI-SMA AC to 12 VDC power supply, 40 W, -20 to 60°C (-4 to 140°F);
HSP antenna, 2 dBi, for options with HSPA+ (high-speed packet 20 W at 65°C (149°F) and above
access) modem
Antennas
SF-ANT-LTE699-4DBI-SMA
LTE antenna, 4dBi, for options with LTEx modems SF-ANT3G-2M
Outdoor antenna for SecFlow 3G cellular modem, 2m connecting
SF-ANT-WIFI-DUALBAND-3DBI-SMA cable, 2.2 dBi, 824-894 MHz/900 MHz/1800 MHz/1900 MHz
WiFi dual band antenna, 3 dBi, for options with WiFi modem
SF-ANT3G-5M
SF-ANT-LoRA-3DBI-SMA Outdoor antenna for SecFlow 3G cellular modem, 5m connecting
LoRaWAN antenna, 3 dBi, for options with LoRaWAN modem cable, 2.2 dBi, 824-894 MHz/900 MHz/1800 MHz / 1900 MHz
Note: The LoRaWAN modem is supplied with one antenna SF-ANT4G-2M
matching the frequency ordered: EU433, EU868, AU915, US915, Outdoor antenna for SecFlow 4G cellular modem, 2m connecting
AS923. cable, 3 dBi, 699-960 MHz/1710-2170 MHz/2500-2690 MHz
SF-ANT4G-5M
OPTIONAL ACCESSORIES
Outdoor antenna for SecFlow 4G cellular modem, 5m connecting
CBL-RJ45/D9/F/6FT cable, 3 dBi, 699-960 MHz/1710-2170 MHz/2500-2690 MHz
Serial console and RS-232 data ports cable SF-ANT-LTE700-7DBI-MGNT
CBL-RJ45/D9/F/DM Outdoor magnetic base antenna for SecFlow-1v LTE options and
RJ45 to DB9 female shielded cable for /CSP option, 2m for LoRaWAN 868 and 915 MHz, 7 dBi
CBL-SF-RJ45-RS485 Transceivers
RS485 open-ended shielded cable
For the list of available transceivers, see the Pluggable
CBL-SERIAL-RJ45C-RJ45R Transceivers data sheet at www.rad.com
RAD to CISCO adapter cable
Note: It is strongly recommended to order this device with original RAD
RM-DIN-SINGLE SFPs installed. This will ensure that prior to shipping, RAD has performed
Rack Mount adaptor for single DIN RAIL device comprehensive functional quality tests on the entire assembled unit,
including the SFP devices. RAD cannot guarantee full compliance to
RM-DIN-19 product specifications for units using non-RAD SFPs.
19” Rack Mount adaptor for DIN RAIL device
USB holder kit
For SF-1V/E2/12V/4U1S/2RS/L4/G/GO ordering option

Power Supplies
SF-AC-48VDC-40W (to be used with non-POE options)
External DIN rail AC to 48 VDC power supply, 40 W, -20 to 60°C
(-4 to 140°F); 20 W at 60°C (140°F) and above
SF-AC-48VDC-120W
External DIN rail AC to 48 VDC power supply, 120 W, -20 to 60°C
(-4 to 140°F); 60 W at 65°C (149°F) and above

International Headquarters North American Headquarters

24 Raoul Wallenberg St., Tel Aviv 6971923, Israel 900 Corporate Drive, Mahwah, NJ 07430, USA
Tel 972-3-6458181 | Fax 972-3-7604732 Tel 201-529-1100 | Toll Free: 800-444-7234 | Fax: 201-529-5777
Email [email protected] Email [email protected]

www.rad.com
715-100-10/22 (2.3) Specifications are subject to change without prior notice. © 2018–2022 RAD Data Communications Ltd. The RAD name, logo, logotype, and the product
names Airmux, IPmux, MiNID, MiCLK, Optimux, and SecFlow are registered trademarks of RAD Data Communications Ltd. All other trademarks are the property of their
respective holders.