PARTS LIST NO.

50012504

LIST OF PARTS

FOR
Dosimat feeder

A2-60x3.15, RH Drive
HALONG 05-039710

Version : 1.0 Name: G.Anbu 27-SEP-05

 No. 50012504

Parts List
Explanation

This Parts List consists of pages in the following sequence:

A) General Information Section:

Cover - identifies the specific parts list number for a complete machine or modification to an existing one.
Explanation - provides explanation of parts list structure.
Information - identifies serial number, nameplates, manufacturing and shipping information.

B) Index Section:
General Assembly - identified general assembly drawing(s) associated with parts list.
00.00, Revision List - identifies parts list pages revised after initial release.
00.01, Section List - identifies all sections of the parts list, including index sections that are applicable.
00.02, Drawing List - identifies drawings necessary for the erection of equipment.
00.03, SPL List - identifies all Separate Parts Lists used within parts list.
00.04, Motor List - identifies motors applicable to this equipment.
00.05, Air and Water Requirements - identifies air and water requirements for this equipment.
00.06, Lubricants - identifies lubricants required for this equipment.
00.07, Supplied Spares - identifies spare components that are supplied with this equipment as part of the order.
00.08, Recommended Spare Parts - identifies spare parts recommended to be on hand for future use.
00.09, Instruments - identifies instruments applicable to this equipment.
00.10, Instructions - identifies instructions applicable to installation, operation and maintenance.

Not all index sections are used on all parts lists. Index sections that do not apply will be identified
as "NOT USED".

The following pages are the main element sheets with the actual contents of the parts list.

C) Elements Listing Section:

This part of the parts list specifies the position number, description, quantity, drawing numbers or Separate part
lists numbers, supply code, designation code, manufacture data, pattern number, material and weight. The element
sections may be assigned any identification number between 01.00 and 99.99.

Element List - specifies information in the following sequence.

Line Numbers - located in the left and right margins. These numbers are the "main key" to the parts list. Each
number identifies a line of the parts list and corresponds to the last two digits of the eight digit position number
shown on assembly drawings. The first two digits identify the section, the next two digits identify the sub-section,
the next two digits identify the sheet, and the last two digits identify the line number of the parts list.
Column 1: Description - provides a brief description of a component of the equipment.
Column 2: No. Req. - provides the quantity of a component needed for the equipment.
Column 3: Drawing - provides the drawing number or separate parts list number associated to the component
described.
Column 4: Code Dim. Manuf. (Pat) - provides the code for purchased parts, bolts, screws, fittings, etc. (see
7.000001) or designation of elements. The Dim provides numerical values which must be used corresponding
to dimensions on a tabulated standard part drawing. The Manuf. specifies commercially available elements
according to a specific trade name and model. The (Pat) identifies the pattern number for an element.
Column 5: Mat. Code - states a material code of the material to be used for the element. The code refers to a
material data sheet in the F.L.Smidth material list. Alternatively a specific material specification may be included
on the drawing. If the two codes or specifications are different, this parts list specification shall be used.
Column 6: Total - indicates total weight for the quantity of components listed. The weight is rounded up to a whole
number.

All units of measure are in millimeters (mm) unless specified otherwise.

 No. 50012504

Information Concerning
MANUFACTURE and SHIPMENT

"Number Required" applies to one machine only Weight of complete machine 2425 kg

INSTRUCTION MANUALS
"Mat." Code refers to F.L.Smidth Standard for manufacture and shipment designations
material specifications unless noted otherwise.
No.
SPECIAL TOOLS for manufacture 520530 General workshop instruction

Drawing No. Used for drawing No. 12951 Packing

19691 Shipment

50.100.000 Equipment identification marking

37701-24 Erection, Operation and maintenance

33631-04 Shrink connection f.planetary gear

3.207468 Painting program

V3131-08 Chain manufacture

33501-04 Tensioning element

Nameplates, to be attached to machine

To be stamped
Serial Number Quantity Machine Type and Size To be placed on
30000584, Mark 1 See the main arrangement (00.02.01.01)
CE-4 0
20001047,Mark I 1 Parts list: 50012504 See the main arrangement (00.02.01.01)

The explanatory text for the purchase part code number (consisting of four digits + dimension) is included in the document:
"Code for Purchase Parts" No. 7.000001.

x) in a column on parts list sheets indicates that there is a pertinent remark at the foot of the sheet.

Open dimensions are specified on a drawing as a variable letter dimension. Specific order dimensions are contained in the parts list
dimension column.

DO NOT USE ANY PREVIOUSLY RECEIVED DOCUMENT, USE ONLY THE DOCUMENT RECEIVED WITH THE ORDER.
 Dosimat feeder 50012504
No. Section: 00.00
A2-60x3.15, RH Drive
Product code 000 Sheet no: 01
Revision list
Section number
Description and sheet number Revision number & revision date
01 MANUFACTURE AND SHIPMENT INFO. 1 01
27-SEP-05

02 02

03 03

04 04

05 05

06 06

07 07

08 08

09 09

10 10

11 11

12 12

13 13

14 14

15 15

16 16

17 17

18 18

19 19

20 20

21 21

22 22

23 23

24 24

25 25

26 26

27 27
Sign GAN Date 27-SEP-05
 Dosimat feeder No. 50012504 Section: 00.01
A2-60x3.15, RH Drive
Product code Sheet no: 01
Section list 000
Section Number of Section
Description number sheets Weight kg Release date

01 Revision list 00.00 1 27-SEP-05 01

02 Section list 00.01 1 - 2 27-SEP-05 02

03 Drawing list 00.02 1 27-SEP-05 03

04 Spl list 00.03 NOT USED 27-SEP-05 04

05 Motor list 00.04 NOT USED 27-SEP-05

05

06 Air and water requirements 00.05 NOT USED 27-SEP-05

06

07 Lubricants 00.06 NOT USED 27-SEP-05

07

08 Supplied spares 00.07 NOT USED 27-SEP-05

08

09 Recommended spare parts 00.08 NOT USED 27-SEP-05

09
10 Instruments 00.09 NOT USED 27-SEP-05
10
11 Instructions 00.10 NOT USED 27-SEP-05
11
12 General arrangement x) 27-SEP-05
12
Inlet 01.01 1 201 27-SEP-05
13 13
Suspension 02.01 1 50 27-SEP-05
14 14
Frame 03.01 1 359 27-SEP-05
15 15
Apron belt 04.01 1 436 27-SEP-05
16 16
Stationary shaft 05.01 1 162 27-SEP-05
17 17
Drive shaft 06.01 1 143 27-SEP-05
18 18
Roller chain, m112 07.01 1 247 27-SEP-05
19 19
Load cell arrangement 08.01 1 - 2 51 27-SEP-05
20 20
Chain lubrication system 09.01 1 - 2 17 27-SEP-05
21 21
Drive unit 10.01 1 135 27-SEP-05
22 22
Screening 11.01 1 98 27-SEP-05
23 23
X) in SUPPLY denotes split supply Original 27-SEP-05 GAN

12: SEE POSITION 00.02.01.01 FOR GENERAL ARRANGEMENT

Rev. Line Date Sign

 Dosimat feeder No. 50012504 Section: 00.01
A2-60x3.15, RH Drive
Product code Sheet no: 02
Section list 000
Section Number of Section
Description number sheets Weight kg Release date

01 Rod gate 12.01 1 275 27-SEP-05 01

02 Discharge casing 13.01 1 - 2 211 27-SEP-05 02

03 Apron belt scraper 14.01 1 - 2 38 27-SEP-05 03

04 Chain scraper 15.01 1 27-SEP-05 04

05 Tools 16.01 1 2 27-SEP-05

05

06 06

07 07

08 08

09 09
10 10
11 11
12 12
13 13
14 14
15 15
16 16
17 17
18 18
19 19
20 20
21 21
22 22
23 23
X) in SUPPLY denotes split supply Original 27-SEP-05 GAN

12: SEE POSITION 00.02.01.01 FOR GENERAL ARRANGEMENT

Rev. Line Date Sign

 Dosimat feeder No. 50012504 Section: 00.02
A2-60x3.15, RH Drive
Drawing list Product code 000 Sheet no: 01

Description Drawing Remarks

Main Arrangement 10050985
01 01
Assembly drawing 2.207197 07.01.01.01
02 02
Assembly drawing 1.207186 01.01.01.01
03 03
Assembly drawing 1.207207 09.01.01.01
04 04
Assembly drawing 1.207685 08.01.01.01
05 05
Assembly drawing 1.216352 10.01.01.01
06 06
Assembly drawing 10051503 11.01.01.01
07 07
Assembly drawing 2.207107 04.01.01.01
08 08
Assembly drawing 2.207171 05.01.01.01
09 09
Assembly drawing 2.207180 06.01.01.01
10 10
Assembly drawing 2.207216 02.01.01.01
11 11
Assembly drawing 2.207240 14.01.01.01
12 12
Assembly drawing 20017404 13.01.01.01
13 13
Assembly drawing 20019827 03.01.01.01
14 14
Assembly Drawing 3.207184 12.01.01.01
15 15

16 16

17 17

18 18

19 19

20 20

21 21

22 22

23 23
Original 27-SEP-05 GAN

Rev. Line Date Sign

 Dosimat feeder No. 50012504 Section: 01.01
A2-60x3.15, RH Drive
Product code 000 Sheet no. 01
Inlet
No. Drawing Mat Total
Description Req. Product No. Code Dim. Manuf. (Pat) code wgt kg

Assembly drawing 1.207186

01 01

02 02
Stationary funnel 1 1.207187 X) 134
03 03
PN 1065625
04 04
Movable funnel 1 1.207188 X) 46
05 05
PN 1065631
06 06
Scraber plate 1 3.207200 3100 3
07 07
PN 1075660
Screw 4 0343. M16×40 8.8 0
08 08
PN 722
Washer 4 4.090743 1130 0
09 09
PN 403324
Nut 4 0113. M16 8 0
10 10
PN 545
Washer 4 0701. M16 0
11 11
PN 556
12 12
Screw 8 0303. M16×45 8.8 1
13 13
PN 514
Nut 8 0113. M16 8 0
14 14
PN 545
Washer 8 0701. M16 0
15 15
PN 556
16 16
Clevis pin 2 4.205855 1130 1
17 17
PN 637919
Washer 2 0704. M30 Steel 0
18 18
PN 41105
Split pin 2 0840. 8×63 0
19 19
PN 394925
Lubricating nipple 2 7.000110 . 1/8 0
20 20
PN 8783
21 21

22 22
Flange 1 7.000041 . 800 1100 16
23 23
PN 588007
X) Line Sign GAN Date 27-SEP-05 Total 201
03 05 : 1100, 3100

Rev. Line Date Sign

 Dosimat feeder No. 50012504 Section: 02.01
A2-60x3.15, RH Drive
Product code 000 Sheet no. 01
Suspension
No. Drawing Mat Total
Description Req. Product No. Code Dim. Manuf. (Pat) code wgt kg

Assembly drawing 2.207216

01 01

02 02

03 03
Side section 2 2.207218 1100 48
04 04
PN 1065638
Hinge bearing 2 . . SKF GE 30 ES-2RS 1
05 05
PN 433164
06 06
Screw 12 0220. M16×40 4.6 1
07 07
PN 1342
Washer 24 0701. M16 0
08 08
PN 556
Nut 12 0113. M16 8 0
09 09
PN 545
10 10

11 11

12 12

13 13

14 14

15 15

16 16

17 17

18 18

19 19

20 20

21 21

22 22

23 23
X) Line Sign GAN Date 27-SEP-05 Total 50

Rev. Line Date Sign

 Dosimat feeder No. 50012504 Section: 03.01
A2-60x3.15, RH Drive
Product code 000 Sheet no. 01
Frame
No. Drawing Mat Total
Description Req. Product No. Code Dim. Manuf. (Pat) code wgt kg

Assembly drawing 20019827

01 01

02 02
Frame right side 1 10051244 1100 118
03 03
PN 1065641
04 04
Frame left side 1 10051245 1100 116
05 05
PN 1065642
06 06
Frame bracing 3 3.207165 1100 60
07 07
PN 1065643
08 08
Bushing 2 3.207066 1130 3
09 09
PN 918861
10 10
Screw 24 0303. M16×40 8.8 2
11 11
PN 2745
Nut 24 0113. M16 8 1
12 12
PN 545
Washer 24 0701. M16 0
13 13
PN 556
14 14
Chain support 2 30013155 1100 58
15 15
PN 1065644
16 16

17 17

18 18

19 19

20 20
Bolt 24 0213. M12×45 8.8 1
21 21
PN 638760
Nut 24 0113. M12 8 0
22 22
PN 518
Washer 24 0701. M12 0
23 23
PN 519
X) Line Sign GAN Date 27-SEP-05 Total 359

Rev. Line Date Sign

 Dosimat feeder No. 50012504 Section: 04.01
A2-60x3.15, RH Drive
Product code 000 Sheet no. 01
Apron belt
No. Drawing Mat Total
Description Req. Product No. Code Dim. Manuf. (Pat) code wgt kg

Assembly drawing 2.207107

01 01

02 02
Lamella 76 2.207170 1100 426
03 03
PN 1065650
04 04
Screw 304 0343. M10×30 8.8 6
05 05
PN 27976
Self-locking nut 304 0151. M10 5 3
06 06
PN 15472
Spring washer 304 0720. M10 X) 1
07 07
PN 1036
08 08

09 09

10 10

11 11

12 12

13 13

14 14

15 15

16 16

17 17

18 18

19 19

20 20

21 21

22 22

23 23
X) Line Sign GAN Date 27-SEP-05 Total 436
07 : Spring steel HV 430-530

Rev. Line Date Sign

 Dosimat feeder No. 50012504 Section: 05.01
A2-60x3.15, RH Drive
Product code 000 Sheet no. 01
Stationary shaft
No. Drawing Mat Total
Description Req. Product No. Code Dim. Manuf. (Pat) code wgt kg

Assembly drawing 2.207171

01 01

02 02
Shaft 1 3.207147 1100 43
03 03
PN 1065659
Flanged slide bearing bushing 2 . . SKF GLY.PBG 353916 F 0
04 04
PN 867517
Assembly drawing 2.163920
05 05
Chain wheel 2 2.145546 1130 58
06 06
PN 867566
Hub 2 3.132975 1100 20
07 07
PN 919506
Tension spindle 2 3.207065 1130 4
08 08
PN 919508
Bearing 4 . . SKF 6217 7
09 09
PN 867671
10 10

11 11
Distance pipe 2 4.205853 1100 2
12 12
PN 1065663
Pressure ring 2 3.207067 1100 1
13 13
PN 919433
Bearing cover 2 3.207148 1100 8
14 14
PN 1065664
Lubricating nipple 2 7.000110 . 1/8 0
15 15
PN 8783
Screw 16 0303. M10×30 8.8 0
16 16
PN 28721
Lock nut 2 7.000017 . M30 2 1110 0
17 17
PN 690774
Retainer bearing 4 3.207153 1100 6
18 18
PN 1065668
Pressure bushing 2 3.207064 1130 10
19 19
PN 919517
Cover 2 3.124162 1100 3
20 20
PN 919518
21 21

22 22
Screw 2 0303. M12×30 8.8 0
23 23
PN 2418
X) Line Sign GAN Date 27-SEP-05 Total 162

Rev. Line Date Sign

 Dosimat feeder No. 50012504 Section: 06.01
A2-60x3.15, RH Drive
Product code 000 Sheet no. 01
Drive Shaft
No. Drawing Mat Total
Description Req. Product No. Code Dim. Manuf. (Pat) code wgt kg

Assembly drawing 2.207180

01 01

02 02
Shaft 1 3.207151 2120 35
03 03
PN 1065693
04 04
Assembly drawing 2.153133
05 05
Chain wheel 2 2.145546 1130 58
06 06
PN 867566
Hub 2 3.207162 1100 22
07 07
PN 1065699
08 08

09 09

10 10
Flanged bearing unit 1 . . SYT 75 F,SKF 11
11 11
PN 758320
Flanged bearing unit 1 . . SYT 75 L,SKF 11
12 12
PN 758321
13 13

14 14

15 15

16 16

17 17
Bolt 8 0213. M20×80 8.8 2
18 18
PN 962
Nut 8 0113. M20 8 1
19 19
PN 434
Washer 8 0701. M20 0
20 20
PN 693
21 21
Locking Assembly 2 . 80×120 . Ringfeder RFN 7012 3
22 22
PN 404459
23 23
X) Line Sign GAN Date 27-SEP-05 Total 143

Rev. Line Date Sign

 Dosimat feeder No. 50012504 Section: 07.01
A2-60x3.15, RH Drive
Product code 000 Sheet no. 01
Roller chain, M112
No. Drawing Mat Total
Description Req. Product No. Code Dim. Manuf. (Pat) code wgt kg

Assembly drawing X) 1 2.207197 . . Ketten wulff or svend hoyer 247

01 01
PN 1065764
02 02

03 03

04 04

05 05

06 06

07 07

08 08

09 09

10 10

11 11

12 12

13 13

14 14

15 15

16 16

17 17

18 18

19 19

20 20

21 21

22 22

23 23
X) Line Sign GAN Date 27-SEP-05 Total 247
01 : Roller chain M112, 2 off L=7600 (2x76 links)

Rev. Line Date Sign

 Dosimat feeder No. 50012504 Section: 08.01
A2-60x3.15, RH Drive
Product code 000 Sheet no. 01
Load cell arrangement
No. Drawing Mat Total
Description Req. Product No. Code Dim. Manuf. (Pat) code wgt kg

Assembly drawing 1.207685

01 01
Retainer iron 2 4.206006 1100 6
02 02
PN 1066221
Retainer iron 6 4.205859 1100 1
03 03
PN 1066222
Retainer iron 2 3.207180 1100 10
04 04
PN 1066223
Weigh cell X) 2
05 05
PN 925933
06 06
Connection Piece 2 3.207221 1100 1
07 07
PN 1066224
Screw 2 0305. M12×50 12.9 0
08 08
PN 910781
Washer 2 0701. M12 0
09 09
PN 519
10 10
Screw 4 0303. M12×100 8.8 0
11 11
PN 51817
Self-locking nut 4 0151. M12 5 0
12 12
PN 15056
Washer 8 0701. M12 0
13 13
PN 519
14 14
Screw 4 0223. M16×55 8.8 0
15 15
PN 4510
Washer 4 0701. M16 0
16 16
PN 556
Square taper washer 4 0710. M16 0
17 17
PN 8152
Nut 4 0113. M16 8 0
18 18
PN 545
19 19
Rigging screw X) 2 . . FYNS KRANUDSTYR 26400060 15
20 20
PN 919672
Screw 4 0223. M12×50 8.8 0
21 21
PN 4517
Washer 8 0701. M12 0
22 22
PN 519
Self-locking nut 4 0151. M12 5 0
23 23
PN 15056
X) Line Sign GAN Date 27-SEP-05 Total 33
05 : To be supplied by electrical dept.
20 : Fork, eye

Rev. Line Date Sign

 Dosimat feeder No. 50012504 Section: 08.01
A2-60x3.15, RH Drive
Product code 000 Sheet no. 02
Load cell arrangement
No. Drawing Mat Total
Description Req. Product No. Code Dim. Manuf. (Pat) code wgt kg

Glue 1 . 50ml . Loctite 243 0

01 01
PN 901914
02 02
Screw 4 0223. M16×40 8.8 0
03 03
PN 1023
Washer 8 0701. M16 0
04 04
PN 556
Nut 4 0113. M16 8 0
05 05
PN 545
06 06
Erection Bracket 2 2.207204 1100 17
07 07
PN 1066233
08 08
Bolt 4 0213. M16×140 8.8 1
09 09
PN 44017
Washer 8 0700. M16 0
10 10
PN 795045
Nut 4 0113. M16 8 0
11 11
PN 545
12 12
Screw 4 0223. M12×35 8.8 0
13 13
PN 3588
Washer 4 0700. M12 0
14 14
PN 801775
Nut 4 0113. M12 8 0
15 15
PN 518
16 16

17 17

18 18

19 19

20 20

21 21

22 22

23 23
X) Line Sign GAN Date 27-SEP-05 Total 18

Rev. Line Date Sign

 Dosimat feeder No. 50012504 Section: 09.01
A2-60x3.15, RH Drive
Product code 000 Sheet no. 01
Chain lubrication system
No. Drawing Mat Total
Description Req. Product No. Code Dim. Manuf. (Pat) code wgt kg

Assembly drawing 1.207207

01 01

02 02
Mounting plate 1 4.205862 1100 2
03 03
PN 1066264
Mounting plate 1 4.205863 1100 0
04 04
PN 919701
05 05
Lubrication pump 1 . . Lincoln 203CS-4YNBOE1-1K6-24-F1V 8
06 06
PN 919703
Safety valve 1 . . Lincoln 604-27158-1
07 07
PN 919704
08 08
Metering device SSV 8-K 1 . . 619-25754-4 LINCOLN 1
09 09
PN 899579
10 10
Male connector 1 . . LINCOLN GE6-LLR 1/8 KC 0
11 11
PN 919705
12 12
Coupling nut 4 . . Lincoln 223-12374-9 0
13 13
PN 649724
Ferrule 4 . . Lincoln 223-12295-2 0
14 14
PN 649725
Valve body 6mm 4 . . Lincoln 504-30364-3 0
15 15
PN 725445
Clamping ring 4 . . Lincoln 404-23034-1 0
16 16
PN 649723
Elbow union 4 . ø6-9-0162 . Lincoln 0
17 17
PN 919713
Closure plug 4 . . LINCOLN 303-175301 0
18 18
PN 919719
Washer 4 . . LINCOLN 209-12464 0
19 19
PN 919773
20 20
Copper tube 8 2186. 6mm×0.8mm,L=6.0m 6
21 21
PN 919775
22 22

23 23
X) Line Sign GAN Date 27-SEP-05 Total 17

Rev. Line Date Sign

 Dosimat feeder No. 50012504 Section: 09.01
A2-60x3.15, RH Drive
Product code 000 Sheet no. 02
Chain lubrication system
No. Drawing Mat Total
Description Req. Product No. Code Dim. Manuf. (Pat) code wgt kg

Pipe clip 15 . . STAUFF LB1-6-PP 0

01 01
PN 919931
02 02
Screw 15 0220. M6×20 4.6 0
03 03
PN 2718
Washer 15 0702. M6 0
04 04
PN 190660
05 05
Screw 3 0223. M8×30 8.8 0
06 06
PN 13206
Nut 3 0113. M8 8 0
07 07
PN 251159
Washer 3 0701. M8 0
08 08
PN 4450
09 09
Bolt 2 0213. M5×65 8.8 0
10 10
PN 919947
Nut 2 0113. M5 8 0
11 11
PN 50362
Washer 2 0701. M5 0
12 12
PN 9931
13 13
Nipple N8 1 2449. 1/4×1/4 ISO 7/1-R 0
14 14
PN 919954
Socket M2 1 2409. 1/4in, 0
15 15
PN 374202
16 16

17 17

18 18

19 19

20 20

21 21

22 22

23 23
X) Line Sign GAN Date 27-SEP-05 Total

Rev. Line Date Sign

 Dosimat feeder No. 50012504 Section: 10.01
A2-60x3.15, RH Drive
Product code 000 Sheet no. 01
Drive unit
No. Drawing Mat Total
Description Req. Product No. Code Dim. Manuf. (Pat) code wgt kg

Assembly drawing 1.216352

01 01

02 02
Support for torque arm 1 2.207172 1100 9
03 03
PN 1066285
Turque arm 1 2.207273 1100 14
04 04
PN 1066286
05 05

06 06
Shaft 1 4.205856 2002 1
07 07
PN 1066288
Split pin 2 0840. 5×63 0
08 08
PN 721713
Bushing for torque arm 1 . . Type 40×65×88 No. 309437 Flender 0
09 09
PN 707961 Bocholt
Washer 2 7.000079 . 40 1100 1
10 10
PN 38254
Screw 6 0303. M16×50 8.8 1
11 11
PN 35373
Nut 6 0113. M16 8 0
12 12
PN 545
Washer 12 0701. M16 0
13 13
PN 556
14 14
Gear including shrink disc, motor flange & 1 100
15 15
coupling PN 933961
Motor X) 1
16 16
PN 922104
Screw 8 0303. M12×40 8.8 0
17 17
PN 12379
Nut 8 0113. M12 8 0
18 18
PN 518
Washer 8 0701. M12 0
19 19
PN 519
Locking Assembly 2 . 75×100 . Ringfeder RFN 4071 9
20 20
PN 933963
21 21

22 22

23 23
X) Line Sign GAN Date 27-SEP-05 Total 135
16 : To be supplied by electrical department.

Rev. Line Date Sign

 Dosimat feeder No. 50012504 Section: 11.01
A2-60x3.15, RH Drive
Product code 000 Sheet no. 01
Screening
No. Drawing Mat Total
Description Req. Product No. Code Dim. Manuf. (Pat) code wgt kg

Assembly drawing 10051503

01 01

02 02
Side plate, Right 1 30013234 X) 5
03 03
PN 1066296
Side plate, Left 1 30013235 X) 5
04 04
PN 1023538
Top plate 1 30013236 X) 11
05 05
PN 1020051
Side plate, Right 1 30013237 X) 12
06 06
PN 1020055
Side plate, Left 1 30013238 X) 12
07 07
PN 1023539
Side plate, Right 1 30013239 X) 17
08 08
PN 1020072
Side plate, Left 1 30013240 X) 17
09 09
PN 1023540
Side plate, Scraper 2 30013222 X) 8
10 10
PN 990291
End plate 1 3.207322 X) 3
11 11
PN 1066951
End plate scraper 1 30013181 X) 2
12 12
PN 990543
Screening for coupling 1 3.207300 X) 1
13 13
PN 1066294
Screening for shaft 2 3.207324 X) 2
14 14
PN 990327
15 15
Screw 4 0223. M8×16 8.8 0
16 16
PN 13048
Washer 4 0700. M8 0
17 17
PN 2234
18 18
Screw 108 0220. M8×25 4.6 2
19 19
PN 27142
Nut 108 0113. M8 8 1
20 20
PN 251159
Washer 108 0701. M8 0
21 21
PN 4450
22 22

23 23
X) Line Sign GAN Date 27-SEP-05 Total 98
03 04 05 06 07 08 09 10 11 12 13 14 : 1100, 3 mm perforated metal
sheets,Model:409-013, from RICH.MULLER

Rev. Line Date Sign

 Dosimat feeder No. 50012504 Section: 12.01
A2-60x3.15, RH Drive
Product code 000 Sheet no. 01
Rod gate
No. Drawing Mat Total
Description Req. Product No. Code Dim. Manuf. (Pat) code wgt kg

Assembly Drawing 3.207184

01 01

02 02
Frame 1 10051299 1100 180
03 03
PN 1066366
04 04

05 05

06 06
Rod 15 1.207176 X) 86
07 07
PN 1066367
08 08
Screw 28 0223. M20×50 8.8 5
09 09
PN 1268
Nut 28 0113. M20 8 2
10 10
PN 434
Washer 28 0701. M20 0
11 11
PN 693
Square taper washer 28 0710. M20 2
12 12
PN 14235
13 13

14 14

15 15

16 16

17 17

18 18

19 19

20 20

21 21

22 22

23 23
X) Line Sign GAN Date 27-SEP-05 Total 275
07 : 1100, 2100

Rev. Line Date Sign

 Dosimat feeder No. 50012504 Section: 13.01
A2-60x3.15, RH Drive
Product code 000 Sheet no. 01
Discharge casing
No. Drawing Mat Total
Description Req. Product No. Code Dim. Manuf. (Pat) code wgt kg

Assembly drawing 20017404

01 01

02 02
Frame 1 10044633 1100 26
03 03
PN 1066420
Frame 1 20017414 1100 20
04 04
PN 1066422
05 05

06 06
Plate 2 30011775 1100 38
07 07
PN 1066424
08 08
Plate 1 30011776 1100 12
09 09
PN 1066425
Plate 1 20017417 1100 48
10 10
PN 1066427
11 11

12 12
Support 2 30011777 1100 38
13 13
PN 1066429
14 14
Rubber carpet 1 30013183 X) 2
15 15
PN 1075627
Rtainer iron 1 30013182 1100 2
16 16
PN 1075628
Screw 6 0223. M12×35 8.8 0
17 17
PN 3588
Washer 6 0701. M12 0
18 18
PN 519
19 19

20 20
Observation door 1 4.217356 1100 3
21 21
PN 418150
Screw 1 0303. M12×30 8.8 0
22 22
PN 2418
Washer 1 0701. M12 0
23 23
PN 519
X) Line Sign GAN Date 27-SEP-05 Total 189
15 : Rubber ISO quality SBR 50-90 (styrine rubber)

Rev. Line Date Sign

 Dosimat feeder No. 50012504 Section: 13.01
A2-60x3.15, RH Drive
Product code 000 Sheet no. 02
Discharge casing
No. Drawing Mat Total
Description Req. Product No. Code Dim. Manuf. (Pat) code wgt kg

Flanges for low-pressure 1 1.138000 . 1000×500 1100 15

01 01
PN 1076798
Screw 24 0223. M20×50 8.8 4
02 02
PN 1268
Nut 24 0113. M20 8 2
03 03
PN 434
Washer 24 0701. M20 0
04 04
PN 693
05 05

06 06
Screw 11 0223. M16×50 8.8 1
07 07
PN 1150
Nut 11 0113. M16 8 0
08 08
PN 545
Washer 11 0701. M16 0
09 09
PN 556
10 10

11 11

12 12

13 13

14 14

15 15

16 16

17 17

18 18

19 19

20 20

21 21

22 22

23 23
X) Line Sign GAN Date 27-SEP-05 Total 22

Rev. Line Date Sign

 Dosimat feeder No. 50012504 Section: 14.01
A2-60x3.15, RH Drive
Product code 000 Sheet no. 01
Apron belt scraper
No. Drawing Mat Total
Description Req. Product No. Code Dim. Manuf. (Pat) code wgt kg

Assembly drawing 2.207240

01 01

02 02
Suspension, right 1 3.207245 1100 6
03 03
PN 1020049
Suspension, left 1 3.207246 1100 6
04 04
PN 610992
Scraber shaft 1 3.207247 X) 15
05 05
PN 1072179
06 06
Scraper 5 3.207248 2400 2
07 07
PN 1072180
Scraper 5 3.207249 2400 1
08 08
PN 1072184
Scraper 5 3.207250 2400 1
09 09
PN 1072187
10 10
Rubber cushion 1 4.205872 X) 1
11 11
PN 1072191
Torque arm 2 3.207251 1100 2
12 12
PN 1072220
Retainer iron 1 3.207253 1100 3
13 13
PN 1072212
14 14
Screw 2 0223. M12×75 8.8 0
15 15
PN 9329
Nut 2 0113. M12 8 0
16 16
PN 518
17 17
Bolt 10 0213. M12×50 8.8 1
18 18
PN 4519
Nut 10 0113. M12 8 0
19 19
PN 518
Washer 10 0701. M12 0
20 20
PN 519
21 21
Set screw 4 0515. M10×20 45 H 0
22 22
PN 9328
23 23
X) Line Sign GAN Date 27-SEP-05 Total 38
05 : 1100, 2100
11 : Nitril rubber type : FJ 5017 (Ferd. Johansen)

Rev. Line Date Sign

 Dosimat feeder No. 50012504 Section: 14.01
A2-60x3.15, RH Drive
Product code 000 Sheet no. 02
Apron belt scraper
No. Drawing Mat Total
Description Req. Product No. Code Dim. Manuf. (Pat) code wgt kg

Screw 4 0223. M16×40 8.8 0

01 01
PN 1023
Nut 4 0113. M16 8 0
02 02
PN 545
Washer 4 0701. M16 0
03 03
PN 556
04 04

05 05

06 06

07 07

08 08

09 09

10 10

11 11

12 12

13 13

14 14

15 15

16 16

17 17

18 18

19 19

20 20

21 21

22 22

23 23
X) Line Sign GAN Date 27-SEP-05 Total

Rev. Line Date Sign

 Dosimat feeder No. 50012504 Section: 15.01
A2-60x3.15, RH Drive
Product code 000 Sheet no. 01
Chain scraper
No. Drawing Mat Total
Description Req. Product No. Code Dim. Manuf. (Pat) code wgt kg

Chain scraper X) 1
01 01
PN 1157141
02 02

03 03

04 04

05 05

06 06

07 07

08 08

09 09

10 10

11 11

12 12

13 13

14 14

15 15

16 16

17 17

18 18

19 19

20 20

21 21

22 22

23 23
X) Line Sign GAN Date 27-SEP-05 Total
01 : See separate order

Rev. Line Date Sign

 Dosimat feeder No. 50012504 Section: 16.01
A2-60x3.15, RH Drive
Product code 000 Sheet no. 01
Tools
No. Drawing Mat Total
Description Req. Product No. Code Dim. Manuf. (Pat) code wgt kg

01 01

02 02

03 03

04 04

05 05

06 06

07 07

08 08

09 09

10 10
Torque wrench 1 . . Ringfeder MCCM-200 1
11 11
PN 1072832
Connecting piece 1 . . Ringfeder SSD-3/8" 0
12 12
PN 1072755
Socket for hexagon bolt 1 . . Ringfeder 3/8"-10 0
13 13
PN 1072836
14 14
Torque wrench 1 . . Ringfeder MCCM-100 1
15 15
PN 923040
Connecting piece 1 . . Ringfeder SSD-1/4" 0
16 16
PN 923041
Socket for hexagon bolt 1 . . Ringfeder 1/4"-13 0
17 17
PN 923042
18 18

19 19

20 20

21 21

22 22

23 23
X) Line Sign GAN Date 27-SEP-05 Total 2

Rev. Line Date Sign