Scribd
Upload
755 views2 pages

Specifications: Amp CM15R

This document provides specifications for the CM15R amplifier, including: - Input voltage options ranging from 100-240V at 50/60Hz - 1MΩ input impedance and 35W power requirements - 15W RMS power output into an 8Ω rated load impedance - Dimensions of 305mm height, 315mm width, 190mm depth and 6kg unit weight - 89dB speaker sensitivity - Safety instructions regarding proper use, ventilation, power connection, and potential interference sources.

Uploaded by

Olivér Kiss
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
755 views2 pages

Specifications: Amp CM15R

This document provides specifications for the CM15R amplifier, including: - Input voltage options ranging from 100-240V at 50/60Hz - 1MΩ input impedance and 35W power requirements - 15W RMS power output into an 8Ω rated load impedance - Dimensions of 305mm height, 315mm width, 190mm depth and 6kg unit weight - 89dB speaker sensitivity - Safety instructions regarding proper use, ventilation, power connection, and potential interference sources.

Uploaded by

Olivér Kiss
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Specifications

Amp CM15R

Input Voltage ~100V,~110V,~120V,~220V,~230V,~240V 50/60Hz Factory Option

Input Impedance 1 MΩ

Power Requirements 35W

Power Output 15W R.M.S.

Rated Load Impedance 8Ω


Speaker Custom 8" Speaker

Dimension　 Height: 305mm Width: 315mm Depth: 190mm

Unit Weight 6kg

Sensitivity 89dB

cortguitars.com
v22.0204
Important Safety Instructions
WARNING : When using electrical products, basic cautions should always be followed,
including the following.
Read, keep and follow all instructions. CHANNEL SELECT switch
Pressing the CH Select Switch will engage the Distortion Channel.
Heed all warnings.
(The Distortion Channel LED illuminates when the Distortion Channel is active)
To prevent damage, fire or shock hazard, do not expose this unit to rain or moisture.
This product should be located away from heat source such as radiators, heat registers, or other products
that produce heat.
Do not block any of the ventilation openings. Install in accordance with manufacturer’s instructions.
Only connect the power supply cord to an earth grounded AC receptacle in accordance with the voltage
and frequency ratings listed under INPUT POWER on the rear panel of this unit.
Protect the power supply cord from being pinched or abraded.
The power supply cord should be unplugged when left unused for long periods of time, or during electrical
storms.
Do not drip nor splash liquids, nor place liquid filled containers on the unit.
Clean only with dry cloth.
Cort amplifiers and ear/headphones (if equipped) are capable of producing very high sound pressure levels
which may cause temporary or permanent hearing damage. Use care when setting and adjusting volume
levels during use.
Some types of Radio Frequency Interference (RFI) or Electromagnetic interference (EMI) may affect
operation of the amplifier. Sources of RFI and EMI may include; Cellular telephones, radios, transceivers,
televisions, and some computer equipment. Should a difference in speaker output be noticed under these
conditions, try physically moving the amplifier away from the interference source or connect the amplifier
to a different-grounded power circuit.
Please do not use the amplifier with other large objects around it that limits its access.
Please assure that the amplifier is plugged into a grounded outlet.
Please place amplifier where the power cord can easily be unplugged in the even of a problem
Make sure to connect the ground before using an amplifier.
Operating Temperature : -10°C to 35°C

You might also like