40-000MHZX09 Datasheet

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

EURO QUARTZ XO91 Series Oscillators

7 x 5mm SMD HCMOS


Miniature 7.0 x 5.0 x 1.4mm hermetically-sealed package
Frequency Range 500kHz to 125MHz
Tristate (Enable/Disable) function as standard
Page 1 of 2
Supply voltage range 1.8, 2.5, 3.3 or 5.0 Volts

DESCRIPTION OUTLINE & DIMENSIONS


XO91miniature oscillators consist of a TTL/CMOS-compatible hybrid
circuit together with a miniature quartz crystal packaged in a low-
profile, industry-standard ceramic package. The high quality design
and materials employed provide a highly reliable clock oscillator in a
miniature package while mass production methods ensure that the
XO91 provides a cost-effective oscillator solution.

SPECIFICATION
Frequency Range: 500kHz to 125.0MHz
Supply Voltage: 1.8, 2.5, 3.3 or 5.0 Volts ±10%
Output Logic: HCMOS/LSTTL
Frequency Stability*
Temperature Range Stability
0° to +50°C: from ±10ppm
-20° to +70°C: from ±15ppm
-40 to +85°C: from ±25ppm
-55° to +125°C: from ±100ppm
Rise/Fall Time: see table
Output Voltage:
HIGH ‘1’: 90%Vdd minimum
LOW ‘0’: 10%Vdd maximum
Output Load
CMOS: 15pF (50pF available)
TTL: 10 LSTTL loads
Duty Cycle: 50%±5% typical
Supply Current: See table
Operating Temperature
0~50°C (Light Commercial)
0~70°C (Commercial)
-40~+85 (Industrial)
-55~+105°C (Military)
Storage Temperature: -55~+125°C
Startup Time
500kHz to 32MHz: 5ms max.
32MHz+ to 125MHz: 10ms max. SOLDER TEMPERATURE PROFILE
(to reach 90% amplitude at 25±2°C)
Ageing: ±5ppm max. In first year
Phase Jitter RMS: <1ps typical
Enable Time: 100ms max.
Disable Time: 100ns max.
Tristate Function (Pad 1):
Output (Pad 3) is active if Pad 1 is not connected or a
voltage to Pad 1 is 'HIGH'. Output is high impedance
when 'LOW' or GROUND is applied to Pad 1.

* Frequency stability is inclusive of calibration tolerance at 25°C,


frequency change due to shock & vibration, ±10 supply voltage
variation and stability over temperature range.

Note: Parameters are measured at ambient temperature of 25°C,


supply voltage as stated and a load of 15pF

CURRENT CONSUMPTION & RISE/FALL TIME

Supply Voltage (±10%)


Frequency Range
+1.8V +2.5V +3.3V +5.0V Rise/Fall
Time
500kHz to 32MHz 8mA 10mA 15mA 25mA 4ns max.
32MHz+ to 50MHz 10mA 14mA 16.5mA 35mA 3ns max.
40MHz+ to 125MHz 25mA 30mA 35mA 40mA 2ns max.

EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE


Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 Email: [email protected] www.euroquartz.co.uk
EURO QUARTZ XO91 Series Oscillators
7 x 5mm SMD HCMOS
Page 2 of 2

ENVIRONMENTAL PERFORMANCE SPECIFICATION PART NUMBERING


RoHS Status: Compliant Example: 16.000MHz XO91050UCTA
Storage Temperature Range: -50° to +100°C
Humidity: 85% RH, 85°C for 48 hours Frequency
Series Designation XO91
Hermetic Seal: Leak rate 2x10-8 ATM -cm3/s max.
Stability*
Solderability: MIL-STD-202F Method 208E
100 = ±100ppm
Reflow: 260°C for 10 sec (see diagram)
50 = ±50ppm
Vibration: MIL-STD-202F Method 204, 35g,
25 = ±25ppm
50 to 2000Hz
Output Universal
Shock: MIL-STD-202F Method 213B, test
Operating Temp. Range
Condition E, 1000g ½ sinewave
C = 0+70°C
D = -20~+70°C
I = -40~+85°C
M = -55~+125°C (±100ppm only)
Tristate Function
Supply Voltage
Blank = 5.0 Volts
A = 3.3 Volts
B = 2.5 Volts
C = 1.8 Volts
* For other stability requirements enter figure required.

EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE


Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 Email: [email protected] www.euroquartz.co.uk

You might also like