Scribd
Upload
268 views4 pages

NEC SL1000 Programming Manual (Simplify)

This document provides instructions for programming an NEC SL1000 phone system. It includes steps for clearing system data, logging into the programming interface, setting the date and time, configuring toll restriction classes and tables, assigning trunk and extension settings, configuring caller ID, programming function keys, setting up speed dials, configuring a doorphone, and other features. The programming involves accessing codes to configure various settings via the phone system interface.

Uploaded by

Alberto Jeronimo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
268 views4 pages

NEC SL1000 Programming Manual (Simplify)

This document provides instructions for programming an NEC SL1000 phone system. It includes steps for clearing system data, logging into the programming interface, setting the date and time, configuring toll restriction classes and tables, assigning trunk and extension settings, configuring caller ID, programming function keys, setting up speed dials, configuring a doorphone, and other features. The programming involves accessing codes to configure various settings via the phone system interface.

Uploaded by

Alberto Jeronimo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

NEC SL1000 Programming Manual (simplify)

Manual System Data Clear


1) Press and hold LOAD button, turn ON KSU while still holding LOAD button
for 10 seconds until blue LED start flashing.
2) Release LOAD button

PCPro
Username: tech
Password: 12345678
Default IP: 192.168.0.10

Programming by Keyphone
Login to System Programming
Press SPEAKER #*#*, enter system password 12345678 HOLD

Logout from System Programming


Press MUTE until Program Mode, press SPEAKER

Phone Button VS Programming Button


MUTE = one step backward
DND = Toggle between upper and lower line
HOLD = Enter go to Next
↑ = next ↓ = previous

Setup Date & Time


[10-01-01] Year
[10-01-02] Month
[10-01-03] Day
[10-01-04] Week (1:Sun)
[10-01-05] Hour (24 hour mode)
[10-01-06] Minute
[10-01-07] Second

Setup Toll Restriction Table


Class 1 – International/ No Restriction
Class 2 – STD, HP, Local
Class 3 – HP, Local
Class 4 – Local Only
Class 5 – Intercom Only

Setup Table for Toll Restriction Class 1


[21-05-01] Toll Restriction Class – 1
International Call Restriction Table – 0 (Unassigned)

Setup Table for Toll Restriction Class 2


[21-05-01] Toll Restriction Class – 2
International Call Restriction Table – 1 (Assigned)
[21-06-01] Block International Code – 00, 02, 101, 600

1 Prepared by Voice IP Solutions (M) Sdn Bhd


Setup Table for Toll Restriction Class 3
[21-05-01] Toll Restriction Class – 3
International Call Restriction Table – 1 (Assigned)
[21-05-08] Restriction Table – 1 (TolCls3, Restriction TBL1)
[21-06-07] Restriction Code Table (Restriction TBL) – 1
Table Entry 01 to 07, set 03, 04, 05, 06, 07, 08, 09

Setup Table for Toll Restriction Class 4


[21-05-01] Toll Restriction Class – 4
International Call Restriction Table – 1 (Assigned)
[21-05-08] Restriction Table – 2
[21-06-07] Restriction Code Table – 2
Table Entry 01, set 0

Setup Table for Toll Restriction Class 5


[21-05-01] Toll Restriction Class – 5
International Call Restriction Table – 1 (Assigned)
[21-05-08] Restriction Table 3
[21-06-07] Restriction Code Table – 3
Table Entry 01 to 10, set 0,1,2,3,4,5,6,7,8,9

Assign Toll Restriction Class for Extension


[21-04-01] Toll Restriction Class for Extension, Mode1=day, Mode2=night

Assign Trunk Lines for Different Group/ Company


[14-07-01] Trunk Access Map Setup 1 to 126 Maps
- Assign trunk line into respective Access Map & Trunk Access Options.
(0) No access (can not access that line)
(1) Outgoing access only (can not receive incoming call)
(2) Incoming access only (can not make outgoing call)
(3) Access only when trunk on Hold
(4) Outgoing access and access when trunk on hold
(5) Incoming access and access when trunk on hold
(6) Incoming/ Outgoing access
(7) Incoming/ Outgoing access and access when trunk on Hold
[15-06-01] Trunk Access Map for Extensions
- Day time/ Night time, which extension can access which Trunk Access
Map and its access options?

Assign Incoming Ringing for Extension


[22-04-01] Incoming Ring Group Extension Assignment
- assign extension into Ring Group
Ring Group 1 & Ring Group 2
[22-05-01] Incoming Trunk Ring Group Assignment
- Mode1=Day and Mode2=Night
- Day time or/and night time, Trunk 1/2/3/4, where to ring? (key in Ring
Group Number)

Assign Delay Ringing for Incoming Call


[22-04-01] Incoming Ring Group Extension Assignment

2 Prepared by Voice IP Solutions (M) Sdn Bhd


- Assign extensions into Delay Ring Group
[22-08-01] DIL/ IRG No Answer Destination
- Day time/ Night time, Trunk 1/2/3/4, where to delay ring? (key in Delay
Ring Group Number)
[22-01-04] Normal DIL Incoming Call No Answer Time (sec)
- To set when to start ring at Delay Ring Group?

Caller ID
[14-02-10] Caller ID – Set Caller ID for Analogue Trunk Line
- 0 = disable, 1 = enable
[15-03-09] Caller ID External Module – Set Caller ID for SLT
- 0 = disable, 1 = enable
[15-03-11] Caller ID Type – default = FSK(0)
- 0 = FSK, 1 = DTMF

To Program Progammable Button


Function Key Normal Code – function 00 – 99, #00 - #99
Function Key Appearance Code – function *00 - *99
1) To clear function key
SPEAKER + 852 + key + 000

2) To program trunk key


SPEAKER + 852 + key + *01 + 01 (as trunk 1)/ 02 (as trunk 2)

3) To program extension number (DSS)


SPEAKER + 851 + key + 01 + extension number + HOLD

System Speed Dial


[13-01-03] Assign Bin Size (default 1000, 0~999)
4 digit Bin can only access by Directory Dial feature, not Service Code
[13-04-01] Enter System Speed Dialing Numbers and Names (no need prefix 9)
[11-10-04] Service Code for Storing Common Speed Dialing Numbers by Phone
(default 853)
[11-12-10] Service Code for Accessing Common Speed Dial (default 813)

Personal/ Station Speed Dial


[11-01-01] System Numbering
- 1st Dial Digit, select 6
- Under 6x, Dial Digit Length = 1, Type = Service Code
[11-12-40] Speed Dial Station (One Touch), change to 6 (default 761)
[15-14-01] Select desired extension, enter prefix 9 + dial number
[11-11-39] Service Code for Storing Station Speed Dialing Numbers by Phone
(default 855)

To store a Personal/ Station Speed Dialing Number (SLT Phone only)


1. Lift the Handset
2. Dial *6 (default 855),
3. Dial the Station Speed Dial buffer number to be programmed (0~9)
4. Enter prefix 9 + dial number + Hang up

3 Prepared by Voice IP Solutions (M) Sdn Bhd


Doorphone
[10-03] HBIU Configuration Setup
[10-03-01] Slot No1, HBI 6 (Physical Port 6), Type 8 (door phone)
– configure port 6&7 as door phone port
[10-03-02] Slot No1, HBI 6 (Physical Port 6), Port 1 (Logical Port)
[10-03-03] Slot No1, HBI 6 (Physical Port 6), T-Gain 32
[10-03-04] Slot No1, HBI 6 (Physical Port 6), R-Gain 32
[10-03-05] Slot No1, HBI 6 (Physical Port 6), P-Type 1 (door phone)
[10-03-06] Slot No1, HBI 6 (Physical Port 6), Line 0

[10-61] Relay Port Setup


[10-61-01] Relay 1, Relay Type 4 (door phone)

[32-02] Doorphone Ring Assignment


[32-02-01] Door 1, Mode 1, Tel 01 (Doorphone Ring Member 01) = 200 (ext)
- When visitor ring the doorphone, press FLASH to open door
- If Doorphone 1 not ring, press 8021 FLASH to open door
- If Doorphone 2 not ring, press 8022 FLASH to open door

Other Features
[14-01-07] Trunk Basic Setup – Outgoing Calls
- To enable (1) or disable (0) particular trunk from making outgoing calls.

[20-09-04] Check List – Notification for Incoming Call List Existence


- When they is a miss call, Check List will show on the screen
- 0 = disable, 1 = enable

[20-13-20] Account Code/ Toll Restriction Operator Alert (0=disable, 1=enable)


- Automatically call operator when restriction happen

[20-02-12] Multi-Line Telephone System Options – Force Intercom Ringing


- Set Intercom destination keyphone to Ring (1) or Voice (0)

[23-02-01] Call Pickup Group

[31-02-01] Internal Paging Group Assignment

4 Prepared by Voice IP Solutions (M) Sdn Bhd

You might also like