Nokia Command List

NOKIA COMMANDS:< xml="true" ns="urn:schemas-microsoft-com:office:office" prefix="o"

namespace="">

Hot Keys:
Ctrl + B repeats last and previous commands on the MML
Ctrl + Y interrupts current command being typed or run

Alarm monitoring:
ZAHO; displays current active alarms in actual MSC and
BSC only

ZEOL:#; displays active alarms on BCF (BCF = Site Manager

or CF)

ZEEI:BCF=#; displays the operational state of the site

ZEOH:date,time:BCF=#; displays alarm history for site for the date and time listed

ZAHO:ET,#; displays current alarms for that ET (PCM)

ZAHP:ET,#; displays alarm history for that ET

ZEEL:BL; displays locked Sites, Sectors and TRXs on BSC

Checking External Alarms:

ZEFO:BCF#:iop;

Investigating Clear Codes:

ZTUT:CLR; displays current clear codes on the MSC

ZTUL:CLR; displays latest history of clear codes

Canceling Bogus alarms on a Site: (Perform both commands)

ZEOR:#:alarm #; cancels alarm on site

ZEFR:#:OMU; resets the OMU (Operations and Maintenance Unit)

Canceling Bogus alarms on a BSC:

ZACC:####; cancels the alarm using the consecutive # in which it

came in

ZACA:####; cancels the alarm using the alarm identifier #

Locking and unlocking a Site:

ZEFS:bcf #:L; locks entire Site without Forced Handover

ZEFS:bcf #:U; unlocks entire Site

Locking and unlocking Sectors:

ZEQS:BTS=#:L; locks entire sector down without Forced Handover

ZEQS:BTS=#:L:FHO,#; shuts down entire sector with Forced Handover

ZEQS:BTS=#:U; unlocks entire sector

Locking and unlocking TRXs:

ZERS:BTS=#,TRX=#:L; locks TRX down without Forced Handover

ZERS:BTS=#,TRX=#:L:FHO,#; shuts down TRX with Forced Handover

ZERS: BTS=#,TRX=#:U; unlocks TRX

Resetting the Site or OMU:

ZEFR:#:SITE; restarts SITE

ZEFR:#:OMU; restarts OMU

Bouncing Lap D�s on a Site:

ZDTI:::PCM=#; displays Lap D channels for entire site

ZDTC:lap d #:BL; blocks desired Lap D channel

ZDTC:lap d #:WO; places Lap D channel in working state

Error Checking on an ET (PCM):

ZYMO:ET,#; checks error counter for specific ET

ZYEU:ET,#:SLIDL=5; resets error counter for specific ET

Querying the # of calls on a site:

ZERO:BTS=#; displays all calls on desired sector

ZERO:BTS=#,TRX=#; displays all calls on desired TRX only

Sparing or Rolling a BCSU:

ZUSI:BCSU; displays what BCSU the SP was previously on

ZFWO:BCSU=0&&8; displays what BCSU the BL condition is on

ZUSC:BCSU,#:SP; spares the BCSU with the BL condition on it

Y for Yes executes the command

Statusing Timeslots:

ZEEL::BCF=#; Status the timeslots on a BCF

Status ET alarms on a BSC

ZAHP:ET,:::; Show all ET's that are in alarm

Taking an ET out of < xml="true" ns="urn:schemas-microsoft-com:office:smarttags"

prefix="st1" namespace="">Seperated State

ZUSC:ET,#:SE; Will place the ET in a Separated - No Hardware state

(SE-NH)

Status session for User ID and commands:

ZIGO: Displays commands run for BSC on specific date and time.

Reloading software on a site:

ZEWV:BCF #:BU; Reloads the software on a BCF

Checking OMC alarms:

Open a terminal and telnet to the IP
Log in
Run the following command: df �k

Taking an ET out of BL state:

ZUSC:ET,#:
WORKING

BLOCKED

TEST

SEPERATED

SEPERATED-NO HARDWARE

Go back up the tree to get it back into Working

Rolling the BCCH on a Sector:

ZDTI:::PCM=#; Find out what TSL the radio is on that you want the
BCCH on

ZDTC:lapd:BL; Block the TSL on the radio that the BCCH is going to

ZDTC:lapd:AL; Allow activation of the TSL that the BCCH is going to

ZDTC:lapd:WO; Brings TSL to a working state that the BCCH is going to

ZDTI:::PCM=#; Find out what TSL the radio that HAD the BCCH is on

ZDTC:lapd:AD; Deny Activation of the TSL that HAD the BCCH on it

ZDTC:lapd:BL; Block the TSL that the BCCH was on

ZDTC:lapd:WO; Brings the TSL to a working state

GPRS Command

zeqv:bts=xxx:gena=n/y;

CEll Barred Command:

ZEQO:BTS=#:CEL;

Measurment Data Command

ZIFO:OMU:MEASUR::;

Who locked it:

ZIGO:YYYY-MM-DD,HR-MN::CMD=:FORMAT=:;
RUN DIAGNOSTICS TEST< xml="true" ns="urn:schemas-microsoft-com:office:office"
prefix="o" namespace="">

Zqus:bcf=xx;
Then type TOP and hit enter
9 for testing and hit enter
7 for run test and hit enter
Once you get printout (No Diagnostic Faults)
Type Top and hit enter
1 for fault display and hit enter
Should get True (OK)
Exit and you will be back out of TRUE card.
11

Page�:sur 22
�������������

ZDPY DISPLAY BID / PID OF CHORUS-TYPE PREPROCESSOR

ZDPP DISPLAY CID / PID OF PECTUS-TYPE PREPROCESSOR
ZDPX DISPLAY CID / PID / MID OF PREPROCESSOR
ZDRM SET OPERATING MODE
ZDRC CREATE SYNCHRONIZATION INPUTS
ZDRD DELETE SYNCHRONIZATION INPUTS
ZDRI INTERROGATE SYNCHRONIZATION UNITS
ZDRS SELECT SPECIAL FUNCTIONS
ZDRO SELECT OSCILLATOR HANDLING FUNCTIONS
ZDSC CREATE D-CHANNEL LINK SET
ZDSD DELETE D-CHANNEL LINK SET
ZDSI INTERROGATE D-CHANNEL LINK SET DATA
ZDSE CREATE BASE STATION CONTROLLER D-CHANNEL
ZDSL CREATE BSC LOGICAL UNIT D-CHANNEL
ZDSB INTERROGATE BASE STATION CONTROLLER D-CHANNEL DATA
ZDSF INTERROGATE D-CHANNEL DATA OF FUNCTIONAL UNIT
ZDTC MODIFY D-CHANNEL WORKING STATE
ZDTI INTERROGATE D-CHANNEL WORKING STATE
ZDTT MODIFY D-CHANNEL WORKING STATE OF FUNCTIONAL UNIT
ZDTF INTERROGATE D-CHANNEL WORKING STATE OF FUNCTIONAL UNIT
ZDUP PREVENT FILE UPDATES TO DISK
ZDUR RESUME FILE UPDATES TO DISK
ZDUD DISPLAY DISK UPDATE STATE
ZDUQ DISPLAY DISK UPDATE QUEUE STATE
ZDVC CREATE NEW SUBLOG FILE
ZDVE CLOSE SUBLOG FILE
ZDVR RESIZE LOGFILE
ZDVM MODIFY LOG FILTERING SETT
ZDVD DELETE SUBLOG FILE
ZDVF CLEAR SUBLOG FILE
ZDVI INTERROGATE LOG FILTERING
ZDVG DISPLAY LOG DIRECTORY
ZDVL DISPLAY LOG DATA
ZDVP DISPLAY LOG SETTINGS
ZDVT DISPLAY LOG STATISTICS
ZEAC CREATE ADJACENT CELL PARAMETERS
ZEAD DELETE ADJACENT CELL PARAMETERS
ZEAR DELETE INCOMING ADJACENT CELLS
ZEAM MODIFY ADJACENT CELL PARAMETERS
ZEAO OUTPUT ADJACENT CELL PARAMETERS
ZEAP OUTPUT SHORT LIST OF ADJACENT CELL PARAMETERS
ZEAT CHECK ADJACENT CELL DATA
ZEBE CREATE MOBILE ALLOCATION FREQUENCY LIST
ZEBR DELETE MOBILE ALLOCATION FREQUENCY LIST
ZEBT MODIFY MOBILE ALLOCATION FREQUENCY LIST
ZEBI OUTPUT MOBILE ALLOCATION FREQUENCY LIST(S)
ZECA CREATE MESSAGE WITH EDITOR
ZECB CREATE/MODIFY MESSAGE TEXT PAGE BY PAGE
ZECM MODIFY MESSAGE WITH EDITOR
ZECR MODIFY MESSAGE PARAMETERS
ZECS ACTIVATE MESSAGE
ZECE DEACTIVATE MESSAGE(S)
ZECC DEACTIVATE BTS(S)
ZECD DELETE MESSAGE(S)
ZECP DISPLAY MESSAGE(S)
ZECL DISPLAY BTS WORK LOAD
ZEEM MODIFY GENERAL BASE STATION CONTROLLER PARAMETERS
ZEEN MODIFY RADIO NETWORK SUPERVISION PARAMETERS
ZEEQ MODIFY MISCELLANEOUS PARAMETERS
ZEEE CONTROL ACTIVATION OF RNW PLAN
ZEEK OUTPUT RNW PLAN DATA ACTIVATION STATES
ZEEO OUTPUT BASE STATION CONTROLLER PARAMETERS
ZEEI OUTPUT RADIO NETWORK CONFIGURATION
ZEEL OUTPUT TRX RADIO TIME SLOTS
ZEFC CREATE BASE CONTROL FUNCTION
ZEFD DELETE BASE CONTROL FUNCTION
ZEFM MODIFY BASE CONTROL FUNCTION PARAMETERS
ZEFO OUTPUT BASE CONTROL FUNCTION PARAMETERS
ZEFL OUTPUT BASE CONTROL FUNCTION SYNCHRONIZATION CONFIGURATION
ZEFS CHANGE BASE CONTROL FUNCTION ADMINISTRATIVE STATE
ZEFT SET BASE CONTROL FUNCTION OUTPUTS
ZEFX SET BASE CONTROL FUNCTION EXTERNAL INPUT PARAMETERS
ZEFR RESET BASE CONTROL FUNCTION
ZEFE MODIFY EXTERNAL INPUT AND OUTPUT TEXT
ZEFP OUTPUT EXTERNAL INPUT AND OUTPUT TEXTS
ZEGO OUTPUT TIMERS/PARAMETERS
ZEGT MODIFY TIMER
ZEGP MODIFY PARAMETERS
ZEHC CREATE HANDOVER CONTROL PARAMETERS
ZEHG MODIFY GENERAL PARAMETERS
ZEHA MODIFY AVERAGING PARAMETERS
ZEHS MODIFY SIGNAL STRENGTH THRESHOLD PARAMETERS
ZEHQ MODIFY SIGNAL QUALITY THRESHOLD PARAMETERS
ZEHI MODIFY SIGNAL INTERFERENCE THRESHOLD PARAMETERS
ZEHD MODIFY MS DISTANCE PARAMETERS
ZEHN MODIFY PARAMETERS RELATED TO ADJACENT CELL
ZEHO OUTPUT HANDOVER CONTROL PARAMETERS
ZEMB BLOCK BASE CONTROL FUNCTION ALARM HANDLING
ZEMU UNBLOCK BASE CONTROL FUNCTION ALARM HANDLING
ZEME LIST BASE CONTROL FUNCTIONS ON MAINTENANCE MODE
ZEMM MODIFY MAINTENANCE MODE PARAMETERS
ZEMO OUTPUT MAINTENANCE MODE PARAMETERS
ZEOB BLOCK ALARM
ZEOU UNBLOCK ALARM
ZEOE LIST BLOCKED ALARMS
ZEOC CHANGE ALARM CLASS
ZEOM MODIFY ALARM PARAMETERS
ZEOO OUTPUT ALARM PARAMETERS
ZEOR CANCEL ALARM
ZEOH LIST ALARM HISTORY
ZEOL LIST ALARMS CURRENTLY ON
ZEQC CREATE BTS
ZEQD DELETE BTS
ZEQA MODIFY MOBILE ALLOCATION FREQUENCY LIST USAGE PARAMETERS
ZEQE MODIFY BTS IDENTIFICATION PARAMETERS
ZEQF MODIFY CELL ACCESS PARAMETERS
ZEQG MODIFY RADIO LINK CONTROL DL PARAMETERS
ZEQH MODIFY QUEUEING PARAMETERS
ZEQJ MODIFY CCH CONFIGURATION PARAMETERS
ZEQK MODIFY INTERFERENCE AVERAGING PARAMETERS
ZEQM MODIFY MISCELLANEOUS PARAMETERS
ZEQO OUTPUT BTS PARAMETERS
ZEQS CHANGE BTS ADMINISTRATIVE STATE
ZERC CREATE TRANSCEIVER
ZERD DELETE TRANSCEIVER
ZERM MODIFY TRANSCEIVER AND RADIO TIME SLOT PARAMETERS
ZERT MODIFY TRANSCEIVER BINARY OUTPUTS
ZERO OUTPUT TRANSCEIVER PARAMETERS
ZERS CHANGE TRANSCEIVER AND RADIO TIME SLOT STATE
ZETC CREATE DECISION THRESHOLD TABLE
ZETD DELETE DECISION THRESHOLD TABLE
ZETM MODIFY DECISION THRESHOLD PARAMETERS
ZETO OUTPUT DECISION THRESHOLD PARAMETERS
ZEUC CREATE POWER CONTROL PARAMETERS
ZEUG MODIFY GENERAL PARAMETERS
ZEUA MODIFY AVERAGING PARAMETERS
ZEUQ MODIFY SIGNAL QUALITY THRESHOLD PARAMETERS
ZEUS MODIFY SIGNAL STRENGTH THRESHOLD PARAMETERS
ZEUO OUTPUT POWER CONTROL PARAMETERS
ZEVC CREATE BCF HW DATABASE
ZEVD DELETE BCF HW DATABASE
ZEVA ATTACH HW DATABASE TO BCF
ZEVE DETACH HW DATABASE FROM BCF
ZEVV ACTIVATE BCF HW DATABASE
ZEVS REPLACE HW DATABASE
ZEVT LIST BCFs ATTACHED TO SAME HW DATABASE
ZEVL LIST EXISTING BCF HW DATABASES
ZEVO LIST HW DATABASE CONFIGURATION OF BCF
ZEVU UPLOAD HW DATABASE FILE(S)
ZEVR ERASE BCF NON-VOLATILE MEMORY
ZEWC CREATE BCF SOFTWARE BUILD
ZEWD DELETE BCF SOFTWARE BUILD
ZEWA ATTACH SOFTWARE BUILD TO BCF
ZEWE DETACH SOFTWARE BUILD FROM BCF
ZEWV ACTIVATE BCF SOFTWARE BUILD
ZEWH CHANGE STATUSES OF TWO BCF SOFTWARE BUILDS
ZEWS SET OR REMOVE INITIAL SOFTWARE BUILD
ZEWI LIST BCF SOFTWARE HANDLING SYSTEM ACTIVITIES
ZEWL LIST EXISTING BCF SOFTWARE BUILDS
ZEWO LIST SOFTWARE CONFIGURATION OF BCF
ZEWP LIST BCF SOFTWARE BUILD CONTENTS
ZEXA CREATE LMU AREA
ZEXR DELETE LMU AREA
ZEXB MODIFY LMU AREA PARAMETERS
ZEXI OUTPUT LMU AREA PARAMETERS
ZEYI INTERROGATE SPEECH CODEC POOL LIST(S)
ZEYM MODIFY SPEECH CODEC POOL LIST
ZEYR RESTORE SPEECH CODEC DEFAULT LISTS
ZFNS MODIFY LOCAL BEARER CHANNEL SIGNALLING PARAMETERS
ZFNO INTERROGATE LOCAL BEARER CHANNEL SIGNALLING PARAMETERS
ZFUC CREATE FRAME RELAY BEARER CHANNEL
ZFUM MODIFY FRAME RELAY BEARER CHANNEL DATA
ZFUD DELETE FRAME RELAY BEARER CHANNEL
ZFUI INTERROGATE FRAME RELAY BEARER CHANNEL DATA
ZFXC CREATE NETWORK SERVICE VIRTUAL CONNECTION
ZFXD DELETE NETWORK SERVICE VIRTUAL CONNECTION
ZFXM MODIFY NETWORK SERVICE VIRTUAL CONNECTION
ZFXS CHANGE THE STATE OF NETWORK SERVICE VIRTUAL CONNECTION
ZFXO OUTPUT THE NETWORK SERVICE VIRTUAL CONNECTION DATA
ZFXR RESET NETWORK SERVICE ENTITY
ZI2E DEFINE SSH LAYER IN UNIT
ZI2F CLEAR SSH LAYER DEFINITIONS FROM UNIT
ZI2G CONFIGURE FTP SERVER
ZI2H INTERROGATE MANAGEMENT INTERFACE CONFIGURATION
ZI2I INTERROGATE SSH LAYER CONFIGURATIONS
ZI2K GENERATE NEW SSH HOST KEY PAIR
ZI2M MODIFY SSH LAYER IN UNIT
ZI2Q CONFIGURE SFTP SERVER
ZI2S CONFIGURE SSH SERVER
ZI2T CONFIGURE TELNET
ZIAA CREATE OR MODIFY PROFILE
ZIAR DELETE PROFILE
ZIAH CREATE USER ID
ZIAD DELETE USER ID
ZIAE ATTACH PROFILE TO USER ID OR TERMINAL
ZIAG CHANGE OWN PASSWORD
ZIAS CHANGE PASSWORD OF OTHER USER ID
ZIAF CHANGE SERVICE TERMINAL PASSWORD
ZIAQ RESET LOGIN DELAYS
ZIAX MODIFY MML SESSION TIME LIMIT
ZIAK CHANGE ENCRYPTION METHOD
ZIAM CHANGE COMMAND DEFINITIONS
ZIAI INTERROGATE USER IDS, TERMINALS AND PROFILES
ZIAT INTERROGATE COMMAND DEFINITIONS
ZIAL INTERROGATE ALLOWED COMMANDS
ZIAB BLOCK/UNBLOCK COMMAND
ZIAO INTERROGATE BLOCKED COMMANDS
ZIAJ CONFIGURE DIRECTORY CLIENT
ZIAU REFRESH DIRECTORY CLIENT CONFIGURATION DATA
ZIAV INTERROGATE DIRECTORY CLIENT CONFIGURATION DATA
ZIAN CONFIGURE CENTRALIZED USER AUTHENTICATION AND AUTHORIZATION
ZIAY SET NE ACCOUNT
ZIBB COPY BYTES FROM STATISTICAL TAPE TO HARD DISK
ZIBC COPY MASS MEMORY FILES
ZIBD DELETE LAST FILE SET OF CTU
ZIBF MOVE DATA FROM DISK BUFFER OF CTU
ZIBP DUMP DATA FROM TAPE
ZIBR RESTORE DATA FROM TAPE TO LOGICAL FILE
ZIBT TYPE FILE
ZIBX DISPLAY CONTENTS OF TAPE
ZICI ADD NEW COMMAND CALENDAR TASK
ZICM MODIFY COMMAND CALENDAR TASK
ZICD DELETE COMMAND CALENDAR TASK
ZICL LIST CALENDAR
ZICT TEST COMMAND CALENDAR TASK EXECUTION
ZICB BLOCK OR UNBLOCK COMMAND CALENDAR TASK
ZICS STOP COMMAND FILE EXECUTION
ZIDE EXECUTE COMMAND FILE
ZIDS STOP COMMAND FILE EXECUTION
ZIDL LIST COMMAND FILE
ZIDX EXECUTE REMOTE COMMAND
ZIEE EDIT DISK FILE
ZIFS SET DISK FILE STATUS
ZIFA SET ALARM MODES
ZIFF DEFINE FILE AND STORING RELATED PARAMETERS
ZIFN INITIALIZE VDS DEVICE
ZIFT DEFINE TIME CONTROL FOR CHANGING DISK FILES
ZIFM MODIFY FTAM ATTRIBUTES
ZIFH DEFINE CONTROL FILE HANDLING
ZIFQ DEFINE Q3 TRANSFER UP READY PARAMETERS
ZIFC COPY DATA FILES
ZIFO DISPLAY CONTROL FILES
ZIFP DISPLAY FILE STATUS MAP
ZIFI INTERROGATE DISK FILE INFORMATION
ZIGO DISPLAY MML COMMAND LOG
ZIGK CLOSE MML COMMAND LOG FILE
ZIID DISPLAY INFORMATION OF GIVEN LOGICAL FILE
ZIIS CHANGE OBJECT CONNECTED TO LOGICAL FILE
ZIIL LIST LOGICAL FILES CONNECTED TO GIVEN OBJECT
ZIIC CHANGE OBJECT TO ANOTHER IN ALL LOGICAL FILES
ZIIF CREATE LOGICAL FILE
ZIIP CREATE SPARE LOGICAL FILE
ZIIR REMOVE LOGICAL FILE
ZIII LINK PHYSICAL DISK FILE TO LOGICAL FILE
ZIIG CHANGE SIGNALLED PROCESS
ZIMP PREMARK MAGNETIC TAPE
ZIMO OPEN FILE ON MAGNETIC TAPE
ZIMC CLOSE FILE ON MAGNETIC TAPE
ZIMR RELEASE MAGNETIC TAPE
ZIMD DISPLAY STATUS OF UNIT(S) AND TAPE(S)
ZIMT CHANGE MAGNETIC TAPE
ZIMF REOPEN FILE ON MAGNETIC TAPE
ZIMI IDENTIFY TAPE AND RESERVE UNIT
ZIMS SET TAPE TYPE
ZIME RESET TAPE UNIT
ZIMM MODIFY/INTERROGATE TAPE CODING
ZIOA ADD USER PROFILE
ZIOM ADD USER ACCESS RIGHTS
ZIOR REMOVE USER ACCESS RIGHTS
ZIOE INTERROGATE NETWORK ELEMENT USERS
ZIOI INTERROGATE USER PROFILE
ZIPI INTERROGATE GENERAL COPY TASK INFORMATION
ZIPP DISPLAY DETAILED COPY TASK LOG
ZIPS START BACKUP COPY TASK
ZIPT TERMINATE ONGOING COPY TASK
ZIPX DISPLAY BACKUP COPIES ON REMOVABLE DISK
ZIQC CONFIGURE THE DISK CACHE
ZIQS DISPLAY CACHE STATISTICS
ZIQV HANDLE DISK WRITE VERIFICATION
ZIRM MODIFY CRITICAL LIMITS
ZIRR RESET LONG TERM COUNTERS
ZIRT SET COUNTER REPORT OUTPUT TIME
ZIRI INTERROGATE COUNTER REPORT OUTPUT PARAMETERS
ZIRO DISPLAY DETAILED REPORT
ZIRP PRINT COUNTER REPORT
ZISC CHANGE I/O DEVICE STATE
ZISI INTERROGATE I/O DEVICE INFO
ZISL LIST I/O DEVICES IN SPECIFIED STATE
ZISM MODIFY SPARE DEVICE OF I/O DEVICE
ZISK MODIFY/INTERROGATE SCSI ADDRESS OF MTU
ZISF CHANGE FUNCTIONAL MODE OF CTU
ZITI INTERROGATE TERMINAL PARAMETERS
ZITM MODIFY TERMINAL PARAMETERS
ZITF SET TERMINAL OPERATION MODE
ZIVS SET PASSWORD POLICY CHECKING STATE
ZIVH SET PASSWORD HISTORY CHECKING STATE
ZIVU SET USER ACCOUNT POLICY CHECKING STATE
ZIWB HANDLE BAD BLOCKS
ZIWC CREATE FILE
ZIWD DELETE FILE
ZIWE EMPTY FILE
ZIWF INTERROGATE/CHANGE DEFAULT VERSION
ZIWI INITIALIZE DISK
ZIWK INITIALIZE DIRECTORY
ZIWL CREATE DIRECTORY
ZIWM DELETE DIRECTORY
ZIWN RENAME FILE
ZIWP PACK DISK
ZIWQ INTERROGATE/MODIFY DISK CONFIGURATION
ZIWS SET FILE ATTRIBUTES
ZIWX DISPLAY DIRECTORY
ZIWY INTERROGATE/CHANGE DEFAULT SETTINGS
ZIXF COMPRESS FILE(S) TO ZIP ARCHIVE
ZIXX EXTRACT FILE(S) FROM ZIP ARCHIVE
ZIXL LIST CONTENTS OF ZIP ARCHIVE
ZIXC COMPRESS FILE TO GZIP ARCHIVE
ZIXE EXTRACT FILE FROM GZIP ARCHIVE
ZIXI LIST CONTENTS OF GZIP ARCHIVE(S)
ZNAA CREATE GLOBAL TITLE MODIFICATION DATA
ZNAC CREATE TRANSLATION RESULT
ZNAD DELETE TRANSLATION RESULT
ZNAI INTERROGATE TRANSLATION RESULTS
ZNAM MODIFY TRANSLATION RESULT
ZNAR DELETE GLOBAL TITLE MODIFICATION DATA
ZNAS MODIFY GLOBAL TITLE MODIFICATION DATA
ZNAX INTERROGATE GLOBAL TITLE MODIFICATION DATA
ZNBC CREATE OR ADD ANALYSIS
ZNBD DELETE OR REMOVE ANALYSIS
ZNBI INTERROGATE OR SEARCH ANALYSIS
ZNBJ INTERROGATE ROOTS OF ANALYSIS TREES
ZNCC CREATE SIGNALLING LINK
ZNCM MODIFY SIGNALLING LINK
ZNCD DELETE SIGNALLING LINK
ZNCI INTERROGATE SIGNALLING LINK DATA
ZNCL CHANGE PARAMETER SET
ZNCO EXCHANGE PARAMETER SET OF SIGNALLING LINKS
ZNER INTERROGATE SIGNALLING ROUTE SET STATES
ZNES INTERROGATE SIGNALLING LINK SET STATES
ZNEL INTERROGATE SIGNALLING LINK STATES
ZNET INTERROGATE NETWORK ITEM STATES
ZNEO INTERROGATE SIGNALLING POINT LOAD SHARING
ZNEP INTERROGATE PROHIBITED STP MESSAGES
ZNEJ RUN SIGNALLING ROUTING TEST
ZNFD DEFINE SCCP FOR SIGNALLING POINT
ZNFE DEFINE SCCP FOR SIGNALLING POINTS WITH SUBSYSTEMS COPY
ZNFR REMOVE SCCP FROM SIGNALLING POINTS
ZNFA ADD REPLICATIVE SIGNALLING POINT
ZNFS REMOVE REPLICATIVE SIGNALLING POINT
ZNFB ADD SUBSYSTEMS TO SIGNALLING POINTS
ZNFT REMOVE SUBSYSTEM FROM SIGNALLING POINTS
ZNFC ADD REPLICATIVE SUBSYSTEM
ZNFU REMOVE REPLICATIVE SUBSYSTEM
ZNFI INTERROGATE SCCP DATA OF SIGNALLING POINTS
ZNFJ INTERROGATE SUBSYSTEMS DATA OF SIGNALLING POINTS
ZNFL CHANGE SCCP SIGNALLING POINT PARAMETER SET
ZNFM CHANGE SUBSYSTEM PARAMETER SET
ZNFN EXCHANGE PARAMETER SET OF SCCP SIGNALLING POINT
ZNFO EXCHANGE PARAMETER SET OF SUBSYSTEM
ZNFP CHANGE SUBSYSTEM TEST STATUS
ZNGC CHANGE SCCP STATE
ZNGD CHANGE REPLICATION STATE
ZNGI INTERROGATE SCCP STATE
ZNHC CHANGE SUBSYSTEM STATE
ZNHD CHANGE SUBSYSTEM REPLICATION STATE
ZNHI INTERROGATE SUBSYSTEM STATE
ZNHJ INTERROGATE SUBSYSTEM DISTRIBUTION DATA
ZNLC CHANGE SIGNALLING LINK STATE
ZNLD DENY ACTIVATION OF SIGNALLING LINKS
ZNLA ALLOW ACTIVATION OF SIGNALLING LINKS
ZNLI INTERROGATE SIGNALLING LINK STATES
ZNLT TEST SIGNALLING DATA LINK
ZNLO INTERROGATE SIGNALLING DATA LINK TEST
ZNLJ RUN SIGNALLING LINK ROUTING TEST
ZNMM MODIFY CCS7 LEVEL 3 PARAMETER
ZNMI INTERROGATE CCS7 LEVEL 3 PARAMETERS
ZNMC MODIFY CCS7 NETWORK SPECIFIC PARAMETER
ZNMO INTERROGATE CCS7 NETWORK SPECIFIC PARAMETERS
ZNNC CREATE SIGNALLING ROUTE SET PARAMETER SET
ZNNE COPY SIGNALLING ROUTE SET PARAMETER SET
ZNNM MODIFY SIGNALLING ROUTE SET PARAMETER SET
ZNNN CHANGE SIGNALLING ROUTE SET PARAMETER SET NAME
ZNND DELETE SIGNALLING ROUTE SET PARAMETER SET
ZNNI INTERROGATING SIGNALLING ROUTE SET PARAMETER SETS
ZNOC CREATE SIGNALLING LINK PARAMETER SET
ZNOE COPY SIGNALLING LINK PARAMETER SET
ZNOM MODIFY SIGNALLING LINK PARAMETER SET
ZNON CHANGE SIGNALLING LINK PARAMETER SET NAME
ZNOD DELETE SIGNALLING LINK PARAMETER SET
ZNOI INTERROGATE SIGNALLING LINK PARAMETER SETS
ZNPC CREATE SERVICE
ZNPM MODIFY SERVICE
ZNPD DELETE SERVICE
ZNPI INTERROGATE SERVICES
ZNPU UPDATE STP-SERVICE
ZNRP MODIFY OWN SIGNALLING POINT DATA
ZNRC CREATE SIGNALLING ROUTE SET
ZNRB MODIFY DATA OF SIGNALLING ROUTE SET
ZNRD DELETE SIGNALLING ROUTE SET
ZNRA ADD SIGNALLING ROUTE TO ROUTE SET
ZNRR DELETE SIGNALLING ROUTE FROM ROUTE SET
ZNRE CHANGE SIGNALLING ROUTE PRIORITY
ZNRN CHANGE SIGNALLING POINT NAME
ZNRI INTERROGATE SIGNALLING POINT DATA
ZNRS CHANGE STP ACCESS
ZNRT INTERROGATE STP ACCESS
ZNRX EXCHANGE ADJACENT SIGNALLING POINT CODE
ZNRV VERIFY OF MTP ROUTING DATA CHAINS
ZNRF REPAIR OF MTP ROUTING DATA CHAINS
ZNSC CREATE SIGNALLING LINK SET
ZNSA ADD SIGNALLING LINK TO LINK SET
ZNSR DELETE SIGNALLING LINK FROM LINK SET
ZNSN CHANGE SIGNALLING LINK SET NAME
ZNSS CHANGE SIGNALLING LINK CODE
ZNSD DELETE SIGNALLING LINK SET
ZNSI INTERROGATE SIGNALLING LINK SET DATA
ZNST CHANGE SIGNALLING LINK TEST STATUS
ZNSU MODIFY LINK SET DATA
ZNSE REMOTE SIGNALLING LINK IN LINK SET
ZNVC CHANGE SIGNALLING ROUTE STATE
ZNVD DENY ACTIVATION OF SIGNALLING ROUTE
ZNVA ALLOW ACTIVATION OF SIGNALLING ROUTE
ZNVI INTERROGATE SIGNALLING ROUTE STATES
ZOBM MODIFY BROADCAST STATUS OF SCCP SIGNALLING POINTS
ZOBI INTERROGATE BROADCAST STATUS OF SCCP SIGNALLING POINTS
ZOBC MODIFY LOCAL BROADCAST STATUS OF SCCP SUBSYSTEMS
ZOBL INTERROGATE LOCAL BROADCAST STATUS OF SCCP SUBSYSTEMS
ZOCC CREATE SCCP SIGNALLING POINT PARAMETER SET
ZOCA CREATE SCCP SUBSYSTEM PARAMETER SET
ZOCE COPY SCCP SIGNALLING POINT PARAMETER SET
ZOCF COPY SCCP SUBSYSTEM PARAMETER SET
ZOCM MODIFY SCCP SIGNALLING POINT PARAMETER SET
ZOCN MODIFY SCCP SUBSYSTEM PARAMETER SET
ZOCR CHANGE PARAMETER SET NAME
ZOCD DELETE SCCP SIGNALLING POINT PARAMETER SET
ZOCK DELETE SCCP SUBSYSTEM PARAMETER SET
ZOCI INTERROGATE SCCP SIGNALLING POINT PARAMETER SETS
ZOCJ INTERROGATE SCCP SUBSYSTEM PARAMETER SETS
ZOCH HELP TEXT FOR SCCP SIGNALLING POINT PARAMETERS
ZOCL HELP TEXT FOR SCCP SUBSYSTEM PARAMETERS
ZODC COPY SCCP SIGNALLING POINT SCREENING DATA FROM MTP
ZODF INTERROGATE SCCP GLOBAL TITLE SCREENING DATA
ZODG MODIFY SCCP GLOBAL TITLE SCREENING STATUS
ZODI INTERROGATE SCCP SIGNALLING POINT SCREENING DATA
ZODM MODIFY SCCP SIGNALLING POINT SCREENING DATA
ZODN MODIFY SCCP GLOBAL TITLE SCREENING DATA
ZODR INTERROGATE GT SCREENING STATUS OF CALLED GTT RESULTS
ZODS MODIFY SCCP SIGNALLING POINT SCREENING STATUS
ZODT MODIFY GT SCREENING STATUS FOR CALLED GTT RESULT
ZOIS DEFINE MAXIMUM COUNTS OF INDEXES
ZOII INTERROGATE MAXIMUM COUNTS OF INDEXES
ZOIO CONNECT OP/DP INDEX TO SIGNALLING POINT
ZOIE DELETE OP/DP INDEX
ZOID LIST ALL OP/DP INDEXES
ZOIA DELETE ALL OP/DP INDEXES
ZOIU CONNECT SI INDEX TO USER PART
ZOIC DELETE SI INDEX
ZOIP LIST ALL SI INDEXES
ZOIL DELETE ALL SI INDEXES
ZOLP INTERROGATE SIGNALLING LINK PERFORMANCE METERS
ZOLA INTERROGATE SIGNALLING LINK AVAILABILITY METERS
ZOLU INTERROGATE SIGNALLING LINK UTILIZATION METERS
ZOLT INTERROGATE SIGNALLING LINK LOAD
ZOLL INTERROGATE SIGNALLING LINK EVENT LOGS
ZOLE EMPTY SIGNALLING LINK EVENT LOGS
ZOMQ INTERROGATE LEVEL 3 AUXILIARY METERS
ZOMT INTERROGATE SIGNALLING LINK TERMINAL METERS
ZOMI INTERROGATE MTP LEVEL 2 METERS
ZOMS INTERROGATE ATM BASED SIGNALLING LINK SAAL METERS
ZONA SIGNALLING LINK SET AND ROUTE SET AVAILABILITY METERS
ZONS SIGNALLING POINT STATUS METERS
ZONP SIF AND SIO METERS HANDLED WITH SP
ZONI SIF AND SIO METERS HANDLED WITH SIO
ZONT SIF, SIO AND MSU METERS HANDLED WITH OPC, DPC AND SIO
ZONE EMPTY SIGNALLING POINT EVENT LOGS
ZONL INTERROGATE SIGNALLING POINT EVENT LOGS
ZOSA ACTIVATE SS7 STATISTICS AND REPORTS
ZOSD DEACTIVATE SS7 STATISTICS AND REPORTS
ZOSE INTERROGATE REPORTING STATUS OF SCCP SUBSYSTEMS
ZOSF MODIFY REPORTING STATUS OF SCCP SUBSYSTEMS
ZOSI INTERROGATE STATES OF SS7 STATISTICS
ZOSJ INTERROGATE REPORTING STATUS OF SIGNALLING LINKS
ZOSK INTERROGATE REPORTING STATUS OF SIGNALLING POINTS
ZOSL MODIFY REPORTING STATUS OF SIGNALLING LINKS
ZOSM MODIFY SS7 MEASUREMENT REPORT PARAMETERS
ZOSN MODIFY REPORTING STATUS OF SIGNALLING POINTS
ZOSR INTERROGATE SS7 MEASUREMENT REPORT PARAMETERS
ZOSG MODIFY STATES OF INTERVAL LOG REPORTS
ZOSQ INTERROGATE STATES OF INTERVAL LOG REPORTS
ZOTN SCCP SIGNALLING POINT METERS
ZOTS SCCP SUBSYSTEM METERS
ZOTJ SCCP SUBSYSTEM METERS OF SIGNALLING POINT
ZOTA SCCP LOCAL SUBSYSTEM AVAILABILITY METERS
ZOTI INTERROGATE SCCP SINGLE METERS
ZOTG INTERROGATE SCCP SEGMENTATION AND REASSEMBLY ERROR METERS
ZOTQ SCCP QUALITY OF SERVICE METERS
ZOTE EMPTY SCCP OR TC EVENT LOG
ZOTO INTERROGATE SCCP SIGNALLING POINT EVENT LOG
ZOTL INTERROGATE SCCP SUBSYSTEM EVENT LOG
ZOTR INTERROGATE SCCP MESSAGE HANDLING FAILURE LOG
ZOTU INTERROGATE TC UTILIZATION METERS
ZOTT INTERROGATE TC TRANSACTION METERS
ZOTP INTERROGATE TC FAULT METERS
ZOTF INTERROGATE TC EVENT LOG
ZOYC CREATE ASSOCIATION SET
ZOYA ADD ASSOCIATION TO ASSOCIATION SET
ZOYR REMOVE ASSOCIATION FROM ASSOCIATION SET
ZOYM MODIFY ASSOCIATION SET
ZOYD DELETE ASSOCIATION SET
ZOYI INTERROGATE ASSOCIATION SET
ZOYN CONFIGURATE SOURCE IP ADDRESSES FOR SCTP
ZOYG REMOVE SOURCE IP ADDRESSES FOR SCTP
ZOYL INTERROGATE SOURCE IP ADDRESSES FOR SCTP
ZOYE CREATE PARAMETER SET
ZOYF DELETE PARAMETER SET
ZOYT MODIFY PARAMETER SET
ZOYO INTERROGATE PARAMETER SET
ZOYX CREATE SCTP ASSOCIATION
ZOYP MANAGE ASSOCIATION IP ADDRESSES
ZOYY DELETE SCTP ASSOCIATION
ZOYV INTERROGATE SCTP ASSOCIATION
ZOYW MODIFY SCTP ASSOCIATION
ZOYS MODIFY ASSOCIATION STATE
ZOYQ INTERROGATE AVERAGE M3UA CPU LOAD
ZQ4A ADD KEY
ZQ4M MODIFY KEY VALUE
ZQ4N RENAME KEY
ZQ4D DELETE KEY
ZQ4L LIST KEYS
ZQ6N CONFIGURE NETWORK INTERFACE AND IP ADDRESS
ZQ6G REMOVE NETWORK INTERFACE OR IP ADDRESS
ZQ6W FORCE INTERFACE SWITCHOVER
ZQ6I INTERROGATE NETWORK INTERFACE
ZQ6T CONFIGURE TCP/IP PARAMETERS
ZQ6H INTERROGATE TCP/IP PARAMETERS
ZQ6C CREATE STATIC ROUTE
ZQ6D DELETE STATIC ROUTE DATA
ZQ6L INTERROGATE STATIC ROUTES
ZQ6K CONFIGURE DNS PARAMETERS
ZQ6J INTERROGATE DNS PARAMETERS
ZQ6F DISTRIBUTE CONFIGURATION FILE
ZQ6X TEST HOST REACHABILITY (PING6/TRACEROUTE6)
ZQ6S INTERROGATE NETWORK STATUS
ZQ6Y INTERROGATE NEIGHBOR CACHE
ZQBC CREATE NETWORK ADDRESS
ZQBD DELETE NETWORK ADDRESS
ZQBI INTERROGATE NETWORK ADDRESS DATA
ZQBN CREATE NSAP
ZQBM MODIFY NSAP DATA
ZQBR DELETE NSAP
ZQBT ATTACH NSAP TO NETWORK ADDRESS
ZQBF DETACH NSAP FROM NETWORK ADDRESS
ZQBH SET DEFAULT VALUES FOR ISO DCC AND ISO 6253-ICD NSAP
ZQBG CHANGE NSAP STATE
ZQBL INTERROGATE NETWORK NSAP DATA
ZQCC CREATE PHYSICAL CHANNEL THROUGH DIGITAL TERMINAL
ZQCS CREATE PHYSICAL CHANNEL THROUGH ANALOG TERMINAL
ZQCM MODIFY PHYSICAL CHANNEL THROUGH DIGITAL TERMINAL
ZQCU MODIFY PHYSICAL CHANNEL THROUGH ANALOG TERMINAL
ZQCD DELETE PHYSICAL CHANNEL
ZQCI INTERROGATE PHYSICAL CHANNEL DATA
ZQDL CREATE LOCAL OSI APPLICATION
ZQDR CREATE REMOTE OSI APPLICATION
ZQDM MODIFY LOCAL OSI APPLICATION DATA
ZQDH MODIFY REMOTE OSI APPLICATION DATA
ZQDN MODIFY OSI APPLICATION NAME
ZQDD DELETE OSI APPLICATION
ZQDI INTERROGATE OSI APPLICATION DATA
ZQDA ADD SERVICE PROFILE TO OSI APPLICATION
ZQDC MODIFY SERVICE PROFILE OF OSI APPLICATION
ZQDE DETACH SERVICE PROFILE FROM OSI APPLICATION
ZQDT ATTACH SECONDARY SELECTOR GROUP TO OSI APPLICATION
ZQDF DETACH OR MODIFY SECONDARY SELECTOR GROUP
ZQDG CHANGE OSI APPLICATION STATE
ZQEC CREATE CLNS
ZQEM MODIFY CLNS DATA
ZQEA ADD MANUAL AREA ADDRESS TO CLNS
ZQER REMOVE MANUAL AREA ADDRESS FROM CLNS
ZQEN MODIFY CLNS NAME
ZQEF MODIFY CLNS PARAMETERS
ZQET RESTART CLNS
ZQEG CHANGE CLNS STATE
ZQED DELETE CLNS
ZQEH ACCEPT NEW CLNS
ZQEI INTERROGATE CLNS DATA
ZQFA COPY FILE
ZQFC CREATE FILE
ZQFD DELETE FILE
ZQFL LIST FILE DIRECTORY
ZQFM MODIFY FILE ATTRIBUTES
ZQGC CREATE PHYSICAL CHANNEL GROUP
ZQGA ADD PHYSICAL CHANNEL TO PHYSICAL CHANNEL GROUP
ZQGR DELETE PHYSICAL CHANNEL FROM PHYSICAL CHANNEL GROUP
ZQGN CHANGE PHYSICAL CHANNEL GROUP NAME
ZQGM CHANGE PHYSICAL CHANNEL DATA
ZQGD DELETE PHYSICAL CHANNEL GROUP
ZQGI INTERROGATE PHYSICAL CHANNEL GROUP DATA
ZQHC CREATE ETHERNET TERMINAL DATA
ZQHM MODIFY ETHERNET TERMINAL DATA
ZQHD DELETE ETHERNET TERMINAL DATA
ZQHI INTERROGATE ETHERNET TERMINAL DATA
ZQHQ INTERROGATE ETHERNET INTERFACE LINK PARAMETERS
ZQHR RESET ETHERNET INTERFACE STATISTICS
ZQHS SET ETHERNET INTERFACE LINK PARAMETERS
ZQHT DISPLAY ETHERNET INTERFACE STATISTICS
ZQHW DELETE CONFIGURATION OF ETHERNET INTERFACE
ZQKM CREATE LOCAL IP ADDRESS BASED DEFAULT GATEWAY
ZQKP DELETE LOCAL IP ADDRESS BASED DEFAULT GATEWAY
ZQKO INTERROGATE LOCAL IP ADDRESS BASED DEFAULT GATEWAYS
ZQKC CREATE STATIC ROUTE
ZQKA DELETE STATIC ROUTE